Ejemplo n.º 1
0
        private void ProcedureTable_CellDoubleClick(object sender, DataGridViewCellEventArgs e)
        {
            CurrencyManager cm = (CurrencyManager)this.BindingContext[ProcedureTable.DataSource];
            Procedure_Table p = new Procedure_Table();

            switch (Camera.Procedure[cm.Position].ProcedureMethod)
            {
                case (int)procedure_M.readimage:

                    //載入圖片函式
                    AccessImage readthefuckingimage = new AccessImage();
                    //由檔案載入圖片
                    readthefuckingimage.ImagefromFile();
                    //設定顯示視窗
                    //readthefuckingimage.setwindow(MainWindow.HalconWindow);


                    if (readthefuckingimage.getimagebase().GetImage != null)
                    {
                        p.procedurefunction.doprocedurefunction += readthefuckingimage.show;
                        Camera.Object[cm.Position].Image = readthefuckingimage.getimagebase().GetImage;
                        Camera.Procedure[cm.Position].Setornot = true;
                    }
                    break;

                case (int)procedure_M.Measure_1D:

                    Measure_1D M1_temp = (Measure_1D)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M1_temp.MeasureImage = Camera.Object[cm.Position - 1].Image;           //暫時使用前一個程序的圖片(載入圖片)
                        M1_temp.O_T = Camera.Object;
                    }

                    M1_temp.ShowDialog();
                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M1_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M1_temp;
                    Camera.Procedure[cm.Position].Setornot = M1_temp.setornot;

                    break;

                case (int)procedure_M.Measure_2D_Circle:

                    Measure_2D_Circle M2DC_temp = (Measure_2D_Circle)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M2DC_temp.MeasureImage = Camera.Object[cm.Position - 1].Image;           //暫時使用前一個程序的圖片(載入圖片)

                    }

                    M2DC_temp.ShowDialog();
                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M2DC_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M2DC_temp;
                    Camera.Procedure[cm.Position].Setornot = M2DC_temp.setornot;

                    break;

                case (int)procedure_M.Measure_2D_Ellipse:

                    Measure_2D_Ellipse M2DE_temp = (Measure_2D_Ellipse)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M2DE_temp.MeasureImage = Camera.Object[cm.Position - 1].Image;           //暫時使用前一個程序的圖片(載入圖片)
                    }
                    M2DE_temp.ShowDialog();
                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M2DE_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M2DE_temp;
                    Camera.Procedure[cm.Position].Setornot = M2DE_temp.setornot;
                    break;

                case (int)procedure_M.Measure_2D_Line:

                    Measure_2D_Line M2DL_temp = (Measure_2D_Line)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M2DL_temp.MeasureImage = Camera.Object[cm.Position - 1].Image;           //暫時使用前一個程序的圖片(載入圖片)

                    }

                    M2DL_temp.ShowDialog();
                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M2DL_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M2DL_temp;
                    Camera.Procedure[cm.Position].Setornot = M2DL_temp.setornot;

                    break;

                case (int)procedure_M.CreateMatchingModel:

                    CreateMatchingModel CMM_temp = (CreateMatchingModel)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        CMM_temp.TemplateImage = Camera.Object[cm.Position - 1].Image;
                    }
                    CMM_temp.ShowDialog();

                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += CMM_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = CMM_temp;
                    Camera.Procedure[cm.Position].Setornot = CMM_temp.setornot;

                    break;
            }
            setProcedurecolor();


        }
Ejemplo n.º 2
0
        private void ProcedureTable_CellDoubleClick(object sender, DataGridViewCellEventArgs e)
        {
            CurrencyManager cm = (CurrencyManager)this.BindingContext[ProcedureTable.DataSource];
            Procedure_Table p = new Procedure_Table();
            //載入圖片函式
            

            switch (Camera.Procedure[cm.Position].ProcedureMethod)
            {
                case (int)PROCEDURE.readimage:
                    
                    AccessImage readthefuckingimage = new AccessImage();
                    //由檔案載入圖片
                    readthefuckingimage.ImagefromFile();
                    
                    if (readthefuckingimage.getimagebase().GetImage != null)
                    {
                        p.procedurefunction.doprocedurefunction += readthefuckingimage.show;
                        string temp = "(procedure_" + cm.Position + ",Image_" + Camera.Object[cm.Position].OImage.Count + ")";

                        if (readthefuckingimage.getimagebase().GetImage != null)
                        {
                            Camera.Object[cm.Position].OImage.Clear();
                            Camera.Object[cm.Position].OImageName.Clear();
                        }


                        Camera.Object[cm.Position].OImage.Add(readthefuckingimage.getimagebase().GetImage);
                        Camera.Object[cm.Position].OImageName.Add(temp);
                        Camera.Procedure[cm.Position].Setornot = true;
                    }
                    break;
                case (int)PROCEDURE.ImageFromCamera:

                    ImageFromCamera IFC_temp = (ImageFromCamera)Camera.Procedure[cm.Position].SettingForm;

                    IFC_temp.ShowDialog();

                    if (IFC_temp.setornot == true)
                    {                       
                        if (IFC_temp.dstImage != null)
                        {
                            Camera.Object[cm.Position].OImage.Clear();
                            Camera.Object[cm.Position].OImageName.Clear();
                        }
                        Camera.Object[cm.Position].OImage.Add(IFC_temp.dstImage);
                        Camera.Object[cm.Position].OImageName.Add("(procedure_" + cm.Position + ",Image_" + Camera.Object[cm.Position].OImage.Count + ")");
                    }

                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += IFC_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = IFC_temp;
                    Camera.Procedure[cm.Position].Setornot = IFC_temp.setornot;
                    break;

                case (int)PROCEDURE.Measure_1D:

                    Measure_1D M1_temp = (Measure_1D)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M1_temp.M1DP_in.O_T = Camera.Object;
                    }
                    M1_temp.ShowDialog();

                    if (M1_temp.M1DP_form.setornot == true)
                    {
                        Camera.Object[cm.Position].OPoint.Clear();
                        Camera.Object[cm.Position].OPointName.Clear();
                        if (M1_temp.M1DP_out.dstfirstpoint != null)
                        {
                            for (int i = 0; i < M1_temp.M1DP_out.dstfirstpoint.Count; i++)
                            {
                                Camera.Object[cm.Position].OPoint.Add(M1_temp.M1DP_out.dstfirstpoint[i]);
                                Camera.Object[cm.Position].OPointName.Add("dstfirstpoint" + i);
                            }
                        }
                        if (M1_temp.M1DP_out.dstsecondpoint != null)
                        {
                            for (int i = 0; i < M1_temp.M1DP_out.dstsecondpoint.Count; i++)
                            {
                                Camera.Object[cm.Position].OPoint.Add(M1_temp.M1DP_out.dstsecondpoint[i]);
                                Camera.Object[cm.Position].OPointName.Add("dstsecondpoint" + i);
                            }
                        }
                    }
                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M1_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M1_temp;
                    Camera.Procedure[cm.Position].Setornot = M1_temp.M1DP_form.setornot;

                    break;

                case (int)PROCEDURE.Measure_2D_Circle:

                    Measure_2D_Circle M2DC_temp = (Measure_2D_Circle)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        M2DC_temp.M2DCP_in.O_T = Camera.Object;          //暫時使用前一個程序的圖片(載入圖片)
                    }
                    M2DC_temp.ShowDialog();

                    if (M2DC_temp.M2DCP_out.setornot == true)
                    {
                        Camera.Object[cm.Position].OCircle.Clear();
                        Camera.Object[cm.Position].OCircleName.Clear();
                        if (M2DC_temp.M2DCP_out.dst_circle != null)
                        {
                            Camera.Object[cm.Position].OCircle.Add(M2DC_temp.M2DCP_out.dst_circle);
                            Camera.Object[cm.Position].OCircleName.Add("testcircle");
                        }
                    }


                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M2DC_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M2DC_temp;
                    Camera.Procedure[cm.Position].Setornot = M2DC_temp.M2DCP_out.setornot;

                    break;

                case (int)PROCEDURE.Measure_2D_Line:

                    Measure_2D_Line M2DL_temp = (Measure_2D_Line)Camera.Procedure[cm.Position].SettingForm;
                    
                    if (cm.Position != 0)
                    {
                        M2DL_temp.M2DLP_in.O_T = Camera.Object;          //暫時使用前一個程序的圖片(載入圖片)
                    }
                    M2DL_temp.ShowDialog();

                    if (M2DL_temp.M2DLP_out.setornot == true)
                    {
                        Camera.Object[cm.Position].OLine.Clear();
                        Camera.Object[cm.Position].OLineName.Clear();
                        if (M2DL_temp.M2DLP_out.dst_line != null)
                        {
                            Camera.Object[cm.Position].OLine.Add(M2DL_temp.M2DLP_out.dst_line);
                            Camera.Object[cm.Position].OLineName.Add("TheVerticalLine");
                        }
                    }


                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += M2DL_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = M2DL_temp;
                    Camera.Procedure[cm.Position].Setornot = M2DL_temp.M2DLP_out.setornot;

                    break;
                    

                case (int)PROCEDURE.CreateMatchingModel:

                    CreateMatchingModel CMM_temp = (CreateMatchingModel)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        CMM_temp.CMMP_in.O_T = Camera.Object;
                    }
                    CMM_temp.ShowDialog();

                    if (CMM_temp.CMMP_out.setornot ==true)
                    {
                        Camera.Object[cm.Position].OImage.Clear();
                        Camera.Object[cm.Position].OImageName.Clear();
                        if (CMM_temp.CMMP_out.dst_Image.GetImage != null)
                        {
                            Camera.Object[cm.Position].OImage.Add(CMM_temp.CMMP_out.dst_Image.GetImage);
                            Camera.Object[cm.Position].OImageName.Add("CreateMatchingModel");
                        }
                    }

                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += CMM_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = CMM_temp;
                    Camera.Procedure[cm.Position].Setornot = CMM_temp.CMMP_out.setornot;
                                        
                    break;
                case (int)PROCEDURE.TheVerticalLine:

                    TheVerticalLine TVL_temp = (TheVerticalLine)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        TVL_temp.TVL_in.O_T = Camera.Object;
                    }
                    TVL_temp.ShowDialog();

                    if (TVL_temp.TVL_out.setornot == true)
                    {
                        Camera.Object[cm.Position].OLine.Clear();
                        Camera.Object[cm.Position].OLineName.Clear();
                        if (TVL_temp.TVL_out.dst_Line != null)
                        {
                            Camera.Object[cm.Position].OLine.Add(TVL_temp.TVL_out.dst_Line);
                            Camera.Object[cm.Position].OLineName.Add("TheVerticalLine");
                        }
                    }



                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += TVL_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = TVL_temp;
                    Camera.Procedure[cm.Position].Setornot = TVL_temp.TVL_out.setornot;

                    break; 


                case (int)PROCEDURE.PL_distance:

                    PL_distance PLD_temp = (PL_distance)Camera.Procedure[cm.Position].SettingForm;
                    if (cm.Position != 0)
                    {
                        PLD_temp.O_T = Camera.Object;
                    }
                    PLD_temp.ShowDialog();


                    Camera.Procedure[cm.Position].procedurefunction.doprocedurefunction += PLD_temp.run;
                    Camera.Procedure[cm.Position].SettingForm = PLD_temp;
                    Camera.Procedure[cm.Position].Setornot = PLD_temp.setornot;

                    break;


            }
            setProcedurecolor();


        }