// This renders the sorted sector surfaces
internal void RenderSectorSurfaces(RenderDevice graphics)
{
if (!resourcesunloaded)
{
ShaderName pass = Renderer.FullBrightness ? ShaderName.display2d_fullbright : ShaderName.display2d_normal; //mxd
foreach (KeyValuePair <ImageData, List <SurfaceEntry> > imgsurfaces in surfaces)
{
graphics.SetShader(pass);
graphics.SetTexture(imgsurfaces.Key.Texture);
// Go for all surfaces
VertexBuffer lastbuffer = null;
foreach (SurfaceEntry entry in imgsurfaces.Value)
{
graphics.SetUniform(UniformName.desaturation, entry.desaturation);
// Set the vertex buffer
SurfaceBufferSet set = sets[entry.numvertices];
if (set.buffers[entry.bufferindex] != lastbuffer)
{
lastbuffer = set.buffers[entry.bufferindex];
graphics.SetVertexBuffer(lastbuffer);
}
// Draw
graphics.Draw(PrimitiveType.TriangleList, entry.vertexoffset + (entry.numvertices * surfacevertexoffsetmul), entry.numvertices / 3);
}
}
graphics.SetUniform(UniformName.desaturation, 0.0f);
}
}
// This renders the sorted sector surfaces
internal void RenderSectorSurfaces(D3DDevice graphics)
{
if (!resourcesunloaded)
{
int pass = Renderer.FullBrightness ? 2 : 1; //mxd
graphics.Shaders.Display2D.Begin();
foreach (KeyValuePair <ImageData, List <SurfaceEntry> > imgsurfaces in surfaces)
{
// Set texture
graphics.Shaders.Display2D.Texture1 = imgsurfaces.Key.Texture;
graphics.Shaders.Display2D.BeginPass(pass);
// Go for all surfaces
VertexBuffer lastbuffer = null;
foreach (SurfaceEntry entry in imgsurfaces.Value)
{
// Set the vertex buffer
SurfaceBufferSet set = sets[entry.numvertices];
if (set.buffers[entry.bufferindex] != lastbuffer)
{
lastbuffer = set.buffers[entry.bufferindex];
graphics.Device.SetStreamSource(0, lastbuffer, 0, FlatVertex.Stride);
}
// Draw
graphics.Device.DrawPrimitives(PrimitiveType.TriangleList, entry.vertexoffset + (entry.numvertices * surfacevertexoffsetmul), entry.numvertices / 3);
}
graphics.Shaders.Display2D.EndPass();
}
graphics.Shaders.Display2D.End();
}
}
// Updating sector surface geometry should go in this order;
// - Triangulate sectors
// - Call FreeSurfaces to remove entries that have changed number of vertices
// - Call AllocateBuffers
// - Call UpdateSurfaces to add/update entries
// - Call UnlockBuffers
// This (re)allocates the buffers based on an analysis of the map
// The map must be updated (triangulated) before calling this
public void AllocateBuffers()
{
// Make analysis of sector geometry
Dictionary <int, int> sectorverts = new Dictionary <int, int>();
foreach (Sector s in General.Map.Map.Sectors)
{
if (s.Triangles != null)
{
// We count the number of sectors that have specific number of vertices
if (!sectorverts.ContainsKey(s.Triangles.Vertices.Count))
{
sectorverts.Add(s.Triangles.Vertices.Count, 0);
}
sectorverts[s.Triangles.Vertices.Count]++;
}
}
// Now (re)allocate the needed buffers
foreach (KeyValuePair <int, int> sv in sectorverts)
{
// Zero vertices can't be drawn
if (sv.Key > 0)
{
SurfaceBufferSet set = GetSet(sv.Key);
// Calculte how many free entries we need
int neededentries = sv.Value;
int freeentriesneeded = neededentries - set.entries.Count;
// Allocate the space needed
EnsureFreeBufferSpace(set, freeentriesneeded);
}
}
}
// This frees the given surface entry
public void FreeSurfaces(SurfaceEntry entry)
{
if ((entry.numvertices > 0) && (entry.bufferindex > -1))
{
SurfaceBufferSet set = sets[entry.numvertices];
set.entries.Remove(entry);
SurfaceEntry newentry = new SurfaceEntry(entry);
set.holes.Add(newentry);
}
entry.numvertices = -1;
entry.bufferindex = -1;
}
// This frees the given surface entry
public void FreeSurfaces(SurfaceEntryCollection entries)
{
foreach (SurfaceEntry e in entries)
{
if ((e.numvertices > 0) && (e.bufferindex > -1))
{
SurfaceBufferSet set = sets[e.numvertices];
set.entries.Remove(e);
SurfaceEntry newentry = new SurfaceEntry(e);
set.holes.Add(newentry);
}
e.numvertices = -1;
e.bufferindex = -1;
}
}
// Updating sector surface geometry should go in this order;
// - Triangulate sectors
// - Call FreeSurfaces to remove entries that have changed number of vertices
// - Call AllocateBuffers
// - Call UpdateSurfaces to add/update entries
// - Call UnlockBuffers
// This (re)allocates the buffers based on an analysis of the map
// The map must be updated (triangulated) before calling this
public void AllocateBuffers()
{
// Make analysis of sector geometry
Dictionary <int, int> sectorverts = new Dictionary <int, int>();
foreach (Sector s in General.Map.Map.Sectors)
{
if (s.Triangles != null)
{
int numvertices = s.Triangles.Vertices.Count;
while (numvertices > 0)
{
// Determine for how many vertices in this entry
int vertsinentry = (numvertices > MAX_VERTICES_PER_SECTOR) ? MAX_VERTICES_PER_SECTOR : numvertices;
// We count the number of sectors that have specific number of vertices
if (!sectorverts.ContainsKey(vertsinentry))
{
sectorverts.Add(vertsinentry, 0);
}
sectorverts[vertsinentry]++;
numvertices -= vertsinentry;
}
}
}
// Now (re)allocate the needed buffers
foreach (KeyValuePair <int, int> sv in sectorverts)
{
// Zero vertices can't be drawn
if (sv.Key > 0)
{
SurfaceBufferSet set = GetSet(sv.Key);
// Calculte how many free entries we need
int neededentries = sv.Value;
int freeentriesneeded = neededentries - set.entries.Count;
// Allocate the space needed
EnsureFreeBufferSpace(set, freeentriesneeded);
}
}
}
// This renders the sorted sector surfaces
internal void RenderSectorSurfaces(D3DDevice graphics)
{
int counter = 0;
if (!resourcesunloaded)
{
graphics.Shaders.Display2D.Begin();
foreach (KeyValuePair <ImageData, List <SurfaceEntry> > imgsurfaces in surfaces)
{
// Set texture
graphics.Shaders.Display2D.Texture1 = imgsurfaces.Key.Texture;
if (!graphics.Shaders.Enabled)
{
graphics.Device.SetTexture(0, imgsurfaces.Key.Texture);
}
graphics.Shaders.Display2D.BeginPass(1);
// Go for all surfaces
VertexBuffer lastbuffer = null;
foreach (SurfaceEntry entry in imgsurfaces.Value)
{
// Set the vertex buffer
SurfaceBufferSet set = sets[entry.numvertices];
if (set.buffers[entry.bufferindex] != lastbuffer)
{
lastbuffer = set.buffers[entry.bufferindex];
graphics.Device.SetStreamSource(0, lastbuffer, 0, FlatVertex.Stride);
}
// Draw
counter++;
graphics.Device.DrawPrimitives(PrimitiveType.TriangleList, entry.vertexoffset + (entry.numvertices * surfacevertexoffsetmul), entry.numvertices / 3);
}
graphics.Shaders.Display2D.EndPass();
}
graphics.Shaders.Display2D.End();
}
Console.WriteLine("Calls: " + counter);
}
// This gets or creates a set for a specific number of vertices
private SurfaceBufferSet GetSet(int numvertices)
{
SurfaceBufferSet set;
// Get or create the set
if (!sets.ContainsKey(numvertices))
{
set = new SurfaceBufferSet();
set.numvertices = numvertices;
set.buffers = new List <VertexBuffer>();
set.buffersizes = new List <int>();
set.entries = new List <SurfaceEntry>();
set.holes = new List <SurfaceEntry>();
sets.Add(numvertices, set);
}
else
{
set = sets[numvertices];
}
return(set);
}
// This adds or updates sector geometry into a buffer.
// Modiies the list of SurfaceEntries with the new surface entry for the stored geometry.
public void UpdateSurfaces(SurfaceEntryCollection entries, SurfaceUpdate update)
{
// Free entries when number of vertices has changed
if ((entries.Count > 0) && (entries.totalvertices != update.numvertices))
{
FreeSurfaces(entries);
entries.Clear();
}
if ((entries.Count == 0) && (update.numvertices > 0))
{
#if DEBUG
if ((update.floorvertices == null) || (update.ceilvertices == null))
{
General.Fail("We need both floor and ceiling vertices when the number of vertices changes!");
}
#endif
// If we have no entries yet, we have to make them now
int vertsremaining = update.numvertices;
while (vertsremaining > 0)
{
// Determine for how many vertices in this entry
int vertsinentry = (vertsremaining > MAX_VERTICES_PER_SECTOR) ? MAX_VERTICES_PER_SECTOR : vertsremaining;
// Lookup the set that holds entries for this number of vertices
SurfaceBufferSet set = GetSet(vertsinentry);
// Make sure we can get a new entry in this set
EnsureFreeBufferSpace(set, 1);
// Get a new entry in this set
SurfaceEntry e = set.holes[set.holes.Count - 1];
set.holes.RemoveAt(set.holes.Count - 1);
set.entries.Add(e);
// Fill the entry data
e.floorvertices = new FlatVertex[vertsinentry];
e.ceilvertices = new FlatVertex[vertsinentry];
Array.Copy(update.floorvertices, update.numvertices - vertsremaining, e.floorvertices, 0, vertsinentry);
Array.Copy(update.ceilvertices, update.numvertices - vertsremaining, e.ceilvertices, 0, vertsinentry);
e.floortexture = update.floortexture;
e.ceiltexture = update.ceiltexture;
e.desaturation = update.desaturation;
entries.Add(e);
vertsremaining -= vertsinentry;
}
}
else
{
// We re-use the same entries, just copy over the updated data
int vertsremaining = update.numvertices;
foreach (SurfaceEntry e in entries)
{
if (update.floorvertices != null)
{
Array.Copy(update.floorvertices, update.numvertices - vertsremaining, e.floorvertices, 0, e.numvertices);
e.floortexture = update.floortexture;
}
if (update.ceilvertices != null)
{
Array.Copy(update.ceilvertices, update.numvertices - vertsremaining, e.ceilvertices, 0, e.numvertices);
e.ceiltexture = update.ceiltexture;
}
e.desaturation = update.desaturation;
vertsremaining -= e.numvertices;
}
}
entries.totalvertices = update.numvertices;
// Time to update or create the buffers
foreach (SurfaceEntry e in entries)
{
SurfaceBufferSet set = GetSet(e.numvertices);
// Update bounding box
e.UpdateBBox();
if (!resourcesunloaded)
{
VertexBuffer vb = set.buffers[e.bufferindex];
General.Map.Graphics.SetBufferSubdata(vb, e.vertexoffset, e.floorvertices);
General.Map.Graphics.SetBufferSubdata(vb, e.vertexoffset + e.floorvertices.Length, e.ceilvertices);
}
}
}
// This ensures there is enough space for a given number of free entries (also adds new bufers if needed)
private void EnsureFreeBufferSpace(SurfaceBufferSet set, int freeentries)
{
VertexBuffer vb = null;
// Check if we have to add entries
int addentries = freeentries - set.holes.Count;
// Begin resizing buffers starting with the last in this set
int bufferindex = set.buffers.Count - 1;
// Calculate the maximum number of entries we can put in a new buffer
// Note that verticesperentry is the number of vertices multiplied by 2, because
// we have to store both the floor and ceiling
int verticesperentry = set.numvertices * 2;
int maxentriesperbuffer = MAX_VERTICES_PER_BUFFER / verticesperentry;
// Make a new bufer when the last one is full
if ((bufferindex > -1) && (set.buffersizes[bufferindex] >= (maxentriesperbuffer * verticesperentry)))
{
bufferindex = -1;
}
while (addentries > 0)
{
// Create a new buffer?
if ((bufferindex == -1) || (bufferindex > (set.buffers.Count - 1)))
{
// Determine the number of entries we will be making this buffer for
int bufferentries = (addentries > maxentriesperbuffer) ? maxentriesperbuffer : addentries;
// Calculate the number of vertices that will be
int buffernumvertices = bufferentries * verticesperentry;
if (!resourcesunloaded)
{
// Make the new buffer!
vb = new VertexBuffer();
General.Map.Graphics.SetBufferData(vb, buffernumvertices, VertexFormat.Flat);
// Add it.
set.buffers.Add(vb);
}
else
{
// We can't make a vertexbuffer right now
set.buffers.Add(null);
}
// Also add available entries as holes, because they are not used yet.
set.buffersizes.Add(buffernumvertices);
for (int i = 0; i < bufferentries; i++)
{
set.holes.Add(new SurfaceEntry(set.numvertices, set.buffers.Count - 1, i * verticesperentry));
}
// Done
addentries -= bufferentries;
}
// Reallocate a buffer
else
{
if ((set.buffers[bufferindex] != null) && !resourcesunloaded)
{
set.buffers[bufferindex].Dispose();
}
// Get the entries that are in this buffer only
List <SurfaceEntry> theseentries = new List <SurfaceEntry>();
foreach (SurfaceEntry e in set.entries)
{
if (e.bufferindex == bufferindex)
{
theseentries.Add(e);
}
}
// Determine the number of entries we will be making this buffer for
int bufferentries = ((theseentries.Count + addentries) > maxentriesperbuffer) ? maxentriesperbuffer : (theseentries.Count + addentries);
// Calculate the number of vertices that will be
int buffernumvertices = bufferentries * verticesperentry;
if (!resourcesunloaded)
{
// Make the new buffer and lock it
vb = new VertexBuffer();
General.Map.Graphics.SetBufferData(vb, buffernumvertices, VertexFormat.Flat);
}
// Start refilling the buffer with sector geometry
int vertexoffset = 0;
foreach (SurfaceEntry e in theseentries)
{
if (!resourcesunloaded)
{
// Fill buffer
General.Map.Graphics.SetBufferSubdata(vb, vertexoffset, e.floorvertices);
General.Map.Graphics.SetBufferSubdata(vb, vertexoffset + e.floorvertices.Length, e.ceilvertices);
}
// Set the new location in the buffer
e.vertexoffset = vertexoffset;
// Move on
vertexoffset += verticesperentry;
}
if (!resourcesunloaded)
{
set.buffers[bufferindex] = vb;
}
else
{
// No vertex buffer at this time, sorry
set.buffers[bufferindex] = null;
}
// Set the new buffer and add available entries as holes, because they are not used yet.
set.buffersizes[bufferindex] = buffernumvertices;
set.holes.Clear();
for (int i = 0; i < bufferentries - theseentries.Count; i++)
{
set.holes.Add(new SurfaceEntry(set.numvertices, bufferindex, i * verticesperentry + vertexoffset));
}
// Done
addentries -= bufferentries;
}
// Always continue in next (new) buffer
bufferindex = set.buffers.Count;
}
}
// This adds or updates sector geometry into a buffer.
// Modiies the list of SurfaceEntries with the new surface entry for the stored geometry.
public void UpdateSurfaces(SurfaceEntryCollection entries, SurfaceUpdate update)
{
// Free entries when number of vertices has changed
if ((entries.Count > 0) && (entries.totalvertices != update.numvertices))
{
FreeSurfaces(entries);
entries.Clear();
}
if ((entries.Count == 0) && (update.numvertices > 0))
{
#if DEBUG
if ((update.floorvertices == null) || (update.ceilvertices == null))
{
General.Fail("We need both floor and ceiling vertices when the number of vertices changes!");
}
#endif
// If we have no entries yet, we have to make them now
int vertsremaining = update.numvertices;
while (vertsremaining > 0)
{
// Determine for how many vertices in this entry
int vertsinentry = (vertsremaining > MAX_VERTICES_PER_SECTOR) ? MAX_VERTICES_PER_SECTOR : vertsremaining;
// Lookup the set that holds entries for this number of vertices
SurfaceBufferSet set = GetSet(vertsinentry);
// Make sure we can get a new entry in this set
EnsureFreeBufferSpace(set, 1);
// Get a new entry in this set
SurfaceEntry e = set.holes[set.holes.Count - 1];
set.holes.RemoveAt(set.holes.Count - 1);
set.entries.Add(e);
// Fill the entry data
e.floorvertices = new FlatVertex[vertsinentry];
e.ceilvertices = new FlatVertex[vertsinentry];
Array.Copy(update.floorvertices, update.numvertices - vertsremaining, e.floorvertices, 0, vertsinentry);
Array.Copy(update.ceilvertices, update.numvertices - vertsremaining, e.ceilvertices, 0, vertsinentry);
e.floortexture = update.floortexture;
e.ceiltexture = update.ceiltexture;
entries.Add(e);
vertsremaining -= vertsinentry;
}
}
else
{
// We re-use the same entries, just copy over the updated data
int vertsremaining = update.numvertices;
foreach (SurfaceEntry e in entries)
{
if (update.floorvertices != null)
{
Array.Copy(update.floorvertices, update.numvertices - vertsremaining, e.floorvertices, 0, e.numvertices);
e.floortexture = update.floortexture;
}
if (update.ceilvertices != null)
{
Array.Copy(update.ceilvertices, update.numvertices - vertsremaining, e.ceilvertices, 0, e.numvertices);
e.ceiltexture = update.ceiltexture;
}
vertsremaining -= e.numvertices;
}
}
entries.totalvertices = update.numvertices;
// Time to update or create the buffers
foreach (SurfaceEntry e in entries)
{
SurfaceBufferSet set = GetSet(e.numvertices);
// Update bounding box
e.UpdateBBox();
if (!resourcesunloaded)
{
// Lock the buffer
DataStream bstream;
VertexBuffer vb = set.buffers[e.bufferindex];
if (vb.Tag == null)
{
// Note: DirectX warns me that I am not using LockFlags.Discard or LockFlags.NoOverwrite here,
// but we don't have much of a choice since we want to update our data and not destroy other data
bstream = vb.Lock(0, set.buffersizes[e.bufferindex] * FlatVertex.Stride, LockFlags.None);
vb.Tag = bstream;
lockedbuffers.Add(vb);
}
else
{
bstream = (DataStream)vb.Tag;
}
// Write the vertices to buffer
bstream.Seek(e.vertexoffset * FlatVertex.Stride, SeekOrigin.Begin);
bstream.WriteRange(e.floorvertices);
bstream.WriteRange(e.ceilvertices);
}
}
}
// This adds or updates sector geometry into a buffer.
// Always specify the entry when a previous entry was already given for that sector!
// Sector must set the floorvertices and ceilvertices members on the entry.
// Returns the new surface entry for the stored geometry, floorvertices and ceilvertices will be preserved.
public SurfaceEntry UpdateSurfaces(SurfaceEntry entry)
{
if (entry.floorvertices.Length != entry.ceilvertices.Length)
{
General.Fail("Floor vertices has different length from ceiling vertices!");
}
int numvertices = entry.floorvertices.Length;
// Free entry when number of vertices have changed
if ((entry.numvertices != numvertices) && (entry.numvertices != -1))
{
FreeSurfaces(entry);
}
// Check if we can render this at all
if (numvertices > 0)
{
SurfaceBufferSet set = GetSet(numvertices);
// Update bounding box
entry.UpdateBBox();
// Check if we need a new entry
if (entry.numvertices == -1)
{
EnsureFreeBufferSpace(set, 1);
SurfaceEntry nentry = set.holes[set.holes.Count - 1];
set.holes.RemoveAt(set.holes.Count - 1);
nentry.ceilvertices = entry.ceilvertices;
nentry.floorvertices = entry.floorvertices;
nentry.floortexture = entry.floortexture;
nentry.ceiltexture = entry.ceiltexture;
nentry.bbox = entry.bbox;
set.entries.Add(nentry);
entry = nentry;
}
if (!resourcesunloaded)
{
// Lock the buffer
DataStream bstream;
VertexBuffer vb = set.buffers[entry.bufferindex];
if (vb.Tag == null)
{
// Note: DirectX warns me that I am not using LockFlags.Discard or LockFlags.NoOverwrite here,
// but we don't care (we don't have much of a choice since we want to update our data)
bstream = vb.Lock(0, set.buffersizes[entry.bufferindex] * FlatVertex.Stride, LockFlags.None);
vb.Tag = bstream;
lockedbuffers.Add(vb);
}
else
{
bstream = (DataStream)vb.Tag;
}
// Write the vertices to buffer
bstream.Seek(entry.vertexoffset * FlatVertex.Stride, SeekOrigin.Begin);
bstream.WriteRange(entry.floorvertices);
bstream.WriteRange(entry.ceilvertices);
}
}
return(entry);
}
