public void TestConnectorSerialization()
{
var obj = new TwoInOneOutExpression();
var tw = new StringWriter();
using (var xw = XmlWriter.Create(tw))
{
xw.WriteStartElement("Node");
obj.Serialize(xw);
xw.WriteEndElement();
}
var sr = new StringReader(tw.ToString());
using (var wr = XmlReader.Create(sr))
{
wr.ReadToFollowing("Node");
var result = new TwoInOneOutExpression();
result.Deserialize(wr);
Assert.AreEqual(obj.Id, result.Id);
Assert.AreEqual(obj.Connector1In.Id, result.Connector1In.Id);
Assert.AreEqual(obj.Connector2In.Id, result.Connector2In.Id);
Assert.AreEqual(obj.ConnectorOut.Id, result.ConnectorOut.Id);
}
}
public void CloneTest()
{
var source = new TwoInOneOutExpression
{
ExpressionName = "source",
FunctionName = "func",
Width = 1,
Height = 2,
Top = 3,
Left = 4,
Connector1In = {Name = "1"},
Connector2In = {Name = "2"},
ConnectorOut = {Name = "4"}
};
var cloneTo = (TwoInOneOutExpression)source.Clone();
Assert.AreEqual(source.ExpressionName, cloneTo.ExpressionName);
Assert.AreEqual(source.FunctionName, cloneTo.FunctionName);
Assert.AreEqual(source.Width, cloneTo.Width);
Assert.AreEqual(source.Height, cloneTo.Height);
Assert.AreEqual(source.Top, cloneTo.Top);
Assert.AreEqual(source.Left, cloneTo.Left);
Assert.AreNotEqual(source.Id, cloneTo.Id);
Assert.AreNotEqual(source.Connector1In.Id, cloneTo.Connector1In.Id);
Assert.AreNotEqual(source.Connector2In.Id, cloneTo.Connector2In.Id);
Assert.AreNotEqual(source.ConnectorOut.Id, cloneTo.ConnectorOut.Id);
Assert.AreEqual(source.Connector1In.Name, cloneTo.Connector1In.Name);
Assert.AreEqual(source.Connector2In.Name, cloneTo.Connector2In.Name);
Assert.AreEqual(source.ConnectorOut.Name, cloneTo.ConnectorOut.Name);
}
public void TestConnectorProperties()
{
var obj = new TwoInOneOutExpression();
TestsHelper.TestPublicPropertiesGetSet(obj);
Assert.IsNotNull(obj.Connector1In);
Assert.IsNotNull(obj.Connector2In);
Assert.IsNotNull(obj.ConnectorOut);
}
public void GetConnectorsTest()
{
var source = new TwoInOneOutExpression
{
Connector1In = {Name = "1"},
Connector2In = {Name = "2"},
ConnectorOut = {Name = "4"}
};
var conn = source.GetConnectors();
var connectors = conn as IList<IConnector> ?? conn.ToList();
Assert.IsTrue(connectors.Any(x => x.Name == "1"));
Assert.IsTrue(connectors.Any(x => x.Name == "2"));
Assert.IsTrue(connectors.Any(x => x.Name == "4"));
}
public void DoesInherit_IExpressionProcessor()
{
var stub = new TwoInOneOutExpression();
Assert.IsNotNull(stub as IExpressionProcessor);
}
public void IsValidTest()
{
var source = new TwoInOneOutExpression();
Assert.IsFalse(source.IsValid);
source.Connector1In.ConnectedTo = new ConnectorOut(null);
Assert.IsFalse(source.IsValid);
source.Connector2In.ConnectedTo = new ConnectorOut(null);
Assert.IsFalse(source.IsValid);
source.ConnectorOut.ConnectedTo = new ConnectorIn(null);
Assert.IsTrue(source.IsValid);
}
public void ValidationMessageTest()
{
var source = new TwoInOneOutExpression
{
Connector1In = {Name = "c1"},
Connector2In = {Name = "c2"},
ConnectorOut = {Name = "co"}
};
Assert.IsTrue(source.ValidationMessage.Contains("c1"));
Assert.IsTrue(source.ValidationMessage.Contains("c2"));
Assert.IsTrue(source.ValidationMessage.Contains("Result"));
source.Connector1In.ConnectedTo = new ConnectorOut(null);
Assert.IsFalse(source.ValidationMessage.Contains("c1"));
Assert.IsTrue(source.ValidationMessage.Contains("c2"));
Assert.IsTrue(source.ValidationMessage.Contains("Result"));
source.Connector2In.ConnectedTo = new ConnectorOut(null);
Assert.IsFalse(source.ValidationMessage.Contains("c1"));
Assert.IsFalse(source.ValidationMessage.Contains("c2"));
Assert.IsTrue(source.ValidationMessage.Contains("Result"));
source.ConnectorOut.ConnectedTo = new ConnectorIn(null);
Assert.IsTrue(string.IsNullOrEmpty(source.ValidationMessage));
}
/// <summary>
/// Copies members to clone.
/// </summary>
/// <param name="clone">
/// The clone.
/// </param>
protected void CopyMembers(TwoInOneOutExpression clone)
{
clone.ExpressionName = ExpressionName;
clone.FunctionName = FunctionName;
clone.Width = Width;
clone.Height = Height;
clone.Top = Top;
clone.Left = Left;
Connector1In.Clone(clone.Connector1In);
Connector2In.Clone(clone.Connector2In);
ConnectorOut.Clone(clone.ConnectorOut);
}
/// <summary>
/// Initializes a new instance of the <see cref="TwoInOneOutExpressionNode"/> class.
/// </summary>
/// <param name="diagramViewModel">The diagram view model.</param>
/// <param name="expressionObject">The expression object.</param>
/// <exception cref="System.ArgumentNullException">expressionObject</exception>
public TwoInOneOutExpressionNode(IDiagramViewModel diagramViewModel, TwoInOneOutExpression expressionObject)
: base(expressionObject)
{
if (expressionObject == null) throw new ArgumentNullException("expressionObject");
_diagramViewModel = diagramViewModel;
IsValidFunc = n => true;
UpdateAction = n => { };
SetConnector1In(new ExpressionConnectorViewModel(new ExpressionConnector(ConnectorType.In, expressionObject.Connector1In), _diagramViewModel));
SetConnector2In(new ExpressionConnectorViewModel(new ExpressionConnector(ConnectorType.In, expressionObject.Connector2In), _diagramViewModel));
ConnectorOut = new ExpressionConnectorViewModel(new ExpressionConnector(ConnectorType.Out, expressionObject.ConnectorOut), _diagramViewModel);
}
/// <summary>
/// Clones this instance.
/// </summary>
/// <returns>ExpressionObjectBase.</returns>
public override ExpressionObjectBase Clone()
{
var clone = new TwoInOneOutExpression(Type);
CopyMembers(clone);
return clone;
}
/// <summary>
/// Determines whether [is valid mapping] [the specified expression].
/// </summary>
/// <param name="expression">The expression.</param>
/// <param name="sourceContext">The source context.</param>
/// <returns><c>true</c> if [is valid mapping] [the specified expression]; otherwise, <c>false</c>.</returns>
private bool IsValidMapping(TwoInOneOutExpression expression, SourceField sourceContext)
{
if (expression.Type == ExpressionNodeType.Max || expression.Type == ExpressionNodeType.Min || expression.Type == ExpressionNodeType.Average
|| expression.Type == ExpressionNodeType.Sum)
{
SourceField newSourceContext = null;
if (expression.Connector1In != null && expression.Connector1In.Connection != null)
newSourceContext = GetSourceContext(expression.Connector1In.Connection.Source);
return expression.Connector1In != null && IsValidMapping(expression.Connector1In, sourceContext) && expression.Connector2In != null
&& IsValidMapping(expression.Connector2In, newSourceContext);
}
return expression.Connector1In != null && IsValidMapping(expression.Connector1In, sourceContext) &&
expression.Connector2In != null && IsValidMapping(expression.Connector2In, sourceContext);
}
private static void SetupExpressionsDiagram(DiagramViewModel vm)
{
vm.Palette.Add(new NodeGroup("String Functions",
new INodeViewModel[]
{
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.ToUpper)
{
ExpressionName = "Uppercase",
ConnectorIn = { DataType = NodeDataType.String, Name = "String" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.ToLower)
{
ExpressionName = "Lowercase",
ConnectorIn = { DataType = NodeDataType.String, Name = "String" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.Trim)
{
ExpressionName = "Trim",
ConnectorIn = { DataType = NodeDataType.String, Name = "String" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Concat)
{
ExpressionName = "Concat",
Connector1In = { DataType = NodeDataType.String, Name = "String 1" },
Connector2In = { DataType = NodeDataType.String, Name = "String 2" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Left)
{
ExpressionName = "Left",
Connector1In = { DataType = NodeDataType.String, Name = "String 1" },
Connector2In = { DataType = NodeDataType.String, Name = "String 2" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Right)
{
ExpressionName = "Right",
Connector1In = { DataType = NodeDataType.String, Name = "String 1" },
Connector2In = { DataType = NodeDataType.String, Name = "String 2" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
)
}));
vm.Palette.Add(new NodeGroup("Date Functions",
new INodeViewModel[]
{
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.AddDays)
{
ExpressionName = "Add Days",
Connector1In = { DataType = NodeDataType.DateTime, Name = "Date" },
Connector2In = { DataType = NodeDataType.Int, Name = "Days Count" },
ConnectorOut = { DataType = NodeDataType.DateTime, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.DateDiffDays)
{
ExpressionName = "DateDiff Days",
Connector1In = { DataType = NodeDataType.DateTime, Name = "Date 1" },
Connector2In = { DataType = NodeDataType.DateTime, Name = "Date 2" },
ConnectorOut = { DataType = NodeDataType.Int, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.DateDiffHours)
{
ExpressionName = "DateDiff Hours",
Connector1In = { DataType = NodeDataType.DateTime, Name = "Date 1" },
Connector2In = { DataType = NodeDataType.DateTime, Name = "Date 2" },
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result" }
}),
vm
),
new NodeViewModel<FunctionExpressionNode, ExpressionConnection>(
new FunctionExpressionNode(vm, new FunctionExpression(ExpressionNodeType.CustomFunction)
{
ExpressionName = "Current Date",
FunctionName = "DateTime.Now",
ConnectorOut = { DataType = NodeDataType.DateTime, Name = "Result" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.DateYear)
{
ExpressionName = "Date Year",
ConnectorIn = { DataType = NodeDataType.DateTime, Name = "Date" },
ConnectorOut = { DataType = NodeDataType.Int, Name = "Year" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.DateQuarter)
{
ExpressionName = "Date Quarter",
ConnectorIn = { DataType = NodeDataType.DateTime, Name = "Date" },
ConnectorOut = { DataType = NodeDataType.Int, Name = "Quarter" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.DateMonth)
{
ExpressionName = "Date Month",
ConnectorIn = { DataType = NodeDataType.DateTime, Name = "Date" },
ConnectorOut = { DataType = NodeDataType.Int, Name = "Month" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.DateMonthName)
{
ExpressionName = "Date Month Name",
ConnectorIn = { DataType = NodeDataType.DateTime, Name = "Date" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Month Name" }
}),
vm
),
new NodeViewModel<OneInOneOutExpressionNode, ExpressionConnection>(
new OneInOneOutExpressionNode(vm, new OneInOneOutExpression(ExpressionNodeType.DateWeek)
{
ExpressionName = "Date Week",
ConnectorIn = { DataType = NodeDataType.DateTime, Name = "Date" },
ConnectorOut = { DataType = NodeDataType.Int, Name = "Week" }
}),
vm
),
}));
vm.Palette.Add(new NodeGroup("Logical Functions",
new INodeViewModel[]
{
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.IsLess)
{
ExpressionName = "Less",
Connector1In = { DataType = NodeDataType.Double, Name = "a" },
Connector2In = { DataType = NodeDataType.Double, Name = "b" },
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.IsGreater)
{
ExpressionName = "Greater",
Connector1In = { DataType = NodeDataType.Double, Name = "a" },
Connector2In = { DataType = NodeDataType.Double, Name = "b" },
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.AreEqual)
{
ExpressionName = "Equals",
Connector1In = { DataType = NodeDataType.String, Name = "a" },
Connector2In = { DataType = NodeDataType.String, Name = "b" },
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result" }
}),
vm
),
new NodeViewModel<ThreeInOneOutExpressionNode, ExpressionConnection>(
new ThreeInOneOutExpressionNode(vm, new ThreeInOneOutExpression(ExpressionNodeType.If)
{
ExpressionName = "Condition",
Connector1In = { DataType = NodeDataType.Boolean, Name = "Condition" },
Connector2In = { DataType = NodeDataType.String, Name = "When True" },
Connector3In = { DataType = NodeDataType.String, Name = "When False" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
),
}));
vm.Palette.Add(new NodeGroup("Aggregate Functions",
new INodeViewModel[]
{
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Add)
{
ExpressionName = "Add",
Connector1In = { DataType = NodeDataType.Double, Name = "Value1"},
Connector2In = { DataType = NodeDataType.Double, Name = "Value2"},
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result"}
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Subtract)
{
ExpressionName = "Subtract",
Connector1In = { DataType = NodeDataType.Double, Name = "Value1" },
Connector2In = { DataType = NodeDataType.Double, Name = "Value2" },
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Multiply)
{
ExpressionName = "Multiply",
Connector1In = { DataType = NodeDataType.Double, Name = "Value1" },
Connector2In = { DataType = NodeDataType.Double, Name = "Value2" },
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.Divide)
{
ExpressionName = "Divide",
Connector1In = { DataType = NodeDataType.Double, Name = "Value1" },
Connector2In = { DataType = NodeDataType.Double, Name = "Value2" },
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result" }
}),
vm
),
new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(
new TwoInOneOutExpressionNode(vm, new TwoInOneOutExpression(ExpressionNodeType.CustomFunction)
{
ExpressionName = "Custom Multiply",
FunctionName = "?1 * ?2",
Connector1In = { DataType = NodeDataType.Double, Name = "Value1" },
Connector2In = { DataType = NodeDataType.Double, Name = "Value2" },
ConnectorOut = { DataType = NodeDataType.Double, Name = "Result" }
}),
vm
),
}));
vm.Palette.Add(new NodeGroup("SPC Functions",
new INodeViewModel[]
{
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.AboveCenterLine)
{
ExpressionName = "Above Center Line",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.BelowCenterLine)
{
ExpressionName = "Below Center Line",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.GoingDown)
{
ExpressionName = "Going Down",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.GoingUp)
{
ExpressionName = "Going Up",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.AlternatingUpAndDown)
{
ExpressionName = "Alternating Up and Down",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<SixInOneOutExpressionNode, ExpressionConnection>(
new SixInOneOutExpressionNode(vm, new SixInOneOutExpression(ExpressionNodeType.LessThanLowerLimits)
{
ExpressionName = "Less Than LCL/LSL",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Double, Name = "LCL/LSL"},
Connector4In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector5In = { DataType = NodeDataType.Int, Name = "Y Number"},
Connector6In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<SixInOneOutExpressionNode, ExpressionConnection>(
new SixInOneOutExpressionNode(vm, new SixInOneOutExpression(ExpressionNodeType.GreaterThanUpperLimits)
{
ExpressionName = "Greater Than UCL/USL",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Double, Name = "UCL/USL"},
Connector4In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector5In = { DataType = NodeDataType.Int, Name = "Y Number"},
Connector6In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.Same)
{
ExpressionName = "Same",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<SixInOneOutExpressionNode, ExpressionConnection>(
new SixInOneOutExpressionNode(vm, new SixInOneOutExpression(ExpressionNodeType.Between)
{
ExpressionName = "Between",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.Double, Name = "Low Value"},
Connector5In = { DataType = NodeDataType.Double, Name = "High Value"},
Connector6In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FiveInOneOutExpressionNode, ExpressionConnection>(
new FiveInOneOutExpressionNode(vm, new FiveInOneOutExpression(ExpressionNodeType.ZoneAorBeyond)
{
ExpressionName = "Zone A or beyond",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.Int, Name = "Y Number"},
Connector5In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FiveInOneOutExpressionNode, ExpressionConnection>(
new FiveInOneOutExpressionNode(vm, new FiveInOneOutExpression(ExpressionNodeType.ZoneBorBeyond)
{
ExpressionName = "Zone B or beyond",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.Int, Name = "Y Number"},
Connector5In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FiveInOneOutExpressionNode, ExpressionConnection>(
new FiveInOneOutExpressionNode(vm, new FiveInOneOutExpression(ExpressionNodeType.ZoneCorBeyond)
{
ExpressionName = "Zone C or beyond",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Sub-group Size"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.Int, Name = "Y Number"},
Connector5In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.FailedNumber)
{
ExpressionName = "Failed Number (attribute)",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Number of samples"},
Connector3In = { DataType = NodeDataType.Int, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
new NodeViewModel<FourInOneOutExpressionNode, ExpressionConnection>(
new FourInOneOutExpressionNode(vm, new FourInOneOutExpression(ExpressionNodeType.FailedPercent)
{
ExpressionName = "Failed Percent (attribute)",
Connector1In = { DataType = NodeDataType.SPCChart, Name = "SPC Field"},
Connector2In = { DataType = NodeDataType.Int, Name = "Number of samples"},
Connector3In = { DataType = NodeDataType.Double, Name = "X Number"},
Connector4In = { DataType = NodeDataType.ChartType, Name = "Chart Type"},
ConnectorOut = { DataType = NodeDataType.Boolean, Name = "Result"}
}),
vm
),
}));
vm.Palette.Add(new NodeGroup("Constants",
new INodeViewModel[]
{
new NodeViewModel<ConstantExpressionNode, ExpressionConnection>(
new ConstantExpressionNode(vm, new ConstantExpression()
{
ExpressionName = "Constant",
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
}),
vm
)
}));
var uis = new SourceFieldList {ExpressionName = "Current User Information", Left = 10, Top = 400};
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.String, Name = "User Name", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserName", ConnectorOut = { DataType = NodeDataType.String, Name = "User Name" } });
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.String, Name = "Full Name", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserFullName", ConnectorOut = { DataType = NodeDataType.String, Name = "Full Name" } });
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.Int, Name = "Person ID", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserPersonId", ConnectorOut = { DataType = NodeDataType.String, Name = "Person ID" } });
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.String, Name = "Email Address", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserEmailAddress", ConnectorOut = { DataType = NodeDataType.String, Name = "Email Address" } });
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.String, Name = "Last Name", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserLastName", ConnectorOut = { DataType = NodeDataType.String, Name = "Last Name" } });
uis.Fields.Add(new SourceField(null) { DataType = NodeDataType.String, Name = "Business Unit", SetName = SourceFieldSetNames.CurrentUserInfo, SystemName = "Utils.CurrentUserBusinessUnitId", ConnectorOut = { DataType = NodeDataType.String, Name = "Business Unit" } });
// source
//var fieldList = new Dictionary<string, object>();
//fieldList["Name"] = "Name";
//fieldList["Title"] = "Title";
//fieldList["PublishDate"] = DateTime.Now;
//fieldList["Author"] = "Author";
var sourceNodeList = new SourceFieldList();
//Func<IExpressionField, ICollection<IExpressionField>> sfRetriever = f => GetCRFields(f, sourceNodeList);
sourceNodeList.ExpressionName = "Album";
sourceNodeList.Top = 10;
sourceNodeList.Left = 10;
sourceNodeList.Fields.Add(new SourceField(sourceNodeList) { DataType = NodeDataType.String, Name = "Name", SetName = SourceFieldSetNames.Item, SystemName = "Name", ConnectorOut = { DataType = NodeDataType.String, Name = "Name" } });
sourceNodeList.Fields.Add(new SourceField(sourceNodeList) { DataType = NodeDataType.String, Name = "Title", SetName = SourceFieldSetNames.Item, SystemName = "Title", ConnectorOut = { DataType = NodeDataType.String, Name = "Title" } });
sourceNodeList.Fields.Add(new SourceField(sourceNodeList) { DataType = NodeDataType.String, Name = "PublishDate", SetName = SourceFieldSetNames.Item, SystemName = "PublishDate", ConnectorOut = { DataType = NodeDataType.String, Name = "PublishDate" } });
sourceNodeList.Fields.Add(new SourceField(sourceNodeList)
{
DataType = NodeDataType.String,
Name = "Author",
SetName = SourceFieldSetNames.Item,
SystemName = "Author",
ConnectorOut = { DataType = NodeDataType.String, Name = "Author" },
SubfieldsRetriever = new CRSubfieldsRetriever()
});
//var sourceNodes = SourceNodeFactory.ConvertToSource("Album", fieldList, SourceFieldSetNames.Item);
//sourceNodes.Top = 10;
//sourceNodes.Left = 10;
//sourceNodes.Width = 200;
// destination
var destinationNodes = DestinationNodeFactory.ConvertToSource(typeof(ExpressionResult));
destinationNodes.Top = 200;
destinationNodes.Left = 600 ;
var expressions = new List<IExpressionObjectBase>();
expressions.Add(sourceNodeList);
//expressions.Add(uis);
expressions.Add(destinationNodes);
// connection
var connection = new Connection
{
Id = Guid.NewGuid(),
Source = new ConnectorOut(null) { Id = sourceNodeList.ConnectorsOut[0].Id },
Sink = new ConnectorIn(null) { Id = destinationNodes.ConnectorsIn[0].Id }
};
//expressions.Add(connection);
// constant
var constantExpr = new ConstantExpression { ExpressionName = "Constant", Top = 10, Left = 250, Value = 10,
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
};
//expressions.Add(constantExpr);
// oneinoneout
var oneinoneoutExpr = new OneInOneOutExpression(ExpressionNodeType.ToUpper)
{ ExpressionName = "Uppercase", Top = 60, Left = 250,
ConnectorIn = {DataType = NodeDataType.String, Name = "String"},
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
};
//expressions.Add(oneinoneoutExpr);
// twoinoneout
var twoinoneoutExpr = new TwoInOneOutExpression(ExpressionNodeType.Concat)
{
ExpressionName = "Concat",
Top = 110,
Left = 250,
Connector1In = { DataType = NodeDataType.String, Name = "String" },
Connector2In = { DataType = NodeDataType.String, Name = "String" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
};
//expressions.Add(twoinoneoutExpr);
// threeinoneout
var threeinoneoutExpr = new ThreeInOneOutExpression(ExpressionNodeType.If)
{
ExpressionName = "Condition",
Top = 180,
Left = 250,
Connector1In = { DataType = NodeDataType.Boolean, Name = "Condition" },
Connector2In = { DataType = NodeDataType.String, Name = "If True" },
Connector3In = { DataType = NodeDataType.String, Name = "If False" },
ConnectorOut = { DataType = NodeDataType.String, Name = "Result" }
};
expressions.Add(threeinoneoutExpr);
// function
var functionExpr = new FunctionExpression(ExpressionNodeType.CustomFunction) { ExpressionName = "Current Date", Top = 280, Left = 250, Width = 100, Height = 45, FunctionName = "DateTime.Now",
ConnectorOut = {DataType = NodeDataType.DateTime, Name="Result"}};
//expressions.Add(functionExpr);
ExpressionTranslator.TranslateToDiagram(expressions, vm);
}
private void ToExpressionNodeTwoInOneOutFunctionTest(ExpressionNodeType nodeType, Type functionNode)
{
var obj = new ExpressionNodeFactory();
var connection1 = new Connection();
connection1.Source = new ConnectorOut(connection1);
connection1.Sink = new ConnectorIn(connection1);
var connection2 = new Connection();
connection2.Source = new ConnectorOut(connection2);
connection2.Sink = new ConnectorIn(connection2);
var connection3 = new Connection();
connection3.Source = new ConnectorOut(connection3);
connection3.Sink = new ConnectorIn(connection3);
var destination = new DestinationFieldList { UniqueName = "Destination" };
destination.Fields.Add(new DestinationField(destination));
var source = new SourceFieldList();
source.Fields.Add(new SourceField(source) { Name = "Field" });
source.Fields.Add(new SourceField(source) { Name = "Field" });
var func = new TwoInOneOutExpression(nodeType) { UniqueName = "Function" };
func.Connector1In.Id = connection1.Sink.Id;
func.Connector2In.Id = connection2.Sink.Id;
source.Fields[0].ConnectorOut.Id = connection1.Source.Id;
source.Fields[1].ConnectorOut.Id = connection2.Source.Id;
destination.Fields[0].ConnectorIn.Id = connection3.Sink.Id;
func.ConnectorOut.Id = connection3.Source.Id;
var objects = new List<IExpressionObjectBase>
{
source,
destination,
func,
connection1,
connection2,
connection3
};
var destNode = obj.CreateExpressionNodes(objects);
Assert.AreEqual(functionNode, destNode.ResultNodes.FirstOrDefault().Expression.GetType());
}
/// <summary>
/// Adds the field node.
/// </summary>
/// <param name="item">The item.</param>
/// <param name="diagramViewModel">The diagram view model.</param>
private static void AddFieldNode(TwoInOneOutExpression item, IDiagramViewModel diagramViewModel)
{
var node = new TwoInOneOutExpressionNode(diagramViewModel, item);
diagramViewModel.Items.Add(new NodeViewModel<TwoInOneOutExpressionNode, ExpressionConnection>(node, diagramViewModel));
}