public static void TxTransmitTestTone([Values(20)] double offsetFreq_Mhz)
{
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Calculate Test Tone And Generate
Console.WriteLine("Tone Offset (Mhz): " + offsetFreq_Mhz);
double testFreq_MHz = freqTxLo_MHz + offsetFreq_Mhz;
double offsetFreq_Hz = offsetFreq_Mhz * 1000000;
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, -15);
//Config and Enable Mykonos with Test Specific Settings
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOn();
Link.Disconnect();
//Connect to Signal Analyser
//The span is fixed to 50MHz
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 50, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(1, freqTxLo_MHz + offsetFreq_Mhz); //Fundemental Amplitued Marker
double fundAmp_dB = Double.Parse(pxa.GetMarker(1), style);
NUnit.Framework.Assert.Greater(fundAmp_dB, 5);
}
public static void TestPXA()
{
double pkAmp = 0;
double pkFreq = 0;
double[] data = new double[1001];
Console.WriteLine("--PXA TEST STARTED--");
SA_AgilentPXA pxa = new SA_AgilentPXA(PXAAddress);
Console.WriteLine(PXAAddress);
Console.WriteLine(pxa.Identify());
pxa.SetFreq(2600);
pxa.SetCenterFreq(10);
pxa.SetFreqSpan(100);
pxa.SetRefLevel(10);
pxa.SetAtten(20);
pxa.SetRBW_VBW(100, 1);
pxa.SetCenterSpan(10, 100, 0);
pxa.MeasPeakPower(ref pkAmp, ref pkFreq);
Console.WriteLine("Peak Amplitude = " + pkAmp);
Console.WriteLine("Peak Frequency = " + pkFreq);
pxa.SetMarker(1, 0);
Console.WriteLine(pxa.GetMarker(1));
pxa.SetDetector(SA_AgilentPXA.DetectorTypes.NORM);
pxa.GetPlotData(out data);
Console.WriteLine("X Y");
Console.WriteLine(" ");
for (int i = 0; i < data.Length; i++)
{
Console.WriteLine("{0} {1}", i, data[i]);
}
pxa.Close();
Console.WriteLine("--PXA TEST FINISHED--");
}
public static void CableTest()
{
//TEST PARAMETER DEFINITIONS
int[] amplitudes = new int[1] {
-20
}; //Hard coded values for amplitude settings
SwpParamStruct param = new SwpParamStruct(2000, 4000, amplitudes[0], 12); //Hard coded values, Initialize param structure
string[] seriesName = new string[amplitudes.Length];
double[] data = new double[param.numSteps];
double[] freqAxis = new double[param.numSteps];
double[,] freqAmplitudeData = new double[param.numSteps, amplitudes.Length + 1]; //Always a 2D array
//MEASUREMENT EQUIPMENT SETUP
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
///ESG Setup
SG_AgilentESG esg = new SG_AgilentESG(ESGAddress);
Console.WriteLine(esg.Identify());
//PXA Setup
Console.WriteLine("--PXA TEST STARTED--");
SA_AgilentPXA pxa = new SA_AgilentPXA(PXAAddress);
Console.WriteLine("--CABLE TEST STARTED--");
for (int j = 0; j < amplitudes.Length; j++)
{
param.amplitude = amplitudes[j];
string seriesLabel = "Input Amplitude " + amplitudes[j] + "dBm";
seriesName[j] = seriesLabel;
//set init values on ESG
esg.SetFrequency(param.freqMin);
esg.SetAmplitude(param.amplitude);
esg.SetRfOutput(true);
for (int i = 0; i < param.numSteps; i++)
{
double test_freq = param.freqMin + i * (param.freqMax - param.freqMin) / param.numSteps;
esg.SetFrequency(test_freq);
pxa.SetCenterSpan(test_freq, 100, 0); //MHz
pxa.SetAtten(10);
pxa.SetRefLevel(-10);
pxa.SetMarker(1, test_freq); //Sets marker to frequency of interest
pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
data[i] = Double.Parse(pxa.GetMarker(1), style); //Rewrite this... it's verbose
freqAxis[i] = test_freq;
freqAmplitudeData[i, 0] = test_freq;
freqAmplitudeData[i, j + 1] = Double.Parse(pxa.GetMarker(1), style);
}
}
// PRINT OUTPUT FILES
string path = @"..\..\..\TestResults\CableTest"; //Sends output data to the TestOutputs folder
//Output Data to a text file
//Output Charts to a pdf file
var doc1 = new Document();
string[] chartLabels = new string[] { "Received ESG Amplitude on PXA (Cable Test)",
"ESG Frequency (MHz)",
"Amplitude (dBm)",
"ESG Amplitude (dBm): " + amplitudes[0] };
string[] headerStrings = new string[] { "Cable Test Output Graph",
"Mykonos API Regression Testing Development",
Helper.GetTimestamp() };
iTextSharp.text.Image[] container = new iTextSharp.text.Image[1];
container[0] = Helper.MakeChartObject(freqAmplitudeData, chartLabels, path + ".pdf");
Helper.AddAllChartsToPdf(container, path + ".pdf", headerStrings);
//Open Result pdf
System.Diagnostics.Process.Start(path + ".pdf");
}
public static void TxLOLInitCalCheck([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel)
{
//Setup the calibrations
settings.calMask = (UInt32)(Mykonos.CALMASK.TX_BB_FILTER) |
(UInt32)(Mykonos.CALMASK.ADC_TUNER) |
(UInt32)(Mykonos.CALMASK.TIA_3DB_CORNER) |
(UInt32)(Mykonos.CALMASK.DC_OFFSET) |
(UInt32)(Mykonos.CALMASK.TX_ATTENUATION_DELAY) |
(UInt32)(Mykonos.CALMASK.RX_GAIN_DELAY) |
(UInt32)(Mykonos.CALMASK.FLASH_CAL) |
(UInt32)(Mykonos.CALMASK.PATH_DELAY) |
//(UInt32)(Mykonos.CALMASK.TX_LO_LEAKAGE_INTERNAL) |
(UInt32)(Mykonos.CALMASK.TX_QEC_INIT) |
(UInt32)(Mykonos.CALMASK.LOOPBACK_RX_LO_DELAY) |
(UInt32)(Mykonos.CALMASK.LOOPBACK_RX_RX_QEC_INIT) |
(UInt32)(Mykonos.CALMASK.RX_LO_DELAY) |
(UInt32)(Mykonos.CALMASK.RX_QEC_INIT);
TestSetup.TestSetupInit(settings);
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
int backoff = 0;
string boardfreq = settings.testBoard;
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Define variables for storing Fundamental Amplitue, LoLeakage and ImageAmplitude
double[] fundAmp = new double[2];
double[] LoLeakageAmp = new double[2];
//Connect to Signal Analyser
//The span is fixed to 100MHz
//Set Marker 2 as LO leakage marker
//Note: this may need to be set depending on profile.
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 100, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(2, freqTxLo_MHz);
//Config and Enable Mykonos with Test Specific Settings
//Use Default Test Constructor
//Start Calibration
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
System.Threading.Thread.Sleep(500);
Link.Mykonos.radioOn();
Link.Disconnect();
//Generate Tone and Measure Image
double offsetFreq_Mhz = 10;
double testFreq_MHz = freqTxLo_MHz + offsetFreq_Mhz;
double offsetFreq_Hz = offsetFreq_Mhz * 1000000;
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Take Measurements from PXA
pxa.SetMarker(1, testFreq_MHz); //Fundamental amplitue marker
System.Threading.Thread.Sleep(500);
fundAmp[0] = Double.Parse(pxa.GetMarker(1), style);
LoLeakageAmp[0] = Double.Parse(pxa.GetMarker(2), style);
Console.WriteLine("No Init LO Leakage" + ": FundAmp: " + fundAmp[0] + ", LO Leakage: " + LoLeakageAmp[0]);
//Re-Initialise with TX QEC init Cal
settings.calMask = settings.calMask | (UInt32)(Mykonos.CALMASK.TX_LO_LEAKAGE_INTERNAL);
TestSetup.TestSetupInit(settings);
//Turn Radio Off and
Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOff();
System.Threading.Thread.Sleep(500);
System.Threading.Thread.Sleep(500);
Link.Disconnect();
//Config and Enable Mykonos with Test Specific Settings
Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOn();
Link.Disconnect();
//Generate Tone and Measure Image
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Take Measurements from PXA
System.Threading.Thread.Sleep(500);
fundAmp[1] = Double.Parse(pxa.GetMarker(1), style);
LoLeakageAmp[1] = Double.Parse(pxa.GetMarker(2), style);
Console.WriteLine("Init LO Leakage" + ": FundAmp: " + fundAmp[1] + ", LO Leakage: " + LoLeakageAmp[1] + ", " + (fundAmp[1] - LoLeakageAmp[1]) + ", ");
Console.WriteLine("Lo Leakage Diff: " + (LoLeakageAmp[0] - LoLeakageAmp[1]));
// Check that Image has reduced
NUnit.Framework.Assert.Less(LoLeakageAmp[1], LoLeakageAmp[0]);
}
public static void TxPassbandSweepTxNCO([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel, [Values(2500, 2500)] double deltaF_kHz)
{
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
double spanMhz;
int numSteps = 0;
double txIqDataRate_MHz = 0;
double freqTxLo_MHz = 0;
double profileBandwidth_MHz = 0;
double toneOffsetFreq_Mhz = 0;
double offsetFreq_Hz = 0;
double testRfFreq_MHz = 0;
try
{
//Enable the Transmitter Path
Link.Mykonos.radioOn();
//Profile Information
txIqDataRate_MHz = (double)(settings.txProfileData.IqRate_kHz) / 1000;
freqTxLo_MHz = (double)(settings.txPllLoFreq_Hz) / 1000000;
profileBandwidth_MHz = (double)settings.txProfileData.PrimarySigBw_Hz;
numSteps = (int)(txIqDataRate_MHz / (deltaF_kHz / 1000.0));
spanMhz = txIqDataRate_MHz;
//Define Data Array for storing Fundamental Amplitue, LoLeakage and ImageAmplitude
double[,] fundAmpXY = new double[numSteps, 2];
double[,] loLeakageXY = new double[numSteps, 2];
double[,] imageAmpXY = new double[numSteps, 2];
pxa.SysPreset();
pxa.SetRBW_VBW(30, 30);
pxa.SetCenterSpan(freqTxLo_MHz, 200, 0);
pxa.SetAtten(20);
pxa.SetMarker(2, freqTxLo_MHz); //LO leakage marker
double peakAmp_dBm = 0;
double peakFreq_Mhz = 0;
double deltaF = txIqDataRate_MHz / numSteps;
double fundAmp = 0;
double loLeakage = 0;
double imageAmp = 0;
Console.Write(numSteps + 1);
for (int i = 0; (i < numSteps); i++)
{
toneOffsetFreq_Mhz = (-0.5 * txIqDataRate_MHz) + ((deltaF_kHz / 1000.0) * i);
offsetFreq_Hz = toneOffsetFreq_Mhz * 1000000;
testRfFreq_MHz = freqTxLo_MHz + offsetFreq_Hz / 1000000;
Link.Mykonos.enableTxNco(1, (int)(toneOffsetFreq_Mhz * 1000), (int)(toneOffsetFreq_Mhz * 1000));
System.Threading.Thread.Sleep(500);
//pxa.HoldAverage(10);
pxa.MeasPeakPower(ref peakAmp_dBm, ref peakFreq_Mhz);
//Set PXA Markers
/* for this to work, NCO freq set must be rastered to its actual frequency in the chip */
//pxa.SetMarker(3, freqTxLo_MHz - (freqTxLo_MHz - peakFreq_Mhz)); //Image marker
//pxa.SetMarker(1, testRfFreq_MHz); //Fundamental amplitue marker
//fundAmp = Double.Parse(pxa.GetMarker(1), style);
//loLeakage = Double.Parse(pxa.GetMarker(2), style);
//imageAmp = Double.Parse(pxa.GetMarker(3), style);
//TODO: Marker 3 does not always sit on the image, sometimes its off a bin or so and measures incorrectly.
pxa.SetMarker(3, (freqTxLo_MHz - ((peakFreq_Mhz / 1000000.0) - freqTxLo_MHz))); //Image marker
fundAmp = peakAmp_dBm;
loLeakage = Double.Parse(pxa.GetMarker(2), style);
imageAmp = Double.Parse(pxa.GetMarker(3), style);
fundAmpXY[i, 0] = toneOffsetFreq_Mhz;
fundAmpXY[i, 1] = fundAmp;
loLeakageXY[i, 0] = toneOffsetFreq_Mhz;
loLeakageXY[i, 1] = loLeakage;
imageAmpXY[i, 0] = toneOffsetFreq_Mhz;
imageAmpXY[i, 1] = imageAmp;
if ((toneOffsetFreq_Mhz > -1) && (toneOffsetFreq_Mhz < 1))
{
Console.WriteLine("Bypass:"******"Fundamental Amplitude (dBm)" + i + ": " + toneOffsetFreq_Mhz + ": " + fundAmp);
Console.WriteLine("LO Leakage (dBm)" + toneOffsetFreq_Mhz + ": " + loLeakage);
Console.WriteLine("Image Amplitude (dBm)" + toneOffsetFreq_Mhz + ": " + imageAmp);
Console.WriteLine("Image Amplitude (dBc)" + toneOffsetFreq_Mhz + ": " + (fundAmp - imageAmp));
#endif
}
Link.Disconnect();
//Graph Data and Save in PDF Form
var doc1 = new Document();
string path = TxRfTests.ResPath + "TxPassbandSweepTxNco";
string[] pcbInfo;
iTextSharp.text.Image[] container = new iTextSharp.text.Image[3];
string[] fundAmpLabels = new string[] { "Fundamental Amplitude Versus Offset Tone Frequency (from LO)",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
string[] loLeakageLabels = new string[] { "LO Leakage Versus Offset Tone Frequency",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
string[] imageAmpLabels = new string[] { "Image Amplitude Versus Offset Tone Frequency",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
pcbInfo = Helper.PcbInfo();
Console.Write(fundAmpXY[48, 0]);
container[0] = Helper.MakeChartObject(fundAmpXY, fundAmpLabels, path);
container[1] = Helper.MakeChartObject(loLeakageXY, loLeakageLabels, path);
container[2] = Helper.MakeChartObject(imageAmpXY, imageAmpLabels, path);
Helper.AddAllChartsToPdf(container, path + ".pdf", pcbInfo);
//Open Result PDF
System.Diagnostics.Process.Start(path + ".pdf");
//Check Min Max Fund Amplitudes are within +/-0.5db of each other.
var MinFundAmp = System.Linq.Enumerable.Range(15, 30).Select(i => fundAmpXY[i, 1]).Min();
var MaxFundAmp = System.Linq.Enumerable.Range(15, 30).Select(i => fundAmpXY[i, 1]).Max();
Console.WriteLine("MinFundAmp: " + MinFundAmp);
Console.WriteLine("MaxFundAmp: " + MaxFundAmp);
Console.WriteLine("MaxDiffFundAmp: " + (MaxFundAmp - MinFundAmp));
NUnit.Framework.Assert.IsTrue((MaxFundAmp - MinFundAmp) < 1.0);
}
catch (Exception e)
{
Console.WriteLine(e);
throw;
}
}
public static void TxAttenuationSweep([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel)
{
int atten = 0;
int backoff = 0;
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Configure Tone Generator
//10MHz offset tone generation
double offsetFreq_Hz = 10000000;
double[,] fundAmpXY = new double[42, 2];
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Connect to Signal Analyser
//The span is fixed to 50MHz
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 50, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(1, freqTxLo_MHz + 10); //Fundemental Amplitued Marker
pxa.SetMarker(2, freqTxLo_MHz); //LO Leakage Marker
pxa.SetMarker(3, freqTxLo_MHz - (offsetFreq_Hz / 1000000)); //Image Amplitude marker
//Config and Enable Mykonos with Test Specific Settings
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.radioOn();
//Test Sequence
//Iterate Thru Tx Attenuation Settings
//Measure Amplitude of the fundamental
//TODO: 0 to 41950
int step = 0;
double fundAmp_dB = 0;
double minAttnVal_dB = 0;
double maxAttnVal_dB = 41.95;
for (double attenVal_dB = minAttnVal_dB; (attenVal_dB < maxAttnVal_dB); attenVal_dB += 1)
{
try
{
if (channel == Mykonos.TXCHANNEL.TX1)
{
Link.Mykonos.setTx1Attenuation(attenVal_dB);
}
if (channel == Mykonos.TXCHANNEL.TX2)
{
Link.Mykonos.setTx2Attenuation(attenVal_dB);
}
}
catch (Exception e)
{
Console.WriteLine(e);
break;
}
pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
fundAmp_dB = Double.Parse(pxa.GetMarker(1), style);
fundAmpXY[step, 1] = fundAmp_dB;
fundAmpXY[step, 0] = attenVal_dB;
step++;
#if WR_RES_TO_CONSOLE
Console.WriteLine("Fundamental Amplitude, Attenuation Value " + attenVal_dB + ": " + fundAmp_dB);
#endif
}
Link.Disconnect();
#if WR_RES_TO_PDF
//Graph Data and Save in PDF Form
var doc1 = new Document();
string path = TxRfTests.ResPath + "TxAttenuationSweep";
string[] pcbInfo;
iTextSharp.text.Image[] container = new iTextSharp.text.Image[1];
string[] fundAmpLabels = new string[] { "Fundamental Amplitude Versus Offset Tone Frequency (from LO)",
"setTxAtten Argument",
"Amplitude (dBm)",
"Trace Amplitude" };
pcbInfo = Helper.PcbInfo((settings.txPllLoFreq_Hz / 1000000.0).ToString(), (settings.rxPllLoFreq_Hz / 1000000.0).ToString(), settings.mykSettings.txProfileName, settings.mykSettings.rxProfileName, backoff.ToString(), atten.ToString());
container[0] = Helper.MakeChartObject(fundAmpXY, fundAmpLabels, path);
TxRfTests instance = new TxRfTests();
Helper.AddAllChartsToPdf(container, path + ".pdf", pcbInfo);
//Open Result PDF
System.Diagnostics.Process.Start(path + ".pdf");
#endif
}
public static void TxPassbandSweep([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel)
{
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
int atten = 0;
int backoff = 0;
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Define Test Parameters Based on Profile Info & Lo Frequency
double SwpMinFreq = freqTxLo_MHz - (1.1 * (profileBandwidth_MHz / 2));
double SwpMaxFreq = freqTxLo_MHz + (1.1 * (profileBandwidth_MHz / 2));
double SwpSigAmp = -40;
int SwpNumSteps = 50;
SwpParamStruct param = new SwpParamStruct(SwpMinFreq, SwpMaxFreq, SwpSigAmp, SwpNumSteps);
double SwpStepSz = (param.freqMax - param.freqMin) / param.numSteps;
Console.WriteLine("SwpMinFreq (MHz): " + SwpMinFreq);
Console.WriteLine("SwpMaxMax (MHz): " + SwpMaxFreq);
Console.WriteLine("SwpSigAmp (MHz): " + SwpSigAmp);
//Define Data Array for storing Fundamental Amplitue, LoLeakage and ImageAmplitude
double[,] fundAmpXY = new double[param.numSteps + 1, 2];
double[,] loLeakageXY = new double[param.numSteps + 1, 2];
double[,] imageAmpXY = new double[param.numSteps + 1, 2];
//Connect to Signal Analyser
//The span is fixed to 100MHz
//Set Marker 2 as LO leakage marker
//Note: this may need to be set depending on profile.
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 200, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(2, freqTxLo_MHz);
//Config and Enable Mykonos with Test Specific Settings
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOn();
Link.Disconnect();
#if WR_RES_TO_CONSOLE
Console.WriteLine(" OffSet Frequency input (MHz):" +
"Fundamental Amplitude (dBm), " +
"LO Leakage (dBm)," +
"Image Amplitude (dBm),");
#endif
//Test Sequence
//Sweep Thru Passband
for (int i = 0; (i <= param.numSteps); i++)
{
//Calculate Test Tone And Generate
double offsetFreq_Mhz = param.freqMin + (i * SwpStepSz) - (freqTxLo_MHz);
double testFreq_MHz = freqTxLo_MHz + offsetFreq_Mhz;
double fundAmp, loLeakage, imageAmp;
double offsetFreq_Hz = offsetFreq_Mhz * 1000000;
if (offsetFreq_Hz == 0)
{
fundAmpXY[i, 0] = offsetFreq_Mhz;
fundAmpXY[i, 1] = fundAmpXY[i - 1, 1];
loLeakageXY[i, 0] = offsetFreq_Mhz;
loLeakageXY[i, 1] = loLeakageXY[i - 1, 1];
imageAmpXY[i, 0] = offsetFreq_Mhz;
imageAmpXY[i, 1] = imageAmpXY[i - 1, 1];
continue;
}
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Take Measurements from PXA
pxa.SetMarker(3, freqTxLo_MHz - (offsetFreq_Hz / 1000000)); //Image marker
pxa.SetMarker(1, testFreq_MHz); //Fundamental amplitue marker
//pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
fundAmp = Double.Parse(pxa.GetMarker(1), style);
loLeakage = Double.Parse(pxa.GetMarker(2), style);
imageAmp = Double.Parse(pxa.GetMarker(3), style);
fundAmpXY[i, 0] = offsetFreq_Mhz;
fundAmpXY[i, 1] = fundAmp;
loLeakageXY[i, 0] = offsetFreq_Mhz;
loLeakageXY[i, 1] = loLeakage;
imageAmpXY[i, 0] = offsetFreq_Mhz;
imageAmpXY[i, 1] = imageAmp;
#if WR_RES_TO_CONSOLE //Optional printout for text based readout in test output window
Console.WriteLine(offsetFreq_Mhz + ": " + fundAmp + ", " + loLeakage + ", " + imageAmp + ", " + (fundAmp - imageAmp) + ", ");
#endif
}
#if WR_RES_TO_PDF
//Graph Data and Save in PDF Form
var doc1 = new Document();
string path = TxRfTests.ResPath + "TxPassbandSweep";
TxRfTests instance = new TxRfTests();
string[] pcbInfo;
iTextSharp.text.Image[] container = new iTextSharp.text.Image[3];
string[] fundAmpLabels = new string[] { "Fundamental Amplitude Versus Offset Tone Frequency (from LO)",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
string[] loLeakageLabels = new string[] { "LO Leakage Versus Offset Tone Frequency",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
string[] imageAmpLabels = new string[] { "Image Amplitude Versus Offset Tone Frequency",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
pcbInfo = Helper.PcbInfo((settings.txPllLoFreq_Hz / 1000000.0).ToString(), (settings.rxPllLoFreq_Hz / 1000000.0).ToString(), settings.mykSettings.txProfileName, settings.mykSettings.rxProfileName, backoff.ToString(), atten.ToString());
// pcbInfo = Helper.PcbInfo();
container[0] = Helper.MakeChartObject(fundAmpXY, fundAmpLabels, path);
container[1] = Helper.MakeChartObject(loLeakageXY, loLeakageLabels, path);
container[2] = Helper.MakeChartObject(imageAmpXY, imageAmpLabels, path);
Helper.AddAllChartsToPdf(container, path + ".pdf", pcbInfo);
//Open Result PDF
System.Diagnostics.Process.Start(path + ".pdf");
#endif
#if WR_RES_TO_TXT
// Write data to txt file
using (System.IO.StreamWriter file = new System.IO.StreamWriter(path + ".txt"))
{
file.WriteLine("Sample, Frequency MHz, Fundamental Power(dBm), LOL(dBFS), Image Power(dBFS),");
for (int i = 0; i < param.numSteps; i++)
{
file.WriteLine(i + "," + fundAmpXY[i, 0].ToString() + "," + fundAmpXY[i, 1].ToString() + "," + loLeakageXY[i, 1].ToString() + "," + imageAmpXY[i, 1].ToString());
}
}
#endif
//Check Min Max Fund Amplitudes are within 0.5db of each other.
var MinFundAmp = System.Linq.Enumerable.Range(0, param.numSteps).Select(i => fundAmpXY[i, 1]).Min();
var MaxFundAmp = System.Linq.Enumerable.Range(0, param.numSteps).Select(i => fundAmpXY[i, 1]).Max();
Console.WriteLine("MinFundAmp: " + MinFundAmp);
Console.WriteLine("MaxFundAmp: " + MaxFundAmp);
Console.WriteLine("MaxDiffFundAmp: " + (MaxFundAmp - MinFundAmp));
NUnit.Framework.Assert.IsTrue((MaxFundAmp - MinFundAmp) < 1.0);
}
public static void QECHarmonicSweep([Values(Mykonos.TXCHANNEL.TX1, Mykonos.TXCHANNEL.TX2)] Mykonos.TXCHANNEL channel)
{
InitCalSweepTests obj = new InitCalSweepTests();
obj.QECTestsInit();
//Retrieve Profile Information, samplingFreq_Hz, ProfileBW, LO Frequency Information
double[] profileInfo = new double[3];
double backoff = -15;
int atten = 0;
profileInfo[0] = settings.txProfileData.IqRate_kHz;
profileInfo[1] = settings.txPllLoFreq_Hz;
profileInfo[2] = settings.txProfileData.PrimarySigBw_Hz;
double txIqDataRate_kHz = profileInfo[0];
double profileBandwidth_MHz = profileInfo[2] / 1000000;
Console.WriteLine("IQ Data Rate (kHz): " + txIqDataRate_kHz);
Console.WriteLine("Profile Bandwdith (MHz): " + profileBandwidth_MHz);
double freqTxLo_MHz = profileInfo[1] / 1000000;
Console.WriteLine("Tx LO Frequency (MHz): " + freqTxLo_MHz);
//Define Test Parameters Based on Profile Info & Lo Frequency
double SwpMinFreq = freqTxLo_MHz - (2 * (profileBandwidth_MHz / 2));
double SwpMaxFreq = freqTxLo_MHz + (2 * (profileBandwidth_MHz / 2));
double SwpSigAmp = -40;
int SwpNumSteps = 200;
SwpParamStruct param = new SwpParamStruct(SwpMinFreq, SwpMaxFreq, SwpSigAmp, SwpNumSteps);
double SwpStepSz = (param.freqMax - param.freqMin) / param.numSteps;
Console.WriteLine("SwpMinFreq (MHz): " + SwpMinFreq);
Console.WriteLine("SwpMaxMax (MHz): " + SwpMaxFreq);
Console.WriteLine("SwpSigAmp (MHz): " + SwpSigAmp);
//Define Data Array for storing Fundamental Amplitue, LoLeakage and ImageAmplitude
//double[,] fundAmpXY = new double[param.numSteps, 2];
double[,] harmonicAmpnoCal = new double[param.numSteps + 1, 4];
double[,] harmonicAmpCal = new double[param.numSteps + 1, 4];
double[,] loLeakageXYcal = new double[param.numSteps + 1, 2];
double[,] loLeakageXYdif = new double[param.numSteps + 1, 2];
//double[,] imageAmpXY = new double[param.numSteps, 2];
//Connect to Signal Generator
//The span is fixed to 100MHz
//Set Marker 2 as LO leakage marker
//Note: this may need to be set depending on profile.
NumberStyles style = NumberStyles.AllowExponent | NumberStyles.Number;
SA_AgilentPXA pxa = new SA_AgilentPXA(measEquipment.PXAAddress);
pxa.SetCenterSpan(freqTxLo_MHz, 200, 0);
pxa.SetAtten(20);
pxa.SetRefLevel(10);
pxa.SetMarker(2, freqTxLo_MHz);
//Config and Enable Mykonos with Test Specific Settings
AdiCommandServerClient Link = AdiCommandServerClient.Instance;
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOn();
Link.Disconnect();
#if WR_RES_TO_CONSOLE
Console.WriteLine(" OffSet Frequency input (MHz):" +
"Image Amplitude (dBm)");
#endif
//Test Sequence
//Sweep Thru Passband
for (int i = 0; (i <= param.numSteps); i++)
{
//Calculate Test Tone And Generate
double offsetFreq_Mhz = param.freqMin + (i * SwpStepSz) - (freqTxLo_MHz);
double testFreq_MHz = freqTxLo_MHz + offsetFreq_Mhz;
double harmonicAmp;
double offsetFreq_Hz = offsetFreq_Mhz * 1000000;
if (offsetFreq_Hz == 0)
{
harmonicAmpnoCal[i, 0] = offsetFreq_Mhz;
harmonicAmpnoCal[i, 1] = harmonicAmpnoCal[i - 1, 1];
harmonicAmpnoCal[i, 2] = harmonicAmpnoCal[i - 1, 2];
harmonicAmpnoCal[i, 3] = harmonicAmpnoCal[i - 1, 3];
continue;
}
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
//Take Measurements from PXA
pxa.SetMarker(1, freqTxLo_MHz + (offsetFreq_Hz / 1000000));
pxa.SetMarker(2, freqTxLo_MHz + 2 * (offsetFreq_Hz / 1000000));
pxa.SetMarker(3, freqTxLo_MHz + 3 * (offsetFreq_Hz / 1000000));
//pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
harmonicAmpnoCal[i, 0] = offsetFreq_Mhz;
harmonicAmp = Double.Parse(pxa.GetMarker(1), style);
harmonicAmpnoCal[i, 1] = harmonicAmp;
harmonicAmp = Double.Parse(pxa.GetMarker(2), style);
harmonicAmpnoCal[i, 2] = harmonicAmp;
harmonicAmp = Double.Parse(pxa.GetMarker(3), style);
harmonicAmpnoCal[i, 3] = harmonicAmp;
#if WR_RES_TO_CONSOLE //Optional printout for text based readout in test output window
Console.WriteLine(offsetFreq_Mhz + ": " + harmonicAmp + ", ");
#endif
}
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.radioOff();
Link.Disconnect();
obj.AllCalsInit();
Link.hw.Connect(TestSetupConfig.ipAddr, TestSetupConfig.port);
Link.Mykonos.setTx1Attenuation(0);
Link.Mykonos.radioOn();
Link.Disconnect();
for (int i = 0; (i <= param.numSteps); i++)
{
//Calculate Test Tone And Generate
double offsetFreq_Mhz = param.freqMin + (i * SwpStepSz) - (freqTxLo_MHz);
double testFreq_MHz = freqTxLo_MHz + offsetFreq_Mhz;
double offsetFreq_Hz = offsetFreq_Mhz * 1000000;
double harmonicAmp;
if (offsetFreq_Hz == 0)
{
harmonicAmpCal[i, 0] = offsetFreq_Mhz;
harmonicAmpCal[i, 1] = harmonicAmpCal[i - 1, 1];
harmonicAmpCal[i, 2] = harmonicAmpCal[i - 1, 2];
harmonicAmpCal[i, 3] = harmonicAmpCal[i - 1, 3];
//loLeakageXY[i, 3] = loLeakageXY[i, 1] - loLeakageXY[i, 2];
continue;
}
Helper.GenerateTxTone(Mykonos.TXCHANNEL.TX1_TX2, profileInfo, offsetFreq_Hz, backoff);
pxa.SetMarker(1, freqTxLo_MHz + (offsetFreq_Hz / 1000000));
pxa.SetMarker(2, freqTxLo_MHz + 2 * (offsetFreq_Hz / 1000000));
pxa.SetMarker(3, freqTxLo_MHz + 3 * (offsetFreq_Hz / 1000000));
//pxa.HoldAverage();
System.Threading.Thread.Sleep(500);
harmonicAmpCal[i, 0] = offsetFreq_Mhz;
harmonicAmp = Double.Parse(pxa.GetMarker(1), style);
harmonicAmpCal[i, 1] = harmonicAmp;
harmonicAmp = Double.Parse(pxa.GetMarker(2), style);
harmonicAmpCal[i, 2] = harmonicAmp;
harmonicAmp = Double.Parse(pxa.GetMarker(3), style);
harmonicAmpCal[i, 3] = harmonicAmp;
}
#if WR_RES_TO_PDF
//Graph Data and Save in PDF Form
var doc1 = new Document();
string path = TxRfTests.ResPath + "QECInitSweep";
TxRfTests instance = new TxRfTests();
string[] pcbInfo;
iTextSharp.text.Image[] container = new iTextSharp.text.Image[2];
string[] loLeakageLabels = new string[] { "Harmonic Amplitude Versus Offset Tone Frequency without Calibrations",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"1st Harmonic", "2nd Harmonic", "3rd Harmonic" };
string[] loLeakageLabelscal = new string[] { "Harmonic Amplitude Versus Offset Tone Frequency with Calibrations",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"1st Harmonic", "2nd Harmonic", "3rd Harmonic" };
string[] loLeakageLabelsdif = new string[] { "Image Amplitude Versus Offset Tone Frequency Difference",
"Offset Tone Frequency (MHz)",
"Amplitude (dBm)",
"Trace Amplitude" };
pcbInfo = Helper.PcbInfo((settings.txPllLoFreq_Hz / 1000000000.0).ToString(), (settings.rxPllLoFreq_Hz / 1000000000.0).ToString(), settings.mykSettings.txProfileName, settings.mykSettings.rxProfileName, backoff.ToString(), atten.ToString());
// pcbInfo = Helper.PcbInfo();
//container[0] = Helper.MakeChartObject(fundAmpXY, fundAmpLabels, path);
container[0] = Helper.MakeChartObject(harmonicAmpnoCal, loLeakageLabels, path);
container[1] = Helper.MakeChartObject(harmonicAmpCal, loLeakageLabelscal, path);
//container[1] = Helper.MakeChartObject(loLeakageXYcal, loLeakageLabelscal, path);
//container[2] = Helper.MakeChartObject(loLeakageXYdif, loLeakageLabelsdif, path);
//container[2] = Helper.MakeChartObject(imageAmpXY, imageAmpLabels, path);
Helper.AddAllChartsToPdf(container, path + ".pdf", pcbInfo);
//Open Result PDF
System.Diagnostics.Process.Start(path + ".pdf");
#endif
#if WR_RES_TO_TXT
// Write data to txt file
using (System.IO.StreamWriter file = new System.IO.StreamWriter(path + ".txt"))
{
file.WriteLine("Sample, Frequency MHz, LOL(dBFS) w/o cal, LOL(dBFS) w/ cal");
for (int i = 0; i <= param.numSteps; i++)
{
file.WriteLine(i + "," + harmonicAmpnoCal[i, 0].ToString() + "," + harmonicAmpnoCal[i, 1].ToString() + "," + harmonicAmpnoCal[i, 2].ToString());
}
}
#endif
}