checkForEntityatPoint(Point3d pnt3d, ObjectId idObj, Type type)
{
bool match = false;
TypedValue[] TVs = new TypedValue[1];
TVs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(type).DxfName), 0);
SelectionFilter FILTER = new SelectionFilter(TVs);
PromptSelectionResult PSR = BaseObjs._editor.SelectCrossingWindow(pnt3d, pnt3d, FILTER);
if (PSR.Status == PromptStatus.OK)
{
ObjectId[] ids = PSR.Value.GetObjectIds();
foreach (ObjectId id in ids)
{
if (id == idObj)
{
match = true;
break;
}
}
}
return(match);
}
public static ObjectIdCollection GetAll3DFaceEntities()
{
Document mdiActiveDocument = Application.DocumentManager.MdiActiveDocument;
Editor editor = mdiActiveDocument.Editor;
TypedValue[] array = new TypedValue[1];
TypedValue[] array2 = array;
int num = 0;
TypedValue typedValue;
typedValue..ctor(0, "3DFACE");
array2[num] = typedValue;
TypedValue[] array3 = array;
SelectionFilter selectionFilter = new SelectionFilter(array3);
PromptSelectionResult promptSelectionResult = editor.SelectAll(selectionFilter);
ObjectIdCollection result;
if (promptSelectionResult.Status == 5100)
{
result = new ObjectIdCollection(promptSelectionResult.Value.GetObjectIds());
}
else
{
result = new ObjectIdCollection();
}
return(result);
}
public static SelectionSet Aecc_Material(string message)
{
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
Editor ed = acDoc.Editor;
ed.WriteMessage(message);
TypedValue[] acTypValAr = new TypedValue[1];
acTypValAr.SetValue(new TypedValue((int)DxfCode.Start, "AECC_QUANTITY_TAKEOFF_MATERIAL_SECTION"), 0);
// Assign the filter criteria to a SelectionFilter object
SelectionFilter acSelFtr = new SelectionFilter(acTypValAr);
// Request for objects to be selected in the drawing area
PromptSelectionResult acSSPrompt;
acSSPrompt = ed.GetSelection(acSelFtr);
// If the prompt status is OK, objects were selected
if (acSSPrompt.Status == PromptStatus.OK)
{
SelectionSet acSSet = acSSPrompt.Value;
//Application.ShowAlertDialog("Number of objects selected: " + acSSet.Count.ToString());
return(acSSet);
}
else
{
Application.ShowAlertDialog("Number of objects selected: 0");
}
return(null);
}
getEntityatPoint(Point3d pnt3d, string nameLayer = "*")
{
List <ObjectId> ids = null;
TypedValue[] TVs = new TypedValue[6];
TVs.SetValue(new TypedValue((int)DxfCode.Operator, "<OR"), 0);
TVs.SetValue(new TypedValue((int)DxfCode.Start, "LINE"), 1);
TVs.SetValue(new TypedValue((int)DxfCode.Start, "ARC"), 2);
TVs.SetValue(new TypedValue((int)DxfCode.Start, "CIRCLE"), 3);
TVs.SetValue(new TypedValue((int)DxfCode.Start, "POLYLINE"), 4);
TVs.SetValue(new TypedValue((int)DxfCode.Operator, "OR>"), 5);
//TVs.SetValue(new TypedValue((int)DxfCode.LayerName, nameLayer), 6);
SelectionFilter FILTER = new SelectionFilter(TVs);
PromptSelectionResult PSR = BaseObjs._editor.SelectCrossingWindow(pnt3d, pnt3d, FILTER);
if (PSR.Status == PromptStatus.OK)
{
ObjectId[] idss = PSR.Value.GetObjectIds();
foreach (ObjectId id in idss)
{
ids.Add(id);
}
}
return(ids);
}
public void TestBrepUnion()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
var tvs = new TypedValue[] { new TypedValue((int)DxfCode.Start, "LWPOLYLINE") };
var selFilter = new SelectionFilter(tvs);
var sel = ed.GetSelection(selFilter);
if (sel.Status != PromptStatus.OK) return;
using (var t = db.TransactionManager.StartTransaction())
{
var idsPls = sel.Value.GetObjectIds();
List<Polyline> pls = new List<Polyline>();
foreach (var item in idsPls)
{
var pl = item.GetObject(OpenMode.ForRead) as Polyline;
pls.Add(pl);
}
Region union = BrepExtensions.Union(pls, null);
//var cs = db.CurrentSpaceId.GetObject(OpenMode.ForWrite) as BlockTableRecord;
//if (union != null)
//{
// cs.AppendEntity(union);
// t.AddNewlyCreatedDBObject(union, true);
//}
t.Commit();
}
}
public void MidPoint()
{
Document doc = GetDocument();
Database db = doc.Database;
Editor ed = doc.Editor;
try
{
using (Transaction trans = db.TransactionManager.StartTransaction())
{
PromptSelectionOptions pso = new PromptSelectionOptions();
TypedValue[] tv = new TypedValue[] { new TypedValue(0, "POINT") };
SelectionFilter filter = new SelectionFilter(tv);
PromptSelectionResult psr = ed.GetSelection(filter);
if (psr.Status != PromptStatus.OK)
{
return;
}
var res = psr.Value.GetObjectIds();
double x = 0, y = 0;
int n = 0;
foreach (ObjectId objectId in res)
{
var pt = trans.GetObject(objectId, OpenMode.ForRead) as DBPoint;
if (pt != null)
{
n++;
x += pt.Position.X;
y += pt.Position.Y;
}
}
if (n == 0)
{
return;
}
var avgPt = new Point3d(x / n, y / n, 0);
BlockTable bt = trans.GetObject(db.BlockTableId
, OpenMode.ForRead) as BlockTable;
BlockTableRecord btr = trans.GetObject(
bt[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
DBPoint po = new DBPoint(avgPt);
btr.AppendEntity(po);
trans.AddNewlyCreatedDBObject(po, true);
trans.Commit();
}
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
ed.WriteMessage(ex.Message + ex.StackTrace);
}
}
private static ObjectId FetchFFLBlockID()
{
Document acDoc = Autodesk.AutoCAD.ApplicationServices.Core.Application.DocumentManager.MdiActiveDocument;
Database acCurrDb = acDoc.Database;
Editor acEditor = acDoc.Editor;
// Create the selection filter for the FFL block
TypedValue[] selFilterList = new TypedValue[2];
selFilterList[0] = new TypedValue(0, "INSERT");
selFilterList[1] = new TypedValue(2, "JPP_App_Outline*");
SelectionFilter selFilter = new SelectionFilter(selFilterList);
// Set prompt options and message
PromptSelectionOptions selOptions = new PromptSelectionOptions();
selOptions.MessageForAdding = "Select FFL block: ";
selOptions.SinglePickInSpace = true;
selOptions.SingleOnly = true;
// Prompt user to select FFL add exposed brickwork
PromptSelectionResult selResult = acEditor.GetSelection(selOptions, selFilter);
ObjectId[] FFLToEditId = selResult.Value.GetObjectIds();
ObjectId blockId = FFLToEditId[0];
using (Transaction acTrans = acCurrDb.TransactionManager.StartTransaction())
{
try
{
BlockTable acBlkTbl = acTrans.GetObject(acCurrDb.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockReference fflBlock = acTrans.GetObject(blockId, OpenMode.ForRead) as BlockReference;
BlockTableRecord acBlkTblRec = acTrans.GetObject(acBlkTbl[fflBlock.Name],
OpenMode.ForRead) as BlockTableRecord;
if (acBlkTblRec == null)
{
acEditor.WriteMessage("\nError FFL block not found.");
acTrans.Commit();
return(ObjectId.Null);
}
// Check there is only one instance of this block reference in the drawing
if (acBlkTblRec.GetBlockReferenceIds(false, true).Count != 1)
{
acEditor.WriteMessage("\nError more than one instance of the block reference.");
acTrans.Commit();
return(ObjectId.Null);
}
acTrans.Commit();
return(fflBlock.ObjectId);
}
catch (Autodesk.AutoCAD.Runtime.Exception acException)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog
("The following exception was caught: \n" + acException.Message
+ "\nError retrieving FFL Block Id!\n");
acTrans.Abort();
return(ObjectId.Null);
}
}
}
public void List()
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
PromptSelectionOptions Opts = new PromptSelectionOptions();
//Build a filter list so that only block references are selected
TypedValue[] filList = { new TypedValue((int)DxfCode.Start, "INSERT") };
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult res = ed.GetSelection(Opts, filter);
//Do nothing if selection is unsuccessful
if (res.Status != PromptStatus.OK)
{
return;
}
Autodesk.AutoCAD.EditorInput.SelectionSet SS = res.Value;
ObjectId[] idArray = SS.GetObjectIds();
//List the selection set
EmployeeCount(idArray);
}
catch
{
}
}
buildSSetBase(TypedValue[] tvs, bool selectAll = true, string prompt = "")
{
SelectionFilter filter = new SelectionFilter(tvs);
PromptSelectionOptions pso = new PromptSelectionOptions();
pso.MessageForAdding = prompt;
pso.MessageForRemoval = "";
PromptSelectionResult psr = null;
if (selectAll)
{
psr = BaseObjs._editor.SelectAll(filter);
}
else
{
psr = BaseObjs._editor.GetSelection(pso, filter);
}
if (psr.Status == PromptStatus.OK)
{
return(psr.Value);
}
else
{
return(null);
}
}
static public void SelectDynamicBlocks()
{
var doc = Active.Document;
var ed = doc.Editor;
var pso = new PromptStringOptions("\nName of dynamic block to search for");
pso.AllowSpaces = true;
var pr = ed.GetString(pso);
if (pr.Status != PromptStatus.OK)
{
return;
}
string blkName = pr.StringResult;
List <string> blkNames = new List <string>();
blkNames.Add(blkName);
var tr = doc.TransactionManager.StartTransaction();
try
{
using (tr)
{
var bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead);
// Start by getting access to our block, if it exists
if (!bt.Has(blkName))
{
ed.WriteMessage("\nCannot find block called \"{0}\".", blkName);
return;
}
// Get the anonymous block names
var btr = (BlockTableRecord)tr.GetObject(bt[blkName], OpenMode.ForRead);
if (!btr.IsDynamicBlock)
{
ed.WriteMessage("\nCannot find a dynamic block called \"{0}\".", blkName);
return;
}
// Get the anonymous blocks and add them to our list
var anonBlks = btr.GetAnonymousBlockIds();
foreach (ObjectId bid in anonBlks)
{
var btr2 = (BlockTableRecord)tr.GetObject(bid, OpenMode.ForRead);
blkNames.Add(btr2.Name);
}
tr.Commit();
}
// Build a conditional filter list so that only
// entities with the specified properties are
// selected
SelectionFilter sf = new SelectionFilter(CreateFilterListForBlocks(blkNames));
PromptSelectionResult psr = ed.SelectAll(sf);
ed.WriteMessage("\nFound {0} entit{1}.", psr.Value.Count, (psr.Value.Count == 1 ? "y" : "ies"));
}
catch (Autodesk.AutoCAD.Runtime.Exception e)
{
Console.WriteLine(e.Message);
throw;
}
}
public ObjectIdCollection GetIdsByTypeTypeValue(params string[] types)
{
// Get the document
var doc = Application.DocumentManager.MdiActiveDocument;
// Get the editor to make the selection
Editor oEd = doc.Editor;
// Add our or operators so we can grab multiple types.
IList <TypedValue> typedValueSelection = new List <TypedValue> {
new TypedValue(Convert.ToInt32(DxfCode.Operator), "<or"),
new TypedValue(Convert.ToInt32(DxfCode.Operator), "or>")
};
// We will need to insert our requested types into the collection.
// Since we knew we would have to insert they types between the operators..
// I used a Enumerable type which gave me that functionality. (IListf<T>)
foreach (var type in types)
{
typedValueSelection.Insert(1, new TypedValue(Convert.ToInt32(DxfCode.Start), type));
}
SelectionFilter selectionFilter = new SelectionFilter(typedValueSelection.ToArray());
// because we have to.. Not really sure why, I assume this is our only access point
// to grab the entities that we want. (I am open to being corrected)
PromptSelectionResult promptSelectionResult = oEd.SelectAll(selectionFilter);
// return our new ObjectIdCollection that is "Hopefully" full of the types that we want.
return(new ObjectIdCollection(promptSelectionResult.Value.GetObjectIds()));
}
/// <summary>选择多个单行或者多行文字 </summary>
/// <param name="docMdf"></param>
/// <returns></returns>
private static ObjectId[] SelectTexts(DocumentModifier docMdf)
{
var ed = docMdf.acEditor;
var filterType = new[]
{
new TypedValue((int)DxfCode.Operator, "<OR"),
new TypedValue((int)DxfCode.Start, "TEXT"),
new TypedValue((int)DxfCode.Start, "MTEXT"),
new TypedValue((int)DxfCode.Operator, "OR>")
};
var filter = new SelectionFilter(filterType);
// Create our options object
var pso = new PromptSelectionOptions();
var kws = pso.Keywords.GetDisplayString(true);
pso.MessageForAdding = $"\n选择单行或者多行文字"; // 当用户在命令行中输入A（或Add）时，命令行出现的提示字符。
pso.MessageForRemoval = pso.MessageForAdding; // 当用户在命令行中输入Re（或Remove）时，命令行出现的提示字符。
var res = ed.GetSelection(pso, filter);
if (res.Status == PromptStatus.OK)
{
return(res.Value.GetObjectIds());
}
return(null);
}
/// <summary> 在界面中选择一行点或者一列点，用来进行表格的单元格划分 </summary>
private Point3d GetPointsFromUI(DocumentModifier docMdf, bool forRow, out bool continueSelect)
{
continueSelect = false;
// 创建一个 TypedValue 数组，用于定义过滤条件
TypedValue[] acTypValAr = new TypedValue[]
{
new TypedValue((int)DxfCode.Start, "TEXT"),
};
// 将过滤条件赋值给SelectionFilter对象
SelectionFilter acSelFtr = new SelectionFilter(acTypValAr);
//获取当前文档编辑器
Editor ed = docMdf.acActiveDocument.Editor;
string msg = forRow ? "选择作为 行 分隔的点（至少2个） " : "选择作为 列 分隔的点（至少2个） ";
var pao = new PromptPointOptions(message: $"\n{msg}");
pao.AllowNone = true; // 允许用户直接按下回车或者右键，以退出 GetPoint() 方法，此时返回的 PromptPointResult.Status 为 None。
// 请求在图形区域选择对象。 GetSelection() 会阻塞线程，直到用户在AutoCAD界面中选择对象完成、取消或者出错。
PromptPointResult psr = ed.GetPoint(pao);
// 输出文本所对应的数据
if (psr.Status == PromptStatus.OK)
{
continueSelect = true;
return(psr.Value);
}
else
{
continueSelect = false;
return(default(Point3d));
}
}
private PromptSelectionResult GetCircles(Transaction trans)
{
TypedValue[] types = new TypedValue[] { new TypedValue((int)DxfCode.Start, "Circle") };
SelectionFilter selectionFilter = new SelectionFilter(types);
PromptSelectionResult selectedObject = editor.GetSelection(selectionFilter);
return selectedObject;
}
private void RadioButton2_Click(object sender, EventArgs e)
{
TypedValue[] array = new TypedValue[1];
Array array2 = array;
TypedValue typedValue;
typedValue..ctor(0, "TEXT");
array2.SetValue(typedValue, 0);
SelectionFilter selectionFilter = new SelectionFilter(array);
this.RadioButton2.Checked = true;
this.Hide();
Class36.SetFocus(Application.DocumentManager.MdiActiveDocument.Window.Handle);
PromptSelectionResult selection = this.document_0.Editor.GetSelection(selectionFilter);
if (selection.Status == 5100)
{
this.selectionSet_0 = selection.Value;
this.long_0 = (long)this.selectionSet_0.Count;
if (this.long_0 == 0L)
{
Class36.smethod_60("没有选择任何文字对象\r\n");
}
else
{
Class36.smethod_60("当前选择集体" + this.long_0.ToString() + "个文字对象\r\n");
}
this.Show();
}
this.Button1.Enabled = true;
this.Button2.Enabled = true;
this.Button3.Enabled = true;
this.Label3.Text = "";
}
buildSSet(TypedValue[] tvs, Point3dCollection pnts3d)
{
SelectionFilter filter = new SelectionFilter(tvs);
PromptSelectionResult psr = BaseObjs._editor.SelectCrossingPolygon(pnts3d, filter);
return(psr.Value);
}
/// <summary>
/// </summary>
/// <param name="docMdf"></param>
/// <returns></returns>
private static ObjectId[] SelectDims(DocumentModifier docMdf)
{
var ed = docMdf.acEditor;
var filterType = new[]
{
new TypedValue((int)DxfCode.Start, "DIMENSION"),
// 将标注类型限制为转角标注与对齐标注
new TypedValue((int)DxfCode.Operator, "<OR"),
new TypedValue(100, "AcDbAlignedDimension)"),
new TypedValue(100, "AcDbRotatedDimension))"),
new TypedValue((int)DxfCode.Operator, "OR>")
};
var filter = new SelectionFilter(filterType);
// Create our options object
var pso = new PromptSelectionOptions();
var kws = pso.Keywords.GetDisplayString(true);
pso.MessageForAdding = $"\n选择标注对象"; // 当用户在命令行中输入A（或Add）时，命令行出现的提示字符。
pso.MessageForRemoval = pso.MessageForAdding; // 当用户在命令行中输入Re（或Remove）时，命令行出现的提示字符。
var res = ed.GetSelection(pso, filter);
if (res.Status == PromptStatus.OK)
{
return(res.Value.GetObjectIds());
}
return(null);
}
static ObjectIdCollection GetSelectPolyline(bool isSingleSelect)
{
//过滤选择polyline
var tvs = new[]
{
new TypedValue((int)DxfCode.Operator, "<or"),
new TypedValue((int)DxfCode.Start, "LWPOLYLINE"),
new TypedValue((int)DxfCode.Start, "POLYLINE"),
new TypedValue((int)DxfCode.Operator, "or>")
};
var filter = new SelectionFilter(tvs);
var selectionOpts = new PromptSelectionOptions {
SingleOnly = isSingleSelect
};
var currDoc = Application.DocumentManager.MdiActiveDocument;
//选择polyline
PromptSelectionResult result = currDoc.Editor.GetSelection(selectionOpts, filter);
if (result.Status == PromptStatus.OK && result.Value.Count >= 1)
{
return(new ObjectIdCollection(result.Value.GetObjectIds()));
}
return(new ObjectIdCollection());
}
private SelectionSet SelectLines()
{
// create the typevalue (criteria what should be selected)
TypedValue[] tvs = new TypedValue[]
{
new TypedValue(Convert.ToInt32(DxfCode.Operator), "<or"),
new TypedValue(Convert.ToInt32(DxfCode.Start), "LINE"),
new TypedValue(Convert.ToInt32(DxfCode.Start), "POLYLINE"),
new TypedValue(Convert.ToInt32(DxfCode.Start), "LWPOLYLINE"),
new TypedValue(Convert.ToInt32(DxfCode.Start), "POLYLINE2D"),
new TypedValue(Convert.ToInt32(DxfCode.Start), "POLYLINE3d"),
new TypedValue(Convert.ToInt32(DxfCode.Operator), "or>"),
};
SelectionFilter oSf = new SelectionFilter(tvs);
PromptSelectionResult acPSR = AC.Editor.GetSelection(oSf);
//acDocEd.WriteMessage("선택");
//acDocEd.UpdateScreen();
if (acPSR.Status != PromptStatus.OK)
{
AC.Editor.WriteMessage("\n선택이 취소되었습니다.");
AC.Editor.PostCommandPrompt();
return(null);
}
AC.Doc.GetAcadDocument();
return(acPSR.Value);
}
getEntityatPoint(Point3d pnt3d, List <Type> types, string layer, double offset = 0.0)
{
int k = types.Count;
TypedValue[] TVs = new TypedValue[k + 3];
TVs.SetValue(new TypedValue((int)DxfCode.Operator, "<OR"), 0);
for (int i = 0; i < types.Count; i++)
{
TVs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(types[i]).DxfName), i + 1);
}
TVs.SetValue(new TypedValue((int)DxfCode.Operator, "OR>"), k + 1);
TVs.SetValue(new TypedValue((int)DxfCode.LayerName, layer), k + 2);
SelectionFilter FILTER = new SelectionFilter(TVs);
Point3d pnt3d1 = new Point3d(pnt3d.X - offset, pnt3d.Y - offset, 0.0);
Point3d pnt3d2 = new Point3d(pnt3d.X + offset, pnt3d.Y + offset, 0.0);
PromptSelectionResult PSR = BaseObjs._editor.SelectCrossingWindow(pnt3d1, pnt3d2, FILTER);
if (PSR.Status == PromptStatus.OK)
{
return(PSR.Value.GetObjectIds());
}
return(null);
}
public SelectionSet selectPoints(string message)
{
Document DOC = Application.DocumentManager.MdiActiveDocument;
Database DB = DOC.Database;
Editor ED = Application.DocumentManager.MdiActiveDocument.Editor;
TypedValue[] TVs = new TypedValue[1];
TVs.SetValue(new TypedValue((int)DxfCode.Start, "AECC_COGO_POINT"), 0);
SelectionFilter FILTER = new SelectionFilter(TVs);
PromptSelectionOptions PSO = new PromptSelectionOptions();
PSO.MessageForAdding = message;
PromptSelectionResult PSR = null;
using (Transaction TR = DB.TransactionManager.StartTransaction())
{
try
{
PSR = ED.GetSelection(PSO, FILTER);
}
catch (System.Exception ex) {
Application.ShowAlertDialog(ex.Message + " DragLabel.cs: line: 73");
BaseObjs.writeDebug(ex.Message + " DragLabel.cs: line: 73");
}
if (PSR.Status == PromptStatus.OK)
{
return(PSR.Value);
}
}
return(null);
} // selectPoints
public HashSet <ObjectId> EditorSelectCrossingWindow(Editor editor, List <Point3d> pts)
{
TypedValue[] filterList = new TypedValue[1];
filterList[0] = new TypedValue(0, "INSERT,LINE,LWPOLYLINE");
SelectionFilter filter = new SelectionFilter(filterList);
HashSet <ObjectId> choosenIds = new HashSet <ObjectId>();
PromptSelectionResult selRes = editor.SelectCrossingWindow(pts[0], pts[2], filter);
if (selRes.Status == PromptStatus.OK)
{
foreach (ObjectId id in selRes.Value.GetObjectIds())
{
choosenIds.Add(id);
}
}
PromptSelectionResult selResReversed = editor.SelectCrossingWindow(pts[2], pts[0], filter);
if (selResReversed.Status == PromptStatus.OK)
{
foreach (ObjectId id in selResReversed.Value.GetObjectIds())
{
choosenIds.Add(id);
}
}
return(choosenIds);
}
public void Getlayer()
{
string dir = null;
System.Windows.Forms.FolderBrowserDialog dialog = new System.Windows.Forms.FolderBrowserDialog();
if (dialog.ShowDialog() == DialogResult.OK)
{
string foldPath = dialog.SelectedPath;
dir = foldPath;
}
if (dir == null)
{
return;
}
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = db.TransactionManager;
List <string> layersName = LayersToList(db);
TransactionControl(() =>
{
foreach (var layerName in layersName)
{
TypedValue[] filterlist = new TypedValue[1];
filterlist[0] = new TypedValue(8, layerName);
SelectionFilter filter = new SelectionFilter(filterlist);
PromptSelectionResult selRes = ed.SelectAll(filter);
if (selRes.Status != PromptStatus.OK)
{
ed.WriteMessage(
"\nerror in getting the selectAll");
return;
}
ObjectId[] ids = selRes.Value.GetObjectIds();
ObjectIdCollection sourceIds = new ObjectIdCollection();
foreach (var id in ids)
{
Entity entity = (Entity)tm.GetObject(id, OpenMode.ForRead, true);
sourceIds.Add(id);
}
Database destDb = new Database(true, true);
ObjectId sourceMsId = SymbolUtilityServices.GetBlockModelSpaceId(db);
ObjectId destDbMsId = SymbolUtilityServices.GetBlockModelSpaceId(destDb);
IdMapping mapping = new IdMapping();
db.WblockCloneObjects(sourceIds, destDbMsId, mapping, DuplicateRecordCloning.Replace, false);
destDb.SaveAs(dir + "\\" + layerName + ".dwg", DwgVersion.Current);
}
});
}
public void TestBrepUnion()
{
var doc = Application.DocumentManager.MdiActiveDocument;
var db = doc.Database;
var ed = doc.Editor;
var tvs = new[] { new TypedValue((int)DxfCode.Start, "LWPOLYLINE") };
var selFilter = new SelectionFilter(tvs);
var sel = ed.GetSelection(selFilter);
if (sel.Status != PromptStatus.OK)
{
return;
}
using (var t = db.TransactionManager.StartTransaction())
{
var idsPls = sel.Value.GetObjectIds();
var pls = new List <Polyline>();
foreach (var item in idsPls)
{
var pl = item.GetObject(OpenMode.ForRead) as Polyline;
pls.Add(pl);
}
var union = pls.Union(null);
t.Commit();
}
}
/// <summary>选择多个多面网格 </summary>
/// <param name="docMdf"></param>
/// <returns></returns>
private static ObjectId[] SelectPolyfacemeshes(DocumentModifier docMdf)
{
var ed = docMdf.acEditor;
var filterType = new[]
{
new TypedValue((int)DxfCode.Start, "POLYLINE"),
new TypedValue((int)100, "AcDbPolyFaceMesh")
};
var filter = new SelectionFilter(filterType);
// Create our options object
var pso = new PromptSelectionOptions();
var kws = pso.Keywords.GetDisplayString(true);
pso.MessageForAdding = $"\n选择多面网格"; // 当用户在命令行中输入A（或Add）时，命令行出现的提示字符。
pso.MessageForRemoval = pso.MessageForAdding; // 当用户在命令行中输入Re（或Remove）时，命令行出现的提示字符。
var res = ed.GetSelection(pso, filter);
if (res.Status == PromptStatus.OK)
{
return(res.Value.GetObjectIds());
}
return(null);
}
/// <summary> 选择多段线以修改其疏密 </summary>
private static Polyline[] SelectPolylines(DocumentModifier docMdf)
{
var ed = docMdf.acEditor;
var filterType = new[]
{
new TypedValue((int)DxfCode.Start, "LWPOLYLINE")
};
var filter = new SelectionFilter(filterType);
// Create our options object
var pso = new PromptSelectionOptions();
var kws = pso.Keywords.GetDisplayString(true);
pso.MessageForAdding = $"\n选择多段线以修改其疏密"; // 当用户在命令行中输入A（或Add）时，命令行出现的提示字符。
pso.MessageForRemoval = pso.MessageForAdding; // 当用户在命令行中输入Re（或Remove）时，命令行出现的提示字符。
var res = ed.GetSelection(pso, filter);
if (res.Status == PromptStatus.OK)
{
return
(res.Value.GetObjectIds().Select(id => id.GetObject(OpenMode.ForRead)).OfType <Polyline>().ToArray());
}
return(null);
}
public ObjectId[] featureClassChecker(MSCFeatureClass fc)
{
ObjectId[] result;
try
{
ResultBuffer fCQuery = fc.FCQuery;
SelectionFilter selectionFilter = new SelectionFilter(fCQuery.AsArray());
PromptSelectionResult promptSelectionResult = SingletonsList.ed.SelectAll(selectionFilter);
if (promptSelectionResult.Status == (PromptStatus)5100 && promptSelectionResult.Value.Count > 0)
{
ObjectId[] objectIds = promptSelectionResult.Value.GetObjectIds();
if (objectIds.Length != 0)
{
result = objectIds;
return(result);
}
}
result = null;
}
catch (Exception ex)
{
if (SingletonsList.ed != null)
{
SingletonsList.ed.WriteMessage("\n" + AfaStrings.Error + " " + ex.Message);
}
result = null;
}
return(result);
}
/// <summary>
/// 사용자가 선택한 여러 객체들을 가져오는 메소드입니다.
/// </summary>
/// <param name="message">선택 전, 프롬프트에 표시할 메시지</param>
/// <param name="Filter">선택이 가능하게 할 조건</param>
/// <returns></returns>
public static ObjectId[] GetEntities(string message = "객체 선택", params TypedValue[] Filter)
{
ActivateApplication();
Document doc = AcadApp.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptSelectionOptions pso = new PromptSelectionOptions();
pso.MessageForAdding = "\n" + message;
pso.MessageForRemoval = "\n" + message;
SelectionFilter oSF = new SelectionFilter(Filter);
PromptSelectionResult psr = ed.GetSelection(pso, oSF);
if (psr.Status != PromptStatus.OK)
{
return new ObjectId[] { }
}
;
return(psr.Value.GetObjectIds());
}
selectMTextForMoving(string layer, out bool escape)
{
escape = true;
ObjectId id = ObjectId.Null;
TypedValue[] TVs = new TypedValue[2];
TVs.SetValue(new TypedValue((int)DxfCode.Start, "MTEXT"), 0);
TVs.SetValue(new TypedValue((int)DxfCode.LayerName, layer), 1);
SelectionFilter filter = new SelectionFilter(TVs);
PromptSelectionOptions pso = new PromptSelectionOptions();
pso.MessageForAdding = "Select MText to Move";
PromptSelectionResult PSR = BaseObjs._editor.GetSelection(pso, filter);
if (PSR.Status == PromptStatus.OK)
{
id = PSR.Value.GetObjectIds()[0];
escape = false;
}
return(id);
}
/// <summary> 选择多个单行文字 </summary>
/// <param name="docMdf"></param>
/// <returns></returns>
private static List <DBText> GetDbTexts(DocumentModifier docMdf)
{
// Create our options object
var pso = new PromptSelectionOptions();
// Add our keywords
// Set our prompts to include our keywords
string kws = pso.Keywords.GetDisplayString(true);
pso.MessageForAdding = "\n 选择多个单行文字" + kws; // 当用户在命令行中输入A（或Add）时，命令行出现的提示字符。
pso.MessageForRemoval = "\n 选择多个单行文字 " + kws;
// 当用户在命令行中输入Re（或Remove）时，命令行出现的提示字符。
var f = new SelectionFilter(new TypedValue[] { new TypedValue((int)DxfCode.Start, "TEXT") });
var texts = new List <DBText>();
var res = docMdf.acEditor.GetSelection(pso, f);
if (res.Status == PromptStatus.OK)
{
var ids = res.Value.GetObjectIds();
foreach (var id in ids)
{
var text = id.GetObject(OpenMode.ForRead) as DBText;
if (text != null)
{
texts.Add(text);
}
}
}
return(texts);
}
getEntityatPoint(Point3d pnt3d, Type type, string layer, double offset = 0.0)
{
List <ObjectId> ids = new List <ObjectId>();
TypedValue[] tvs = new TypedValue[2];
tvs.SetValue(new TypedValue((int)DxfCode.Start, RXClass.GetClass(type).DxfName), 0);
tvs.SetValue(new TypedValue((int)DxfCode.LayerName, layer), 1);
SelectionFilter filter = new SelectionFilter(tvs);
Point3d pnt3d1 = new Point3d(pnt3d.X - offset, pnt3d.Y - offset, 0.0);
Point3d pnt3d2 = new Point3d(pnt3d.X + offset, pnt3d.Y + offset, 0.0);
//Draw.addLine(pnt3d1, pnt3d2);
PromptSelectionResult psr = BaseObjs._editor.SelectCrossingWindow(pnt3d2, pnt3d1, filter);
if (psr.Status == PromptStatus.OK)
{
ObjectId[] idss = psr.Value.GetObjectIds();
foreach (ObjectId id in idss)
{
ids.Add(id);
}
}
return(ids);
}
private SelectionFilter CreateFilter(SearchFilterTransferObject data)
{
var customerRepository = ObjectFactory.GetInstance <ICustomerRepository>();
var projectRepository = ObjectFactory.GetInstance <IProjectRepository>();
var taskRepository = ObjectFactory.GetInstance <ITaskRepository>();
var userRepository = ObjectFactory.GetInstance <IUserRepository>();
var filter = new SelectionFilter();
foreach (var customerId in data.Customers)
{
filter.AddCustomer(customerRepository.GetByID(customerId));
}
foreach (var projectId in data.Projects)
{
filter.AddProject(projectRepository.GetByID(projectId));
}
foreach (var taskId in data.Tasks)
{
filter.AddTask(taskRepository.GetById(taskId));
}
if (data.Users != null)
{
filter.Users = data.Users.Select(u => userRepository.GetByUserID(u)).ToList();
}
filter.DateFrom = data.DateFrom;
filter.DateTo = data.DateTo;
return(filter);
}
public static void SelectEnt2()
{
//��ȡEditor����
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;
// ����ѡ��ѡ��
PromptSelectionOptions selectionOp = new PromptSelectionOptions();
//����ѡ��������ֻѡ������
TypedValue[] filList = new TypedValue[1];
filList[0] = new TypedValue((int)DxfCode.Start, "INSERT");
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult ssRes = ed.GetSelection(selectionOp, filter);
if (ssRes.Status == PromptStatus.OK)
{
SelectionSet SS = ssRes.Value;
int nCount = SS.Count;
ed.WriteMessage("ѡ����{0}����" , nCount);
}
}
public void AddLinesToGroup()
{
Editor editor = dwg.Editor;
using (Transaction acadTrans = CurrentDatabase.TransactionManager.StartTransaction())
{
GroupsInformation groupsEntities = new GroupsInformation(acadTrans, CurrentDatabase);
//Спрашиваем имя группы
string GroupName = AskForGroup(true, groupsEntities.GroupList);
if (GroupName != null)
{
// Готовим опции для запроса элементов группы
PromptSelectionOptions acadSelectionOptions = new PromptSelectionOptions();
acadSelectionOptions.MessageForAdding = "\nУкажите объекты группы " + GroupName;
//Выделять будем только линии и полилинии. Создаем фильтр
TypedValue[] acadFilterValues = new TypedValue[4];
acadFilterValues.SetValue(new TypedValue((int)DxfCode.Operator, "<OR"),0);
acadFilterValues.SetValue(new TypedValue((int)DxfCode.Start, "LINE"),1);
acadFilterValues.SetValue(new TypedValue((int)DxfCode.Start, "LWPOLYLINE"),2);
acadFilterValues.SetValue(new TypedValue((int)DxfCode.Operator, "OR>"),3);
SelectionFilter acadSelFilter = new SelectionFilter(acadFilterValues);
//Используем фильтр для выделения
PromptSelectionResult acadSelSetPrompt = dwg.Editor.GetSelection(acadSelectionOptions, acadSelFilter);
//Если выбраны объекты - едем дальше
if (acadSelSetPrompt.Status == PromptStatus.OK)
{
// Формируем коллекцию выделенных объектов
SelectionSet acadSelectedObjects = acadSelSetPrompt.Value;
// Проходим по каждому объекту в выделении
foreach (SelectedObject selectedObj in acadSelectedObjects)
{
if (selectedObj!=null)
{
groupsEntities.AppendGroupToObject(selectedObj.ObjectId, GroupName);
}
}
}
}
acadTrans.Commit();
}
}
private SelectionFilter GetSelectionFilter()
{
TypedValue[] acTypeValAr = new TypedValue[1] {
new TypedValue((int)DxfCode.Start, "INSERT")
};
// the instantiating of a selection filter which selects on certain layers and which selects only lines
SelectionFilter sf = new SelectionFilter(acTypeValAr);
return sf;
}
private void btnSelectShapes_Click(object sender, EventArgs e)
{
PosShape copy = GetSelected();
if (copy == null || copy.IsBuiltIn) return;
// Select shapes
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
using (EditorUserInteraction UI = ed.StartUserInteraction(this))
{
TypedValue[] tvs = new TypedValue[] {
new TypedValue((int)DxfCode.Operator, "<OR"),
new TypedValue((int)DxfCode.Start, "LINE"),
new TypedValue((int)DxfCode.Start, "ARC"),
new TypedValue((int)DxfCode.Start, "CIRCLE"),
new TypedValue((int)DxfCode.Start, "TEXT"),
new TypedValue((int)DxfCode.Operator, "OR>")
};
SelectionFilter filter = new SelectionFilter(tvs);
PromptSelectionResult result = ed.GetSelection(filter);
if (result.Status != PromptStatus.OK || result.Value.Count == 0) return;
int fieldCount = 1;
copy.Items.Clear();
Database db = HostApplicationServices.WorkingDatabase;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
try
{
foreach (SelectedObject sel in result.Value)
{
DBObject obj = tr.GetObject(sel.ObjectId, OpenMode.ForRead);
bool visible = true;
Entity en = obj as Entity;
if (en != null)
{
LayerTableRecord ltr = (LayerTableRecord)tr.GetObject(en.LayerId, OpenMode.ForRead);
if (ltr != null)
{
visible = ltr.IsPlottable;
}
}
if (obj is Line)
{
Line line = obj as Line;
copy.Items.Add(new PosShape.ShapeLine(line.Color, line.StartPoint.X, line.StartPoint.Y, line.EndPoint.X, line.EndPoint.Y, visible));
}
else if (obj is Arc)
{
Arc arc = obj as Arc;
copy.Items.Add(new PosShape.ShapeArc(arc.Color, arc.Center.X, arc.Center.Y, arc.Radius, arc.StartAngle, arc.EndAngle, visible));
}
else if (obj is Circle)
{
Circle circle = obj as Circle;
copy.Items.Add(new PosShape.ShapeCircle(circle.Color, circle.Center.X, circle.Center.Y, circle.Radius, visible));
}
else if (obj is DBText)
{
DBText text = obj as DBText;
if (text.TextString == "A" && fieldCount < 1) fieldCount = 1;
if (text.TextString == "B" && fieldCount < 2) fieldCount = 2;
if (text.TextString == "C" && fieldCount < 3) fieldCount = 3;
if (text.TextString == "D" && fieldCount < 4) fieldCount = 4;
if (text.TextString == "E" && fieldCount < 5) fieldCount = 5;
if (text.TextString == "F" && fieldCount < 6) fieldCount = 6;
double x = text.Position.X;
double y = text.Position.Y;
if (text.AlignmentPoint.X != 0.0 || text.AlignmentPoint.Y != 0.0)
{
x = text.AlignmentPoint.X;
y = text.AlignmentPoint.Y;
}
copy.Items.Add(new PosShape.ShapeText(text.Color, x, y, text.Height, text.WidthFactor, text.TextString, "romans.shx", text.HorizontalMode, text.VerticalMode, visible));
}
}
}
catch (System.Exception ex)
{
System.Windows.Forms.MessageBox.Show("Error: " + ex.Message, "RebarPos", System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Error);
}
}
udFields.Value = fieldCount;
}
SetShape();
}
public static void FilterSelectionSet()
{
Editor acDocEd = AcadApp.Application.DocumentManager.MdiActiveDocument.Editor;
//使用选择过滤器定义选择集规则
//选择过滤器由TypedValue形式的一对参数构成。TypedValue的第一个参数表明过滤器的类型（例如对象），第二个参数为要过滤的值（例如圆）。过滤器类型是一个DXF组码，用来指定使用哪种过滤器。一些常用过滤器类型列表如下。
//选择过滤器可以包含过滤多个属性或对象的条件。可以通过声明一个包含足够数量元素的数组来定义总的过滤条件，数组的每个元素代表一个过滤条件。
TypedValue[] acTypValAr = new TypedValue[1]; // 创建一个TypedValue数组来定义过滤器条件
acTypValAr.SetValue(new TypedValue((int)DxfCode.Start, "CIRCLE"), 0);
//**************
// 创建TypedValue数组定义过滤条件
//TypedValue[] acTypValAr = new TypedValue[3];
//acTypValAr.SetValue(new TypedValue((int)DxfCode.Color, 5), 0);
//acTypValAr.SetValue(new TypedValue((int)DxfCode.Start, "CIRCLE"), 1);
//acTypValAr.SetValue(new TypedValue((int)DxfCode.LayerName, "0"), 2);
//**************
// 将过滤器条件赋值给SelectionFilter对象
SelectionFilter acSelFtr = new SelectionFilter(acTypValAr);
PromptSelectionResult acSSPrompt;
acSSPrompt = acDocEd.GetSelection(acSelFtr);
// 提示状态OK，表示用户已选完
if (acSSPrompt.Status == PromptStatus.OK)
{
SelectionSet acSSet = acSSPrompt.Value;
AcadApp.Application.ShowAlertDialog("Number of objects selected: " + acSSet.Count.ToString());
}
else
{
AcadApp.Application.ShowAlertDialog("Numberof objects selected: 0");
}
}
public void GetIntersectionsRiver()
{
Database db = HostApplicationServices.WorkingDatabase;
Autodesk.AutoCAD.ApplicationServices.Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Transaction tr = db.TransactionManager.StartTransaction();
#region For Word
string filepath = "D:\\intersections_rivers.docx";
using (WordprocessingDocument docX = WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
try
{
// Add a main document part.
MainDocumentPart mainPart = docX.AddMainDocumentPart();
StyleDefinitionsPart styleDefinitionsPart = mainPart.AddNewPart<StyleDefinitionsPart>();
Styles styles1 = new Styles();
DocDefaults docDefaults =
new DocDefaults(
new RunPropertiesDefault(new RunPropertiesBaseStyle(new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
}, new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" })),
new ParagraphPropertiesDefault(new SpacingBetweenLines() { After = "0", Line = "240", LineRule = LineSpacingRuleValues.Auto }));
styles1.AppendChild(docDefaults);
styleDefinitionsPart.Styles = styles1;
mainPart.Document = new DocumentFormat.OpenXml.Wordprocessing.Document();
DocumentFormat.OpenXml.Wordprocessing.Body body = mainPart.Document.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Body());
ParagraphProperties paragraphProperties1 = new ParagraphProperties(
new Justification() { Val = JustificationValues.Center },
new ParagraphMarkRunProperties(
new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
},
new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" }
));
Paragraph para = body.AppendChild(new Paragraph());
para.AppendChild(paragraphProperties1);
Run run = para.AppendChild(new Run());
RunProperties runProperties1 = new RunProperties(
new Bold());
// String msg contains the text, "Hello, Word!"
run.AppendChild(runProperties1);
run.AppendChild(new Text("ПРИЛОЖЕНИЕ"));
run.AppendChild(new Break());
run.AppendChild(new Text("Ведомость пересечений"));
run.AppendChild(new Break());
var table = new DocumentFormat.OpenXml.Wordprocessing.Table();
// Create a TableProperties object and specify its border information.
TableProperties tblProp = new TableProperties(
new TableWidth() { Width = "9782", Type = TableWidthUnitValues.Dxa },
new TableIndentation() { Width = -318, Type = TableWidthUnitValues.Dxa },
new TableBorders(
new TopBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new BottomBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new LeftBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new RightBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideHorizontalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideVerticalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 }),
new DocumentFormat.OpenXml.Wordprocessing.TableStyle() { Val = "TableGrid" }
);
// Append the TableProperties object to the empty table.
table.AppendChild<TableProperties>(tblProp);
// Add 3 columns to the table.
TableGrid tg = new TableGrid(new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn(),
new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn());
table.AppendChild(tg);
TableRow tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 430 }),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1709" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Наимен. водотока")))),
//new TableCellProperties(new TableCellWidth() {Type = TableWidthUnitValues.Pct, Width = "500"})
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "3922" }),
new Paragraph(
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }),
new Run(new Text("Пикетное положение пересечения")))),
new TableCell(
new TableCellProperties(
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }),
new Run(new Text("Ширина водотока в межень")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1358" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new VerticalMerge() { Val = MergedCellValues.Restart }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Глуб. водотока")))),
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 3 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "2368" }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Горизонт воды")))),
new TableCell(new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "425" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Прим."))))
);
table.AppendChild(tr1);
TableRow tr2 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 419 }),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("От")))),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("До")))),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("половодье")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1260" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Дата съемки")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1108" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("На день съемки")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1108" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Макс.")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())));
table.AppendChild(tr2);
TableCellProperties tcp = new TableCellProperties(new GridSpan() { Val = 9 });
#endregion
while (true)
{
//using (tr)
//{
try
{
#region Поиск пересечений
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(db.CurrentSpaceId, OpenMode.ForWrite);
PromptEntityOptions peo = new PromptEntityOptions("\nВыбери polyline >>");
peo.SetRejectMessage("\nМожно только polyline >>");
peo.AddAllowedClass(typeof(Polyline), false);
PromptEntityResult res;
res = ed.GetEntity(peo);
if (res.Status != PromptStatus.OK)
{
break;
}
DBObject ent = (DBObject)tr.GetObject(res.ObjectId, OpenMode.ForRead);
if (ent == null) return;
PromptPointResult pPtRes;
PromptPointOptions pPtOpts = new PromptPointOptions("");
// Prompt for the start point
pPtOpts.Message = "\nВведи начало: ";
pPtRes = doc.Editor.GetPoint(pPtOpts);
PromptDoubleOptions getpik = new PromptDoubleOptions("\nВведи пикетаж (в формате числа, а не 0+00): ");
PromptDoubleResult getpikRes = doc.Editor.GetDouble(getpik);
//zoom
/*PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK)
return;*/
// Extract its extents
Extents3d ext;
Transaction trans = db.TransactionManager.StartTransaction();
using (trans)
{
Entity enti = (Entity)trans.GetObject(res.ObjectId, OpenMode.ForRead);
ext = enti.GeometricExtents;
trans.Commit();
}
ext.TransformBy(ed.CurrentUserCoordinateSystem.Inverse());
ZoomWin(ed, ext.MinPoint, ext.MaxPoint);
//
//Polyline poly = (Polyline)ent as Polyline;
Curve curv = ent as Curve;
DBObjectCollection pcurves = new DBObjectCollection();
curv.Explode(pcurves);
TypedValue[] values = new TypedValue[]
{
new TypedValue(0, "lwpolyline")
//might be added layer name to select curve:
//, new TypedValue(8, "mylayer")
};
SelectionFilter filter = new SelectionFilter(values);
Point3dCollection fence = new Point3dCollection();
double leng = curv.GetDistanceAtParameter(curv.EndParam) - curv.GetDistanceAtParameter(curv.StartParam);
// number of divisions along polyline to create fence selection
double step = leng / 256;// set number of steps to your suit
int num = Convert.ToInt32(leng / step);
for (int i = 0; i < num; i++)
{
Point3d pp = curv.GetPointAtDist(step * i);
fence.Add(curv.GetClosestPointTo(pp, false));
}
PromptSelectionResult selres = ed.SelectFence(fence, filter);
if (selres.Status != PromptStatus.OK) return;
Point3dCollection intpts = new Point3dCollection();
DBObjectCollection qcurves = new DBObjectCollection();
//ed.WriteMessage("\nCheck");
foreach (SelectedObject selobj in selres.Value)
{
DBObject obj = tr.GetObject(selobj.ObjectId, OpenMode.ForRead, false) as DBObject;
if (selobj.ObjectId != curv.ObjectId)
{
DBObjectCollection icurves = new DBObjectCollection();
Curve icurv = obj as Curve;
icurv.Explode(icurves);
foreach (DBObject dbo in icurves)
{
if (!qcurves.Contains(dbo))
qcurves.Add(dbo);
}
}
}
//ed.WriteMessage("\n{0}", qcurves.Count);
int j = 0;
Point3dCollection polypts = new Point3dCollection();
for (int i = 0; i < pcurves.Count; ++i)
{
for (j = 0; j < qcurves.Count; ++j)
{
Curve curve1 = pcurves[i] as Curve;
Curve curve2 = qcurves[j] as Curve;
Point3dCollection pts = new Point3dCollection();
curve1.IntersectWith(curve2, Intersect.OnBothOperands, pts, IntPtr.Zero, IntPtr.Zero);
foreach (Point3d pt in pts)
{
if (!polypts.Contains(pt))
polypts.Add(pt);
}
}
}
#endregion
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
table.AppendChild(new TableRow(
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 9 }),
new Paragraph(
new ParagraphProperties(
new ParagraphMarkRunProperties(new Bold()),
new Justification() { Val = JustificationValues.Center }),
new Run(new RunProperties(
new Bold()),
new Text("ПК" + ((int)(getpikRes.Value)).ToString("F0") + "-ПК" +
((int)(100 * getpikRes.Value + pline.Length) / 100).ToString("F0") + "+" +
((100 * getpikRes.Value + pline.Length) % 100).ToString("F")))))));
}
}
catch { ed.WriteMessage("\nError."); }
Autodesk.AutoCAD.ApplicationServices.Application.SetSystemVariable("osmode", 0);// optional
// for debug only
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog(string.Format("\nНайдено пересечений: {0}", polypts.Count));
if (polypts.Count == 0)
{
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
table.AppendChild(new TableRow(
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 9 }),
new Paragraph(
new ParagraphProperties(
new Justification() { Val = JustificationValues.Center }),
new Run(new Text("На данном участке трассы пересечения отсутствуют"))))));
}
}
catch { ed.WriteMessage("\nError."); }
}
else
{
//List<double> pik = new List<double>(polypts.Count);
double[] pik = new double[polypts.Count];
int numInter = 0;
foreach (Point3d inspt in polypts)
{
double dist = 0;
dist = 100 * getpikRes.Value;
// test for visulization only
/*Circle circ = new Circle(inspt, Vector3d.ZAxis, 10 * db.Dimtxt);
circ.ColorIndex = 1;
btr.AppendEntity(circ);
tr.AddNewlyCreatedDBObject(circ, true);*/
Point3d curr = pPtRes.Value, next = pPtRes.Value;
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
if ((pPtRes.Value == pline.GetLineSegmentAt(0).StartPoint) || (pPtRes.Value == pline.GetLineSegmentAt(0).EndPoint))
for (int i = 0; i < pline.NumberOfVertices - 2; i++)
{
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
if (Math.Abs(inspt.DistanceTo(curr) + inspt.DistanceTo(next) - curr.DistanceTo(next)) < 1)
{
dist += inspt.DistanceTo(curr);
ed.WriteMessage(((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F") + "\n");
break;
}
else
dist += curr.DistanceTo(next);
curr = next;
}
else
for (int i = pline.NumberOfVertices - 3; i >= 0; i--)
{
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
if (Math.Abs(inspt.DistanceTo(curr) + inspt.DistanceTo(next) - curr.DistanceTo(next)) < 1)
{
dist += inspt.DistanceTo(curr);
ed.WriteMessage(((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F") + "\n");
break;
}
else
dist += curr.DistanceTo(next);
curr = next;
}
}
}
catch
{
ed.WriteMessage("\nInvalid polyline.");
}
pik[numInter] = dist;
numInter++;
//ed.WriteMessage(" {0:0.00}\n", dist);
}
//pik.Sort();
Array.Sort(pik);
for (int i = 0; i < polypts.Count; i++)
{
tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run())),
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 }),
new Paragraph(
new ParagraphProperties(
new Justification() { Val = JustificationValues.Center }),
new Run(new Text(((int)pik[i] / 100).ToString("F0") + "+" + (pik[i] % 100).ToString("F"))))),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run()))
);
table.AppendChild(tr1);
}
}
}
catch
{
ed.WriteMessage("\nError");
}
//}
}
tr.Commit();
body.AppendChild(table);
body.AppendChild(
new SectionProperties(
new PageMargin()
{
Top = 1134,
Right = (UInt32Value)850U,
Bottom = 1134,
Left = (UInt32Value)1418U,
Header = (UInt32Value)708U,
Footer = (UInt32Value)708U,
Gutter = (UInt32Value)0U
}));
ed.WriteMessage("\nДокумент сохранен в D:\\intersections_rivers.docx");
}
catch
{
ed.WriteMessage("\nError.");
}
}
}
private PromptSelectionResult GetBlockIds()
{
TypedValue[] typedValue = GetTypedValue();
SelectionFilter filter = new SelectionFilter(typedValue);
PromptSelectionResult selectedMarks = editor.GetSelection(filter);
return selectedMarks;
}
//create layer for signature
private ObjectId createLayer(string lyname)
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Core.Application.DocumentManager.MdiActiveDocument.Editor;
Database db = HostApplicationServices.WorkingDatabase;
//search the specific layer
TypedValue[] filList = new TypedValue[1] {
new TypedValue((int)DxfCode.LayerName, lyname)
};
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult selRes = ed.SelectAll(filter);
if (selRes.Status != PromptStatus.OK &&
selRes.Status != PromptStatus.Error) //error means no such layer. can continue the following code
{
ed.WriteMessage("\nerror in getting all entities on a layer named " + lyname + " >>error:" + selRes.Status);
return ObjectId.Null;
}
LayerTableRecord signatureLayer = null;
try
{
using (Transaction tr =
db.TransactionManager.StartTransaction())
{
if (selRes.Status == PromptStatus.OK)
{
ed.WriteMessage("\nTo delete entities on the signature layer");
//delete all signatures (solids) on the old layer
ObjectId[] ids = selRes.Value.GetObjectIds();
foreach (ObjectId eachentid in ids)
{
Entity oEnt = tr.GetObject(eachentid, OpenMode.ForWrite) as Entity;
oEnt.Erase();
}
}
ed.WriteMessage("\nTo delete signature layer");
LayerTable layerTable = tr.GetObject(db.LayerTableId, OpenMode.ForWrite) as LayerTable;
if (layerTable.Has(lyname))
{
//delete the old layer
ObjectId LTR_id = layerTable[lyname];
ObjectIdCollection idCol = new ObjectIdCollection();
idCol.Add(LTR_id);
db.Purge(idCol);
LayerTableRecord oLTR = tr.GetObject(LTR_id, OpenMode.ForWrite) as LayerTableRecord;
oLTR.Erase();
}
ed.WriteMessage("\nTo create signature layer");
//create new layer
signatureLayer = new LayerTableRecord();
signatureLayer.Name = lyname;
layerTable.Add(signatureLayer);
tr.AddNewlyCreatedDBObject(signatureLayer, true);
tr.Commit();
}
if (signatureLayer != null)
return signatureLayer.ObjectId;
else
return ObjectId.Null;
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
ed.WriteMessage("\nerror in create layer " + ex.ToString());
return ObjectId.Null;
}
}
public void updateTBFromFile()
{
Database db = HostApplicationServices.WorkingDatabase;
Editor ed = Autodesk.AutoCAD.ApplicationServices.Core.Application.DocumentManager.MdiActiveDocument.Editor;
//read external json
PromptFileNameResult pfnr = ed.GetFileNameForOpen("\nSpecify json file");
if (pfnr.Status != PromptStatus.OK)
{
ed.WriteMessage("\nerror to read external json file " + pfnr.Status.ToString());
return;
}
string paramFile = pfnr.StringResult;
string rawJsonContent = File.ReadAllText(paramFile);
Transaction tr = db.TransactionManager.StartTransaction();
// Start the transaction
try
{
//convert json to json class
jsonDrawing jsonDrawingInstance = JsonConvert.DeserializeObject<jsonDrawing>(rawJsonContent);
if (jsonDrawingInstance == null)
{
ed.WriteMessage("\nraw json file is bad!\n");
return;
}
//string tblayer = jsonDrawingInstance.tblayer;
//create the layer for signature
ObjectId lyId = createLayer("signature_layer");
if (lyId.IsNull)
{
ed.WriteMessage("\nlayer cannot be created");
return;
}
// Build a filter list so that only block references are selected
TypedValue[] filList = new TypedValue[1] {
new TypedValue((int)DxfCode.Start, "INSERT")
};
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult res = ed.SelectAll(filter);
// Do nothing if selection is unsuccessful
if (res.Status != PromptStatus.OK)
{
ed.WriteMessage("\nno any Insert in this drawing!");
return;
}
SelectionSet selSet = res.Value;
ObjectId[] idArray = selSet.GetObjectIds();
foreach (ObjectId blkId in idArray)
{
BlockReference blkRef = (BlockReference)tr.GetObject(blkId, OpenMode.ForRead);
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(blkRef.BlockTableRecord, OpenMode.ForRead);
ed.WriteMessage("\nBlock: " + btr.Name);
btr.Dispose();
AttributeCollection attCol = blkRef.AttributeCollection;
foreach (ObjectId attId in attCol)
{
AttributeReference attRef = (AttributeReference)tr.GetObject(attId, OpenMode.ForWrite);
//check the block ref of title block on the specific layer
if (attRef.Layer == Helper.tblayer)
{
foreach (var eachAtt in jsonDrawingInstance.tbjson)
{
if (eachAtt.tag == attRef.Tag)
{
ed.WriteMessage("\nbegin: " + eachAtt.tag + " \n");
ed.WriteMessage("\nis image: " + eachAtt.isImage + " \n");
if (eachAtt.isImage)
{
attRef.TextString = "";
//create image for signature
createImages(eachAtt, tr, lyId);
}
else
{
attRef.TextString = eachAtt.content;
}
break;
ed.WriteMessage("\nend: " + eachAtt.tag + " \n");
}
}
}
}
}
tr.Commit();
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
ed.WriteMessage(("\nException: " + ex.Message));
}
finally
{
tr.Dispose();
}
db.SaveAs("newTB.dwg", DwgVersion.Newest);
}
/// <summary>
///
/// </summary>
/// <param name="isLocalTest">true: simulate an signature image to a json string. the example image is testsig.png</param>
void GenerateTBJson(bool isLocalTest = false)
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Core.Application.DocumentManager.MdiActiveDocument.Editor;
Database db = HostApplicationServices.WorkingDatabase;
Transaction tr = db.TransactionManager.StartTransaction();
try
{
ed.WriteMessage("\nbegin att checking");
// Build a filter list so that only block references are selected
TypedValue[] filList = new TypedValue[1] {
new TypedValue((int)DxfCode.Start, "INSERT")
};
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult res = ed.SelectAll(filter);
// Do nothing if selection is unsuccessful
if (res.Status != PromptStatus.OK)
return;
SelectionSet selSet = res.Value;
ObjectId[] idArray = selSet.GetObjectIds();
List<jsonAttribute> jsonDataArray = new List<jsonAttribute>();
ed.WriteMessage("\nbegin each checking");
foreach (ObjectId blkId in idArray)
{
BlockReference blkRef = (BlockReference)tr.GetObject(blkId, OpenMode.ForRead);
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(blkRef.BlockTableRecord, OpenMode.ForRead);
ed.WriteMessage("\nBlock: " + btr.Name);
btr.Dispose();
AttributeCollection attCol = blkRef.AttributeCollection;
//attribute index
int index = 0;
foreach (ObjectId attId in attCol)
{
AttributeReference attRef = (AttributeReference)tr.GetObject(attId, OpenMode.ForRead);
if (attRef.Layer == "AM_BOR")
{
ed.WriteMessage("\nbegin: " + attRef.Tag);
string _height = attRef.Height.ToString();
string _tag = attRef.Tag;
int pFrom = _tag.IndexOf("{") + 1;
int pTo = _tag.LastIndexOf("}");
string _width_radio = _tag.Substring(pFrom, pTo - pFrom);
string _pos = attRef.Position.X.ToString() + "," +
attRef.Position.Y.ToString() + "," +
attRef.Position.Z.ToString();
string _cont = attRef.TextString;
var jsonData = new jsonAttribute()
{
tag = _tag,
height = _height,
width_ratio = _width_radio,
position = _pos,
content = _cont,
isImage = false,
imgbase64 = ""
};
//if this is to test an image locally
//only simulate the attribute in even index will be an image
if (isLocalTest && (index%2==1))
{
jsonData.isImage = true;
jsonData.imgbase64 = imageToBase64();
}
jsonDataArray.Add(jsonData);
ed.WriteMessage("end: " + attRef.Tag);
index++;
}
//tag: {12.3} is the\ ratio of the defined width for the text to the text height. For example, if the text height is 5 units, and the width of the available space is 100 units, the value between the curly brackets is 20.
//http://knowledge.autodesk.com/support/autocad-mechanical/getting-started/caas/CloudHelp/cloudhelp/2015/ENU/AutoCAD-Mechanical/files/GUID-ADFE83F7-CE92-4996-8231-D3C5FD5A1A92-htm.html
}
}
tr.Commit();
var jsonDrawingInstance = new jsonDrawing()
{
tbjson = jsonDataArray.ToArray<jsonAttribute>()
};
// this is the Newtonsoft API method
string json_data = JsonConvert.SerializeObject(jsonDrawingInstance);
var jsonOut = Path.Combine(Helper.jsonfilename);
FileStream fs = new FileStream(jsonOut, FileMode.Create);
StreamWriter sw = new StreamWriter(fs);
try
{
sw.Write(json_data);
sw.Flush();
}
catch (System.Exception ex)
{
System.Windows.Forms.MessageBox.Show(ex.Message.ToString());
}
finally
{
sw.Close();
fs.Close();
}
ed.WriteMessage("\nend att checking");
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
ed.WriteMessage(("\nException: " + ex.Message));
return;
}
finally
{
tr.Dispose();
}
}
public static void SelectTables(string msg)
{
Document acDoc = Application.DocumentManager.MdiActiveDocument; //Текущий документ.
Editor acDocEd = acDoc.Editor; // Editor текущего документа.
Database acDocDb = acDoc.Database; // Database текущего документа.
Dictionary<string, string> globalVolumesNamesAndUnits = new Dictionary<string, string>(); //Наименования объемов и единиц измерения
Dictionary<double, ObjectId> globalPKsAndObjectIds = new Dictionary<double, ObjectId>(); //ПК для подсчета объемов и соответвующие им идентификаторы определений блоков с таблицами
using (acDoc.LockDocument()) // блокировка документа
{
using (Transaction acTrans = acDocDb.TransactionManager.StartTransaction()) // Начало Транзакции.
{
//открываем таблицу блоков чертежа для чтения
BlockTable acDocDbBlockTable = (BlockTable)acTrans.GetObject(acDocDb.BlockTableId, OpenMode.ForRead);
// Создание TypedValue array для определение параметров фильтра.
var acTypedValueArray = new TypedValue[2];
acTypedValueArray.SetValue(new TypedValue((int)DxfCode.Start, "INSERT"), 0); // Параметр фильтра под номером 0.
acTypedValueArray.SetValue(new TypedValue((int)DxfCode.LayerName, "acVlm_*"), 1); // Параметр фильтра под номером 1.
// Assign the filter criteria to a SelectionFilter object
var acSelectionFilterObject = new SelectionFilter(acTypedValueArray);
// Задание опций выбора объектов.
var acSelectionSetOptions = new PromptSelectionOptions
{
AllowDuplicates = false,
RejectObjectsOnLockedLayers = true,
//SingleOnly = true,
MessageForAdding = msg
};
// Выбор объектов
var acSelectionSetPrompt = acDocEd.GetSelection(acSelectionSetOptions, acSelectionFilterObject);
if (acSelectionSetPrompt.Status == PromptStatus.OK)
{
var acSelectionSet = acSelectionSetPrompt.Value;
//MessageBox.Show("Количество выбранных объектов = " + acSelectionSet.Count.ToString(), myCommands.msgBoxCaption_acVolume);
// ReSharper disable once LoopCanBeConvertedToQuery
//Перебираем объекты и определяем количество наименований объемов, а так же количество пикетов для посчета объемов
foreach (SelectedObject acSelectedObject in acSelectionSet)
{
if (acSelectedObject != null)
{
Entity acEnt = acTrans.GetObject(acSelectedObject.ObjectId, OpenMode.ForWrite) as Entity;
if (acEnt != null)
{
BlockReference objBlockReference = (BlockReference)acEnt;
if (objBlockReference.Layer.Contains("acVlm_")) // проверяем, принадлежит ли выбранный блок к нужному слою
{
ObjectId btrObjectId = acDocDbBlockTable[objBlockReference.Name]; //получаем ObjectId определения блока по имени его вхождения (objBlockReference.Name)
BlockTableRecord objBlockTableRecord = (BlockTableRecord)btrObjectId.GetObject(OpenMode.ForRead); //Конвертируем объект в определние блока objBlockTableRecord
//определяем количество таблиц с валидными пикетами
foreach (ObjectId objObjectId in objBlockReference.AttributeCollection) //для каждого объекта в коллекции атрибутов objBlockReference.AttributeCollection
{
AttributeReference objAttributeReference = (AttributeReference)acTrans.GetObject(objObjectId, OpenMode.ForRead); //конвертируем объект в AttributeReference
if (objAttributeReference != null)
{
if (objAttributeReference.Tag == "ПК" & ConvertStringToDouble(objAttributeReference.TextString) >= 0) // для каждого атрибута с Тэгом="ПК" и значением >= 0
{
if (!globalPKsAndObjectIds.ContainsKey(ConvertStringToDouble(objAttributeReference.TextString.Trim())))
{
globalPKsAndObjectIds.Add(ConvertStringToDouble(objAttributeReference.TextString.Trim()), btrObjectId);
}
else
{
MessageBox.Show(
"Обнаружены таблицы объемов с одиниковым значением ПК.\nВозможны ошибки в подсчете объемов.\nУдалите дублирующиеся таблицы.",
"acVolume", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
}
//MessageBox.Show("BlockReference.Name: " + objBlockReference.Name + "\nПК = " + objAttributeReference.TextString);
}
}
}
foreach (ObjectId objObjectIdInBtr in objBlockTableRecord) //перебираем объекты в определении блока
{
try //ловим таблицу
{
Table objTable = (Table)objObjectIdInBtr.GetObject(OpenMode.ForRead);
for (int rowIndex = 1; rowIndex < objTable.Rows.Count; rowIndex++)
{
string volumeName = objTable.Cells[rowIndex, 0].TextString.Trim();
string volumeUnit = objTable.Cells[rowIndex, 1].TextString.Trim();
if (!globalVolumesNamesAndUnits.ContainsKey(volumeName))
{
globalVolumesNamesAndUnits.Add(volumeName, volumeUnit);
}
}
//MessageBox.Show(objTable.Cells[0, 0].TextString);
}
catch
{ //throw;
}
//try //ловим атрибут
//{
// AttributeDefinition objAttributeDefinition = (AttributeDefinition)objObjectIdInBTR.GetObject(OpenMode.ForRead);
// //MessageBox.Show(objAttributeDefinition.Tag);
//}
//catch
//{ //throw;
//}
}
}
}
}
}
// определяем количество строк и столбцов в string[,] globalVolumesTable - будующей попикетной ведомости
int globalRowCount = 2 + (globalPKsAndObjectIds.Count - 1) * 2 + 1 + 1; // Заголовок + (Количество ПК - 1)*2 + строка с последним ПК + строка суммы
int globalColumnCount = 2 + globalVolumesNamesAndUnits.Count * 2; // (столбцы ПК и Длина участка) + столбцы собъемами * 2
string[,] globalVolumesTable = new string[globalRowCount, globalColumnCount];
//Заполняем заголовки и ПК в string[,] globalVolumesTable - будующей попикетной ведомости
globalVolumesTable[0, 0] = "ПК+";
globalVolumesTable[0, 1] = "Длина участка, м";
globalVolumesTable[globalRowCount - 1, 0] = "ВСЕГО:";
//Заполняем наименования объемов и единицы измерения
for (int i = 0; i < globalVolumesNamesAndUnits.Count; i++)
{
globalVolumesTable[0, 2 + i * 2] = globalVolumesNamesAndUnits.ElementAt(i).Key;
globalVolumesTable[1, 2 + i * 2] = globalVolumesNamesAndUnits.ElementAt(i).Value;
switch (globalVolumesNamesAndUnits.ElementAt(i).Value)
{
case "м":
globalVolumesTable[1, 2 + i * 2 + 1] = "м2";
break;
case "м2":
globalVolumesTable[1, 2 + i * 2 + 1] = "м3";
break;
}
}
//Сортируем ПК в порядке убывания
globalPKsAndObjectIds = globalPKsAndObjectIds.OrderBy(pair => pair.Key).ToDictionary(pair => pair.Key, pair => pair.Value);
// Заполняем пикеты
for (int i = 0; i < globalPKsAndObjectIds.Count; i++)
{
globalVolumesTable[2 + i * 2, 0] = Convert.ToString(Math.Round(globalPKsAndObjectIds.ElementAt(i).Key, 2), CultureInfo.InvariantCulture);
}
//Получаем из Dictionary globalVolumesNamesAndUnits список List<string> globalVolumesNames
List<string> globalVolumesNames = globalVolumesNamesAndUnits.Select(itm => itm.Key).ToList();
//List<double> globalPKs = globalPKsAndObjectIds.Select(itm => itm.Key).ToList();
List<ObjectId> globalObjectIds = globalPKsAndObjectIds.Select(itm => itm.Value).ToList();
//Перебираем таблицы и добавляем объемы в string[,] globalVolumesTable
for (int i = 0; i < globalPKsAndObjectIds.Count; i++)
{
ObjectId btrObjectId = globalPKsAndObjectIds.ElementAt(i).Value; //получаем ObjectId
BlockTableRecord objBlockTableRecord =
(BlockTableRecord)btrObjectId.GetObject(OpenMode.ForRead);
//Конвертируем объект в определние блока objBlockTableRecord
foreach (ObjectId objObjectIdInBtr in objBlockTableRecord) //перебираем объекты в определении блока
{
try //ловим таблицу
{
Table objTable = (Table)objObjectIdInBtr.GetObject(OpenMode.ForRead);
for (int rowIndex = 1; rowIndex < objTable.Rows.Count; rowIndex++)
{
string volumeName = objTable.Cells[rowIndex, 0].TextString.Trim();
if (globalVolumesNames.Contains(volumeName) & globalPKsAndObjectIds.ContainsValue(btrObjectId))
{
int volumeColumn = 2 + globalVolumesNames.IndexOf(volumeName) * 2;
int volumeRow = 2 + globalObjectIds.IndexOf(btrObjectId) * 2;
globalVolumesTable[volumeRow, volumeColumn] = objTable.Cells[rowIndex, 2].Value.ToString();
}
}
//MessageBox.Show(objTable.Cells[0, 0].TextString);
}
catch
{
// ignored }
}
}
}
//считаем расстояния для предпросмотра в DataGrid
for (int rowIndex = 3; rowIndex < globalVolumesTable.GetLength(0) - 2; rowIndex = rowIndex + 2)
{
double nextItem = ConvertStringToDouble(globalVolumesTable[rowIndex + 1, 0]);
double previousItem = ConvertStringToDouble(globalVolumesTable[rowIndex - 1, 0]);
double lengthItem = nextItem - previousItem;
globalVolumesTable[rowIndex, 1] = Convert.ToString(Math.Round(lengthItem, 2), CultureInfo.InvariantCulture);
}
//считаем объемы между поперечниками для предпросмотра в DataGrid
for (int columnIndex = 3; columnIndex < globalVolumesTable.GetLength(1); columnIndex = columnIndex + 2)
{
for (int rowIndex = 3; rowIndex < globalVolumesTable.GetLength(0) - 2; rowIndex = rowIndex + 2)
{
double nextItem = ConvertStringToDouble(globalVolumesTable[rowIndex + 1, columnIndex - 1]);
double previousItem = ConvertStringToDouble(globalVolumesTable[rowIndex - 1, columnIndex - 1]);
double volume = (nextItem + previousItem) / 2.0d * ConvertStringToDouble(globalVolumesTable[rowIndex, 1]);
globalVolumesTable[rowIndex, columnIndex] = Convert.ToString(Math.Round(volume, 2), CultureInfo.InvariantCulture);
}
}
//считаем итоги
for (int columnIndex = 3; columnIndex < globalVolumesTable.GetLength(1); columnIndex = columnIndex + 2)
{
double columnVolume = 0.0d;
for (int rowIndex = 3; rowIndex < globalVolumesTable.GetLength(0) - 2; rowIndex = rowIndex + 2)
{
columnVolume = columnVolume + ConvertStringToDouble(globalVolumesTable[rowIndex, columnIndex]);
}
globalVolumesTable[globalVolumesTable.GetLength(0) - 1, columnIndex] = Convert.ToString(Math.Round(columnVolume, 2), CultureInfo.InvariantCulture);
}
//Отладочные сообщения
//MessageBox.Show("Выбрано блоков " + acSelectionSet.Count + ".\nИз них таблиц с пикетажем " + globalPKsAndObjectIds.Count);
//string str1 = "Перечень ПК и ObjectIds:\n";
//for (int i = 0; i < globalPKsAndObjectIds.Count; i++)
//{
// str1 = str1 + "ПК " + globalPKsAndObjectIds.ElementAt(i).Key + ", " + "ObjectId: " + globalPKsAndObjectIds.ElementAt(i).Value + "\r";
//}
//MessageBox.Show(str1);
//string str = "Перечень наименований объемов:\n";
//for (int i = 0; i < globalVolumesNamesAndUnits.Count; i++)
//{
// str = str + globalVolumesNamesAndUnits.ElementAt(i).Key + ", " + globalVolumesNamesAndUnits.ElementAt(i).Value + "\r";
//}
//MessageBox.Show(str);
//AcVolShowGlobalvolumesForm();
//Заполнение DataGrid
//DataGridFilling(globalVolumesTable, _globalVolumesForm.dataGridView1);
//Экспорт в Excel
ExportToExcel(globalVolumesTable);
}
acTrans.Commit();
}
}
AcVolShowForm();
}
private static string SelectPk(string msg) //Указание ПК поперечного профиля
{
DBText acDbText = new DBText();
Document acDoc = Application.DocumentManager.MdiActiveDocument; //Текущий документ.
Editor acDocEd = acDoc.Editor; // Editor текущего документа.
Database acDocDb = acDoc.Database; // Database текущего документа.
using (Transaction acTrans = acDocDb.TransactionManager.StartTransaction()) // Начало Транзакции.
{
ReturnIfNullOrEmpty:
// Создание TypedValue array для определение параметров фильтра.
var acTypedValueArray = new TypedValue[1];
acTypedValueArray.SetValue(new TypedValue((int)DxfCode.Start, "TEXT"), 0); // Параметр фильтра под номером 0.
// Assign the filter criteria to a SelectionFilter object
var acSelectionFilterObject = new SelectionFilter(acTypedValueArray);
// Задание опций выбора объектов.
var acSelectionSetOptions = new PromptSelectionOptions
{
AllowDuplicates = false,
RejectObjectsOnLockedLayers = true,
SingleOnly = true,
MessageForAdding = msg
};
// Выбор объектов
var acSelectionSetPrompt = acDocEd.GetSelection(acSelectionSetOptions, acSelectionFilterObject);
if (acSelectionSetPrompt.Status == PromptStatus.OK)
{
var acSelectionSet = acSelectionSetPrompt.Value;
foreach (SelectedObject acSelectedObject in acSelectionSet)
{
if (acSelectedObject != null)
{
var acEnt = acTrans.GetObject(acSelectedObject.ObjectId, OpenMode.ForWrite) as Entity;
if (acEnt != null)
{
acDbText = (DBText)acEnt;
}
}
}
}
if (acSelectionSetPrompt.Status == PromptStatus.Error)
{
MessageBox.Show("ПК не выбран, повторите попытку!", myCommands.msgBoxCaption_acVolume, MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
goto ReturnIfNullOrEmpty;
}
if (acSelectionSetPrompt.Status == PromptStatus.Cancel)
{
//MessageBox.Show("Статус Cancel");
//MessageBox.Show("Выбор пикета отменен!\nТаблица объемов не будет привязана к пикету и не будет учитываться при экспорте объемов в Excel.", "acVolume", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
acTrans.Commit();
return "-1";
}
acTrans.Commit();
}
//MessageBox.Show("acDBText = " + acDBText.TextString.Trim());
return acDbText.TextString.Trim();
}
public static decimal[] CommandAcVol() // Выбор объектов и возврат массива объемов согласно списку слоев в listBoxLayers
{
try
{
Document acDoc = Application.DocumentManager.MdiActiveDocument; //Текущий документ.
Editor acDocEd = acDoc.Editor; // Editor текущего документа.
Database acDocDb = acDoc.Database; // Database текущего документа.
//int layersCount = _form.listBoxLayers.Items.Count;
decimal[] decVolumesArray = new decimal[_form.listBoxLayers.Items.Count];
using (acDoc.LockDocument()) // блокировка документа
{
using (Transaction acTrans = acDocDb.TransactionManager.StartTransaction()) // Начало Транзакции.
{
// Создание TypedValue array для определение параметров фильтра.
var acTypedValueArray = new TypedValue[2];
acTypedValueArray.SetValue(new TypedValue((int)DxfCode.Start, "*POLYLINE"), 0); // Параметр фильтра под номером 0.
acTypedValueArray.SetValue(new TypedValue((int)DxfCode.LayerName, "acVlm_*"), 1); // Параметр фильтра под номером 1.
// Assign the filter criteria to a SelectionFilter object
var acSelectionFilterObject = new SelectionFilter(acTypedValueArray);
// Задание опций выбора объектов.
var acSelectionSetOptions = new PromptSelectionOptions
{
AllowDuplicates = false,
RejectObjectsOnLockedLayers = true,
MessageForAdding = "Выберите контуры для подсчета объемов:"
};
var acSelectionSetPrompt = acDocEd.GetSelection(acSelectionSetOptions, acSelectionFilterObject);
if (acSelectionSetPrompt.Status == PromptStatus.OK)
{
var acSelectionSet = acSelectionSetPrompt.Value;
//int polylineCount = 0;
double sclFactor = 0.0;
switch (_form.comboBoxScale.SelectedIndex)
{
case 0:
sclFactor = 10.0;
break;
case 1:
sclFactor = 5.0;
break;
}
foreach (SelectedObject acSelectedObject in acSelectionSet)
{
if (acSelectedObject != null)
{
var acEnt = acTrans.GetObject(acSelectedObject.ObjectId, OpenMode.ForWrite) as Entity;
if (acEnt != null)
{
var acPolyLine = (Polyline)acEnt;
for (int layerNumber = 0; layerNumber < _form.listBoxLayers.Items.Count; layerNumber++)
{
string layerPostfix = "";
switch ((string)_form.listBoxLayersUnits.Items[layerNumber])
{
case "м2":
layerPostfix = "_msrA";
break;
case "м":
layerPostfix = "_msrL";
break;
}
if (acPolyLine.Layer == "acVlm_" + _form.listBoxLayers.Items[layerNumber] + layerPostfix)
{
if ((string)_form.listBoxLayersUnits.Items[layerNumber] == "м2")
{
decVolumesArray[layerNumber] = decVolumesArray[layerNumber] + (decimal)(acPolyLine.Area / (sclFactor * sclFactor));
}
if ((string)_form.listBoxLayersUnits.Items[layerNumber] == "м")
{
decVolumesArray[layerNumber] = decVolumesArray[layerNumber] + (decimal)(acPolyLine.Length / sclFactor);
}
}
}
}
}
}
}
else
{
acTrans.Abort();
AcVolShowForm();
return null;
}
acTrans.Commit();
return decVolumesArray;
}
}
}
catch (NullReferenceException)
{
return null;
}
}
//获取圈选的楼房
public static List<Building> getCircleBuildings()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
List<Building> buildings;
if (currentSolutionIndex == -1)
{
System.Windows.Forms.MessageBox.Show("请先新建解决方案!");
return null ;
}
try
{
//设置过滤器
TypedValue[] tvs = new TypedValue[] {
new TypedValue((int)DxfCode.Operator,"<and"),
new TypedValue((int)DxfCode.LayerName,"our_outline_layer"),
new TypedValue((int)DxfCode.Operator,"and>")
};
SelectionFilter sf = new SelectionFilter(tvs);
//让用户进行圈画选择
PromptSelectionResult psr = ed.GetSelection(sf);
if (psr.Status != PromptStatus.OK)
{
ed.WriteMessage("Action releasd");
return null;
}
else
{
if (psr.Value == null)
return null;
Database db = doc.Database;
Transaction tr = db.TransactionManager.StartTransaction();
//获得所选的objectId的集合
ObjectId[] objectIds = psr.Value.GetObjectIds();
ed.WriteMessage(">>>", psr.Value.Count);
buildings = new List<Building>();
using (DocumentLock docLock = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.LockDocument())
{
Color currColor = getNextColor();
foreach (ObjectId oId in objectIds)
{
if (HeatSourceLayoutApp.buildings.ContainsKey(oId))
{
Building bui = HeatSourceLayoutApp.buildings[oId];
buildings.Add(bui);
}
//改变选中线段的颜色
Entity ent = (Entity)tr.GetObject(oId, OpenMode.ForRead);
ent.UpgradeOpen();
ent.Color = currColor;
//保存颜色信息
saveColorInfo(oId, currColor);
//记录修改过的颜色的信息
changedEntityList.Add(oId);
}
//生成地区
//District dt = new District();
//dt.Buildings = buildings;
//加入solution
Solution sl = HeatSource.HeatSourceLayoutApp.currentSolution;
if (sl != null)
{
//sl.Districts.Add(dt);
}
tr.Commit();
}
}
return buildings;
}
catch (System.Exception exc)
{
ed.WriteMessage("Exception" + exc.ToString());
return null;
}
}
/// <summary>
/// Загружает в объект свойства всех слоев проекта с привязанными
/// к ним фигурами типа: точка, отрезок и окружность.
/// </summary>
private void Load()
{
// Обнуляем коллекцию слоев.
Layers = new ObservableCollection<Layer>();
// Получаем текущий документ, доступ к командной строке и БД.
Document doc = AcadAS.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Database db = doc.Database;
// Начинаем транзакцию.
using (Transaction tr = db.TransactionManager.StartTransaction())
{
// Получаем таблицу слоев документа.
LayerTable lt = (LayerTable)tr.GetObject(db.LayerTableId, OpenMode.ForRead);
// Добавляем в нашу коллекцию все слои с требуемыми параметрами.
foreach (ObjectId ltrId in lt)
{
LayerTableRecord ltr = (LayerTableRecord)tr.GetObject(ltrId, OpenMode.ForRead);
Layers.Add(new Layer(ltr));
}
// Получаем список фигур (точка, отрезок и окружность) каждого слоя,
// и сохраняем требуемыме параметры фигур в коллекции каждого слоя.
foreach (var layer in Layers)
{
// Обновляем предствление пользователя.
if (Layers[0] == layer)
{
_selectedLayer = layer;
OnPropertyChanged("SelectedLayer");
}
// Задание параметров фильтра.
TypedValue[] filterlist = new TypedValue[8];
filterlist[0] = new TypedValue((int)DxfCode.Operator, "<AND");
filterlist[1] = new TypedValue((int)DxfCode.LayerName, layer.Name);
filterlist[2] = new TypedValue((int)DxfCode.Operator, "<OR");
filterlist[3] = new TypedValue((int)DxfCode.Start, "POINT");
filterlist[4] = new TypedValue((int)DxfCode.Start, "LINE");
filterlist[5] = new TypedValue((int)DxfCode.Start, "CIRCLE");
filterlist[6] = new TypedValue((int)DxfCode.Operator, "OR>");
filterlist[7] = new TypedValue((int)DxfCode.Operator, "AND>");
// Создаем фильтр.
SelectionFilter filter = new SelectionFilter(filterlist);
// пытаемся получить ссылки на объекты с учетом фильтра
PromptSelectionResult selRes = ed.SelectAll(filter);
// Получаем массив ID объектов.
if (selRes.Value != null)
{
ObjectId[] ids = selRes.Value.GetObjectIds();
foreach (ObjectId id in ids)
{
// Приводим каждый из них к типу Entity.
Entity entity = (Entity)tr.GetObject(id, OpenMode.ForRead);
// Классифицируем по группам.
if (entity.GetType() == typeof(AcadDS.DBPoint))
{
layer.Points.Add(new Model.Point(entity as AcadDS.DBPoint));
}
else if (entity.GetType() == typeof(AcadDS.Line))
{
layer.Lines.Add(new Model.Line(entity as AcadDS.Line));
}
else if (entity.GetType() == typeof(AcadDS.Circle))
{
layer.Circles.Add(new Model.Circle(entity as AcadDS.Circle));
}
}
}
}
tr.Commit();
}
}
/// <summary>
/// Un metodo de selección que busca un elemento por un punto
/// </summary>
/// <param name="center">El centro del punto a buscar</param>
/// <param name="filter">El filtro de selección</param>
/// <param name="objIds">Los ids encontrados en el área</param>
/// <param name="crossing">Selección por crossing, otro caso window</param>
/// <returns>El metodo de selección</returns>
public Boolean SelectByPoint(Point3d center, SelectionFilter filter, out ObjectIdCollection objIds, Boolean crossing = true)
{
objIds = new ObjectIdCollection();
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;
Polygon2D pol = new Polygon2D(15, center, 1);
PromptSelectionResult res =
crossing ? ed.SelectCrossingPolygon(pol.Geometry, filter) : ed.SelectWindowPolygon(pol.Geometry, filter);
if (res.Status == PromptStatus.OK)
objIds = new ObjectIdCollection(res.Value.GetObjectIds());
return objIds.Count > 0;
}
public void ConvertTable()
{
List<DwgLine> linelst = new List<DwgLine>();
List<TableText> LstTableText = new List<TableText>();
List<DwgLine> UniqueLineLSt = new List<DwgLine>();
List<TableText> UniqueTableText = new List<TableText>();
linelst.Clear();
LstTableText.Clear();
//Создание фильтров выборки элементов с экрана
TypedValue[] FilterLine = new TypedValue[9];
FilterLine.SetValue(new TypedValue((int)DxfCode.Operator, "<or"), 0);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "Line"), 1);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "POLYLINE"), 2);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "LWPOLYLINE"), 3);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "2DPOPYLINE"), 4);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "3DPOLYLINE"), 5);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "MText"), 6);
FilterLine.SetValue(new TypedValue((int)DxfCode.Start, "Text"), 7);
FilterLine.SetValue(new TypedValue((int)DxfCode.Operator, "or>"), 8);
SelectionFilter filter = new SelectionFilter(FilterLine);
PromptSelectionResult result;
result = ed.GetSelection(filter);
if (result.Status == PromptStatus.OK)
{
ed.WriteMessage("После проверки статуса выбора");
using (Transaction trs = dwg.TransactionManager.StartTransaction())
{
try
{
ObjectId[] objects = result.Value.GetObjectIds();
foreach (ObjectId ObjId in objects)
{
DBObject obj = trs.GetObject(ObjId, OpenMode.ForRead);
Entity ent = obj as Entity;
if (ent.GetType() == typeof(acLine))
{
acLine acl = (acLine)ent;
linelst.Add(new DwgLine((int)acl.StartPoint.X, (int)acl.StartPoint.Y, (int)acl.EndPoint.X, (int)acl.EndPoint.Y));
}
else if (ent.GetType() == typeof(Polyline2d))
{
Polyline2d pl2d = (Polyline2d)ent;
linelst.Add(new DwgLine((int)pl2d.StartPoint.X, (int)pl2d.StartPoint.Y, (int)pl2d.EndPoint.X, (int)pl2d.EndPoint.Y));
}
else if (ent.GetType() == typeof(Polyline3d))
{
Polyline3d pl3d = (Polyline3d)ent;
linelst.Add(new DwgLine((int)pl3d.StartPoint.X, (int)pl3d.StartPoint.Y, (int)pl3d.EndPoint.X, (int)pl3d.EndPoint.Y));
}
else if (ent.GetType() == typeof(Polyline))
{
Polyline pl = (Polyline)ent;
if (pl.NumberOfVertices > 2)
{
for (int i = 0; i <= pl.NumberOfVertices - 2; i++)
{
var PlSegment = pl.GetLineSegmentAt(i);
linelst.Add(new DwgLine((int)PlSegment.StartPoint.X, (int)PlSegment.StartPoint.Y, (int)PlSegment.EndPoint.X, (int)PlSegment.EndPoint.Y));
}
}
else
{
linelst.Add(new DwgLine((int)pl.StartPoint.X, (int)pl.StartPoint.Y, (int)pl.EndPoint.X, (int)pl.EndPoint.Y));
}
}
else if (ent.GetType() == typeof(MText))
{
MText mtx = (MText)ent;
LstTableText.Add(new TableText(mtx.Text, (int)mtx.Location.X, (int)mtx.Location.Y));
}
else if (ent.GetType() == typeof(DBText))
{
DBText dbtxt = (DBText)ent;
LstTableText.Add(new TableText(dbtxt.TextString, (int)dbtxt.Position.X, (int)dbtxt.Position.Y));
}
else
{
ed.WriteMessage("Выбраны неверные типы данных");
}
}
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
ed.WriteMessage(ex.Message);
trs.Abort();
}
UniqueLineLSt = linelst.Distinct().ToList();
UniqueTableText = LstTableText.Distinct().ToList();
GetListOfLine(UniqueLineLSt);
trs.Commit();
}
CreateTable(UniqueLineLSt, UniqueTableText);
}
}
public void List()
{
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;
try
{
PromptSelectionOptions Opts = new PromptSelectionOptions();
TypedValue[] filList = new TypedValue[1];
//Build a filter list so that only block references are selected
filList[0] = new TypedValue((int)DxfCode.Start, "INSERT");
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult res = ed.GetSelection(Opts, filter);
//Do nothing if selection is unsuccessful
if (res.Status != PromptStatus.OK)
return;
Autodesk.AutoCAD.EditorInput.SelectionSet SS = res.Value;
ObjectId[] idArray;
idArray = SS.GetObjectIds();
string[] saEmployeeList = new string[4];
//collect all employee details in saEmployeeList array
foreach (ObjectId employeeId in idArray)
{
ListEmployee(employeeId, ref saEmployeeList);
//Print employee details to the command line
foreach (string employeeDetail in saEmployeeList)
{
ed.WriteMessage(employeeDetail);
}
//separator
ed.WriteMessage("----------------------" + "\r\n");
}
}
catch (System.Exception ex)
{
ed.WriteMessage("Error Listing Employees: " + ex.Message);
}
}
public void aa()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Database db = doc.Database;
//setting the settings for the selection filter - we want only lines filtered
TypedValue[] acTypeValAr = new TypedValue[1]
{
new TypedValue((int)DxfCode.Start , "Line")
};
// instantiating the selection filter and getting the selection result
SelectionFilter sf = new SelectionFilter(acTypeValAr);
PromptSelectionOptions psoAngledLines = new PromptSelectionOptions();
psoAngledLines.MessageForAdding = "Please select rough area where angled lines exist";
PromptSelectionResult psrAngledLines = ed.GetSelection(psoAngledLines, sf);
//if the lines are above a certain angle then put it into an objectIDCollect
if (psrAngledLines.Status == PromptStatus.OK)
{
using (Transaction tr = db.TransactionManager.StartTransaction() )
{
ObjectIdCollection filteredLines = new ObjectIdCollection();
BlockTable bt = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord btr = tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForRead) as BlockTableRecord;
foreach (SelectedObject so in psrAngledLines.Value)
{
Line ln = tr.GetObject(so.ObjectId, OpenMode.ForWrite) as Line;
if (ln != null)
{
try
{
//if it's a small line then delete asap.
if (ln.Length < 0.2)
{ ln.Erase(true); }
else
{
{
if ((ln.Angle < (((Math.PI) / 4) + ((Math.PI) / 12)) && ln.Angle > (((Math.PI) / 4) - ((Math.PI) / 12))) ||
(ln.Angle < (((Math.PI) * 3 / 4) + ((Math.PI) / 12)) && ln.Angle > (((Math.PI) * 3 / 4) - ((Math.PI) / 12))) ||
(ln.Angle < (((Math.PI) * 5 / 4) + ((Math.PI) / 12)) && ln.Angle > (((Math.PI) * 5 / 4) - ((Math.PI) / 12))) ||
(ln.Angle < (((Math.PI) * 7 / 4) + ((Math.PI) / 12)) && ln.Angle > (((Math.PI) * 7 / 4) - ((Math.PI) / 12))))
// if it meets those conditions then erase
{
filteredLines.Add(ln.ObjectId);
ln.Erase(true);
}
} //end else statement
} //if erased
}
catch
{
doc.Editor.WriteMessage("\nLine already deleted, or perhaps some other type of error") ;
}
}//end if ln!= null
}//end foreach
tr.Commit();
}//end using transaction
TypedValue[] acTypeValAr1 = new TypedValue[2]
{
new TypedValue((int)DxfCode.Start , "MTEXT"),
new TypedValue((int)DxfCode.Text , "*"),
};
SelectionFilter sf1 = new SelectionFilter(acTypeValAr1);
psoAngledLines.MessageForAdding = "Please select rough area where angled lines exist";
psrAngledLines = ed.GetSelection(psoAngledLines, sf1);
//TypedValue[] acTypeValAr1 = new TypedValue[4];
//acTypeValAr1.SetValue(new TypedValue((int)DxfCode.Operator, "<or"), 0);
//acTypeValAr1.SetValue(new TypedValue((int)DxfCode.Color, 5), 1);
//acTypeValAr1.SetValue(new TypedValue((int)DxfCode.Color, 162), 2);
//acTypeValAr1.SetValue(new TypedValue((int)DxfCode.Operator, "or>"), 3);
//SelectionFilter sf1 = new SelectionFilter(acTypeValAr1);
//PromptSelectionResult colourDelete = ed.SelectAll(sf1);
//using (Transaction tr = doc.TransactionManager.StartTransaction())
//{
// foreach (Entity en in colourDelete.Value)
// {
// Entity ent = tr.GetObject(en.ObjectId, OpenMode.ForWrite) as Entity;
// ent.Erase();
// }
//}
//using (Transaction tr = doc.TransactionManager.StartTransaction())
//{
// BlockTable bt = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
// //BlockTableRecord btr = tr.GetObject( bt[] );
//}
//ed.WriteMessage("there are {0} of the filtered lines here", filteredLines.Count);
}
}
public void List()
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
try
{
PromptSelectionOptions Opts = new PromptSelectionOptions();
//Build a filter list so that only block references are selected
TypedValue[] filList = { new TypedValue((int)DxfCode.Start, "INSERT") };
SelectionFilter filter = new SelectionFilter(filList);
PromptSelectionResult res = ed.GetSelection(Opts, filter);
//Do nothing if selection is unsuccessful
if (res.Status != PromptStatus.OK)
return;
Autodesk.AutoCAD.EditorInput.SelectionSet SS = res.Value;
ObjectId[] idArray = SS.GetObjectIds();
//List the selection set
EmployeeCount(idArray);
}
catch
{
ed.WriteMessage("Error in Listing Employees");
}
}
public ObjectIdCollection GetEntitiesOnLayer(string layerName)
{
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
TypedValue[] tvs = new TypedValue[1] { new TypedValue((int)DxfCode.LayerName, layerName) };
SelectionFilter sf = new SelectionFilter(tvs);
PromptSelectionResult psr = ed.SelectAll(sf);
if (psr.Status == PromptStatus.OK)
return new ObjectIdCollection(psr.Value.GetObjectIds());
else return new ObjectIdCollection();
}
// Works!! MUST CHECK if something is selected - if not, then return null please for goddsakes!!
public static SelectionSet GetSS(SelectionFilter sf)
{
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
//clear the current selection
ObjectId[] idarrayEmpty = new ObjectId[0];
ed.SetImpliedSelection(idarrayEmpty);
PromptSelectionOptions pso = new PromptSelectionOptions();
pso.MessageForAdding = "\nSelect block(s)";
PromptSelectionResult psr = ed.GetSelection(pso, sf);
return psr.Value;
}
/// <summary>
/// Pапрос выбора блоков
/// </summary>
/// <param name="msg">Строка запроса</param>
/// <exception cref="Exception">Отменено пользователем.</exception>
/// <returns>Список выбранных блоков</returns>
public static List<ObjectId> SelectBlRefs(this Editor ed, string msg)
{
var filList = new TypedValue[1] { new TypedValue((int)DxfCode.Start, "INSERT") };
SelectionFilter filter = new SelectionFilter(filList);
var selOpt = new PromptSelectionOptions();
selOpt.MessageForAdding = msg;
var selRes = ed.GetSelection(selOpt, filter);
if (selRes.Status == PromptStatus.OK)
{
return selRes.Value.GetObjectIds().ToList();
}
else
{
throw new Exception("\nОтменено пользователем");
}
}
public static void DeleteEntitiesOnLayer(string layerName, SelectionFilter sf)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptSelectionResult psr = ed.SelectAll(sf);
if (psr.Status == PromptStatus.OK)
{
ObjectIdCollection ids = new ObjectIdCollection(psr.Value.GetObjectIds());
using (DocumentLock docLock = doc.LockDocument())
{
using (Transaction tr = db.TransactionManager.StartTransaction())
{
foreach (ObjectId id in ids)
{
Entity en = tr.GetObject(id, OpenMode.ForWrite) as Entity;
if (en!=null)
{
en.Erase();
}
}
tr.Commit();
}
}
}
}
/// <summary>
/// Prompts the user for a selection of blocks, returns a list of block references
/// </summary>
/// <param name="tr"></param>
/// <returns></returns>
private IEnumerable<BlockReference> PromptForBlock(Transaction tr)
{
var blocks = new List<BlockReference>();
var filList = new[] {new TypedValue((int) DxfCode.Start, "INSERT")};
var filter = new SelectionFilter(filList);
var opts = new PromptSelectionOptions {MessageForAdding = "Select block references: "};
PromptSelectionResult res = _ed.GetSelection(opts, filter);
if (res.Status == PromptStatus.OK)
{
SelectionSet selSet = res.Value;
ObjectId[] idArray = selSet.GetObjectIds();
blocks.AddRange(
idArray.Select(blkId => (BlockReference) tr.GetObject(blkId, OpenMode.ForWrite)).Where(
blkRef => ValidateBlock(blkRef, tr)));
}
return blocks;
}
private PromptSelectionResult GetHeightMarks()
{
string databaseBlockName = GetDatabaseBlockName();
TypedValue[] typedValue = new TypedValue[] { new TypedValue((int)DxfCode.BlockName, databaseBlockName) };
SelectionFilter filter = new SelectionFilter(typedValue);
PromptSelectionResult selectedMarks = editor.GetSelection(filter);
return selectedMarks;
}
private static SelectionFilter GetSSFilter()
{
// selection filter. We filter by the name of the panel and also we want only lines
TypedValue[] acTypeValAr = new TypedValue[4] {new TypedValue((int)DxfCode.Operator, "<or"),
new TypedValue((int)DxfCode.LayerName, "PANELS"),
new TypedValue((int)DxfCode.LayerName, "0"),
new TypedValue((int)DxfCode.Operator, "or>")
};
// the instantiating of a selection filter which selects on certain layers and which selects only lines
SelectionFilter sf = new SelectionFilter(acTypeValAr);
return sf;
}