// old obsolete code follows
public static int oz_start()
{
libUSB_Interface.usb_bus bus;
try
{
libUSB_Interface.usb_init();
System.Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
System.Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
System.Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
System.Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
System.Console.WriteLine("An error occurred: " + e.Message);
return(1);
}
int vid = 0xfffe;
int pid = 0x7;
System.Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = HPSDR_USB_LIB_V1.USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
System.Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
System.Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return(1);
}
return(1);
}
static void Main(string[] args)
{
if ((args.Length != 3) || (args.Length == 0))
{
Console.WriteLine("usage: load_firmware <VID> <PID> <filename>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
string filename = args[2];
if (!(File.Exists(filename)))
{
Console.WriteLine(filename + " does not exist!");
return;
}
libUSB_Interface.usb_bus bus;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Resetting CPU...Reset ON...");
Console.WriteLine("Result: " + USB.Reset_CPU(usb_dev_handle, true).ToString());
Console.WriteLine("Opening intel hex file: " + filename);
try
{
Console.WriteLine("Result: " + USB.Upload_Firmware(usb_dev_handle, filename).ToString());
}
catch (Exception e)
{
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("Error occurred: " + e.Message);
return;
}
Console.WriteLine("Taking CPU out of reset...");
Console.WriteLine("Result: " + USB.Reset_CPU(usb_dev_handle, false).ToString());
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
static void Main(string[] args)
{
if ((args.Length != 5) || (args.Length == 0))
{
Console.WriteLine("usage: write_EEPROM <VID> <PID> <i2c_address in hex> <start_pos in hex> <value in hex>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
if (args[2].Length > 2)
{
if (args[2].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify i2c_addr in Hex (0x0)");
return;
}
else
{
args[2] = args[2].Substring(2);
}
}
else
{
Console.WriteLine("You must specify i2c_addr in Hex (0x0)");
return;
}
int i2c_addr = int.Parse(args[2], NumberStyles.HexNumber);
if (args[3].Length > 2)
{
if (args[3].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify start_pos in Hex (0x0)");
return;
}
else
{
args[3] = args[3].Substring(2);
}
}
else
{
Console.WriteLine("You must specify start_pos in Hex (0x0)");
return;
}
int start = int.Parse(args[3], NumberStyles.HexNumber);
if (args[4].Length > 2)
{
if (args[4].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify value in Hex (0x0)");
return;
}
else
{
args[4] = args[4].Substring(2);
}
}
else
{
Console.WriteLine("You must specify value in Hex (0x0)");
return;
}
int value = int.Parse(args[4], NumberStyles.HexNumber);
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
libUSB_Interface.usb_bus bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
byte[] buf = new byte[1];
buf[0] = (byte)value;
if ((OZY.Write_EEPROM(usb_dev_handle, i2c_addr, start, buf)))
{
Console.WriteLine("Writing address " + i2c_addr);
}
else
{
Console.WriteLine("Failed to write address " + i2c_addr);
}
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
public void run()
{
libUSB_Interface.usb_bus bus;
vid = 0xfffe;
pid = 0x7;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
// IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
while (true)
{
int status;
#if false
Console.WriteLine("none on");
LatchEmAll(usb_dev_handle, 0x0);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status);
Thread.Sleep(2000);
Console.WriteLine("half on");
LatchEmAll(usb_dev_handle, 0x55);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status);
Thread.Sleep(2000);
Console.WriteLine("other half on");
LatchEmAll(usb_dev_handle, 0xaa);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status);
Thread.Sleep(2000);
Console.WriteLine("all on");
LatchEmAll(usb_dev_handle, 0xff);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status);
Thread.Sleep(2000);
#endif
#if false
int rc;
for (int i = 0; i < 64; i++)
{
Console.WriteLine("i: " + i + " (0x" + i.ToString("X") + ")");
writeDataSPI(usb_dev_handle, (byte)i);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
status = readStatusSPI(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X") + " i: " + i.ToString("X"));
Console.WriteLine();
}
#endif
#if true
Console.WriteLine("all on");
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
writeDataReg(usb_dev_handle, 0xff);
// writeDataSPI(usb_dev_handle, 0xff);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
//Console.WriteLine("clear_halt rc=" + rc);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
#endif
#if false
int rc;
Console.WriteLine("none on");
// writeDataSPI(usb_dev_handle, 0x00);
writeDataReg(usb_dev_handle, 0x0);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
Thread.Sleep(2000);
Console.WriteLine("half on");
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
// writeDataSPI(usb_dev_handle, 0x55);
writeDataReg(usb_dev_handle, 0x55);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
Thread.Sleep(2000);
Console.WriteLine("other half on");
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
writeDataReg(usb_dev_handle, 0xaa);
// writeDataSPI(usb_dev_handle, 0xaa);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
Thread.Sleep(2000);
Console.WriteLine("all on");
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
// Console.WriteLine("clear_halt rc=" + rc);
writeDataReg(usb_dev_handle, 0xff);
// writeDataSPI(usb_dev_handle, 0xff);
Thread.Sleep(1000);
// rc = libUSB_Interface.usb_clear_halt(usb_dev_handle, 0);
//Console.WriteLine("clear_halt rc=" + rc);
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
status = readStatus(usb_dev_handle);
Console.WriteLine("Status: " + status.ToString("X"));
Thread.Sleep(2000);
#endif
}
}
static void Main(string[] args)
{
if ((args.Length != 4) || (args.Length == 0))
{
Console.WriteLine("usage: write_SPI <VID> <PID> <address in hex> <value in hex>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
if (args[2].Length > 2)
{
if (args[2].Substring(0, 2) != "0x")
{
Console.WriteLine("You must addr in Hex (0x0)");
return;
}
else
{
args[2] = args[2].Substring(2);
}
}
else
{
Console.WriteLine("You must specify addr in Hex (0x0)");
return;
}
int addr = int.Parse(args[2], NumberStyles.HexNumber);
if (args[3].Length > 2)
{
if (args[3].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify value in Hex (0x0)");
return;
}
else
{
args[3] = args[3].Substring(2);
}
}
else
{
Console.WriteLine("You must specify value in Hex (0x0)");
return;
}
int value = int.Parse(args[3], NumberStyles.HexNumber);
libUSB_Interface.usb_bus bus;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
byte[] buf = new byte[1];
addr = addr & 0x3F;
buf[0] = (byte)value;
if ((OZY.Write_SPI(usb_dev_handle, 0, (byte)addr, OZY.SPI_EN_FPGA, (OZY.SPI_FMT_MSB | OZY.SPI_FMT_HDR_1), buf)))
{
Console.WriteLine("Wrote to address: " + addr + " : " + value);
}
else
{
Console.WriteLine("Failed to write address: " + addr);
}
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
public void run()
{
libUSB_Interface.usb_bus bus;
vid = 0xfffe;
pid = 0x7;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
// IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
bool rc;
rc = ResetDDS();
if (!rc)
{
System.Console.WriteLine("ResetDDS failed\n");
return;
}
while (true)
{
#if false
// this blob of code alternates all 0's, 1's, 10101..., 0101... to
// IC1 on the PIO board -- can be viewed at JP2 of the PIO board
//
Console.WriteLine("Latching all 0's");
LatchRegister(PIO_IC1, 0);
Thread.Sleep(10000);
Console.WriteLine("Latching all 1's");
LatchRegister(PIO_IC1, 0x7f);
Thread.Sleep(10000);
Console.WriteLine("Latching all 1010101");
LatchRegister(PIO_IC1, 0x55);
Thread.Sleep(10000);
Console.WriteLine("Latching all 0101010");
LatchRegister(PIO_IC1, 0x2a);
Thread.Sleep(10000);
#endif
#if true
Console.WriteLine("----------------------------------------------- Tuning 10 Mhz");
long tuning_word = FreqToTuningWord(10000000);
DDSTune(tuning_word);
Thread.Sleep(10000);
Console.WriteLine("----------------------------------------------- Tuning 10 000 010 hz");
tuning_word = FreqToTuningWord(10000010);
DDSTune(tuning_word);
Thread.Sleep(10000);
Console.WriteLine("----------------------------------------------- Tuning 5 Mhz");
tuning_word = FreqToTuningWord(5000000);
DDSTune(tuning_word);
Thread.Sleep(10000);
#endif
}
#if false
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
#endif
}
static void Main(string[] args)
{
if ((args.Length != 3) || (args.Length == 0))
{
Console.WriteLine("usage: read_SPI <VID> <PID> <address in hex>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
if (args[2].Length > 2)
{
if (args[2].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify addr in Hex (0x0)");
return;
}
else
{
args[2] = args[2].Substring(2);
}
}
else
{
Console.WriteLine("You must specify addr in Hex (0x0)");
return;
}
int addr = int.Parse(args[2], NumberStyles.HexNumber);
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
libUSB_Interface.usb_bus bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
byte[] buf = new byte[1];
buf[0] = 0x00;
addr = addr | 0x40;
if ((OZY.Read_SPI(usb_dev_handle, 0, (byte)addr, OZY.SPI_EN_FPGA, OZY.SPI_FMT_MSB | OZY.SPI_FMT_HDR_1, ref buf)))
{
Console.WriteLine("Read from address " + addr.ToString("X") + " : " + buf[0].ToString("X"));
Console.WriteLine("");
}
else
{
Console.WriteLine("Failed to read address " + addr);
}
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
static void Main(string[] args)
{
if ((args.Length != 2) || (args.Length == 0))
{
Console.WriteLine("usage: program_OZYEEPROM <VID> <PID>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
libUSB_Interface.usb_bus bus;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
byte[] buf = new byte[8];
int i2c_addr = 0x51; // address of 24LC128 EEPROM
buf[0] = 0xC0; // C0 load
buf[1] = 0xFE; // low byte of VID
buf[2] = 0xFF; // high byte of VID
buf[3] = 0xFF; // low byte of PID
buf[4] = 0x00; // high byte of PID
buf[5] = 0x01; // low byte of DID <-- revision number
buf[6] = 0x00; // high byte of DID
buf[7] = 0x00; // configuration byte
if ((OZY.Write_EEPROM(usb_dev_handle, i2c_addr, 0x00, buf)))
{
Console.WriteLine("Programming Successful!");
}
else
{
Console.WriteLine("Failed to program EEPROM");
}
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
static void Main(string[] args)
{
if ((args.Length != 4) || (args.Length == 0))
{
Console.WriteLine("usage: read_I2C <VID> <PID> <i2c_address in hex> <length in hex>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
if (args[2].Length > 2)
{
if (args[2].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify i2c_addr in Hex (0x0)");
return;
}
else
{
args[2] = args[2].Substring(2);
}
}
else
{
Console.WriteLine("You must specify i2c_addr in Hex (0x0)");
return;
}
int i2c_addr = int.Parse(args[2], NumberStyles.HexNumber);
if (args[3].Length > 2)
{
if (args[3].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify length in Hex (0x0)");
return;
}
else
{
args[3] = args[3].Substring(2);
}
}
else
{
Console.WriteLine("You must specify length in Hex (0x0)");
return;
}
int length = int.Parse(args[3], NumberStyles.HexNumber);
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
libUSB_Interface.usb_bus bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
byte[] buf = new byte[length];
if ((OZY.Read_I2C(usb_dev_handle, i2c_addr, ref buf)))
{
Console.WriteLine("Read from address " + i2c_addr + ":");
for (int i = 0; i < buf.Length; i++)
{
Console.Write(buf[i] + ":");
}
Console.WriteLine("");
}
else
{
Console.WriteLine("Failed to read address " + i2c_addr);
}
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
static void Main(string[] args)
{
if ((args.Length != 4) || (args.Length == 0))
{
Console.WriteLine("usage: set_LED <VID> <PID> <which_led = 0|1> <state = ON|OFF>");
return;
}
if (args[0].Length > 2)
{
if (args[0].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
else
{
args[0] = args[0].Substring(2);
}
}
else
{
Console.WriteLine("You must specify VID in Hex (0x0)");
return;
}
int vid = int.Parse(args[0], NumberStyles.HexNumber);
if (args[1].Length > 2)
{
if (args[1].Substring(0, 2) != "0x")
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
else
{
args[1] = args[1].Substring(2);
}
}
else
{
Console.WriteLine("You must specify PID in Hex (0x0)");
return;
}
int pid = int.Parse(args[1], NumberStyles.HexNumber);
int which = int.Parse(args[2], NumberStyles.HexNumber);
if (which > 1 || which < 0)
{
Console.WriteLine("Valid values for which_led are 0 or 1");
return;
}
bool state;
if (args[3] == "ON" ||
args[3] == "on" ||
args[3] == "On" ||
args[3] == "1" ||
args[3] == "true" ||
args[3] == "TRUE" ||
args[3] == "True")
{
state = true;
}
else if (args[3] == "OFF" ||
args[3] == "off" ||
args[3] == "Off" ||
args[3] == "0" ||
args[3] == "false" ||
args[3] == "FALSE" ||
args[3] == "False")
{
state = false;
}
else
{
Console.WriteLine("Valid values for state are ON or OFF");
return;
}
libUSB_Interface.usb_bus bus;
try
{
libUSB_Interface.usb_init();
Console.WriteLine("finding busses...");
libUSB_Interface.usb_find_busses();
Console.WriteLine("finding devices...");
libUSB_Interface.usb_find_devices();
Console.WriteLine("usb_get_busses...");
bus = libUSB_Interface.usb_get_busses();
Console.WriteLine("bus location: " + bus.location.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Checking for VID PID...");
libUSB_Interface.usb_device fdev = USB.FindDevice(bus, vid, pid);
if (fdev != null)
{
Console.WriteLine("Found VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
}
else
{
Console.WriteLine("did not find VID PID: " + vid.ToString("x") + " " + pid.ToString("x"));
return;
}
Console.WriteLine("Trying to open device...");
IntPtr usb_dev_handle;
try
{
usb_dev_handle = libUSB_Interface.usb_open(fdev);
Console.WriteLine("Device handle is: " + usb_dev_handle.ToString());
}
catch (Exception e)
{
Console.WriteLine("An error occurred: " + e.Message);
return;
}
Console.WriteLine("Setting LED " + which.ToString() + " " + state.ToString());
OZY.Set_LED(usb_dev_handle, which, state);
Console.WriteLine("Closing device...");
libUSB_Interface.usb_close(usb_dev_handle);
Console.WriteLine("done...");
}
