public static BbDirection2D Create(double x, double y)
{
BbDirection2D direction2D = new BbDirection2D(x, y);
BbInstanceDB.AddToExport(direction2D);
return(direction2D);
}
// BbPosition2D (double[] position)
// :this(BbCoordinate2D.Create(position))
//{
//}
// public static Position2D Create ()
// {
// Position2D position = new Position2D ();
//
// BbInstanceDB.Add (position);
// return position;
// }
//public static BbPosition2D Create (double[] position)
//{
// BbPosition2D position2D = new BbPosition2D (position);
// BbInstanceDB.AddToExport (position2D);
// return position2D;
//}
//public static BbPosition2D Create (BbCoordinate2D coordinate2D)
//{
// BbPosition2D position2D = new BbPosition2D (coordinate2D);
// BbInstanceDB.AddToExport (position2D);
// return position2D;
//}
public static BbPosition2D Create(BbCoordinate2D coordinate2D,
BbDirection2D refDirection)
{
BbPosition2D position = new BbPosition2D(coordinate2D, refDirection);
BbInstanceDB.AddToExport(position);
return(position);
}
// BbPosition2D ()
// :this(BbCoordinate2D.Origin2D)
//{
//}
// BbPosition2D (BbCoordinate2D coordinate2D)
// :this(coordinate2D, BbDirection2D.RefDirection2D)
//{
//}
BbPosition2D(BbCoordinate2D coordinate2D,
BbDirection2D refDirection)
{
ifcAxis2Placement2D = new IfcAxis2Placement2D {
Location = coordinate2D.IfcCartesianPoint,
RefDirection = refDirection.IfcDirection,
};
}
void SetBbDirection2D()
{
XAxis2D = RefDirection2D = BbDirection2D.Create(1, 0);
YAxis2D = BbDirection2D.Create(0, 1);
XAxisMinus2D = BbDirection2D.Create(-1, 0);
YAxisMinus2D = BbDirection2D.Create(0, -1);
Origin2D = BbCoordinate2D.Create();
Position2D = BbPosition2D.Create(Origin2D, RefDirection2D);
}
protected BbSlottedHole(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through
)
: base(hostElement, position, BbSlottedHoleProfile.Create(centerToCenter, radius, refDirection),
location, through, "Slot Hole")
{
}
public static BbSlottedHole Create(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through
)
{
var sl = new BbSlottedHole(hostElement, position, centerToCenter, radius, refDirection, location, through);
BbInstanceDB.AddToExport(sl);
return sl;
}
protected BbSlottedHole(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through
)
: base(
hostElement, position, BbSlottedHoleProfile.Create(centerToCenter, radius, refDirection),
location, through, "Slot Hole")
{
}
public static BbSlottedHole Create(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through
)
{
var sl = new BbSlottedHole(hostElement, position, centerToCenter, radius, refDirection, location, through);
BbInstanceDB.AddToExport(sl);
return(sl);
}
public static BbSlottedHole Create(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through,
BbPropertySet bbPropertySet,
string featureSubType
)
{
var sl = new BbSlottedHole(hostElement, position, centerToCenter, radius, refDirection, location, through);
sl.AddSlottedHoleProperty(bbPropertySet, featureSubType, centerToCenter, centerToCenter + (radius * 2), radius);
BbInstanceDB.AddToExport(sl);
return sl;
}
public static BbSlottedHole Create(
BbElement hostElement,
BbCoordinate2D position,
double centerToCenter,
double radius,
BbDirection2D refDirection,
SemHoleLocation location,
bool through,
BbPropertySet bbPropertySet,
string featureSubType
)
{
var sl = new BbSlottedHole(hostElement, position, centerToCenter, radius, refDirection, location, through);
sl.AddSlottedHoleProperty(bbPropertySet, featureSubType, centerToCenter, centerToCenter + (radius * 2), radius);
BbInstanceDB.AddToExport(sl);
return(sl);
}
public static BbProfile Create(double cToCDistance, double radius, BbDirection2D refDirection)
{
BbProfile ch = new BbSlottedHoleProfile(cToCDistance, radius);
// what is this?
// why it creates derived?
if (refDirection.IfcDirection.DirectionRatios[0] != 1 && refDirection.IfcDirection.DirectionRatios[1] != 0)
{
ch = BbDerivedProfile.Create(ch,
Math.Atan2(refDirection.IfcDirection.DirectionRatios[1],
refDirection.IfcDirection.DirectionRatios[0]));
}
else
{
BbInstanceDB.AddToExport(ch);
}
return(ch);
}
public static BbDirection2D Create(double x, double y)
{
BbDirection2D direction2D = new BbDirection2D (x, y);
BbInstanceDB.AddToExport (direction2D);
return direction2D;
}
public static BbProfile Create(double cToCDistance, double radius, BbDirection2D refDirection)
{
BbProfile ch = new BbSlottedHoleProfile(cToCDistance, radius);
// what is this?
// why it creates derived?
if (refDirection.IfcDirection.DirectionRatios[0] != 1 && refDirection.IfcDirection.DirectionRatios[1] != 0)
{
ch = BbDerivedProfile.Create(ch,
Math.Atan2(refDirection.IfcDirection.DirectionRatios[1],
refDirection.IfcDirection.DirectionRatios[0]));
}
else {
BbInstanceDB.AddToExport(ch);
}
return ch;
}
void SetBbDirection2D()
{
XAxis2D = RefDirection2D = BbDirection2D.Create(1, 0);
YAxis2D = BbDirection2D.Create(0, 1);
XAxisMinus2D = BbDirection2D.Create(-1, 0);
YAxisMinus2D = BbDirection2D.Create(0, -1);
Origin2D = BbCoordinate2D.Create();
Position2D = BbPosition2D.Create(Origin2D, RefDirection2D);
}
public static bool Tester4Writer(string filename)
{
EarlyBindingInstanceModel.Reset();
BbInstanceDB.Reset();
//var em11PsetName = @"AISC_EM11_Pset_Status";
BbHeaderSetting.Create(
"donghoon", "Georgia Tech", "sem Tool", "alpha 1", "gatech", BbUnit.Metric);
var floor = BbFloor.CreateSingleStoreyProject(
"project", "site", "building", "1st floor", 0);
// assembly 1-Beam-------------------------------------------------------------------------------------
var assembly = BbAssembly.Create(
"assid001",
"Steel Assembly",
"ASS01",
"client_marker",
"prelim_marker",
"ship_mark",
"102301123423", floor,
BbCoordinate3D.Create(0, 0, 6000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
// assembly 1 properties
//Quantity
var qAssemBeam = BbQuantityRequired.Create();
qAssemBeam.Add(assembly);
//Finish/tearment
//var paintAssem = BbPaintFinish.Create();
//var paintAssem = BbPaintFinish.Create("Paint", "PAINTED", assembly);
//paintAssem.AddToElement(assembly);
// assembly.AddPaintFinish(paintAssem);
var pSetAssemSTr01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem1Pset = BbSurfaceTreatmentProperty.Create(pSetAssemSTr01, new List <string> {
"Painted"
});
paintAssem1Pset.AssignTo(assembly);
//Scheduling
var pSetAssemSc01 = BbPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch01 = BbSchedule.Create(pSetAssemSc01, "seq01", "seqLevel 01", DateTime.Now);
AssemSch01.AssignTo(assembly);
//Status
var pSetAssemSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat01 = BbStatus.Create(pSetAssemSt01, "Default", "Default", true);
AssemStat01.AssignTo(assembly);
//Drawing number
var pSetAssemDN01 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem1Pset = BbDrawingNumber.Create(pSetAssemDN01, new List <string> {
"DR001PH1005", "DR001PH1004"
});
DnumberAssem1Pset.AssignTo(assembly);
//Version
var pSetAssemVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem01 = BbVersion.Create(pSetAssemVr01, "versionAssem01");
versionAssem01.AssignTo(assembly);
// main piece 1- Beam------------------------------------------------------------------------------------
var profile = BbNamedIProfile.Create("AISC", "W460X260", 260, 508, 22.6, 40.4);
var mainPart = BbMainPiece.Create(
"P0001",
"main piece", profile, 6000,
BbCoordinate3D.Create(0, 0, -254),
BbHeaderSetting.Setting3D.XAxis,
BbHeaderSetting.Setting3D.YAxis,
assembly);
//var beamType = SemBeamType.Create("wideflange", "pm0001", IfcBeamTypeEnum.BEAM);
//beamType.Defines(mainPart);
// Main piece 1-Beam properties
//Identification
var pieceIdBeam01 = BbPieceIdentity.Create("indMark001", "pieceMark001", "prelimMark001", "barcode123456890", true);
pieceIdBeam01.AssignTo(mainPart);
//Material
var pSetMat2 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialBeam01 = BbMaterial.Create("ASTM A992", pSetMat2, "materialID001", "materialCert001", "materialGrade001", "materialType001");
materialBeam01.AssociateTo(mainPart);
//Quantity
var qBeam = BbQuantityRequired.Create();
qBeam.Add(mainPart);
//Finish/treatment
////var paint2 = PaintFinish.Create("p1001", "antirust", "paint");
var coord2d00 = BbCoordinate2D.Create(-100, 0);
var coord2d01 = BbCoordinate2D.Create(100, 0);
var coord2d02 = BbCoordinate2D.Create(100, 3400);
var coord2d03 = BbCoordinate2D.Create(-100, 3400);
var poly2d0 = BbPolyline2D.Create(new[] { coord2d00, coord2d01, coord2d02, coord2d03 });
var coord2d10 = BbCoordinate2D.Create(-40, 1500);
var coord2d11 = BbCoordinate2D.Create(40, 1500);
var coord2d12 = BbCoordinate2D.Create(40, 2500);
var coord2d13 = BbCoordinate2D.Create(-40, 2500);
var poly2d1 = BbPolyline2D.Create(new[] { coord2d10, coord2d11, coord2d12, coord2d13 });
var sg = BbSurfaceGeometry.Create(poly2d0, new[] { poly2d1 });
//var paint3 = SemPaintFinishPatch.Create("ANTIRUST", "PAINTED", sg);
var ploc = BbLocalPlacement3D.Create(
mainPart.ObjectBbLocalPlacement,
BbPosition3D.Create(
BbCoordinate3D.Create(0, 254, 100),
BbHeaderSetting.Setting3D.YAxis,
BbHeaderSetting.Setting3D.XAxisMinus)
);
//paint3.AddToElement(mainPart, ploc);
var pSetBeamSTr01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintBeam1Pset = BbSurfaceTreatmentProperty.Create(pSetBeamSTr01, new List <string> {
"GALVANIZED"
});
paintBeam1Pset.AssignTo(mainPart);
//Status
var pSetBeamSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusBeam01 = BbStatus.Create(pSetBeamSt01, "Default", "Default", false);
statusBeam01.AssignTo(mainPart);
//Version
var pSetBeamVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionBeam01 = BbVersion.Create(pSetBeamVr01, "versionBeam01");
versionBeam01.AssignTo(mainPart);
//Tolerance
var pSetBeamLT01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceBeam01 = BbLayoutTolerance.Create(pSetBeamLT01, 0.01);
toleranceBeam01.AssignTo(mainPart);
//Catellation
//No castellation needed
//Feature
//SemAnnotation.Create
// ("north", "LocationOfMark", mainPart, BbCoordinate3D.Create(0, 254, 5), BbDirection3D.YAxis2D,
// BbDirection3D.XAxisMinus2D);
//BbPosition3D pos = BbPosition3D.Create(
// BbCoordinate3D.Create(0, 0, 100),
// BbDirection3D.Create(0.215665546, -0.107832773, -0.970494959),
// BbDirection3D.Create(-0.970494959, 0.107832773, -0.215665546)
// );
//BbSkewedEnd.Create(mainPart, pos);
//// var arb = ArbitraryProfile.Create(poly2d0);
////
//// ExtrudedElement.Create(
//// "new", arb, 10, Coordinate3D.Create(0, 254, 100),
//// Direction3D.YAxis2D, Direction3D.XAxisMinus2D,
//// mainPart, typeof(IfcPlate));
////// TypeProduct.Create(mainPart, "main piece", typeof(IfcBeam));
//BbCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.BottomRight);
//BbCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.TopRight);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.BottomLeft);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.TopLeft);
var bHoleBeam01 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1100, 60), 30, SemHoleLocation.Bottom, false);
var bHoleBeam02 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1100, -60), 30, SemHoleLocation.Bottom, true);
var bHoleBeam03 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1200, 60), 30, SemHoleLocation.Top, true);
var bHoleBeam04 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1200, -60), 30, SemHoleLocation.Top, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(300, 60), 15, HoleLocation.Left, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(400, -60), 15, HoleLocation.Left, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(500, 60), 15, HoleLocation.Right, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(600, -60), 15, HoleLocation.Right, true);
var bHoleBeam05 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(700, 60), 15, SemHoleLocation.Web, false);
var bHoleBeam06 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(800, -60), 15, SemHoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 106.5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 91.5, 100), 20, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, 100), 15, HoleLocation.Web, true);
//Beam Bolt Hole properties
var pSetBeamBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleBeamPset1 = BbBoltHoleProperties.Create(pSetBeamBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleBeamPset1.AssignTo(bHoleBeam01);
boltHoleBeamPset1.AssignTo(bHoleBeam02);
boltHoleBeamPset1.AssignTo(bHoleBeam03);
boltHoleBeamPset1.AssignTo(bHoleBeam04);
boltHoleBeamPset1.AssignTo(bHoleBeam05);
boltHoleBeamPset1.AssignTo(bHoleBeam06);
// Stiffeners-------------------------------------------------------------------------------------------
//Stiffener1
var stiffener1 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(65, 0, 5000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner1 properties
//Identification
var stiffIdentity1 = BbPieceIdentity.Create("indMark002", "pieceMark002", "prelimMark002", "barcode123456892", false);
stiffIdentity1.AssignTo(stiffener1);
//Status
var pSetStstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusstiff01 = BbStatus.Create(pSetStstiff01, "ReadyForProcurement", "Default", true);
statusstiff01.AssignTo(stiffener1);
//Version
var pSetVrstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionstiff01 = BbVersion.Create(pSetVrstiff01, "versionStiff01");
versionstiff01.AssignTo(stiffener1);
//Tolerance
var pSetLystiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var tolerancestiff01 = BbLayoutTolerance.Create(pSetLystiff01, 0.01);
tolerancestiff01.AssignTo(stiffener1);
//Quantity
var qStiff = BbQuantityRequired.Create();
qStiff.Add(stiffener1);
//Material
var pSetMat1 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialStiff = BbMaterial.Create("ASTM A992", pSetMat1, "materialID002",
"materialCert002", "materialGrade002", "materialType002");
materialStiff.AssociateTo(stiffener1);
//Finish/treatment
//var paintStiff = BbPaintFinish.Create("stiffener paint", "PAINTED", stiffener1);
//paintStiff.AddToElement(stiffener1);
var pSetSTstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintStiffPset = BbSurfaceTreatmentProperty.Create(pSetSTstiff01, new List <string> {
"Galvanized"
});
paintStiffPset.AssignTo(stiffener1);
//Stiffener2-------------------------------
var stiffener2 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(-65, 0, 5000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner2 properties
//Identification
var stiffIdentity2 = BbPieceIdentity.Create("indMark003", "pieceMark003", "prelimMark003", "barcode123456893", false);
stiffIdentity2.AssignTo(stiffener2);
//Status
statusstiff01.AssignTo(stiffener2);
//Version
versionstiff01.AssignTo(stiffener2);
//Tolerance
tolerancestiff01.AssignTo(stiffener2);
//Quantity
qStiff.Add(stiffener2);
//Material
materialStiff.AssociateTo(stiffener2);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener2);
// stiffener2.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener2);
//Stiffener3-------------------------------
var stiffener3 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(65, 0, 4600), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner3 properties
//Identification
var stiffIdentity3 = BbPieceIdentity.Create("indMark004", "pieceMark004", "prelimMark004", "barcode123456894", false);
stiffIdentity3.AssignTo(stiffener3);
//Status
statusstiff01.AssignTo(stiffener3);
//Version
versionstiff01.AssignTo(stiffener3);
//Tolerance
tolerancestiff01.AssignTo(stiffener3);
//Quantity
qStiff.Add(stiffener3);
//Material
materialStiff.AssociateTo(stiffener3);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener3);
//stiffener3.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener3);
//Stiffener4-------------------------------
var stiffener4 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(-65, 0, 4600), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner4 properties
//Identification
var stiffIdentity4 = BbPieceIdentity.Create("indMark005", "pieceMark005", "prelimMark005", "barcode123456895", false);
stiffIdentity4.AssignTo(stiffener4);
//Status
statusstiff01.AssignTo(stiffener4);
//Version
versionstiff01.AssignTo(stiffener4);
//Tolerance
tolerancestiff01.AssignTo(stiffener4);
//Quantity
qStiff.Add(stiffener4);
//Material
materialStiff.AssociateTo(stiffener4);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener4);
//stiffener4.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener4);
// welding stiffeners with beam //DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
//BbSlottedHole.Create(mainPart, BbCoordinate2D.Create(3000, 50), 70, 30, BbDirection2D.RefDirection2D,
// SemHoleLocation.Web, true);
//2 Clip angles for column1----------------------------------------------------------------------------------
var aProfile = BbNamedLProfile.Create("AISC", "L203X152X19", 203, 152, 19);
var derived1 = BbDerivedProfile.Create(aProfile, false, true);
// -90.3 for showing gap between elements
var angle = BbClipAngle.Create(
"a00102",
"angle",
derived1, 360,
//BbCoordinate3D.Create(5898.5, 90.3, -180 - 254),
BbCoordinate3D.Create(90.3, -180, 5898.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//var w000 = BbCoordinate3D.Create(5898.5, 0, 0);
//var w001 = BbCoordinate3D.Create(5898.5, 0, 200);
var w000 = BbCoordinate3D.Create(5898.5, 0, 0);
var w001 = BbCoordinate3D.Create(5898.5, 0, 200);
var curve = BbPolyline3D.Create(new BbCoordinate3D[] { w000, w001 });
var curveGeometry = BbCurveGeometry.Create(curve);
//Clip angle 1 properties
//Identification
var angleIdentity1 = BbPieceIdentity.Create("indMark006", "pieceMark006", "prelimMark006", "barcode123456896", false);
angleIdentity1.AssignTo(angle);
//Status
var pSetStAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusAngle01 = BbStatus.Create(pSetStAngle01, "ReadyForProcurement", "Default", false);
statusAngle01.AssignTo(angle);
//Version
var pSetVrAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAngle01 = BbVersion.Create(pSetVrAngle01, "versionAngle001");
versionAngle01.AssignTo(angle);
//Tolerance
var pSetLyAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceAngle01 = BbLayoutTolerance.Create(pSetLyAngle01, 0.01);
toleranceAngle01.AssignTo(angle);
//Quantity
var qAngle = BbQuantityRequired.Create();
qAngle.Add(angle);
//Material
var pSetMat3 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialAngle = BbMaterial.Create("ASTM A992", pSetMat3, "materialID003",
"materialCert003", "materialGrade003", "materialType003");
materialAngle.AssociateTo(angle);
//Finish/treatment
//var paintAngle = BbPaintFinish.Create("angle blasted", "BLASTED", angle);
//angle.AddPaintFinish(paintAngle);
//paintAngle.AddToElement(angle);
var pSetSTAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAnglePset = BbSurfaceTreatmentProperty.Create(pSetSTAngle01, new List <string> {
"Galvanized"
});
paintAnglePset.AssignTo(angle);
//Feature
//DrillHoles.Create(angle, Coordinate2D.Create(100, -5), 15, HoleLocation.Bottom, false);
//DrillHoles.Create(angle, Coordinate2D.Create(300, 10), 20, HoleLocation.Bottom, false);
var bHoleAngle01 = BbDrillHoles.Create(angle, BbCoordinate2D.Create(80, 9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle02 = BbDrillHoles.Create(angle, BbCoordinate2D.Create(280, 9.5), 20, SemHoleLocation.Right, false);
//Clip Angle1 Bolt Hole properties
var pSetAngleBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleAnglePset1 = BbBoltHoleProperties.Create(pSetAngleBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleAnglePset1.AssignTo(bHoleAngle01);
boltHoleAnglePset1.AssignTo(bHoleAngle02);
var derived = BbDerivedProfile.Create(aProfile, true, true);
var angle2 = BbClipAngle.Create("a00103",
"angle", derived, 360,
//BbCoordinate3D.Create(5898.5, -90.3, -180 - 254),
BbCoordinate3D.Create(-90.3, -180, 5898.5),
//BbDirection3D.ZAxis, BbDirection3D.XAxis2D,
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart);
//Clip angle 2 properties
//Identification
var angleIdentity2 = BbPieceIdentity.Create("indMark007", "pieceMark007", "prelimMark007", "barcode123456897", false);
angleIdentity2.AssignTo(angle2);
//Status
statusAngle01.AssignTo(angle2);
//Version
versionAngle01.AssignTo(angle2);
//Tolerance
toleranceAngle01.AssignTo(angle2);
//Quantity
qAngle.Add(angle2);
//Material
materialAngle.AssociateTo(angle2);
//Finish/treatment
//angle2.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle2);
//paintAnglePset.AssignTo(angle2);
//DrillHoles.Create(angle2, Coordinate2D.Create(100, -5), 15, HoleLocation.Top, false);
//DrillHoles.Create(angle2, Coordinate2D.Create(300, 10), 20, HoleLocation.Top, false);
var bHoleAngle03 = BbDrillHoles.Create(angle2, BbCoordinate2D.Create(80, -9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle04 = BbDrillHoles.Create(angle2, BbCoordinate2D.Create(280, -9.5), 20, SemHoleLocation.Right, false);
//Clip Angle2 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle03);
boltHoleAnglePset1.AssignTo(bHoleAngle04);
var w1 = BbWeld.Create(mainPart, angle);
//var w1 = BbWeld.Create("Tee Joint", mainPart, angle);
//var w2 = Weld.Create("Tee Joint", mainPart, angle2);
w1.AddWeldingPath(curveGeometry, BbCoordinate3D.Create(0.0, 0.0, 0.0));
var pSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Weld");
w1.AddProperties(pSetw1, "weld id", "weld description", "wps code", "category", "weld grade", 100, false);
w1.AddProperties(pSetw1, "weld type1", "weld type2", "weld surface1", "weld surface 2", 123, "weld process",
1, 2, 3, 4, 5, 6, 7, 8, false, false);
pSetw1.AssignTo(w1);
var wc000 = BbCoordinate3D.Create(5898.5, 0, 0);
var wc001 = BbCoordinate3D.Create(5898.5, 0, 200);
var ccurve = BbPolyline3D.Create(new BbCoordinate3D[] { wc000, wc001 });
var ccurveGeometry = BbCurveGeometry.Create(ccurve);
var boltAss = BbBoltAssembly.Create(mainPart, angle, ccurveGeometry, BbCoordinate3D.Create(1200, 60, 0));
var nut = BbNut.Create(boltAss);
var nutPSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Nut");
nut.AddProperties(nutPSetw1, "nut standard", "nut type", 5, 3, false);
nutPSetw1.AssignTo(nut);
var washer1 = BbWasher.Create(boltAss);
var washerPSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw1, "washer standard", "washer type", 5, 2, false);
washerPSetw1.AssignTo(washer1);
var washer2 = BbWasher.Create(boltAss);
var washerPSetw2 = BbPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw2, "washer standard", "washer type", 5, 1, true);
washerPSetw2.AssignTo(washer2);
//w1.AddProperties();
//var wtype = SemWeldType.Create("Tee Joint", "tj0001");
//wtype.Defines(w1);
//wtype.Defines(w2);
////var derived2 = DerivedProfile.Create(aProfile, true, false);
////var angle3 = SteelPiece.Create("a00104",
//// "angle", derived2, 400,
//// Coordinate3D.Create(101.5, -90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis2D, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle3, Coordinate2D.Create(100, 5), 15, HoleLocation.Top, false);
//////DrillHoles.Create(angle3, Coordinate2D.Create(300, 5), 15, HoleLocation.Top, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(100, -10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(300, -10), 15, HoleLocation.Left, false);
////var angle4 = SteelPiece.Create("a00105",
//// "angle", aProfile, 400,
//// Coordinate3D.Create(101.5, 90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis2D, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle4, Coordinate2D.Create(100, 5), 15, HoleLocation.Bottom, false);
//////DrillHoles.Create(angle4, Coordinate2D.Create(300, 5), 15, HoleLocation.Bottom, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(100, 10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(300, 10), 15, HoleLocation.Left, false);
//Clip angle for column2----------------------------------------------------------------------------------
var derived3 = BbDerivedProfile.Create(aProfile, true, false);
var angle3 = BbClipAngle.Create(
"a00103",
"angle",
derived3, 360,
BbCoordinate3D.Create(-90.3, -180, 5898.5 - 5798.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//Clip angle 3 properties
//Identification
var angleIdentity3 = BbPieceIdentity.Create("indMark008", "pieceMark008", "prelimMark008", "barcode123456898", false);
angleIdentity3.AssignTo(angle3);
//Status
statusAngle01.AssignTo(angle3);
//Version
versionAngle01.AssignTo(angle3);
//Tolerance
toleranceAngle01.AssignTo(angle3);
//Quantity
qAngle.Add(angle3);
//Material
materialAngle.AssociateTo(angle3);
//Finish/treatment
//angle3.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle3);
//paintAnglePset.AssignTo(angle3);
var bHoleAngle05 = BbDrillHoles.Create(angle3, BbCoordinate2D.Create(80, -10), 15, SemHoleLocation.Left, false);
var bHoleAngle06 = BbDrillHoles.Create(angle3, BbCoordinate2D.Create(280, -10), 15, SemHoleLocation.Left, false);
//Clip Angle3 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle05);
boltHoleAnglePset1.AssignTo(bHoleAngle06);
var derived4 = BbDerivedProfile.Create(aProfile, false, false);
var angle4 = BbClipAngle.Create(
"a00104",
"angle",
derived4, 360,
BbCoordinate3D.Create(90.3, -180, 5898.5 - 5798.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//Clip angle 4 properties
//Identification
var angleIdentity4 = BbPieceIdentity.Create("indMark009", "pieceMark009", "prelimMark009", "barcode123456899", false);
angleIdentity4.AssignTo(angle4);
//Status
statusAngle01.AssignTo(angle4);
//Version
versionAngle01.AssignTo(angle4);
//Tolerance
toleranceAngle01.AssignTo(angle4);
//Quantity
qAngle.Add(angle4);
//Material
materialAngle.AssociateTo(angle4);
//Finish/treatment
//angle4.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle4);
//paintAnglePset.AssignTo(angle4);
var bHoleAngle07 = BbDrillHoles.Create(angle4, BbCoordinate2D.Create(80, 10), 15, SemHoleLocation.Left, false);
var bHoleAngle08 = BbDrillHoles.Create(angle4, BbCoordinate2D.Create(280, 10), 15, SemHoleLocation.Left, false);
boltHoleAnglePset1.AssignTo(bHoleAngle07);
boltHoleAnglePset1.AssignTo(bHoleAngle08);
// welding column 2 & beam with angle 3,4//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
// Assembly 2- Column1-------------------------------------------------------------------------------------
var assembly2 = BbAssembly.Create(
"assid003",
"Steel Assembly",
"ASS02", "client_marker2",
"prelim_marker2",
"ship_mark2",
"202301123433",
floor,
BbCoordinate3D.Create(6014.3, 0, 0),
BbHeaderSetting.Setting3D.ZAxis,
BbHeaderSetting.Setting3D.XAxis);
// assembly 2 properties
//Quantity
var qAssemCol1 = BbQuantityRequired.Create();
qAssemCol1.Add(assembly2);
//Finish/tearment
//var paintAssem2 = BbPaintFinish.Create("Assy gal", "GALVANIZED",assembly2);
//assembly2.AddPaintFinish(paintAssem2);
//paintAssem2.AddToElement(assembly2);
var pSetAssemSTr02 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem2Pset = BbSurfaceTreatmentProperty.Create(pSetAssemSTr02, new List <string> {
"Galvanized"
});
paintAssem2Pset.AssignTo(assembly2);
//Scheduling
var pSetAssemSc02 = BbPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch02 = BbSchedule.Create(pSetAssemSc02, "seq01", "seqLevel 01", DateTime.Now);
AssemSch02.AssignTo(assembly2);
//Status
var pSetAssemSt02 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat02 = BbStatus.Create(pSetAssemSt02, "Default", "Default", true);
AssemStat02.AssignTo(assembly2);
//Drawing number
var pSetAssemDN02 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem2Pset = BbDrawingNumber.Create(pSetAssemDN02, new List <string> {
"DR001PH1006", "DR001PH1005"
});
DnumberAssem2Pset.AssignTo(assembly2);
//Version
var pSetAssemVr02 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem02 = BbVersion.Create(pSetAssemVr02, "versionAssem02");
versionAssem02.AssignTo(assembly2);
//Main Piece 2- Column1
var mainPart2 = BbMainPiece.Create(
"c00102",
"main piece",
profile, 6000,
BbHeaderSetting.Setting3D.DefaultOrigin,
BbHeaderSetting.Setting3D.ZAxis,
BbHeaderSetting.Setting3D.XAxis,
assembly2);
// Column1 properties
//Identification
var pieceIdCol01 = BbPieceIdentity.Create("indMark010", "pieceMark010", "prelimMark010", "barcode123456880", true);
pieceIdCol01.AssignTo(mainPart2);
//Status
var pSetColSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol01 = BbStatus.Create(pSetColSt01, "ReadyForProcurement", "Default", true);
statusCol01.AssignTo(mainPart2);
//Version
var pSetColVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol01 = BbVersion.Create(pSetColVr01, "versionCol001");
versionCol01.AssignTo(mainPart2);
//Tolerance
var pSetColLy01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceCol01 = BbLayoutTolerance.Create(pSetColLy01, 0.002);
toleranceCol01.AssignTo(mainPart2);
//Quantity
var qPieceCol = BbQuantityRequired.Create();
qPieceCol.Add(mainPart2);
//Material
var pSetMat4 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialCol1 = BbMaterial.Create("ASTM A992", pSetMat4, "materialID004",
"materialCert004", "materialGrade004", "materialType004");
materialCol1.AssociateTo(mainPart2);
//Finish/treatment
//var paintCol1 = BbPaintFinish.Create("paint col", "PAINTED", mainPart2);
//mainPart2.AddPaintFinish(paintCol1);
//paintCol1.AddToElement(mainPart2);
var pSetColST01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintColPset = BbSurfaceTreatmentProperty.Create(pSetColST01, new List <string> {
"Blast"
});
paintColPset.AssignTo(mainPart2);
//Castellation
//var pSetCt02 = BbPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = BbCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
//Features
var bHoleCol01 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol02 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol03 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol04 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
var pSetColBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleColPset1 = BbBoltHoleProperties.Create(pSetColBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 20, false, 0);
boltHoleColPset1.AssignTo(bHoleCol01);
boltHoleColPset1.AssignTo(bHoleCol02);
boltHoleColPset1.AssignTo(bHoleCol03);
boltHoleColPset1.AssignTo(bHoleCol04);
BbSlottedHole.Create(mainPart2, BbCoordinate2D.Create(5000, 50), 100, 30, BbDirection2D.Create(0.9, 0.3),
SemHoleLocation.Web, true);
//Slotted Hole properties
// welding colum 1 with angle//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
//SemConnectedElements.Create(assembly, assembly2);
///////////////////////////////////////////weld
//var wp = BbWeldProperties.Create(10, 14);
//wp.AssignTo(w1);
//wp.AssignTo(w2);
// Assembly 3- Column2----------------------------------------------------------------------------------------
var assembly3 = BbAssembly.Create(
"assid003", "Steel Assembly", "ASS02", "client_marker3", "prelim_marker3", "ship_mark3", "302301123425",
floor,
BbCoordinate3D.Create(-14.3, 0, 0), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
// Assembly 3 properties
//Quantity
qAssemCol1.Add(assembly3);
//Finish/tearment
//assembly3.AddPaintFinish(paintAssem2);
//paintAssem2.AddToOtherElement(assembly3);
//paintAssem2Pset.AssignTo(assembly3);
//Scheduling
AssemSch02.AssignTo(assembly3);
//Status
AssemStat02.AssignTo(assembly3);
//Drawing number
var pSetAssemDN03 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem3Pset = BbDrawingNumber.Create(pSetAssemDN03, new List <string> {
"DR001PH1006", "DR001PH1005", "DR001PH1008"
});
DnumberAssem3Pset.AssignTo(assembly3);
//Version
versionAssem02.AssignTo(assembly3);
//Main Piece 3- Column 2
var mainPart3 = BbMainPiece.Create("c20010",
"main piece", profile, 6000,
BbHeaderSetting.Setting3D.DefaultOrigin, BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, assembly3);
//Column2 properties
//Identification
var pieceIdCol02 = BbPieceIdentity.Create("indMark011", "pieceMark011", "prelimMark011", "barcode123456881", true);
pieceIdCol02.AssignTo(mainPart3);
//Status
var pSetColSt02 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol02 = BbStatus.Create(pSetColSt02, "ReadyForMill", "Default", true);
statusCol02.AssignTo(mainPart3);
//Version
var pSetColVr02 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol02 = BbVersion.Create(pSetColVr02, "versionCol002");
versionCol02.AssignTo(mainPart3);
//Tolerance
toleranceCol01.AssignTo(mainPart3);
//Quantity
qPieceCol.Add(mainPart3);
//Material
materialCol1.AssociateTo(mainPart3);
//Finish/treatment
//mainPart3.AddPaintFinish(paintCol1);
//paintCol1.AddToOtherElement(mainPart3);
//paintColPset.AssignTo(mainPart3);
//Castellation- not required
//var pSetCt02 = BbPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = BbCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
// Column2 features
var bHoleCol05 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol06 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol07 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol08 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
boltHoleColPset1.AssignTo(bHoleCol05);
boltHoleColPset1.AssignTo(bHoleCol06);
boltHoleColPset1.AssignTo(bHoleCol07);
boltHoleColPset1.AssignTo(bHoleCol08);
return(BbInstanceDB.Write(filename));
}