/// <summary>
/// 文件传输
/// </summary>
/// <param name="fis">文件读取流</param>
/// <param name="outStream">网络传输流</param>
/// <param name="size">文件大小</param>
/// <param name="flush">是否及时刷新</param>
public static void CopyFileSender(FileStream fis, UDTOutputStream outStream, long size, bool flush)
{
byte[] buf = new byte[8 * 65536];
int c;
long read = 0;
while (true)
{
c = fis.Read(buf, 0, buf.Length);
if (c < 0)
{
break;
}
read += c;
Console.WriteLine("writing <" + c + "> bytes");
outStream.Write(buf, 0, c);
if (flush)
{
outStream.Flush();
}
if (read >= size && size > -1)
{
break;
}
}
if (!flush)
{
outStream.Flush();
}
}
private static void copyFile(FileStream file, UDTOutputStream os)
{
try
{
byte[] filebuf = new byte[file.Length];
file.Read(filebuf, 0, (int)file.Length);
//可以读取的长度
int numBytesToRead = (int)file.Length;
//已经读取的长度
int numBytesRead = 0;
while (true)
{
int len = 0;
len = Math.Min(1024 * 1024, numBytesToRead);
byte[] buf = new byte[len];
Array.Copy(filebuf, numBytesRead, buf, 0, len);
os.Write(buf, 0, len);
numBytesRead += len;
numBytesToRead -= len;
if (numBytesToRead == 0)
{
break;
}
}
os.Flush();
file.Close();
}
catch (Exception exc)
{
Log.Write("[SendFile] File err", exc);
}
}
public void Run()
{
try
{
//create an UDTServerSocket on a free port
UDTServerSocket server = new UDTServerSocket(0);
// do hole punching to allow the client to connect
IPAddress clientAddress = IPAddress.Parse(clientIP);
IPEndPoint point = new IPEndPoint(clientAddress, clientPort);
//发送一字节确认端口
Util.DoHolePunch(server.getEndpoint(), point);
int localPort = server.getEndpoint().LocalPort; //获取真实端口
//output client port
writeToOut("OUT: " + localPort);
//now start the send...
UDTSocket socket = server.Accept();
UDTOutputStream outStream = socket.GetOutputStream();
FileInfo file = new FileInfo(localFilename);
if (!file.Exists)
{
Console.WriteLine("没有文件：" + localFilename);
socket.Close();
server.ShutDown();
return;
}
FileStream fis = new FileStream(localFilename, FileMode.Open);
try
{
//send file size info
long size = fis.Length;
PacketUtil.Encode(size);
outStream.Write(PacketUtil.Encode(size));
long start = DateTime.Now.Ticks;
//and send the file
Util.CopyFileSender(fis, outStream, size, false);
long end = DateTime.Now.Ticks;
Console.WriteLine(socket.GetSession().Statistics);
float mbRate = 1000 * size / 1024 / 1024 / (end - start);
float mbitRate = 8 * mbRate;
Console.WriteLine("Rate: " + (int)mbRate + " MBytes/sec. " + mbitRate + " mbit/sec.");
}
finally
{
fis.Close();
socket.Close();
}
}
catch (Exception ex)
{
}
}
/// <summary>
/// copy input data from the source stream to the target stream
/// 用在发送文件
/// </summary>
/// <param name="source">文件流</param>
/// <param name="target">output stream to write to</param>
/// <param name="size">要接收的总长度</param>
/// <param name="flush">每次写入后是否清除此流的缓冲区</param>
public static void copySend(FileStream source, UDTOutputStream target, long size, bool flush)
{
try
{
byte[] filebuf = new byte[source.Length];
source.Read(filebuf, 0, (int)source.Length);
//可以读取的长度
int numBytesToRead = (int)source.Length;
//已经读取的长度
int numBytesRead = 0;
target.Write(filebuf, 0, filebuf.Length);
//while (true)
//{
// int len = 0;
// len = Math.Min(512 * 1024, numBytesToRead);
// if (len == 0)
// break;
// byte[] buf = new byte[len];
// Array.Copy(filebuf, numBytesRead, buf, 0, len);
// //Log.Write("writing <"+len+"> bytes");
// target.Write(buf, 0, len);
// numBytesRead += len;
// numBytesToRead -= len;
// if (flush)
// target.Flush();
// Thread.Sleep(200);
//}
//if (!flush)
//{
// target.Flush();
//}
source.Close();
}
catch (Exception exc)
{
source.Close();
Log.Write("copySend-SendFile", exc);
}
}
public void run(object stateInfo)
{
TaskInfo ti = (TaskInfo)stateInfo;
bool memMapped = false;
try
{
Log.Write("Handling request from " + ti.socket.getSession().getDestination());
UDTInputStream inputStream = ti.socket.getInputStream();
UDTOutputStream outputStream = ti.socket.getOutputStream();
byte[] readBuf = new byte[32768];
//read file name info
while (inputStream.Read(readBuf, 0, readBuf.Length) == 0)
{
Thread.Sleep(100);
}
ByteBuffer bb = new ByteBuffer(readBuf);
//how many bytes to read for the file name
//byte[] len = new byte[4];
byte[] len = bb.PopByteArray(4);
if (ti.verbose)
{
StringBuilder sb = new StringBuilder();
for (int i = 0; i < len.Length; i++)
{
sb.Append(len[i].ToString());
sb.Append(" ");
}
Log.Write("[SendFile] name length data: " + sb.ToString());
}
long length = Util.decode(len, 0);
if (verbose)
{
Log.Write("[SendFile] name length : " + length);
}
//byte[] fileName = new byte[(int)length];
byte[] fileName = bb.PopByteArray((int)length);
string sfileName = Encoding.Default.GetString(fileName);
if (!File.Exists(sfileName))
{
Log.Write("[SendFile] Send the file does not exist : " + sfileName);
return;
}
FileStream fis = new FileStream(sfileName, FileMode.Open, FileAccess.Read);
Log.Write("[SendFile] File requested: " + sfileName);
try
{
long size = fis.Length;
Log.Write("[SendFile] File size: " + size);
//send size info
outputStream.Write(Util.encode64(size), 0, 8);
outputStream.Flush();
//( System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks)/10000;
//如果要得到Java中 System.currentTimeMillis() 一样的结果，就可以写成 上面那样，也可以这样写：
// TimeSpan ts=new TimeSpan( System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
//(long)ts.TotalMilliseconds;
TimeSpan ts_start = new TimeSpan(System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
long start = (long)ts_start.TotalMilliseconds;
//and send the file
if (memMapped)
{
copyFile(fis, outputStream);
}
else
{
Util.copySend(fis, outputStream, size, false);
}
while (true)
{
//UDTSender _udtsender = ti.socket.getSender();
//if (_udtsender.GetsendQueueCount() == 0)
UDTSession _udtsession = ti.socket.getSession();
if (_udtsession.getState() == 4)
{
break;
}
else
{
Thread.Sleep(2000);
}
}
Log.Write("[SendFile] Finished sending data.");
TimeSpan ts_end = new TimeSpan(System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
long end = (long)ts_end.TotalMilliseconds;
Log.Write(ti.socket.getSession().getStatistics().toString());
double rate = 1000.0 * size / 1024 / 1024 / (end - start);
Log.Write("[SendFile] Rate: " + Math.Round(rate, 3) + " MBytes/sec. " + Math.Round(8 * rate, 3) + " MBit/sec.");
}
finally
{
ti.socket.getSender().stop();
ti.socket.close();
if (fis != null)
{
fis.Close();
}
}
Log.Write("Finished request from " + ti.socket.getSession().getDestination());
}
catch (Exception ex)
{
Log.Write("[SendFile] File err", ex);
}
}
public void RunReceive()
{
verbose = true;
try
{
UDTReceiver.connectionExpiryDisabled = true;
//IPAddress myHost = null;
//if (localIP != "")
//{
// myHost = IPAddress.Parse(localIP);
//}
//else
//{
// string hostname = Dns.GetHostName();
// IPHostEntry hostip = Dns.GetHostEntry(hostname);
// foreach (IPAddress ipaddress in hostip.AddressList)
// {
// if (ipaddress.ToString().IndexOf(':') < 0)//存在IPV6的地址，所以要判断
// {
// myHost = ipaddress;
// break;
// }
// }
//}
UDTClient client = new UDTClient(localPort);
client.connect(serverHost, serverPort);
UDTInputStream inputStream = client.getInputStream();//报错未将对象引用设置到对象的实例。
UDTOutputStream outputStream = client.getOutputStream();
Log.Write(this.ToString(), "[ReceiveFile] Requesting file " + remoteFile);
byte[] fName = Encoding.Default.GetBytes(remoteFile);
//send file name info
byte[] nameinfo = new byte[fName.Length + 4];
System.Array.Copy(Util.encode(fName.Length), 0, nameinfo, 0, 4);
System.Array.Copy(fName, 0, nameinfo, 4, fName.Length);
outputStream.Write(nameinfo, 0, nameinfo.Length);
outputStream.Flush();
//pause the sender to save some CPU time
outputStream.pauseOutput();
//存放文件长度信息
byte[] sizeInfo = new byte[8];
int total = 0;
while (total < sizeInfo.Length)
{
int r = inputStream.Read(sizeInfo, 0, sizeInfo.Length);
if (r < 0)
{
break;
}
total += r;
Thread.Sleep(50);
}
long size = Util.decode(sizeInfo, 0);
if (File.Exists(localFile))
{
File.Delete(localFile);
}
Log.Write(this.ToString(), "[ReceiveFile] Write to local file <" + localFile + ">");
FileStream os = new FileStream(localFile, FileMode.Create, FileAccess.Write);
try
{
Log.Write(this.ToString(), "[ReceiveFile] Reading <" + size + "> bytes.");
//( System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks)/10000;
//如果要得到Java中 System.currentTimeMillis() 一样的结果，就可以写成 上面那样，也可以这样写：
// TimeSpan ts=new TimeSpan( System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
//(long)ts.TotalMilliseconds;
TimeSpan ts_start = new TimeSpan(System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
long start = (long)ts_start.TotalMilliseconds;
//接收文件数据
Util.copy(inputStream, os, size, false);
client.shutdown();
TimeSpan ts_end = new TimeSpan(System.DateTime.UtcNow.Ticks - new DateTime(1970, 1, 1, 0, 0, 0).Ticks);
long end = (long)ts_end.TotalMilliseconds;
double rate = 1000.0 * size / 1024 / 1024 / (end - start); //接收所用时间
Log.Write(this.ToString(), "[ReceiveFile] Rate: " + Math.Round(rate, 3) + " MBytes/sec. " + Math.Round(8 * rate, 3) + " MBit/sec.");
if (verbose)
{
Log.Write(this.ToString(), client.getStatistics().toString());
}
}
finally
{
os.Close();
}
}
catch (Exception ex)
{
Log.Write(this.ToString(), "RunReceive", ex);
}
}
public void Run()
{
try
{
FlashLogger.Info("Handling request from " + socket.GetSession().Destination);
UDTInputStream intStream = socket.GetInputStream();
UDTOutputStream outStream = socket.GetOutputStream();
byte[] readBuf = new byte[32768];
//read file name info
while (intStream.Read(readBuf) == 0)
{
Thread.Sleep(100);
}
//how many bytes to read for the file name
byte[] len = new byte[4];
//bb.get(len);
Array.Copy(readBuf, 0, len, 0, 4);//文件名称长度
if (verbose)
{
StringBuilder sb = new StringBuilder();
for (int i = 0; i < len.Length; i++)
{
sb.Append((len[i]).ToString());
sb.Append(" ");
}
Console.WriteLine("[SendFile] name length data: " + sb.ToString());
}
long length = Decode(len, 0);
if (verbose)
{
Console.WriteLine("[SendFile] name length : " + length);
}
byte[] fileName = new byte[(int)length];
//读取文件名称
Array.Copy(readBuf, 4, fileName, 0, fileName.Length);
FileInfo file = new FileInfo(Encoding.UTF8.GetString(fileName));//兼容java
Console.WriteLine("[SendFile] File requested: '" + file.FullName + "'");
FileStream fis = null;
try
{
long size = file.Length;
Console.WriteLine("[SendFile] File size: " + size);
//send size info
outStream.Write(Encode64(size)); //先写入大小
outStream.Flush(); //传输完成
long start = DateTime.Now.Ticks;
fis = new FileStream(file.FullName, FileMode.Open);
CopyFile(fis, outStream, size, false);
Console.WriteLine("[SendFile] Finished sending data.");
long end = DateTime.Now.Ticks;
Console.WriteLine(socket.GetSession().Statistics.toString());
double rate = 1000.0 * size / 1024 / 1024 / (end - start);
Console.WriteLine("[SendFile] Rate: " + rate.ToString(format) + " MBytes/sec. " + (8 * rate).ToString(format) + " MBit/sec.");
}
finally
{
socket.GetSender().Stop();
if (fis != null)
{
fis.Close();
}
}
FlashLogger.Info("Finished request from " + socket.GetSession().Destination);
}
catch (Exception ex)
{
FlashLogger.Error(ex.Message);
}
}
public void Run()
{
Configure();
verbose = true;
try{
UDTReceiver.connectionExpiryDisabled = true;
UDTClient client = new UDTClient(localPort, localIP);
client.Connect(this.serverHost, this.serverPort);
UDTInputStream inStream = client.GetInputStream();
UDTOutputStream outStream = client.GetOutputStream();
Console.WriteLine("[ReceiveFile] Requesting file " + remoteFile);
byte[] fName = Encoding.UTF8.GetBytes(remoteFile);//兼容java
//send file name info
byte[] nameinfo = new byte[fName.Length + 4];
Array.Copy(Encode(fName.Length), 0, nameinfo, 0, 4);
Array.Copy(fName, 0, nameinfo, 4, fName.Length);
outStream.Write(nameinfo);
outStream.Flush();
//pause the sender to save some CPU time
outStream.PauseOutput();
//read size info (an 64 bit number)
byte[] sizeInfo = new byte[8];
int total = 0;
while (total < sizeInfo.Length)
{
int r = inStream.Read(sizeInfo);
if (r < 0)
{
break;
}
total += r;
}
//读取文件长度
long size = Decode(sizeInfo, 0);
FileInfo file = new FileInfo(localFile);
Console.WriteLine("[ReceiveFile] Write to local file <" + file.FullName + ">");
FileStream fos = new FileStream(file.FullName, FileMode.Append); //准备写入文件
try{
Console.WriteLine("[ReceiveFile] Reading <" + size + "> bytes.");
long start = DateTime.Now.Ticks;
//and read the file data
//Util.copy(in, os, size, false);
CopyFile(fos, inStream, size, false);
long end = DateTime.Now.Ticks;
double rate = 1000.0 * size / 1024 / 1024 / (end - start);
Console.WriteLine("[ReceiveFile] Rate: " + rate.ToString(format) + " MBytes/sec. "
+ (8 * rate).ToString(format) + " MBit/sec.");
client.Shutdown();
if (verbose)
{
Console.WriteLine(client.GetStatistics());
}
}finally{
fos.Close();
}
}catch (Exception ex) {
//throw new RuntimeException(ex);
}
}