protected Joint(JointDef def)
{
_type = def.type;
_bodyA = def.body1;
_bodyB = def.body2;
_collideConnected = def.collideConnected;
_userData = def.userData;
_edgeA = new JointEdge();
_edgeB = new JointEdge();
}
// This is used to prevent connected bodies from colliding.
// It may lie, depending on the collideConnected flag.
internal bool IsConnected(Body other)
{
for (JointEdge jn = _jointList; jn != null; jn = jn.Next)
{
if (jn.Other == other)
{
return(jn.Joint._collideConnected == false);
}
}
return(false);
}
void SolveTOI(ref TimeStep step)
{
// Reserve an island and a queue for TOI island solution.
_island.Reset(_bodyCount,
Settings.b2_maxTOIContactsPerIsland,
Settings.b2_maxTOIJointsPerIsland,
_contactManager.ContactListener);
//Simple one pass queue
//Relies on the fact that we're only making one pass
//through and each body can only be pushed/popped once.
//To push:
// queue[queueStart+queueSize++] = newElement;
//To pop:
// poppedElement = queue[queueStart++];
// --queueSize;
//#warning More Body array Allocs
int queueCapacity = _bodyCount;
Body[] queue = new Body[_bodyCount];
for (Body b = _bodyList; b != null; b = b._next)
{
b._flags &= ~BodyFlags.Island;
b._sweep.t0 = 0.0f;
}
for (Contact c = _contactManager._contactList; c != null; c = c._next)
{
// Invalidate TOI
c._flags &= ~(ContactFlags.Toi | ContactFlags.Island);
}
for (Joint j = _jointList; j != null; j = j._next)
{
j._islandFlag = false;
}
// Find TOI events and solve them.
for (;;)
{
// Find the first TOI.
Contact minContact = null;
float minTOI = 1.0f;
for (Contact c = _contactManager._contactList; c != null; c = c._next)
{
if ((c._flags & (ContactFlags.Slow | ContactFlags.NonSolid)) != ContactFlags.None)
{
continue;
}
// TODO_ERIN keep a counter on the contact, only respond to M TOIs per contact.
float toi = 1.0f;
if ((c._flags & ContactFlags.Toi) != ContactFlags.None)
{
// This contact has a valid cached TOI.
toi = c._toi;
}
else
{
// Compute the TOI for this contact.
Fixture s1 = c.GetFixtureA();
Fixture s2 = c.GetFixtureB();
Body b1 = s1.GetBody();
Body b2 = s2.GetBody();
if ((b1.IsStatic || b1.IsSleeping) && (b2.IsStatic || b2.IsSleeping))
{
continue;
}
// Put the sweeps onto the same time interval.
float t0 = b1._sweep.t0;
if (b1._sweep.t0 < b2._sweep.t0)
{
t0 = b2._sweep.t0;
b1._sweep.Advance(t0);
}
else if (b2._sweep.t0 < b1._sweep.t0)
{
t0 = b1._sweep.t0;
b2._sweep.Advance(t0);
}
Debug.Assert(t0 < 1.0f);
// Compute the time of impact.
toi = c.ComputeTOI(ref b1._sweep, ref b2._sweep);
//CalculateTimeOfImpact(c._fixtureA.GetShape(), b1._sweep, c._fixtureB.GetShape(), b2._sweep);
Debug.Assert(0.0f <= toi && toi <= 1.0f);
// If the TOI is in range ...
if (0.0f < toi && toi < 1.0f)
{
// Interpolate on the actual range.
toi = Math.Min((1.0f - toi) * t0 + toi, 1.0f);
}
c._toi = toi;
c._flags |= ContactFlags.Toi;
}
if (Settings.b2_FLT_EPSILON < toi && toi < minTOI)
{
// This is the minimum TOI found so far.
minContact = c;
minTOI = toi;
}
}
if (minContact == null || 1.0f - 100.0f * Settings.b2_FLT_EPSILON < minTOI)
{
// No more TOI events. Done!
break;
}
// Advance the bodies to the TOI.
Fixture s1_2 = minContact.GetFixtureA();
Fixture s2_2 = minContact.GetFixtureB();
Body b1_2 = s1_2.GetBody();
Body b2_2 = s2_2.GetBody();
b1_2.Advance(minTOI);
b2_2.Advance(minTOI);
// The TOI contact likely has some new contact points.
minContact.Update(_contactManager.ContactListener);
minContact._flags &= ~ContactFlags.Toi;
if ((minContact._flags & ContactFlags.Touch) == 0)
{
// This shouldn't happen. Numerical error?
//Debug.Assert(false);
continue;
}
// Build the TOI island. We need a dynamic seed.
Body seed = b1_2;
if (seed.IsStatic)
{
seed = b2_2;
}
// Reset island and queue.
_island.Clear();
int queueStart = 0; // starting index for queue
int queueSize = 0; // elements in queue
queue[queueStart + queueSize++] = seed;
seed._flags |= BodyFlags.Island;
// Perform a breadth first search (BFS) on the contact/joint graph.
while (queueSize > 0)
{
// Grab the next body off the stack and add it to the island.
Body b = queue[queueStart++];
--queueSize;
_island.Add(b);
// Make sure the body is awake.
b._flags &= ~BodyFlags.Sleep;
// To keep islands as small as possible, we don't
// propagate islands across static bodies.
if (b.IsStatic)
{
continue;
}
// Search all contacts connected to this body.
for (ContactEdge cEdge = b._contactList; cEdge != null; cEdge = cEdge.Next)
{
// Does the TOI island still have space for contacts?
if (_island._contacts.Count == _island._contactCapacity)
{
continue;
}
// Has this contact already been added to an island? Skip slow or non-solid contacts.
if ((cEdge.Contact._flags & (ContactFlags.Island | ContactFlags.Slow | ContactFlags.NonSolid)) != ContactFlags.None)
{
continue;
}
// Is this contact touching? For performance we are not updating this contact.
if ((cEdge.Contact._flags & ContactFlags.Touch) == 0)
{
continue;
}
_island.Add(cEdge.Contact);
cEdge.Contact._flags |= ContactFlags.Island;
// Update other body.
Body other = cEdge.Other;
// Was the other body already added to this island?
if ((other._flags & BodyFlags.Island) != BodyFlags.None)
{
continue;
}
// March forward, this can do no harm since this is the min TOI.
if (other.IsStatic == false)
{
other.Advance(minTOI);
other.WakeUp();
}
Debug.Assert(queueStart + queueSize < queueCapacity);
queue[queueStart + queueSize] = other;
++queueSize;
other._flags |= BodyFlags.Island;
}
for (JointEdge jEdge = b._jointList; jEdge != null; jEdge = jEdge.Next)
{
if (_island._jointCount == _island._jointCapacity)
{
continue;
}
if (jEdge.Joint._islandFlag == true)
{
continue;
}
_island.Add(jEdge.Joint);
jEdge.Joint._islandFlag = true;
Body other = jEdge.Other;
if ((other._flags & BodyFlags.Island) != BodyFlags.None)
{
continue;
}
if (!other.IsStatic)
{
other.Advance(minTOI);
other.WakeUp();
}
Debug.Assert(queueStart + queueSize < queueCapacity);
queue[queueStart + queueSize] = other;
++queueSize;
other._flags |= BodyFlags.Island;
}
}
TimeStep subStep;
subStep.warmStarting = false;
subStep.dt = (1.0f - minTOI) * step.dt;
subStep.inv_dt = 1.0f / subStep.dt;
subStep.dtRatio = 0.0f;
subStep.velocityIterations = step.velocityIterations;
subStep.positionIterations = step.positionIterations;
_island.SolveTOI(ref subStep);
// Post solve cleanup.
for (int i = 0; i < _island._bodyCount; ++i)
{
// Allow bodies to participate in future TOI islands.
Body b = _island._bodies[i];
b._flags &= ~BodyFlags.Island;
if ((b._flags & (BodyFlags.Sleep | BodyFlags.Frozen)) != BodyFlags.None)
{
continue;
}
if (b.IsStatic)
{
continue;
}
// Update fixtures (for broad-phase).
b.SynchronizeFixtures();
// Invalidate all contact TOIs associated with this body. Some of these
// may not be in the island because they were not touching.
for (ContactEdge ce = b._contactList; ce != null; ce = ce.Next)
{
ce.Contact._flags &= ~ContactFlags.Toi;
}
}
int contactCount = _island._contacts.Count;
for (int i = 0; i < contactCount; ++i)
{
// Allow contacts to participate in future TOI islands.
Contact c = _island._contacts[i];
c._flags &= ~(ContactFlags.Toi | ContactFlags.Island);
}
for (int i = 0; i < _island._jointCount; ++i)
{
// Allow joints to participate in future TOI islands.
Joint j = _island._joints[i];
j._islandFlag = false;
}
// Commit fixture proxy movements to the broad-phase so that new contacts are created.
// Also, some contacts can be destroyed.
_contactManager.FindNewContacts();
}
}
void Solve(ref TimeStep step)
{
// Size the island for the worst case.
_island.Reset(_bodyCount,
_contactManager._contactCount,
_jointCount,
_contactManager.ContactListener);
// Clear all the island flags.
for (Body b = _bodyList; b != null; b = b._next)
{
b._flags &= ~BodyFlags.Island;
}
for (Contact c = _contactManager._contactList; c != null; c = c._next)
{
c._flags &= ~ContactFlags.Island;
}
for (Joint j = _jointList; j != null; j = j._next)
{
j._islandFlag = false;
}
// Build and simulate all awake islands.
//#warning Remove extra allocs
int stackSize = _bodyCount;
Body[] stack = new Body[_bodyCount];
for (Body seed = _bodyList; seed != null; seed = seed._next)
{
if ((seed._flags & (BodyFlags.Island | BodyFlags.Sleep | BodyFlags.Frozen)) != BodyFlags.None)
{
continue;
}
if (seed.IsStatic)
{
continue;
}
// Reset island and stack.
_island.Clear();
int stackCount = 0;
stack[stackCount++] = seed;
seed._flags |= BodyFlags.Island;
// Perform a depth first search (DFS) on the raint graph.
while (stackCount > 0)
{
// Grab the next body off the stack and add it to the island.
Body b = stack[--stackCount];
_island.Add(b);
// Make sure the body is awake.
b._flags &= ~BodyFlags.Sleep;
// To keep islands as small as possible, we don't
// propagate islands across static bodies.
if (b.IsStatic)
{
continue;
}
// Search all contacts connected to this body.
for (ContactEdge ce = b._contactList; ce != null; ce = ce.Next)
{
// Has this contact already been added to an island?
// Is this contact non-solid (involves a sensor).
if ((ce.Contact._flags & (ContactFlags.Island | ContactFlags.NonSolid)) != ContactFlags.None)
{
continue;
}
// Is this contact touching?
if ((ce.Contact._flags & ContactFlags.Touch) == ContactFlags.None)
{
continue;
}
_island.Add(ce.Contact);
ce.Contact._flags |= ContactFlags.Island;
Body other = ce.Other;
// Was the other body already added to this island?
if ((other._flags & BodyFlags.Island) != BodyFlags.None)
{
continue;
}
Debug.Assert(stackCount < stackSize);
stack[stackCount++] = other;
other._flags |= BodyFlags.Island;
}
// Search all joints connect to this body.
for (JointEdge je = b._jointList; je != null; je = je.Next)
{
if (je.Joint._islandFlag == true)
{
continue;
}
_island.Add(je.Joint);
je.Joint._islandFlag = true;
Body other = je.Other;
if ((other._flags & BodyFlags.Island) != BodyFlags.None)
{
continue;
}
Debug.Assert(stackCount < stackSize);
stack[stackCount++] = other;
other._flags |= BodyFlags.Island;
}
}
_island.Solve(ref step, Gravity, _allowSleep);
// Post solve cleanup.
for (int i = 0; i < _island._bodyCount; ++i)
{
// Allow static bodies to participate in other islands.
Body b = _island._bodies[i];
if (b.IsStatic)
{
b._flags &= ~BodyFlags.Island;
}
}
}
// Synchronize fixtures, check for out of range bodies.
for (Body b = _bodyList; b != null; b = b.GetNext())
{
if ((b._flags & (BodyFlags.Sleep | BodyFlags.Frozen)) != BodyFlags.None)
{
continue;
}
if (b.IsStatic)
{
continue;
}
// Update fixtures (for broad-phase).
b.SynchronizeFixtures();
}
// Look for new contacts.
_contactManager.FindNewContacts();
}
/// Destroy a rigid body given a definition. No reference to the definition
/// is retained. This function is locked during callbacks.
/// @warning This automatically deletes all associated shapes and joints.
/// @warning This function is locked during callbacks.
public void DestroyBody(Body b)
{
Debug.Assert(_bodyCount > 0);
Debug.Assert(!IsLocked);
if (IsLocked)
{
return;
}
// Delete the attached joints.
JointEdge je = b._jointList;
while (je != null)
{
JointEdge je0 = je;
je = je.Next;
if (DestructionListener != null)
{
DestructionListener.SayGoodbye(je0.Joint);
}
DestroyJoint(je0.Joint);
}
b._jointList = null;
// Delete the attached contacts.
ContactEdge ce = b._contactList;
while (ce != null)
{
ContactEdge ce0 = ce;
ce = ce.Next;
_contactManager.Destroy(ce0.Contact);
}
b._contactList = null;
// Delete the attached fixtures. This destroys broad-phase proxies.
Fixture f = b._fixtureList;
while (f != null)
{
Fixture f0 = f;
f = f._next;
if (DestructionListener != null)
{
DestructionListener.SayGoodbye(f0);
}
f0.Destroy(_contactManager._broadPhase);
}
b._fixtureList = null;
b._fixtureCount = 0;
// Remove world body list.
if (b._prev != null)
{
b._prev._next = b._next;
}
if (b._next != null)
{
b._next._prev = b._prev;
}
if (b == _bodyList)
{
_bodyList = b._next;
}
--_bodyCount;
}
internal XForm _xf; // the body origin transform
#endregion Fields
#region Constructors
internal Body(BodyDef bd, World world)
{
_flags = 0;
if (bd.isBullet)
{
_flags |= BodyFlags.Bullet;
}
if (bd.fixedRotation)
{
_flags |= BodyFlags.FixedRotation;
}
if (bd.allowSleep)
{
_flags |= BodyFlags.AllowSleep;
}
if (bd.isSleeping)
{
_flags |= BodyFlags.Sleep;
}
_world = world;
_xf.Position = bd.position;
_xf.R.Set(bd.angle);
_sweep.localCenter = bd.massData.center;
_sweep.t0 = 1.0f;
_sweep.a0 = _sweep.a = bd.angle;
_sweep.c0 = _sweep.c = MathUtils.Multiply(ref _xf, _sweep.localCenter);
_jointList = null;
_contactList = null;
_prev = null;
_next = null;
_linearVelocity = bd.linearVelocity;
_angularVelocity = bd.angularVelocity;
_linearDamping = bd.linearDamping;
_angularDamping = bd.angularDamping;
_force = new Vector2(0.0f, 0.0f);
_torque = 0.0f;
_linearVelocity = Vector2.Zero;
_angularVelocity = 0.0f;
_sleepTime = 0.0f;
_invMass = 0.0f;
_I = 0.0f;
_invI = 0.0f;
_mass = bd.massData.mass;
if (_mass > 0.0f)
{
_invMass = 1.0f / _mass;
}
_I = bd.massData.i;
if (_I > 0.0f && (_flags & BodyFlags.FixedRotation) == 0)
{
_invI = 1.0f / _I;
}
if (_invMass == 0.0f && _invI == 0.0f)
{
_type = BodyType.Static;
}
else
{
_type = BodyType.Dynamic;
}
_userData = bd.userData;
_fixtureList = null;
_fixtureCount = 0;
}
protected Joint(JointDef def)
{
_type = def.type;
_bodyA = def.body1;
_bodyB = def.body2;
_collideConnected = def.collideConnected;
_userData = def.userData;
_edgeA = new JointEdge();
_edgeB = new JointEdge();
}
