/// <summary>Send back an ONC/RPC reply to the caller who sent in this call.</summary>
/// <remarks>
/// Send back an ONC/RPC reply to the caller who sent in this call. This
/// automatically sends an ONC/RPC reply header before the reply part,
/// indicating success within the header.
/// </remarks>
/// <param name="reply">Reply body the ONC/RPC reply message.</param>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully serialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
public virtual void reply(org.acplt.oncrpc.XdrAble rply)
{
reply(new org.acplt.oncrpc.server.OncRpcServerReplyMessage(callMessage, org.acplt.oncrpc.OncRpcReplyStatus
.ONCRPC_MSG_ACCEPTED, org.acplt.oncrpc.OncRpcAcceptStatus.ONCRPC_SUCCESS, org.acplt.oncrpc.OncRpcReplyMessage
.UNUSED_PARAMETER, org.acplt.oncrpc.OncRpcReplyMessage.UNUSED_PARAMETER, org.acplt.oncrpc.OncRpcReplyMessage
.UNUSED_PARAMETER, org.acplt.oncrpc.OncRpcReplyMessage.UNUSED_PARAMETER), rply);
}
/// <summary>
/// Creates a new <code>KscPackageUpdateEvent</code> object and
/// initializes its state.
/// </summary>
/// <remarks>
/// Creates a new <code>KscPackageUpdateEvent</code> object and
/// initializes its state.
/// </remarks>
/// <param name="source">
/// The
/// <see cref="OncRpcUdpClient">ONC/RPC client object</see>
/// which has
/// fired this event.
/// </param>
/// <param name="replyAddress">Internetaddress of reply's origin.</param>
/// <param name="procedureNumber">Procedure number of ONC/RPC call.</param>
/// <param name="params">The ONC/RPC call resulting in this reply.</param>
/// <param name="reply">The ONC/RPC reply itself.</param>
public OncRpcBroadcastEvent(org.acplt.oncrpc.OncRpcUdpClient source, IPAddress
replyAddress, int procedureNumber, org.acplt.oncrpc.XdrAble @params, org.acplt.oncrpc.XdrAble
reply)
{
this.replyAddress = replyAddress;
this.procedureNumber = procedureNumber;
this.@params = @params;
this.reply = reply;
}
/// <summary>Retrieves the parameters sent within an ONC/RPC call message.</summary>
/// <remarks>
/// Retrieves the parameters sent within an ONC/RPC call message. It also
/// makes sure that the deserialization process is properly finished after
/// the call parameters have been retrieved. Under the hood this method
/// therefore calls
/// <see cref="org.acplt.oncrpc.XdrDecodingStream.endDecoding()">org.acplt.oncrpc.XdrDecodingStream.endDecoding()
/// </see>
/// to free any
/// pending resources from the decoding stage.
/// </remarks>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully deserialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
internal override void retrieveCall(org.acplt.oncrpc.XdrAble call)
{
call.xdrDecode(receivingXdr);
if (pendingDecoding)
{
pendingDecoding = false;
receivingXdr.endDecoding();
}
}
// for ( refreshesLeft )
/// <summary>Issues a batched call for a remote procedure to an ONC/RPC server.</summary>
/// <remarks>
/// Issues a batched call for a remote procedure to an ONC/RPC server.
/// Below is a small example (exception handling ommited for clarity):
/// <pre>
/// OncRpcTcpClient client = new OncRpcTcpClient(
/// InetAddress.getByName("localhost"),
/// myprogramnumber, myprogramversion,
/// OncRpcProtocols.ONCRPC_TCP);
/// client.callBatch(42, myparams, false);
/// client.callBatch(42, myotherparams, false);
/// client.callBatch(42, myfinalparams, true);
/// </pre>
/// In the example above, three calls are batched in a row and only be sent
/// all together with the third call. Note that batched calls must not expect
/// replies, with the only exception being the last call in a batch:
/// <pre>
/// client.callBatch(42, myparams, false);
/// client.callBatch(42, myotherparams, false);
/// client.call(43, myfinalparams, myfinalresult);
/// </pre>
/// </remarks>
/// <param name="procedureNumber">Procedure number of the procedure to call.</param>
/// <param name="params">
/// The parameters of the procedure to call, contained
/// in an object which implements the
/// <see cref="XdrAble">XdrAble</see>
/// interface.
/// </param>
/// <param name="flush">
/// Make sure that all pending batched calls are sent to
/// the server.
/// </param>
/// <exception cref="OncRpcException">if an ONC/RPC error occurs.</exception>
/// <exception cref="org.acplt.oncrpc.OncRpcException"></exception>
public virtual void batchCall(int procedureNumber, org.acplt.oncrpc.XdrAble @params
, bool flush)
{
lock (this)
{
//
// First, build the ONC/RPC call header. Then put the sending
// stream into a known state and encode the parameters to be
// sent. Finally tell the encoding stream to send all its data
// to the server. We don't then need to wait for an answer. And
// we don't need to take care of credential refreshes either.
//
nextXid();
org.acplt.oncrpc.OncRpcClientCallMessage callHeader = new org.acplt.oncrpc.OncRpcClientCallMessage
(xid, program, version, procedureNumber, auth);
//
// Send call message to server. If we receive an IOException,
// then we'll throw the appropriate ONC/RPC (client) exception.
// Note that we use a connected stream, so we don't need to
// specify a destination when beginning serialization.
//
try
{
socket.SendTimeout = transmissionTimeout;
sendingXdr.beginEncoding(null, 0);
callHeader.xdrEncode(sendingXdr);
@params.xdrEncode(sendingXdr);
sendingXdr.endEncoding(flush);
}
catch (System.IO.IOException e)
{
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTSEND
, e.Message));
}
}
}
/// <summary>Calls a remote procedure on an ONC/RPC server.</summary>
/// <remarks>
/// Calls a remote procedure on an ONC/RPC server.
/// <p>Please note that while this method supports call batching by
/// setting the communication timeout to zero
/// (<code>setTimeout(0)</code>) you should better use
/// <see cref="batchCall(int, XdrAble, bool)">batchCall(int, XdrAble, bool)</see>
/// as it provides better control over when the
/// batch should be flushed to the server.
/// </remarks>
/// <param name="procedureNumber">Procedure number of the procedure to call.</param>
/// <param name="versionNumber">Protocol version number.</param>
/// <param name="params">
/// The parameters of the procedure to call, contained
/// in an object which implements the
/// <see cref="XdrAble">XdrAble</see>
/// interface.
/// </param>
/// <param name="result">The object receiving the result of the procedure call.</param>
/// <exception cref="OncRpcException">if an ONC/RPC error occurs.</exception>
/// <exception cref="org.acplt.oncrpc.OncRpcException"></exception>
public override void call(int procedureNumber, int versionNumber, org.acplt.oncrpc.XdrAble
@params, org.acplt.oncrpc.XdrAble result)
{
lock (this)
{
// Refresh:
for (int refreshesLeft = 1; refreshesLeft >= 0; --refreshesLeft)
{
//
// First, build the ONC/RPC call header. Then put the sending
// stream into a known state and encode the parameters to be
// sent. Finally tell the encoding stream to send all its data
// to the server. Then wait for an answer, receive it and decode
// it. So that's the bottom line of what we do right here.
//
nextXid();
org.acplt.oncrpc.OncRpcClientCallMessage callHeader = new org.acplt.oncrpc.OncRpcClientCallMessage
(xid, program, versionNumber, procedureNumber, auth);
org.acplt.oncrpc.OncRpcClientReplyMessage replyHeader = new org.acplt.oncrpc.OncRpcClientReplyMessage
(auth);
//
// Send call message to server. If we receive an IOException,
// then we'll throw the appropriate ONC/RPC (client) exception.
// Note that we use a connected stream, so we don't need to
// specify a destination when beginning serialization.
//
try
{
socket.ReceiveTimeout = transmissionTimeout;
sendingXdr.beginEncoding(null, 0);
callHeader.xdrEncode(sendingXdr);
@params.xdrEncode(sendingXdr);
if (timeout != 0)
{
sendingXdr.endEncoding();
}
else
{
sendingXdr.endEncoding(false);
}
}
catch (System.IO.IOException e)
{
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTSEND
, e.Message));
}
//
// Receive reply message from server -- at least try to do so...
// In case of batched calls we don't need no stinkin' answer, so
// we can do other, more interesting things.
//
if (timeout == 0)
{
return;
}
try
{
//
// Keep receiving until we get the matching reply.
//
while (true)
{
socket.ReceiveTimeout = timeout;
receivingXdr.beginDecoding();
socket.ReceiveTimeout = transmissionTimeout;
//
// First, pull off the reply message header of the
// XDR stream. In case we also received a verifier
// from the server and this verifier was invalid, broken
// or tampered with, we will get an
// OncRpcAuthenticationException right here, which will
// propagate up to the caller. If the server reported
// an authentication problem itself, then this will
// be handled as any other rejected ONC/RPC call.
//
try
{
replyHeader.xdrDecode(receivingXdr);
}
catch (org.acplt.oncrpc.OncRpcException e)
{
//
// ** SF bug #1262106 **
//
// We ran into some sort of trouble. Usually this will have
// been a buffer underflow. Whatever, end the decoding process
// and ensure this way that the next call has a chance to start
// from a clean state.
//
receivingXdr.endDecoding();
throw (e);
}
//
// Only deserialize the result, if the reply matches the
// call. Otherwise skip this record.
//
if (replyHeader.messageId == callHeader.messageId)
{
break;
}
receivingXdr.endDecoding();
}
//
// Make sure that the call was accepted. In case of unsuccessful
// calls, throw an exception, if it's not an authentication
// exception. In that case try to refresh the credential first.
//
if (!replyHeader.successfullyAccepted())
{
receivingXdr.endDecoding();
//
// Check whether there was an authentication
// problem. In this case first try to refresh the
// credentials.
//
if ((refreshesLeft > 0) && (replyHeader.replyStatus == org.acplt.oncrpc.OncRpcReplyStatus
.ONCRPC_MSG_DENIED) && (replyHeader.rejectStatus == org.acplt.oncrpc.OncRpcRejectStatus
.ONCRPC_AUTH_ERROR) && (auth != null) && auth.canRefreshCred())
{
// continue Refresh;
continue;
}
//
// Nope. No chance. This gets tough.
//
throw (replyHeader.newException());
}
try
{
result.xdrDecode(receivingXdr);
}
catch (org.acplt.oncrpc.OncRpcException e)
{
//
// ** SF bug #1262106 **
//
// We ran into some sort of trouble. Usually this will have
// been a buffer underflow. Whatever, end the decoding process
// and ensure this way that the next call has a chance to start
// from a clean state.
//
receivingXdr.endDecoding();
throw (e);
}
//
// Free pending resources of buffer and exit the call loop,
// returning the reply to the caller through the result
// object.
//
receivingXdr.endDecoding();
return;
}
catch (System.IO.IOException e)
{
//
// Argh. Trouble with the transport. Seems like we can't
// receive data. Gosh. Go away!
//
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTRECV
, e.Message));
}
}
}
}
// for ( refreshesLeft )
/// <summary>Broadcast a remote procedure call to several ONC/RPC servers.</summary>
/// <remarks>
/// Broadcast a remote procedure call to several ONC/RPC servers. For this
/// you'll need to specify either a multicast address or the subnet's
/// broadcast address when creating a <code>OncRpcUdpClient</code>. For
/// every reply received, an event containing the reply is sent to the
/// OncRpcBroadcastListener <code>listener</code>, which is the last
/// parameter to the this method.
/// <p>In contrast to the
/// <see cref="OncRpcClient.call(int, XdrAble, XdrAble)">OncRpcClient.call(int, XdrAble, XdrAble)
/// </see>
/// method,
/// <code>broadcastCall</code> will only send the ONC/RPC call once. It
/// will then wait for answers until the timeout as set by
/// <see cref="OncRpcClient.setTimeout(int)">OncRpcClient.setTimeout(int)</see>
/// expires without resending the reply.
/// <p>Note that you might experience unwanted results when using
/// authentication types other than
/// <see cref="OncRpcClientAuthNone">OncRpcClientAuthNone</see>
/// , causing
/// messed up authentication protocol handling objects. This depends on
/// the type of authentication used. For <code>AUTH_UNIX</code> nothing
/// bad happens as long as none of the servers replies with a shorthand
/// verifier. If it does, then this shorthand will be used on all subsequent
/// ONC/RPC calls, something you probably do not want at all.
/// </remarks>
/// <param name="procedureNumber">Procedure number of the procedure to call.</param>
/// <param name="params">
/// The parameters of the procedure to call, contained
/// in an object which implements the
/// <see cref="XdrAble">XdrAble</see>
/// interface.
/// </param>
/// <param name="result">
/// The object receiving the result of the procedure call.
/// Note that this object is reused to deserialize all incomming replies
/// one after another.
/// </param>
/// <param name="listener">
/// Listener which will get an
/// <see cref="OncRpcBroadcastEvent">OncRpcBroadcastEvent</see>
/// for every reply received.
/// </param>
/// <exception cref="OncRpcException">if an ONC/RPC error occurs.</exception>
/// <exception cref="org.acplt.oncrpc.OncRpcException"></exception>
public virtual void broadcastCall(int procedureNumber, org.acplt.oncrpc.XdrAble @params
, org.acplt.oncrpc.XdrAble result, org.acplt.oncrpc.OncRpcBroadcastListener listener
)
{
lock (this)
{
//
// First, build the ONC/RPC call header. Then put the sending
// stream into a known state and encode the parameters to be
// sent. Finally tell the encoding stream to broadcast all its data.
// Then wait for answers, receive and decode them one at a time.
//
nextXid();
org.acplt.oncrpc.OncRpcClientCallMessage callHeader = new org.acplt.oncrpc.OncRpcClientCallMessage
(xid, program, version, procedureNumber, auth);
org.acplt.oncrpc.OncRpcClientReplyMessage replyHeader = new org.acplt.oncrpc.OncRpcClientReplyMessage
(auth);
//
// Broadcast the call. Note that we send the call only once and will
// never resend it.
//
try
{
//
// Send call message to server. Remember that we've already
// "connected" the datagram socket, so java.net knows whom
// to send the datagram packets.
//
sendingXdr.beginEncoding(host, port);
callHeader.xdrEncode(sendingXdr);
@params.xdrEncode(sendingXdr);
sendingXdr.endEncoding();
}
catch (System.IO.IOException e)
{
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTSEND
, e.Message));
}
//
// Now enter the great loop where sit waiting for replies to our
// broadcast call to come in. In every case, we wait until the
// (total) timeout expires.
//
DateTime stopTime = DateTime.Now + new TimeSpan(timeout);
do
{
try
{
//
// Calculate timeout until the total timeout is reached, so
// we can try to meet the overall deadline.
//
TimeSpan currentTimeout = (stopTime - DateTime.Now);
if (currentTimeout.Ticks < 0)
{
currentTimeout = new TimeSpan(0);
}
socket.ReceiveTimeout = currentTimeout.Seconds;
//
// Then wait for datagrams to arrive...
//
receivingXdr.beginDecoding();
replyHeader.xdrDecode(receivingXdr);
//
// Only deserialize the result, if the reply matches the call
// and if the reply signals a successful call. In case of an
// unsuccessful call (which mathes our call nevertheless) throw
// an exception.
//
if (replyHeader.messageId == callHeader.messageId)
{
if (!replyHeader.successfullyAccepted())
{
//
// We got a notification of a rejected call. We silently
// ignore such replies and continue listening for other
// replies.
//
receivingXdr.endDecoding();
}
result.xdrDecode(receivingXdr);
//
// Notify a potential listener of the reply.
//
if (listener != null)
{
org.acplt.oncrpc.OncRpcBroadcastEvent evt = new org.acplt.oncrpc.OncRpcBroadcastEvent
(this, receivingXdr.getSenderAddress(), procedureNumber, @params, result);
listener.replyReceived(evt);
}
//
// Free pending resources of buffer and exit the call loop,
// returning the reply to the caller through the result
// object.
//
receivingXdr.endDecoding();
}
else
{
//
// This should raise no exceptions, when skipping the UDP
// record. So if one is raised, we will rethrow an ONC/RPC
// exception instead.
//
try
{
receivingXdr.endDecoding();
}
catch (System.IO.IOException e)
{
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTRECV
, e.Message));
}
}
}
catch (SocketException)
{
}
catch (System.IO.IOException e)
{
//
// Note that we only catch timeouts here, but no other
// exceptions. Those others will go up further until someone
// catches them. If we get the timeout we know that it
// could be time to leave the stage and so we fall through
// to the total timeout check.
//
//
// Argh. Trouble with the transport. Seems like we can't
// receive data. Gosh. Go away!
//
throw (new org.acplt.oncrpc.OncRpcException(org.acplt.oncrpc.OncRpcException.RPC_CANTRECV
, e.Message));
}
}while (DateTime.Now < stopTime);
return;
}
}
/// <summary>Send back an ONC/RPC reply to the caller who sent in this call.</summary>
/// <remarks>
/// Send back an ONC/RPC reply to the caller who sent in this call. This is
/// a low-level function and typically should not be used by call
/// dispatchers. Instead use the other
/// <see cref="reply(org.acplt.oncrpc.XdrAble)">reply method</see>
/// which just expects a serializable object to send back to the caller.
/// </remarks>
/// <param name="state">
/// ONC/RPC reply message header indicating success or failure
/// and containing associated state information.
/// </param>
/// <param name="reply">
/// If not <code>null</code>, then this parameter references
/// the reply to be serialized after the reply message header.
/// </param>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully serialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
/// <seealso cref="org.acplt.oncrpc.OncRpcReplyMessage">org.acplt.oncrpc.OncRpcReplyMessage
/// </seealso>
/// <seealso cref="OncRpcDispatchable">OncRpcDispatchable</seealso>
public virtual void reply(org.acplt.oncrpc.server.OncRpcServerReplyMessage state,
org.acplt.oncrpc.XdrAble reply)
{
transport.reply(this, state, reply);
}
/// <summary>Retrieves the parameters sent within an ONC/RPC call message.</summary>
/// <remarks>
/// Retrieves the parameters sent within an ONC/RPC call message. It also
/// makes sure that the deserialization process is properly finished after
/// the call parameters have been retrieved.
/// </remarks>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully deserialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
public virtual void retrieveCall(org.acplt.oncrpc.XdrAble call)
{
transport.retrieveCall(call);
}
/// <summary>Do not call.</summary>
/// <remarks>Do not call.</remarks>
/// <exception cref="System.Exception">
/// because this method must not be called for a listening
/// server transport.
/// </exception>
/// <exception cref="org.acplt.oncrpc.OncRpcException"></exception>
/// <exception cref="System.IO.IOException"></exception>
internal override void reply(org.acplt.oncrpc.server.OncRpcCallInformation callInfo
, org.acplt.oncrpc.server.OncRpcServerReplyMessage state, org.acplt.oncrpc.XdrAble
reply)
{
throw (new System.Exception("OncRpcTcpServerTransport.reply() is abstract " + "and can not be called."
));
}
/// <summary>Do not call.</summary>
/// <remarks>Do not call.</remarks>
/// <exception cref="System.Exception">
/// because this method must not be called for a listening
/// server transport.
/// </exception>
/// <exception cref="org.acplt.oncrpc.OncRpcException"></exception>
/// <exception cref="System.IO.IOException"></exception>
internal override void retrieveCall(org.acplt.oncrpc.XdrAble call)
{
throw (new System.Exception("OncRpcTcpServerTransport.retrieveCall() is abstract "
+ "and can not be called."));
}
/// <summary>Send back an ONC/RPC reply to the original caller.</summary>
/// <remarks>
/// Send back an ONC/RPC reply to the original caller. This is rather a
/// low-level method, typically not used by applications. Dispatcher handling
/// ONC/RPC calls have to use the
/// <see cref="OncRpcCallInformation.reply(org.acplt.oncrpc.XdrAble)">OncRpcCallInformation.reply(org.acplt.oncrpc.XdrAble)
/// </see>
/// method instead on the
/// call object supplied to the handler.
/// <p>An appropriate implementation has to be provided in derived classes
/// as it is dependent on the type of transport (whether UDP/IP or TCP/IP)
/// used.
/// </remarks>
/// <param name="callInfo">
/// information about the original call, which are necessary
/// to send back the reply to the appropriate caller.
/// </param>
/// <param name="state">
/// ONC/RPC reply message header indicating success or failure
/// and containing associated state information.
/// </param>
/// <param name="reply">
/// If not <code>null</code>, then this parameter references
/// the reply to be serialized after the reply message header.
/// </param>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully serialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
/// <seealso cref="OncRpcCallInformation">OncRpcCallInformation</seealso>
/// <seealso cref="OncRpcDispatchable">OncRpcDispatchable</seealso>
internal abstract void reply(org.acplt.oncrpc.server.OncRpcCallInformation callInfo
, org.acplt.oncrpc.server.OncRpcServerReplyMessage state, org.acplt.oncrpc.XdrAble
reply);
/// <summary>Retrieves the parameters sent within an ONC/RPC call message.</summary> /// <remarks> /// Retrieves the parameters sent within an ONC/RPC call message. It also /// makes sure that the deserialization process is properly finished after /// the call parameters have been retrieved. Under the hood this method /// therefore calls /// <see cref="org.acplt.oncrpc.XdrDecodingStream.endDecoding()">org.acplt.oncrpc.XdrDecodingStream.endDecoding() /// </see> /// to free any /// pending resources from the decoding stage. /// </remarks> /// <exception cref="org.acplt.oncrpc.OncRpcException"> /// if an ONC/RPC exception occurs, like the data /// could not be successfully deserialized. /// </exception> /// <exception cref="System.IO.IOException"> /// if an I/O exception occurs, like transmission /// failures over the network, etc. /// </exception> internal abstract void retrieveCall(org.acplt.oncrpc.XdrAble call);
/// <summary>Send back an ONC/RPC reply to the original caller.</summary>
/// <remarks>
/// Send back an ONC/RPC reply to the original caller. This is rather a
/// low-level method, typically not used by applications. Dispatcher handling
/// ONC/RPC calls have to use the
/// <see cref="OncRpcCallInformation.reply(org.acplt.oncrpc.XdrAble)">OncRpcCallInformation.reply(org.acplt.oncrpc.XdrAble)
/// </see>
/// method instead on the
/// call object supplied to the handler.
/// </remarks>
/// <param name="callInfo">
/// information about the original call, which are necessary
/// to send back the reply to the appropriate caller.
/// </param>
/// <param name="state">
/// ONC/RPC reply message header indicating success or failure
/// and containing associated state information.
/// </param>
/// <param name="reply">
/// If not <code>null</code>, then this parameter references
/// the reply to be serialized after the reply message header.
/// </param>
/// <exception cref="org.acplt.oncrpc.OncRpcException">
/// if an ONC/RPC exception occurs, like the data
/// could not be successfully serialized.
/// </exception>
/// <exception cref="System.IO.IOException">
/// if an I/O exception occurs, like transmission
/// failures over the network, etc.
/// </exception>
/// <seealso cref="OncRpcCallInformation">OncRpcCallInformation</seealso>
/// <seealso cref="OncRpcDispatchable">OncRpcDispatchable</seealso>
internal override void reply(org.acplt.oncrpc.server.OncRpcCallInformation callInfo
, org.acplt.oncrpc.server.OncRpcServerReplyMessage state, org.acplt.oncrpc.XdrAble
reply)
{
beginEncoding(callInfo, state);
if (reply != null)
{
reply.xdrEncode(sendingXdr);
}
endEncoding();
}
/// <summary>
/// Creates a new <code>KscPackageUpdateEvent</code> object and
/// initializes its state.
/// </summary>
/// <remarks>
/// Creates a new <code>KscPackageUpdateEvent</code> object and
/// initializes its state.
/// </remarks>
/// <param name="source">
/// The
/// <see cref="OncRpcUdpClient">ONC/RPC client object</see>
/// which has
/// fired this event.
/// </param>
/// <param name="replyAddress">Internetaddress of reply's origin.</param>
/// <param name="procedureNumber">Procedure number of ONC/RPC call.</param>
/// <param name="params">The ONC/RPC call resulting in this reply.</param>
/// <param name="reply">The ONC/RPC reply itself.</param>
public OncRpcBroadcastEvent(org.acplt.oncrpc.OncRpcUdpClient source, IPAddress
replyAddress, int procedureNumber, org.acplt.oncrpc.XdrAble @params, org.acplt.oncrpc.XdrAble
reply)
{
this.replyAddress = replyAddress;
this.procedureNumber = procedureNumber;
this.@params = @params;
this.reply = reply;
}
