private void DrawFormXObject(XGraphics gfx, int number)
{
base.BeginBox(gfx, number, "DrawImage (Form XObject)");
XImage xImage = XImage.FromFile("../../../../../PDFs/SomeLayout.pdf");
gfx.TranslateTransform(125.0, 70.0);
gfx.ScaleTransform(0.35);
gfx.TranslateTransform(-125.0, -70.0);
double num = (double)(xImage.PixelWidth * 72) / xImage.HorizontalResolution;
double num2 = (double)(xImage.PixelHeight * 72) / xImage.HorizontalResolution;
gfx.DrawImage(xImage, (250.0 - num) / 2.0, (140.0 - num2) / 2.0, num, num2);
base.EndBox(gfx);
}
private void DrawImageSheared(XGraphics gfx, int number)
{
base.BeginBox(gfx, number, "DrawImage (sheared)");
XImage xImage = XImage.FromFile("../../../../../../dev/XGraphicsLab/images/Z3.jpg");
gfx.TranslateTransform(125.0, 70.0);
gfx.ScaleTransform(-0.7, 0.7);
gfx.ShearTransform(-0.4, -0.3);
gfx.TranslateTransform(-125.0, -70.0);
double num = (double)(xImage.PixelWidth * 72) / xImage.HorizontalResolution;
double height = (double)(xImage.PixelHeight * 72) / xImage.HorizontalResolution;
gfx.DrawImage(xImage, (250.0 - num) / 2.0, 0.0, num, height);
base.EndBox(gfx);
}
private void BeginBox(XGraphics gfx, int number, string title)
{
const int dEllipse = 15;
XRect rect = new XRect(0, 20, 300, 200);
if (number % 2 == 0)
{
rect.X = 300 - 5;
}
rect.Y = 40 + ((number - 1) / 2) * (200 - 5);
rect.Inflate(-10, -10);
XRect rect2 = rect;
rect2.Offset(2, 2);
XColor xColor1 = XColors.DarkGoldenrod;
XColor xColor2 = XColors.Chocolate;
gfx.DrawRoundedRectangle(new XSolidBrush(XColor.FromArgb(9, XColors.DarkGoldenrod)), rect2, new XSize(dEllipse + 8, dEllipse + 8));
XLinearGradientBrush brush = new XLinearGradientBrush(rect, xColor1, xColor2, XLinearGradientMode.Vertical);
gfx.DrawRoundedRectangle(brush, rect, new XSize(dEllipse, dEllipse));
rect.Inflate(-5, -5);
XFont font = new XFont("Verdana", 14, XFontStyle.Bold);
gfx.DrawString(title, font, XBrushes.Black, rect, XStringFormats.TopCenter);
rect.Inflate(-10, -5);
rect.Y += 20;
rect.Height -= 20;
gfx.Save();
gfx.TranslateTransform(rect.X, rect.Y);
}
public void DrawBox(XGraphics gfx, XRect rect, XPen borderPen)
{
//int dEllipse = 15;
//XRect rect = new XRect(75, 130, 400, 300);
//if (number % 2 == 0)
// rect.X = 300 - 5;
//rect.Y = 40 + ((number - 1) / 2) * (200 - 5);
//rect.Inflate(-10, -10);
//XRect rect2 = rect;
//rect2.Offset(this.borderWidth, this.borderWidth);
gfx.DrawRectangle(borderPen, rect);
//gfx.DrawRoundedRectangle(this.borderPen, new XSolidBrush(this.backColor), rect, new XSize(dEllipse, dEllipse));
//rect.Inflate(-5, -5);
//XFont font = new XFont("Verdana", 12, XFontStyle.Regular);
//gfx.DrawString(title, font, XBrushes.Black, rect, XStringFormat.CenterTop);
//rect.Inflate(-10, -5);
//rect.Y += 20;
//rect.Height -= 20;
//gfx.DrawRectangle(XPens.Red, rect);
this._state = gfx.Save();
gfx.TranslateTransform(rect.X, rect.Y);
SetBoxX(0);
SetBoxY(0);
}
/// <summary>
/// Draws a clock on a square page.
/// Inspired by Charles Petzold's AnalogClock sample in
/// 'Programming Microsoft Windows with C#'.
/// </summary>
void RenderClock(XGraphics gfx)
{
// Clocks should always look happy on hardcopies...
//this.time = new DateTime(2005, 1, 1, 11, 6, 22, 500);
XColor strokeColor = XColors.DarkBlue;
XColor fillColor = XColors.DarkOrange;
XPen pen = new XPen(strokeColor, 5);
XBrush brush = new XSolidBrush(fillColor);
strokeColor.A = 0.8;
fillColor.A = 0.8;
XPen handPen = new XPen(strokeColor, 5);
XBrush handBrush = new XSolidBrush(fillColor);
DrawText(gfx, pen, brush);
double width = gfx.PageSize.Width;
double height = gfx.PageSize.Height;
gfx.TranslateTransform(width / 2, height / 2);
double scale = Math.Min(width, height);
gfx.ScaleTransform(scale / 2000);
DrawFace(gfx, pen, brush);
DrawHourHand(gfx, handPen, handBrush);
DrawMinuteHand(gfx, handPen, handBrush);
DrawSecondHand(gfx, new XPen(XColors.Red, 7));
}
public override void SetTransformation(double translateX, double translateY, double rotate, double scaleX, double scaleY)
{
// Revert to original state, and immediately put this state on the stack again.
XGraphics.Restore();
XGraphics.Save();
XGraphics.TranslateTransform(translateX, translateY);
if (rotate != 0.0)
{
XGraphics.RotateTransform(rotate / System.Math.PI * 180.0);
}
if (scaleX != 1.0 || scaleY != 1.0)
{
XGraphics.ScaleTransform(scaleX, scaleY);
}
}
public void BeginBox(XGraphics gfx, int number, string title)
{
XRect xRect = new XRect(0.0, 20.0, 300.0, 200.0);
bool flag = number % 2 == 0;
if (flag)
{
xRect.X = 295.0;
}
xRect.Y = (double)(40 + (number - 1) / 2 * 195);
xRect.Inflate(-10.0, -10.0);
XRect rect = xRect;
rect.Offset(this.borderWidth, this.borderWidth);
gfx.DrawRoundedRectangle(new XSolidBrush(this.shadowColor), rect, new XSize(23.0, 23.0));
XLinearGradientBrush brush = new XLinearGradientBrush(xRect, this.backColor, this.backColor2, XLinearGradientMode.Vertical);
gfx.DrawRoundedRectangle(this.borderPen, brush, xRect, new XSize(15.0, 15.0));
xRect.Inflate(-5.0, -5.0);
XFont font = new XFont("Verdana", 12.0, XFontStyle.Regular);
gfx.DrawString(title, font, XBrushes.Navy, xRect, XStringFormats.TopCenter);
xRect.Inflate(-10.0, -5.0);
xRect.Y += 20.0;
xRect.Height -= 20.0;
this.state = gfx.Save();
gfx.TranslateTransform(xRect.X, xRect.Y);
}
public void BeginBox(XGraphics gfx, int number, string title)
{
const int dEllipse = 15;
XRect rect = new XRect(0, 20, 300, 200);
if (number % 2 == 0)
{
rect.X = 300 - 5;
}
rect.Y = 40 + ((number - 1) / 2) * (200 - 5);
rect.Inflate(-10, -10);
XRect rect2 = rect;
rect2.Offset(this.BorderWidth, this.BorderWidth);
gfx.DrawRoundedRectangle(new XSolidBrush(this.ShadowColor), rect2, new XSize(dEllipse + 8, dEllipse + 8));
XLinearGradientBrush brush = new XLinearGradientBrush(rect, this.BackColor, this.BackColor2, XLinearGradientMode.Vertical);
gfx.DrawRoundedRectangle(this.BorderPen, brush, rect, new XSize(dEllipse, dEllipse));
rect.Inflate(-5, -5);
XFont font = new XFont("Verdana", 12, XFontStyle.Regular);
gfx.DrawString(title, font, XBrushes.Navy, rect, XStringFormats.TopCenter);
rect.Inflate(-10, -5);
rect.Y += 20;
rect.Height -= 20;
this.state = gfx.Save();
gfx.TranslateTransform(rect.X, rect.Y);
}
public static void DrawImageOnPage(PdfPage page, XImage image, double x, double y, double page_rotation)
{
XGraphics gfx = XGraphics.FromPdfPage(page);
// there is a bug for landscape PDF files
Console.WriteLine("orientation {0}", page.Orientation);
if (page.Orientation == PdfSharp.PageOrientation.Landscape)
{
// Translate coordinate system. To solve a strange problem.
gfx.RotateTransform(-90);
gfx.TranslateTransform(-page.Height, 0);
}
// rotate
if (page_rotation != 0.0)
{
Console.WriteLine("rotate {0} degree", page_rotation);
XPoint centerPoint = new XPoint(page.Width / 2, page.Height / 2);
gfx.RotateAtTransform(-page_rotation, centerPoint);
}
gfx.DrawImage(image, x, y);
gfx.Dispose();
}
PdfPage CreateWaterMark(PdfPage page, string watermark)
{
// Variation 1: Draw watermark as text string
Gfx.Dispose();
// Get an XGraphics object for drawing beneath the existing content
XGraphics gfx = XGraphics.FromPdfPage(page, XGraphicsPdfPageOptions.Prepend);
// Get the size (in point) of the text
XSize size = gfx.MeasureString(watermark, font);
// Define a rotation transformation at the center of the page
gfx.TranslateTransform(10, -400);
// Create a string format
XStringFormat format = new XStringFormat();
format.Alignment = XStringAlignment.Near;
format.LineAlignment = XLineAlignment.Near;
// Create a dimmed red brush
XBrush brush = new XSolidBrush(XColor.FromArgb(128, 255, 0, 0));
// Draw the string
gfx.DrawString(watermark, font, brush,
new XPoint((page.Width - size.Width) / 2, (page.Height - size.Height) / 2),
format);
gfx.Dispose();
Gfx = XGraphics.FromPdfPage(Page);
return(page);
}
/// <summary>
/// Draws Arcs.
/// </summary>
void RenderArcs(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.Plum, 4.7);
gfx.DrawArc(pen, 0, 0, 250, 140, 190, 200);
}
/// <summary>
/// Demonstrates the use of XGraphics.DrawImage.
/// </summary>
public override void RenderPage(XGraphics gfx)
{
base.RenderPage(gfx);
XImage image = XImage.FromFile(@"..\..\images\Test (OS2).bmp");
double dx = gfx.PageSize.Width;
double dy = gfx.PageSize.Height;
#if true
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.RotateTransform(-60);
gfx.TranslateTransform(-dx / 2, -dy / 2);
#endif
gfx.DrawImage(image, (dx - image.PixelWidth) / 2, (dy - image.PixelHeight) / 2, image.PixelWidth, image.PixelHeight);
}
public override void RenderPage(XGraphics gfx)
{
base.RenderPage(gfx);
XImage image = XImage.FromFile(@"..\..\..\..\samples\PDFs\SomeLayout.pdf");
double dx = gfx.PageSize.Width;
double dy = gfx.PageSize.Height;
#if true
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.RotateTransform(-25);
gfx.TranslateTransform(-dx / 2, -dy / 2);
#endif
gfx.DrawImage(image, (dx - image.PixelWidth) / 2, (dy - image.PixelHeight) / 2, image.PixelWidth, image.PixelHeight);
}
/// <summary>
/// Source and more infos: http://www.math.dartmouth.edu/~dlittle/java/SpiroGraph/
/// </summary>
public override void RenderPage(XGraphics gfx)
{
base.RenderPage(gfx);
//int R = 60, r = 60, p = 60, N = 270; // Cardioid
//int R = 60, r = -45, p = -101, N = 270; // Rounded Square
//int R = 75, r = -25, p = 85, N = 270; // Gold fish
//int R = 75, r = -30, p = 60, N = 270; // Star fish
//int R = 100, r = 49, p = 66, N = 7; // String of Pearls
//int R = 90, r = 1, p = 105, N = 105; // Rotating Triangle
//int R = 90, r = 1, p = 105, N = 105;
int R = 60, r = 2, p = 122, N = 490;
int revs = Math.Abs(r) / Gcd(R, Math.Abs(r));
XPoint[] points = new XPoint[revs * N + 1];
for (int i = 0; i <= revs * N; i++)
{
double t = 4 * i * Math.PI / N;
points[i].X = ((R + r) * Math.Cos(t) - p * Math.Cos((R + r) * t / r));
points[i].Y = ((R + r) * Math.Sin(t) - p * Math.Sin((R + r) * t / r));
}
#if true
// Draw as lines
gfx.TranslateTransform(300, 250);
gfx.DrawLines(properties.Pen2.Pen, points);
//gfx.DrawPolygon(properties.Pen2.Pen, properties.Brush2.Brush, points, properties.General.FillMode);
// Draw as closed curve
gfx.TranslateTransform(0, 400);
gfx.DrawClosedCurve(properties.Pen2.Pen, properties.Brush2.Brush, points, properties.General.FillMode,
properties.General.Tension);
#else
gfx.TranslateTransform(300, 400);
XSolidBrush dotBrush = new XSolidBrush(properties.Pen2.Pen.Color);
float width = properties.Pen2.Width;
for (int i = 0; i < revs * N; i++)
{
gfx.DrawEllipse(dotBrush, points[i].X, points[i].Y, width, width);
}
#endif
}
private void DrawWaterMark(int wx, int wy, string wText, XFont wFont, Color wColor)
{
XSize sf = gfx.MeasureString(wText, wFont);
gfx.TranslateTransform(wx / 2, wy / 2);
//double Agle = -Math.Atan(wy / wx) * 180 / Math.PI;
//gfx.RotateTransform((float)Agle);
//gfx.TranslateTransform(-wx / 2, -wy / 2);
XStringFormat wformat = new XStringFormat();
wformat.Alignment = XStringAlignment.Near;
wformat.LineAlignment = XLineAlignment.Near;
// XBrush wbrush = new XSolidBrush(Color.FromArgb(20, Color.Black));
XBrush wbrush = new XSolidBrush(Color.FromArgb(20, wColor));
wx = (int)(wx - sf.Width) / 2;
wy = (int)(wy - sf.Height) / 2;
XPoint Point_xy = new XPoint(wx, wy);
//gfx.DrawString(wText, wFont, wbrush, Point_xy, wformat);
// OUTLINED METHOD
// System.Drawing.Drawing2D.GraphicsPath path = new System.Drawing.Drawing2D.GraphicsPath();
// StringFormat wformat2 = new StringFormat();
// wformat2.Alignment = StringAlignment.Near;
// wformat2.LineAlignment = StringAlignment.Near;
Point Point_xy2 = new Point(wx, wy);
// path.AddString(wText, new FontFamily("Arial"), (int)FontStyle.Italic, 120, Point_xy2, wformat2);
// Pen pen = new Pen(Color.FromArgb(64,Color.Black), 3);
//gfx.Graphics.DrawPath(pen, path);
XGraphicsPath path = new XGraphicsPath();
path.AddString(wText, wFont.FontFamily, XFontStyle.Italic, 103, Point_xy2, wformat);
Pen pen = new Pen(Color.FromArgb(64, wColor), 3);
//e.Graphics.DrawPath(pen, path);
gfx.DrawPath(pen, path);
}
void RenderPolygons(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.DarkBlue, 2.5);
gfx.DrawPolygon(pen, XBrushes.LightCoral, GeometryObjects.GetPentagram(50, new XPoint(60, 70)), XFillMode.Winding);
gfx.DrawPolygon(pen, XBrushes.LightCoral, GeometryObjects.GetPentagram(50, new XPoint(180, 70)), XFillMode.Alternate);
}
/// <summary>
/// Draws curves.
/// </summary>
void RenderCurves(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPoint[] points = { new XPoint(20, 30), new XPoint(60, 120), new XPoint(90, 20), new XPoint(170, 90), new XPoint(230, 40) };
XPen pen = new XPen(XColors.RoyalBlue, 3.5);
gfx.DrawCurve(pen, points, 1);
}
/// <summary>
/// Demonstrates the use of XGraphics.SetClip.
/// </summary>
public override void RenderPage(XGraphics gfx)
{
base.RenderPage(gfx);
gfx.Save();
gfx.TranslateTransform(50, 50);
gfx.IntersectClip(new Rectangle(0, 0, 400, 250));
gfx.TranslateTransform(50, 50);
//gfx.Clear(XColor.GhostWhite);
gfx.DrawEllipse(XPens.Green, XBrushes.Yellow, 40, 40, 500, 500);
gfx.Restore();
gfx.Save();
//gfx.Transform = new XMatrix(); //XMatrix.Identity;
gfx.TranslateTransform(200, 200);
gfx.IntersectClip(new Rectangle(0, 0, 400, 250));
gfx.DrawEllipse(XPens.Green, XBrushes.Yellow, 40, 40, 500, 500);
gfx.Restore();
}
void RenderClosedCurves(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.DarkBlue, 2.5);
gfx.DrawClosedCurve(pen, XBrushes.SkyBlue,
new XPoint[] { new XPoint(10, 120), new XPoint(80, 30), new XPoint(220, 20), new XPoint(170, 110), new XPoint(100, 90) },
XFillMode.Winding, 0.7);
}
/// <summary>
/// Draws a form XObject (a page from an external PDF file).
/// </summary>
void DrawFormXObject(XGraphics gfx, int number)
{
BeginBox(gfx, number, "DrawImage (Form XObject)");
var image = XImage.FromFile(PdfSamplePath);
const double dx = 250, dy = 140;
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.ScaleTransform(0.35);
gfx.TranslateTransform(-dx / 2, -dy / 2);
var width = image.PixelWidth * 72 / image.HorizontalResolution;
var height = image.PixelHeight * 72 / image.HorizontalResolution;
gfx.DrawImage(image, (dx - width) / 2, (dy - height) / 2, width, height);
EndBox(gfx);
}
/// <summary>
/// Draws an image transformed.
/// </summary>
void DrawImageRotated(XGraphics gfx, int number)
{
BeginBox(gfx, number, "DrawImage (rotated)");
var image = XImage.FromFile(JpegSamplePath);
const double dx = 250, dy = 140;
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.ScaleTransform(0.7);
gfx.RotateTransform(-25);
gfx.TranslateTransform(-dx / 2, -dy / 2);
var width = image.PixelWidth * 72 / image.HorizontalResolution;
var height = image.PixelHeight * 72 / image.HorizontalResolution;
gfx.DrawImage(image, (dx - width) / 2, 0, width, height);
EndBox(gfx);
}
private static void RenderToGraphics(Render.RenderContext ctx, int rot, float translateX, float translateY, XGraphics graphics)
{
graphics.TranslateTransform(translateX, translateY);
graphics.RotateTransform(rot * 90);
using (Maps.Rendering.RenderUtil.SaveState(graphics))
{
if (ctx.clipPath != null)
{
XMatrix m = ctx.ImageSpaceToWorldSpace;
graphics.MultiplyTransform(m);
graphics.IntersectClip(ctx.clipPath);
m.Invert();
graphics.MultiplyTransform(m);
}
ctx.graphics = graphics;
Maps.Rendering.Render.RenderTile(ctx);
}
if (ctx.border && ctx.clipPath != null)
{
using (Maps.Rendering.RenderUtil.SaveState(graphics))
{
// Render border in world space
XMatrix m = ctx.ImageSpaceToWorldSpace;
graphics.MultiplyTransform(m);
XPen pen = new XPen(ctx.styles.imageBorderColor, 0.2f);
// PdfSharp can't ExcludeClip so we take advantage of the fact that we know
// the path starts on the left edge and proceeds clockwise. We extend the
// path with a counterclockwise border around it, then use that to exclude
// the original path's region for rendering the border.
ctx.clipPath.Flatten();
RectangleF bounds = PathUtil.Bounds(ctx.clipPath);
bounds.Inflate(2 * (float)pen.Width, 2 * (float)pen.Width);
List <byte> types = new List <byte>(ctx.clipPath.Internals.GdiPath.PathTypes);
List <PointF> points = new List <PointF>(ctx.clipPath.Internals.GdiPath.PathPoints);
PointF key = points[0];
points.Add(new PointF(bounds.Left, key.Y)); types.Add(1);
points.Add(new PointF(bounds.Left, bounds.Bottom)); types.Add(1);
points.Add(new PointF(bounds.Right, bounds.Bottom)); types.Add(1);
points.Add(new PointF(bounds.Right, bounds.Top)); types.Add(1);
points.Add(new PointF(bounds.Left, bounds.Top)); types.Add(1);
points.Add(new PointF(bounds.Left, key.Y)); types.Add(1);
points.Add(new PointF(key.X, key.Y)); types.Add(1);
XGraphicsPath path = new XGraphicsPath(points.ToArray(), types.ToArray(), XFillMode.Winding);
graphics.IntersectClip(path);
graphics.DrawPath(pen, ctx.clipPath);
}
}
}
void RenderGIFs(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XImage image = XImage.FromFile("Test.gif");
// Left position in point
double x = (250 - image.PixelWidth * 72 / image.HorizontalResolution) / 2;
gfx.DrawImage(image, x, 0);
}
static void DrawFormXObject(XGraphics gfx, int number)
{
//this.backColor = XColors.LightSalmon;
BeginBox(gfx, number, "DrawImage (Form XObject)");
XImage image = XImage.FromFile(pdfSamplePath);
const double dx = 250, dy = 140;
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.ScaleTransform(0.35);
gfx.TranslateTransform(-dx / 2, -dy / 2);
double width = image.PixelWidth * 72 / image.HorizontalResolution;
double height = image.PixelHeight * 72 / image.HorizontalResolution;
gfx.DrawImage(image, (dx - width) / 2, (dy - height) / 2, width, height);
EndBox(gfx);
}
void DrawImageSheared(XGraphics gfx, int number)
{
BeginBox(gfx, number, "DrawImage (sheared)");
XImage image = XImage.FromFile(jpegSamplePath);
const double dx = 250, dy = 140;
gfx.TranslateTransform(dx / 2, dy / 2);
gfx.ScaleTransform(-0.7, 0.7);
gfx.ShearTransform(-0.4, -0.3);
gfx.TranslateTransform(-dx / 2, -dy / 2);
double width = image.PixelWidth * 72 / image.HorizontalResolution;
double height = image.PixelHeight * 72 / image.HorizontalResolution;
gfx.DrawImage(image, (dx - width) / 2, 0, width, height);
EndBox(gfx);
}
void RenderRectangles(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.Navy, Math.PI);
gfx.DrawRectangle(pen, 10, 0, 100, 60);
gfx.DrawRectangle(XBrushes.DarkOrange, 130, 0, 100, 60);
gfx.DrawRectangle(pen, XBrushes.DarkOrange, 10, 80, 100, 60);
gfx.DrawRectangle(pen, XBrushes.DarkOrange, 150, 80, 60, 60);
}
/// <summary>
/// Draws Bézier curves.
/// </summary>
void RenderBéziers(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPoint[] points = { new XPoint(20, 30), new XPoint(40, 120), new XPoint(80, 20), new XPoint(110, 90),
new XPoint(180, 40), new XPoint(210, 40), new XPoint(220, 80) };
XPen pen = new XPen(XColors.Firebrick, 4);
//pen.DashStyle = XDashStyle.Dot;
gfx.DrawBeziers(pen, points);
}
void RenderRoundedRectangles(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.RoyalBlue, Math.PI);
gfx.DrawRoundedRectangle(pen, 10, 0, 100, 60, 30, 20);
gfx.DrawRoundedRectangle(XBrushes.Orange, 130, 0, 100, 60, 30, 20);
gfx.DrawRoundedRectangle(pen, XBrushes.Orange, 10, 80, 100, 60, 30, 20);
gfx.DrawRoundedRectangle(pen, XBrushes.Orange, 150, 80, 60, 60, 20, 20);
}
void RenderPies(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XPen pen = new XPen(XColors.DarkBlue, 2.5);
gfx.DrawPie(pen, 10, 0, 100, 90, -120, 75);
gfx.DrawPie(XBrushes.Gold, 130, 0, 100, 90, -160, 150);
gfx.DrawPie(pen, XBrushes.Gold, 10, 50, 100, 90, 80, 70);
gfx.DrawPie(pen, XBrushes.Gold, 150, 80, 60, 60, 35, 290);
}
void RenderGlyphsPath(XGraphics gfx)
{
gfx.TranslateTransform(15, 20);
XGraphicsPath path = new XGraphicsPath();
//path.AddString("Hello!", new XFontFamily("Times New Roman"), XFontStyle.BoldItalic, 100, new XRect(0, 0, 250, 140),
// XStringFormat.Center);
path.AddString("Hello!", new XFontFamily("Times New Roman"), XFontStyle.BoldItalic, 100, new XRect(0, 0, 250, 140), XStringFormats.Center);
gfx.DrawPath(new XPen(XColors.Purple, 2.3), XBrushes.DarkOrchid, path);
}