// MT: On startup only, this is run in parallel with MainForm.ctor and .InitThreadable()
// So don't touch anything the other touches: anything affecting the view.
// @CAN_RUN_BEFORE_VIEW_INIT
internal static void Find(bool startup = false)
{
if (!startup)
{
// Make sure we don't lose anything when we re-find!
// NOTE: This also writes out TagsStrings and then reads them back in and syncs them with Tags.
// Critical that that gets done.
Ini.WriteFullFMDataIni();
// Do this every time we modify FMsViewList in realtime, to prevent FMsDGV from redrawing from
// the list when it's in an indeterminate state (which can cause a selection change (bad) and/or
// a visible change of the list (not really bad but unprofessional looking)).
// MT: Don't do this on startup because we're running in parallel with the form new/init in that case.
Core.View.SetRowCount(0);
}
// Init or reinit - must be deep-copied or changes propagate back because reference types
// MT: This is thread-safe, the view ctor and InitThreadable() doesn't touch it.
PresetTags.DeepCopyTo(GlobalTags);
#region Back up lists and read FM data file
// Copy FMs to backup lists before clearing, in case we can't read the ini file. We don't want to end
// up with a blank or incomplete list and then glibly save it out later.
var backupList = new List <FanMission>(FMDataIniList.Count);
foreach (FanMission fm in FMDataIniList)
{
backupList.Add(fm);
}
var viewBackupList = new List <FanMission>(FMsViewList.Count);
foreach (FanMission fm in FMsViewList)
{
viewBackupList.Add(fm);
}
FMDataIniList.Clear();
FMsViewList.Clear();
// Mark this false because this flag is only there as a perf hack to make SetFilter() not have to
// iterate the FMs list for deletion markers unless it's actually going to find something. Our FMs'
// deletion markers will disappear here implicitly because the objects are destroyed and new ones
// created, but we need to explicitly set our perf-hack bool to false too.
Core.OneOrMoreFMsAreMarkedDeleted = false;
bool fmDataIniExists = File.Exists(Paths.FMDataIni);
if (fmDataIniExists)
{
try
{
Ini.ReadFMDataIni(Paths.FMDataIni, FMDataIniList);
}
catch (Exception ex)
{
Log("Exception reading FM data ini", ex);
if (startup)
{
// Language will be loaded by this point
MessageBox.Show(LText.AlertMessages.FindFMs_ExceptionReadingFMDataIni,
LText.AlertMessages.Error, MessageBoxButtons.OK, MessageBoxIcon.Error);
Core.EnvironmentExitDoShutdownTasks(1);
}
else
{
FMDataIniList.ClearAndAdd(backupList);
FMsViewList.ClearAndAdd(viewBackupList);
return;
}
}
}
#endregion
#region Get installed dirs from disk
// Could check inside the folder for a .mis file to confirm it's really an FM folder, but that's
// horrendously expensive. Talking like eight seconds vs. < 4ms for the 1098 set. Weird.
var perGameInstFMDirsList = new List <List <string> >(SupportedGameCount);
var perGameInstFMDirsDatesList = new List <List <DateTime> >(SupportedGameCount);
for (int gi = 0; gi < SupportedGameCount; gi++)
{
// NOTE! Make sure this list ends up with SupportedGameCount items in it. Just in case I change
// the loop or something.
perGameInstFMDirsList.Add(new List <string>());
perGameInstFMDirsDatesList.Add(new List <DateTime>());
string instPath = Config.FMInstallPaths[gi];
if (Directory.Exists(instPath))
{
try
{
var dirs = FastIO.GetDirsTopOnly_FMs(instPath, "*", out List <DateTime> dateTimes);
for (int di = 0; di < dirs.Count; di++)
{
string d = dirs[di];
if (!d.EqualsI(".fmsel.cache"))
{
perGameInstFMDirsList[gi].Add(d);
perGameInstFMDirsDatesList[gi].Add(dateTimes[di]);
}
}
}
catch (Exception ex)
{
Log("Exception getting directories in " + instPath, ex);
}
}
}
#endregion
#region Get archives from disk
var fmArchives = new List <string>();
var fmArchivesDates = new List <DateTime>();
var archivePaths = GetFMArchivePaths();
bool onlyOnePath = archivePaths.Count == 1;
for (int ai = 0; ai < archivePaths.Count; ai++)
{
try
{
// Returns filenames only (not full paths)
var files = FastIO.GetFilesTopOnly_FMs(archivePaths[ai], "*", out List <DateTime> dateTimes);
for (int fi = 0; fi < files.Count; fi++)
{
string f = files[fi];
// Only do .ContainsI() if we're searching multiple directories. Otherwise we're guaranteed
// no duplicates and can avoid the expensive lookup.
// @DIRSEP: These are filename only, no need for PathContainsI()
if ((onlyOnePath || !fmArchives.ContainsI(f)) && f.ExtIsArchive() && !f.ContainsI(Paths.FMSelBak))
{
fmArchives.Add(f);
fmArchivesDates.Add(dateTimes[fi]);
}
}
}
catch (Exception ex)
{
Log("Exception getting files in " + archivePaths[ai], ex);
}
}
#endregion
#region Build FanMission objects from installed dirs
var perGameFMsList = new List <List <FanMission> >(SupportedGameCount);
for (int gi = 0; gi < SupportedGameCount; gi++)
{
// NOTE! List must have SupportedGameCount items in it
perGameFMsList.Add(new List <FanMission>());
for (int di = 0; di < perGameInstFMDirsList[gi].Count; di++)
{
perGameFMsList[gi].Add(new FanMission
{
InstalledDir = perGameInstFMDirsList[gi][di],
Game = GameIndexToGame((GameIndex)gi),
Installed = true
});
}
}
#endregion
MergeNewArchiveFMs(fmArchives, fmArchivesDates);
int instInitCount = FMDataIniList.Count;
for (int i = 0; i < SupportedGameCount; i++)
{
var curGameInstFMsList = perGameFMsList[i];
if (curGameInstFMsList.Count > 0)
{
MergeNewInstalledFMs(curGameInstFMsList, perGameInstFMDirsDatesList[i], instInitCount);
}
}
SetArchiveNames(fmArchives);
SetInstalledNames();
BuildViewList(fmArchives, perGameInstFMDirsList);
/*
* TODO: There's an extreme corner case where duplicate FMs can appear in the list
* It's so unlikely it's almost not worth worrying about, but here's the scenario:
* -The FM is installed by hand and not truncated
* -The FM is not in the list
* -A matching archive exists for the FM
* In this scenario, the FM is added twice to the list, once with the full installed folder name and
* NoArchive set to true, and once with a truncated installed dir name, the correct archive name, and
* NoArchive not present (false).
* The code in here is so crazy-go-nuts I can't even find where this is happening. But putting this
* note down for the future.
*/
}
// MT: On startup only, this is run in parallel with MainForm.ctor and .InitThreadable()
// So don't touch anything the other touches: anything affecting the view.
// @CAN_RUN_BEFORE_VIEW_INIT
private static List <int> FindInternal(bool startup)
{
if (!startup)
{
// Make sure we don't lose anything when we re-find!
// NOTE: This also writes out TagsStrings and then reads them back in and syncs them with Tags.
// Critical that that gets done.
Ini.WriteFullFMDataIni();
// Do this every time we modify FMsViewList in realtime, to prevent FMsDGV from redrawing from
// the list when it's in an indeterminate state (which can cause a selection change (bad) and/or
// a visible change of the list (not really bad but unprofessional looking)).
// MT: Don't do this on startup because we're running in parallel with the form new/init in that case.
Core.View.SetRowCount(0);
}
// Init or reinit - must be deep-copied or changes propagate back because reference types
// MT: This is thread-safe, the view ctor and InitThreadable() doesn't touch it.
PresetTags.DeepCopyTo(GlobalTags);
#region Back up lists and read FM data file
// Copy FMs to backup lists before clearing, in case we can't read the ini file. We don't want to end
// up with a blank or incomplete list and then glibly save it out later.
FanMission[] backupList = new FanMission[FMDataIniList.Count];
FMDataIniList.CopyTo(backupList);
FanMission[] viewBackupList = new FanMission[FMsViewList.Count];
FMsViewList.CopyTo(viewBackupList);
FMDataIniList.Clear();
FMsViewList.Clear();
bool fmDataIniExists = File.Exists(Paths.FMDataIni);
if (fmDataIniExists)
{
try
{
Ini.ReadFMDataIni(Paths.FMDataIni, FMDataIniList);
}
catch (Exception ex)
{
Log("Exception reading FM data ini", ex);
if (startup)
{
// Language will be loaded by this point
Dialogs.ShowError(LText.AlertMessages.FindFMs_ExceptionReadingFMDataIni);
Core.EnvironmentExitDoShutdownTasks(1);
}
else
{
FMDataIniList.ClearAndAdd(backupList);
FMsViewList.ClearAndAdd(viewBackupList);
return(new List <int>());
}
}
}
#endregion
#region Get installed dirs from disk
// Could check inside the folder for a .mis file to confirm it's really an FM folder, but that's
// horrendously expensive. Talking like eight seconds vs. < 4ms for the 1098 set. Weird.
var perGameInstFMDirsList = new List <List <string> >(SupportedGameCount);
var perGameInstFMDirsDatesList = new List <List <DateTime> >(SupportedGameCount);
for (int gi = 0; gi < SupportedGameCount; gi++)
{
// NOTE! Make sure this list ends up with SupportedGameCount items in it. Just in case I change
// the loop or something.
perGameInstFMDirsList.Add(new List <string>());
perGameInstFMDirsDatesList.Add(new List <DateTime>());
string instPath = Config.GetFMInstallPath((GameIndex)gi);
if (Directory.Exists(instPath))
{
try
{
var dirs = FastIO.GetDirsTopOnly_FMs(instPath, "*", out List <DateTime> dateTimes);
for (int di = 0; di < dirs.Count; di++)
{
string d = dirs[di];
if (!d.EqualsI(Paths.FMSelCache))
{
perGameInstFMDirsList[gi].Add(d);
perGameInstFMDirsDatesList[gi].Add(dateTimes[di]);
}
}
}
catch (Exception ex)
{
Log("Exception getting directories in " + instPath, ex);
}
}
}
#endregion
#region Get archives from disk
var fmArchivesAndDatesDict = new DictionaryI <DateTime>();
var archivePaths = FMArchives.GetFMArchivePaths();
bool onlyOnePath = archivePaths.Count == 1;
for (int ai = 0; ai < archivePaths.Count; ai++)
{
try
{
// Returns filenames only (not full paths)
var files = FastIO.GetFilesTopOnly_FMs(archivePaths[ai], "*", out List <DateTime> dateTimes);
for (int fi = 0; fi < files.Count; fi++)
{
string f = files[fi];
// Do this first because it should be faster than a dictionary lookup
if (!f.ExtIsArchive())
{
continue;
}
// NOTE: We do a ContainsKey check to keep behavior the same as previously. When we use
// dict[key] = value, it _replaces_ the value with the new one every time. What we want
// is for it to just not touch it at all if the key is already in there. This check does
// technically slow it down some, but the actual perf degradation is negligible. And we
// still avoid the n-squared 1.6-million-call nightmare we get with ~1600 FMs in the list.
// Nevertheless, we can avoid even this small extra cost if we only have one FM archive
// path, so no harm in keeping the only-one-path check.
if ((onlyOnePath || !fmArchivesAndDatesDict.ContainsKey(f)) &&
// @DIRSEP: These are filename only, no need for PathContainsI()
!f.ContainsI(Paths.FMSelBak))
{
fmArchivesAndDatesDict[f] = dateTimes[fi];
}
}
}
catch (Exception ex)
{
Log("Exception getting files in " + archivePaths[ai], ex);
}
}
int fmArchivesAndDatesDictLen = fmArchivesAndDatesDict.Count;
// PERF_TODO: May want to keep these as dicts later or change other vars to dicts
string[] fmArchives = new string[fmArchivesAndDatesDictLen];
DateTime[] fmArchivesDates = new DateTime[fmArchivesAndDatesDictLen];
{
int i = 0;
foreach (var item in fmArchivesAndDatesDict)
{
fmArchives[i] = item.Key;
fmArchivesDates[i] = item.Value;
i++;
}
}
#endregion
#region Build FanMission objects from installed dirs
var perGameFMsList = new List <List <FanMission> >(SupportedGameCount);
for (int gi = 0; gi < SupportedGameCount; gi++)
{
// NOTE! List must have SupportedGameCount items in it
perGameFMsList.Add(new List <FanMission>());
for (int di = 0; di < perGameInstFMDirsList[gi].Count; di++)
{
perGameFMsList[gi].Add(new FanMission
{
InstalledDir = perGameInstFMDirsList[gi][di],
Game = GameIndexToGame((GameIndex)gi),
Installed = true
});
}
}
#endregion
MergeNewArchiveFMs(fmArchives, fmArchivesDates);
int instInitCount = FMDataIniList.Count;
for (int i = 0; i < SupportedGameCount; i++)
{
var curGameInstFMsList = perGameFMsList[i];
if (curGameInstFMsList.Count > 0)
{
MergeNewInstalledFMs(curGameInstFMsList, perGameInstFMDirsDatesList[i], instInitCount);
}
}
SetArchiveNames(fmArchives);
SetInstalledNames();
// Super quick-n-cheap hack for perf: So we don't have to iterate the whole list looking for unscanned
// FMs. This will contain indexes into FMDataIniList (not FMsViewList!)
var fmsViewListUnscanned = new List <int>(FMDataIniList.Count);
BuildViewList(fmArchives, perGameInstFMDirsList, fmsViewListUnscanned);
return(fmsViewListUnscanned);
/*
* TODO: There's an extreme corner case where duplicate FMs can appear in the list
* It's so unlikely it's almost not worth worrying about, but here's the scenario:
* -The FM is installed by hand and not truncated
* -The FM is not in the list
* -A matching archive exists for the FM
* In this scenario, the FM is added twice to the list, once with the full installed folder name and
* NoArchive set to true, and once with a truncated installed dir name, the correct archive name, and
* NoArchive not present (false).
* The code in here is so crazy-go-nuts I can't even find where this is happening. But putting this
* note down for the future.
*/
}