/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommandType">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommandType)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
//将ptz命令转换成T28181的命令
T28181PTZCmd cmd = new T28181PTZCmd(ptzCommandType, 0);
string ptzCmd = cmd.ToString();
//控制权限级别设为1
int result = sipStack.PtzControl(cameraNo, ptzCmd, "1");
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Stop control ptz success.Camera No:{0}.", cameraNo);
}
else
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return(err);
}
return(err);
}
/// <summary>
/// 开始云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommandType">命令类型</param>
/// <param name="param">命令参数，速度或倍数</param>
/// <returns></returns>
public SmcErr StartControlPtz(string cameraNo, PtzCommandType ptzCommand, int param)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.StartControlPtz({0},{1},{2}).", cameraNo, ptzCommand, param);
SmcErr err = new CgwError();
//将ptz命令转换成T28181的命令
T28181PTZCmd cmd = new T28181PTZCmd(ptzCommand, param);
string ptzCmd = cmd.ToString();
logEx.Trace("Call T28181VideoMonitor.StartPtzControl({0},{1},{2}).", cameraNo, Enum.GetName(typeof(PtzCommandType), (int)ptzCommand), param);
//控制权限级别设为1
int result = sipStack.PtzControl(cameraNo, ptzCmd, "1");
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Start control ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("Start control ptz failed.Camera No:{0}.T28181VideoMonitor error code：{1}.", cameraNo, result);
return(err);
}
return(err);
}
/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommandType">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommandType)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
//将ptz命令转换成T28181的命令
T28181PTZCmd cmd = new T28181PTZCmd(ptzCommandType, 0);
string ptzCmd = cmd.ToString();
//控制权限级别设为1
int result = sipStack.PtzControl(cameraNo, ptzCmd, "1");
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Stop control ptz success.Camera No:{0}.", cameraNo);
}
else
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return err;
}
return err;
}
/// <summary>
/// 开始云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommandType">命令类型</param>
/// <param name="param">命令参数，速度或倍数</param>
/// <returns></returns>
public SmcErr StartControlPtz(string cameraNo, PtzCommandType ptzCommand, int param)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.StartControlPtz({0},{1},{2}).", cameraNo, ptzCommand, param);
SmcErr err = new CgwError();
//将ptz命令转换成T28181的命令
T28181PTZCmd cmd = new T28181PTZCmd(ptzCommand, param);
string ptzCmd = cmd.ToString();
logEx.Trace("Call T28181VideoMonitor.StartPtzControl({0},{1},{2}).", cameraNo, Enum.GetName(typeof(PtzCommandType), (int)ptzCommand), param);
//控制权限级别设为1
int result = sipStack.PtzControl(cameraNo, ptzCmd, "1");
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Start control ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("Start control ptz failed.Camera No:{0}.T28181VideoMonitor error code：{1}.", cameraNo, result);
return err;
}
return err;
}