//Chamber생성
internal static void InitializeParallelChamber(AoEquipment aeqp)
{
var eqp = aeqp.ToFabAoEquipment();
if (eqp.IsParallelChamber == false)
{
return;
}
FabEqp taretEqp = aeqp.Target as FabEqp;
AoChamberProc2 proc = eqp.FirstProcess <AoChamberProc2>();
var chambers = proc.Chambers;
if (chambers != null)
{
int count = chambers.Length;
eqp.SubEqps = new FabSubEqp[count];
for (int i = 0; i < count; i++)
{
var chamberInfo = chambers[i];
string subEqpID = chamberInfo.Label;
var subEqp = taretEqp.GetSubEqp(subEqpID) as FabSubEqp;
subEqp.ChamberInfo = chamberInfo;
eqp.SubEqps[i] = subEqp;
subEqp.LastPlan = SimHelper.CreateInitLastPlan(subEqp.StatusInfo);
subEqp.LastIdleRunStartTime = aeqp.NowDT;
subEqp.LastIdleStartTime = aeqp.NowDT;
}
}
}
public static bool IsFilterPreventLayerChange(AoEquipment aeqp, FabLot lot)
{
var eqp = aeqp.ToFabAoEquipment();
//if (eqp.EqpID == "THCVDC00" && eqp.NowDT >= LcdHelper.StringToDateTime("20200108 090229"))
// Console.WriteLine("B");
WeightFactor wf = WeightHelper.GetWeightFactor(eqp.Target.Preset, Constants.WF_PREVENT_LAYER_CHANGE_FILTER);
if (wf == null || wf.Factor == 0)
{
return(false);
}
var step = lot.CurrentFabStep;
if (IsLastRunStep(eqp, step))
{
return(false);
}
var stepList = SimHelper.GetDspEqpSteps(eqp.DspEqpGroupID);
if (stepList == null || stepList.Count <= 1)
{
return(false);
}
var last = eqp.GetLastPlan();
if (last == null)
{
return(false);
}
bool isFilter = ExistRunEqpByDspEqpGroup(eqp, last.FabStep) == false;
//if (isFilter)
// info.FilterReason = string.Format("");
return(isFilter);
}
public LayerStats(FabAoEquipment eqp)
{
var factor = WeightHelper.GetWeightFactor(eqp.Target.Preset, Constants.WF_LAYER_BALANCE_PRIORITY);
if (factor == null)
{
return;
}
string dspEqpGroupID = eqp.DspEqpGroupID;
List <FabStdStep> steps = SimHelper.GetDspEqpSteps(dspEqpGroupID);
for (int i = 0; i < steps.Count; i++)
{
FabStdStep step = steps[i];
int qty = InFlowMaster.GetStepWipQtyforLayerBalance(step.BalanceSteps);
StepWipStat stat;
if (dic.TryGetValue(step.StepID, out stat) == false)
{
stat = new StepWipStat(this, step);
dic.Add(step.StepID, stat);
}
stat.AddQty(qty);
}
this.MinQty = decimal.MaxValue;
this.MaxQty = decimal.MinValue;
foreach (StepWipStat stat in dic.Values)
{
this.MinQty = Math.Min(stat.GapQty, this.MinQty);
this.MaxQty = Math.Max(stat.GapQty, this.MaxQty);
}
}
private static bool UpdateLastLoadInfo(this FabSubEqp subEqp, DateTime now, LoadingStates state, FabAoEquipment eqp, bool isDone)
{
var lastInfo = subEqp.LastLoadInfo;
if (lastInfo == null)
{
return(false);
}
if (SimHelper.IgnoreStateChange(eqp, state, isDone))
{
return(true);
}
lastInfo.EndTime = now;
var lastPlan = lastInfo.Target as FabPlanInfo;
if (lastPlan != null)
{
lastPlan.EqpInEndTime = now;
}
var infos = subEqp.LoadInfos;
if (lastInfo.IsDummyState())
{
infos.Remove(lastInfo);
}
//TODO : 임시처리 BUSY 중복 제외
if (lastInfo.IsDummyState_Busy())
{
infos.Remove(lastInfo);
}
return(false);
}
public static void SetInitEqpStatus(this FabEqp targetEqp, FabAoEquipment eqp)
{
EqpStatusInfo info = targetEqp.StatusInfo;
if (info == null)
{
return;
}
eqp.ContinuousQty = info.LastContinuousQty;
//down 이후 setup 필요 (2020.01.14 - by.liujian(유건))
//if (targetEqp.State == ResourceState.Down && info.OrigineStatus != MesEqpStatus.IDLE)
// return;
var status = info.MesStatus;
if (status == MesEqpStatus.RUN || status == MesEqpStatus.Set_Up ||
status == MesEqpStatus.E_RUN || info.OrigineStatus == MesEqpStatus.IDLE ||
info.OrigineStatus == MesEqpStatus.DOWN)
{
eqp.LastPlan = SimHelper.CreateInitLastPlan(info);
}
}
private static bool IsFilterSetup(this JobFilterInfo info, AoEquipment aeqp)
{
WeightFactor wf = WeightHelper.GetWeightFactor(aeqp.Target.Preset, Constants.WF_SETUP_FILTERING);
if (wf == null || wf.Factor == 0)
{
return(false);
}
FabLot lot = info.Sample;
if (lot == null)
{
return(false);
}
FabAoEquipment eqp = aeqp.ToFabAoEquipment();
var step = info.Step;
//if (eqp.EqpID == "CHPIL300" && eqp.NowDT >= LcdHelper.StringToDateTime("20200119 105032")
// && lot.CurrentProductID == "CW42512AB000")
// Console.WriteLine("B");
if (eqp.IsLastPlan(lot))
{
return(false);
}
double setupTime = info.SetupTime;
if (setupTime <= 0)
{
return(false);
}
double ratio = Convert.ToDouble(wf.Criteria[0]);
double continuousQty = info.WaitSum;
if (continuousQty > 0)
{
continuousQty += InFlowMaster.GetContinuousQty(lot, step);
}
if (eqp.IsParallelChamber)
{
continuousQty = continuousQty / eqp.GetChamberCapacity();
}
var st = step.GetStepTime(aeqp.EqpID, info.ProductID);
if (st == null)
{
return(false);
}
double tactTime = st.TactTime;
double workSec = Math.Round(continuousQty * tactTime, 2);
double setupSec = Math.Round(setupTime * 60 * ratio, 2);
bool isFilter = workSec < setupSec;
if (isFilter == false)
{
return(false);
}
//단순 Setup > Tact Time 일 경우 Inflow를 고려
//다른 곳에서 진행중인가? Yes : 필터, No: 소량검사
if (SimHelper.IsAnyWorking(eqp, lot) == false)
{
//기다려도 오지 않는 작은 Lot인가? Yes : 필터하지 않음. No : 필터
if (IsWaitSmallSizeLot(aeqp, info, lot, continuousQty, setupTime, ratio, st))
{
isFilter = false;
}
}
if (isFilter)
{
info.FilterReason = string.Format("SetupTime：{0} > {1}(Qty：{2} * Tact：{3})", setupSec, workSec, continuousQty, st.TactTime);
}
return(isFilter);
}
