static bool FindNewSpawnPoint(Heightmap.Biome requestedBiome, Heightmap.BiomeArea requestedBiomeArea, float minXDistance, float maxXDistance, float minZDistance, float maxZDistance, bool ignoreWaterDepthCheck, bool IgnoreWorldGeneratorConstraints, int MaxSpawnPointChecks, out Vector3 point)
{
Vector3 tempNewSpawnPosition = Vector3.zero;
bool found = false;
int x = 0;
float y = 0;
int z = 0;
Vector3 tempLocation = new Vector3(x, y, z);
// for maxDistance to the worldSize value...
float maxDistance = WorldGenerator.worldSize;
float minDistance = 0;
// if not ignoring WorldGenerator constraints on biomes, then enforce them
if (IgnoreWorldGeneratorConstraints)
{
Plugin.Log("Ignoring WorldGenerator Min/Max Constraints");
}
else
{
switch (requestedBiome)
{
case Heightmap.Biome.AshLands:
minDistance = WorldGenerator.ashlandsMinDistance;
break;
case Heightmap.Biome.BlackForest:
maxDistance = WorldGenerator.maxDeepForestDistance;
minDistance = WorldGenerator.minDeepForestDistance;
break;
case Heightmap.Biome.DeepNorth:
minDistance = WorldGenerator.deepNorthMinDistance;
break;
case Heightmap.Biome.Meadows:
maxDistance = WorldGenerator.meadowsMaxDistance;
break;
case Heightmap.Biome.Mountain:
minDistance = WorldGenerator.m_instance.m_minMountainDistance;
break;
case Heightmap.Biome.Swamp:
maxDistance = WorldGenerator.maxMarshDistance;
minDistance = WorldGenerator.minMarshDistance;
break;
}
}
// make sure max is less than max distance and more than minX
float maxX = UtilityClass.Clamp(maxXDistance, minXDistance, maxDistance);
float maxZ = UtilityClass.Clamp(maxZDistance, minZDistance, maxDistance);
// make sure Min#Distance > 0
float minX = (minXDistance > 0) ? minXDistance : 0;
float minZ = (minZDistance > 0) ? minZDistance : 0;
// clamp minDinstance between actual minDistance for biome and maxdistance
minX = UtilityClass.Clamp(minX, minDistance, maxDistance);
minZ = UtilityClass.Clamp(minZ, minDistance, maxDistance);
if (maxXDistance != maxX)
{
Plugin.LogVerbose($"Modified MaxXDistance from {maxXDistance} to {maxX}");
}
if (maxZDistance != maxZ)
{
Plugin.LogVerbose($"Modified MaxZDistance from {maxZDistance} to {maxZ}");
}
if (minXDistance != minX)
{
Plugin.LogVerbose($"Modified MinXDistance from {minXDistance} to {minX}");
}
if (minZDistance != minZ)
{
Plugin.LogVerbose($"Modified MinZDistance from {minZDistance} to {minZ}");
}
Plugin.Log($"Looking for Biome: {requestedBiome} - Type {requestedBiomeArea}");
Plugin.Log($"Looking minX Distance: {minX}, maxX Distance:{maxX}");
Plugin.Log($"Looking minZ Distance: {minZ}, maxZ Distance:{maxZ}");
int spawnPointCheckCount = 0;
while (tempNewSpawnPosition == Vector3.zero && spawnPointCheckCount <= MaxSpawnPointChecks)
{
spawnPointCheckCount++;
// set this as our bounds
x = UnityEngine.Random.Range((int)Math.Round(minX), (int)Math.Round(maxX));
z = UnityEngine.Random.Range((int)Math.Round(minZ), (int)Math.Round(maxZ));
// using the range above, now randomly decide to to switch one to negative or leave positive. This provides a potential range of distance in the spawn away from 0,0
// Int based Random.Range the max is exclusive (unlike float)
if (UnityEngine.Random.Range(1, 3) == 1)
{
x = -x;
}
if (UnityEngine.Random.Range(1, 3) == 1)
{
z = -z;
}
Plugin.LogVerbose($"SpawnCheckCount: {spawnPointCheckCount}, X:{x} , z:{z}");
// note: In Vector3 X is LEFT to RIGHT on map? Y is HEIGHT and Z is TOP/BOTTOM???
tempLocation.x = x;
tempLocation.z = z;
Heightmap.Biome foundBiome = Heightmap.Biome.None;
Heightmap.BiomeArea foundBiomeArea = Heightmap.BiomeArea.Everything;
//try to find a valid height line...
float height = WorldGenerator.instance.GetHeight(tempLocation.x, tempLocation.z);
Plugin.LogVerbose($"Initial coords: {tempLocation}");
// only search here if the height is heigher than the water level as it still has a tendency to pull other biomes
if (height > ZoneSystem.instance.m_waterLevel || ignoreWaterDepthCheck) // && height < WorldGenerator.mountainBaseHeightMin * 85)
{
tempLocation.y = height;
//This is less churn
foundBiome = WorldGenerator.instance.GetBiome(tempLocation);
foundBiomeArea = WorldGenerator.instance.GetBiomeArea(tempLocation);
Plugin.Log($"found {foundBiome}, {foundBiomeArea} @ {tempLocation}");
// match on the returned biome type unless the player didn't care and chose Everything
// match on biome and biometype but don't match on actual biome of None....
// Settings.Biome.Value.None will match on anything, Settings.biome.BiomesMax will match on anything
if (foundBiome != Heightmap.Biome.None && (foundBiome == requestedBiome || Settings.Biome.Value == Heightmap.Biome.None || Settings.Biome.Value == Heightmap.Biome.BiomesMax) && (foundBiomeArea == requestedBiomeArea || Settings.BiomeAreaType.Value == Heightmap.BiomeArea.Everything))
{
Plugin.Log($"found new spawnpoint {foundBiome} @ {tempLocation}");
tempNewSpawnPosition = tempLocation;
found = true;
}
}
}
point = tempNewSpawnPosition;
return(found);
}
static bool Prefix(out Vector3 point, out bool usedLogoutPoint, float dt, Game __instance, ref bool __result)
{
Plugin.Log("FindSpawnPoint_Patch");
point = Vector3.zero;
usedLogoutPoint = false;
try
{
UnityEngine.Random.InitState(DateTime.Now.Year + DateTime.Now.Day + DateTime.Now.Month + DateTime.Now.Millisecond);
// let the original code run
if (!Settings.MMRandomStartPositionEnabled.Value)
{
return(true);
}
Plugin.LogVerbose("Does Player HaveLogoutPoint?");
if (__instance.m_playerProfile.HaveLogoutPoint())
{
return(true);
}
Plugin.LogVerbose("Does Player HaveCustomSpawnPoint?");
if (__instance.m_playerProfile.HaveCustomSpawnPoint() && !Settings.RandomSpawnOnDeath.Value)
{
return(true);
}
// get the HomePoint for the player. It's Vector3.Zero by default
Plugin.LogVerbose("Does Player GetHomePoint?");
if (!Settings.RandomSpawnOnDeath.Value)
{
spawnPoint = __instance.m_playerProfile.GetHomePoint();
}
Plugin.LogVerbose($"HomePoint is {spawnPoint}");
// if we've executed on this more than MaxSpawnPointChecks times, just return true
if (SpawnCheckCount > Settings.MaxSpawnPointChecks.Value)
{
Plugin.Log($"Breaking out, SpawnCheckCount is {SpawnCheckCount}");
return(true);
}
if (spawnPoint == Vector3.zero)
{
int x = 0;
float y = 0;
int z = 0;
Vector3 tempLocation = new Vector3(x, y, z);
// meadows won't spawn out farther than this distance from the middle of the map so no point supporting a number higher than this
float maxDistance = WorldGenerator.worldSize;
float minDistance = 0;
// if not ignoring WorldGenerator constraints on biomes, then enforce them
if (Settings.IgnoreWorldGeneratorConstraints.Value)
{
Plugin.Log("Ignoring WorldGenerator Min/Max Constraints");
}
else
{
switch (Settings.Biome.Value)
{
case Heightmap.Biome.AshLands:
minDistance = WorldGenerator.ashlandsMinDistance;
break;
case Heightmap.Biome.BlackForest:
maxDistance = WorldGenerator.maxDeepForestDistance;
minDistance = WorldGenerator.minDeepForestDistance;
break;
case Heightmap.Biome.DeepNorth:
minDistance = WorldGenerator.deepNorthMinDistance;
break;
case Heightmap.Biome.Meadows:
maxDistance = WorldGenerator.meadowsMaxDistance;
break;
case Heightmap.Biome.Mountain:
minDistance = WorldGenerator.m_instance.m_minMountainDistance;
break;
case Heightmap.Biome.Swamp:
maxDistance = WorldGenerator.maxMarshDistance;
minDistance = WorldGenerator.minMarshDistance;
break;
}
}
// make sure max is less than max distance and more than minX
float maxX = UtilityClass.Clamp(Settings.MaxXDistance.Value, Settings.MinXDistance.Value, maxDistance);
float maxZ = UtilityClass.Clamp(Settings.MaxZDistance.Value, Settings.MinZDistance.Value, maxDistance);
// make sure Min#Distance > 0
float minX = (Settings.MinXDistance.Value > 0) ? Settings.MinXDistance.Value : 0;
float minZ = (Settings.MinZDistance.Value > 0) ? Settings.MinZDistance.Value : 0;
// clamp minDinstance between actual minDistance for biome and maxdistance
minX = UtilityClass.Clamp(minX, minDistance, maxDistance);
minZ = UtilityClass.Clamp(minZ, minDistance, maxDistance);
if (Settings.MaxXDistance.Value != maxX)
{
Plugin.LogVerbose($"Modified MaxXDistance from {Settings.MaxXDistance.Value} to {maxX}");
}
if (Settings.MaxZDistance.Value != maxZ)
{
Plugin.LogVerbose($"Modified MaxZDistance from {Settings.MaxZDistance.Value} to {maxZ}");
}
if (Settings.MinXDistance.Value != minX)
{
Plugin.LogVerbose($"Modified MinXDistance from {Settings.MinXDistance.Value} to {minX}");
}
if (Settings.MinZDistance.Value != minZ)
{
Plugin.LogVerbose($"Modified MinZDistance from {Settings.MinZDistance.Value} to {minZ}");
}
Plugin.Log($"Looking for Biome: {Settings.Biome.Value} - Type {Settings.BiomeAreaType.Value}");
Plugin.Log($"Looking minX Distance: {minX}, maxX Distance:{maxX}");
Plugin.Log($"Looking minZ Distance: {minZ}, maxZ Distance:{maxZ}");
while (spawnPoint == Vector3.zero)
{
if (SpawnCheckCount > Settings.MaxSpawnPointChecks.Value)
{
Plugin.Log($"Breaking out SpawnCheck is {SpawnCheckCount}");
return(true);
}
SpawnCheckCount++;
// set this as our bounds
x = UnityEngine.Random.Range((int)Math.Round(minX), (int)Math.Round(maxX));
z = UnityEngine.Random.Range((int)Math.Round(minZ), (int)Math.Round(maxZ));
// using the range above, now randomly decide to to switch one to negative or leave positive. This provides a potential range of distance in the spawn away from 0,0
// Int based Random.Range the max is exclusive (unlike float)
if (UnityEngine.Random.Range(1, 3) == 1)
{
x = -x;
}
if (UnityEngine.Random.Range(1, 3) == 1)
{
z = -z;
}
Plugin.LogVerbose($"SpawnCheckCount: {SpawnCheckCount}, X:{x} , z:{z}");
// note: In Vector3 X is LEFT to RIGHT on map? Y is HEIGHT and Z is TOP/BOTTOM???
tempLocation.x = x;
tempLocation.z = z;
Heightmap.Biome biome = Heightmap.Biome.None;
Heightmap.BiomeArea biomeArea = Heightmap.BiomeArea.Everything;
//try to find a valid height line...
float height = WorldGenerator.instance.GetHeight(tempLocation.x, tempLocation.z);
Plugin.LogVerbose($"Initial coords: {tempLocation}");
// only search here if the height is heigher than the water level as it still has a tendency to pull other biomes
if (height > ZoneSystem.instance.m_waterLevel || Settings.IgnoreWaterDepthCheck.Value) // && height < WorldGenerator.mountainBaseHeightMin * 85)
{
tempLocation.y = height;
//This is less churn
biome = WorldGenerator.instance.GetBiome(tempLocation);
biomeArea = WorldGenerator.instance.GetBiomeArea(tempLocation);
Plugin.Log($"found {biome}, {biomeArea} @ {tempLocation}");
// match on the returned biome type unless the player didn't care and chose Everything
// match on biome and biometype but don't match on actual biome of None....
// Settings.Biome.Value.None will match on anything, Settings.biome.BiomesMax will match on anything
if (biome != Heightmap.Biome.None && (biome == Settings.Biome.Value || Settings.Biome.Value == Heightmap.Biome.None || Settings.Biome.Value == Heightmap.Biome.BiomesMax) && (biomeArea == Settings.BiomeAreaType.Value || Settings.BiomeAreaType.Value == Heightmap.BiomeArea.Everything))
{
Plugin.Log($"found new spawnpoint {biome} @ {tempLocation}");
spawnPoint = tempLocation;
__instance.m_playerProfile.SetHomePoint(spawnPoint + Vector3.up * 2f);
// register a starter location nearby
// just a method to dump these starter locations out when verbose is enabled and only then
if (Settings.PluginLoggingLevel.Value == Plugin.LoggingLevel.Verbose)
{
Plugin.LogVerbose("Dumping Zones Coordinates");
foreach (var zone in ZoneSystem.instance.m_generatedZones)
{
Plugin.LogVerbose($"Zone Vector2i: {zone}");
Plugin.LogVerbose($" Zone Position: {ZoneSystem.instance.GetZonePos(zone)}");
}
Plugin.LogVerbose("Dumping ZoneLocation Names");
foreach (ZoneSystem.ZoneLocation item in ZoneSystem.instance.m_locations)
{
Plugin.LogVerbose($"ZoneLocation Name: {item.m_prefabName}");
//if (item.m_prefabName == "StartTemple")
if (item.m_prefabName == "Eikthyrnir" || item.m_prefabName == "StartTemple")
{
//Remove previous locations of this?
//ZoneSystem.instance.RemoveUnplacedLocations(item);
//item.m_unique = false;
//ZoneSystem.instance.RegisterLocation(item, spawnPoint, true);
}
}
}
}
}
}
}
point = spawnPoint + Vector3.up * 2f;
ZNet.instance.SetReferencePosition(point);
__result = ZNetScene.instance.IsAreaReady(point);
Plugin.Log($"Waiting for area to be ready. Spawnpoint {point}");
return(false);
}
catch (Exception ex)
{
// do nothing, just swallow it up
Plugin.LogError(ex.ToString());
}
return(true);
}