public void Loop()
{
NextState = CurrentState;
UpdateStatus(CurrentState.ToString());
switch (CurrentState)
{
case TestState.WaitForDevice:
Dev.SetLed(false, false);
if (IsStable(s => s.Sense))
{
// Sensed a device.
NextState = TestState.SoftOn;
Dev.SetMode(SignTest.DeviceMode.SoftOn);
}
break;
case TestState.WaitDeviceLeave:
if (IsStable(s => s.DeviceGone))
{
NextState = TestState.WaitForDevice;
Dev.SetMode(SignTest.DeviceMode.Off); // Ensure that it's off.
}
if (Dev.GetButton())
{
// If button is pressed, rerun the process for the currently attached device.
WriteText("Button pressed, restarting process");
NextState = TestState.WaitForDevice;
}
break;
case TestState.SoftOn:
if (IsStable(s => s.SoftOnOk))
{
NextState = TestState.PowerOn;
Dev.SetMode(SignTest.DeviceMode.On);
}
break;
case TestState.PowerOn:
if (IsStable(s => s.PowerOk))
{
// Higher power standards have been met.
NextState = TestState.CheckFlash;
}
break;
case TestState.CheckFlash:
// Sanity test flash
Dev.SetMode(SignTest.DeviceMode.FlashSpi);
UInt32 flashId = Dev.FlashReadId();
WriteText("Flash ID: {0:x8}", flashId);
byte[] checkData = Dev.FlashRead(0, 128);
CheckReloadBitstream();
// Confirm whether flash contains the latest program
if (FpgaProgram == null)
{
WriteText("Skipping flash contents check.");
NextState = TestState.BootFpga;
break;
}
if (!CompareBytes(checkData, 0, FpgaProgram, 0, checkData.Length))
{
WriteText("Quick check shows we need to reprogram the FPGA.");
HexDump(0, checkData);
NextState = TestState.ProgramFpga;
break;
}
else
{
WriteText("Checking full FPGA program...");
}
checkData = Dev.FlashRead(0, FpgaProgram.Length);
if (!CompareBytes(checkData, 0, FpgaProgram, 0, checkData.Length))
{
WriteText("Full check shows we need to reprogram the FPGA.");
NextState = TestState.ProgramFpga;
break;
}
WriteText("Fpga program is correct.");
NextState = TestState.BootFpga;
break;
case TestState.ProgramFpga:
WriteText("Erasing flash sectors...");
Dev.FlashEraseRegion(0, FpgaProgram.Length);
WriteText("Programming flash...");
Dev.FlashWrite(0, FpgaProgram);
NextState = TestState.BootFpga;
break;
case TestState.BootFpga:
NextState = TestState.WaitDeviceLeave;
try
{
Dev.SetMode(SignTest.DeviceMode.FpgaActive);
Dev.SetLed(true, false);
WriteText("Fpga Booted!");
NextState = TestState.TestFpga;
}
catch (Exception ex)
{
WriteText("Fpga Failed to boot.");
Dev.SetLed(false, true);
WriteText(ex.ToString());
}
break;
case TestState.TestFpga:
Thread.Sleep(5000);
WriteText("Collecting some debug data from the FPGA");
int buffercount = 32;
byte[] usbdata = new byte[64 * buffercount];
for (int i = 0; i < buffercount; i++)
{
byte[] data = Dev.FpgaSpi(new byte[64]);
Array.Copy(data, 0, usbdata, i * 64, 64);
}
HexOnly(usbdata);
DecodeUsbTrace(usbdata);
WriteText("Sending a test image.");
{
uint[] image = new uint[32 * 32];
for (int y = 0; y < 32; y++)
{
for (int x = 0; x < 32; x++)
{
double angle = Math.Atan2(x - 16, 16 - y) / (2 * Math.PI);
double rad = Math.Sqrt((y - 16) * (y - 16) + (x - 16) * (x - 16));
if (angle < 0)
{
angle += 1;
}
int a = (int)Math.Round(angle * 127);
int r = (int)Math.Round(160 - rad * 8);
int z = (x + y * 32) * 191 / (32 * 32);
if (a < 0)
{
a = 0;
}
if (a > 255)
{
a = 255;
}
if (r < 0)
{
r = 0;
}
if (r > 255)
{
r = 255;
}
image[x + y * 32] = (uint)(a + r * 0x100 + z * 0x10000);
}
}
Dev.SendImage32x32(0, image);
}
NextState = TestState.WaitDeviceLeave;
break;
}
// Did the device disappear?
if (CurrentState != TestState.WaitForDevice)
{
if (IsStable(s => s.DeviceGone, StableCount * 2))
{
WriteText("Unexpected device loss.");
NextState = TestState.WaitForDevice;
Dev.SetMode(SignTest.DeviceMode.Off); // Ensure that it's off.
}
}
if (NextState != CurrentState)
{
WriteText("State change from {0} => {1}", CurrentState, NextState);
CurrentState = NextState;
}
}
