public override void Apply(TilemapStructure tilemap)
{
var groundTilemap = tilemap.Grid.Tilemaps[TilemapType.Ground];
var random = new System.Random(tilemap.Grid.Seed);
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
foreach (var tree in TreeSelection)
{
var groundTile = groundTilemap.GetTile(x, y);
if (tree.SpawnOnGrounds.Any(tile => (int)tile == groundTile))
{
// Do a random chance check
if (random.Next(0, 100) <= tree.SpawnChancePerCell)
{
tilemap.SetTile(x, y, (int)tree.Tree);
}
// We don't break here, because other tree selections can still overrule this one.
}
}
}
}
}
public override void Apply(TilemapStructure tilemap)
{
int targetTileId = (int)TargetTile;
int replaceTileId = (int)ReplacedBy;
for (int i = 0; i < Repetitions; i++)
{
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
// Check if the current tile is our target tile
var tile = tilemap.GetTile(x, y);
if (tile == targetTileId)
{
// Retrieve all 8 neighbors of our current tile
var neighbors = tilemap.GetNeighbors(x, y);
// Count all the neighbors that are of type target tile
int targetTilesCount = neighbors.Count(a => a.Value == targetTileId);
// If the min alive count is not reached, we replace the tile
if (targetTilesCount < MinAlive)
{
if (ReplaceByDominantTile)
{
// Group tiles on tiletype, then order them in descending order based on group size
// Select the group's key which is the tiletype because thats what we grouped on
// And select the first one (first group's key), because that's the dominant tile type
var dominantTile = neighbors
.GroupBy(a => a.Value)
.OrderByDescending(a => a.Count())
.Select(a => a.Key)
.First();
tilemap.SetTile(x, y, dominantTile);
}
else
{
tilemap.SetTile(x, y, replaceTileId);
}
}
}
}
}
}
}
public override void Apply(TilemapStructure tilemap)
{
_random = new System.Random(tilemap.Grid.Seed);
// Re-create the heightmap from our tilemap
var heightmap = Noise.GenerateNoiseMap(tilemap.Width, tilemap.Height, tilemap.Grid.Seed, GroundHeightmap.NoiseScale, GroundHeightmap.Octaves, GroundHeightmap.Persistance, GroundHeightmap.Lacunarity, GroundHeightmap.Offset);
if (GroundHeightmap.ApplyIslandGradient)
{
var islandGradient = Noise.GenerateIslandGradientMap(tilemap.Width, tilemap.Height);
for (int x = 0, y; x < tilemap.Width; x++)
{
for (y = 0; y < tilemap.Height; y++)
{
// Subtract the islandGradient value from the noiseMap value
float subtractedValue = heightmap[y * tilemap.Width + x] - islandGradient[y * tilemap.Width + x];
// Apply it into the map, but make sure we clamp it between 0f and 1f
heightmap[y * tilemap.Width + x] = Mathf.Clamp01(subtractedValue);
}
}
}
// Get all start positions
var validStartPositions = TilemapHelper.GetTilesByType(tilemap, StartingTileTypes.Select(a => (int)a));
var amountOfRivers = _random.Next(MinRiverQuota, MaxRiverQuota + 1);
var rivers = new List <DownstreamRiver>();
for (int i = 0; i < amountOfRivers; i++)
{
// Get valid startPoint with respect to distance between existing rivers
var startPoint = GetValidStartPosition(validStartPositions, rivers);
if (!startPoint.HasValue)
{
break;
}
// Build river from start based on heightmap
var river = new DownstreamRiver(startPoint.Value);
if (river.Build(tilemap, heightmap))
{
rivers.Add(river);
}
}
// Set river tiles into tilemap
int riverTileId = (int)GroundTileType.River;
foreach (var riverPosition in rivers.SelectMany(a => a.RiverPositions))
{
tilemap.SetTile(riverPosition.x, riverPosition.y, riverTileId);
}
}
/// <summary>
/// 모래 타일, 물 타일, 풀 타일 뭐 등등 그 중에 풀 타일을 골라
/// 10x10 그리드에 각 셀 하나하나 그 타일의 8개의 이웃타일에게 얼마나 많이 같은 타입이 있는지 세고
/// 그 숫자를 통해 타일들을 같은 타입으로 두냐 아니냐를 선택한다.
/// </summary>
/// <param name="tilemap"></param>
public override void Apply(TilemapStructure tilemap)
{
int targetTileId = (int)TargetTile;
int replaceTileId = (int)ReplaceBy;
for (int i = 0; i < Reptitions; i++)
{
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
var tile = tilemap.GetTile(x, y);
if (tile == targetTileId)
{
var neighbors = tilemap.GetNeighbors(x, y);
int targetTilesCount = neighbors.Count(a => a.Value == targetTileId);
// 만약 minAlive 숫자가 도달하지 못하면 타일을 교체한다
if (targetTilesCount < minAlive)
{
if (ReplaceByDominantTile)
{
int dominantTile = neighbors
.GroupBy(a => a.Value)
.OrderByDescending(a => a.Count())
.Select(a => a.Key)
.First();
tilemap.SetTile(x, y, dominantTile);
}
else
{
tilemap.SetTile(x, y, replaceTileId);
}
}
}
}
}
}
}
public void Apply(TilemapStructure tilemap)
{
var validEnumValues = (GroundTileType[])Enum.GetValues(typeof(GroundTileType));
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
var randomValue = (int)validEnumValues[UnityEngine.Random.Range(0, validEnumValues.Length)];
tilemap.SetTile(x, y, randomValue);
}
}
}
public override void Apply(TilemapStructure tilemap)
{
TileTypeEnum[] validEnumValues = (TileTypeEnum[])Enum.GetValues(typeof(TileTypeEnum));
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
int randomValue = (int)validEnumValues[UnityEngine.Random.Range(0, validEnumValues.Length)];
tilemap.SetTile(x, y, randomValue);
}
}
}
public override void Apply(TilemapStructure tilemap)
{
// Make sure that TileTypes are ordered from small to high height
TileTypes = TileTypes.OrderBy(a => a.Height).ToArray();
// Pass along our parameters to generate our noise
var noiseMap = Noise.GenerateNoiseMap(tilemap.Width, tilemap.Height, tilemap.Grid.Seed, NoiseScale, Octaves, Persistance, Lacunarity, Offset);
if (ApplyIslandGradient)
{
var islandGradient = Noise.GenerateIslandGradientMap(tilemap.Width, tilemap.Height);
for (int x = 0, y; x < tilemap.Width; x++)
{
for (y = 0; y < tilemap.Height; y++)
{
// Subtract the islandGradient value from the noiseMap value
float subtractedValue = noiseMap[y * tilemap.Width + x] - islandGradient[y * tilemap.Width + x];
// Apply it into the map, but make sure we clamp it between 0f and 1f
noiseMap[y * tilemap.Width + x] = Mathf.Clamp01(subtractedValue);
}
}
}
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
// Get height at this position
var height = noiseMap[y * tilemap.Width + x];
// Loop over our configured tile types
for (int i = 0; i < TileTypes.Length; i++)
{
// If the height is smaller or equal then use this tiletype
if (height <= TileTypes[i].Height)
{
tilemap.SetTile(x, y, (int)TileTypes[i].GroundTile);
break;
}
}
}
}
}
public override void Apply(TilemapStructure tilemap)
{
_random = new System.Random(tilemap.Grid.Seed);
var rivers = new List <DrunkenRiver>();
var validStartPositions = TilemapHelper.GetTilesByType(tilemap, StartingTileTypes.Select(a => (int)a));
var amountOfRivers = _random.Next(MinRiverQuota, MaxRiverQuota + 1);
for (int i = 0; i < amountOfRivers; i++)
{
// Get valid startPoint with respect to distance between existing rivers
var startPoint = GetValidStartPosition(validStartPositions, rivers);
if (!startPoint.HasValue)
{
break;
}
// Find valid endPos (closest deep water tile to startPos)
var endPos = TilemapHelper.FindClosestTileByType(tilemap, startPoint.Value, (int)GroundTileType.DeepWater);
if (!endPos.HasValue)
{
break;
}
// Build river from start to end position
var river = new DrunkenRiver(_random, RiverDriftChance, startPoint.Value, endPos.Value);
if (river.Build())
{
rivers.Add(river);
}
}
// Set river tiles into tilemap
int riverTileId = (int)GroundTileType.River;
foreach (var riverPosition in rivers.SelectMany(a => a.RiverPositions))
{
tilemap.SetTile(riverPosition.x, riverPosition.y, riverTileId);
}
}
public override void Apply(TilemapStructure tilemap)
{
// Make sure TileType ordered from small to high height
tileTypes = tileTypes.OrderBy(a => a.Height).ToArray();
float[] noiseMap = Noise.GenerateNoiseMap(tilemap.Width, tilemap.Height, tilemap.grid.Seed, NoiseScale, Octaves, Persistance, Lacunarity, Offset);
if (ApplyIslandGradient)
{
float[] islandGradient = Noise.GenerateIslandGradientMap(tilemap.Width, tilemap.Height);
for (int x = 0, y; x < tilemap.Width; x++)
{
for (y = 0; y < tilemap.Height; y++)
{
float subtractedValue = noiseMap[y * tilemap.Width + x] - islandGradient[y * tilemap.Width + x];
// make sure Clamp to 0f~ 1f;
noiseMap[y * tilemap.Width + x] = Mathf.Clamp01(subtractedValue);
}
}
}
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
float height = noiseMap[y * tilemap.Width + x];
for (int i = 0; i < tileTypes.Length; i++)
{
if (height <= tileTypes[i].Height)
{
tilemap.SetTile(x, y, (int)tileTypes[i].tileTypeEnum);
break;
}
}
}
}
}
public override void Apply(TilemapStructure tilemap)
{
// Make sure TileType ordered from small to high height
tileTypes = tileTypes.OrderBy(a => a.Height).ToArray();
var noiseMap = Noise.GenerateNoiseMap(tilemap.Width, tilemap.Height, tilemap.Seed, NoiseScale, Octaves, Persistance, Lacunarity, Offset);
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
var height = noiseMap[y * tilemap.Width + x];
for (int i = 0; i < tileTypes.Length; i++)
{
if (height <= tileTypes[i].Height)
{
tilemap.SetTile(x, y, (int)tileTypes[i].tileTypeEnum);
break;
}
}
}
}
}
// Create Random Tile
public override void Apply(TilemapStructure tilemap)
{
TilemapStructure groundTilemap = tilemap.grid.TilemapType[TilemapType.Ground];
var random = new System.Random(tilemap.grid.Seed);
for (int x = 0; x < tilemap.Width; x++)
{
for (int y = 0; y < tilemap.Height; y++)
{
foreach (var spawnThing in spawnConfigulations)
{
int groundTile = groundTilemap.GetTile(x, y);
if (spawnThing.spawnTileType.Any(tile => (int)tile == groundTile)) // 타일 중 하나라도 groundTile이랑 같다면
{
if (random.Next(0, 100) <= spawnThing.SpawnChancePerCell)
{
tilemap.SetTile(x, y, (int)spawnThing.objectType);
}
}
}
}
}
}
