// Bake
//----------------------------------------------------------
//Render Buffer는 Bake가 3단계로 이루어진다.
//데이터가 절차적으로 생성되는 바람에.. 어쩔 수 없이... 힁
public void Bake_Init(apPortrait portrait, apOptRootUnit rootUnit, apRootUnit srcRootUnit)
{
Clear();
_bakedBuffers.Clear();
_ZPerDepth = portrait._bakeZSize;
}
//추가 12.6
//Sorted Render Buffer에 대한 Bake
public void BakeSortedRenderBuffer(apPortrait portrait, apRootUnit srcRootUnit)
{
if (_sortedRenderBuffer == null)
{
_sortedRenderBuffer = new apOptSortedRenderBuffer();
}
_sortedRenderBuffer.Bake_Init(portrait, this, srcRootUnit);
}
// Bake
//----------------------------------------------------------
//Render Buffer는 Bake가 3단계로 이루어진다.
//데이터가 절차적으로 생성되는 바람에.. 어쩔 수 없이... 힁
public void Bake_Init(apPortrait portrait, apOptRootUnit rootUnit, apRootUnit srcRootUnit)
{
Clear();
_bakedBuffers.Clear();
_ZPerDepth = portrait._bakeZSize;
_sortingOrderOption = portrait._sortingOrderOption; //추가 19.8.19
SetSortingOrderChangedAutomatically(true);
}
// 제어 함수
/// <summary>
/// [Please do not use it] Set Root Unit in Editor
/// </summary>
/// <param name="rootUnit"></param>
public void SetRootUnit_Editor(apRootUnit rootUnit)
{
bool isChanged = (_curRootUnitInEditor != rootUnit);
_curRootUnitInEditor = rootUnit;
if (isChanged)
{
_curAnimClipInEditor = null;
}
}
// GUI
//------------------------------------------------------------------
void OnGUI()
{
int width = (int)position.width;
int height = (int)position.height;
if (_editor == null || _targetPortrait == null)
{
Debug.LogError("Exit - Editor / Portrait is Null");
CloseDialog();
return;
}
//만약 Portriat가 바뀌었거나 Editor가 리셋되면 닫자 + Overall Menu가 아니라면..
if (_editor != apEditor.CurrentEditor || _targetPortrait != apEditor.CurrentEditor._portrait || _editor.Select.SelectionType != apSelection.SELECTION_TYPE.Overall)
{
Debug.LogError("Exit - Editor / Portrait Missmatch");
CloseDialog();
return;
}
//여기서 체크 및 실행하자
//Request => Process => Process 처리
if (_exportProcessType == EXPORT_TYPE.None && _exportRequestType != EXPORT_TYPE.None)
{
_iProcess = 0;
switch (_exportRequestType)
{
case EXPORT_TYPE.None:
break;
case EXPORT_TYPE.Thumbnail:
_exportProcessType = EXPORT_TYPE.Thumbnail;
break;
case EXPORT_TYPE.PNG:
_exportProcessType = EXPORT_TYPE.PNG;
break;
case EXPORT_TYPE.GIFAnimation:
_exportProcessType = EXPORT_TYPE.GIFAnimation;
break;
}
_exportRequestType = EXPORT_TYPE.None;
}
switch (_exportProcessType)
{
case EXPORT_TYPE.None:
break;
case EXPORT_TYPE.Thumbnail:
Process_MakeThumbnail();
break;
case EXPORT_TYPE.PNG:
Process_PNGScreenShot();
break;
case EXPORT_TYPE.GIFAnimation:
Process_MakeGIF();
break;
}
_scroll = EditorGUILayout.BeginScrollView(_scroll, false, true, GUILayout.Width(width), GUILayout.Height(height));
width -= 24;
EditorGUILayout.BeginVertical(GUILayout.Width(width));
int settingWidth = ((width - 10) / 3) - 4;
int settingWidth_Label = 50;
int settingWidth_Value = settingWidth - (50 + 8);
int settingHeight = 70;
EditorGUILayout.LabelField("Setting");
GUILayout.Space(5);
EditorGUILayout.BeginHorizontal(GUILayout.Width(width), GUILayout.Height(settingHeight));
GUILayout.Space(5);
//Position
//------------------------
EditorGUILayout.BeginVertical(GUILayout.Width(settingWidth), GUILayout.Height(settingHeight));
EditorGUILayout.LabelField("Position", GUILayout.Width(settingWidth));
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("X", GUILayout.Width(settingWidth_Label));
int posX = EditorGUILayout.DelayedIntField(_editor._captureFrame_PosX, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("Y", GUILayout.Width(settingWidth_Label));
int posY = EditorGUILayout.DelayedIntField(_editor._captureFrame_PosY, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
EditorGUILayout.EndVertical();
//------------------------
//Capture Size
//------------------------
EditorGUILayout.BeginVertical(GUILayout.Width(settingWidth), GUILayout.Height(settingHeight));
EditorGUILayout.LabelField("Capture Size", GUILayout.Width(settingWidth));
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("Width", GUILayout.Width(settingWidth_Label));
int srcSizeWidth = EditorGUILayout.DelayedIntField(_editor._captureFrame_SrcWidth, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("Height", GUILayout.Width(settingWidth_Label));
int srcSizeHeight = EditorGUILayout.DelayedIntField(_editor._captureFrame_SrcHeight, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
if (srcSizeWidth < 8)
{
srcSizeWidth = 8;
}
if (srcSizeHeight < 8)
{
srcSizeHeight = 8;
}
EditorGUILayout.EndVertical();
//------------------------
//File Size
//-------------------------------
EditorGUILayout.BeginVertical(GUILayout.Width(settingWidth), GUILayout.Height(settingHeight));
EditorGUILayout.LabelField("File Size", GUILayout.Width(settingWidth));
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("Width", GUILayout.Width(settingWidth_Label));
int dstSizeWidth = EditorGUILayout.DelayedIntField(_editor._captureFrame_DstWidth, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal(GUILayout.Width(settingWidth));
EditorGUILayout.LabelField("Height", GUILayout.Width(settingWidth_Label));
int dstSizeHeight = EditorGUILayout.DelayedIntField(_editor._captureFrame_DstHeight, GUILayout.Width(settingWidth_Value));
EditorGUILayout.EndHorizontal();
if (dstSizeWidth < 8)
{
dstSizeWidth = 8;
}
if (dstSizeHeight < 8)
{
dstSizeHeight = 8;
}
EditorGUILayout.EndVertical();
//-------------------------------
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal(GUILayout.Width(width), GUILayout.Height(30));
GUILayout.Space(5);
int setting2CompWidth = ((width - 10) / 2) - 8;
//Color와 AspectRatio
EditorGUILayout.LabelField("BG Color", GUILayout.Width(80));
Color prevCaptureColor = _editor._captureFrame_Color;
try
{
_editor._captureFrame_Color = EditorGUILayout.ColorField(_editor._captureFrame_Color, GUILayout.Width(setting2CompWidth - 86));
}
catch (Exception) { }
GUILayout.Space(30);
if (apEditorUtil.ToggledButton_2Side("Aspect Ratio Fixed", "Aspect Ratio Not Fixed", _editor._isCaptureAspectRatioFixed, true, setting2CompWidth - 20, 20))
{
_editor._isCaptureAspectRatioFixed = !_editor._isCaptureAspectRatioFixed;
if (_editor._isCaptureAspectRatioFixed)
{
//AspectRatio를 굳혔다.
//Dst계열 변수를 Src에 맞춘다.
//Height를 고정, Width를 맞춘다.
_editor._captureFrame_DstWidth = GetAspectRatio_Width(_editor._captureFrame_DstHeight, _editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight);
dstSizeWidth = _editor._captureFrame_DstWidth;
}
_editor.SaveEditorPref();
apEditorUtil.ReleaseGUIFocus();
}
EditorGUILayout.EndHorizontal();
//AspectRatio를 맞추어보자
if (_editor._isCaptureAspectRatioFixed)
{
if (srcSizeWidth != _editor._captureFrame_SrcWidth)
{
//Width가 바뀌었다. => Height를 맞추자
srcSizeHeight = GetAspectRatio_Height(srcSizeWidth, _editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight);
//>> Dst도 바꾸자 => Width
dstSizeWidth = GetAspectRatio_Width(dstSizeHeight, _editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight);
}
else if (srcSizeHeight != _editor._captureFrame_SrcHeight)
{
//Height가 바뀌었다. => Width를 맞추자
srcSizeWidth = GetAspectRatio_Width(srcSizeHeight, _editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight);
//>> Dst도 바꾸자 => Height
dstSizeHeight = GetAspectRatio_Height(dstSizeWidth, _editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight);
}
else if (dstSizeWidth != _editor._captureFrame_DstWidth)
{
//Width가 바뀌었다. => Height를 맞추자
dstSizeHeight = GetAspectRatio_Height(dstSizeWidth, _editor._captureFrame_DstWidth, _editor._captureFrame_DstHeight);
//>> Src도 바꾸다 => Width
srcSizeWidth = GetAspectRatio_Width(srcSizeHeight, _editor._captureFrame_DstWidth, _editor._captureFrame_DstHeight);
}
else if (dstSizeHeight != _editor._captureFrame_DstHeight)
{
//Height가 바뀌었다. => Width를 맞추자
dstSizeWidth = GetAspectRatio_Width(dstSizeHeight, _editor._captureFrame_DstWidth, _editor._captureFrame_DstHeight);
//>> Dst도 바꾸자 => Height
srcSizeHeight = GetAspectRatio_Height(srcSizeWidth, _editor._captureFrame_DstWidth, _editor._captureFrame_DstHeight);
}
}
if (posX != _editor._captureFrame_PosX ||
posY != _editor._captureFrame_PosY ||
srcSizeWidth != _editor._captureFrame_SrcWidth ||
srcSizeHeight != _editor._captureFrame_SrcHeight ||
dstSizeWidth != _editor._captureFrame_DstWidth ||
dstSizeHeight != _editor._captureFrame_DstHeight
)
{
_editor._captureFrame_PosX = posX;
_editor._captureFrame_PosY = posY;
_editor._captureFrame_SrcWidth = srcSizeWidth;
_editor._captureFrame_SrcHeight = srcSizeHeight;
_editor._captureFrame_DstWidth = dstSizeWidth;
_editor._captureFrame_DstHeight = dstSizeHeight;
_editor.SaveEditorPref();
apEditorUtil.ReleaseGUIFocus();
}
if (prevCaptureColor.r != _editor._captureFrame_Color.r ||
prevCaptureColor.g != _editor._captureFrame_Color.g ||
prevCaptureColor.b != _editor._captureFrame_Color.b)
{
_editor.SaveEditorPref();
//색상은 GUIFocus를 null로 만들면 안되기에..
}
GUILayout.Space(10);
apEditorUtil.GUI_DelimeterBoxH(width);
GUILayout.Space(10);
EditorGUILayout.LabelField("Thumbnail Capture");
GUILayout.Space(5);
EditorGUILayout.LabelField("File Path");
EditorGUILayout.BeginHorizontal(GUILayout.Width(width), GUILayout.Height(25));
GUILayout.Space(5);
GUILayout.Box(_editor._portrait._thumbnailImage, GUI.skin.label, GUILayout.Width(50), GUILayout.Height(25));
_editor._portrait._imageFilePath_Thumbnail = EditorGUILayout.TextField(_editor._portrait._imageFilePath_Thumbnail, GUILayout.Width(width - (130)));
if (GUILayout.Button("Change", GUILayout.Width(60)))
{
string fileName = EditorUtility.SaveFilePanelInProject("Thumbnail File Path", _editor._portrait.name + "_Thumb.png", "png", "Please Enter a file name to save Thumbnail to");
if (!string.IsNullOrEmpty(fileName))
{
_editor._portrait._imageFilePath_Thumbnail = fileName;
apEditorUtil.ReleaseGUIFocus();
}
}
EditorGUILayout.EndHorizontal();
if (GUILayout.Button("Make Thumbnail", GUILayout.Width(width), GUILayout.Height(30)))
{
if (string.IsNullOrEmpty(_editor._portrait._imageFilePath_Thumbnail))
{
//EditorUtility.DisplayDialog("Thumbnail Creating Failed", "File Name is Empty", "Close");
EditorUtility.DisplayDialog(_editor.GetText(apLocalization.TEXT.ThumbCreateFailed_Title),
_editor.GetText(apLocalization.TEXT.ThumbCreateFailed_Body_NoFile),
_editor.GetText(apLocalization.TEXT.Close)
);
}
else
{
RequestExport(EXPORT_TYPE.Thumbnail);
#region [비동기 스타일로 변경]
//int thumbnailWidth = 256;
//int thumbnailHeight = 128;
//float preferAspectRatio = (float)thumbnailWidth / (float)thumbnailHeight;
//float srcAspectRatio = (float)_editor._captureFrame_SrcWidth / (float)_editor._captureFrame_SrcHeight;
////긴쪽으로 캡쳐 크기를 맞춘다.
//int srcThumbWidth = _editor._captureFrame_SrcWidth;
//int srcThumbHeight = _editor._captureFrame_SrcHeight;
////AspectRatio = W / H
//if(srcAspectRatio < preferAspectRatio)
//{
// //가로가 더 길군요.
// //가로를 자릅시다.
// //H = W / AspectRatio;
// srcThumbHeight = (int)((srcThumbWidth / preferAspectRatio) + 0.5f);
//}
//else
//{
// //세로가 더 길군요.
// //세로를 자릅시다.
// //W = AspectRatio * H
// srcThumbWidth = (int)((srcThumbHeight * preferAspectRatio) + 0.5f);
//}
//Texture2D result = _editor.Exporter.RenderToTexture(_editor.Select.RootUnit._childMeshGroup,
// (int)(_editor._captureFrame_PosX + apGL.WindowSizeHalf.x), (int)(_editor._captureFrame_PosY + apGL.WindowSizeHalf.y),
// srcThumbWidth, srcThumbHeight,
// thumbnailWidth, thumbnailHeight,
// _editor._captureFrame_Color
// );
//if (result != null)
//{
// //이미지를 저장하자
// //이건 Asset으로 자동 저장
// string filePathWOExtension = _editor._portrait._imageFilePath_Thumbnail.Substring(0, _editor._portrait._imageFilePath_Thumbnail.Length - 4);
// bool isSaveSuccess = _editor.Exporter.SaveTexture2DToPNG(result, filePathWOExtension, true);
// if(isSaveSuccess)
// {
// AssetDatabase.Refresh();
// _editor._portrait._thumbnailImage = AssetDatabase.LoadAssetAtPath<Texture2D>(_editor._portrait._imageFilePath_Thumbnail);
// }
//}
#endregion
}
}
GUILayout.Space(10);
apEditorUtil.GUI_DelimeterBoxH(width);
GUILayout.Space(10);
//Screenshot을 찍자
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
EditorGUILayout.LabelField("Screenshot Capture");
GUILayout.Space(5);
if (GUILayout.Button("Take a Screenshot", GUILayout.Width(width), GUILayout.Height(30)))
{
RequestExport(EXPORT_TYPE.PNG);
}
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
GUILayout.Space(10);
apEditorUtil.GUI_DelimeterBoxH(width);
GUILayout.Space(10);
//GIF Animation을 만들자
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
EditorGUILayout.LabelField("GIF Animation");
GUILayout.Space(5);
apRootUnit curRootUnit = _editor.Select.RootUnit;
if (_curRootUnit != curRootUnit)
{
//AnimList 리셋
_animClips.Clear();
_curRootUnit = curRootUnit;
if (_curRootUnit != null)
{
for (int i = 0; i < _editor._portrait._animClips.Count; i++)
{
apAnimClip animClip = _editor._portrait._animClips[i];
if (animClip._targetMeshGroup == _curRootUnit._childMeshGroup)
{
_animClips.Add(animClip);
}
}
}
_selectedAnimClip = null;
}
if (curRootUnit == null)
{
_selectedAnimClip = null;
}
else
{
if (_selectedAnimClip != null && _animClips.Count > 0)
{
if (!_animClips.Contains(_selectedAnimClip))
{
_selectedAnimClip = null;
}
}
else
{
_selectedAnimClip = null;
}
}
string animName = "< Animation is not selected >";
Color animBGColor = new Color(1.0f, 0.7f, 0.7f, 1.0f);
if (_selectedAnimClip != null)
{
animName = _selectedAnimClip._name;
animBGColor = new Color(0.7f, 1.0f, 0.7f, 1.0f);
}
Color prevGUIColor = GUI.backgroundColor;
GUIStyle guiStyleBox = new GUIStyle(GUI.skin.box);
guiStyleBox.alignment = TextAnchor.MiddleCenter;
GUI.backgroundColor = animBGColor;
GUILayout.Box(animName, guiStyleBox, GUILayout.Width(width), GUILayout.Height(30));
GUI.backgroundColor = prevGUIColor;
GUILayout.Space(5);
int width_GIFSetting = (width - 32) / 2;
int gifQuality = 256 - _editor._captureFrame_GIFSampleQuality;
EditorGUILayout.BeginHorizontal(GUILayout.Width(width));
GUILayout.Space(5);
string strQuality = "";
if (gifQuality > 200)
{
strQuality = "Quality [ High ]";
}
else if (gifQuality > 120)
{
strQuality = "Quality [ Medium ]";
}
else
{
strQuality = "Quality [ Low ]";
}
EditorGUILayout.LabelField(strQuality, GUILayout.Width(width_GIFSetting));
GUILayout.Space(20);
EditorGUILayout.LabelField("Loop Count", GUILayout.Width(width_GIFSetting));
EditorGUILayout.EndHorizontal();
EditorGUILayout.BeginHorizontal(GUILayout.Width(width));
GUILayout.Space(5);
//10 ~ 256
//246 ~ 0
gifQuality = EditorGUILayout.IntSlider(gifQuality, 0, 246, GUILayout.Width(width_GIFSetting));
gifQuality = 256 - gifQuality;
if (_editor._captureFrame_GIFSampleQuality != gifQuality)
{
_editor._captureFrame_GIFSampleQuality = gifQuality;
_editor.SaveEditorPref();
}
GUILayout.Space(20);
int loopCount = EditorGUILayout.DelayedIntField(_editor._captureFrame_GIFSampleLoopCount, GUILayout.Width(width_GIFSetting));
if (loopCount != _editor._captureFrame_GIFSampleLoopCount)
{
loopCount = Mathf.Clamp(loopCount, 1, 10);
_editor._captureFrame_GIFSampleLoopCount = loopCount;
_editor.SaveEditorPref();
}
EditorGUILayout.EndHorizontal();
//GUILayout.Space(10);
//Rect lastRect_Progress = GUILayoutUtility.GetLastRect();
//Rect barRect = new Rect(lastRect_Progress.x + 5, lastRect_Progress.y + 10, width - 5, 16);
//float barRatio = 0.0f;
//string strProcessName = "";
//if(_exportProcessType == EXPORT_TYPE.GIFAnimation)
//{
// barRatio = Mathf.Clamp01((float)_exportProcessX100 / 100.0f);
// strProcessName = "Exporting.. [ " + _exportProcessX100 + "% ]";
//}
////EditorGUI.ProgressBar(barRect, barRatio, "Convert PSD Data To Editor..");
//EditorGUI.ProgressBar(barRect, barRatio, strProcessName);
//GUILayout.Space(20);
if (apEditorUtil.ToggledButton_2Side("Take a GIF Animation", "Take a GIF Animation", false, (_selectedAnimClip != null), width, 30))
{
//RequestExport(EXPORT_TYPE.GIFAnimation);//리퀘스트 안할래..
string defFileName = "GIF_" + DateTime.Now.Year + "" + DateTime.Now.Month + "" + DateTime.Now.Day + "_" + DateTime.Now.Hour + "" + DateTime.Now.Minute + "" + DateTime.Now.Second + ".gif";
string saveFilePath = EditorUtility.SaveFilePanel("Save GIF Animation", _prevFilePath_Directory, defFileName, "gif");
if (!string.IsNullOrEmpty(saveFilePath))
{
bool result = _editor.Exporter.MakeGIFAnimation(saveFilePath,
_editor.Select.RootUnit._childMeshGroup,
_selectedAnimClip, _editor._captureFrame_GIFSampleLoopCount,
(int)(_editor._captureFrame_PosX + apGL.WindowSizeHalf.x), (int)(_editor._captureFrame_PosY + apGL.WindowSizeHalf.y),
_editor._captureFrame_SrcWidth, _editor._captureFrame_SrcHeight,
_editor._captureFrame_DstWidth, _editor._captureFrame_DstHeight,
_editor._captureFrame_Color,
_editor._captureFrame_GIFSampleQuality
);
if (result)
{
System.IO.FileInfo fi = new System.IO.FileInfo(saveFilePath);
Application.OpenURL("file://" + fi.Directory.FullName);
Application.OpenURL("file://" + saveFilePath);
_prevFilePath = _editor.Exporter.GIF_FilePath;
_prevFilePath_Directory = fi.Directory.FullName;
}
}
}
GUILayout.Space(10);
GUIStyle guiStyle = new GUIStyle(GUIStyle.none);
guiStyle.normal.textColor = GUI.skin.label.normal.textColor;
GUILayout.Button("Animation Clips", guiStyle, GUILayout.Width(width), GUILayout.Height(20)); //투명 버튼
//애니메이션 클립 리스트를 만들어야 한다.
if (_animClips.Count > 0)
{
Texture2D iconImage = _editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Animation);
apAnimClip nextSelectedAnimClip = null;
for (int i = 0; i < _animClips.Count; i++)
{
apAnimClip animClip = _animClips[i];
if (animClip == _selectedAnimClip)
{
Rect lastRect = GUILayoutUtility.GetLastRect();
prevCaptureColor = GUI.backgroundColor;
GUI.backgroundColor = new Color(0.4f, 0.8f, 1.0f, 1.0f);
GUI.Box(new Rect(lastRect.x, lastRect.y + 20, width, 20), "");
GUI.backgroundColor = prevGUIColor;
}
EditorGUILayout.BeginHorizontal(GUILayout.Width(width - 50));
GUILayout.Space(15);
if (GUILayout.Button(new GUIContent(" " + animClip._name, iconImage), guiStyle, GUILayout.Width(width - 35), GUILayout.Height(20)))
{
nextSelectedAnimClip = animClip;
}
EditorGUILayout.EndHorizontal();
}
if (nextSelectedAnimClip != null)
{
for (int i = 0; i < _editor._portrait._animClips.Count; i++)
{
_editor._portrait._animClips[i]._isSelectedInEditor = false;
}
nextSelectedAnimClip.LinkEditor(_editor._portrait);
nextSelectedAnimClip.RefreshTimelines();
nextSelectedAnimClip.SetFrame_Editor(nextSelectedAnimClip.StartFrame);
nextSelectedAnimClip.Pause_Editor();
nextSelectedAnimClip._isSelectedInEditor = true;
_selectedAnimClip = nextSelectedAnimClip;
_editor._portrait._animPlayManager.SetAnimClip_Editor(_selectedAnimClip);
}
}
EditorGUILayout.EndVertical();
GUILayout.Space(500);
EditorGUILayout.EndScrollView();
//-----------------------------------------------------------------------------------------------------------------------
//-----------------------------------------------------------------------------------------------------------------------
}
// Functions
//---------------------------------------------
public void ResetAllUnits()
{
_isNeedReset = false;
_units_All.Clear();
_units_Root.Clear();
//메인 루트들을 만들어주자
//_rootUnit_Overall = AddUnit_OnlyButton(null, "Portrait", CATEGORY.Overall_Name, null, true, null);
_rootUnit_Overall = AddUnit_Label(null, Editor.GetUIWord(UIWORD.RootUnits), CATEGORY.Overall_Name, null, true, null);
_rootUnit_Image = AddUnit_Label(null, Editor.GetUIWord(UIWORD.Images), CATEGORY.Images_Name, null, true, null);
_rootUnit_Mesh = AddUnit_Label(null, Editor.GetUIWord(UIWORD.Meshes), CATEGORY.Mesh_Name, null, true, null);
_rootUnit_MeshGroup = AddUnit_Label(null, Editor.GetUIWord(UIWORD.MeshGroups), CATEGORY.MeshGroup_Name, null, true, null);
//_rootUnit_Face = AddUnit_Label(null, "Faces", CATEGORY.Face_Name, null, true, null);
_rootUnit_Animation = AddUnit_Label(null, Editor.GetUIWord(UIWORD.AnimationClips), CATEGORY.Animation_Name, null, true, null);
_rootUnit_Param = AddUnit_Label(null, Editor.GetUIWord(UIWORD.ControlParameters), CATEGORY.Param_Name, null, true, null);
if (Editor == null || Editor._portrait == null)
{
return;
}
List <apRootUnit> rootUnits = Editor._portrait._rootUnits;
for (int i = 0; i < rootUnits.Count; i++)
{
apRootUnit rootUnit = rootUnits[i];
AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Root), "Root Unit " + i, CATEGORY.Overall_Item, rootUnit, false, _rootUnit_Overall);
}
//1. 이미지 파일들을 검색하자
List <apTextureData> textures = Editor._portrait._textureData;
for (int i = 0; i < textures.Count; i++)
{
apTextureData textureData = textures[i];
AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Image), textureData._name, CATEGORY.Images_Item, textureData, false, _rootUnit_Image);
}
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Add), Editor.GetUIWord(UIWORD.AddImage), CATEGORY.Images_Add, null, false, _rootUnit_Image);
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_AddPSD), Editor.GetUIWord(UIWORD.ImportPSDFile), CATEGORY.Images_AddPSD, null, false, _rootUnit_Image); //추가 : PSD
//2. 메시 들을 검색하자
List <apMesh> meshes = Editor._portrait._meshes;
for (int i = 0; i < meshes.Count; i++)
{
apMesh mesh = meshes[i];
AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Mesh), mesh._name, CATEGORY.Mesh_Item, mesh, false, _rootUnit_Mesh);
}
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Add), Editor.GetUIWord(UIWORD.AddMesh), CATEGORY.Mesh_Add, null, false, _rootUnit_Mesh);
//3. 메시 그룹들을 검색하자
//메시 그룹들은 하위에 또다른 Mesh Group을 가지고 있다.
List <apMeshGroup> meshGroups = Editor._portrait._meshGroups;
for (int i = 0; i < meshGroups.Count; i++)
{
apMeshGroup meshGroup = meshGroups[i];
if (meshGroup._parentMeshGroup == null || meshGroup._parentMeshGroupID < 0)
{
//Debug.Log("Reset H : MeshGroup(" + meshGroup._name + ") - Root");
apEditorHierarchyUnit addedHierarchyUnit = AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_MeshGroup), meshGroup._name, CATEGORY.MeshGroup_Item, meshGroup, false, _rootUnit_MeshGroup);
if (meshGroup._childMeshGroupTransforms.Count > 0)
{
AddUnit_SubMeshGroup(meshGroup, addedHierarchyUnit);
}
}
else
{
//Debug.Log("Reset H : MeshGroup(" + meshGroup._name + ") - Child");
}
}
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Add), Editor.GetUIWord(UIWORD.AddMeshGroup), CATEGORY.MeshGroup_Add, null, false, _rootUnit_MeshGroup);
//7. 파라미터들을 검색하자
List <apControlParam> cParams = Editor.ParamControl._controlParams;
for (int i = 0; i < cParams.Count; i++)
{
apControlParam cParam = cParams[i];
AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Param),
cParam._keyName,
CATEGORY.Param_Item,
cParam,
false,
_rootUnit_Param);
}
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Add), Editor.GetUIWord(UIWORD.AddControlParameter), CATEGORY.Param_Add, null, false, _rootUnit_Param);
//8. 애니메이션을 넣자
List <apAnimClip> animClips = Editor._portrait._animClips;
for (int i = 0; i < animClips.Count; i++)
{
apAnimClip animClip = animClips[i];
AddUnit_ToggleButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Animation),
animClip._name,
CATEGORY.Animation_Item,
animClip,
false,
_rootUnit_Animation);
}
AddUnit_OnlyButton(Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Add), Editor.GetUIWord(UIWORD.AddAnimationClip), CATEGORY.Animation_Add, null, false, _rootUnit_Animation);
}
// Click Event
//-----------------------------------------------------------------------------------------
public void OnUnitClick(apEditorHierarchyUnit eventUnit, int savedKey, object savedObj)
{
if (Editor == null)
{
return;
}
apEditorHierarchyUnit selectedUnit = null;
//여기서 이벤트를 설정해주자
CATEGORY category = (CATEGORY)savedKey;
//Debug.Log("Unit Select : " + category);
switch (category)
{
case CATEGORY.Overall_Name:
case CATEGORY.Images_Name:
case CATEGORY.Mesh_Name:
case CATEGORY.MeshGroup_Name:
//case CATEGORY.Face_Name:
case CATEGORY.Animation_Name:
case CATEGORY.Param_Name:
break;
case CATEGORY.Overall_Item:
//전체 선택
apRootUnit rootUnit = savedObj as apRootUnit;
if (rootUnit != null)
{
Editor.Select.SetOverall(rootUnit);
if (Editor.Select.RootUnit == rootUnit)
{
selectedUnit = eventUnit;
}
}
break;
case CATEGORY.Images_Item:
{
apTextureData textureData = savedObj as apTextureData;
if (textureData != null)
{
Editor.Select.SetImage(textureData); //<< 선택하자
if (Editor.Select.TextureData == textureData)
{
selectedUnit = eventUnit;
}
}
}
break;
case CATEGORY.Images_Add:
Editor.Controller.AddImage();
break;
case CATEGORY.Images_AddPSD: //추가 : PSD 로드
Editor.Controller.ShowPSDLoadDialog();
break;
case CATEGORY.Mesh_Item:
{
apMesh mesh = savedObj as apMesh;
if (mesh != null)
{
Editor.Select.SetMesh(mesh); //<< 선택하자
if (Editor.Select.Mesh == mesh)
{
selectedUnit = eventUnit;
}
}
}
break;
case CATEGORY.Mesh_Add:
Editor.Controller.AddMesh();
break;
case CATEGORY.MeshGroup_Item:
{
apMeshGroup meshGroup = savedObj as apMeshGroup;
if (meshGroup != null)
{
Editor.Select.SetMeshGroup(meshGroup);
if (Editor.Select.MeshGroup == meshGroup)
{
selectedUnit = eventUnit;
}
}
}
break;
case CATEGORY.MeshGroup_Add:
Editor.Controller.AddMeshGroup();
break;
//case CATEGORY.Face_Item:
// break;
//case CATEGORY.Face_Add:
// break;
case CATEGORY.Animation_Item:
{
apAnimClip animClip = savedObj as apAnimClip;
if (animClip != null)
{
Editor.Select.SetAnimClip(animClip);
if (Editor.Select.AnimClip == animClip)
{
selectedUnit = eventUnit;
}
}
}
break;
case CATEGORY.Animation_Add:
{
//데모 기능 제한
//Param 개수는 2개로 제한되며, 이걸 넘어가면 추가할 수 없다.
if (apVersion.I.IsDemo)
{
if (Editor._portrait._animClips.Count >= 2)
{
//이미 2개를 넘었다.
EditorUtility.DisplayDialog(
Editor.GetText(TEXT.DemoLimitation_Title),
Editor.GetText(TEXT.DemoLimitation_Body_AddAnimation),
Editor.GetText(TEXT.Okay)
);
break;
}
}
Editor.Controller.AddAnimClip();
}
break;
case CATEGORY.Param_Item:
{
apControlParam cParam = savedObj as apControlParam;
if (cParam != null)
{
Editor.Select.SetParam(cParam);
if (Editor.Select.Param == cParam)
{
selectedUnit = eventUnit;
}
}
}
break;
case CATEGORY.Param_Add:
{
//데모 기능 제한
//Param 개수는 2개로 제한되며, 이걸 넘어가면 추가할 수 없다.
if (apVersion.I.IsDemo)
{
if (Editor.ParamControl._controlParams.Count >= 2)
{
//이미 2개를 넘었다.
EditorUtility.DisplayDialog(
Editor.GetText(TEXT.DemoLimitation_Title),
Editor.GetText(TEXT.DemoLimitation_Body_AddParam),
Editor.GetText(TEXT.Okay)
);
break;
}
}
//Param 추가
Editor.Controller.AddParam();
}
break;
}
if (selectedUnit != null)
{
for (int i = 0; i < _units_All.Count; i++)
{
if (_units_All[i] == selectedUnit)
{
//_units_All[i]._isSelected = true;
_units_All[i].SetSelected(true);
}
else
{
//_units_All[i]._isSelected = false;
_units_All[i].SetSelected(false);
}
}
}
else
{
for (int i = 0; i < _units_All.Count; i++)
{
//_units_All[i]._isSelected = false;
_units_All[i].SetSelected(false);
}
}
}
// Refresh (without Reset)
//-----------------------------------------------------------------------------------------
public void RefreshUnits()
{
if (Editor == null || Editor._portrait == null || _isNeedReset)
{
ResetAllUnits();
return;
}
List <apEditorHierarchyUnit> deletedUnits = new List <apEditorHierarchyUnit>();
//0. 루트 유닛들을 검색하자
List <apRootUnit> rootUnits = Editor._portrait._rootUnits;
for (int i = 0; i < rootUnits.Count; i++)
{
apRootUnit rootUnit = Editor._portrait._rootUnits[i];
RefreshUnit(CATEGORY.Overall_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Root),
rootUnit,
"Root Unit " + i,
Editor.Select.RootUnit,
_rootUnit_Overall);
}
CheckRemovableUnits <apRootUnit>(deletedUnits, CATEGORY.Overall_Item, rootUnits);
//1. 이미지 파일들을 검색하자 -> 있는건 없애고, 없는건 만들자
List <apTextureData> textures = Editor._portrait._textureData;
for (int i = 0; i < textures.Count; i++)
{
apTextureData textureData = textures[i];
RefreshUnit(CATEGORY.Images_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Image),
textureData,
textureData._name,
Editor.Select.TextureData,
_rootUnit_Image);
}
CheckRemovableUnits <apTextureData>(deletedUnits, CATEGORY.Images_Item, textures);
//2. 메시 들을 검색하자
List <apMesh> meshes = Editor._portrait._meshes;
for (int i = 0; i < meshes.Count; i++)
{
apMesh mesh = meshes[i];
RefreshUnit(CATEGORY.Mesh_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Mesh),
mesh,
mesh._name,
Editor.Select.Mesh,
_rootUnit_Mesh);
}
CheckRemovableUnits <apMesh>(deletedUnits, CATEGORY.Mesh_Item, meshes);
//3. Mesh Group들을 검색하자
List <apMeshGroup> meshGroups = Editor._portrait._meshGroups;
for (int i = 0; i < meshGroups.Count; i++)
{
//이건 재귀 함수 -_-;
if (meshGroups[i]._parentMeshGroup == null)
{
RefreshUnit_MeshGroup(meshGroups[i], _rootUnit_MeshGroup);
}
}
CheckRemovableUnits <apMeshGroup>(deletedUnits, CATEGORY.MeshGroup_Item, meshGroups);
//7. 파라미터들을 검색하자
List <apControlParam> cParams = Editor.ParamControl._controlParams;
for (int i = 0; i < cParams.Count; i++)
{
apControlParam cParam = cParams[i];
RefreshUnit(CATEGORY.Param_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Param),
cParam,
cParam._keyName,
Editor.Select.Param,
_rootUnit_Param);
CheckRemovableUnits <apControlParam>(deletedUnits, CATEGORY.Param_Item, cParams);
}
//8. 애니메이션을 넣자
List <apAnimClip> animClips = Editor._portrait._animClips;
for (int i = 0; i < animClips.Count; i++)
{
apAnimClip animClip = animClips[i];
RefreshUnit(CATEGORY.Animation_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Animation),
animClip,
animClip._name,
Editor.Select.AnimClip,
_rootUnit_Animation);
CheckRemovableUnits <apAnimClip>(deletedUnits, CATEGORY.Animation_Item, animClips);
}
//삭제할 유닛을 체크하고 계산하자
for (int i = 0; i < deletedUnits.Count; i++)
{
//1. 먼저 All에서 없앤다.
//2. Parent가 있는경우, Parent에서 없애달라고 한다.
apEditorHierarchyUnit dUnit = deletedUnits[i];
if (dUnit._parentUnit != null)
{
dUnit._parentUnit._childUnits.Remove(dUnit);
}
_units_All.Remove(dUnit);
}
//전체 Sort를 한다.
//재귀적으로 실행
for (int i = 0; i < _units_Root.Count; i++)
{
SortUnit_Recv(_units_Root[i]);
}
}
// Refresh (without Reset)
//-----------------------------------------------------------------------------------------
public void RefreshUnits()
{
if (Editor == null || Editor._portrait == null || _isNeedReset)
{
ResetAllUnits();
return;
}
ReloadGUIContent();
List <apEditorHierarchyUnit> deletedUnits = new List <apEditorHierarchyUnit>();
//0. 루트 유닛들을 검색하자
//이전
//List<apRootUnit> rootUnits = Editor._portrait._rootUnits;
//변경
List <apObjectOrders.OrderSet> rootUnitSets = Editor._portrait._objectOrders.RootUnits;
for (int i = 0; i < rootUnitSets.Count; i++)
{
//이전
//apRootUnit rootUnit = Editor._portrait._rootUnits[i];
//변경
apRootUnit rootUnit = rootUnitSets[i]._linked_RootUnit;
RefreshUnit(CATEGORY.Overall_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Root),
rootUnit,
"Root Unit " + i + " (" + rootUnit.Name + ")", //<<변경
Editor.Select.RootUnit,
_rootUnit_Overall,
i);
}
//이전
//CheckRemovableUnits<apRootUnit>(deletedUnits, CATEGORY.Overall_Item, rootUnits);
//변경
CheckRemovableUnits <apRootUnit>(deletedUnits, CATEGORY.Overall_Item, Editor._portrait._rootUnits);
//1. 이미지 파일들을 검색하자 -> 있는건 없애고, 없는건 만들자
//이전
//List<apTextureData> textures = Editor._portrait._textureData;
//변경
List <apObjectOrders.OrderSet> textureSets = Editor._portrait._objectOrders.Images;
for (int i = 0; i < textureSets.Count; i++)
{
//이전
//apTextureData textureData = textures[i];
//변경
apTextureData textureData = textureSets[i]._linked_Image;
RefreshUnit(CATEGORY.Images_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Image),
textureData,
textureData._name,
Editor.Select.TextureData,
_rootUnit_Image,
i);
}
//이전
//CheckRemovableUnits<apTextureData>(deletedUnits, CATEGORY.Images_Item, textures);
//변경
CheckRemovableUnits <apTextureData>(deletedUnits, CATEGORY.Images_Item, Editor._portrait._textureData);
//2. 메시 들을 검색하자
//이전
//List<apMesh> meshes = Editor._portrait._meshes;
//변경
List <apObjectOrders.OrderSet> mesheSets = Editor._portrait._objectOrders.Meshes;
for (int i = 0; i < mesheSets.Count; i++)
{
//이전
//apMesh mesh = meshes[i];
//변경
apMesh mesh = mesheSets[i]._linked_Mesh;
RefreshUnit(CATEGORY.Mesh_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Mesh),
mesh,
mesh._name,
Editor.Select.Mesh,
_rootUnit_Mesh,
i);
}
//이전
//CheckRemovableUnits<apMesh>(deletedUnits, CATEGORY.Mesh_Item, meshes);
//변경
CheckRemovableUnits <apMesh>(deletedUnits, CATEGORY.Mesh_Item, Editor._portrait._meshes);
//3. Mesh Group들을 검색하자
//이전
//List<apMeshGroup> meshGroups = Editor._portrait._meshGroups;
//변경
List <apObjectOrders.OrderSet> meshGroupSets = Editor._portrait._objectOrders.MeshGroups;
for (int i = 0; i < meshGroupSets.Count; i++)
{
//이건 재귀 함수 -_-;
apMeshGroup meshGroup = meshGroupSets[i]._linked_MeshGroup;
if (meshGroup._parentMeshGroup == null)
{
RefreshUnit_MeshGroup(meshGroup, _rootUnit_MeshGroup, i);
}
}
//이전
//CheckRemovableUnits<apMeshGroup>(deletedUnits, CATEGORY.MeshGroup_Item, meshGroups);
//변경
CheckRemovableUnits <apMeshGroup>(deletedUnits, CATEGORY.MeshGroup_Item, Editor._portrait._meshGroups);
//7. 파라미터들을 검색하자
//이전
//List<apControlParam> cParams = Editor.ParamControl._controlParams;
//변경
List <apObjectOrders.OrderSet> cParamSets = Editor._portrait._objectOrders.ControlParams;
for (int i = 0; i < cParamSets.Count; i++)
{
//이전
//apControlParam cParam = cParams[i];
//변경
apControlParam cParam = cParamSets[i]._linked_ControlParam;
RefreshUnit(CATEGORY.Param_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Param),
cParam,
cParam._keyName,
Editor.Select.Param,
_rootUnit_Param,
i);
}
//이전
//CheckRemovableUnits<apControlParam>(deletedUnits, CATEGORY.Param_Item, cParams);
//변경
CheckRemovableUnits <apControlParam>(deletedUnits, CATEGORY.Param_Item, Editor.ParamControl._controlParams);
//8. 애니메이션을 넣자
//이전
//List<apAnimClip> animClips = Editor._portrait._animClips;
List <apObjectOrders.OrderSet> animClipSets = Editor._portrait._objectOrders.AnimClips;
for (int i = 0; i < animClipSets.Count; i++)
{
//이전
//apAnimClip animClip = animClips[i];
//변경
apAnimClip animClip = animClipSets[i]._linked_AnimClip;
RefreshUnit(CATEGORY.Animation_Item,
Editor.ImageSet.Get(apImageSet.PRESET.Hierarchy_Animation),
animClip,
animClip._name,
Editor.Select.AnimClip,
_rootUnit_Animation,
i);
}
//이전
//CheckRemovableUnits<apAnimClip>(deletedUnits, CATEGORY.Animation_Item, animClips);
//변경
CheckRemovableUnits <apAnimClip>(deletedUnits, CATEGORY.Animation_Item, Editor._portrait._animClips);
//삭제할 유닛을 체크하고 계산하자
for (int i = 0; i < deletedUnits.Count; i++)
{
//1. 먼저 All에서 없앤다.
//2. Parent가 있는경우, Parent에서 없애달라고 한다.
apEditorHierarchyUnit dUnit = deletedUnits[i];
if (dUnit._parentUnit != null)
{
dUnit._parentUnit._childUnits.Remove(dUnit);
}
_units_All.Remove(dUnit);
}
//전체 Sort를 한다.
//재귀적으로 실행
for (int i = 0; i < _units_Root.Count; i++)
{
SortUnit_Recv(_units_Root[i]);
}
}
public void OnUnitClickOrderChanged(apEditorHierarchyUnit eventUnit, int savedKey, object savedObj, bool isOrderUp)
{
//Hierarchy의 항목 순서를 바꾸자
if (Editor == null || Editor._portrait == null)
{
return;
}
apObjectOrders orders = Editor._portrait._objectOrders;
bool isChanged = false;
bool isResult = false;
CATEGORY category = (CATEGORY)savedKey;
switch (category)
{
case CATEGORY.Overall_Item:
{
apRootUnit rootUnit = savedObj as apRootUnit;
if (rootUnit != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.RootUnit, rootUnit._childMeshGroup._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
case CATEGORY.Images_Item:
{
apTextureData textureData = savedObj as apTextureData;
if (textureData != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.Image, textureData._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
case CATEGORY.Mesh_Item:
{
apMesh mesh = savedObj as apMesh;
if (mesh != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.Mesh, mesh._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
case CATEGORY.MeshGroup_Item:
{
apMeshGroup meshGroup = savedObj as apMeshGroup;
if (meshGroup != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.MeshGroup, meshGroup._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
case CATEGORY.Animation_Item:
{
apAnimClip animClip = savedObj as apAnimClip;
if (animClip != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.AnimClip, animClip._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
case CATEGORY.Param_Item:
{
apControlParam cParam = savedObj as apControlParam;
if (cParam != null)
{
isResult = orders.ChangeOrder(Editor._portrait, apObjectOrders.OBJECT_TYPE.ControlParam, cParam._uniqueID, isOrderUp);
if (isResult)
{
isChanged = true;
}
}
}
break;
}
if (isChanged)
{
apEditorUtil.SetEditorDirty();
Editor.RefreshControllerAndHierarchy(false);
}
}
public void SetRootUnit(apRootUnit rootUnit, int regOrder)
{
SetData(OBJECT_TYPE.RootUnit, rootUnit._childMeshGroup._uniqueID, regOrder);
_linked_RootUnit = rootUnit;
}
// Change Order
//------------------------------------------------------------
public bool ChangeOrder(apPortrait portrait, OBJECT_TYPE objectType, int ID, bool isOrderUp)
{
//Debug.Log("ChangeOrder : " + objectType + " / " + ID + " / Up : " + isOrderUp);
//1. 타겟이 있는지 확인
List <OrderSet> orderSets = _orderSets[objectType];
OrderSet target = orderSets.Find(delegate(OrderSet a)
{
return(a._ID == ID);
});
if (target == null)
{
return(false);
}
if (objectType == OBJECT_TYPE.MeshGroup)
{
//MeshGroup이 없거나 자식 MeshGroup이면 순서를 바꿀 수 없다.
if (target._linked_MeshGroup == null)
{
return(false);
}
if (target._linked_MeshGroup._parentMeshGroup != null)
{
return(false);
}
}
//Order Up : order 값이 1 줄어든다.
//Order Down : order 값이 1 증가한다.
//자리가 바뀔 대상을 찾는다.
//단, MeshGroup은 Parent가 없는 것들이어야 한다.
int prevOrder = target._customOrder;
int nextOrder = isOrderUp ? (prevOrder - 1) : (prevOrder + 1);
OrderSet switchTarget = null;
if (objectType == OBJECT_TYPE.MeshGroup)
{
switchTarget = orderSets.Find(delegate(OrderSet a)
{
if (a._linked_MeshGroup == null)
{
return(false);
}
if (a._linked_MeshGroup._parentMeshGroup != null)
{
return(false);
}
//MeshGroup이 null이거나 하위 MeshGroup이면 패스
return(a._customOrder == nextOrder && a != target);
});
}
else
{
switchTarget = orderSets.Find(delegate(OrderSet a)
{
return(a._customOrder == nextOrder && a != target);
});
}
if (switchTarget != null)
{
//서로의 Order 값을 바꾼다.
switchTarget._customOrder = prevOrder;
target._customOrder = nextOrder;
//Debug.Log("자리 바꾸기 : " + target.Name + " <-> " + switchTarget.Name);
SortByCustom();
//만약 RootUnit의 경우라면, Portrait에서의 RootUnit 인덱스를 교환할 필요도 있다.
if (objectType == OBJECT_TYPE.RootUnit)
{
portrait._mainMeshGroupIDList.Clear();
portrait._rootUnits.Clear();
for (int i = 0; i < orderSets.Count; i++)
{
apRootUnit rootUnit = orderSets[i]._linked_RootUnit;
portrait._mainMeshGroupIDList.Add(rootUnit._childMeshGroup._uniqueID);
portrait._rootUnits.Add(rootUnit);
}
}
return(true);
}
//else
//{
// Debug.LogError("자리 바꾸기 실패 : " + target.Name);
//}
return(false);
}
// Functions
//----------------------------------------------------
public void Sync(apPortrait portrait)
{
//Debug.Log("Sync : " + portrait.name);
List <apRootUnit> rootUnits = portrait._rootUnits;
List <apTextureData> images = portrait._textureData;
List <apMesh> meshes = portrait._meshes;
List <apMeshGroup> meshGroups = portrait._meshGroups;
List <apAnimClip> animClips = portrait._animClips;
List <apControlParam> controlParams = portrait._controller._controlParams;
//일단 모두 초기화
foreach (KeyValuePair <OBJECT_TYPE, List <OrderSet> > subOrderSet in _orderSets)
{
List <OrderSet> orderSets = subOrderSet.Value;
for (int i = 0; i < orderSets.Count; i++)
{
orderSets[i]._isExist = false; //<<플래그를 세운다. (응?)
}
}
OrderSet existOrderSet = null;
List <OrderSet> newOrderSets = new List <OrderSet>();
//1. Root Unit
apRootUnit curRootUnit = null;
for (int i = 0; i < rootUnits.Count; i++)
{
curRootUnit = rootUnits[i];
if (curRootUnit == null || curRootUnit._childMeshGroup == null)
{
continue;
}
existOrderSet = _orderSets_RootUnit.Find(delegate(OrderSet a)
{
return(a._ID == curRootUnit._childMeshGroup._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_RootUnit = curRootUnit;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetRootUnit(curRootUnit, i);
newOrderSets.Add(newOrderSet);
}
}
//2. Images
apTextureData curImage = null;
for (int i = 0; i < images.Count; i++)
{
curImage = images[i];
if (curImage == null)
{
continue;
}
existOrderSet = _orderSets_Image.Find(delegate(OrderSet a)
{
return(a._ID == curImage._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_Image = curImage;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetImage(curImage, i);
newOrderSets.Add(newOrderSet);
}
}
//3. Meshes
apMesh curMesh = null;
for (int i = 0; i < meshes.Count; i++)
{
curMesh = meshes[i];
if (curMesh == null)
{
continue;
}
existOrderSet = _orderSets_Mesh.Find(delegate(OrderSet a)
{
return(a._ID == curMesh._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_Mesh = curMesh;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetMesh(curMesh, i);
newOrderSets.Add(newOrderSet);
}
}
//4. MeshGroup
apMeshGroup curMeshGroup = null;
for (int i = 0; i < meshGroups.Count; i++)
{
curMeshGroup = meshGroups[i];
if (curMeshGroup == null)
{
continue;
}
//자식 MeshGroup인 경우 처리하지 않는다.
if (curMeshGroup._parentMeshGroup != null)
{
continue;
}
existOrderSet = _orderSets_MeshGroup.Find(delegate(OrderSet a)
{
return(a._ID == curMeshGroup._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_MeshGroup = curMeshGroup;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetMeshGroup(curMeshGroup, i);
newOrderSets.Add(newOrderSet);
}
}
//5. AnimClip
apAnimClip curAnimClip = null;
for (int i = 0; i < animClips.Count; i++)
{
curAnimClip = animClips[i];
if (curAnimClip == null)
{
continue;
}
existOrderSet = _orderSets_AnimClip.Find(delegate(OrderSet a)
{
return(a._ID == curAnimClip._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_AnimClip = curAnimClip;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetAnimClip(curAnimClip, i);
newOrderSets.Add(newOrderSet);
}
}
//6. Control Param
apControlParam curControlParam = null;
for (int i = 0; i < controlParams.Count; i++)
{
curControlParam = controlParams[i];
if (curControlParam == null)
{
continue;
}
existOrderSet = _orderSets_ControlParam.Find(delegate(OrderSet a)
{
return(a._ID == curControlParam._uniqueID);
});
if (existOrderSet != null)
{
//이미 등록된 OrderSet이다.
existOrderSet._isExist = true;
existOrderSet._regOrder = i;
existOrderSet._linked_ControlParam = curControlParam;
}
else
{
//아직 등록되지 않은 OrderSet이다.
OrderSet newOrderSet = new OrderSet();
newOrderSet.SetControlParam(curControlParam, i);
newOrderSets.Add(newOrderSet);
}
}
bool isAnyChanged = false;
// 연결이 안된 OrderSet 을 삭제
foreach (KeyValuePair <OBJECT_TYPE, List <OrderSet> > subOrderSet in _orderSets)
{
List <OrderSet> orderSets = subOrderSet.Value;
int nRemoved = orderSets.RemoveAll(delegate(OrderSet a)
{
return(!a._isExist);
});
if (nRemoved > 0)
{
isAnyChanged = true;
}
}
//새로 추가될 OrderSet을 추가한다. 이때, Order를 잘 체크하자
if (newOrderSets.Count > 0)
{
isAnyChanged = true;
OrderSet newOrderSet = null;
List <OrderSet> targetList = null;
for (int i = 0; i < newOrderSets.Count; i++)
{
newOrderSet = newOrderSets[i];
targetList = _orderSets[newOrderSet._objectType];
newOrderSet.SetOrder(targetList.Count); //리스트의 크기만큼의 Order값을 넣자
targetList.Add(newOrderSet); //<<리스트에 추가!
}
}
if (isAnyChanged)
{
//Sort를 하고 CustomOrder를 작성하자
foreach (KeyValuePair <OBJECT_TYPE, List <OrderSet> > subOrderSet in _orderSets)
{
List <OrderSet> orderSets = subOrderSet.Value;
orderSets.Sort(delegate(OrderSet a, OrderSet b)
{
return(a._customOrder - b._customOrder); //오름차순
});
for (int i = 0; i < orderSets.Count; i++)
{
orderSets[i]._customOrder = i;
}
}
}
//Debug.Log("Root Units : " + _orderSets[OBJECT_TYPE.RootUnit].Count);
//Debug.Log("Images : " + _orderSets[OBJECT_TYPE.Image].Count);
//Debug.Log("Meshes : " + _orderSets[OBJECT_TYPE.Mesh].Count);
//Debug.Log("Mesh Groups : " + _orderSets[OBJECT_TYPE.MeshGroup].Count);
//Debug.Log("AnimClips : " + _orderSets[OBJECT_TYPE.AnimClip].Count);
//Debug.Log("Control Params : " + _orderSets[OBJECT_TYPE.ControlParam].Count);
}
