Ejemplo n.º 1
0
        static void RunReductionWithTextureCasting(ISimplygonSDK sdk, string readFrom, string writeTo)
        {
            // Load input geometry from file
            spWavefrontImporter objReader = sdk.CreateWavefrontImporter();

            objReader.SetExtractGroups(false); //This makes the .obj reader import into a single geometry object instead of multiple
            objReader.SetImportFilePath(readFrom);
            if (!objReader.RunImport())
            {
                Console.WriteLine("Failed to read: " + readFrom);
                return;
            }

            // Get geometry and materials from importer
            spGeometryData  originalGeom          = objReader.GetFirstGeometry(); //Only contains a single geom, so "first" is fine
            spMaterialTable originalMaterialTable = objReader.GetMaterials();

            // Create a copy of the original geometry on which we will run the reduction
            spGeometryData lodGeometry = originalGeom.NewCopy(true);

            // Create the reduction-processor, and set the geometry to reduce
            spReductionProcessor reductionProcessor = sdk.CreateReductionProcessor();

            reductionProcessor.SetGeometry(lodGeometry);


            ///////////////////////////////////////////////////////////////////////////////////////////////
            // SETTINGS - Most of these are set to the same value by default, but are set anyway for clarity

            // The reduction settings object contains settings pertaining to the actual decimation
            spReductionSettings reductionSettings = reductionProcessor.GetReductionSettings();

            reductionSettings.SetReductionHeuristics((uint)ReductionHeuristics.SG_REDUCTIONHEURISTICS_FAST); //Choose between "fast" and "consistent" processing.

            // The actual reduction triangle target are controlled by these three settings
            reductionSettings.SetStopCondition((uint)StopCondition.SG_STOPCONDITION_EITHER_IS_REACHED); //The reduction stops when either of the targets is reached
            reductionSettings.SetReductionRatio(0.5f);                                                  //Stops at 50% of the original triangle count
            reductionSettings.SetMaxDeviation(SimplygonSDK.REAL_MAX);                                   //Stops when an error of the specified size has been reached. As set here it never happens.

            // The normal calculation settings deal with the normal-specific reduction settings
            spNormalCalculationSettings normalSettings = reductionProcessor.GetNormalCalculationSettings();

            normalSettings.SetReplaceNormals(true); //If true, this will turn off normal handling in the reducer and recalculate them all afterwards instead.
            normalSettings.SetHardEdgeAngle(70.0f); //If the normals are recalculated, this sets the hard-edge angle.

            // The Image Mapping Settings, specifically needed for the texture baking we are doing later
            spMappingImageSettings mappingSettings = reductionProcessor.GetMappingImageSettings();

            mappingSettings.SetGenerateMappingImage(true); //Without this we cannot fetch data from the original geometry, and thus not generate diffuse and normal-maps later on.
            mappingSettings.SetGenerateTexCoords(true);    //Set to generate new texture coordinates.
            mappingSettings.SetMaxStretch(0.4f);           //The higher the number, the fewer texture-borders.
            mappingSettings.SetGutterSpace(2);             //Buffer space for when texture is mip-mapped, so color values don't blend over. Greatly influences packing efficiency
            mappingSettings.SetTexCoordLevel(0);           //Sets the output texcoord level. For this asset, this will overwrite the original coords
            mappingSettings.SetWidth(1024);
            mappingSettings.SetHeight(1024);
            mappingSettings.SetMultisamplingLevel(2);

            //END SETTINGS
            ///////////////////////////////////////////////////////////////////////////////////////////////


            // Run the actual processing. After this, the set geometry will have been reduced according to the settings
            reductionProcessor.RunProcessing();


            ///////////////////////////////////////////////////////////////////////////////////////////////
            // CASTING

            // Now, we need to retrieve the generated mapping image and use it to cast the old materials into a new one, for each channel.
            spMappingImage mappingImage = reductionProcessor.GetMappingImage();

            // Now, for each channel, we want to cast the 9 input materials into a single output material, with one texture per channel.
            // First, create a new material table.
            spMaterialTable lodMaterialTable = sdk.CreateMaterialTable();
            // Create new material for the table.
            spMaterial lodMaterial = sdk.CreateMaterial();

            lodMaterial.SetName("SimplygonBakedMaterial");
            lodMaterialTable.AddMaterial(lodMaterial);
            // Cast diffuse and specular texture data with a color caster
            {
                // Set the material properties
                lodMaterial.SetColor(SimplygonSDK.SG_MATERIAL_CHANNEL_AMBIENT, 0, 0, 0, 0);
                lodMaterial.SetColor(SimplygonSDK.SG_MATERIAL_CHANNEL_DIFFUSE, 1, 1, 1, 1);
                lodMaterial.SetColor(SimplygonSDK.SG_MATERIAL_CHANNEL_SPECULAR, 1, 1, 1, 128);
                //Note the 128 on the specular channels alpha. Simplygon bakes shininess
                //to the alpha channel of the specular map if the caster is set to 4 channel
                //output, and it is scaled between 0 and 1 internally. To get the correct
                //scale on the output, it should be multiplied by 128.

                // Cast the data using a color caster
                spColorCaster colorCaster = sdk.CreateColorCaster();
                colorCaster.SetSourceMaterials(originalMaterialTable);
                colorCaster.SetDestMaterial(lodMaterial);  //This modulates the cast color with the base colors set for the dest material above.
                //It means the internal shininess is multiplied by 128 before baking to texture.
                colorCaster.SetMappingImage(mappingImage); //The mapping image we got from the reduction process.
                colorCaster.SetOutputChannelBitDepth(8);   //8 bits per channel. So in this case we will have 24bit colors RGB.
                colorCaster.SetDilation(10);               //To avoid mip-map artifacts, the empty pixels on the map needs to be filled to a degree as well.

                colorCaster.SetColorType(SimplygonSDK.SG_MATERIAL_CHANNEL_DIFFUSE);
                colorCaster.SetOutputChannels(3);                        //RGB, 3 channels! (1 would be for grey scale, and 4 would be for RGBA.)
                colorCaster.SetOutputFilePath("combinedDiffuseMap.png"); //Where the texture map will be saved to file.
                colorCaster.CastMaterials();                             //Do the actual casting and write to texture.

                colorCaster.SetColorType(SimplygonSDK.SG_MATERIAL_CHANNEL_SPECULAR);
                colorCaster.SetOutputChannels(4);                         //RGBA, 4 channels! Stores spec power in A
                colorCaster.SetOutputFilePath("combinedSpecularMap.png"); //Where the texture map will be saved to file.
                colorCaster.CastMaterials();                              //Do the actual casting and write to texture.


                lodMaterial.SetTexture(SimplygonSDK.SG_MATERIAL_CHANNEL_DIFFUSE, "combinedDiffuseMap.png");   //Set material to point to the texture we cast to above
                lodMaterial.SetTexture(SimplygonSDK.SG_MATERIAL_CHANNEL_SPECULAR, "combinedSpecularMap.png"); //Set material to point to the texture we cast to above
            }

            // Cast normal map texture data with the normal caster. This also compensates for any geometric errors that have appeared in the reduction process.
            {
                // cast the data using a normal caster
                spNormalCaster normalCaster = sdk.CreateNormalCaster();
                normalCaster.SetSourceMaterials(originalMaterialTable);
                normalCaster.SetMappingImage(mappingImage);
                normalCaster.SetOutputChannels(3); // RGB, 3 channels! (But really the x, y and z values for the normal)
                normalCaster.SetOutputChannelBitDepth(8);
                normalCaster.SetDilation(10);
                normalCaster.SetOutputFilePath("combinedNormalMap.png");
                normalCaster.SetFlipBackfacingNormals(false);
                normalCaster.SetGenerateTangentSpaceNormals(true);
                normalCaster.CastMaterials();

                // Set normal map of the created material to point to the combined normal map
                lodMaterial.SetTexture(SimplygonSDK.SG_MATERIAL_CHANNEL_NORMALS, "combinedNormalMap.png");
            }

            // END CASTING
            ///////////////////////////////////////////////////////////////////////////////////////////////

            //Create an .obj exporter to save our result
            spWavefrontExporter objExporter = sdk.CreateWavefrontExporter();

            // Generate the output filenames
            // Do the actual exporting
            objExporter.SetExportFilePath(writeTo + ".obj");
            objExporter.SetSingleGeometry(lodGeometry); //This is the geometry we set as the processing geom of the reducer
            objExporter.SetMaterials(lodMaterialTable); //Our new cast material
            if (!objExporter.RunExport())
            {
                Console.WriteLine("Failed to write target file");
            }

            //Done! LOD and material created.
        }
Ejemplo n.º 2
0
        static bool run_remeshing_for_lod(ISimplygonSDK sdk, int lod_index, uint merge_distance)
        {
            string userProfileDirectory     = System.Environment.GetEnvironmentVariable("USERPROFILE");
            string assetRoot                = userProfileDirectory + @"/Documents/SimplygonSDK/SourceCode/Assets/";
            string tempRoot                 = @"../../../../../temp/";
            string output_filename          = string.Format(tempRoot + "wall_lod{0}_merge{1}.obj", lod_index + 1, merge_distance);
            string output_material_filename = string.Format(tempRoot + "wall_lod{0}_merge{1}.mtl", lod_index + 1, merge_distance);
            string output_diffuse_filename  = string.Format(tempRoot + "wall_lod{0}_merge{1}_diffuse.png", lod_index + 1, merge_distance);
            string output_normals_filename  = string.Format(tempRoot + "wall_lod{0}_merge{1}_normals.png", lod_index + 1, merge_distance);


            // Import source geometry
            spGeometryData  geom;
            spMaterialTable materials;

            Console.WriteLine("Importing wavefront .obj file...\n");
            {
                // Run import
                spWavefrontImporter importer = sdk.CreateWavefrontImporter();
                importer.SetExtractGroups(false); // We only want one large geometry, no need to extract groups

                importer.SetImportFilePath(assetRoot + "wall.obj");
                if (!importer.RunImport())
                {
                    Console.WriteLine("Could not open input test file");
                    return(false);
                }

                // Get the only geometry and the materials
                geom      = importer.GetFirstGeometry();
                materials = importer.GetMaterials();
            }

            // Make a copy of the geometry, we need the original for texture casting later.
            // The remesher will replace the data of the geometry after it has processed it.
            spGeometryData red_geom = geom.NewCopy(true);

            // Create a Scene-object and a SceneMesh-object.
            // Place the red_geom into the SceneMesh, and then the SceneMesh as a child to the RootNode.
            spScene     scene = sdk.CreateScene();
            spSceneMesh mesh  = sdk.CreateSceneMesh();

            mesh.SetGeometry(red_geom);
            mesh.SetName(red_geom.GetName().GetText());
            scene.GetRootNode().AddChild(mesh);

            spMappingImage mapping_image;

            // Remesh it
            Console.WriteLine("Running remesher...\n");
            {
                spRemeshingProcessor remesher = sdk.CreateRemeshingProcessor();

                //  Set target on-screen size in pixels
                remesher.GetRemeshingSettings().SetOnScreenSize(lod_sizes[lod_index]);
                //  Set the on-screen merge distance in pixels. Holes smaller than this will be sealed
                //  and geometries closer to each other than this will be merged.
                remesher.GetRemeshingSettings().SetMergeDistance(merge_distance);
                //  Disable the cutting plane
                remesher.GetRemeshingSettings().SetUseGroundPlane(false);
                //	Set to generate mapping image for texture casting.
                remesher.GetMappingImageSettings().SetGenerateMappingImage(true);

                remesher.SetSceneRoot(scene.GetRootNode());
                remesher.RemeshGeometry();

                // Mapping image is needed later on for texture casting.
                mapping_image = remesher.GetMappingImage();
            }

            spSceneMesh topmesh = Utils.SimplygonCast <spSceneMesh>(scene.GetRootNode().GetChild(0), false);

            // Cast diffuse texture and normal map data into a new material
            //	Create new material table.
            spMaterialTable output_materials = sdk.CreateMaterialTable();
            //	Create new material for the table.
            spMaterial output_material = sdk.CreateMaterial();

            output_materials.AddMaterial(output_material);

            // Cast diffuse texture data
            {
                // Cast the data using a color caster
                spColorCaster cast = sdk.CreateColorCaster();
                cast.SetColorType(SimplygonSDK.SG_MATERIAL_CHANNEL_DIFFUSE);
                cast.SetSourceMaterials(materials);
                cast.SetMappingImage(mapping_image);             // The mapping image we got from the remeshing process.
                cast.SetOutputChannels(3);                       // RGB, 3 channels! (1 would be for grey scale, and 4 would be for RGBA.)
                cast.SetOutputChannelBitDepth(8);                // 8 bits per channel. So in this case we will have 24bit colors RGB.
                cast.SetDilation(10);                            // To avoid mip-map artifacts, the empty pixels on the map needs to be filled to a degree aswell.
                cast.SetOutputFilePath(output_diffuse_filename); // Where the texture map will be saved to file.
                cast.CastMaterials();                            // Fetch!

                // set the material properties
                // Set the diffuse multiplier for the texture. 1 means it will not differ from original texture,
                // For example: 0 would ignore a specified color and 2 would make a color twice as pronounced as the others.
                output_material.SetDiffuseRed(1);
                output_material.SetDiffuseGreen(1);
                output_material.SetDiffuseBlue(1);
                // Set material to point to created texture filename.
                output_material.SetTexture(SimplygonSDK.SG_MATERIAL_CHANNEL_DIFFUSE, output_diffuse_filename);
            }

            // cast normal map texture data
            {
                // cast the data using a color caster
                spNormalCaster cast = sdk.CreateNormalCaster();
                cast.SetSourceMaterials(materials);
                cast.SetMappingImage(mapping_image);
                cast.SetOutputChannels(3); // RGB, 3 channels! (But really the x, y and z values for the normal)
                cast.SetOutputChannelBitDepth(8);
                cast.SetDilation(10);
                cast.SetOutputFilePath(output_normals_filename);
                cast.CastMaterials();

                // Set material to point to created texture filename.
                output_material.SetTexture(SimplygonSDK.SG_MATERIAL_CHANNEL_NORMALS, output_normals_filename);
            }

            // export the remeshed geometry to an OBJ file
            Console.WriteLine("Exporting wavefront .obj file...\n");
            {
                spWavefrontExporter exporter = sdk.CreateWavefrontExporter();
                exporter.SetExportFilePath(output_filename);
                exporter.SetSingleGeometry(topmesh.GetGeometry());
                exporter.SetMaterials(output_materials);
                if (!exporter.RunExport())
                {
                    Console.WriteLine("Failed to write result");
                    return(false);
                }
            }
            return(true);
        }