public clsOilInlet(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//=====================================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
mCount_MainOilSupply = 1;
mOrifice.StartPos = eOrificeStartPos.Below;
mOrifice.Ratio_L_D = 1.5;
}
public clsPad(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//==============================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
//....Default Values:
mCount = 4;
mPivot.Offset = 50.0F;
}
public clsARP(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//=====================================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
mDowel = new clsPin(mCurrent_Bearing_Radial_FP.Unit.System);
mDowel.Spec_Type = "P";
mDowel.Spec_Mat = "STEEL";
mOffset_Direction = "CCW";
mInsertedOn = eInsertedOn.BearingOD;
}
public clsSL(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//=============================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
//....Screw.
//
mScrew = new clsScrew(mCurrent_Bearing_Radial_FP.Unit.System);
mScrew.Spec_Type = "SHCS";
mScrew.Spec_Mat = "STEEL";
//....Dowel.
//
mDowel = new clsPin(mCurrent_Bearing_Radial_FP.Unit.System);
mDowel.Spec_Type = "P";
mDowel.Spec_Mat = "STEEL";
}
public clsFlange(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//=================================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
}
//public Double Clearance()
////-----------------------
//{
// return (mBore_Range[0] - mDShaft_Range[0]);
//}
//public Double PreLoad()
////---------------------
//{
// Double pPreLoad = 0.0f;
// pPreLoad = (PadBore() - Bore()) / (PadBore() - DShaft());
// return pPreLoad;
//}
#endregion
#endregion
#region "VALIDATION ROUTINE:"
//public Double Validate_Depth_EndConfig (Double Depth_In)
////======================================================
//{
// if (Depth_In < mc_DEPTH_END_CONFIG_MIN)
// {
// string pMsg = " End config. depth should not be less than the design minimum value of, "
// + mc_DEPTH_END_CONFIG_MIN + ".";
// MessageBox.Show(pMsg);
// Depth_In = mc_DEPTH_END_CONFIG_MIN;
// }
// return Depth_In;
//}
#endregion
#region "CLASS OBJECTS COPYING & COMPARISON ROUTINES:"
public bool Compare(clsBearing_Radial_FP Bearing_In, string FormName_In)
//=======================================================================
{
bool mblnVal_Changed = false;
//int pRetValue = 0;
//if (FormName_In == "Bearing")
//{
// if (modMain.CompareVar(Bearing_In.SplitConfig, mSplitConfig, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// for (int i = 0; i < 2; i++)
// {
// if (modMain.CompareVar(Bearing_In.DShaft_Range[i], mDShaft_Range[i], 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.DFit_Range[i], mDFit_Range[i], 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.DPad_Range[i], mDPad_Range[i], 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.DSet_Range[i], mDSet_Range[i], 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// }
// if (modMain.CompareVar(Bearing_In.Pad.Count, mPad.Count, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.L, mPad.L, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// //if (modMain.CompareVar(Bearing_In.Pad.Ang, mPad.Ang, 0, pRetValue) > 0)
// //{
// // mblnVal_Changed = true;
// //}
// //if (modMain.CompareVar(Bearing_In.Pad.RFillet, mPad.RFillet, 3, pRetValue) > 0)
// //{
// // mblnVal_Changed = true;
// //}
// if (modMain.CompareVar(Bearing_In.Pad.Pivot.AngStart, mPad.Pivot.AngStart, 0, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.Pivot.Offset, mPad.Pivot.Offset, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.T.Lead, mPad.T.Lead, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.T.Pivot, mPad.T.Pivot, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.T.Trail, mPad.T.Trail, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlexurePivot.Web.T, mFlexurePivot.Web.T, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlexurePivot.Web.RFillet, mFlexurePivot.Web.RFillet, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlexurePivot.Web.H, mFlexurePivot.Web.H, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlexurePivot.GapEDM, mFlexurePivot.GapEDM, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlexurePivot.Rot_Stiff, mFlexurePivot.Rot_Stiff, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.Orifice.D, mOilInlet.Orifice.D, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Mat.Base, mMat.Base, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Mat.Lining, mMat.Lining, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Mat.LiningExists, mMat.LiningExists, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.LiningT, mLiningT, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad.Type.ToString(), mPad.Type.ToString(), pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// //if (modMain.CompareVar(Bearing_In.L_Tot, mL_Tot,4, pRetValue) > 0)
// //{
// // mblnVal_Changed = true;
// //}
//}
//else if (FormName_In == "Performance")
//{
// if (modMain.CompareVar(Bearing_In.mPerformData.Power_HP, mPower_HP, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FlowReqd_gpm, mFlowReqd_gpm, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempRise_F, mTempRise_F, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TFilm_Min, mTFilm_Min, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad_Perform_Max.TempRise, mPad_Perform_Max.TempRise, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad_Perform_Max.Press, mPad_Perform_Max.Press, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad_Perform_Max.Rot, mPad_Perform_Max.Rot, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad_Perform_Max.Load, mPad_Perform_Max.Load, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.Pad_Perform_Max.Stress, mPad_Perform_Max.Stress, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
//}
//else if (FormName_In == "Bearing Design Details")
//{
// if (modMain.CompareVar(Bearing_In.L, mL, 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.Count_MainOilSupply, mOilInlet.Count_MainOilSupply, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.Annulus.Ratio_L_H, mOilInlet.Annulus.Ratio_L_H, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.Annulus.L, mOilInlet.Annulus.L, 3, pRetValue) > 0) //SB 15MAR10
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.Annulus.D, mOilInlet.Annulus.D, 3, pRetValue) > 0) //SB 15MAR10
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.OilInlet.OrificeStartPos.ToString(), mOilInlet.OrificeStartPos.ToString(), pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.MillRelief.Exists, mMillRelief.Exists, pRetValue) > 0) //SB 26MAY09
// {
// mblnVal_Changed = true;
// }
// //if (modMain.CompareVar(Bearing_In.MillRelief.D, mMillRelief.D,3, pRetValue) > 0) //SG 09JAN12 Review
// //{
// // mblnVal_Changed = true;
// //}
// if (modMain.CompareVar(Bearing_In.SplitLine_Screw_Spec.Type, mSplitLine_Screw_Spec.Type, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Screw_Spec.D_Desig, mSplitLine_Screw_Spec.D_Desig, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Screw_Spec.Pitch, mSplitLine_Screw_Spec.Pitch, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Screw_Spec.L, mSplitLine_Screw_Spec.L, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Screw_Spec.Mat, mSplitLine_Screw_Spec.Mat, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Dowel_Spec.Type, mSplitLine_Dowel_Spec.Type, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Dowel_Spec.D_Desig, mSplitLine_Dowel_Spec.D_Desig, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Dowel_Spec.L, mSplitLine_Dowel_Spec.L, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SplitLine_Dowel_Spec.Mat, mSplitLine_Dowel_Spec.Mat, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Spec.Type, mAntiRot_Pin_Spec.Type, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Spec.D_Desig, mAntiRot_Pin_Spec.D_Desig, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Spec.L, mAntiRot_Pin_Spec.L, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Spec.Mat, mAntiRot_Pin_Spec.Mat, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Loc.Angle, mAntiRot_Pin_Loc.Angle, 0, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Loc.Dist_Front, mAntiRot_Pin_Loc.Dist_Front, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// //if (modMain.CompareVar(Bearing_In.AntiRotPin.Loc.From_BearingSplit.ToString(), mAntiRotPin.Loc.From_BearingSplit.ToString(), pRetValue) > 0)
// //{
// // mblnVal_Changed = true;
// //}
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Loc.Bearing_Vert.ToString(), mAntiRot_Pin_Loc.Bearing_Vert.ToString(), pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Loc.Casing_SL.ToString(), mAntiRot_Pin_Loc.Casing_SL.ToString(), pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.AntiRot_Pin_Loc.Offset, mAntiRot_Pin_Loc.Offset, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FrontMountingHoles.GoThru, mEndConfig_MountingHoles_Front.GoThru, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.FrontMountingHoles.Depth, mEndConfig_MountingHoles_Front.Depth, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.PartNo, mEndConfig_MountFixture_Sel_Front.PartNo, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.DBC, mEndConfig_MountFixture_Sel_Front.DBC, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.D_Finish, mEndConfig_MountFixture_Sel_Front.D_Finish, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.PartNo, mEndConfig_MountFixture_Sel_Front.PartNo, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.Hole.Count, mEndConfig_MountFixture_Sel_Front.Hole.Count, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.HolesEqiSpaced, mEndConfig_MountFixture_Sel_Front.HolesEqiSpaced, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.HolesAngStart, mEndConfig_MountFixture_Sel_Front.HolesAngStart, 0, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.HolesAngStart_Comp_Chosen, mEndConfig_MountFixture_Sel_Front.HolesAngStart_Comp_Chosen, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// for (int i = 0; i < (mc_COUNT_MOUNT_HOLES_ANG_OTHER_MAX); i++)
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Front.HolesAngOther[i], mEndConfig_MountFixture_Sel_Front.HolesAngOther[i], 0, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Thread_Front.Type, mEndConfig_MountFixture_Sel_Front_Thread.Type, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Thread_Front.D_Desig, mEndConfig_MountFixture_Sel_Front_Thread.D_Desig, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Thread_Front.L, mEndConfig_MountFixture_Sel_Front_Thread.L, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Thread_Front.Pitch, mEndConfig_MountFixture_Sel_Front_Thread.Pitch, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.SealMountFixture_Sel_Thread_Front.Mat, mEndConfig_MountFixture_Sel_Front_Thread.Mat, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.CanLength, mTempSensorHoles.CanLength, 3, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.Exists, mTempSensorHoles.Exists, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.Loc.ToString(), mTempSensorHoles.Loc.ToString(), pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.Count, mTempSensorHoles.Count, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.D, mTempSensorHoles.D, 4, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
// if (modMain.CompareVar(Bearing_In.TempSensorHoles.AngStart, mTempSensorHoles.AngStart, 0, pRetValue) > 0)
// {
// mblnVal_Changed = true;
// }
//}
return(mblnVal_Changed);
}
public clsEDM_Pad(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//==================================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
}
public clsMillRelief(clsBearing_Radial_FP Current_Bearing_Radial_FP_In)
//======================================================================
{
mCurrent_Bearing_Radial_FP = Current_Bearing_Radial_FP_In;
}