// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler(new ExceptionHandlerOptions
{
ExceptionHandler = async context =>
{
context.Response.ContentType = "text/plain";
await context.Response.WriteAsync("Welcome to the error page.");
}
});
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>().ReverseMap();
cfg.CreateMap <Entities.City, Models.CityDto>().ReverseMap();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>().ReverseMap();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForCreationDto>().ReverseMap();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>().ReverseMap();
});
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
// sends exceptions to logging framework
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
// returns status codes in response body so visible in browsers
app.UseStatusCodePages();
// MVC middleware
app.UseMvc();
//app.Run(context =>
//{
// throw new Exception("Bad");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
// These two were already added in CreateDefaultBuilder from .NetCore 2.2
// No need to add it again
// loggerFactory.AddConsole();
// loggerFactory.AddDebug();
// loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
// app.Run(async (context) =>
// {
// await context.Response.WriteAsync("Hello World!");
// });
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <City, Models.CityDto>();
cfg.CreateMap <PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, PointOfInterest>();
cfg.CreateMap <PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app,
IHostingEnvironment env,
CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception("Exception occured");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddDebug();
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg => {
cfg.CreateMap <Entities.City, Models.CityWithoutPointOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfIntrestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfIntrestDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
//cfg.CreateMap<List<Entities.PointOfInterest>, List<Models.PointOfIntrestDto>>();
});
app.UseMvc();
//app.UseMvcWithDefaultRoute();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
ConfigureMappings();
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
// The default HSTS value is 30 days. You may want to change this for production scenarios, see https://aka.ms/aspnetcore-hsts.
app.UseHsts();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseHttpsRedirection();
AutoMapper.Mapper.Initialize(cfg =>
{
// database -> dto
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
// dto -> database
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
});
app.UseMvc();
app.UseStatusCodePages();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IWebHostEnvironment env,
CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
app.UseMvc();
app.UseRouting();
app.UseEndpoints(endpoints =>
{
endpoints.MapGet("/", async context =>
{
await context.Response.WriteAsync("Hello World!");
});
});
app.UseOpenApi();
app.UseSwaggerUi3();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerfactory, CityInfoContext cityInfoContext)
{
loggerfactory.AddConsole();
loggerfactory.AddDebug();
// loggerfactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
loggerfactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
// app.Run((contex) => { throw new Exception("Example exception"); });
else
{
app.UseHsts();
}
cityInfoContext.EnsureSeedDataForContext();
//Format status code
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(c => {
c.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
c.CreateMap <Entities.City, Models.CityDto>();
c.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
c.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
c.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
c.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseHttpsRedirection();
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDTO>();
cfg.CreateMap <Entities.City, Models.CitiesDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointsOfInterestDTO>();
});
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug(LogLevel.Information);
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
//Use AutoMapper library (initialize the mappings you're planning to need)
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
loggerFactory.AddNLog();
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
});
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages(); // I enabled it to see status code text sample pages in browser :)
// Using AutoMapper to automaticly map entities to my dto objects.s
AutoMapper.Mapper.Initialize(cfg => {
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestsDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
//loggerFactory.AddNLog(); - 7/9/18 - Not supported by 2.0
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
// seed the database
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
// database row to model information (return only the data we need)
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
//else
//{
// app.UseExceptionHandler();
//}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <City, CityWithoutPointsOfInterestDto>();
cfg.CreateMap <City, CityDto>();
cfg.CreateMap <PointOfInterest, PointOfInterestDto>();
cfg.CreateMap <PointOfInterestForCreationDto, PointOfInterest>();
cfg.CreateMap <PointOfInterestForUpdateDto, PointOfInterest>();
cfg.CreateMap <PointOfInterest, PointOfInterestForUpdateDto>();
});
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception("Example exception");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
//loggerFactory.AddConsole();
//loggerFactory.AddDebug();
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
// Add seed data to database.
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
// cfg.CreateMap<Entities.PointOfInterest, Models.PointOfInterestForCreationDto>()
// .ForMember(x => x.Id, opt => opt.Ignore());
// cfg.CreateMap<Entities.City, Models.CityWithoutPointsOfInterestDto>();
// cfg.CreateMap<Entities.City, Models.CityDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>()
.ForMember(dest => dest.Id, opt => opt.Ignore());
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>()
.ForMember(dest => dest.Id, opt => opt.Ignore());
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
// AddDebug causes any debug errors to log to the 'Debug' output window
// loggerFactory.AddConsole();
loggerFactory.AddDebug();
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
// adds an exception handler page when not in dev environment
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
// Status Code Pages middleware
app.UseStatusCodePages();
// Use Automapper package to create a map from endpoint of entities to the dtos we are returning from API actions
AutoMapper.Mapper.Initialize(cfg =>
{
// mapping for GET requests
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
// CityDto includes a list of interests, so it should also map from POI to it's Dto for City>CityDto to work
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
// mapping for creating objects (POST)
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
//mapping for updating a resource (PUT)
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
// mapping for partial updating (PATCH)
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseMvc();
// Uncomment below block to see the exception handler page
//app.Run((context) =>
//{
// throw new Exception("Example exception");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
//loggerFactory.AddConsole();
//loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler("/error");
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
app.UseMvc();
Mapper.Initialize(cfg =>
{
// Way 1
cfg.CreateMap <City, CityWithoutPointsOfInterestDto>();
cfg.CreateMap <City, CityDto>();
cfg.CreateMap <PointOfInterestForCreationDto, PointOfInterest>();
cfg.CreateMap <PointOfInterest, PointOfInterestDto>();
cfg.CreateMap <PointOfInterestForUpdateDto, PointOfInterest>();
cfg.CreateMap <PointOfInterest, PointOfInterestForUpdateDto>();
// cfg.CreateMap<Entities.PointOfInterest, Models.PointOfInterestDto>(); // Don't need for AutoMapper 7.x.x
// Way 2
//cfg.CreateMap(typeof(City), typeof(CityWithoutPointsOfInterestDto));
});
// Convention-based routing
// Typically for using MVC framework to build a web application with HTML-returning views.
// For web api, using attribute-based routing.
//app.UseMvc(config =>
//{
// config.MapRoute(
// name: "Default",
// template: "{controller}/{action}/{id?}",
// defaults: new { controller = "Home", action = "Index" });
//});
//app.Run(async (context) =>
//{
// throw new Exception("example exception");
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
//Long way to add the nLogger extension to loggerFactory
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
//Short-cut. Now we're also logging out to a file.
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
//Seed the database with data
cityInfoContext.EnsureSeedDataForContext();
//Create mappings from the application's DTOs to their respective entity classes returned from Sql.
AutoMapper.Mapper.Initialize(cfg =>
{
//Syntax is CreateMap(SourceType, DestinationType). In other words: From an Entity to a DTO object
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
//You can create multiple mappings. In this case, getting a city back should match to both the CityDto and the CityWithoutPointsOfInterestDto
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
//For POST (i.e. creating a POI, the arguments are reveresed because the Entities.POI is the destination type).
cfg.CreateMap <Models.PointOfInterestForCreation, Entities.PointOfInterest>();
//For updating with PUT
cfg.CreateMap <Models.PointOfInterestForUpdate, Entities.PointOfInterest>();
//For updating with Patch. We need the other way around since we're mapping an entity to a POIForUpdate dto.
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdate>();
});
// Show Error pages when the consuming browser gets an error (e.g. instead of a silent 404 error)
//app.UseStatusCodePages();
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext) //LD STEP29 be sure that the configuration method accept the context
{
//loggerFactory.AddConsole();
//LD STEP22
loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
//loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
//LD friendly exeption page
//app.UseExceptionHandler();
}
////LD STEP1
//LD STEP29
cityInfoContext.EnsureSeedDataForContext();
//LD STEP9
app.UseStatusCodePages();
//LD STEP35
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
//LD STEP2 we are adding MVC after the exception handler
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception("Example exception");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
// No need to add these loggers in ASP.NET Core 2.0: the call to WebHost.CreateDefaultBuilder(args)
// in the Program class takes care of that.
//loggerFactory.AddConsole();
//loggerFactory.AddDebug();
// Use NLog
loggerFactory.AddNLog();
// Display detailed exception page, when the environment in Project properties is set to Development
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
// Seed data, if required
cityInfoContext.EnsureSeedDataForContext();
// Use simple status code page for HTTP response
app.UseStatusCodePages();
// Use Automapper to map entity objects and DTOs
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
});
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception("Example exception");
//});
// This will always return Hello World for HTTP response
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseMvc();
// app.Run(async (context) =>
// {
// await context.Response.WriteAsync("Hello World!");
// });
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
loggerFactory.AddConsole();
cityInfoContext.EnsureSeedDataForContext();
loggerFactory.AddDebug();
loggerFactory.AddNLog();
app.UseMvc();
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory, CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
cityInfoContext.EnsureSeedDataForContext();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Model.CityWithoutPointOfInterestDto>();
cfg.CreateMap <Entities.City, Model.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Model.PointOfInterestDto>();
cfg.CreateMap <Model.PointOfInterestDto, Entities.PointOfInterest>();
cfg.CreateMap <Model.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Model.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Model.PointOfInterestForUpdateDto>();
});
app.UseStatusCodePages();
app.UseMvc();
/*
* app.UseMvc(config =>
* {
* config.MapRoute(
* name: "Default",
* template: "{controller}/{action}/{id?}",
* defaults: new { controller = "Home", action = "Index" }
* );
* });
*/
// app.Run(async (context) =>
// {
// await context.Response.WriteAsync("Hello World!");
// });
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
// No need to add these loggers in ASP.NET Core 2.0: the call to WebHost.CreateDefaultBuilder(args)
// in the Program class takes care of that.
//loggerFactory.AddConsole();
//loggerFactory.AddDebug();
//loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Models.CityDto, Entities.City>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointOfInterestForUpdateDto>();
});
app.UseCors(builder => builder.AllowAnyHeader().AllowAnyOrigin().AllowAnyMethod());
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception("Example exception");
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
#region NLog
//add NLog to .NET Core
loggerFactory.AddNLog();
////Enable ASP.NET Core features (NLog.web) - only needed for ASP.NET Core users
//app.AddNLogWeb();
//needed for non-NETSTANDARD platforms: configure nlog.config in your project root. NB: you need NLog.Web.AspNetCore package for this.
env.ConfigureNLog(Path.Combine(env.ContentRootPath, "nlog.config"));
#endregion
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <City, CityWithoutPointsOfInterestDto>();
cfg.CreateMap <City, CityDto>();
cfg.CreateMap <PointOfInterest, PointOfInterestDto>();
cfg.CreateMap <PointOfInterestDto, PointOfInterest>();
cfg.CreateMap <PointOfInterestForCreationDto, PointOfInterest>();
cfg.CreateMap <PointOfInterestForUpdateDto, PointOfInterest>();
cfg.CreateMap <PointOfInterest, PointOfInterestForUpdateDto>();
});
app.UseMvc();
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}
// This method gets called by the runtime. Use this method to configure the HTTP request pipeline.
public void Configure(IApplicationBuilder app, IHostingEnvironment env, ILoggerFactory loggerFactory,
CityInfoContext cityInfoContext)
{
loggerFactory.AddConsole();
loggerFactory.AddDebug();
// loggerFactory.AddProvider(new NLog.Extensions.Logging.NLogLoggerProvider());
// these third party logging library nicely integrate with asp.net core app.
loggerFactory.AddNLog();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage(); // middle ware added in development environment
}
else
{
app.UseExceptionHandler();
}
cityInfoContext.EnsureSeedDataForContext();// using extension to seed data(have to do that in ef core as it is known github issue).
app.UseStatusCodePages();
AutoMapper.Mapper.Initialize(cfg =>
{
cfg.CreateMap <Entities.City, Models.CityWithoutPointsOfInterestDto>();
cfg.CreateMap <Entities.City, Models.CityDto>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointsOfInterestDto>();
cfg.CreateMap <Models.PointOfInterestForCreationDto, Entities.PointOfInterest>();
cfg.CreateMap <Models.PointsOfInterestForUpdateDto, Entities.PointOfInterest>();
cfg.CreateMap <Entities.PointOfInterest, Models.PointsOfInterestForUpdateDto>();
});
// add mvc to http request pipeline AFTER exception
app.UseMvc();
//app.Run((context) =>
//{
// throw new Exception(("Example exception"));
//});
//app.Run(async (context) =>
//{
// await context.Response.WriteAsync("Hello World!");
//});
}