private void Config_RunView()
{
/// 配置运行界面
///
/// 配置编辑界面
/// 左侧的树形结构
// 设置退出键位置
ViewCaoZuo.Object_Position(0.95, 0.01, 0.05, 0.05, button_exit, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.01, 0.1, 0.95, treeview1, this.Controls);
// 运行界面
RunPanel.BorderStyle = BorderStyle.Fixed3D;
ViewCaoZuo.Object_Position(0.12, 0.01, 0.8, 0.95, RunPanel, this.Controls);
// 编辑树形结构
TreeNode viewnode = new TreeNode();
treeview1.AfterSelect += new TreeViewEventHandler(TreeView_Right_Click);
treeview1.ContextMenuStrip = contextMenuStrip_viewnoderightmenu;
viewnode.Text = "画面";
viewnode.Name = "画面";
treeview1.Nodes.Add(viewnode);
Reflush_TreeView_ViewNode(viewnode);
}
private void MainView_Load(object sender, EventArgs e)
{
ViewCaoZuo.Max_Form(this);
ViewCaoZuo.Object_Position(0.1, 0.1, 0.8, 0.85, panel1, this.Controls);
label_username.Text = Login.username;
label_passion.Text = Login.passion;
}
private void init_view()
{
ViewCaoZuo.Object_Position(0.01, 0.01, 0.1, 0.9, treeView_main, this.Controls);
ViewCaoZuo.Object_Position(0.12, 0.01, 0.8, 0.9, panel_subview, this.Controls);
ViewCaoZuo.Object_Position(0.92, 0.01, 0.06, 0.04, button_close, this.Controls);
ViewCaoZuo.Show_Form_In_Panel(zongmao1, panel_subview);
// 总貌的进去详细页面的事件
zongmao1.EnterToXiangxi += new EventHandler(ChangeToXiangxi);
}
// 初始化画面
private void _init_view()
{
//标题
控件.Title title = new 控件.Title("除尘脱硫自动控制系统");
ViewCaoZuo.Object_Position(0, 0, 1, 0.1, title, this.Controls);
// 退出控钮
控件.ExitButton exitbutton = new 控件.ExitButton();
ViewCaoZuo.Object_Position(0.85, 0.1, 0.15, 0.1, exitbutton, this.Controls);
// 选项标签
ViewCaoZuo.Object_Position(0, 0.1, 0.85, 0.9, tabControl1, this.Controls);
}
public void ReSet_Device_Info()
{
// 总貌中显示设备的信息
// 按照设备号进行排列
for (int i = 0; i < 6; i++)
{
int count = tabControl1.TabPages[i].Controls.Count;
for (int j = 0; j < count; j++)
{
Control control = (Control)tabControl1.TabPages[i].Controls[0];
tabControl1.TabPages[i].Controls.Remove(control);
control.Dispose();
}
for (int j = 1; j <= 12; j++)
{
try
{
int machine_num = i * 12 + j;
string where_cmd = "Address='" + machine_num.ToString() + "'";
DataTable dt_machine = MainView.builder.Select_Table("Device_Info", where_cmd);
DataRow dr = dt_machine.Rows[0];
if (dr[3].ToString() == "溢流缸")
{
if (machine_num > 65)
{
MessageBox.Show("超过最大限制，请联系厂家升级！");
}
YiLiuGang_Item item = new YiLiuGang_Item();
item.MyClick += new EventHandler(Click_Yiliu);
item.Set_Title(dr[0].ToString());
ViewCaoZuo.Object_Position(0 + ((j - 1) % 4) * 0.25, 0.01 + ((j - 1) / 4) * 0.31, 0.24, 0.3, item, tabControl1.TabPages[i].Controls);
}
if (dr[3].ToString() == "气流缸")
{
if (machine_num > 65)
{
MessageBox.Show("超过最大限制，请联系厂家升级！");
}
QiLiuGang item = new QiLiuGang();
item.Set_Title(dr[0].ToString());
item.MyClick += new EventHandler(Click_Qiliu);
ViewCaoZuo.Object_Position(0 + ((j - 1) % 4) * 0.25, 0.01 + ((j - 1) / 4) * 0.31, 0.24, 0.3, item, tabControl1.TabPages[i].Controls);
}
}
catch { }
}
}
}
public void init_view()
{
ViewCaoZuo.Object_Position(0.01, 0.01, 0.25, 0.45, zongmaoItem1, this.Controls);
ViewCaoZuo.Object_Position(0.26, 0.01, 0.25, 0.45, zongmaoItem2, this.Controls);
ViewCaoZuo.Object_Position(0.52, 0.01, 0.25, 0.45, zongmaoItem3, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.5, 0.25, 0.45, zongmaoItem4, this.Controls);
ViewCaoZuo.Object_Position(0.26, 0.5, 0.25, 0.45, zongmaoItem5, this.Controls);
ViewCaoZuo.Object_Position(0.52, 0.5, 0.25, 0.45, zongmaoItem6, this.Controls);
zongmaoItem1.Enter_Xiangxi += new EventHandler(enter_xiangxi);
zongmaoItem2.Enter_Xiangxi += new EventHandler(enter_xiangxi);
zongmaoItem3.Enter_Xiangxi += new EventHandler(enter_xiangxi);
zongmaoItem4.Enter_Xiangxi += new EventHandler(enter_xiangxi);
zongmaoItem5.Enter_Xiangxi += new EventHandler(enter_xiangxi);
zongmaoItem6.Enter_Xiangxi += new EventHandler(enter_xiangxi);
}
public void init_view()
{
// 初始化画面
ViewCaoZuo.Object_Position(0, 0, 1, 0.05, label_title, this.Controls);
// 容器
ViewCaoZuo.Object_Position(0.01, 0.06, 0.95, 0.89, tabControl1, this.Controls);
for (int i = 0; i < 6; i++)
{
tabControl1.TabPages[i].Width = (int)(tabControl1.Width * 0.99);
tabControl1.TabPages[i].Height = (int)(tabControl1.Height * 0.99);
}
ReSet_Device_Info();
}
private void init_view()
{
comboBox_guochengzhonglei.Items.Clear();
comboBox_guochengzhonglei.Items.Add("结束");
comboBox_guochengzhonglei.Items.Add("取样");
comboBox_guochengzhonglei.Items.Add("出布");
comboBox_guochengzhonglei.Items.Add("自动暂停");
comboBox_guochengzhonglei.Items.Add("停泵取样");
comboBox_guochengzhonglei.Items.Add("进布");
textBox_pinlv.Text = zhubengpinlv;
textBox_tibu.Text = tibupinlv;
textBox_fengji.Text = fengjipinlv;
comboBox_guochengzhonglei.Text = gongyi_duan_name;
ViewCaoZuo.Object_Position(0, 0, 1, 0.2, label1, this.Controls); // 标题
ViewCaoZuo.Object_Position(0.1, 0.21, 0.2, 0.1, label3, this.Controls); // 下拉菜单
ViewCaoZuo.Object_Position(0.4, 0.21, 0.4, 0.1, comboBox_guochengzhonglei, this.Controls);
ViewCaoZuo.Object_Position(0.16, 0.35, 0.06, 0.1, pictureBox1, this.Controls); // 主泵频率
ViewCaoZuo.Object_Position(0.26, 0.35, 0.3, 0.1, label6, this.Controls);
ViewCaoZuo.Object_Position(0.49, 0.35, 0.3, 0.1, textBox_pinlv, this.Controls);
ViewCaoZuo.Object_Position(0.16, 0.5, 0.06, 0.1, pictureBox2, this.Controls); // 提布频率
ViewCaoZuo.Object_Position(0.26, 0.5, 0.3, 0.1, label7, this.Controls);
ViewCaoZuo.Object_Position(0.49, 0.5, 0.3, 0.1, textBox_tibu, this.Controls);
ViewCaoZuo.Object_Position(0.16, 0.65, 0.06, 0.1, pictureBox3, this.Controls); // 风机频率
ViewCaoZuo.Object_Position(0.26, 0.65, 0.3, 0.1, label8, this.Controls);
ViewCaoZuo.Object_Position(0.49, 0.65, 0.3, 0.1, textBox_fengji, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.89, 0.2, 0.1, button1, this.Controls); // 确认
ViewCaoZuo.Object_Position(0.3, 0.89, 0.2, 0.1, button2, this.Controls); // 上一条
ViewCaoZuo.Object_Position(0.6, 0.89, 0.2, 0.1, button3, this.Controls); // 下一条
}
private void Config_EditView()
{
/// 配置编辑界面
/// 左侧的树形结构
// 设置退出键位置
ViewCaoZuo.Object_Position(0.95, 0.01, 0.05, 0.05, button_exit, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.01, 0.1, 0.95, treeview1, this.Controls);
// 编辑区域
EditPanel.BorderStyle = BorderStyle.FixedSingle;
ViewCaoZuo.Object_Position(0.12, 0.1, 0.85, 0.85, EditPanel, this.Controls);
/// 加入画面选项
TreeNode viewnode = new TreeNode();
viewnode.Text = "画面";
viewnode.Name = "画面";
treeview1.Nodes.Add(viewnode);
/// 加入数据编辑选项
///
TreeNode dataconfignode = new TreeNode();
dataconfignode.Text = "数据编辑";
dataconfignode.Name = "数据编辑";
treeview1.Nodes.Add(dataconfignode);
// 右键选择菜单
treeview1.AfterSelect += new TreeViewEventHandler(TreeView_Right_Click);
treeview1.ContextMenuStrip = contextMenuStrip_viewnoderightmenu;
Reflush_TreeView_ViewNode(viewnode);
// 普通控件按钮
Button NormalControl = new Button();
NormalControl.Text = "普通控件";
NormalControl.Name = "NormalControlButton";
ViewCaoZuo.Object_Position(0.13, 0.02, 0.05, 0.05, NormalControl, this.Controls);
NormalControl.Click += new EventHandler(ShowNormalControlWindows);
}
private void init_view()
{
//this.BackColor = System.Drawing.Color.FromName("Blue");
ViewCaoZuo.Object_Position(0.05, 0.01, 0.8, 0.1, show_label, this.Controls);
button_num1.Text = "1";
ViewCaoZuo.Object_Position(0.01, 0.2, 0.2, 0.15, button_num1, this.Controls);
button_num1.Click += new EventHandler(Button1_Click);
button_num2.Text = "2";
ViewCaoZuo.Object_Position(0.01 + 0.3, 0.2, 0.2, 0.15, button_num2, this.Controls);
button_num2.Click += new EventHandler(Button1_Click);
button_num3.Text = "3";
ViewCaoZuo.Object_Position(0.01 + 0.3 * 2, 0.2, 0.2, 0.15, button_num3, this.Controls);
button_num3.Click += new EventHandler(Button1_Click);
}
public void init_view()
{
ViewCaoZuo.Object_Position(0.01, 0.1, 0.9, 0.35, chart1, this.Controls);
ViewCaoZuo.Object_Position(0.27, 0.5, 0.5, 0.49, dataGridView_craft, this.Controls);
ViewCaoZuo.Object_Position(0.78, 0.5, 0.05, 0.05, label_no1, this.Controls);
ViewCaoZuo.Object_Position(0.84, 0.5, 0.15, 0.05, comboBox1, this.Controls);
ViewCaoZuo.Object_Position(0.8, 0.6, 0.2, 0.03, button_read_gongyi, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.5, 0.25, 0.49, panel1, this.Controls);
//ViewCaoZuo.Object_Position(0.4, 0.6, 0.35, 0.35, panel2, this.Controls);
ViewCaoZuo.Object_Position(0.8, 0.65, 0.23, 0.34, panel3, this.Controls);
ViewCaoZuo.Object_Position(0.9, 0.01, 0.09, 0.05, button_return, this.Controls);
}
private void init_view()
{
ViewCaoZuo.Object_Position(0, 0, 1, 0.2, label1, this.Controls); // 标题
ViewCaoZuo.Object_Position(0, 0.2, 1, 0.2, chart1, this.Controls); // 图表
ViewCaoZuo.Object_Position(0.01, 0.4, 0.2, 0.1, label2, this.Controls); // 起始温度
ViewCaoZuo.Object_Position(0.21, 0.4, 0.2, 0.1, textBox_startwendu, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.5, 0.2, 0.1, label3, this.Controls); // 目标温度
ViewCaoZuo.Object_Position(0.21, 0.5, 0.2, 0.1, textBox_endwendu, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.6, 0.2, 0.1, label4, this.Controls); // 降温速率
ViewCaoZuo.Object_Position(0.21, 0.6, 0.2, 0.1, textBox_sulv, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.7, 0.2, 0.1, label5, this.Controls); // 降温时间
ViewCaoZuo.Object_Position(0.21, 0.7, 0.2, 0.1, textBox_time, this.Controls);
}
public static bool[] chuanganqi_connect_is = new bool[400]; // 传感器是否连接上
public Form1()
{
InitializeComponent();
ViewCaoZuo.Max_Form(this);
ViewCaoZuo.Object_Position(0.94, 0.05, 0.05, 0.04, button_exit, this.Controls);
ViewCaoZuo.Object_Position(0.94, 0.10, 0.05, 0.04, button1, this.Controls);
ViewCaoZuo.Object_Position(0.94, 0.15, 0.05, 0.04, button2, this.Controls);
ViewCaoZuo.Object_Position(0.94, 0.20, 0.05, 0.04, button3, this.Controls);
ViewCaoZuo.Object_Position(0.94, 0.25, 0.05, 0.04, button4, this.Controls);
// 换页
allsubview.Clear();
for (int i = 1; i <= 16; i++)
{
SubView subview = new SubView();
subview.Set_Machine_Num(i);
ViewCaoZuo.Object_Position(0.01 + (i - 1) % 4 * 0.2, 0.05 + (i - 1) / 4 * 0.2, 0.19, 0.19, subview, this.Controls);
allsubview.Add(subview);
}
/// 建立数个ip客户端，用以连接
///
for (int i = 1; i < 100; i++)
{
try
{
string address_string = SubView.inifile.IniReadValue("station_ip", i.ToString());
IPAddress ip = IPAddress.Parse(address_string);
TcpServerClient client = new TcpServerClient(address_string, 8880);
allclient.Add(client);
client.Data_Arrival_Event += new EventHandler(DataArrival);
}
catch { }
}
}
private void init_view()
{
ViewCaoZuo.Object_Position(0.40, 0.01, 0.2, 0.1, label_title, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.13, 0.98, 0.3, panel_chart, this.Controls);
ViewCaoZuo.Object_Position(0, 0, 1, 1, chart1, panel_chart.Controls);
ViewCaoZuo.Object_Position(0.01, 0.44, 0.98, 0.05, panel_caozuo, this.Controls);
ViewCaoZuo.Object_Position(0, 0, 0.1, 0.90, button_qian1hour, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.1, 0, 0.1, 0.9, button_qian5min, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.2, 0, 0.1, 0.9, button_now, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.3, 0, 0.1, 0.9, button_next5min, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.4, 0, 0.1, 0.9, button_next1hour, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.55, 0, 0.3, 0.9, dateTimePicker_search, panel_caozuo.Controls);
ViewCaoZuo.Object_Position(0.01, 0.5, 0.4, 0.49, groupBox1, this.Controls);
}
public static View.ProjectManager projectmanager = new View.ProjectManager(); // 项目管理配置
public Form1()
{
InitializeComponent();
// 初始化
projectmanager.TopLevel = false;
// 最开始显示的是工程管理界面
Show_View(projectmanager);
// 新建数据库
master_sql_builder.Create_Database("MyMES");
// 设置比例
ViewCaoZuo.Max_Form(this);
ViewCaoZuo.Object_Position(0, 0, 0.1, 1, treeView_select, this.Controls);
ViewCaoZuo.Object_Position(0.12, 0.08, 0.8, 0.9, panel_view, this.Controls);
string[] a = FileCaozuo.Read_All_Line(Project_Config_File);
if (a != null)
{
// 当配置文件不为空时
}
}
private void init_view()
{
// 模拟量
ViewCaoZuo.Object_Position(0.01, 0.01, 0.5, 0.5, pictureBox1, this.Controls); // 机缸图片
ViewCaoZuo.Object_Position(0.53, 0.01, 0.4, 0.12, label1, this.Controls); // 机缸标题
ViewCaoZuo.Object_Position(0.53, 0.13, 0.45, 0.12, label_mengcheng, this.Controls); // 机缸名称
ViewCaoZuo.Object_Position(0.01, 0.53, 0.3, 0.12, label_wendu, this.Controls); // 温度标签
ViewCaoZuo.Object_Position(0.3, 0.53, 0.3, 0.12, myLabel_wendu, this.Controls); // 温度显示
ViewCaoZuo.Object_Position(0.01, 0.65, 0.3, 0.12, label_jigangshuiwei, this.Controls); // 水位标签
ViewCaoZuo.Object_Position(0.3, 0.65, 0.3, 0.12, myLabel_div10_shuiwei, this.Controls); // 水位显示
ViewCaoZuo.Object_Position(0.01, 0.77, 0.3, 0.12, label_duanshi, this.Controls); // 工艺时长标签
ViewCaoZuo.Object_Position(0.3, 0.77, 0.4, 0.12, myLabel_time_gongyi, this.Controls); // 工艺运行时长显示
ViewCaoZuo.Object_Position(0.01, 0.89, 0.3, 0.12, label_zongyunxingshijian, this.Controls); // 总时长标签
ViewCaoZuo.Object_Position(0.3, 0.89, 0.4, 0.12, myLabel_time_zong, this.Controls); // 总时长显示
// 开关量
ViewCaoZuo.Object_Position(0.7, 0.3, 0.1, 0.1, myLabel_Red_Yellow_start, this.Controls); // 启动
ViewCaoZuo.Object_Position(0.7, 0.4, 0.1, 0.1, myLabel_Red_Yellow_zanting, this.Controls); // 暂停
ViewCaoZuo.Object_Position(0.7, 0.5, 0.1, 0.1, myLabel_Red_Yellow_zhubeng, this.Controls); // 主泵
ViewCaoZuo.Object_Position(0.7, 0.6, 0.1, 0.1, myLabel_Red_Yellow_tingzhi, this.Controls); // 停止
}
private void init_view()
{
// 初始化操作
ViewCaoZuo.Max_Form(this); // 屏幕最大化
// 树形图的大小位置
ViewCaoZuo.Object_Position(0.01, 0.1, 0.1, 0.8, treeView1, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.05, 0.1, 0.05, label_caidanliebiao, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0, 1, 0.05, label_title, this.Controls);
ViewCaoZuo.Object_Position(0.12, 0.06, 0.85, 0.84, panel_bg, this.Controls);
//zongmao_view.Click_Yiliu += new EventHandler(Show_xiangxi_Yiliu);
//zongmao_view.Click_Qiliu += new EventHandler(Show_xiangxi_Qiliu);
//zongmao_view2.Click_Yiliu += new EventHandler(Show_xiangxi_Yiliu);
//zongmao_view2.Click_Qiliu += new EventHandler(Show_xiangxi_Qiliu);
zongmao_view3.Click_Yiliu += new EventHandler(Show_xiangxi_Yiliu);
zongmao_view3.Click_Qiliu += new EventHandler(Show_xiangxi_Qiliu);
xiangxi_view.return_to_zongmao += new EventHandler(Return_To_MainView);
// 初始化总貌
//zongmao_view.Set_Chejian("一车间");
//zongmao_view.ReSet_Device_Info(); // 显示总貌信息
//zongmao_view2.Set_Chejian("二车间");
//zongmao_view2.ReSet_Device_Info();
zongmao_view3.Set_Chejian("三车间");
zongmao_view3.ReSet_Device_Info();
}
public void init_view()
{
ViewCaoZuo.Object_Position(0, 0, 1, 0.2, label1, this.Controls); // 标题
ViewCaoZuo.Object_Position(0.01, 0.25, 0.2, 0.1, label2, this.Controls); //保温温度
ViewCaoZuo.Object_Position(0.24, 0.25, 0.2, 0.1, textBox_baowenwendu, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.4, 0.2, 0.1, label3, this.Controls); // 保温时间
ViewCaoZuo.Object_Position(0.24, 0.4, 0.2, 0.1, textBox_baowenshijian, this.Controls);
ViewCaoZuo.Object_Position(0.5, 0.25, 0.06, 0.1, pictureBox1, this.Controls); // 主泵频率
ViewCaoZuo.Object_Position(0.56, 0.25, 0.2, 0.1, label6, this.Controls);
ViewCaoZuo.Object_Position(0.79, 0.25, 0.2, 0.1, textBox_pinlv, this.Controls);
ViewCaoZuo.Object_Position(0.5, 0.4, 0.06, 0.1, pictureBox2, this.Controls); // 提布频率
ViewCaoZuo.Object_Position(0.56, 0.4, 0.2, 0.1, label7, this.Controls);
ViewCaoZuo.Object_Position(0.79, 0.4, 0.2, 0.1, textBox_tibu, this.Controls);
ViewCaoZuo.Object_Position(0.5, 0.55, 0.06, 0.1, pictureBox3, this.Controls); // 风机频率
ViewCaoZuo.Object_Position(0.56, 0.55, 0.2, 0.1, label8, this.Controls);
ViewCaoZuo.Object_Position(0.79, 0.55, 0.2, 0.1, textBox_fengji, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0.89, 0.2, 0.1, button1, this.Controls); // 确认
ViewCaoZuo.Object_Position(0.3, 0.89, 0.2, 0.1, button2, this.Controls); // 上一条
ViewCaoZuo.Object_Position(0.6, 0.89, 0.2, 0.1, button3, this.Controls); // 下一条
}
private void init_view()
{
// 标题
ViewCaoZuo.Object_Position(0.01, 0, 1, 0.05, label_title, this.Controls);
// 工具栏
ViewCaoZuo.Object_Position(0.01, 0.05, 1, 0.05, panel_tool, this.Controls);
ViewCaoZuo.Object_Position(0.01, 0, 1, 1, toolStrip1, panel_tool.Controls);
// 选择树形图
ViewCaoZuo.Object_Position(0.01, 0.1, 0.1, 0.85, treeView1, this.Controls);
// 串口信息
ViewCaoZuo.Object_Position(0.12, 0.1, 0.85, 0.2, panel_com_info, this.Controls);
// 数据设置标题
ViewCaoZuo.Object_Position(0.12, 0.1, 0.85, 0.2, panel_dataset, this.Controls);
// 表格背景
ViewCaoZuo.Object_Position(0.12, 0.35, 0.85, 0.6, panel1, this.Controls);
// 表格
ViewCaoZuo.Object_Position(0.01, 0.01, 0.98, 0.98, myDataGridView1, panel1.Controls);
Create_Device_Database(); // 创建串口通讯表
// 波特率下拉菜单
comboBox_botelv.Items.Clear();
comboBox_botelv.Items.Add("2‘kps");
comboBox_botelv.Items.Add("4800kps");
comboBox_botelv.Items.Add("9600kps");
comboBox_botelv.Items.Add("19200kps");
comboBox_botelv.Items.Add("38400kps");
// 数据位下拉菜单
comboBox_shujuwei.Items.Clear();
comboBox_shujuwei.Items.Add("8bits");
comboBox_shujuwei.Items.Add("7bits");
// 停止位
comboBox_tingzhiwei.Items.Clear();
comboBox_tingzhiwei.Items.Add("1bit");
comboBox_tingzhiwei.Items.Add("2bits");
// 校验位
comboBox_jiaoyanwei.Items.Clear();
comboBox_jiaoyanwei.Items.Add("none");
comboBox_jiaoyanwei.Items.Add("odd");
comboBox_jiaoyanwei.Items.Add("even");
modbus1.com_num = 1;
modbus2.com_num = 2;
modbus3.com_num = 3;
modbus4.com_num = 4;
modbus5.com_num = 5;
modbus6.com_num = 6;
Read_All_Com();
}
private void init_view()
{
ViewCaoZuo.Object_Position(0.01, 0.01, 0.1, 0.03, label_machine_num, this.Controls);
}
private void init_view()
{
ViewCaoZuo.Object_Position(0, 0, 1, 0.05, label_title, this.Controls);
}