internal static void Display(Vector2 displayViewerPosition)
{
// Reset Tooltip active flag...
ToolTipActive = false;
_canShowToolTips = WindowSettings.ShowToolTips && ShowToolTips;
Position = WindowSettings.Position;
int scrollX = 20;
GUI.enabled = true;
if (!SMSettings.LockSettings)
{
// "Realism Settings / Options"
GUILayout.Label(SmUtils.SmTags["#smloc_settings_realism_001"], SMStyle.LabelTabHeader);
}
else
{
// "Realism Settings / Options (Locked. To unlock, edit SMSettings.dat file)"
GUILayout.Label(
new GUIContent(SmUtils.SmTags["#smloc_settings_realism_002"],
SmUtils.SmTags["#smloc_settings_realism_tt_001"]), SMStyle.LabelTabHeader);
}
GUILayout.Label("____________________________________________________________________________________________",
SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));
bool isEnabled = !SMSettings.LockSettings;
//RealismMode Buttons.
DisplayRealismButtons();
GUILayout.Label("____________________________________________________________________________________________",
SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));
// RealXfers Mode
GUI.enabled = isEnabled;
//_label = "Realistic Transfers";
//_toolTip = "Turns on/off Realistic Resource Transfers.";
//_toolTip += "\r\nWhen ON, Resource fills, Dumps, Crew and Science transfers will behave realistically";
//_toolTip += "\r\nWhen Off, Allows Fills, Dumps, Repeating Science,";
//_toolTip += "\r\ninstantaneous Xfers, Crew Xfers anywwhere, etc.";
_label = SmUtils.SmTags["#smloc_settings_realism_008"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_007"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.RealXfers = GUILayout.Toggle(SMSettings.RealXfers, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
// RealControl Mode
GUI.enabled = isEnabled;
//_label = "Realistic Control";
//_toolTip = "Turns on/off Realistic Shipboard Control.";
//_toolTip += "\r\nWhen ON, you must have crew aboard, or a valid comm link to a control station or satellite";
//_toolTip += "\r\nWhen Off, you have full control of the vessel at any time (subject to the availability of resources).";
_label = SmUtils.SmTags["#smloc_settings_realism_009"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_008"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.RealControl = GUILayout.Toggle(SMSettings.RealControl, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
// EnableCrew Modifications
GUI.enabled = isEnabled;
GUILayout.BeginHorizontal();
//_label = "Enable Roster Modifications";
//_toolTip = "Enables/Disable Crew Modifications in the Roster Window.";
//_toolTip += "\r\nWhen ON, You cannot Edit, Create, or Respawn Crew members.";
//_toolTip += "\r\nWhen Off, You can Edit, Create, or Respawn Crew members.";
_label = SmUtils.SmTags["#smloc_settings_realism_010"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_009"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableCrewModify = GUILayout.Toggle(SMSettings.EnableCrewModify, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
//_label = "Enable Kerbal Renaming";
//_toolTip = "Allows renaming a Kerbal.";
_label = SmUtils.SmTags["#smloc_settings_realism_011"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_010"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableKerbalRename = GUILayout.Toggle(SMSettings.EnableKerbalRename, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.BeginHorizontal();
//_label = "Enable Profession management";
//_toolTip = "When On, SM allows you to change a Kerbal's profession.";
_label = SmUtils.SmTags["#smloc_settings_realism_012"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_011"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableChangeProfession = GUILayout.Toggle(SMSettings.EnableChangeProfession, _guiLabel,
GUILayout.Width(guiToggleWidth));
GUILayout.EndHorizontal();
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUI.enabled = true;
// Enable stock Crew Xfers
GUI.enabled = SMSettings.EnableCrew && isEnabled;
GUILayout.BeginHorizontal();
//_label = "Enable Stock Crew Xfers";
//_toolTip = "Turns On/Off the stock Crew Transfer mechanism.";
//_toolTip += "\r\nWhen ON stock crew transfers will be Allowed.";
//_toolTip += "\r\nWhen OFF Stock Crew transfers are disabled.";
_label = SmUtils.SmTags["#smloc_settings_realism_013"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_012"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableStockCrewXfer = GUILayout.Toggle(SMSettings.EnableStockCrewXfer, _guiLabel,
GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// EnableCrew Xfer Mode
GUI.enabled = isEnabled;
GUILayout.BeginHorizontal();
//_label = "Enable SM Crew Xfers";
//_toolTip = "Turns on/off Crew transfers using SM.";
//_toolTip += "\r\nWhen ON, The Crew option will appear in your resource list.";
//_toolTip += "\r\nWhen Off, Crew transfers are not possible using SM.";
_label = SmUtils.SmTags["#smloc_settings_realism_014"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_013"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableCrew = GUILayout.Toggle(SMSettings.EnableCrew, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (!SMSettings.EnableCrew && HighLogic.LoadedSceneIsFlight)
{
if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()))
{
// Clear Resource selection.
SMHighlighter.ClearResourceHighlighting(SMAddon.SmVessel.SelectedResourcesParts);
SMAddon.SmVessel.SelectedResources.Clear();
WindowTransfer.ShowWindow = false;
}
}
// Set Gui.enabled for child settings to resources...
GUI.enabled = SMSettings.EnableCrew && isEnabled;
// EnablePFResources Mode
GUILayout.BeginHorizontal();
GUILayout.Space(20);
//_label = "Enable Crew Fill and Empty Ops in Pre-Flight";
//_toolTip = "Turns on/off Fill and Empty Crew when in preflight.";
//_toolTip += "\r\nWhen ON, Fill & Empty Crew vessel wide are possible (shows in the Resource list).";
//_toolTip += "\r\nWhen Off, Fill and Empty Crew vessel wide will not appear in the resource list.";
_label = SmUtils.SmTags["#smloc_settings_realism_015"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_014"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnablePfCrews = GUILayout.Toggle(SMSettings.EnablePfCrews, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// Enable stock Crew Xfer Override
GUI.enabled = SMSettings.EnableCrew && isEnabled && SMSettings.EnableStockCrewXfer;
GUILayout.BeginHorizontal();
//_label = "Override Stock Crew Xfers";
//_toolTip = "Turns on/off Overriding the stock Crew Transfer mechanism with the SM style.";
//_toolTip += "\r\nWhen ON stock crew transfers will behave like SM style transfers.\n(requires both Stock Crew Transfers & SM Crew Transfers ON)";
//_toolTip += "\r\nWhen Off Stock Crew transfers behave normally if enabled.";
_label = SmUtils.SmTags["#smloc_settings_realism_016"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_015"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Space(20);
SMSettings.OverrideStockCrewXfer = GUILayout.Toggle(SMSettings.OverrideStockCrewXfer, _guiLabel,
GUILayout.Width(300));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// EnableCLS Mode
GUILayout.BeginHorizontal();
GUILayout.Space(20);
if (!SMSettings.EnableCrew || !SMSettings.ClsInstalled)
{
GUI.enabled = false;
}
else
{
GUI.enabled = isEnabled;
}
//_label = "Enable CLS (Connected Living Spaces)";
//_toolTip = "Turns on/off Connected Living space support.";
//_toolTip += "\r\nWhen ON, Crew can only be xfered to a part in the same 'Living Space'.";
//_toolTip += "\r\nWhen Off, Crew transfers are possible to any part that can hold a kerbal.";
_label = SmUtils.SmTags["#smloc_settings_realism_017"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_016"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableCls = GUILayout.Toggle(SMSettings.EnableCls, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (SMSettings.EnableCls != SMSettings.PrevEnableCls && HighLogic.LoadedSceneIsFlight)
{
if (!SMSettings.EnableCls)
{
SMHighlighter.HighlightClsVessel(false, true);
}
else if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()))
{
// Update spaces and reassign the resource to observe new settings.
SMAddon.UpdateClsSpaces();
SMAddon.SmVessel.SelectedResources.Clear();
SMAddon.SmVessel.SelectedResources.Add(SMConditions.ResourceType.Crew.ToString());
}
}
// Enable stock Crew Xfer Override
if (!SMSettings.EnableCrew || !SMSettings.ClsInstalled)
{
GUI.enabled = false;
}
else
{
GUI.enabled = isEnabled;
}
GUILayout.BeginHorizontal();
//_label = "Enable CLS' Allow Unrestricted Crew Xfers switch";
//_toolTip = "Turns on/off Enabling the CLS Switch allowing unrestricted crew transfers.";
//_toolTip += "\r\nWhen ON (requires Realism Mode On), SM Manages Stock and CLS aware Crew Transfers.";
//_toolTip += "\r\nWhen Off (or Realism is off), the setting in CLS is not touched.";
_label = SmUtils.SmTags["#smloc_settings_realism_018"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_017"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Space(20);
SMSettings.EnableClsAllowTransfer = GUILayout.Toggle(SMSettings.EnableClsAllowTransfer, _guiLabel,
GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// EnableScience Mode
GUILayout.BeginHorizontal();
GUI.enabled = isEnabled;
//_label = "Enable Science Xfers";
//_toolTip = "Turns on/off Science Xfers.";
//_toolTip += "\r\nWhen ON, Science transfers are possible and show up in the Resource list.";
//_toolTip += "\r\nWhen Off, Science transfers will not appear in the resource list.";
_label = SmUtils.SmTags["#smloc_settings_realism_019"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_018"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableScience = GUILayout.Toggle(SMSettings.EnableScience, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (!SMSettings.EnableScience && HighLogic.LoadedSceneIsFlight)
{
// Clear Resource selection.
if (SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Science.ToString()))
{
SMAddon.SmVessel.SelectedResources.Clear();
}
}
// EnableResources Mode
GUILayout.BeginHorizontal();
GUI.enabled = isEnabled;
//_label = "Enable Resource Xfers";
//_toolTip = "Turns on/off Resource Xfers.";
//_toolTip += "\r\nWhen ON, Resource transfers are possible and display in Manifest Window.";
//_toolTip += "\r\nWhen Off, Resources will not appear in the resource list.";
_label = SmUtils.SmTags["#smloc_settings_realism_020"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_019"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableResources = GUILayout.Toggle(SMSettings.EnableResources, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (!SMSettings.EnableResources && HighLogic.LoadedSceneIsFlight)
{
// Clear Resource selection.
if (SMAddon.SmVessel.SelectedResources.Count > 0 &&
!SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Crew.ToString()) &&
!SMAddon.SmVessel.SelectedResources.Contains(SMConditions.ResourceType.Science.ToString()))
{
SMAddon.SmVessel.SelectedResources.Clear();
}
}
// Set Gui.enabled for child settings to resources...
GUI.enabled = SMSettings.EnableResources && isEnabled;
// EnablePFResources Mode
GUILayout.BeginHorizontal();
GUILayout.Space(20);
//_label = "Enable Resources in Pre-Flight";
//_toolTip = "Turns on/off Fill and Empty Resources when in preflight.";
//_toolTip += "\r\nWhen ON, Fill & Dump resources vessel wide are possible (shows in the Resource list).";
//_toolTip += "\r\nWhen Off, Fill and Dump Resources vessel wide will not appear in the resource list.";
_label = SmUtils.SmTags["#smloc_settings_realism_021"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_020"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnablePfResources = GUILayout.Toggle(SMSettings.EnablePfResources, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// EnableXferCost Mode
GUILayout.BeginHorizontal();
GUILayout.Space(20);
//_label = "Resource Xfers Consume Power";
//_toolTip = "Turns on/off ElectricCharge cost forResource Xfers.";
//_toolTip += "\r\nWhen ON, Resource transfers will consume ElectricCharge.";
//_toolTip += "\r\nWhen Off, Resources Xfers consume no ElectricCharge.";
_label = SmUtils.SmTags["#smloc_settings_realism_022"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_021"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.EnableXferCost = GUILayout.Toggle(SMSettings.EnableXferCost, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// Resource Xfer EC cost
GUI.enabled = !SMSettings.LockSettings && SMSettings.EnableResources && SMSettings.EnableXferCost;
GUILayout.BeginHorizontal();
GUILayout.Space(35);
//_label = "Xfer Power Cost:";
//_toolTip = "Sets the Electrical cost of resource Xfers.";
//_toolTip += "\r\nThe higher the number the more ElectricCharge used.";
_label = $"{SmUtils.SmTags["#smloc_settings_realism_023"]}:";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_022"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(125), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
// Lets parse the string to allow decimal points.
StrFlowCost = SMSettings.FlowCost.ToString(CultureInfo.InvariantCulture);
// add the decimal point if it was typed.
StrFlowCost = SmUtils.GetStringDecimal(StrFlowCost);
// add the zero if it was typed.
StrFlowCost = SmUtils.GetStringZero(StrFlowCost);
StrFlowCost = GUILayout.TextField(StrFlowCost, 20, GUILayout.Height(20), GUILayout.Width(80));
//_label = "EC/Unit";
//_toolTip = "Sets the Electrical cost of resource Xfers when Realism Mode is on.";
//_toolTip += "\r\nThe higher the number the more ElectricCharge used.";
_label = SmUtils.SmTags["#smloc_settings_realism_024"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_022"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// update decimal bool
SmUtils.SetStringDecimal(StrFlowCost);
//update zero bool
SmUtils.SetStringZero(StrFlowCost);
if (float.TryParse(StrFlowCost, out float newCost))
{
SMSettings.FlowCost = newCost;
}
// create xfer Flow Rate slider;
// Lets parse the string to allow decimal points.
string strFlowRate = SMSettings.FlowRate.ToString(CultureInfo.InvariantCulture);
string strMinFlowRate = SMSettings.MinFlowRate.ToString(CultureInfo.InvariantCulture);
string strMaxFlowRate = SMSettings.MaxFlowRate.ToString(CultureInfo.InvariantCulture);
string strMaxFlowTime = SMSettings.MaxFlowTimeSec.ToString();
// Resource Flow Rate
GUI.enabled = !SMSettings.LockSettings && SMSettings.EnableResources && SMSettings.RealXfers;
GUILayout.BeginHorizontal();
GUILayout.Space(25);
//_label = "Resource Flow Rate:";
//_toolTip = "Sets the rate that resources Xfer when Realistic Transfers is on.";
//_toolTip += "\r\nThe higher the number the faster resources move.";
//_toolTip += "\r\nYou can also use the slider below to change this value.";
_label = $"{SmUtils.SmTags["#smloc_settings_realism_025"]}:";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_023"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(135), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
strFlowRate = GUILayout.TextField(strFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
//_label = "Units/Sec";
//_toolTip = "Sets the rate that resources Xfer when Realism Mode is on.";
//_toolTip += "\r\nThe higher the number the faster resources move.";
//_toolTip += "\r\nYou can also use the slider below to change this value.";
_label = SmUtils.SmTags["#smloc_settings_realism_026"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_023"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (float.TryParse(strFlowRate, out float newRate))
{
SMSettings.FlowRate = (int)newRate;
}
// Resource Flow rate Slider
GUILayout.BeginHorizontal();
GUILayout.Space(30);
GUILayout.Label(SMSettings.MinFlowRate.ToString(CultureInfo.InvariantCulture), GUILayout.Width(10),
GUILayout.Height(20));
SMSettings.FlowRate = GUILayout.HorizontalSlider((float)SMSettings.FlowRate, (float)SMSettings.MinFlowRate,
(float)SMSettings.MaxFlowRate, GUILayout.Width(240), GUILayout.Height(20));
_label = SMSettings.MaxFlowRate.ToString(CultureInfo.InvariantCulture);
//_toolTip = "Slide control to change the Resource Flow Rate shown above.";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_024"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(40), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
// Min Flow Rate for Slider
GUILayout.BeginHorizontal();
GUILayout.Space(30);
//_label = " - Min Flow Rate:";
//_toolTip = "Sets the lower limit (left side) of the Flow rate Slider range.";
_label = $" - {SmUtils.SmTags["#smloc_settings_realism_027"]}:";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_025"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
strMinFlowRate = GUILayout.TextField(strMinFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
//_label = "Units/Sec";
//_toolTip = "Sets the lower limit (left side) of the Flow rate Slider range.";
_label = SmUtils.SmTags["#smloc_settings_realism_026"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_025"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (float.TryParse(strMinFlowRate, out newRate))
{
SMSettings.MinFlowRate = (int)newRate;
}
// Max Flow Rate for Slider
GUILayout.BeginHorizontal();
GUILayout.Space(30);
//_label = " - Max Flow Rate:";
//_toolTip = "Sets the upper limit (right side) of the Flow rate Slider range.";
_label = $" - {SmUtils.SmTags["#smloc_settings_realism_028"]}:";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_026"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
strMaxFlowRate = GUILayout.TextField(strMaxFlowRate, 20, GUILayout.Height(20), GUILayout.Width(80));
//_label = "Units/Sec";
//_toolTip = "Sets the upper limit (right side) of the Flow rate Slider range.";
_label = SmUtils.SmTags["#smloc_settings_realism_026"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_026"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (float.TryParse(strMaxFlowRate, out newRate))
{
SMSettings.MaxFlowRate = (int)newRate;
}
// Max Flow Time
GUILayout.BeginHorizontal();
GUILayout.Space(30);
//_label = " - Max Flow Time:";
//_toolTip = "Sets the maximum duration (in sec) of a resource transfer.";
//_toolTip += "\r\nWorks in conjunction with the Flow rate. if time it would take";
//_toolTip += "\r\n to move a resource exceeds this number, this number will be used";
//_toolTip += "\r\n to calculate an adjusted flow rate.";
//_toolTip += "\r\n(protects you from long Xfers)";
_label = $" - {SmUtils.SmTags["#smloc_settings_realism_029"]}:";
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_027"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(130), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
strMaxFlowTime = GUILayout.TextField(strMaxFlowTime, 20, GUILayout.Height(20), GUILayout.Width(80));
//_label = "Sec";
//_toolTip = "Sets the maximum duration (in sec) of a resource transfer.";
//_toolTip += "\r\nWorks in conjunction with the Flow rate. if time it would take";
//_toolTip += "\r\n to move a resource exceeds this number, this number will be used";
//_toolTip += "\r\n to calculate an adjusted flow rate.";
//_toolTip += "\r\n(protects you from long Xfers)";
_label = SmUtils.SmTags["#smloc_settings_realism_030"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_027"];
_guiLabel = new GUIContent(_label, _toolTip);
GUILayout.Label(_guiLabel, GUILayout.Width(80), GUILayout.Height(20));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUILayout.EndHorizontal();
if (float.TryParse(strMaxFlowTime, out newRate))
{
SMSettings.MaxFlowTimeSec = (int)newRate;
}
// reset gui.enabled to default
GUI.enabled = true;
GUILayout.Label("____________________________________________________________________________________________",
SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));
// LockSettings Mode
GUI.enabled = isEnabled;
//_label = "Lock Realism Settings (If set ON, disable in config file)";
//_toolTip = "Locks the settings in this section so they cannot be altered in game.";
//_toolTip += "\r\nTo turn off Locking you MUST edit the SMSettings.dat file.";
_label = SmUtils.SmTags["#smloc_settings_realism_031"];
_toolTip = SmUtils.SmTags["#smloc_settings_realism_tt_028"];
_guiLabel = new GUIContent(_label, _toolTip);
SMSettings.LockSettings = GUILayout.Toggle(SMSettings.LockSettings, _guiLabel, GUILayout.Width(guiToggleWidth));
_rect = GUILayoutUtility.GetLastRect();
if (Event.current.type == EventType.Repaint && _canShowToolTips)
{
ToolTip = SMToolTips.SetActiveToolTip(_rect, GUI.tooltip, ref ToolTipActive, scrollX);
}
GUI.enabled = true;
GUILayout.Label("____________________________________________________________________________________________",
SMStyle.LabelStyleHardRule, GUILayout.Height(10), GUILayout.Width(guiRuleWidth));
}