void Start()
{
var skeletonComponent = GetComponent <ISkeletonComponent>();
if (skeletonComponent == null)
{
return;
}
var skeleton = skeletonComponent.Skeleton;
if (skeleton == null)
{
return;
}
combinedSkin = combinedSkin ?? new Skin("combined");
combinedSkin.Clear();
foreach (var skinName in skinsToCombine)
{
var skin = skeleton.Data.FindSkin(skinName);
if (skin != null)
{
combinedSkin.AddAttachments(skin);
}
}
skeleton.SetSkin(combinedSkin);
skeleton.SetToSetupPose();
var animationStateComponent = skeletonComponent as IAnimationStateComponent;
if (animationStateComponent != null)
{
animationStateComponent.AnimationState.Apply(skeleton);
}
}
// Start is called before the first frame update
private void Awake()
{
instance = this;
skeleton = skeletonAnimation.Skeleton; // 스켈레톤 클래스
baseSkin = skeleton.Data.FindSkin("base"); // 기존에 있는 스킨 가져오기
baseSkin.AddAttachments(skeleton.Data.FindSkin("weapon/weapon001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("body/body001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("face/face001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("cape/cape001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("hand/hand001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("hat/hat001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("hip/hip001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
baseSkin.AddAttachments(skeleton.Data.FindSkin("shoes/shoes001")); // 기존에 있는 스킨에 정의된 값을 새로운 스킨에 추가
skeleton.SetSkin(baseSkin);
skeleton.SetSlotsToSetupPose();
}
void Apply()
{
var skeletonGraphic = GetComponent <SkeletonGraphic>();
var skeleton = skeletonGraphic.Skeleton;
// STEP 0: PREPARE SKINS
// Let's prepare a new skin to be our custom skin with equips/customizations. We get a clone so our original skins are unaffected.
customSkin = customSkin ?? new Skin("custom skin"); // This requires that all customizations are done with skin placeholders defined in Spine.
//customSkin = customSkin ?? skeleton.UnshareSkin(true, false, skeletonAnimation.AnimationState); // use this if you are not customizing on the default skin and don't plan to remove
// Next let's get the skin that contains our source attachments. These are the attachments that
var baseSkin = skeleton.Data.FindSkin(baseSkinName);
// STEP 1: "EQUIP" ITEMS USING SPRITES
// STEP 1.1 Find the original attachment.
// Step 1.2 Get a clone of the original attachment.
// Step 1.3 Apply the Sprite image to it.
// Step 1.4 Add the remapped clone to the new custom skin.
// Let's do this for the visor.
int visorSlotIndex = skeleton.FindSlotIndex(visorSlot); // You can access GetAttachment and SetAttachment via string, but caching the slotIndex is faster.
Attachment baseAttachment = baseSkin.GetAttachment(visorSlotIndex, visorKey); // STEP 1.1
Attachment newAttachment = baseAttachment.GetRemappedClone(visorSprite, sourceMaterial); // STEP 1.2 - 1.3
customSkin.SetAttachment(visorSlotIndex, visorKey, newAttachment); // STEP 1.4
// And now for the gun.
int gunSlotIndex = skeleton.FindSlotIndex(gunSlot);
Attachment baseGun = baseSkin.GetAttachment(gunSlotIndex, gunKey); // STEP 1.1
Attachment newGun = baseGun.GetRemappedClone(gunSprite, sourceMaterial); // STEP 1.2 - 1.3
if (newGun != null)
{
customSkin.SetAttachment(gunSlotIndex, gunKey, newGun); // STEP 1.4
}
// customSkin.RemoveAttachment(gunSlotIndex, gunKey); // To remove an item.
// customSkin.Clear()
// Use skin.Clear() To remove all customizations.
// Customizations will fall back to the value in the default skin if it was defined there.
// To prevent fallback from happening, make sure the key is not defined in the default skin.
// STEP 3: APPLY AND CLEAN UP.
// Recommended: REPACK THE CUSTOM SKIN TO MINIMIZE DRAW CALLS
// Repacking requires that you set all source textures/sprites/atlases to be Read/Write enabled in the inspector.
// Combine all the attachment sources into one skin. Usually this means the default skin and the custom skin.
// call Skin.GetRepackedSkin to get a cloned skin with cloned attachments that all use one texture.
if (repack)
{
var repackedSkin = new Skin("repacked skin");
repackedSkin.AddAttachments(skeleton.Data.DefaultSkin);
repackedSkin.AddAttachments(customSkin);
repackedSkin = repackedSkin.GetRepackedSkin("repacked skin", sourceMaterial, out runtimeMaterial, out runtimeAtlas);
skeleton.SetSkin(repackedSkin);
}
else
{
skeleton.SetSkin(customSkin);
}
//skeleton.SetSlotsToSetupPose();
skeleton.SetToSetupPose();
skeletonGraphic.Update(0);
skeletonGraphic.OverrideTexture = runtimeAtlas;
Resources.UnloadUnusedAssets();
}
void Apply()
{
var skeletonAnimation = GetComponent <SkeletonAnimation>();
var skeleton = skeletonAnimation.Skeleton;
// STEP 0: PREPARE SKINS
// Let's prepare a new skin to be our custom skin with equips/customizations.
//We get a clone so our original skins are unaffected.
customSkin = customSkin ?? new Skin("custom skin");
// This requires that all customizations are done with skin placeholders defined in Spine.
//customSkin = customSkin ?? skeleton.UnshareSkin(true, false, skeletonAnimation.AnimationState); // use this if you are not customizing on the default skin.
var templateSkin = skeleton.Data.FindSkin(templateAttachmentsSkin);
// STEP 1: "EQUIP" ITEMS USING SPRITES
// STEP 1.1 Find the original/template attachment.
// Step 1.2 Get a clone of the original/template attachment.
// Step 1.3 Apply the Sprite image to the clone.
// Step 1.4 Add the remapped clone to the new custom skin.
for (int i = 0; i < AllReplacePairs.Count; i++)
{
SlotRegionPair Pair = AllReplacePairs[i];
int slotIndex = skeleton.FindSlotIndex(Pair.Slot);
// You can access GetAttachment and SetAttachment via string
//, but caching the slotIndex is faster.
Attachment templateAttachment = templateSkin.GetAttachment(slotIndex, Pair.Key); // STEP 1.1
Attachment newAttachment = templateAttachment.GetRemappedClone
(Pair.newSprite, sourceMaterial); // STEP 1.2 - 1.3
if (newAttachment != null)
{
RegionAttachment ra = newAttachment as RegionAttachment;
ra = (RegionAttachment)ra.Copy();
float scale = 1f / Pair.newSprite.pixelsPerUnit;
ra.Width = ra.RegionWidth * scale;
ra.Height = ra.RegionHeight * scale;
customSkin.SetAttachment(slotIndex, Pair.Key, newAttachment);//STEP 1.4
}
}
if (repack)
{
var repackedSkin = new Skin("repacked skin");
repackedSkin.AddAttachments(skeleton.Data.DefaultSkin); // Include the "default" skin. (everything outside of skin placeholders)
repackedSkin.AddAttachments(customSkin); // Include your new custom skin.
repackedSkin = repackedSkin.GetRepackedSkin("repacked skin", sourceMaterial, out runtimeMaterial, out runtimeAtlas); // Pack all the items in the skin.
skeleton.SetSkin(repackedSkin); // Assign the repacked skin to your Skeleton.
if (bbFollower != null)
{
bbFollower.Initialize(true);
}
}
else
{
skeleton.SetSkin(customSkin); // Just use the custom skin directly.
}
skeleton.SetSlotsToSetupPose(); // Use the pose from setup pose.
skeletonAnimation.Update(0); // Use the pose in the currently active animation.
Resources.UnloadUnusedAssets();
}
void Apply()
{
var skeletonAnimation = GetComponent <SkeletonAnimation>();
var skeleton = skeletonAnimation.Skeleton;
// STEP 0: PREPARE SKINS
// Let's prepare a new skin to be our custom skin with equips/customizations. We get a clone so our original skins are unaffected.
customSkin = customSkin ?? new Skin("custom skin"); // This requires that all customizations are done with skin placeholders defined in Spine.
//customSkin = customSkin ?? skeleton.UnshareSkin(true, false, skeletonAnimation.AnimationState); // use this if you are not customizing on the default skin.
var templateSkin = skeleton.Data.FindSkin(templateAttachmentsSkin);
// STEP 1: "EQUIP" ITEMS USING SPRITES
// STEP 1.1 Find the original/template attachment.
// Step 1.2 Get a clone of the original/template attachment.
// Step 1.3 Apply the Sprite image to the clone.
// Step 1.4 Add the remapped clone to the new custom skin.
// Let's do this for the visor.
int visorSlotIndex = skeleton.FindSlotIndex(visorSlot); // You can access GetAttachment and SetAttachment via string, but caching the slotIndex is faster.
Attachment templateAttachment = templateSkin.GetAttachment(visorSlotIndex, visorKey); // STEP 1.1
Attachment newAttachment = templateAttachment.GetRemappedClone(visorSprite, sourceMaterial); // STEP 1.2 - 1.3
customSkin.SetAttachment(visorSlotIndex, visorKey, newAttachment); // STEP 1.4
// And now for the gun.
int gunSlotIndex = skeleton.FindSlotIndex(gunSlot);
Attachment templateGun = templateSkin.GetAttachment(gunSlotIndex, gunKey); // STEP 1.1
Attachment newGun = templateGun.GetRemappedClone(gunSprite, sourceMaterial); // STEP 1.2 - 1.3
if (newGun != null)
{
customSkin.SetAttachment(gunSlotIndex, gunKey, newGun); // STEP 1.4
}
// customSkin.RemoveAttachment(gunSlotIndex, gunKey); // To remove an item.
// customSkin.Clear()
// Use skin.Clear() To remove all customizations.
// Customizations will fall back to the value in the default skin if it was defined there.
// To prevent fallback from happening, make sure the key is not defined in the default skin.
// STEP 3: APPLY AND CLEAN UP.
// Recommended, preferably at level-load-time: REPACK THE CUSTOM SKIN TO MINIMIZE DRAW CALLS
// IMPORTANT NOTE: the GetRepackedSkin() operation is expensive - if multiple characters
// need to call it every few seconds the overhead will outweigh the draw call benefits.
//
// Repacking requires that you set all source textures/sprites/atlases to be Read/Write enabled in the inspector.
// Combine all the attachment sources into one skin. Usually this means the default skin and the custom skin.
// call Skin.GetRepackedSkin to get a cloned skin with cloned attachments that all use one texture.
if (repack)
{
var repackedSkin = new Skin("repacked skin");
repackedSkin.AddAttachments(skeleton.Data.DefaultSkin); // Include the "default" skin. (everything outside of skin placeholders)
repackedSkin.AddAttachments(customSkin); // Include your new custom skin.
repackedSkin = repackedSkin.GetRepackedSkin("repacked skin", sourceMaterial, out runtimeMaterial, out runtimeAtlas); // Pack all the items in the skin.
skeleton.SetSkin(repackedSkin); // Assign the repacked skin to your Skeleton.
if (bbFollower != null)
{
bbFollower.Initialize(true);
}
}
else
{
skeleton.SetSkin(customSkin); // Just use the custom skin directly.
}
skeleton.SetSlotsToSetupPose(); // Use the pose from setup pose.
skeletonAnimation.Update(0); // Use the pose in the currently active animation.
Resources.UnloadUnusedAssets();
}
void Apply()
{
var skeletonGraphic = GetComponent <SkeletonGraphic>();
var skeleton = skeletonGraphic.Skeleton;
// STEP 0: PREPARE SKINS
// Let's prepare a new skin to be our custom skin with equips/customizations. We get a clone so our original skins are unaffected.
customSkin = customSkin ?? new Skin("custom skin"); // This requires that all customizations are done with skin placeholders defined in Spine.
//customSkin = customSkin ?? skeleton.UnshareSkin(true, false, skeletonAnimation.AnimationState); // use this if you are not customizing on the default skin and don't plan to remove
// Next let's get the skin that contains our source attachments. These are the attachments that
var baseSkin = skeleton.Data.FindSkin(baseSkinName);
// STEP 1: "EQUIP" ITEMS USING SPRITES
// STEP 1.1 Find the original attachment.
// Step 1.2 Get a clone of the original attachment.
// Step 1.3 Apply the Sprite image to it.
// Step 1.4 Add the remapped clone to the new custom skin.
// Let's do this for the visor.
int visorSlotIndex = skeleton.FindSlotIndex(visorSlot); // You can access GetAttachment and SetAttachment via string, but caching the slotIndex is faster.
Attachment baseAttachment = baseSkin.GetAttachment(visorSlotIndex, visorKey); // STEP 1.1
Attachment newAttachment = baseAttachment.GetRemappedClone(visorSprite, sourceMaterial); // STEP 1.2 - 1.3
// Note: Each call to `GetRemappedClone()` with parameter `premultiplyAlpha` set to `true` creates
// a cached Texture copy which can be cleared by calling AtlasUtilities.ClearCache() as done below.
customSkin.SetAttachment(visorSlotIndex, visorKey, newAttachment); // STEP 1.4
// And now for the gun.
int gunSlotIndex = skeleton.FindSlotIndex(gunSlot);
Attachment baseGun = baseSkin.GetAttachment(gunSlotIndex, gunKey); // STEP 1.1
Attachment newGun = baseGun.GetRemappedClone(gunSprite, sourceMaterial); // STEP 1.2 - 1.3
if (newGun != null)
{
customSkin.SetAttachment(gunSlotIndex, gunKey, newGun); // STEP 1.4
}
// customSkin.RemoveAttachment(gunSlotIndex, gunKey); // To remove an item.
// customSkin.Clear()
// Use skin.Clear() To remove all customizations.
// Customizations will fall back to the value in the default skin if it was defined there.
// To prevent fallback from happening, make sure the key is not defined in the default skin.
// STEP 3: APPLY AND CLEAN UP.
// Recommended: REPACK THE CUSTOM SKIN TO MINIMIZE DRAW CALLS
// Repacking requires that you set all source textures/sprites/atlases to be Read/Write enabled in the inspector.
// Combine all the attachment sources into one skin. Usually this means the default skin and the custom skin.
// call Skin.GetRepackedSkin to get a cloned skin with cloned attachments that all use one texture.
if (repack)
{
var repackedSkin = new Skin("repacked skin");
repackedSkin.AddAttachments(skeleton.Data.DefaultSkin);
repackedSkin.AddAttachments(customSkin);
// Note: materials and textures returned by GetRepackedSkin() behave like 'new Texture2D()' and need to be destroyed
if (runtimeMaterial)
{
Destroy(runtimeMaterial);
}
if (runtimeAtlas)
{
Destroy(runtimeAtlas);
}
repackedSkin = repackedSkin.GetRepackedSkin("repacked skin", sourceMaterial, out runtimeMaterial, out runtimeAtlas);
skeleton.SetSkin(repackedSkin);
}
else
{
skeleton.SetSkin(customSkin);
}
//skeleton.SetSlotsToSetupPose();
skeleton.SetToSetupPose();
skeletonGraphic.Update(0);
skeletonGraphic.OverrideTexture = runtimeAtlas;
// `GetRepackedSkin()` and each call to `GetRemappedClone()` with parameter `premultiplyAlpha` set to `true`
// cache necessarily created Texture copies which can be cleared by calling AtlasUtilities.ClearCache().
// You can optionally clear the textures cache after multiple repack operations.
// Just be aware that while this cleanup frees up memory, it is also a costly operation
// and will likely cause a spike in the framerate.
AtlasUtilities.ClearCache();
Resources.UnloadUnusedAssets();
}
public void ChracterEquipSetting(bool isStart, int equipIndex, int equipNumber)
{
switch (equipIndex)
{
case 0:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("weapon/weapon{0}", string.Format("{0:D3}", equipNumber))));
characterWEaponEffect.ChangeWeaponEffect(equipNumber - 1);
break;
case 1:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("hat/hat{0}", string.Format("{0:D3}", equipNumber))));
if (equipNumber != 24 &&
equipNumber != 19 &&
equipNumber != 25)
{
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("hatback"), "hatback");
}
break;
case 2:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("body/body{0}", string.Format("{0:D3}", equipNumber))));
break;
case 3:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("hand/hand{0}", string.Format("{0:D3}", equipNumber))));
break;
case 4:
//Slot slot = skeletonAnimation.Skeleton.FindSlot("hip");
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("hip"), "hip");
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("hip_front1"), "hip_front1");
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("hip_front2"), "hip_front2");
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("hip_front3"), "hip_front3");
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("hip/hip{0}", string.Format("{0:D3}", equipNumber))));
//skeletonAnimation.Skeleton.SetAttachment(slot.ToString(), string.Format("skin/skin{0}/hip_front3", string.Format("{0:D3}", equipNumber + 1)));
//baseSkin.SetAttachment(0, string.Format("hip/hip{0}", string.Format("{0:D3}", equipNumber + 1)), baseSkin.GetAttachment(0, "hip"));
break;
case 5:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("shoes/shoes{0}", string.Format("{0:D3}", equipNumber))));
break;
case 6:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("cape/cape{0}", string.Format("{0:D3}", equipNumber))));
if (equipNumber != 21)
{
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("wing1"), "wing1");
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("wing2"), "wing2");
}
else
{
baseSkin.RemoveAttachment(skeletonAnimation.Skeleton.FindSlotIndex("cape_back"), "cape_back");
}
break;
case 7:
baseSkin.AddAttachments(skeleton.Data.FindSkin(string.Format("face/face{0}", string.Format("{0:D3}", equipNumber))));
break;
default:
break;
}
skeleton.SetSkin(baseSkin);
skeleton.SetSlotsToSetupPose();
skeletonAnimation.AnimationState.Apply(skeleton);
//나중에 여기서 저장.
}