/// <summary>
/// 获取有关时钟芯片WM8510的设置
/// </summary>
/// <param name="freq"></param>
/// <param name="index"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int ClockWM8510Set(int freq, int index, COMMPort usedPort, RichTextBox msg = null)
{
int _return = 0;
switch (index)
{
case 1:
_return = this.ClockWM8510SetFreq(freq, usedPort, msg);
break;
case 2:
_return = this.ClockWM8510GetFreq(freq, usedPort, msg);
break;
case 3:
_return = this.ClockWM8510Reset(usedPort, msg);
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "WM8510的设置操作不合法!\r\n", Color.Red, false);
}
_return = 1;
break;
}
return(_return);
}
/// <summary>
/// 设置通信端口的参数
/// </summary>
private void SetCOMMSerialPortParam()
{
if ((this.m_COMMComboBox.Text != null) && (this.m_COMMComboBox.Items.Count > 0))
{
COMMSerialPortParamForm p = new COMMSerialPortParamForm(this.m_COMMComboBox.Text, this.m_COMMSerialPortParam);
if (p.ShowDialog(this.m_COMMComboBox) != System.Windows.Forms.DialogResult.OK)
{
if (this.m_COMMRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.m_COMMRichTextBox, "通信端口参数配置失败。\r\n", Color.Red, false);
}
}
else
{
this.m_COMMSerialPortParam = ((COMMSerialPortParamForm)p).m_COMMSerialPortParam;
if (this.m_COMMRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.m_COMMRichTextBox, "通信端口参数配置成功。\r\n", Color.Black, false);
}
p.CloseForm();
}
}
}
/// <summary>
/// 设置参数
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
public void COMMSerialPortParam_Click(object sender, EventArgs e)
{
if ((this.m_COMMComboBox.Text != null) && (this.m_COMMComboBox.Items.Count > 0))
{
COMMSerialPortParamForm p = new COMMSerialPortParamForm(this.m_COMMComboBox.Text);
if (p.ShowDialog(this.m_COMMComboBox) != System.Windows.Forms.DialogResult.OK)
{
if (this.m_COMMRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.m_COMMRichTextBox, "通信端口参数配置失败。\r\n", Color.Red, false);
}
return;
}
this.m_COMMSerialPortParam = ((COMMSerialPortParamForm)p).m_COMMSerialPortParam;
if (this.m_COMMRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.m_COMMRichTextBox, "通信端口参数配置成功。\r\n", Color.Black, false);
}
p.CloseForm();
}
}
/// <summary>
/// 复位WM8510
/// </summary>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int ClockWM8510Reset(COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
int _return = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_FREQ_WM8510, (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_RESET_WM8510 };
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 200);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟设备复位成功!\r\n", Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
/// 打印Log数据
/// </summary>
public void PrintfLog(RichTextBox msg = null)
{
if (msg == null)
{
return;
}
if ((this.siteACurrentX100mA.Count == 0) || (this.siteBCurrentX100mA.Count == 0) || (this.siteCCurrentX100mA.Count == 0) || (this.siteDCurrentX100mA.Count == 0))
{
return;
}
string str = "粗略起始频率:" + this.startFreqMHz.ToString("D") + "MHz" + ";有效的SITE数:" + this.siteNum.ToString("D") + "\r\n";
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoWithDateTime(msg, str, Color.Black, false);
}
int i = 0;
//---起始频率
int freqMHz = 0;
string fileLog = "";
for (i = 0; i < this.siteACurrentX100mA.Count; i++)
{
if (i == 0)
{
freqMHz = this.startFreqMHz;
}
else
{
freqMHz += this.stepFreqMHz;
}
str = freqMHz.ToString("D") + ";" + this.siteACurrentX100mA[i].ToString("D") + ";" + this.siteBCurrentX100mA[i].ToString("D") + ";" + this.siteCCurrentX100mA[i].ToString("D") + ";" + this.siteDCurrentX100mA[i].ToString("D") + "\r\n";
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoWithoutDateTime(msg, str, Color.Black, false);
}
fileLog += str;
}
FileFuncTXT txtFile = new FileFuncTXT();
txtFile.WriteToTxtFile("sitemA.txt", fileLog);
}
/// <summary>
///
/// </summary>
/// <param name="index"></param>
/// <param name="freq"></param>
/// <returns></returns>
public virtual int PreFreqYSELSet(int index, int preFreqIndex, PreFreqControl freqControl, COMMPort usedPort, RichTextBox msg = null)
{
int _return = 0;
switch (index)
{
case 1:
_return = this.PreFreqYSELGetFreq(preFreqIndex, freqControl, usedPort, msg);
break;
case 2:
_return = this.PreFreqYSELSetFreq(preFreqIndex, freqControl, usedPort, msg);
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点操作不合法!\r\n", Color.Red, false);
}
_return = 1;
break;
}
return(_return);
}
/// <summary>
/// 设备类型的设置和获取
/// </summary>
/// <param name="index"></param>
/// <param name="deviceType"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int DeviceTypeSet(int index, DeviceTypeControl deviceType, COMMPort usedPort, RichTextBox msg = null)
{
int _return = 0;
switch (index)
{
case 1:
_return = this.DeviceTypeGetDevice(deviceType, usedPort, msg);
break;
case 2:
_return = this.DeviceTypeSetDevice(deviceType, usedPort, msg);
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点操作不合法!\r\n", Color.Red, false);
}
_return = 1;
break;
}
return(_return);
}
/// <summary>
/// 点击按钮事件
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
public virtual void button_Click(object sender, EventArgs e)
{
Button btn = (Button)sender;
btn.Enabled = false;
switch (btn.Name)
{
case "button_initDevice":
if (btn.Text == "打开端口")
{
if (this.usedPort.OpenDevice(this.comboBox_portName.Text, this.usedMsg) == 0)
{
this.pictureBox_portState.Tag = 1;
btn.Text = "关闭端口";
this.pictureBox_portState.Image = Properties.Resources.open;
//---控件不使能
this.ComboBoxPortInit(false);
//---消息显示
if (this.usedMsg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.usedMsg, "端口" + this.comboBox_portName.Text + "打开成功!\r\n", Color.Black, false);
}
}
else
{
this.pictureBox_portState.Tag = 2;
this.pictureBox_portState.Image = Properties.Resources.error;
if (this.usedMsg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.usedMsg, "端口" + this.comboBox_portName.Text + "端口打开失败!\r\n", Color.Red, false);
}
}
}
else if (btn.Text == "关闭端口")
{
if (this.usedPort != null)
{
this.pictureBox_portState.Tag = 3;
this.usedPort.CloseDevice();
btn.Text = "打开端口";
this.pictureBox_portState.Image = Properties.Resources.lost;
//---控件不使能
this.ComboBoxPortInit(true);
//---消息显示
if (this.usedMsg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.usedMsg, "端口" + this.comboBox_portName.Text + "关闭成功!\r\n", Color.Black, false);
}
}
}
else
{
if (this.usedForm != null)
{
MessageBoxPlus.Show(this.usedForm, "端口操作异常！错误操作：" + btn.Text, "错误提示");
}
else
{
MessageBox.Show("端口操作异常！错误操作：" + btn.Text, "错误提示");
}
}
break;
default:
break;
}
btn.Enabled = true;
}
/// <summary>
///
/// </summary>
/// <param name="index"></param>
/// <param name="freq"></param>
/// <returns></returns>
protected virtual int PreFreqYSELSetFreq(int preFreqIndex, PreFreqControl freqControl, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (freqControl == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点的控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, 0, 0, 0, 0, 0 };
int freq1 = 0;
int freq2 = 0;
int freq3 = 0;
int freq4 = 0;
string str = "";
switch (preFreqIndex)
{
case 1:
freq1 = (int)(freqControl.m_PreFreqOne * 100);
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL1_FREQ_SET;
cmd[2] = (byte)(freq1 >> 24);
cmd[3] = (byte)(freq1 >> 16);
cmd[4] = (byte)(freq1 >> 8);
cmd[5] = (byte)(freq1);
str = "预设频率点1设置成功，频率是：" + freqControl.m_PreFreqOne.ToString() + "MHz" + "!\r\n";
break;
case 2:
freq2 = (int)(freqControl.m_PreFreqTwo * 100);
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL2_FREQ_SET;
cmd[2] = (byte)(freq2 >> 24);
cmd[3] = (byte)(freq2 >> 16);
cmd[4] = (byte)(freq2 >> 8);
cmd[5] = (byte)(freq2);
str = "预设频率点2设置成功，频率是：" + freqControl.m_PreFreqTwo.ToString() + "MHz" + "!\r\n";
break;
case 3:
freq3 = (int)(freqControl.m_PreFreqThree * 100);
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL3_FREQ_SET;
cmd[2] = (byte)(freq3 >> 24);
cmd[3] = (byte)(freq3 >> 16);
cmd[4] = (byte)(freq3 >> 8);
cmd[5] = (byte)(freq3);
str = "预设频率点3设置成功，频率是：" + freqControl.m_PreFreqThree.ToString() + "MHz" + "!\r\n";
break;
case 4:
freq4 = (int)(freqControl.m_PreFreqFour * 100);
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL4_FREQ_SET;
cmd[2] = (byte)(freq4 >> 24);
cmd[3] = (byte)(freq4 >> 16);
cmd[4] = (byte)(freq4 >> 8);
cmd[5] = (byte)(freq4);
str = "预设频率点4设置成功，频率是：" + freqControl.m_PreFreqFour.ToString() + "MHz" + "!\r\n";
break;
case 5:
freq1 = (int)(freqControl.m_PreFreqOne * 100);
freq2 = (int)(freqControl.m_PreFreqTwo * 100);
freq3 = (int)(freqControl.m_PreFreqThree * 100);
freq4 = (int)(freqControl.m_PreFreqFour * 100);
cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL_FREQ_SET, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
cmd[2] = (byte)(freq1 >> 24);
cmd[3] = (byte)(freq1 >> 16);
cmd[4] = (byte)(freq1 >> 8);
cmd[5] = (byte)(freq1);
cmd[6] = (byte)(freq2 >> 24);
cmd[7] = (byte)(freq2 >> 16);
cmd[8] = (byte)(freq2 >> 8);
cmd[9] = (byte)(freq2);
cmd[10] = (byte)(freq3 >> 24);
cmd[11] = (byte)(freq3 >> 16);
cmd[12] = (byte)(freq3 >> 8);
cmd[13] = (byte)(freq3);
cmd[14] = (byte)(freq4 >> 24);
cmd[15] = (byte)(freq4 >> 16);
cmd[16] = (byte)(freq4 >> 8);
cmd[17] = (byte)(freq4);
str = "预设频率点1设置成功，频率是：" + freqControl.m_PreFreqOne.ToString() + "MHz" + "!\r\n";
str += "预设频率点2设置成功，频率是：" + freqControl.m_PreFreqTwo.ToString() + "MHz" + "!\r\n";
str += "预设频率点3设置成功，频率是：" + freqControl.m_PreFreqThree.ToString() + "MHz" + "!\r\n";
str += "预设频率点4设置成功，频率是：" + freqControl.m_PreFreqFour.ToString() + "MHz" + "!\r\n";
break;
case 6:
cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL1_FREQ_OUT };
str = "预设频率点1设置输出，频率是：" + freqControl.m_PreFreqOne.ToString() + "MHz" + "!\r\n";
break;
case 7:
cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL2_FREQ_OUT };
str = "预设频率点2设置输出，频率是：" + freqControl.m_PreFreqTwo.ToString() + "MHz" + "!\r\n";
break;
case 8:
cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL3_FREQ_OUT };
str = "预设频率点3设置输出，频率是：" + freqControl.m_PreFreqThree.ToString() + "MHz" + "!\r\n";
break;
case 9:
cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL4_FREQ_OUT };
str = "预设频率点4设置输出，频率是：" + freqControl.m_PreFreqFour.ToString() + "MHz" + "!\r\n";
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点的信息传递错误!\r\n", Color.Red, false);
}
return(3);
}
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率设置成功!\r\n" + str, Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="index"></param>
/// <param name="freq"></param>
/// <returns></returns>
protected virtual int PreFreqYSELGetFreq(int preFreqIndex, PreFreqControl freqControl, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (freqControl == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点的控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_YSEL_FREQ, 0, };
float freq1 = 0;
float freq2 = 0;
float freq3 = 0;
float freq4 = 0;
string str = "";
switch (preFreqIndex)
{
case 1:
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL1_FREQ_GET;
break;
case 2:
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL2_FREQ_GET;
break;
case 3:
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL3_FREQ_GET;
break;
case 4:
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL4_FREQ_GET;
break;
case 5:
cmd[1] = (byte)CLOCKYSELCMD.CMD_RFASK_CMD2_YSEL_FREQ_GET;
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率点的信息传递错误!\r\n", Color.Red, false);
}
return(3);
}
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
switch (preFreqIndex)
{
case 1:
freq1 = res[usedPort.m_COMMPortDataReadIndex + 3];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
freqControl.m_PreFreqOne = (float)(freq1 / 100.00);
str = "预设频率点1读取成功，频率是：" + freqControl.m_PreFreqOne.ToString("0.00") + "MHz" + "!\r\n";
break;
case 2:
freq2 = res[usedPort.m_COMMPortDataReadIndex + 3];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
freqControl.m_PreFreqTwo = (float)(freq2 / 100.00);
str = "预设频率点2读取成功，频率是：" + freqControl.m_PreFreqTwo.ToString("0.00") + "MHz" + "!\r\n";
break;
case 3:
freq3 = res[usedPort.m_COMMPortDataReadIndex + 3];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
freqControl.m_PreFreqThree = (float)(freq3 / 100.00);
str = "预设频率点3读取成功，频率是：" + freqControl.m_PreFreqThree.ToString("0.00") + "MHz" + "!\r\n";
break;
case 4:
freq4 = res[usedPort.m_COMMPortDataReadIndex + 3];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
freqControl.m_PreFreqFour = (float)(freq4 / 100.00);
str = "预设频率点4读取成功，频率是：" + freqControl.m_PreFreqFour.ToString("0.00") + "MHz" + "!\r\n";
break;
case 5:
freq1 = res[usedPort.m_COMMPortDataReadIndex + 3];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
freq1 = ((int)freq1 << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
freqControl.m_PreFreqOne = (float)(freq1 / 100.00);
str = "预设频率点1读取成功，频率是：" + freqControl.m_PreFreqOne.ToString("0.00") + "MHz" + "!\r\n";
freq2 = res[usedPort.m_COMMPortDataReadIndex + 7];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 8];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 9];
freq2 = ((int)freq2 << 8) + res[usedPort.m_COMMPortDataReadIndex + 10];
freqControl.m_PreFreqTwo = (float)(freq2 / 100.00);
str += "预设频率点2读取成功，频率是：" + freqControl.m_PreFreqTwo.ToString("0.00") + "MHz" + "!\r\n";
freq3 = res[usedPort.m_COMMPortDataReadIndex + 11];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 12];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 13];
freq3 = ((int)freq3 << 8) + res[usedPort.m_COMMPortDataReadIndex + 14];
freqControl.m_PreFreqThree = (float)(freq3 / 100.00);
str += "预设频率点3读取成功，频率是：" + freqControl.m_PreFreqThree.ToString("0.00") + "MHz" + "!\r\n";
freq4 = res[usedPort.m_COMMPortDataReadIndex + 15];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 16];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 17];
freq4 = ((int)freq4 << 8) + res[usedPort.m_COMMPortDataReadIndex + 18];
freqControl.m_PreFreqFour = (float)(freq4 / 100.00);
str += "预设频率点4读取成功，频率是：" + freqControl.m_PreFreqFour.ToString("0.00") + "MHz" + "!\r\n";
break;
default:
return(4);
}
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "预设频率读取成功!\r\n" + str, Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="deviceType"></param>
/// <returns></returns>
protected virtual int DeviceTypeGetDevice(DeviceTypeControl deviceType, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceType == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_FREQ_CURRENT, (byte)RFASKFreqCurrentCMD.CMD_RFASK_CMD1_FREQ_CURRENT_DEVICE_GET };
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型参数获取成功!\r\n", Color.Black, false);
}
//---设置设备的类型
if (deviceType.SetDeviceType(res[usedPort.m_COMMPortDataReadIndex + 3]) == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型不能识别!\r\n", Color.Black, false);
}
return(3);
}
_return = res[usedPort.m_COMMPortDataReadIndex + 4];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
//---设置采样电阻的大小
deviceType.m_SampleRes = (float)(_return * 1.0 / 100);
_return = res[usedPort.m_COMMPortDataReadIndex + 6];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 7];
//---获取放大倍数
deviceType.m_AmpTimes = (float)(_return * 1.0);
_return = 0;
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="freqPointIndexCMD"></param>
/// <param name="deviceCurrent"></param>
/// <param name="usedPort"></param>
/// <param name="usedChart"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int FreqCurrentDo(int freqPointIndexCMD, FreqCurrentControl deviceCurrent, COMMPort usedPort, MyChart usedChart, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceCurrent == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { (byte)freqPointIndexCMD, (byte)RFASKFreqCurrentPointCMD.CMD_RFASK_CMD1_FREQ_CURRENT_POINT_DO };
byte[] res = null;
//---将命令写入设备并读取返回的值
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 1000);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流的第" + (freqPointIndexCMD - 3).ToString() + "个点的频率电流扫描!\r\n", Color.Black, false);
//---进行一次频率电流扫描消耗的时间
RichTextBoxPlus.AppendTextInfoWithDateTime(msg, "消耗的时间:" + ((int)usedPort.m_COMMPortUsedTime.Milliseconds).ToString("D") + "ms\r\n", Color.Black, false);
}
this.usedSiteCurrent = new RFASKSiteCurrent();
byte[] siteCurrent = new byte[res.Length - usedPort.m_COMMPortDataReadIndex - 4];
Array.Copy(res, (usedPort.m_COMMPortDataReadIndex + 4), siteCurrent, 0, siteCurrent.Length);
//---获取各个site的电流
this.usedSiteCurrent.Init(res[usedPort.m_COMMPortDataReadIndex + 3], siteCurrent);
this.usedSiteCurrent.Init(res[usedPort.m_COMMPortDataReadIndex + 3], (int)deviceCurrent.m_StepFreq, usedChart);
//---打印Log数据
this.usedSiteCurrent.PrintfLog(msg);
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
/// 获取设备的电流配置参数
/// </summary>
/// <param name="freqPointIndex"></param>
/// <param name="deviceCurrent"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int FreqCurrentGetCurrentParm(int freqPointIndexCMD, FreqCurrentControl deviceCurrent, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceCurrent == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { (byte)freqPointIndexCMD, (byte)RFASKFreqCurrentPointCMD.CMD_RFASK_CMD1_FREQ_CURRENT_POINT_CURRENT_GET };
byte[] res = null;
//---将命令写入设备并读取返回的值
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流的第" + (freqPointIndexCMD - 3).ToString() + "个点的电流参数获取成功!\r\n", Color.Black, false);
}
//---获取起始最大电流
_return = res[usedPort.m_COMMPortDataReadIndex + 3];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
//---刷新起始最大电流
deviceCurrent.m_StartPassMax = (float)(_return * 1.0 / 100);
//---获取起始最小电流
_return = res[usedPort.m_COMMPortDataReadIndex + 5];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
//---刷新起始最小电流
deviceCurrent.m_StartPassMin = (float)(_return * 1.0 / 100);
//---ADC间隔点数
_return = res[usedPort.m_COMMPortDataReadIndex + 7];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 8];
//---刷新ADC间隔点数
deviceCurrent.m_PassSpacePointNum = _return;
//---ADC合格的最大值
_return = res[usedPort.m_COMMPortDataReadIndex + 9];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 10];
//---刷新ADC合格的最大值
deviceCurrent.m_PassSpacePointMax = _return;
//---ADC合格的最小值
_return = res[usedPort.m_COMMPortDataReadIndex + 11];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 12];
//---刷新ADC合格的最小值
deviceCurrent.m_PassSpacePointMin = _return;
//---获取截止最大电流
_return = res[usedPort.m_COMMPortDataReadIndex + 13];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 14];
//---刷新截止最大电流
deviceCurrent.m_StopPassMax = (float)(_return * 1.0 / 100);
//---获取截止最小电流
_return = res[usedPort.m_COMMPortDataReadIndex + 15];
_return = (_return << 8) + res[usedPort.m_COMMPortDataReadIndex + 16];
//---刷新截止最小电流
deviceCurrent.m_StopPassMin = (float)(_return * 1.0 / 100);
//---恢复返回值
_return = 0;
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="index"></param>
/// <param name="freqPointIndex"></param>
/// <param name="deviceFreqCurrent"></param>
/// <param name="usedPort"></param>
/// <param name="usedChart"></param>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int FreqCurrentSet(int index, int freqPointIndex, FreqCurrentControl deviceFreqCurrent, COMMPort usedPort, MyChart usedChart, RichTextBox msg = null)
{
int _return = 0;
int cmd = 0;
//---第几个扫描任务的解析
switch (freqPointIndex)
{
case 1:
cmd = CMD_RFASK_CMD1_FREQ_CURRENT_POINT_ONE;
break;
case 2:
cmd = CMD_RFASK_CMD1_FREQ_CURRENT_POINT_TWO;
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流扫描任务命令不合法!\r\n", Color.Red, false);
}
return(1);
}
//---频率电流扫描执行的操作
switch (index)
{
case 1:
//---获取频率参数
_return = this.FreqCurrentGetFreqParm(cmd, deviceFreqCurrent, usedPort, msg);
break;
case 2:
//---配置频率参数
_return = this.FreqCurrentSetFreqParm(cmd, deviceFreqCurrent, usedPort, msg);
break;
case 3:
//---获取电流参数
_return = this.FreqCurrentGetCurrentParm(cmd, deviceFreqCurrent, usedPort, msg);
break;
case 4:
//---设置电流参数
_return = this.FreqCurrentSetCurrentParm(cmd, deviceFreqCurrent, usedPort, msg);
break;
case 5:
//---执行频率电流扫描
_return = this.FreqCurrentDo(cmd, deviceFreqCurrent, usedPort, usedChart, msg);
break;
default:
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流扫描操作不合法!\r\n", Color.Red, false);
}
_return = 1;
break;
}
return(_return);
}
/// <summary>
/// 读取WM8510输出频率
/// </summary>
/// <param name="freq"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int ClockWM8510GetFreq(float freq, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
int _return = 0;
int getFreq = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_FREQ_WM8510, (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_GET_WM8510 };
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 200);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟频率读取成功!\r\n", Color.Black, false);
}
getFreq = res[usedPort.m_COMMPortDataReadIndex + 3];
getFreq = (getFreq << 8) + res[usedPort.m_COMMPortDataReadIndex + 4];
getFreq = (getFreq << 8) + res[usedPort.m_COMMPortDataReadIndex + 5];
getFreq = (getFreq << 8) + res[usedPort.m_COMMPortDataReadIndex + 6];
//---时钟频率的校验
if (getFreq < freq)
{
if ((freq - getFreq) < 5000)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟频率验证成功!\r\n", Color.Black, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟频率验证失败!\t读取频率是：" + getFreq.ToString() + "Hz\r\n", Color.Red, false);
}
}
}
else
{
if ((getFreq - freq) < 5000)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟频率验证成功!\r\n", Color.Black, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "时钟频率验证失败!\t读取频率是：" + getFreq.ToString() + "Hz\r\n", Color.Red, false);
}
}
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="deviceType"></param>
/// <returns></returns>
protected virtual int DeviceTypeSetDevice(DeviceTypeControl deviceType, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceType == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_FREQ_CURRENT, (byte)RFASKFreqCurrentCMD.CMD_RFASK_CMD1_FREQ_CURRENT_DEVICE_SET, 0x00, 0x00, 0x00, 0x00, 0x00 };
cmd[2] = (byte)deviceType.GetDeviceType(deviceType.m_DeviceType);
if (cmd[2] == 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型无法识别!\r\n", Color.Red, false);
}
return(2);
}
float temp = deviceType.m_SampleRes;
_return = (int)(temp * 100);
cmd[3] = (byte)(_return >> 8);
cmd[4] = (byte)(_return);
temp = deviceType.m_AmpTimes;
_return = (int)(temp * 1);
cmd[5] = (byte)(_return >> 8);
cmd[6] = (byte)(_return);
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "设备类型参数设置成功!\r\n", Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
//========================================================
#region 钮事件
/// <summary>
/// 按钮点击事件处理
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void button_Click(object sender, EventArgs e)
{
string str = sender.ToString();
if (str == "清除")
{
this.richTextBox_msg.Clear();
}
else
{
if (this.usedBootLoader == null)
{
MessageBoxPlus.Show(this, "应用发生配置错误，请重新启动！", "错误提示!", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
Button btn = (Button)sender;
btn.Enabled = false;
DialogResult dgTemp;
int _return = 0;
//---检查那个按钮使用
switch (btn.Name)
{
case "button_openPort":
_return = this.usedBootLoader.OpenDevice(this.comboBox_portName.Text, this.richTextBox_msg);
if (_return == 0)
{
this.button_closePort.Enabled = true;
this.panel_update.Enabled = true;
this.comboBox_portName.Enabled = false;
return;
}
break;
case "button_closePort":
_return = this.usedBootLoader.CloseDevice(this.comboBox_portName.Text, this.richTextBox_msg);
if (_return == 0)
{
this.button_openPort.Enabled = true;
this.panel_update.Enabled = false;
this.comboBox_portName.Enabled = true;
return;
}
break;
case "button_openFirmware":
//---重新初始化打开文件
openFirmwareFile = new OpenFileDialog();
//---过滤文件
openFirmwareFile.AddExtension = true;
openFirmwareFile.DefaultExt = "hex";
openFirmwareFile.Filter = " hex files(*.hex)|*.hex";
openFirmwareFile.FilterIndex = 0;
//---获取文件打开的状态
dgTemp = openFirmwareFile.ShowDialog();
//---判断是否选择固件
if (dgTemp == DialogResult.OK)
{
this.textBox_firmware.Text = openFirmwareFile.FileName;
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.richTextBox_msg, "固件打开成功! \r\n", Color.Black, false);
}
else if (dgTemp == DialogResult.Cancel)
{
this.textBox_firmware.Text = string.Empty;
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.richTextBox_msg, "取消固件打开! \r\n", Color.Black, false);
}
else
{
this.textBox_firmware.Text = string.Empty;
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.richTextBox_msg, "固件打开失败！\r\n", Color.Red, false);
}
break;
case "button_updateFirmware":
if ((this.textBox_firmware.Text == null) || (this.textBox_firmware.Text == string.Empty) || (this.openFirmwareFile.SafeFileNames.Length == 0))
{
//---弹出警告框
MessageBoxPlus.Show(this, "固件文件错误，请重新选择！", "错误提示!", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
else
{
//---弹出警告框
if (DialogResult.OK == MessageBoxPlus.Show(this, "？？？是否确定更新固件!", "更新提示!", MessageBoxButtons.OKCancel, MessageBoxIcon.Question))
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.richTextBox_msg, "取消更新固件！\r\n", Color.Red, false);
}
else
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.richTextBox_msg, "准备更新固件！\r\n", Color.Red, false);
}
}
break;
default:
break;
}
btn.Enabled = true;
}
}
/// <summary>
/// 设置设备的频率配置参数
/// </summary>
/// <param name="freqPointIndex"></param>
/// <param name="deviceFreq"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int FreqCurrentSetFreqParm(int freqPointIndexCMD, FreqCurrentControl deviceFreq, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceFreq == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] {
(byte)freqPointIndexCMD, (byte)RFASKFreqCurrentPointCMD.CMD_RFASK_CMD1_FREQ_CURRENT_POINT_FREQ_SET,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00
};
//---数据填充，起始射频频率
_return = (int)(deviceFreq.m_StartFreq * 100);
cmd[2] = (byte)(_return >> 24);
cmd[3] = (byte)(_return >> 16);
cmd[4] = (byte)(_return >> 8);
cmd[5] = (byte)(_return);
//---数据填充，步进射频频率
_return = (int)(deviceFreq.m_StepFreq * 100);
cmd[6] = (byte)(_return >> 8);
cmd[7] = (byte)(_return);
//---数据填充，步进射频频率
_return = (int)(deviceFreq.m_StepPointNum);
cmd[8] = (byte)(_return >> 8);
cmd[9] = (byte)(_return);
//---回传的命令
byte[] res = null;
//---将命令写入设备并读取返回的值
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流的第" + (freqPointIndexCMD - 3).ToString() + "个点的频率参数设置成功!\r\n", Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
/// 时钟输出通道
/// </summary>
/// <param name="channel"></param>
/// <param name="isOpen"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int ClockWM8510SetChannel(int channel, bool isOpen, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
int _return = 0;
string str = null;
byte[] cmd = new byte[] { CMD_RFASK_CMD1_FREQ_WM8510, 0x00, 0x00 };
switch (channel)
{
case 1:
cmd[1] = (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_CHANNELA_WM8510;
str = "时钟频率A通道输出";
break;
case 2:
cmd[1] = (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_CHANNELB_WM8510;
str = "时钟频率B通道输出";
break;
case 3:
cmd[1] = (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_CHANNELC_WM8510;
str = "时钟频率C通道输出";
break;
case 4:
cmd[1] = (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_CHANNELD_WM8510;
str = "时钟频率D通道输出";
break;
case 5:
cmd[1] = (byte)CLOCKWM8510CMD.CMD_RFASK_CMD2_CHANNELS_WM8510;
str = "时钟频率全通道输出";
break;
default:
return(2);
}
if (isOpen == true)
{
cmd[2] = 0x01;
}
byte[] res = null;
//---将命令写入设备
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 200);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (isOpen == true)
{
str += "打开!\r\n";
}
else
{
str += "关闭!\r\n";
}
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, str, Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
/// 设置设备的电流配置参数
/// </summary>
/// <param name="freqPointIndex"></param>
/// <param name="deviceCurrent"></param>
/// <param name="usedPort"></param>
/// <param name="msg"></param>
/// <returns></returns>
protected virtual int FreqCurrentSetCurrentParm(int freqPointIndexCMD, FreqCurrentControl deviceCurrent, COMMPort usedPort, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
if (deviceCurrent == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流控件传递错误!\r\n", Color.Red, false);
}
return(2);
}
int _return = 0;
byte[] cmd = new byte[] {
(byte)freqPointIndexCMD, (byte)RFASKFreqCurrentPointCMD.CMD_RFASK_CMD1_FREQ_CURRENT_POINT_CURRENT_SET,
0x00, 0x00,
0x00, 0x00,
0x00, 0x00,
0x00, 0x00,
0x00, 0x00,
0x00, 0x00,
0x00, 0x00
};
//---参数设置---起始频率点的电流最大值
_return = (int)(deviceCurrent.m_StartPassMax * 100);
cmd[2] = (byte)(_return >> 8);
cmd[3] = (byte)(_return);
//---参数设置---起始频率点的电流最小值
_return = (int)(deviceCurrent.m_StartPassMin * 100);
cmd[4] = (byte)(_return >> 8);
cmd[5] = (byte)(_return);
//---参数设置---ADC采样结果比对的点的间隔数
_return = (int)(deviceCurrent.m_PassSpacePointNum);
cmd[6] = (byte)(_return >> 8);
cmd[7] = (byte)(_return);
//---参数设置---ADC采样结果差值的最大值
_return = (int)(deviceCurrent.m_PassSpacePointMax);
cmd[8] = (byte)(_return >> 8);
cmd[9] = (byte)(_return);
//---参数设置---ADC采样结果差值的最小值
_return = (int)(deviceCurrent.m_PassSpacePointMin);
cmd[10] = (byte)(_return >> 8);
cmd[11] = (byte)(_return);
//---参数设置---终止频率点的电流最大值
_return = (int)(deviceCurrent.m_StopPassMax * 100);
cmd[12] = (byte)(_return >> 8);
cmd[13] = (byte)(_return);
//---参数设置---终止频率点的电流最小值
_return = (int)(deviceCurrent.m_StopPassMin * 100);
cmd[14] = (byte)(_return >> 8);
cmd[15] = (byte)(_return);
//---返回的结果
byte[] res = null;
//---将命令写入设备并读取返回的值
_return = usedPort.SendCmdAndReadResponse(cmd, ref res, 300);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0) && (res[usedPort.m_COMMPortDataReadIndex + 2] == cmd[1]))
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流的第" + (freqPointIndexCMD - 3).ToString() + "个点的电流参数设置成功!\r\n", Color.Black, false);
}
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
public async Task InitializeAsync()
{
var text = new TitleTextPair(await Env.Cipher.DecryptFileAsync(File)).Text;
TabPage.Text = Helper.StripTags(Title);
TabPage.Tag = this;
var splitContainer = new SplitContainer
{
Dock = DockStyle.Fill,
Parent = TabPage,
SplitterWidth = 1,
SplitterDistance = Env.Config.SplitterDistance,
TabStop = false
};
_panel = new RichTextBoxPlus
{
Dock = DockStyle.Fill,
Parent = splitContainer.Panel1,
BorderStyle = BorderStyle.None,
ReadOnly = true,
WordWrap = false,
TabStop = false
};
_rtb = new RichTextBoxPlus
{
Dock = DockStyle.Fill,
Parent = splitContainer.Panel2,
AcceptsTab = true,
BorderStyle = BorderStyle.None,
ReadOnly = Env.FlagManager.HasFlag("ReadOnly") || Program.ReadOnly,
Text = text
};
UpdatePanel(true);
if (_textEditorForm.TryGetPosition(Name, out var rtbPosition))
{
_rtb.LoadPosition(rtbPosition);
}
_changed = false;
_rtb.TextChanged += (s, e) =>
{
_changed = true;
_shouldUpdatePanel = true;
};
_rtb.KeyDown += async(s, e) =>
{
if (e.Handled)
{
return;
}
switch (e.KeyData)
{
case Keys.F6:
e.Handled = true;
OpenMode(MoveSelectedLines);
break;
case Keys.F6 | Keys.Shift:
e.Handled = true;
OpenMode(MoveCaretToSection);
break;
case Keys.Control | Keys.PageUp:
e.Handled = true;
MoveCaretToTopOfSection();
break;
case Keys.Control | Keys.PageDown:
e.Handled = true;
MoveCaretToEndOfSection();
break;
case Keys.Control | Keys.W:
e.Handled = true;
await SaveAsync();
Close();
break;
case Keys.F2:
e.Handled = true;
await Rename();
break;
case Keys.F5:
e.Handled = true;
Compile();
break;
}
};
_panel.MouseClick += (s, e) =>
{
_rtb.Focus();
MoveCaretToSection(_panel.GetCurrentLine());
};
Env.FlagManager.FlagsChanged += FlagsChanged;
}
/// <summary>
///
/// </summary>
/// <param name="usedPort"></param>
/// <param name="usedChart"></param>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int FreqCurrentDo(COMMPort usedPort, MyChart usedChart, RichTextBox msg = null)
{
if (usedPort == null)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信端口初始化失败!\r\n", Color.Red, false);
}
return(1);
}
int _return = 0;
byte[] res = null;
//---将命令写入设备并读取返回的值
_return = usedPort.ReadFromDevice(ref res, 1000, msg);
//---通信验证
if ((_return == 0) && (usedPort.m_COMMPortReadDataFormatPassed == true) && (res[usedPort.m_COMMPortDataReadIndex + 1] == 0))
{
if (msg != null)
{
//---清除文本
RichTextBoxPlus.Clear(msg);
//---消息
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "频率电流扫描结果读取成功!\r\n", Color.Black, false);
//---进行一次频率电流扫描消耗的时间
RichTextBoxPlus.AppendTextInfoWithDateTime(msg, "消耗的时间:" + ((int)usedPort.m_COMMPortUsedTime.Milliseconds).ToString("D") + "ms\r\n", Color.Black, false);
}
this.usedSiteCurrent = new RFASKSiteCurrent();
byte[] siteCurrent = new byte[res.Length - usedPort.m_COMMPortDataReadIndex - 4];
Array.Copy(res, (usedPort.m_COMMPortDataReadIndex + 4), siteCurrent, 0, siteCurrent.Length);
//---获取各个site的电流
this.usedSiteCurrent.Init(res[usedPort.m_COMMPortDataReadIndex + 3], siteCurrent);
//---将数据刷新到画图控件
this.usedSiteCurrent.Init(res[usedPort.m_COMMPortDataReadIndex + 3], 2, usedChart);
//---打印Log数据
this.usedSiteCurrent.PrintfLog(msg);
}
else
{
if (_return != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信发生错误!\r\n", Color.Red, false);
}
}
else if (usedPort.m_COMMPortDataFormatPassed == false)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "读取的数据格式不合法!\r\n", Color.Red, false);
}
}
else if (res[usedPort.m_COMMPortDataReadIndex + 1] != 0)
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "数据返回的结果错误!\r\n", Color.Red, false);
}
}
else
{
if (msg != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(msg, "通信命令验证错误!\r\n", Color.Red, false);
}
}
}
return(_return);
}
/// <summary>
///
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
public virtual void Button_Click(object sender, System.EventArgs e)
{
Button btn = (Button)sender;
btn.Enabled = false;
switch (btn.Name)
{
case "button_COMMInit":
if (btn.Text == "打开设备")
{
//if ((this.commPort != null) &&(this.commPort.OpenDevice(this.comboBox_COMMName.Text, this.commRichTextBox) == 0))
if ((this.commPort != null) && (this.commPort.OpenDevice(this.m_COMMSerialPortParam, this.commRichTextBox) == 0))
{
btn.Text = "关闭设备";
this.pictureBox_COMMState.Image = Properties.Resources.open;
//---消息显示
if (this.commRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.commRichTextBox, "设备打开成功!\r\n",
Color.Black, false);
}
this.COMMControl(false);
//---加载设备移除处理
if (this.commPort.m_OnRemoveDeviceEvent == null)
{
this.commPort.m_OnRemoveDeviceEvent = this.AddWatcherPortRemove;
}
}
else
{
this.pictureBox_COMMState.Image = Properties.Resources.error;
if (this.commRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.commRichTextBox, "设备打开失败!\r\n",
Color.Red, false);
}
}
}
else if (btn.Text == "关闭设备")
{
if (this.commPort != null)
{
this.commPort.CloseDevice();
btn.Text = "打开设备";
this.pictureBox_COMMState.Image = Properties.Resources.lost;
//---消息显示
if (this.commRichTextBox != null)
{
RichTextBoxPlus.AppendTextInfoTopWithDataTime(this.commRichTextBox, "设备关闭成功!\r\n",
Color.Black, false);
}
this.COMMControl(true);
}
}
else if (btn.Text == "配置设备")
{
//---更新设备配置参数
}
else
{
MessageBoxPlus.Show(this.commForm, "设备操作异常！错误操作：" + btn.Text, "错误提示");
}
break;
default:
break;
}
btn.Enabled = true;
}
