/// <summary>
/// 判断是否是一个孔
/// </summary>
/// <param name="other"></param>
/// <returns></returns>
public bool IsTheSameHole(AbstractCircleFace other)
{
double angle = UMathUtils.Angle(this.Data.Dir, other.Data.Dir);
if (UMathUtils.IsEqual(angle, 0) == false && UMathUtils.IsEqual(angle, Math.PI) == false)
{
return(false);
}
Vector3d vec1 = new Vector3d();
Vector3d vec2 = new Vector3d();
if (UMathUtils.IsEqual(this.CenterPt, other.CenterPt))
{
vec1 = this.Data.Dir;
vec2 = new Vector3d(-vec1.X, -vec1.Y, -vec1.Z);
}
else
{
vec1 = UMathUtils.GetVector(this.CenterPt, other.CenterPt);
vec2 = UMathUtils.GetVector(other.CenterPt, this.CenterPt);
}
angle = UMathUtils.Angle(this.Data.Dir, vec1);
if (UMathUtils.IsEqual(angle, 0) == false && UMathUtils.IsEqual(angle, Math.PI) == false)
{
return(false);
}
if (TraceARay.AskTraceARay(this.Data.Face.GetBody(), this.CenterPt, vec1) > 1 && TraceARay.AskTraceARay(other.Data.Face.GetBody(), other.CenterPt, vec2) > 1)
{
return(false);
}
return(true);
}
public override List <StandardPartsName> GetGuidePillar()
{
List <MoldBaseModel> dowFace = this.FaceEiectorPlates.FindAll(a => a.CenterPt.Z < 0);
List <MoldBaseModel> dow = this.DowEiectorPlates.FindAll(a => a.CenterPt.Z < 0);
List <AbstractCylinderBody> pillars = new List <AbstractCylinderBody>();
List <AbstractCylinderBody> pillar = this.cylinderBody.FindAll(a => a.Radius >= 7 && a.IsGuidePillar());
foreach (AbstractCylinderBody ab in pin)
{
AbstractCylinderBody pi = pillar.Find(a => UMathUtils.IsEqual(a.StratPt.X, ab.StratPt.X) && UMathUtils.IsEqual(a.StratPt.Y, ab.StratPt.Y));
//if (!pillars.Exists(a => a.Equals(pi)))
//{
// pillars.Add(pi);
//}
if (pi != null)
{
pi.Name = "导柱";
pillars.Add(pi);
pillar.Remove(pi);
}
}
if (this.SupportPlate != null && dowFace.Count != 0 && dow.Count != 0)
{
foreach (AbstractCylinderBody ab in pillar)
{
Point3d start = ab.StratPt;
Point3d end = ab.EndPt;
this.analysis.Matr.ApplyPos(ref start);
this.analysis.Matr.ApplyPos(ref end);
Vector3d vec = UMathUtils.GetVector(this.DowEiectorPlates[0].CenterPt, this.SupportPlate.CenterPt);
if (UMathUtils.IsEqual(UMathUtils.Angle(vec, ab.Direction), 0) &&
UMathUtils.IsEqual(start.Z, dow[0].CenterPt.Z + dow[0].DisPt.Z) &&
end.Z > this.SupportPlate.CenterPt.Z - this.SupportPlate.DisPt.Z)
{
ab.Name = "回针";
pillars.Add(ab);
}
}
}
else if (this.SupportPlate == null && dowFace.Count != 0 && dow.Count != 0)
{
foreach (AbstractCylinderBody ab in pillar)
{
Point3d start = ab.StratPt;
Point3d end = ab.EndPt;
this.analysis.Matr.ApplyPos(ref start);
this.analysis.Matr.ApplyPos(ref end);
Vector3d vec = UMathUtils.GetVector(this.DowEiectorPlates[0].CenterPt, this.BMoldBase.CenterPt);
if (UMathUtils.IsEqual(UMathUtils.Angle(vec, ab.Direction), 0) &&
UMathUtils.IsEqual(start.Z, dow[0].CenterPt.Z + dow[0].DisPt.Z) &&
end.Z > this.BMoldBase.CenterPt.Z - this.BMoldBase.DisPt.Z)
{
ab.Name = "回针";
pillars.Add(ab);
}
}
}
return(GetCyliderName(pillars));
}
protected override void GetDirection()
{
Point3d pt1 = this.Builder.CylFeater[0].Cylinder.CenterPt;
Point3d pt2 = this.Builder.CylFeater[1].Cylinder.CenterPt;
Vector3d vec = UMathUtils.GetVector(pt1, pt2);
this.Direction = vec;
this.Builder.SetDirection(vec);
}
/// <summary>
/// 圆形凸台
/// </summary>
/// <param name="other"></param>
/// <returns></returns>
public bool IsCircleStep(AbstractCircleFace other)
{
double angle = UMathUtils.Angle(this.Data.Dir, other.Data.Dir);
if (UMathUtils.IsEqual(angle, 0) == false && UMathUtils.IsEqual(angle, Math.PI) == false)
{
return(false);
}
Vector3d vec1 = UMathUtils.GetVector(this.CenterPt, other.CenterPt);
angle = UMathUtils.Angle(this.Data.Dir, vec1);
if (UMathUtils.IsEqual(angle, 0) == false && UMathUtils.IsEqual(angle, Math.PI) == false)
{
return(false);
}
return(true);
}
/// <summary>
/// 根据AB板得到矩阵
/// </summary>
/// <returns></returns>
private Matrix4 GetMatr()
{
CoordinateSystem wcs = workPart.WCS.CoordinateSystem;
Matrix4 mat = new Matrix4();
mat.Identity();
mat.TransformToCsys(wcs, ref mat);
Matrix4 inv = mat.GetInversMatrix();
CartesianCoordinateSystem cs = BoundingBoxUtils.CreateCoordinateSystem(mat, inv);
MoldBaseModel aMold = new MoldBaseModel(aBody, mat, cs);
MoldBaseModel bMold = new MoldBaseModel(bBody, mat, cs);
Vector3d vec = UMathUtils.GetVector(bMold.CenterPt, aMold.CenterPt);
Point3d center = UMathUtils.GetMiddle(bMold.CenterPt, aMold.CenterPt);
inv.ApplyPos(ref center);
mat.TransformToZAxis(center, vec);
return(mat);
}
/// <summary>
/// 获取螺栓
/// </summary>
/// <returns></returns>
public List <AbstractCylinderBody> GetBolt(List <AbstractCylinderBody> cylinder, MoldBaseModel other)
{
Vector3d vec = UMathUtils.GetVector(new Point3d(0, 0, this.CenterPt.Z), new Point3d(0, 0, other.CenterPt.Z));
List <AbstractCylinderBody> temp = cylinder.FindAll(a => UMathUtils.IsEqual(UMathUtils.Angle(vec, a.Direction), 0));
List <AbstractCylinderBody> bolt = new List <AbstractCylinderBody>();
foreach (AbstractCylinderBody ab in temp)
{
Point3d start = ab.StratPt;
Point3d end = ab.EndPt;
this.matr.ApplyPos(ref start);
this.matr.ApplyPos(ref end);
if ((start.Z > this.CenterPt.Z - this.DisPt.Z && start.Z < this.CenterPt.Z + this.DisPt.Z) &&
(end.Z > other.CenterPt.Z - other.DisPt.Z && end.Z <= other.CenterPt.Z + other.DisPt.Z))
{
// ab.Name = "M" + Math.Ceiling(ab.Radius * 2).ToString();
ab.Name = "螺丝";
bolt.Add(ab);
continue;
}
}
return(bolt);
}
protected override void GetDirection()
{
this.Direction = UMathUtils.GetVector(this.Builder.CylFeater[0].Cylinder.CenterPt, this.Builder.CylFeater[1].Cylinder.CenterPt);
this.Builder.SetDirection(this.Direction);
}
