private static Shapes.XFormCells _SnapCorner(SnapCornerPosition corner, Drawing.Point new_lower_left, Shapes.XFormCells input_xfrm)
{
var new_pin_position = ArrangeHelper.GetPinPositionForCorner(input_xfrm, new_lower_left, corner);
var output_xfrm = new Shapes.XFormCells();
if (new_pin_position.X != input_xfrm.PinX.Result)
{
output_xfrm.PinX = new_pin_position.X;
}
if (new_pin_position.Y != input_xfrm.PinY.Result)
{
output_xfrm.PinY = new_pin_position.Y;
}
return(output_xfrm);
}
public void SnapCorner(TargetShapes targets, double w, double h, SnapCornerPosition corner)
{
this._client.Application.AssertApplicationAvailable();
this._client.Document.AssertDocumentAvailable();
var shapes = targets.ResolveShapes2D(this._client);
if (shapes.Shapes.Count < 1)
{
return;
}
var application = this._client.Application.Get();
var page = application.ActivePage;
var target_ids = targets.ToShapeIDs();
using (var undoscope = this._client.Application.NewUndoScope("Snap Shape Corner"))
{
ArrangeHelper.SnapCorner(page, target_ids, new Drawing.Size(w, h), corner);
}
}
public void SnapCorner(IList<IVisio.Shape> target_shapes, double w, double h, SnapCornerPosition corner)
{
this.Client.Application.AssertApplicationAvailable();
this.Client.Document.AssertDocumentAvailable();
var shapes = this.GetTargetShapes2D(target_shapes);
if (shapes.Count < 1)
{
return;
}
var shapeids = shapes.Select(s => s.ID).ToList();
var application = this.Client.Application.Get();
using (var undoscope = this.Client.Application.NewUndoScope("SnapCorner"))
{
var active_page = application.ActivePage;
ArrangeHelper.SnapCorner(active_page, shapeids, new Drawing.Size(w, h), corner);
}
}
public void SnapCorner(IList <IVisio.Shape> target_shapes, double w, double h, SnapCornerPosition corner)
{
this.Client.Application.AssertApplicationAvailable();
this.Client.Document.AssertDocumentAvailable();
var shapes = this.GetTargetShapes2D(target_shapes);
if (shapes.Count < 1)
{
return;
}
var shapeids = shapes.Select(s => s.ID).ToList();
var application = this.Client.Application.Get();
using (var undoscope = this.Client.Application.NewUndoScope("SnapCorner"))
{
var active_page = application.ActivePage;
ArrangeHelper.SnapCorner(active_page, shapeids, new Drawing.Size(w, h), corner);
}
}
private static Drawing.Point GetPinPositionForCorner(Shapes.XFormCells input_xfrm, Drawing.Point new_lower_left, SnapCornerPosition corner)
{
var size = new Drawing.Size(input_xfrm.Width.Result, input_xfrm.Height.Result);
var locpin = new Drawing.Point(input_xfrm.LocPinX.Result, input_xfrm.LocPinY.Result);
switch (corner)
{
case SnapCornerPosition.LowerLeft:
{
return new_lower_left.Add(locpin.X, locpin.Y);
}
case SnapCornerPosition.UpperRight:
{
return new_lower_left.Subtract(size.Width, size.Height).Add(locpin.X, locpin.Y);
}
case SnapCornerPosition.LowerRight:
{
return new_lower_left.Subtract(size.Width, 0).Add(locpin.X, locpin.Y);
}
case SnapCornerPosition.UpperLeft:
{
return new_lower_left.Subtract(0, size.Height).Add(locpin.X, locpin.Y);
}
default:
{
throw new System.ArgumentOutOfRangeException(nameof(corner), "Unsupported corner");
}
}
}
private static Shapes.XFormCells _SnapCorner(SnapCornerPosition corner, Drawing.Point new_lower_left, Shapes.XFormCells input_xfrm)
{
var new_pin_position = ArrangeHelper.GetPinPositionForCorner(input_xfrm, new_lower_left, corner);
var output_xfrm = new Shapes.XFormCells();
if (new_pin_position.X != input_xfrm.PinX.Result)
{
output_xfrm.PinX = new_pin_position.X;
}
if (new_pin_position.Y != input_xfrm.PinY.Result)
{
output_xfrm.PinY = new_pin_position.Y;
}
return output_xfrm;
}
public static void SnapCorner(IVisio.Page page, IList<int> shapeids, Drawing.Size snapsize, SnapCornerPosition corner)
{
// First caculate the new transforms
var snap_grid = new Drawing.SnappingGrid(snapsize);
var input_xfrms = Shapes.XFormCells.GetCells(page, shapeids);
var output_xfrms = new List<Shapes.XFormCells>(input_xfrms.Count);
foreach (var input_xfrm in input_xfrms)
{
var old_rect = ArrangeHelper.GetRectangle(input_xfrm);
var old_lower_left = old_rect.LowerLeft;
var new_lower_left = snap_grid.Snap(old_lower_left);
var output_xfrm = ArrangeHelper._SnapCorner(corner, new_lower_left, input_xfrm);
output_xfrms.Add(output_xfrm);
}
// Now apply them
ArrangeHelper.update_xfrms(page, shapeids, output_xfrms);
}
private static Drawing.Point GetPinPositionForCorner(ShapeXFormData input_xfrm, Drawing.Point new_lower_left, SnapCornerPosition corner)
{
var size = new Drawing.Size(input_xfrm.Width, input_xfrm.Height);
var locpin = new Drawing.Point(input_xfrm.LocPinX, input_xfrm.LocPinY);
switch (corner)
{
case SnapCornerPosition.LowerLeft:
{
return(new_lower_left.Add(locpin.X, locpin.Y));
}
case SnapCornerPosition.UpperRight:
{
return(new_lower_left.Subtract(size.Width, size.Height).Add(locpin.X, locpin.Y));
}
case SnapCornerPosition.LowerRight:
{
return(new_lower_left.Subtract(size.Width, 0).Add(locpin.X, locpin.Y));
}
case SnapCornerPosition.UpperLeft:
{
return(new_lower_left.Subtract(0, size.Height).Add(locpin.X, locpin.Y));
}
default:
{
throw new System.ArgumentOutOfRangeException(nameof(corner), "Unsupported corner");
}
}
}
public static void SnapCorner(IVisio.Page page, TargetShapeIDs target, Drawing.Size snapsize, SnapCornerPosition corner)
{
// First caculate the new transforms
var snap_grid = new SnappingGrid(snapsize);
var input_xfrms = ShapeXFormData.Get(page, target);
var output_xfrms = new List <VisioAutomation.Drawing.Point>(input_xfrms.Count);
foreach (var input_xfrm in input_xfrms)
{
var old_rect = input_xfrm.GetRectangle();
var old_lower_left = old_rect.LowerLeft;
var new_lower_left = snap_grid.Snap(old_lower_left);
var new_pin_position = ArrangeHelper.GetPinPositionForCorner(input_xfrm, new_lower_left, corner);
var output_xfrm = new VisioAutomation.Drawing.Point(new_pin_position.X, new_pin_position.Y);
output_xfrms.Add(output_xfrm);
}
ModifyPinPositions(page, target.ShapeIDs, output_xfrms);
}
public static void SnapCorner(IVisio.Page page, IList <int> shapeids, Drawing.Size snapsize, SnapCornerPosition corner)
{
// First caculate the new transforms
var snap_grid = new Drawing.SnappingGrid(snapsize);
var input_xfrms = Shapes.XFormCells.GetCells(page, shapeids);
var output_xfrms = new List <Shapes.XFormCells>(input_xfrms.Count);
foreach (var input_xfrm in input_xfrms)
{
var old_rect = ArrangeHelper.GetRectangle(input_xfrm);
var old_lower_left = old_rect.LowerLeft;
var new_lower_left = snap_grid.Snap(old_lower_left);
var output_xfrm = ArrangeHelper._SnapCorner(corner, new_lower_left, input_xfrm);
output_xfrms.Add(output_xfrm);
}
// Now apply them
ArrangeHelper.update_xfrms(page, shapeids, output_xfrms);
}