protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double length = 10;
var result = RhinoGet.GetNumber("Select length", false, ref length);
if (result != Result.Success)
{
return(result);
}
var objects = doc.Objects.FindByObjectType(ObjectType.Curve);
doc.Objects.Delete(_baked, true);
_baked.Clear();
foreach (var obj in objects)
{
var curve = obj.Geometry as Curve;
var extrusion = Surface.CreateExtrusion(curve, Vector3d.ZAxis * length);
var guid = doc.Objects.AddSurface(extrusion);
_baked.Add(guid);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// get plane
var rc = RhinoGet.GetPlane(out var plane);
if (rc != Result.Success)
{
return(rc);
}
// get radius
double radius = 0;
rc = RhinoGet.GetNumber("Specify Radius", false, ref radius, 0.1, 1000000);
if (rc != Result.Success)
{
return(rc);
}
// create spheredata
var data = new SphereData(plane, radius);
// and sphere object
var sphereObject = data.CreateCustomObject();
// add sphereObject to doc
doc.Objects.AddRhinoObject(sphereObject);
//redraw views
doc.Views.Redraw();
// return success
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
#region user input
// select a surface
var gs = new GetObject();
gs.SetCommandPrompt("select surface");
gs.GeometryFilter = ObjectType.Surface;
gs.DisablePreSelect();
gs.SubObjectSelect = false;
gs.Get();
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
// get the brep
var brep = gs.Object(0).Brep();
if (brep == null)
{
return(Result.Failure);
}
// get X and Y
double x = 0.0, y = 0.0;
var rc = RhinoGet.GetNumber("value of X coordinate", true, ref x);
if (rc != Result.Success)
{
return(rc);
}
rc = RhinoGet.GetNumber("value of Y coordinate", true, ref y);
if (rc != Result.Success)
{
return(rc);
}
#endregion
// an earlier version of this sample used a curve-brep intersection to find Z
//var maxZ = maxZIntersectionMethod(brep, x, y, doc.ModelAbsoluteTolerance);
// projecting points is another way to find Z
var max_z = MaxZProjectionMethod(brep, x, y, doc.ModelAbsoluteTolerance);
if (max_z != null)
{
RhinoApp.WriteLine("Maximum surface Z coordinate at X={0}, Y={1} is {2}", x, y, max_z);
doc.Objects.AddPoint(new Point3d(x, y, max_z.Value));
doc.Views.Redraw();
}
else
{
RhinoApp.WriteLine("no maximum surface Z coordinate at X={0}, Y={1} found.", x, y);
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
//GET DATA FROM THE USER
//Select multiple points
ObjRef[] obj_refs;
List <Point3d> finalPts = new List <Point3d>();
var rc = RhinoGet.GetMultipleObjects("Select point", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
foreach (var o_ref in obj_refs)
{
var point = o_ref.Point();
finalPts.Add(point.Location);
}
doc.Objects.UnselectAll();
int depth = 0;
var rc1 = RhinoGet.GetInteger("The Depth of the Snowflake?", false, ref depth, 0, 5);
if (rc1 != Result.Success)
{
return(rc1);
}
double radius = 10;
var rc2 = RhinoGet.GetNumber("The size of the Snowflake?", false, ref radius);
if (rc2 != Result.Success)
{
return(rc2);
}
//CREATE SNOWFLAKES FOR EACH SELECTED POINT AND DEPTH AND RADIUS
foreach (Point3d pt in finalPts)
{
//STEP 1 - Create the initial triangle (just a list of 3 points)
List <Point3d> triangle = GenerateSnowflakeTriangle(pt, radius);
//STEP 2 - FROM TRIANGLE TO SNOWFLAKE
List <Point3d> snowflake = GenerateSnowflake(triangle, depth, doc);
}
return(Result.Success);
}
public static Result ReparameterizeCurve(RhinoDoc doc)
{
ObjRef obj_ref;
var rc = RhinoGet.GetOneObject("Select curve to reparameterize", false, ObjectType.Curve, out obj_ref);
if (rc != Result.Success)
{
return(rc);
}
var curve = obj_ref.Curve();
if (curve == null)
{
return(Result.Failure);
}
double domain_start = 0;
rc = RhinoGet.GetNumber("Domain start", false, ref domain_start);
if (rc != Result.Success)
{
return(rc);
}
double domain_end = 0;
rc = RhinoGet.GetNumber("Domain end", false, ref domain_end);
if (rc != Result.Success)
{
return(rc);
}
if (Math.Abs(curve.Domain.T0 - domain_start) < RhinoMath.ZeroTolerance &&
Math.Abs(curve.Domain.T1 - domain_end) < RhinoMath.ZeroTolerance)
{
return(Result.Nothing);
}
var curve_copy = curve.DuplicateCurve();
curve_copy.Domain = new Interval(domain_start, domain_end);
if (!doc.Objects.Replace(obj_ref, curve_copy))
{
return(Result.Failure);
}
else
{
doc.Views.Redraw();
return(Result.Success);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// get plane
var rc = RhinoGet.GetPlane(out var plane);
if (rc != Result.Success)
{
return(rc);
}
// get length
double length = 0;
rc = RhinoGet.GetNumber("Specify length", false, ref length, 0.1, 1000000);
if (rc != Result.Success)
{
return(rc);
}
// get width
double width = 0;
rc = RhinoGet.GetNumber("Specify width", false, ref width, 0.1, 1000000);
if (rc != Result.Success)
{
return(rc);
}
// get height
double height = 0;
rc = RhinoGet.GetNumber("Specify height", false, ref height, 0.1, 1000000);
if (rc != Result.Success)
{
return(rc);
}
// create rectangleData
var data = new BoxData(plane, length, width, height);
// and sphere object
var boxObject = data.CreateCustomObject();
// add sphereObject to doc
doc.Objects.AddRhinoObject(boxObject);
//redraw views
doc.Views.Redraw();
// return success
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
double psize = doc.Views.ActiveView.DisplayPipeline.DisplayPipelineAttributes.PointRadius;
Result res = RhinoGet.GetNumber("Set point size", true, ref psize, 0.1, 10);
//if (res != Result.Success)
//{
// return res;
//}
RhinoApp.WriteLine(string.Format("New point size: {0}", psize));
doc.Views.ActiveView.DisplayPipeline.DisplayPipelineAttributes.PointRadius = (float)psize;
doc.Views.ActiveView.ActiveViewport.DisplayMode.DisplayAttributes.PointRadius = (float)psize;
RFContext.PointSize = psize;
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
var apartmentHousesPercetage = new double();
var population = new double();
ObjRef[] srcCurves;
RhinoGet.GetMultipleObjects("ClosedPolygones", false, ObjectType.Curve, out srcCurves);
RhinoGet.GetNumber("Insert population", false, ref population, 0, 1000000);
RhinoGet.GetNumber("Percent of population living in apartment houses", false, ref apartmentHousesPercetage, 0, 100000);
var dicts = new Dictionary <Guid, DataDto>();
for (var i = 0; i < srcCurves.Count(); i++)
{
var o = GetDto(srcCurves[i]);
dicts.Add(srcCurves[i].ObjectId, o);
}
var optimalLivingArea = GetOptimalLivingArea((int)Math.Round(population), (int)Math.Round(apartmentHousesPercetage));
var excistingLivingArea = GetExcistingLivingArea(dicts);
if (optimalLivingArea > 0 && excistingLivingArea > 0)
{
var overStockPercent = (excistingLivingArea - optimalLivingArea) * 100 / excistingLivingArea;
RhinoApp.WriteLine($"Overstock {overStockPercent} percent");
}
else
{
RhinoApp.WriteLine($"No info to calculate overstock percent");
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var gc1 = new GetObject();
gc1.DisablePreSelect();
gc1.SetCommandPrompt("Select first curve to fillet (close to the end you want to fillet)");
gc1.GeometryFilter = ObjectType.Curve;
gc1.GeometryAttributeFilter = GeometryAttributeFilter.OpenCurve;
gc1.Get();
if (gc1.CommandResult() != Result.Success)
{
return(gc1.CommandResult());
}
var curve1_obj_ref = gc1.Object(0);
var curve1 = curve1_obj_ref.Curve();
if (curve1 == null)
{
return(Result.Failure);
}
var curve1_point_near_end = curve1_obj_ref.SelectionPoint();
if (curve1_point_near_end == Point3d.Unset)
{
return(Result.Failure);
}
var gc2 = new GetObject();
gc2.DisablePreSelect();
gc2.SetCommandPrompt("Select second curve to fillet (close to the end you want to fillet)");
gc2.GeometryFilter = ObjectType.Curve;
gc2.GeometryAttributeFilter = GeometryAttributeFilter.OpenCurve;
gc2.Get();
if (gc2.CommandResult() != Result.Success)
{
return(gc2.CommandResult());
}
var curve2_obj_ref = gc2.Object(0);
var curve2 = curve2_obj_ref.Curve();
if (curve2 == null)
{
return(Result.Failure);
}
var curve2_point_near_end = curve2_obj_ref.SelectionPoint();
if (curve2_point_near_end == Point3d.Unset)
{
return(Result.Failure);
}
double radius = 0;
var rc = RhinoGet.GetNumber("fillet radius", false, ref radius);
if (rc != Result.Success)
{
return(rc);
}
var join = false;
var trim = true;
var arc_extension = true;
var fillet_curves = Curve.CreateFilletCurves(curve1, curve1_point_near_end, curve2, curve2_point_near_end, radius,
join, trim, arc_extension, doc.ModelAbsoluteTolerance, doc.ModelAngleToleranceDegrees);
if (fillet_curves == null /*|| fillet_curves.Length != 3*/)
{
return(Result.Failure);
}
foreach (var fillet_curve in fillet_curves)
{
doc.Objects.AddCurve(fillet_curve);
}
doc.Views.Redraw();
return(rc);
}
public static Result DivideCurveStraight(RhinoDoc doc)
{
// user input
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select curve to divide", false,
ObjectType.Curve | ObjectType.EdgeFilter, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
double distance_between_divisions = 5;
rc = RhinoGet.GetNumber("Distance between divisions", false,
ref distance_between_divisions, 1.0, Double.MaxValue);
if (rc != Result.Success)
{
return(rc);
}
// generate the points
var points = new List <Point3d>();
foreach (var obj_ref in obj_refs)
{
var curve = obj_ref.Curve();
if (curve == null)
{
return(Result.Failure);
}
var t0 = curve.Domain.Min;
points.Add(curve.PointAt(t0));
var sphere_center = curve.PointAt(t0);
var t = t0;
var rest_of_curve = curve;
while (true)
{
var sphere = new Sphere(sphere_center, distance_between_divisions);
Curve[] overlap_curves;
Point3d[] intersect_points;
var b = Intersection.CurveBrep(rest_of_curve, sphere.ToBrep(), 0.0,
out overlap_curves, out intersect_points);
if (!b || (overlap_curves.Length == 0 && intersect_points.Length == 0))
{
break;
}
double intersect_param;
Point3d intersect_point;
NextintersectParamAndPoint(overlap_curves, intersect_points, rest_of_curve,
out intersect_param, out intersect_point);
points.Add(intersect_point);
t = intersect_param;
sphere_center = intersect_point;
rest_of_curve = curve.Split(t)[1];
}
}
foreach (var point in points)
{
doc.Objects.AddPoint(point);
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result ContourCurves(RhinoDoc doc)
{
var filter = ObjectType.Surface | ObjectType.PolysrfFilter | ObjectType.Mesh;
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select objects to contour", false, filter, out obj_refs);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Contour plane base point");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var base_point = gp.Point();
gp.DrawLineFromPoint(base_point, true);
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
if (base_point.DistanceTo(end_point) < RhinoMath.ZeroTolerance)
{
return(Result.Nothing);
}
double distance = 1.0;
rc = RhinoGet.GetNumber("Distance between contours", false, ref distance);
if (rc != Result.Success)
{
return(rc);
}
var interval = Math.Abs(distance);
Curve[] curves = null;
foreach (var obj_ref in obj_refs)
{
var geometry = obj_ref.Geometry();
if (geometry == null)
{
return(Result.Failure);
}
if (geometry is Brep)
{
curves = Brep.CreateContourCurves(geometry as Brep, base_point, end_point, interval);
}
else
{
curves = Mesh.CreateContourCurves(geometry as Mesh, base_point, end_point, interval);
}
foreach (var curve in curves)
{
var curve_object_id = doc.Objects.AddCurve(curve);
doc.Objects.Select(curve_object_id);
}
}
if (curves != null)
{
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// mimic the functionality of the contour command using a background threads
// The tricky parts to the contour command are that it dynamically adds
// sections as they are found
const ObjectType filter = ObjectType.Brep | ObjectType.Extrusion | ObjectType.Mesh;
ObjRef[] objrefs;
var rc = RhinoGet.GetMultipleObjects("Select objects for contours", false, filter, out objrefs);
if (rc != Result.Success)
{
return(rc);
}
if (objrefs == null || objrefs.Length < 1)
{
return(Result.Failure);
}
Point3d base_point;
rc = RhinoGet.GetPoint("Contour plane base point", false, out base_point);
if (rc != Result.Success)
{
return(rc);
}
var gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.DrawLineFromPoint(base_point, false);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
Point3d end_point = gp.Point();
double interval = 1;
rc = RhinoGet.GetNumber("Distance between contours", true, ref interval, 0.001, 10000);
if (rc != Result.Success)
{
return(rc);
}
// figure out the combined bounding box of all the selected geometry
BoundingBox bounds = BoundingBox.Unset;
var geometries = new List <GeometryBase>();
foreach (var objref in objrefs)
{
var geometry = objref.Geometry();
var extrusion = geometry as Extrusion;
if (extrusion != null)
{
geometry = objref.Brep();
}
geometries.Add(geometry);
var bbox = geometry.GetBoundingBox(false);
bounds.Union(bbox);
}
Vector3d normal = end_point - base_point;
normal.Unitize();
var curplane = new Plane(base_point, normal);
double min_t, max_t;
if (!curplane.DistanceTo(bounds, out min_t, out max_t))
{
return(Result.Failure);
}
min_t -= interval;
max_t += interval;
min_t = Math.Floor(min_t / interval);
max_t = Math.Ceiling(max_t / interval);
double tolerance = doc.ModelAbsoluteTolerance;
var tasks = new List <Task <Curve[]> >();
var gc = new Rhino.Input.Custom.GetCancel();
for (double t = min_t; t <= max_t; t += 1.0)
{
double offset = t * interval;
var point = base_point + normal * offset;
var plane = new Plane(point, normal);
foreach (var geom in geometries)
{
var geom1 = geom;
var task = Task.Run(() => Section(plane, geom1, tolerance), gc.Token);
tasks.Add(task);
}
}
gc.TaskCompleted += OnTaskCompleted;
rc = gc.WaitAll(tasks, doc);
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
const ObjectType filter = ObjectType.Brep | ObjectType.Extrusion | ObjectType.Mesh;
var rc = RhinoGet.GetMultipleObjects("Select objects to contour", false, filter, out var objrefs);
if (rc != Result.Success)
{
return(rc);
}
if (objrefs == null || objrefs.Length < 1)
{
return(Result.Failure);
}
rc = RhinoGet.GetPoint("Contour plane base point", false, out var base_point);
if (rc != Result.Success)
{
return(rc);
}
var gp = new Rhino.Input.Custom.GetPoint();
gp.SetCommandPrompt("Direction perpendicular to contour planes");
gp.DrawLineFromPoint(base_point, false);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var interval = 1.0;
rc = RhinoGet.GetNumber("Distance between contours", true, ref interval, 0.001, 10000);
if (rc != Result.Success)
{
return(rc);
}
var bounds = BoundingBox.Unset;
var geometries = new List <GeometryBase>();
foreach (var objref in objrefs)
{
var geometry = objref.Geometry();
if (geometry is Extrusion)
{
geometry = objref.Brep();
}
geometries.Add(geometry);
var bbox = geometry.GetBoundingBox(false);
bounds.Union(bbox);
}
var normal = end_point - base_point;
normal.Unitize();
var curplane = new Plane(base_point, normal);
if (!curplane.DistanceTo(bounds, out var min_t, out var max_t))
{
return(Result.Failure);
}
min_t -= interval;
max_t += interval;
min_t = Math.Floor(min_t / interval);
max_t = Math.Ceiling(max_t / interval);
var tolerance = doc.ModelAbsoluteTolerance;
var tasks = new List <Task <Curve[]> >();
var gc = new Rhino.Input.Custom.GetCancel();
for (var t = min_t; t <= max_t; t += 1.0)
{
var offset = t * interval;
var point = base_point + normal * offset;
var plane = new Plane(point, normal);
foreach (var geom in geometries)
{
var geom1 = geom;
var task = Task.Run(() => Section(plane, geom1, tolerance), gc.Token);
tasks.Add(task);
}
}
gc.TaskCompleted += OnTaskCompleted;
rc = gc.WaitAll(tasks, doc);
return(rc);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Rhino.ApplicationSettings.HistorySettings.RecordingEnabled = true;
double tolerance = doc.ModelAbsoluteTolerance;
GetObject gc = new GetObject();
gc.SetCommandPrompt("Select curve(s) for multipipe");
gc.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gc.GroupSelect = true;
gc.GetMultiple(1, 0);
if (gc.CommandResult() != Rhino.Commands.Result.Success)
{
return(gc.CommandResult());
}
List <Curve> curves = new List <Curve>();
for (int i = 0; i < gc.ObjectCount; i++)
{
Rhino.DocObjects.ObjRef objref = gc.Object(i);
Rhino.Geometry.Curve curve = objref.Curve();
curves.Add(curve);
ids.Add(objref.ObjectId);
}
Rhino.Input.Custom.GetNumber gn = new Rhino.Input.Custom.GetNumber();
gn.SetCommandPrompt("Start and end radius");
int opList = gn.AddOptionList("Cap", caps, capIndex);
gn.SetDefaultNumber(radius1);
while (true)
{
Rhino.Input.GetResult get_rc = gn.Get();
if (gn.CommandResult() != Rhino.Commands.Result.Success)
{
return(gn.CommandResult());
}
if (get_rc == Rhino.Input.GetResult.Number)
{
radius1 = gn.Number();
if (radius1 < 0 || radius1 < 0.0)
{
Dialogs.ShowMessage("Value must be >= 0.0", "Warning!");
continue;
}
}
else if (get_rc == Rhino.Input.GetResult.Option)
{
if (gn.OptionIndex() == opList)
{
capIndex = gn.Option().CurrentListOptionIndex;
}
continue;
}
break;
}
while (true)
{
RhinoGet.GetNumber("Middle radius", false, ref radius2);
if (radius2 <= 0 || radius2 <= 0.0)
{
Dialogs.ShowMessage("Value must be > 0.0", "Warning!");
continue;
}
break;
}
Brep[] pipe;
double[] radiParam = { 0.0, 0.5, 1.0 };
double[] radi = { radius1, radius2, radius1 };
PipeCapMode[] pCapM = { PipeCapMode.None, PipeCapMode.Flat, PipeCapMode.Round };
// Create a history record
Rhino.DocObjects.HistoryRecord history = new Rhino.DocObjects.HistoryRecord(this, HISTORY_VERSION);
WriteHistory(history, ids, radius1, radius2, capIndex);
foreach (Curve x in curves)
{
pipe = Brep.CreatePipe(x, radiParam, radi, true, pCapM[capIndex], true, doc.ModelAbsoluteTolerance, doc.ModelAngleToleranceRadians);
doc.Objects.AddBrep(pipe[0], null, history, false);
doc.Views.Redraw();
}
doc.Views.Redraw();
return(Result.Success);
}