/// <summary>
/// This method compares two pipelines to make sure they are identical. The first pipeline is passed
/// as a <see cref="RoleMappedData"/>, and the second as a double byte array and a string array. The double
/// byte array and the string array are obtained by calling <see cref="SerializeRoleMappedData"/> on the
/// second pipeline.
/// The comparison is done by saving <see ref="dataToCompare"/> as an in-memory <see cref="ZipArchive"/>,
/// and for each entry in it, comparing its name, and the byte sequence to the corresponding entries in
/// <see ref="dataZipEntryNames"/> and <see ref="dataSerialized"/>.
/// This method throws if for any of the entries the name/byte sequence are not identical.
/// </summary>
internal static void CheckSamePipeline(IHostEnvironment env, IChannel ch,
RoleMappedData dataToCompare, byte[][] dataSerialized, string[] dataZipEntryNames)
{
Contracts.CheckValue(env, nameof(env));
env.CheckValue(ch, nameof(ch));
ch.CheckValue(dataToCompare, nameof(dataToCompare));
ch.CheckValue(dataSerialized, nameof(dataSerialized));
ch.CheckValue(dataZipEntryNames, nameof(dataZipEntryNames));
if (dataZipEntryNames.Length != dataSerialized.Length)
{
throw ch.ExceptParam(nameof(dataSerialized),
$"The length of {nameof(dataSerialized)} must be equal to the length of {nameof(dataZipEntryNames)}");
}
using (var ms = new MemoryStream())
{
// REVIEW: This can be done more efficiently by adding a custom type of repository that
// doesn't actually save the data, but upon stream closure compares the results to the given repository
// and then discards it. Currently, however, this cannot be done because ModelSaveContext does not use
// an abstract class/interface, but rather the RepositoryWriter class.
TrainUtils.SaveModel(env, ch, ms, null, dataToCompare);
string errorMsg = "Models contain different pipelines, cannot ensemble them.";
var zip = new ZipArchive(ms);
var entries = zip.Entries.OrderBy(e => e.FullName).ToArray();
ch.Check(dataSerialized.Length == Utils.Size(entries));
byte[] buffer = null;
for (int i = 0; i < dataSerialized.Length; i++)
{
ch.Check(dataZipEntryNames[i] == entries[i].FullName, errorMsg);
int len = dataSerialized[i].Length;
if (Utils.Size(buffer) < len)
{
buffer = new byte[len];
}
using (var s = entries[i].Open())
{
int bytesRead = s.Read(buffer, 0, len);
ch.Check(bytesRead == len, errorMsg);
for (int j = 0; j < len; j++)
{
ch.Check(buffer[j] == dataSerialized[i][j], errorMsg);
}
if (s.Read(buffer, 0, 1) > 0)
{
throw env.Except(errorMsg);
}
}
}
}
}
public void TrainSaveModelAndPredict()
{
var dataPath = GetDataPath(SentimentDataPath);
var testDataPath = GetDataPath(SentimentTestPath);
using (var env = new LocalEnvironment(seed: 1, conc: 1))
{
// Pipeline
var loader = TextLoader.ReadFile(env, MakeSentimentTextLoaderArgs(), new MultiFileSource(dataPath));
var trans = TextTransform.Create(env, MakeSentimentTextTransformArgs(), loader);
// Train
var trainer = new LinearClassificationTrainer(env, new LinearClassificationTrainer.Arguments
{
NumThreads = 1
});
var cached = new CacheDataView(env, trans, prefetch: null);
var trainRoles = new RoleMappedData(cached, label: "Label", feature: "Features");
var predictor = trainer.Train(new Runtime.TrainContext(trainRoles));
PredictionEngine <SentimentData, SentimentPrediction> model;
using (var file = env.CreateTempFile())
{
// Save model.
var scoreRoles = new RoleMappedData(trans, label: "Label", feature: "Features");
using (var ch = env.Start("saving"))
TrainUtils.SaveModel(env, ch, file, predictor, scoreRoles);
// Load model.
using (var fs = file.OpenReadStream())
model = env.CreatePredictionEngine <SentimentData, SentimentPrediction>(fs);
}
// Take a couple examples out of the test data and run predictions on top.
var testLoader = TextLoader.ReadFile(env, MakeSentimentTextLoaderArgs(), new MultiFileSource(GetDataPath(SentimentTestPath)));
var testData = testLoader.AsEnumerable <SentimentData>(env, false);
foreach (var input in testData.Take(5))
{
var prediction = model.Predict(input);
// Verify that predictions match and scores are separated from zero.
Assert.Equal(input.Sentiment, prediction.Sentiment);
Assert.True(input.Sentiment && prediction.Score > 1 || !input.Sentiment && prediction.Score < -1);
}
}
}
private IDataScorerTransform GetScorer(IHostEnvironment env, IDataView transforms, IPredictor pred, string testDataPath = null)
{
using (var ch = env.Start("Saving model"))
using (var memoryStream = new MemoryStream())
{
var trainRoles = new RoleMappedData(transforms, label: "Label", feature: "Features");
// Model cannot be saved with CacheDataView
TrainUtils.SaveModel(env, ch, memoryStream, pred, trainRoles);
memoryStream.Position = 0;
using (var rep = RepositoryReader.Open(memoryStream, ch))
{
IDataLoader testPipe = ModelFileUtils.LoadLoader(env, rep, new MultiFileSource(testDataPath), true);
RoleMappedData testRoles = new RoleMappedData(testPipe, label: "Label", feature: "Features");
return(ScoreUtils.GetScorer(pred, testRoles, env, testRoles.Schema));
}
}
}
public void TestGcnNormOldSavingAndLoading()
{
string dataSource = GetDataPath(TestDatasets.generatedRegressionDataset.trainFilename);
var dataView = TextLoader.CreateReader(ML,
c => (label: c.LoadFloat(11), features: c.LoadFloat(0, 10)),
separator: ';', hasHeader: true)
.Read(dataSource).AsDynamic;
var pipe = new GlobalContrastNormalizingEstimator(ML, "features", "whitened");
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(ML, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(ML, dataView, ms);
}
}
internal override void Save(IHostEnvironment env, Stream stream)
{
Contracts.CheckValue(env, nameof(env));
env.CheckValue(stream, nameof(stream));
using (var ch = env.Start("Saving predictor model"))
{
// REVIEW: address the asymmetry in the way we're loading and saving the model.
// Effectively, we have methods to load the transform model from a model.zip, but don't have
// methods to compose the model.zip out of transform model, predictor and role mappings
// (we use the TrainUtils.SaveModel that does all three).
// Create the chain of transforms for saving.
IDataView data = new EmptyDataView(env, TransformModel.InputSchema);
data = TransformModel.Apply(env, data);
var roleMappedData = new RoleMappedData(data, _roleMappings, opt: true);
TrainUtils.SaveModel(env, ch, stream, Predictor, roleMappedData);
}
}
void TestOldSavingAndLoading()
{
var data = new[] { new TestClass() { A = 1, B = 2, C = 3, }, new TestClass() { A = 4, B = 5, C = 6 } };
var dataView = ML.Data.ReadFromEnumerable(data);
var est = new ValueToKeyMappingEstimator(Env, new[]{
new ValueToKeyMappingTransformer.ColumnInfo("A", "TermA"),
new ValueToKeyMappingTransformer.ColumnInfo("B", "TermB"),
new ValueToKeyMappingTransformer.ColumnInfo("C", "TermC")
});
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
ValidateTermTransformer(loadedView);
}
}
public void TestWhiteningOldSavingAndLoading()
{
var env = new ConsoleEnvironment(seed: 0);
string dataSource = GetDataPath("generated_regression_dataset.csv");
var dataView = TextLoader.CreateReader(env,
c => (label: c.LoadFloat(11), features: c.LoadFloat(0, 10)),
separator: ';', hasHeader: true)
.Read(dataSource).AsDynamic;
var pipe = new VectorWhiteningEstimator(env, "features", "whitened");
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
}
Done();
}
/// <summary>
/// This method takes a <see cref="RoleMappedData"/> as input, saves it as an in-memory <see cref="ZipArchive"/>
/// and returns two arrays indexed by the entries in the zip:
/// 1. An array of byte arrays, containing the byte sequences of each entry.
/// 2. An array of strings, containing the name of each entry.
///
/// This method is used for comparing pipelines. Its outputs can be passed to <see cref="CheckSamePipeline"/>
/// to check if this pipeline is identical to another pipeline.
/// </summary>
public static void SerializeRoleMappedData(IHostEnvironment env, IChannel ch, RoleMappedData data,
out byte[][] dataSerialized, out string[] dataZipEntryNames)
{
Contracts.CheckValue(env, nameof(env));
env.CheckValue(ch, nameof(ch));
ch.CheckValue(data, nameof(data));
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(env, ch, ms, null, data);
var zip = new ZipArchive(ms);
var entries = zip.Entries.OrderBy(e => e.FullName).ToArray();
dataSerialized = new byte[Utils.Size(entries)][];
dataZipEntryNames = new string[Utils.Size(entries)];
for (int i = 0; i < Utils.Size(entries); i++)
{
dataZipEntryNames[i] = entries[i].FullName;
dataSerialized[i] = new byte[entries[i].Length];
using (var s = entries[i].Open())
s.Read(dataSerialized[i], 0, (int)entries[i].Length);
}
}
}
public void TestOldSavingAndLoading()
{
var modelFile = "model_matmul/frozen_saved_model.pb";
var dataView = ML.Data.LoadFromEnumerable(
new List <TestData>(new TestData[] {
new TestData()
{
a = new[] { 1.0f, 2.0f, 3.0f, 4.0f },
b = new[] { 1.0f, 2.0f, 3.0f, 4.0f }
},
new TestData()
{
a = new[] { 2.0f, 2.0f, 2.0f, 2.0f },
b = new[] { 3.0f, 3.0f, 3.0f, 3.0f }
},
new TestData()
{
a = new[] { 5.0f, 6.0f, 10.0f, 12.0f },
b = new[] { 10.0f, 8.0f, 6.0f, 6.0f }
}
}));
using var model = ML.Model.LoadTensorFlowModel(modelFile);
var est = model.ScoreTensorFlowModel(new[] { "c" }, new[] { "a", "b" });
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
ValidateTensorFlowTransformer(loadedView);
}
}
/// <summary>
/// Saves the pipeline in a stream.
/// </summary>
/// <param name="fs">opened stream</param>
/// <param name="removeFirstTransform">remove the first transform which is a PassThroughTransform</param>
public void Save(Stream fs, bool removeFirstTransform = false)
{
RoleMappedData roleMap = null;
if (removeFirstTransform)
{
var source = _transforms.First().transform;
if (!(source is PassThroughTransform))
{
throw Contracts.ExceptNotSupp($"The first transform should be of type PassThroughTransform.");
}
var replace = (source as PassThroughTransform).Source;
var last = _transforms.Last().transform;
var newPipe = ApplyTransformUtils.ApplyAllTransformsToData(_env, last, replace, source);
var roles = _predictor.roleMapData.Schema.GetColumnRoleNames().ToArray();
roleMap = new RoleMappedData(newPipe, roles);
}
else
{
roleMap = _predictor.roleMapData;
}
using (var ch = _env.Start("Save Predictor"))
TrainUtils.SaveModel(_env, ch, fs, _predictor.predictor, roleMap);
}
public void TestOldSavingAndLoading()
{
var data = new[] { new TestClass()
{
A = "This is a good sentence.", B = new string[2] {
"Much words", "Wow So Cool"
}
} };
var dataView = ML.Data.ReadFromEnumerable(data);
var pipe = new WordTokenizingEstimator(Env, new[] {
new WordTokenizingEstimator.ColumnInfo("TokenizeA", "A"),
new WordTokenizingEstimator.ColumnInfo("TokenizeB", "B"),
});
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
}
}
public void TestOldSavingAndLoading()
{
var data = new[] {
new TestClass()
{
A = 1, B = new int[2] {
2, 3
}, C = new int[2] {
3, 4
}
},
new TestClass()
{
A = 4, B = new int[2] {
2, 4
}, C = new int[3] {
2, 4, 3
}
}
};
var dataView = ML.Data.LoadFromEnumerable(data);
var pipe = ML.Transforms.Categorical.OneHotEncoding(new[] {
new OneHotEncodingEstimator.ColumnOptions("CatA", "A"),
new OneHotEncodingEstimator.ColumnOptions("CatB", "B"),
new OneHotEncodingEstimator.ColumnOptions("CatC", "C")
});
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
}
}
[ConditionalFact(typeof(Environment), nameof(Environment.Is64BitProcess))] // x86 fails with "An attempt was made to load a program with an incorrect format."
void TestOldSavingAndLoading()
{
if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
{
return;
}
var modelFile = "squeezenet/00000001/model.onnx";
var samplevector = GetSampleArrayData();
var dataView = ComponentCreation.CreateDataView(Env,
new TestData[] {
new TestData()
{
data_0 = samplevector
}
});
var inputNames = new[] { "data_0" };
var outputNames = new[] { "softmaxout_1" };
var est = new OnnxScoringEstimator(Env, modelFile, inputNames, outputNames);
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
loadedView.Schema.TryGetColumnIndex(outputNames[0], out int softMaxOut1);
using (var cursor = loadedView.GetRowCursor(col => col == softMaxOut1))
{
VBuffer <float> softMaxValue = default;
var softMaxGetter = cursor.GetGetter <VBuffer <float> >(softMaxOut1);
float sum = 0f;
int i = 0;
while (cursor.MoveNext())
{
softMaxGetter(ref softMaxValue);
var values = softMaxValue.DenseValues();
foreach (var val in values)
{
sum += val;
if (i == 0)
{
Assert.InRange(val, 0.00004, 0.00005);
}
if (i == 1)
{
Assert.InRange(val, 0.003844, 0.003845);
}
if (i == 999)
{
Assert.InRange(val, 0.0029566, 0.0029567);
}
i++;
}
}
Assert.InRange(sum, 1.0, 1.00001);
}
}
}
public void TestBackAndForthConversionWithoutAlphaNoInterleaveNoOffset()
{
IHostEnvironment env = new MLContext();
const int imageHeight = 100;
const int imageWidth = 130;
var dataFile = GetDataPath("images/images.tsv");
var imageFolder = Path.GetDirectoryName(dataFile);
var data = TextLoader.Create(env, new TextLoader.Arguments()
{
Columns = new[]
{
new TextLoader.Column("ImagePath", DataKind.TX, 0),
new TextLoader.Column("Name", DataKind.TX, 1),
}
}, new MultiFileSource(dataFile));
var images = new ImageLoaderTransformer(env, imageFolder, ("ImageReal", "ImagePath")).Transform(data);
var cropped = new ImageResizerTransformer(env, "ImageCropped", imageWidth, imageHeight, "ImageReal").Transform(images);
var pixels = new ImagePixelExtractorTransformer(env, "ImagePixels", "ImageCropped").Transform(cropped);
IDataView backToBitmaps = new VectorToImageTransform(env, new VectorToImageTransform.Arguments()
{
InterleaveArgb = false,
Columns = new VectorToImageTransform.Column[1] {
new VectorToImageTransform.Column()
{
Name = "ImageRestored", Source = "ImagePixels", ImageHeight = imageHeight, ImageWidth = imageWidth, ContainsAlpha = false
}
}
}, pixels);
var fname = nameof(TestBackAndForthConversionWithoutAlphaNoInterleaveNoOffset) + "_model.zip";
var fh = env.CreateOutputFile(fname);
using (var ch = env.Start("save"))
TrainUtils.SaveModel(env, ch, fh, null, new RoleMappedData(backToBitmaps));
backToBitmaps = ModelFileUtils.LoadPipeline(env, fh.OpenReadStream(), new MultiFileSource(dataFile));
DeleteOutputPath(fname);
backToBitmaps.Schema.TryGetColumnIndex("ImageRestored", out int bitmapColumn);
backToBitmaps.Schema.TryGetColumnIndex("ImageCropped", out int cropBitmapColumn);
using (var cursor = backToBitmaps.GetRowCursorForAllColumns())
{
var bitmapGetter = cursor.GetGetter <Bitmap>(bitmapColumn);
Bitmap restoredBitmap = default;
var bitmapCropGetter = cursor.GetGetter <Bitmap>(cropBitmapColumn);
Bitmap croppedBitmap = default;
while (cursor.MoveNext())
{
bitmapGetter(ref restoredBitmap);
Assert.NotNull(restoredBitmap);
bitmapCropGetter(ref croppedBitmap);
Assert.NotNull(croppedBitmap);
for (int x = 0; x < imageWidth; x++)
{
for (int y = 0; y < imageHeight; y++)
{
var c = croppedBitmap.GetPixel(x, y);
var r = restoredBitmap.GetPixel(x, y);
Assert.True(c.R == r.R && c.G == r.G && c.B == r.B);
}
}
}
Done();
}
}
IDataTransform Create(IHostEnvironment env, Arguments args, IDataView input, out IDataView sourceCtx)
{
sourceCtx = input;
Contracts.CheckValue(env, "env");
env.CheckValue(args, "args");
env.CheckValue(input, "input");
env.CheckValue(args.tag, "tag is empty");
env.CheckValue(args.trainer, "trainer",
"Trainer cannot be null. If your model is already trained, please use ScoreTransform instead.");
var views = TagHelper.EnumerateTaggedView(true, input).Where(c => c.Item1 == args.tag);
if (views.Any())
{
throw env.Except("Tag '{0}' is already used.", args.tag);
}
var host = env.Register("TagTrainOrScoreTransform");
using (var ch = host.Start("Train"))
{
ch.Trace("Constructing trainer");
var trainerSett = ScikitSubComponent <ITrainer, SignatureTrainer> .AsSubComponent(args.trainer);
ITrainer trainer = trainerSett.CreateInstance(host);
var customCols = TrainUtils.CheckAndGenerateCustomColumns(env, args.CustomColumn);
string feat;
string group;
var data = CreateDataFromArgs(_host, ch, new OpaqueDataView(input), args, out feat, out group);
ICalibratorTrainer calibrator = args.calibrator == null
? null
: ScikitSubComponent <ICalibratorTrainer, SignatureCalibrator> .AsSubComponent(args.calibrator).CreateInstance(host);
var nameTrainer = args.trainer.ToString().Replace("{", "").Replace("}", "").Replace(" ", "").Replace("=", "").Replace("+", "Y").Replace("-", "N");
var extTrainer = new ExtendedTrainer(trainer, nameTrainer);
_predictor = extTrainer.Train(host, ch, data, null, calibrator, args.maxCalibrationExamples);
if (!string.IsNullOrEmpty(args.outputModel))
{
ch.Info("Saving model into '{0}'", args.outputModel);
using (var fs = File.Create(args.outputModel))
TrainUtils.SaveModel(env, ch, fs, _predictor, data);
ch.Info("Done.");
}
if (_cali != null)
{
throw ch.ExceptNotImpl("Calibrator is not implemented yet.");
}
ch.Trace("Scoring");
if (_args.scorer != null)
{
var mapper = new SchemaBindablePredictorWrapper(_predictor);
var roles = new RoleMappedSchema(input.Schema, null, feat, group: group);
var bound = mapper.Bind(_host, roles);
var scorPars = ScikitSubComponent <IDataScorerTransform, SignatureDataScorer> .AsSubComponent(_args.scorer);
_scorer = scorPars.CreateInstance(_host, input, bound, roles);
}
else
{
_scorer = PredictorHelper.CreateDefaultScorer(_host, input, feat, group, _predictor);
}
ch.Info("Tagging with tag '{0}'.", args.tag);
var ar = new TagViewTransform.Arguments {
tag = args.tag
};
var res = new TagViewTransform(env, ar, _scorer, _predictor);
return(res);
}
}
public void TestOldSavingAndLoading()
{
var data = new[] {
new TestClass()
{
A = 1, B = 3, C = new float[2] {
1, 2
}, D = new double[2] {
3, 4
}
},
new TestClass()
{
A = float.NaN, B = double.NaN, C = new float[2] {
float.NaN, float.NaN
}, D = new double[2] {
double.NaN, double.NaN
}
},
new TestClass()
{
A = float.NegativeInfinity, B = double.NegativeInfinity, C = new float[2] {
float.NegativeInfinity, float.NegativeInfinity
}, D = new double[2] {
double.NegativeInfinity, double.NegativeInfinity
}
},
new TestClass()
{
A = float.PositiveInfinity, B = double.PositiveInfinity, C = new float[2] {
float.PositiveInfinity, float.PositiveInfinity,
}, D = new double[2] {
double.PositiveInfinity, double.PositiveInfinity
}
},
new TestClass()
{
A = 2, B = 1, C = new float[2] {
3, 4
}, D = new double[2] {
5, 6
}
},
};
var dataView = ComponentCreation.CreateDataView(Env, data);
var pipe = new NAReplaceEstimator(Env,
new NAReplaceTransform.ColumnInfo("A", "NAA", NAReplaceTransform.ColumnInfo.ReplacementMode.Mean),
new NAReplaceTransform.ColumnInfo("B", "NAB", NAReplaceTransform.ColumnInfo.ReplacementMode.Mean),
new NAReplaceTransform.ColumnInfo("C", "NAC", NAReplaceTransform.ColumnInfo.ReplacementMode.Mean),
new NAReplaceTransform.ColumnInfo("D", "NAD", NAReplaceTransform.ColumnInfo.ReplacementMode.Mean));
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
}
}
/// <summary>
/// Finalizes the test on a predictor, calls the predictor with a scorer,
/// saves the data, saves the models, loads it back, saves the data again,
/// checks the output is the same.
/// </summary>
/// <param name="env">environment</param>
/// <param name="outModelFilePath">output filename</param>
/// <param name="predictor">predictor</param>
/// <param name="roles">label, feature, ...</param>
/// <param name="outData">first output data</param>
/// <param name="outData2">second output data</param>
/// <param name="kind">prediction kind</param>
/// <param name="checkError">checks errors</param>
/// <param name="ratio">check the error is below that threshold (if checkError is true)</param>
/// <param name="ratioReadSave">check the predictions difference after reloading the model are below this threshold</param>
public static void FinalizeSerializationTest(IHostEnvironment env,
string outModelFilePath, IPredictor predictor,
RoleMappedData roles, string outData, string outData2,
PredictionKind kind, bool checkError = true,
float ratio = 0.8f, float ratioReadSave = 0.06f,
bool checkType = true)
{
string labelColumn = kind != PredictionKind.Clustering ? roles.Schema.Label.Value.Name : null;
#region save, reading, running
// Saves model.
using (var ch = env.Start("Save"))
using (var fs = File.Create(outModelFilePath))
TrainUtils.SaveModel(env, ch, fs, predictor, roles);
if (!File.Exists(outModelFilePath))
{
throw new FileNotFoundException(outModelFilePath);
}
// Loads the model back.
using (var fs = File.OpenRead(outModelFilePath))
{
var pred_local = ModelFileUtils.LoadPredictorOrNull(env, fs);
if (pred_local == null)
{
throw new Exception(string.Format("Unable to load '{0}'", outModelFilePath));
}
if (checkType && predictor.GetType() != pred_local.GetType())
{
throw new Exception(string.Format("Type mismatch {0} != {1}", predictor.GetType(), pred_local.GetType()));
}
}
// Checks the outputs.
var sch1 = SchemaHelper.ToString(roles.Schema.Schema);
var scorer = PredictorHelper.CreateDefaultScorer(env, roles, predictor);
var sch2 = SchemaHelper.ToString(scorer.Schema);
if (string.IsNullOrEmpty(sch1) || string.IsNullOrEmpty(sch2))
{
throw new Exception("Empty schemas");
}
var saver = env.CreateSaver("Text");
var columns = new int[scorer.Schema.Count];
for (int i = 0; i < columns.Length; ++i)
{
columns[i] = saver.IsColumnSavable(scorer.Schema[i].Type) ? i : -1;
}
columns = columns.Where(c => c >= 0).ToArray();
using (var fs2 = File.Create(outData))
saver.SaveData(fs2, scorer, columns);
if (!File.Exists(outModelFilePath))
{
throw new FileNotFoundException(outData);
}
// Check we have the same output.
using (var fs = File.OpenRead(outModelFilePath))
{
var model = ModelFileUtils.LoadPredictorOrNull(env, fs);
scorer = PredictorHelper.CreateDefaultScorer(env, roles, model);
saver = env.CreateSaver("Text");
using (var fs2 = File.Create(outData2))
saver.SaveData(fs2, scorer, columns);
}
var t1 = File.ReadAllLines(outData);
var t2 = File.ReadAllLines(outData2);
if (t1.Length != t2.Length)
{
throw new Exception(string.Format("Not the same number of lines: {0} != {1}", t1.Length, t2.Length));
}
var linesN = new List <int>();
for (int i = 0; i < t1.Length; ++i)
{
if (t1[i] != t2[i])
{
linesN.Add(i);
}
}
if (linesN.Count > (int)(t1.Length * ratioReadSave))
{
var rows = linesN.Select(i => string.Format("1-Mismatch on line {0}/{3}:\n{1}\n{2}", i, t1[i], t2[i], t1.Length)).ToList();
rows.Add($"Number of differences: {linesN.Count}/{t1.Length}");
throw new Exception(string.Join("\n", rows));
}
#endregion
#region clustering
if (kind == PredictionKind.Clustering)
{
// Nothing to do here.
return;
}
#endregion
#region supervized
string expectedOuput = kind == PredictionKind.Regression ? "Score" : "PredictedLabel";
// Get label and basic checking about performance.
using (var cursor = scorer.GetRowCursor(scorer.Schema))
{
int ilabel, ipred;
ilabel = SchemaHelper.GetColumnIndex(cursor.Schema, labelColumn);
ipred = SchemaHelper.GetColumnIndex(cursor.Schema, expectedOuput);
var ty1 = cursor.Schema[ilabel].Type;
var ty2 = cursor.Schema[ipred].Type;
var dist1 = new Dictionary <int, int>();
var dist2 = new Dictionary <int, int>();
var conf = new Dictionary <Tuple <int, int>, long>();
if (kind == PredictionKind.MulticlassClassification)
{
#region Multiclass
if (!ty2.IsKey())
{
throw new Exception(string.Format("Label='{0}' Predicted={1}'\nSchema: {2}", ty1, ty2, SchemaHelper.ToString(cursor.Schema)));
}
if (ty1.RawKind() == DataKind.Single)
{
var lgetter = cursor.GetGetter <float>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <uint>(SchemaHelper._dc(ipred, cursor));
float ans = 0;
uint pre = 0;
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
// The scorer +1 to the argmax.
++ans;
var key = new Tuple <int, int>((int)pre, (int)ans);
if (!conf.ContainsKey(key))
{
conf[key] = 1;
}
else
{
++conf[key];
}
if (!dist1.ContainsKey((int)ans))
{
dist1[(int)ans] = 1;
}
else
{
++dist1[(int)ans];
}
if (!dist2.ContainsKey((int)pre))
{
dist2[(int)pre] = 1;
}
else
{
++dist2[(int)pre];
}
}
}
else if (ty1.RawKind() == DataKind.UInt32 && ty1.IsKey())
{
var lgetter = cursor.GetGetter <uint>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <uint>(SchemaHelper._dc(ipred, cursor));
uint ans = 0;
uint pre = 0;
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
var key = new Tuple <int, int>((int)pre, (int)ans);
if (!conf.ContainsKey(key))
{
conf[key] = 1;
}
else
{
++conf[key];
}
if (!dist1.ContainsKey((int)ans))
{
dist1[(int)ans] = 1;
}
else
{
++dist1[(int)ans];
}
if (!dist2.ContainsKey((int)pre))
{
dist2[(int)pre] = 1;
}
else
{
++dist2[(int)pre];
}
}
}
else
{
throw new NotImplementedException(string.Format("Not implemented for type {0}", ty1.ToString()));
}
#endregion
}
else if (kind == PredictionKind.BinaryClassification)
{
#region binary classification
if (ty2.RawKind() != DataKind.Boolean)
{
throw new Exception(string.Format("Label='{0}' Predicted={1}'\nSchema: {2}", ty1, ty2, SchemaHelper.ToString(cursor.Schema)));
}
if (ty1.RawKind() == DataKind.Single)
{
var lgetter = cursor.GetGetter <float>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <bool>(SchemaHelper._dc(ipred, cursor));
float ans = 0;
bool pre = default(bool);
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
if (ans != 0 && ans != 1)
{
throw Contracts.Except("The problem is not binary, expected answer is {0}", ans);
}
var key = new Tuple <int, int>(pre ? 1 : 0, (int)ans);
if (!conf.ContainsKey(key))
{
conf[key] = 1;
}
else
{
++conf[key];
}
if (!dist1.ContainsKey((int)ans))
{
dist1[(int)ans] = 1;
}
else
{
++dist1[(int)ans];
}
if (!dist2.ContainsKey(pre ? 1 : 0))
{
dist2[pre ? 1 : 0] = 1;
}
else
{
++dist2[pre ? 1 : 0];
}
}
}
else if (ty1.RawKind() == DataKind.UInt32)
{
var lgetter = cursor.GetGetter <uint>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <bool>(SchemaHelper._dc(ipred, cursor));
uint ans = 0;
bool pre = default(bool);
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
if (ty1.IsKey())
{
--ans;
}
if (ans != 0 && ans != 1)
{
throw Contracts.Except("The problem is not binary, expected answer is {0}", ans);
}
var key = new Tuple <int, int>(pre ? 1 : 0, (int)ans);
if (!conf.ContainsKey(key))
{
conf[key] = 1;
}
else
{
++conf[key];
}
if (!dist1.ContainsKey((int)ans))
{
dist1[(int)ans] = 1;
}
else
{
++dist1[(int)ans];
}
if (!dist2.ContainsKey(pre ? 1 : 0))
{
dist2[pre ? 1 : 0] = 1;
}
else
{
++dist2[pre ? 1 : 0];
}
}
}
else if (ty1.RawKind() == DataKind.Boolean)
{
var lgetter = cursor.GetGetter <bool>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <bool>(SchemaHelper._dc(ipred, cursor));
bool ans = default(bool);
bool pre = default(bool);
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
var key = new Tuple <int, int>(pre ? 1 : 0, ans ? 1 : 0);
if (!conf.ContainsKey(key))
{
conf[key] = 1;
}
else
{
++conf[key];
}
if (!dist1.ContainsKey(ans ? 1 : 0))
{
dist1[ans ? 1 : 0] = 1;
}
else
{
++dist1[ans ? 1 : 0];
}
if (!dist2.ContainsKey(pre ? 1 : 0))
{
dist2[pre ? 1 : 0] = 1;
}
else
{
++dist2[pre ? 1 : 0];
}
}
}
else
{
throw new NotImplementedException(string.Format("Not implemented for type {0}", ty1));
}
#endregion
}
else if (kind == PredictionKind.Regression)
{
#region regression
if (ty1.RawKind() != DataKind.Single)
{
throw new Exception(string.Format("Label='{0}' Predicted={1}'\nSchema: {2}", ty1, ty2, SchemaHelper.ToString(cursor.Schema)));
}
if (ty2.RawKind() != DataKind.Single)
{
throw new Exception(string.Format("Label='{0}' Predicted={1}'\nSchema: {2}", ty1, ty2, SchemaHelper.ToString(cursor.Schema)));
}
var lgetter = cursor.GetGetter <float>(SchemaHelper._dc(ilabel, cursor));
var pgetter = cursor.GetGetter <float>(SchemaHelper._dc(ipred, cursor));
float ans = 0;
float pre = 0f;
float error = 0f;
while (cursor.MoveNext())
{
lgetter(ref ans);
pgetter(ref pre);
error += (ans - pre) * (ans - pre);
if (!dist1.ContainsKey((int)ans))
{
dist1[(int)ans] = 1;
}
else
{
++dist1[(int)ans];
}
if (!dist2.ContainsKey((int)pre))
{
dist2[(int)pre] = 1;
}
else
{
++dist2[(int)pre];
}
}
if (float.IsNaN(error) || float.IsInfinity(error))
{
throw new Exception("Regression wen wrong. Error is infinite.");
}
#endregion
}
else
{
throw new NotImplementedException(string.Format("Not implemented for kind {0}", kind));
}
var nbError = conf.Where(c => c.Key.Item1 != c.Key.Item2).Select(c => c.Value).Sum();
var nbTotal = conf.Select(c => c.Value).Sum();
if (checkError && (nbError * 1.0 > nbTotal * ratio || dist2.Count <= 1))
{
var sconf = string.Join("\n", conf.OrderBy(c => c.Key)
.Select(c => string.Format("pred={0} exp={1} count={2}", c.Key.Item1, c.Key.Item2, c.Value)));
var sdist2 = string.Join("\n", dist1.OrderBy(c => c.Key)
.Select(c => string.Format("label={0} count={1}", c.Key, c.Value)));
var sdist1 = string.Join("\n", dist2.OrderBy(c => c.Key).Take(20)
.Select(c => string.Format("label={0} count={1}", c.Key, c.Value)));
throw new Exception(string.Format("Too many errors {0}/{1}={7}\n###########\nConfusion:\n{2}\n########\nDIST1\n{3}\n###########\nDIST2\n{4}\nOutput:\n{5}\n...\n{6}",
nbError, nbTotal,
sconf, sdist1, sdist2,
string.Join("\n", t1.Take(Math.Min(30, t1.Length))),
string.Join("\n", t1.Skip(Math.Max(0, t1.Length - 30))),
nbError * 1.0 / nbTotal));
}
}
#endregion
}
public void TestOldSavingAndLoading()
{
if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
{
return;
}
var samplevector = getSampleArrayData();
var dataView = ComponentCreation.CreateDataView(Env,
new TestData[] {
new TestData()
{
data_0 = samplevector
}
});
var inputNames = "data_0";
var outputNames = "output_1";
var est = new DnnImageFeaturizerEstimator(Env, m => m.ModelSelector.ResNet18(m.Environment, m.InputColumn, m.OutputColumn), inputNames, outputNames);
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
loadedView.Schema.TryGetColumnIndex(outputNames, out int softMaxOut1);
using (var cursor = loadedView.GetRowCursor(col => col == softMaxOut1))
{
VBuffer <float> softMaxValue = default;
var softMaxGetter = cursor.GetGetter <VBuffer <float> >(softMaxOut1);
float sum = 0f;
int i = 0;
while (cursor.MoveNext())
{
softMaxGetter(ref softMaxValue);
var values = softMaxValue.DenseValues();
foreach (var val in values)
{
sum += val;
if (i == 0)
{
Assert.InRange(val, 0.0, 0.00001);
}
if (i == 7)
{
Assert.InRange(val, 0.62935, 0.62940);
}
if (i == 500)
{
Assert.InRange(val, 0.15521, 0.155225);
}
i++;
}
}
Assert.InRange(sum, 83.50, 84.50);
}
}
}
public void TestGreyscaleTransformImages()
{
using (var env = new ConsoleEnvironment())
{
var imageHeight = 150;
var imageWidth = 100;
var dataFile = GetDataPath("images/images.tsv");
var imageFolder = Path.GetDirectoryName(dataFile);
var data = TextLoader.Create(env, new TextLoader.Arguments()
{
Column = new[]
{
new TextLoader.Column("ImagePath", DataKind.TX, 0),
new TextLoader.Column("Name", DataKind.TX, 1),
}
}, new MultiFileSource(dataFile));
var images = ImageLoaderTransform.Create(env, new ImageLoaderTransform.Arguments()
{
Column = new ImageLoaderTransform.Column[1]
{
new ImageLoaderTransform.Column()
{
Source = "ImagePath", Name = "ImageReal"
}
},
ImageFolder = imageFolder
}, data);
var cropped = ImageResizerTransform.Create(env, new ImageResizerTransform.Arguments()
{
Column = new ImageResizerTransform.Column[1] {
new ImageResizerTransform.Column()
{
Name = "ImageCropped", Source = "ImageReal", ImageHeight = imageHeight, ImageWidth = imageWidth, Resizing = ImageResizerTransform.ResizingKind.IsoCrop
}
}
}, images);
IDataView grey = ImageGrayscaleTransform.Create(env, new ImageGrayscaleTransform.Arguments()
{
Column = new ImageGrayscaleTransform.Column[1] {
new ImageGrayscaleTransform.Column()
{
Name = "ImageGrey", Source = "ImageCropped"
}
}
}, cropped);
var fname = nameof(TestGreyscaleTransformImages) + "_model.zip";
var fh = env.CreateOutputFile(fname);
using (var ch = env.Start("save"))
TrainUtils.SaveModel(env, ch, fh, null, new RoleMappedData(grey));
grey = ModelFileUtils.LoadPipeline(env, fh.OpenReadStream(), new MultiFileSource(dataFile));
DeleteOutputPath(fname);
grey.Schema.TryGetColumnIndex("ImageGrey", out int greyColumn);
using (var cursor = grey.GetRowCursor((x) => true))
{
var bitmapGetter = cursor.GetGetter <Bitmap>(greyColumn);
Bitmap bitmap = default;
while (cursor.MoveNext())
{
bitmapGetter(ref bitmap);
Assert.NotNull(bitmap);
for (int x = 0; x < imageWidth; x++)
{
for (int y = 0; y < imageHeight; y++)
{
var pixel = bitmap.GetPixel(x, y);
// greyscale image has same values for R,G and B
Assert.True(pixel.R == pixel.G && pixel.G == pixel.B);
}
}
}
}
}
Done();
}
public void TestOldSavingAndLoading()
{
var data = new[] {
new TestClass()
{
A = 1, B = 3, C = new float[2] {
1, 2
}, D = new double[2] {
3, 4
}
},
new TestClass()
{
A = float.NaN, B = double.NaN, C = new float[2] {
float.NaN, float.NaN
}, D = new double[2] {
double.NaN, double.NaN
}
},
new TestClass()
{
A = float.NegativeInfinity, B = double.NegativeInfinity, C = new float[2] {
float.NegativeInfinity, float.NegativeInfinity
}, D = new double[2] {
double.NegativeInfinity, double.NegativeInfinity
}
},
new TestClass()
{
A = float.PositiveInfinity, B = double.PositiveInfinity, C = new float[2] {
float.PositiveInfinity, float.PositiveInfinity,
}, D = new double[2] {
double.PositiveInfinity, double.PositiveInfinity
}
},
new TestClass()
{
A = 2, B = 1, C = new float[2] {
3, 4
}, D = new double[2] {
5, 6
}
},
};
var dataView = ML.Data.LoadFromEnumerable(data);
var pipe = ML.Transforms.ReplaceMissingValues(
new MissingValueReplacingEstimator.ColumnOptions("NAA", "A", MissingValueReplacingEstimator.ColumnOptions.ReplacementMode.Mean),
new MissingValueReplacingEstimator.ColumnOptions("NAB", "B", MissingValueReplacingEstimator.ColumnOptions.ReplacementMode.Mean),
new MissingValueReplacingEstimator.ColumnOptions("NAC", "C", MissingValueReplacingEstimator.ColumnOptions.ReplacementMode.Mean),
new MissingValueReplacingEstimator.ColumnOptions("NAD", "D", MissingValueReplacingEstimator.ColumnOptions.ReplacementMode.Mean));
var result = pipe.Fit(dataView).Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
}
}
public void TestOldSavingAndLoading()
{
//skip running for x86 as this test using too much memory (over 2GB limit on x86)
//and very like to hit memory related issue when running on CI
//TODO: optimized memory usage in related code and enable x86 run
if (!Environment.Is64BitProcess)
{
return;
}
var samplevector = GetSampleArrayData();
var dataView = ML.Data.LoadFromEnumerable(
new TestData[] {
new TestData()
{
data_0 = samplevector
}
});
var inputNames = "data_0";
var outputNames = "output_1";
var est = ML.Transforms.DnnFeaturizeImage(outputNames, m => m.ModelSelector.ResNet18(m.Environment, m.OutputColumn, m.InputColumn), inputNames);
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
using (var cursor = loadedView.GetRowCursor(loadedView.Schema[outputNames]))
{
VBuffer <float> softMaxValue = default;
var softMaxGetter = cursor.GetGetter <VBuffer <float> >(loadedView.Schema[outputNames]);
float sum = 0f;
int i = 0;
while (cursor.MoveNext())
{
softMaxGetter(ref softMaxValue);
var values = softMaxValue.DenseValues();
foreach (var val in values)
{
sum += val;
if (i == 0)
{
Assert.InRange(val, 0.0, 0.00001);
}
if (i == 7)
{
Assert.InRange(val, 0.62935, 0.62940);
}
if (i == 500)
{
Assert.InRange(val, 0.15521, 0.155225);
}
i++;
}
}
Assert.InRange(sum, 83.50, 84.50);
}
}
}
public void TestBackAndForthConversionWithDifferentOrder()
{
IHostEnvironment env = new MLContext();
const int imageHeight = 100;
const int imageWidth = 130;
var dataFile = GetDataPath("images/images.tsv");
var imageFolder = Path.GetDirectoryName(dataFile);
var data = TextLoader.Create(env, new TextLoader.Options()
{
Columns = new[]
{
new TextLoader.Column("ImagePath", DataKind.String, 0),
new TextLoader.Column("Name", DataKind.String, 1),
}
}, new MultiFileSource(dataFile));
var images = new ImageLoadingTransformer(env, imageFolder, ("ImageReal", "ImagePath")).Transform(data);
var cropped = new ImageResizingTransformer(env, "ImageCropped", imageWidth, imageHeight, "ImageReal").Transform(images);
var pixels = new ImagePixelExtractingTransformer(env, "ImagePixels", "ImageCropped", ImagePixelExtractingEstimator.ColorBits.All, order: ImagePixelExtractingEstimator.ColorsOrder.ABRG).Transform(cropped);
IDataView backToBitmaps = new VectorToImageConvertingTransformer(env, "ImageRestored", imageHeight, imageWidth, "ImagePixels",
ImagePixelExtractingEstimator.ColorBits.All, order: ImagePixelExtractingEstimator.ColorsOrder.ABRG).Transform(pixels);
var fname = nameof(TestBackAndForthConversionWithDifferentOrder) + "_model.zip";
var fh = env.CreateOutputFile(fname);
using (var ch = env.Start("save"))
TrainUtils.SaveModel(env, ch, fh, null, new RoleMappedData(backToBitmaps));
backToBitmaps = ModelFileUtils.LoadPipeline(env, fh.OpenReadStream(), new MultiFileSource(dataFile));
DeleteOutputPath(fname);
using (var cursor = backToBitmaps.GetRowCursorForAllColumns())
{
var bitmapGetter = cursor.GetGetter <Bitmap>(backToBitmaps.Schema["ImageRestored"]);
Bitmap restoredBitmap = default;
var bitmapCropGetter = cursor.GetGetter <Bitmap>(backToBitmaps.Schema["ImageCropped"]);
Bitmap croppedBitmap = default;
while (cursor.MoveNext())
{
bitmapGetter(ref restoredBitmap);
Assert.NotNull(restoredBitmap);
bitmapCropGetter(ref croppedBitmap);
Assert.NotNull(croppedBitmap);
for (int x = 0; x < imageWidth; x++)
{
for (int y = 0; y < imageHeight; y++)
{
var c = croppedBitmap.GetPixel(x, y);
var r = restoredBitmap.GetPixel(x, y);
if (c != r)
{
Assert.False(true);
}
Assert.True(c == r);
}
}
}
}
Done();
}
public void TestOldSavingAndLoading(int?gpuDeviceId, bool fallbackToCpu)
{
var modelFile = "squeezenet/00000001/model.onnx";
var samplevector = GetSampleArrayData();
var dataView = ML.Data.LoadFromEnumerable(
new TestData[] {
new TestData()
{
data_0 = samplevector
}
});
var inputNames = new[] { "data_0" };
var outputNames = new[] { "softmaxout_1" };
var est = ML.Transforms.ApplyOnnxModel(outputNames, inputNames, modelFile, gpuDeviceId, fallbackToCpu);
var transformer = est.Fit(dataView);
var result = transformer.Transform(dataView);
var resultRoles = new RoleMappedData(result);
using (var ms = new MemoryStream())
{
TrainUtils.SaveModel(Env, Env.Start("saving"), ms, null, resultRoles);
ms.Position = 0;
var loadedView = ModelFileUtils.LoadTransforms(Env, dataView, ms);
var sofMaxOut1Col = loadedView.Schema[outputNames[0]];
using (var cursor = loadedView.GetRowCursor(sofMaxOut1Col))
{
VBuffer <float> softMaxValue = default;
var softMaxGetter = cursor.GetGetter <VBuffer <float> >(sofMaxOut1Col);
float sum = 0f;
int i = 0;
while (cursor.MoveNext())
{
softMaxGetter(ref softMaxValue);
var values = softMaxValue.DenseValues();
foreach (var val in values)
{
sum += val;
if (i == 0)
{
Assert.InRange(val, 0.00004, 0.00005);
}
if (i == 1)
{
Assert.InRange(val, 0.003844, 0.003845);
}
if (i == 999)
{
Assert.InRange(val, 0.0029566, 0.0029567);
}
i++;
}
}
Assert.InRange(sum, 0.99999, 1.00001);
}
(transformer as IDisposable)?.Dispose();
}
}
public void TestBackAndForthConversionWithAlphaNoInterleave()
{
using (var env = new ConsoleEnvironment())
{
var imageHeight = 100;
var imageWidth = 130;
var dataFile = GetDataPath("images/images.tsv");
var imageFolder = Path.GetDirectoryName(dataFile);
var data = TextLoader.Create(env, new TextLoader.Arguments()
{
Column = new[]
{
new TextLoader.Column("ImagePath", DataKind.TX, 0),
new TextLoader.Column("Name", DataKind.TX, 1),
}
}, new MultiFileSource(dataFile));
var images = ImageLoaderTransform.Create(env, new ImageLoaderTransform.Arguments()
{
Column = new ImageLoaderTransform.Column[1]
{
new ImageLoaderTransform.Column()
{
Source = "ImagePath", Name = "ImageReal"
}
},
ImageFolder = imageFolder
}, data);
var cropped = ImageResizerTransform.Create(env, new ImageResizerTransform.Arguments()
{
Column = new ImageResizerTransform.Column[1] {
new ImageResizerTransform.Column()
{
Source = "ImageReal", Name = "ImageCropped", ImageHeight = imageHeight, ImageWidth = imageWidth, Resizing = ImageResizerTransform.ResizingKind.IsoCrop
}
}
}, images);
var pixels = ImagePixelExtractorTransform.Create(env, new ImagePixelExtractorTransform.Arguments()
{
InterleaveArgb = false,
Offset = 127.5f,
Scale = 2f / 255,
Column = new ImagePixelExtractorTransform.Column[1] {
new ImagePixelExtractorTransform.Column()
{
Source = "ImageCropped", Name = "ImagePixels", UseAlpha = true
}
}
}, cropped);
IDataView backToBitmaps = new VectorToImageTransform(env, new VectorToImageTransform.Arguments()
{
InterleaveArgb = false,
Offset = -1f,
Scale = 255f / 2,
Column = new VectorToImageTransform.Column[1] {
new VectorToImageTransform.Column()
{
Source = "ImagePixels", Name = "ImageRestored", ImageHeight = imageHeight, ImageWidth = imageWidth, ContainsAlpha = true
}
}
}, pixels);
var fname = nameof(TestBackAndForthConversionWithAlphaNoInterleave) + "_model.zip";
var fh = env.CreateOutputFile(fname);
using (var ch = env.Start("save"))
TrainUtils.SaveModel(env, ch, fh, null, new RoleMappedData(backToBitmaps));
backToBitmaps = ModelFileUtils.LoadPipeline(env, fh.OpenReadStream(), new MultiFileSource(dataFile));
DeleteOutputPath(fname);
backToBitmaps.Schema.TryGetColumnIndex("ImageRestored", out int bitmapColumn);
backToBitmaps.Schema.TryGetColumnIndex("ImageCropped", out int cropBitmapColumn);
using (var cursor = backToBitmaps.GetRowCursor((x) => true))
{
var bitmapGetter = cursor.GetGetter <Bitmap>(bitmapColumn);
Bitmap restoredBitmap = default;
var bitmapCropGetter = cursor.GetGetter <Bitmap>(cropBitmapColumn);
Bitmap croppedBitmap = default;
while (cursor.MoveNext())
{
bitmapGetter(ref restoredBitmap);
Assert.NotNull(restoredBitmap);
bitmapCropGetter(ref croppedBitmap);
Assert.NotNull(croppedBitmap);
for (int x = 0; x < imageWidth; x++)
{
for (int y = 0; y < imageHeight; y++)
{
var c = croppedBitmap.GetPixel(x, y);
var r = restoredBitmap.GetPixel(x, y);
Assert.True(c == r);
}
}
}
}
}
Done();
}
public void TestBackAndForthConversionWithoutAlphaNoInterleave()
{
if (RuntimeInformation.IsOSPlatform(OSPlatform.OSX))
{
return;
}
IHostEnvironment env = new MLContext();
const int imageHeight = 100;
const int imageWidth = 130;
var dataFile = GetDataPath("images/images.tsv");
var imageFolder = Path.GetDirectoryName(dataFile);
var data = TextLoader.Create(env, new TextLoader.Options()
{
Columns = new[]
{
new TextLoader.Column("ImagePath", DataKind.String, 0),
new TextLoader.Column("Name", DataKind.String, 1),
}
}, new MultiFileSource(dataFile));
var images = new ImageLoadingTransformer(env, imageFolder, ("ImageReal", "ImagePath")).Transform(data);
var cropped = new ImageResizingTransformer(env, "ImageCropped", imageWidth, imageHeight, "ImageReal").Transform(images);
var pixels = new ImagePixelExtractingTransformer(env, "ImagePixels", "ImageCropped", scaleImage: 2f / 19, offsetImage: 30).Transform(cropped);
IDataView backToBitmaps = new VectorToImageConvertingTransformer(env, "ImageRestored", imageHeight, imageWidth, "ImagePixels",
scaleImage: 19 / 2f, offsetImage: -30).Transform(pixels);
var fname = nameof(TestBackAndForthConversionWithoutAlphaNoInterleave) + "_model.zip";
var fh = env.CreateOutputFile(fname);
using (var ch = env.Start("save"))
TrainUtils.SaveModel(env, ch, fh, null, new RoleMappedData(backToBitmaps));
backToBitmaps = ModelFileUtils.LoadPipeline(env, fh.OpenReadStream(), new MultiFileSource(dataFile));
DeleteOutputPath(fname);
using (var cursor = backToBitmaps.GetRowCursorForAllColumns())
{
var bitmapGetter = cursor.GetGetter <Bitmap>(backToBitmaps.Schema["ImageRestored"]);
Bitmap restoredBitmap = default;
var bitmapCropGetter = cursor.GetGetter <Bitmap>(backToBitmaps.Schema["ImageCropped"]);
Bitmap croppedBitmap = default;
while (cursor.MoveNext())
{
bitmapGetter(ref restoredBitmap);
Assert.NotNull(restoredBitmap);
bitmapCropGetter(ref croppedBitmap);
Assert.NotNull(croppedBitmap);
for (int x = 0; x < imageWidth; x++)
{
for (int y = 0; y < imageHeight; y++)
{
var c = croppedBitmap.GetPixel(x, y);
var r = restoredBitmap.GetPixel(x, y);
Assert.True(c.R == r.R && c.G == r.G && c.B == r.B);
}
}
}
}
Done();
}
/// <summary>
/// Finalize the test on a transform, calls the transform,
/// saves the data, saves the models, loads it back, saves the data again,
/// checks the output is the same.
/// </summary>
/// <param name="env">environment</param>
/// <param name="outModelFilePath"model filename</param>
/// <param name="transform">transform to test</param>
/// <param name="source">source (view before applying the transform</param>
/// <param name="outData">fist data file</param>
/// <param name="outData2">second data file</param>
/// <param name="startsWith">Check that outputs is the same on disk after outputting the transformed data after the model was serialized</param>
public static void SerializationTestTransform(IHostEnvironment env,
string outModelFilePath, IDataTransform transform,
IDataView source, string outData, string outData2,
bool startsWith = false, bool skipDoubleQuote = false,
bool forceDense = false)
{
// Saves model.
var roles = env.CreateExamples(transform, null);
using (var ch = env.Start("SaveModel"))
using (var fs = File.Create(outModelFilePath))
TrainUtils.SaveModel(env, ch, fs, null, roles);
if (!File.Exists(outModelFilePath))
{
throw new FileNotFoundException(outModelFilePath);
}
// We load it again.
using (var fs = File.OpenRead(outModelFilePath))
{
var tr2 = env.LoadTransforms(fs, source);
if (tr2 == null)
{
throw new Exception(string.Format("Unable to load '{0}'", outModelFilePath));
}
if (transform.GetType() != tr2.GetType())
{
throw new Exception(string.Format("Type mismatch {0} != {1}", transform.GetType(), tr2.GetType()));
}
}
// Checks the outputs.
var saver = env.CreateSaver(forceDense ? "Text{dense=+}" : "Text");
var columns = new int[transform.Schema.Count];
for (int i = 0; i < columns.Length; ++i)
{
columns[i] = i;
}
using (var fs2 = File.Create(outData))
saver.SaveData(fs2, transform, columns);
if (!File.Exists(outModelFilePath))
{
throw new FileNotFoundException(outData);
}
// Check we have the same output.
using (var fs = File.OpenRead(outModelFilePath))
{
var tr = env.LoadTransforms(fs, source);
saver = env.CreateSaver(forceDense ? "Text{dense=+}" : "Text");
using (var fs2 = File.Create(outData2))
saver.SaveData(fs2, tr, columns);
}
var t1 = File.ReadAllLines(outData);
var t2 = File.ReadAllLines(outData2);
if (t1.Length != t2.Length)
{
throw new Exception(string.Format("Not the same number of lines: {0} != {1}", t1.Length, t2.Length));
}
for (int i = 0; i < t1.Length; ++i)
{
if (skipDoubleQuote && (t1[i].Contains("\"\"\t\"\"") || t2[i].Contains("\"\"\t\"\"")))
{
continue;
}
if ((startsWith && !t1[i].StartsWith(t2[i])) || (!startsWith && t1[i] != t2[i]))
{
if (t1[i].EndsWith("\t5\t0:\"\""))
{
var a = t1[i].Substring(0, t1[i].Length - "\t5\t0:\"\"".Length);
a += "\t\"\"\t\"\"\t\"\"\t\"\"\t\"\"";
var b = t2[i];
if ((startsWith && !a.StartsWith(b)) || (!startsWith && a != b))
{
throw new Exception(string.Format("2-Mismatch on line {0}/{3}:\n{1}\n{2}", i, t1[i], t2[i], t1.Length));
}
}
else
{
// The test might fail because one side is dense and the other is sparse.
throw new Exception(string.Format("3-Mismatch on line {0}/{3}:\n{1}\n{2}", i, t1[i], t2[i], t1.Length));
}
}
}
}
