/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainer = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainer);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainer))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, "Wrapping");
ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining);
productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType = null)
{
if (element == null || geometryElement == null)
{
return(null);
}
if (exportType == null)
{
exportType = new IFCExportInfoPair(IFCEntityType.IfcBuildingElementProxy, IFCEntityType.IfcBuildingElementProxyType, "NOTDEFINED");
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcBuildingElementProxy;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(exporterIFC, element, guid,
ownerHistory, localPlacement, representation, exportType.ValidatedPredefinedType);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports an element as a covering of type insulation.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if exported successfully, false otherwise.</returns>
public static bool ExportDuctLining(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(false);
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(false);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
IFCAnyHandle ductLining = IFCInstanceExporter.CreateCovering(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, "Wrapping");
ExporterCacheManager.ElementToHandleCache.Register(element.Id, ductLining);
productWrapper.AddElement(element, ductLining, placementSetter.LevelInfo, ecData, true);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, ductLining, matId);
}
}
tr.Commit();
return(true);
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(null);
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports mullion.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="mullion">
/// The mullion object.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="localPlacement">
/// The local placement handle.
/// </param>
/// <param name="setter">
/// The IFCPlacementSetter.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, Mullion mullion, GeometryElement geometryElement,
IFCAnyHandle localPlacement, IFCPlacementSetter setter, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCPlacementSetter mullionSetter = IFCPlacementSetter.Create(exporterIFC, mullion, null, null, ExporterUtil.GetBaseLevelIdForElement(mullion)))
{
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
IFCAnyHandle mullionPlacement = mullionSetter.GetPlacement();
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(localPlacement, mullionPlacement);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle mullionRelativePlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandle mullionLocalPlacement = IFCInstanceExporter.CreateLocalPlacement(file, localPlacement, mullionRelativePlacement);
extraParams.SetLocalPlacement(mullionLocalPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(mullion);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
IFCAnyHandle repHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, mullion, catId,
geometryElement, bodyExporterOptions, null, extraParams, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extraParams.ClearOpenings();
return;
}
string elemGUID = GUIDUtil.CreateGUID(mullion);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string elemObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, mullion);
string name = NamingUtil.GetNameOverride(mullion, elemObjectType);
string description = NamingUtil.GetDescriptionOverride(mullion, null);
string objectType = NamingUtil.GetObjectTypeOverride(mullion, elemObjectType);
string elemTag = NamingUtil.GetTagOverride(mullion, NamingUtil.CreateIFCElementId(mullion));
IFCAnyHandle mullionHnd = IFCInstanceExporter.CreateMember(file, elemGUID, ownerHistory, name, description, objectType,
mullionLocalPlacement, repHnd, elemTag);
ExporterCacheManager.HandleToElementCache.Register(mullionHnd, mullion.Id);
productWrapper.AddElement(mullion, mullionHnd, mullionSetter, extraParams, false);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, mullion);
CategoryUtil.CreateMaterialAssociation(exporterIFC, mullionHnd, matId);
}
}
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle prodDefHnd = null;
bool isBRepSlabHnd = false;
if (!exportParts)
{
ecData.SetLocalPlacement(localPlacement);
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
isBRepSlabHnd = (bodyData.ShapeRepresentationType == ShapeRepresentationType.Brep);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCName(slabElement));
string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement));
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, ifcGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacement, exportParts ? null : prodDefHnd,
ifcTag, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacement, null);
}
productWrapper.AddElement(slabElement, slabHnd, placementSetter, ecData, true);
if (!exportParts)
{
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, slabHnd,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, isBRepSlabHnd);
}
else if (slabElement is FamilyInstance)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement);
Document doc = slabElement.Document;
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, slabElement, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), placementSetter, productWrapper);
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports an element to IFC footing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming
footingType = IFCValidateEntry.GetValidIFCType(element, footingType);
IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(file, instanceGUID, exporterIFC.GetOwnerHistoryHandle(),
instanceName, instanceDescription, instanceObjectType, ecData.GetLocalPlacement(), prodRep, instanceTag, footingType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId);
}
}
productWrapper.AddElement(element, footing, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (roof == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData;
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ecData.ScaledLength > MathUtil.Eps();
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string roofName = NamingUtil.GetNameOverride(roof, NamingUtil.GetIFCName(roof));
string roofDescription = NamingUtil.GetDescriptionOverride(roof, null);
string roofObjectType = NamingUtil.GetObjectTypeOverride(roof, NamingUtil.CreateIFCObjectName(exporterIFC, roof));
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(roof, NamingUtil.CreateIFCElementId(roof));
string roofType = GetIFCRoofType(ifcEnumType);
roofType = IFCValidateEntry.GetValidIFCType(roof, ifcEnumType);
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(file, guid, ownerHistory, roofName, roofDescription,
roofObjectType, localPlacement, exportSlab ? null : representation, elementTag, roofType);
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true);
// will export its host object materials later if it is a roof
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, roofHnd, bodyData.MaterialIds);
}
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
string slabName = roofName + ":1";
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, slabName,
roofDescription, roofObjectType, slabLocalPlacementHnd, representation, elementTag, "ROOF");
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociations(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
tr.Commit();
}
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportGenericElement(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper, IFCExportInfoPair exportType)
{
if (element == null || geometryElement == null)
{
return(null);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
if (exportType.ExportInstance == IFCEntityType.UnKnown)
{
exportType.SetValueWithPair(IFCEntityType.IfcBuildingElementProxy, exportType.ValidatedPredefinedType);
}
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(exportType.ExportInstance))
{
return(null);
}
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle instanceHandle = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle styleHandle = null;
instanceHandle = FamilyExporterUtil.ExportGenericInstance(exportType, exporterIFC, element, productWrapper, placementSetter, ecData, guid, ownerHistory,
representation, exportType.ValidatedPredefinedType, null);
if (exportType.ExportType != IFCEntityType.UnKnown)
{
if (element is FamilyInstance)
{
FamilySymbol familySymbol = (element as FamilyInstance).Symbol;
if (familySymbol != null)
{
HashSet <IFCAnyHandle> propertySetsOpt = new HashSet <IFCAnyHandle>();
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, exportType.ValidatedPredefinedType,
propertySetsOpt, repMapListOpt, element, familySymbol);
}
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
styleHandle = ExporterUtil.CreateGenericTypeFromElement(element, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
}
}
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
productWrapper.AddElement(element, instanceHandle, placementSetter.LevelInfo, ecData, true, exportType);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
ExporterCacheManager.TypeRelationsCache.Add(styleHandle, instanceHandle);
}
}
}
tr.Commit();
}
}
return(instanceHandle);
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <param name="exportRoofAsSingleGeometry">Export roof as single geometry.</param>
public static void ExportRoof(ExporterIFC exporterIFC, Element roof, ref GeometryElement geometryElement,
ProductWrapper productWrapper, bool exportRoofAsSingleGeometry = false)
{
if (roof == null || geometryElement == null)
{
return;
}
string ifcEnumType;
IFCExportInfoPair roofExportType = ExporterUtil.GetProductExportType(exporterIFC, roof, out ifcEnumType);
if (roofExportType.IsUnKnown)
{
roofExportType = new IFCExportInfoPair(IFCEntityType.IfcRoof, "");
}
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, roof, productWrapper);
IFCFile file = exporterIFC.GetFile();
Document doc = roof.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Roof will be split into its parts(temporarily) in order to export the roof by its parts
ExporterUtil.CreateParts(roof, layersetInfo.MaterialIds.Count, ref geometryElement);
bool exportByComponents = ExporterUtil.CanExportByComponentsOrParts(roof) == ExporterUtil.ExportPartAs.ShapeAspect;
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, roof, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData = null;
IFCAnyHandle prodRep = null;
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
IList <ElementId> materialIds = new List <ElementId>();
if (!exportByComponents)
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (bodyData != null && bodyData.MaterialIds != null)
{
materialIds = bodyData.MaterialIds;
}
}
else
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, roof, categoryId, geometryElement, representations);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ((ecData.ScaledLength > MathUtil.Eps() || exportByComponents) &&
roofExportType.ExportInstance == IFCEntityType.IfcRoof && !exportRoofAsSingleGeometry);
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateGenericIFCEntity(
roofExportType, exporterIFC, roof, guid, ownerHistory,
localPlacement, exportSlab ? null : prodRep);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof,
roofExportType, file, ownerHistory, roofExportType.ValidatedPredefinedType,
productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd);
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true, roofExportType);
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
if (exportByComponents && (exportSlab || exportRoofAsSingleGeometry))
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, roof, prodRep,
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, layersetInfo, ecData);
}
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1";
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory,
slabLocalPlacementHnd, prodRep, slabRoofPredefinedType);
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName);
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair(IFCEntityType.IfcSlab, slabRoofPredefinedType);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false, slabRoofExportType);
// Create type
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
ExporterUtil.AddIntoComplexPropertyCache(slabHnd, layersetInfo);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (bodyData != null)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
}
else
{
OpeningUtil.CreateOpeningsIfNecessary(roofHnd, roof, ecData, offsetTransform,
exporterIFC, localPlacement, placementSetter, productWrapper);
// For earlier than IFC4 version of IFC export, the material association will be done at the Roof host level with MaterialSetUsage
// This one is only for IFC4 and above
if ((roof is RoofBase) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
if (layersetInfo != null && !IFCAnyHandleUtil.IsNullOrHasNoValue(layersetInfo.MaterialLayerSetHandle))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, layersetInfo.MaterialLayerSetHandle);
}
else if (layersetInfo != null && layersetInfo.MaterialIds != null)
{
materialIds = layersetInfo.MaterialIds.Select(x => x.m_baseMatId).ToList();
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, materialIds);
}
}
}
}
tr.Commit();
}
}
}
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, ref GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcCovering;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
MaterialLayerSetInfo layersetInfo = new MaterialLayerSetInfo(exporterIFC, element, productWrapper);
using (IFCTransaction transaction = new IFCTransaction(file))
{
// For IFC4RV export, Element will be split into its parts(temporarily) in order to export the wall by its parts
// If Parts are created by code and not by user then their name should be equal to Material name.
bool setMaterialNameToPartName = ExporterUtil.CreateParts(element, layersetInfo.MaterialIds.Count, ref geomElem);
ExporterUtil.ExportPartAs exportPartAs = ExporterUtil.CanExportByComponentsOrParts(element);
bool exportByComponents = exportPartAs == ExporterUtil.ExportPartAs.ShapeAspect;
bool exportParts = exportPartAs == ExporterUtil.ExportPartAs.Part;
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (exportByComponents)
{
prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, element, categoryId, geomElem, representations);
}
else
{
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string coveringType = IFCValidateEntry.GetValidIFCPredefinedTypeType(/*element,*/ ifcEnumType, defaultCoveringEnumType, "IfcCoveringType");
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
setter.LocalPlacement, prodRep, coveringType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null, setMaterialNameToPartName);
}
else if (exportByComponents)
{
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, element, prodRep,
productWrapper, setter, setter.LocalPlacement, ElementId.InvalidElementId, layersetInfo, ecData);
}
ExporterUtil.AddIntoComplexPropertyCache(covering, layersetInfo);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcCovering, IFCEntityType.IfcCoveringType, coveringType);
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, coveringType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, covering);
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, ecData, false, exportInfo);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, ecData, true, exportInfo);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a generic element as an IfcSlab.</summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if the floor is exported successfully, false otherwise.</returns>
public static void ExportGenericSlab(ExporterIFC exporterIFC, Element slabElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
bool exportParts = PartExporter.CanExportParts(slabElement);
IFCFile file = exporterIFC.GetFile();
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, slabElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(slabElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.TessellationLevel = BodyExporter.GetTessellationLevel();
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
slabElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(slabElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(slabElement, ifcEnumType, "FLOOR");
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(slabElement, NamingUtil.GetIFCNamePlusIndex(slabElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(slabElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(slabElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(slabElement, NamingUtil.CreateIFCElementId(slabElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, slabElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(slabElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, slabElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (slabElement is HostObject)
{
HostObject hostObject = slabElement as HostObject;
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
else if (slabElement is FamilyInstance && slabHnds.Count > 0)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, slabElement);
Document doc = slabElement.Document;
foreach (IFCAnyHandle slabHnd in slabHnds)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, ifcEnumType, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = ExporterCacheManager.ExportOptionsCache.ExportAs4 ? GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
if (!(IFCAnyHandleUtil.IsNullOrHasNoValue(floorAndProperties.FootprintInfo.FootPrintHandle)))
{
representations.Add(floorAndProperties.FootprintInfo.FootPrintHandle);
}
}
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
//IList<IFCAnyHandle> prodRepsTmp = new List<IFCAnyHandle>();
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
// Get back the representations, we need to add the Footprint to it
//IList<IFCAnyHandle> representations = IFCAnyHandleUtil.GetRepresentations(prodRepsTmp[ii]);
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
//representations.Add(footprintShapeRepresentation);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
//IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
//prodReps.Add(prodRep);
}
else
{
//prodReps.Add(prodRepsTmp[ii]);
}
// We do not need the prodRepsTmp anymore, delete the handle:
//prodRepsTmp[ii].Delete();
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
//if ((canExportAsInternalExtrusion || exportedAsInternalExtrusion) && ExporterCacheManager.ExportOptionsCache.ExportAs4)
//{
// slabHnd = IFCInstanceExporter.CreateSlabStandardCase(file, currentGUID, ownerHistory, ifcName,
// ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
// ifcTag, entityType);
//}
//else
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
//// For now we have to be content without IfcOpeningStandardCase from the openings created by this native call because it is too much to
//// "reverse engineer" the IFChandle
//foreach (IFCAnyHandle slabHandle in slabHnds)
//{
// updateOpeningProfileRep(exporterIFC, slabHandle);
//}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a ramp to IfcRamp, without decomposing into separate runs and landings.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The ramp type.</param>
/// <param name="ramp">The ramp element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="numFlights">The number of flights for a multistory ramp.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRamp(ExporterIFC exporterIFC, string ifcEnumType, Element ramp, GeometryElement geometryElement,
int numFlights, ProductWrapper productWrapper)
{
if (ramp == null || geometryElement == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRamp;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
// TESTING
foreach (GeometryObject geomObj in geometryElement)
{
Visibility visibility = geomObj.Visibility;
}
IFCFile file = exporterIFC.GetFile();
ElementId categoryId = CategoryUtil.GetSafeCategoryId(ramp);
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, ramp))
{
IFCAnyHandle contextOfItemsFootPrint = exporterIFC.Get3DContextHandle("FootPrint");
IFCAnyHandle contextOfItemsAxis = exporterIFC.Get3DContextHandle("Axis");
Transform trf = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, placementSetter.LocalPlacement);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IList <(Solid body, Face largestTopFace)> rampFlights = null;
IList <Solid> landings = null;
if (IdentifyRampFlightAndLanding(geometryElement, out rampFlights, out landings))
{
string rampGUID = GUIDUtil.CreateGUID(ramp);
IFCAnyHandle rampLocalPlacement = placementSetter.LocalPlacement;
string predefType = "NOTDEFINED"; //Temporary
IFCAnyHandle rampContainerHnd = IFCInstanceExporter.CreateRamp(exporterIFC, ramp, rampGUID, ownerHistory, rampLocalPlacement, null, predefType);
// Create appropriate type
IFCExportInfoPair exportType = new IFCExportInfoPair();
exportType.SetValueWithPair(IFCEntityType.IfcRamp);
IFCAnyHandle rampTypeHnd = ExporterUtil.CreateGenericTypeFromElement(ramp, exportType, exporterIFC.GetFile(), ownerHistory, predefType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(rampTypeHnd, rampContainerHnd);
productWrapper.AddElement(ramp, rampContainerHnd, placementSetter.LevelInfo, null, true);
//Breakdown the Ramp into its components: RampFlights and Landings
int rampFlightIndex = 0;
int landingIndex = 0;
HashSet <IFCAnyHandle> rampComponents = new HashSet <IFCAnyHandle>();
foreach ((Solid body, Face topFace)rampFlight in rampFlights)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.AllowVerticalOffsetOfBReps = false;
ecData.SetLocalPlacement(ExporterUtil.CreateLocalPlacement(file, placementSetter.LocalPlacement, null));
ecData.ReuseLocalPlacement = true;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData = BodyExporter.ExportBody(exporterIFC, ramp, categoryId, ElementId.InvalidElementId, rampFlight.body, bodyExporterOptions, ecData);
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
ecData.ClearOpenings();
continue;
}
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(bodyRep);
//if (!ExporterCacheManager.ExportOptionsCache.ExportAsCoordinationView2)
//{
// CreateWalkingLineAndFootprint(exporterIFC, run, bodyData, categoryId, trf, ref reps);
//}
Transform boundingBoxTrf = (bodyData.OffsetTransform == null) ? Transform.Identity : bodyData.OffsetTransform.Inverse;
IList <GeometryObject> solidList = new List <GeometryObject>();
solidList.Add(rampFlight.body);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, solidList, boundingBoxTrf);
if (boundingBoxRep != null)
{
reps.Add(boundingBoxRep);
}
IFCAnyHandle representation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, reps);
rampFlightIndex++;
string flightGUID = GUIDUtil.CreateSubElementGUID(ramp, rampFlightIndex);
string origFlightName = IFCAnyHandleUtil.GetStringAttribute(rampContainerHnd, "Name") + " " + rampFlightIndex;
string flightName = NamingUtil.GetOverrideStringValue(ramp, "IfcRampFlight.Name (" + rampFlightIndex + ")", origFlightName);
IFCAnyHandle flightLocalPlacement = ecData.GetLocalPlacement();
string flightPredefType = NamingUtil.GetOverrideStringValue(ramp, "IfcRampFlight.PredefinedType (" + rampFlightIndex + ")", null);
IFCAnyHandle rampFlightHnd = IFCInstanceExporter.CreateRampFlight(exporterIFC, null, flightGUID, ownerHistory, flightLocalPlacement,
representation, flightPredefType);
IFCAnyHandleUtil.OverrideNameAttribute(rampFlightHnd, flightName);
rampComponents.Add(rampFlightHnd);
// Create type
IFCExportInfoPair flightEportType = new IFCExportInfoPair();
flightEportType.SetValueWithPair(IFCEntityType.IfcRampFlight);
IFCAnyHandle flightTypeHnd = IFCInstanceExporter.CreateGenericIFCType(flightEportType, null, exporterIFC.GetFile(), null, null, flightPredefType);
IFCAnyHandleUtil.OverrideNameAttribute(flightTypeHnd, flightName);
ExporterCacheManager.TypeRelationsCache.Add(flightTypeHnd, rampFlightHnd);
CategoryUtil.CreateMaterialAssociation(exporterIFC, rampFlightHnd, bodyData.MaterialIds);
IFCAnyHandle psetRampFlightCommonHnd = CreatePSetRampFlightCommon(exporterIFC, file, ramp, rampFlightIndex, rampFlight.topFace);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(psetRampFlightCommonHnd))
{
HashSet <IFCAnyHandle> relatedObjects = new HashSet <IFCAnyHandle>()
{
rampFlightHnd
};
ExporterUtil.CreateRelDefinesByProperties(file, GUIDUtil.CreateGUID(), ownerHistory, null, null, relatedObjects, psetRampFlightCommonHnd);
}
}
}
foreach (Solid landing in landings)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.AllowVerticalOffsetOfBReps = false;
ecData.SetLocalPlacement(ExporterUtil.CreateLocalPlacement(file, placementSetter.LocalPlacement, null));
ecData.ReuseLocalPlacement = true;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData = BodyExporter.ExportBody(exporterIFC, ramp, categoryId, ElementId.InvalidElementId, landing, bodyExporterOptions, ecData);
IFCAnyHandle bodyRep = bodyData.RepresentationHnd;
if (IFCAnyHandleUtil.IsNullOrHasNoValue(bodyRep))
{
ecData.ClearOpenings();
continue;
}
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(bodyRep);
//if (!ExporterCacheManager.ExportOptionsCache.ExportAsCoordinationView2)
//{
// CreateWalkingLineAndFootprint(exporterIFC, run, bodyData, categoryId, trf, ref reps);
//}
Transform boundingBoxTrf = (bodyData.OffsetTransform == null) ? Transform.Identity : bodyData.OffsetTransform.Inverse;
IList <GeometryObject> solidList = new List <GeometryObject>();
solidList.Add(landing);
IFCAnyHandle boundingBoxRep = BoundingBoxExporter.ExportBoundingBox(exporterIFC, solidList, boundingBoxTrf);
if (boundingBoxRep != null)
{
reps.Add(boundingBoxRep);
}
IFCAnyHandle representation = IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null, null, reps);
landingIndex++;
string landingGUID = GUIDUtil.CreateSubElementGUID(ramp, landingIndex);
string origLandingName = IFCAnyHandleUtil.GetStringAttribute(rampContainerHnd, "Name") + " " + landingIndex;
string landingName = NamingUtil.GetOverrideStringValue(ramp, "IfcRampLanding.Name (" + landingIndex + ")", origLandingName);
IFCAnyHandle landingLocalPlacement = ecData.GetLocalPlacement();
string landingPredefType = "LANDING";
IFCAnyHandle rampLandingHnd = IFCInstanceExporter.CreateSlab(exporterIFC, ramp, landingGUID, ownerHistory, landingLocalPlacement,
representation, landingPredefType);
IFCAnyHandleUtil.OverrideNameAttribute(rampLandingHnd, landingName);
rampComponents.Add(rampLandingHnd);
// Create type
IFCExportInfoPair landingEportType = new IFCExportInfoPair();
landingEportType.SetValueWithPair(IFCEntityType.IfcSlab);
IFCAnyHandle landingTypeHnd = IFCInstanceExporter.CreateGenericIFCType(landingEportType, null, exporterIFC.GetFile(), null, null, landingPredefType);
IFCAnyHandleUtil.OverrideNameAttribute(landingTypeHnd, landingName);
ExporterCacheManager.TypeRelationsCache.Add(landingTypeHnd, rampLandingHnd);
CategoryUtil.CreateMaterialAssociation(exporterIFC, rampLandingHnd, bodyData.MaterialIds);
IFCAnyHandle psetSlabCommonHnd = CreatePSetRampLandingCommon(exporterIFC, file, ramp, landingIndex);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(psetSlabCommonHnd))
{
HashSet <IFCAnyHandle> relatedObjects = new HashSet <IFCAnyHandle>()
{
rampLandingHnd
};
ExporterUtil.CreateRelDefinesByProperties(file, GUIDUtil.CreateGUID(), ownerHistory, null, null, relatedObjects, psetSlabCommonHnd);
}
}
}
if (rampComponents.Count > 0)
{
IFCInstanceExporter.CreateRelAggregates(file, GUIDUtil.CreateGUID(), ownerHistory, null, null, rampContainerHnd, rampComponents);
}
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ecData.ReuseLocalPlacement = false;
GeometryElement rampGeom = GeometryUtil.GetOneLevelGeometryElement(geometryElement, numFlights);
BodyData bodyData;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
ramp, categoryId, rampGeom, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
string containedRampGuid = GUIDUtil.CreateSubElementGUID(ramp, (int)IFCRampSubElements.ContainedRamp);
IFCAnyHandle containedRampLocalPlacement = ExporterUtil.CreateLocalPlacement(file, ecData.GetLocalPlacement(), null);
string rampType = GetIFCRampType(ifcEnumType);
List <IFCAnyHandle> components = new List <IFCAnyHandle>();
IList <IFCExtrusionCreationData> componentExtrusionData = new List <IFCExtrusionCreationData>();
IFCAnyHandle containedRampHnd = IFCInstanceExporter.CreateRamp(exporterIFC, ramp, containedRampGuid, ownerHistory,
containedRampLocalPlacement, representation, rampType);
components.Add(containedRampHnd);
componentExtrusionData.Add(ecData);
//productWrapper.AddElement(containedRampHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociation(exporterIFC, containedRampHnd, bodyData.MaterialIds);
string guid = GUIDUtil.CreateGUID(ramp);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle rampHnd = IFCInstanceExporter.CreateRamp(exporterIFC, ramp, guid, ownerHistory,
localPlacement, null, rampType);
productWrapper.AddElement(ramp, rampHnd, placementSetter.LevelInfo, ecData, true);
StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampHnd, components, localPlacement);
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(ramp.Id, stairRampInfo);
ExportMultistoryRamp(exporterIFC, ramp, numFlights, rampHnd, components, componentExtrusionData, placementSetter,
productWrapper);
}
}
}
tr.Commit();
}
}
/// <summary>
/// Exports a ramp to IfcRamp, without decomposing into separate runs and landings.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The ramp type.</param>
/// <param name="ramp">The ramp element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="numFlights">The number of flights for a multistory ramp.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRamp(ExporterIFC exporterIFC, string ifcEnumType, Element ramp, GeometryElement geometryElement,
int numFlights, ProductWrapper productWrapper)
{
if (ramp == null || geometryElement == null)
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum = Common.Enums.IFCEntityType.IfcRamp;
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, ramp))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ecData.ReuseLocalPlacement = false;
GeometryElement rampGeom = GeometryUtil.GetOneLevelGeometryElement(geometryElement, numFlights);
BodyData bodyData;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(ramp);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
ramp, categoryId, rampGeom, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
string containedRampGuid = GUIDUtil.CreateSubElementGUID(ramp, (int)IFCRampSubElements.ContainedRamp);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle containedRampLocalPlacement = ExporterUtil.CreateLocalPlacement(file, ecData.GetLocalPlacement(), null);
string rampType = ifcEnumType;
List <IFCAnyHandle> components = new List <IFCAnyHandle>();
IList <IFCExtrusionCreationData> componentExtrusionData = new List <IFCExtrusionCreationData>();
IFCAnyHandle containedRampHnd = IFCInstanceExporter.CreateRamp(exporterIFC, ramp, containedRampGuid, ownerHistory,
containedRampLocalPlacement, representation, rampType);
components.Add(containedRampHnd);
componentExtrusionData.Add(ecData);
//productWrapper.AddElement(containedRampHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociation(exporterIFC, containedRampHnd, bodyData.MaterialIds);
string guid = GUIDUtil.CreateGUID(ramp);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle rampHnd = IFCInstanceExporter.CreateRamp(exporterIFC, ramp, guid, ownerHistory,
localPlacement, null, rampType);
productWrapper.AddElement(ramp, rampHnd, placementSetter.LevelInfo, ecData, true);
StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampHnd, components, localPlacement);
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(ramp.Id, stairRampInfo);
ExportMultistoryRamp(exporterIFC, ramp, numFlights, rampHnd, components, componentExtrusionData, placementSetter,
productWrapper);
}
tr.Commit();
}
}
}
/// <summary>
/// Exports an element as building element proxy.
/// </summary>
/// <remarks>
/// This function is called from the Export function, but can also be called directly if you do not
/// want CreateInternalPropertySets to be called.
/// </remarks>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>The handle if created, null otherwise.</returns>
public static IFCAnyHandle ExportBuildingElementProxy(ExporterIFC exporterIFC, Element element,
GeometryElement geometryElement, ProductWrapper productWrapper)
{
if (element == null || geometryElement == null)
{
return(null);
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcBuildingElementProxy", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return(null);
}
}
IFCFile file = exporterIFC.GetFile();
IFCAnyHandle buildingElementProxy = null;
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return(null);
}
string guid = GUIDUtil.CreateGUID(element);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
string revitObjectType = exporterIFC.GetFamilyName();
string name = NamingUtil.GetNameOverride(element, revitObjectType);
string description = NamingUtil.GetDescriptionOverride(element, null);
string objectType = NamingUtil.GetObjectTypeOverride(element, revitObjectType);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
buildingElementProxy = IFCInstanceExporter.CreateBuildingElementProxy(file, guid,
ownerHistory, name, description, objectType, localPlacement, representation, elementTag, null);
productWrapper.AddElement(element, buildingElementProxy, placementSetter.LevelInfo, ecData, true);
}
tr.Commit();
}
}
return(buildingElementProxy);
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportType exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
BodyData bodyData = null;
IFCAnyHandle productRepresentation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
ElementId typeId = element.GetTypeId();
ElementType type = element.Document.GetElement(typeId) as ElementType;
FamilyTypeInfo currentTypeInfo = ExporterCacheManager.TypeObjectsCache.Find(typeId, false);
bool found = currentTypeInfo.IsValid();
if (!found)
{
string typeGUID = GUIDUtil.CreateGUID(type);
string typeName = NamingUtil.GetNameOverride(type, NamingUtil.GetIFCName(type));
string typeObjectType = NamingUtil.GetObjectTypeOverride(type, NamingUtil.CreateIFCObjectName(exporterIFC, type));
string applicableOccurence = NamingUtil.GetOverrideStringValue(type, "IfcApplicableOccurrence", typeObjectType);
string typeDescription = NamingUtil.GetDescriptionOverride(type, null);
string typeTag = NamingUtil.GetTagOverride(type, NamingUtil.CreateIFCElementId(type));
string typeElementType = NamingUtil.GetOverrideStringValue(type, "IfcElementType", typeName);
IList <IFCAnyHandle> repMapListOpt = new List <IFCAnyHandle>();
IFCAnyHandle styleHandle = FamilyExporterUtil.ExportGenericType(exporterIFC, exportType, ifcEnumType, typeGUID, typeName,
typeDescription, applicableOccurence, null, repMapListOpt, typeTag, typeElementType, element, type);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(styleHandle))
{
productWrapper.RegisterHandleWithElementType(type, styleHandle, null);
currentTypeInfo.Style = styleHandle;
ExporterCacheManager.TypeObjectsCache.Register(typeId, false, currentTypeInfo);
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, NamingUtil.CreateIFCObjectName(exporterIFC, element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
bool roomRelated = !FamilyExporterUtil.IsDistributionFlowElementSubType(exportType);
ElementId roomId = ElementId.InvalidElementId;
if (roomRelated)
{
roomId = setter.UpdateRoomRelativeCoordinates(element, out localPlacementToUse);
}
IFCAnyHandle instanceHandle = null;
// For MEP objects
string exportEntityStr = exportType.ToString();
Common.Enums.IFCEntityType exportEntity;
if (String.Compare(exportEntityStr.Substring(exportEntityStr.Length - 4), "Type", true) == 0)
{
exportEntityStr = exportEntityStr.Substring(0, (exportEntityStr.Length - 4));
}
if (Enum.TryParse(exportEntityStr, out exportEntity))
{
// For MEP object creation
instanceHandle = IFCInstanceExporter.CreateGenericIFCEntity(exportEntity, file, instanceGUID, ownerHistory,
instanceName, instanceDescription, instanceObjectType, localPlacementToUse, productRepresentation, instanceTag);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(instanceHandle))
{
return(false);
}
bool relatedToSpace = (roomId != ElementId.InvalidElementId);
productWrapper.AddElement(element, instanceHandle, setter, extraParams, !relatedToSpace);
if (relatedToSpace)
{
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomId, instanceHandle);
}
OpeningUtil.CreateOpeningsIfNecessary(instanceHandle, element, extraParams, null,
exporterIFC, localPlacementToUse, setter, productWrapper);
if (currentTypeInfo.IsValid())
{
ExporterCacheManager.TypeRelationsCache.Add(currentTypeInfo.Style, instanceHandle);
}
if (bodyData != null && bodyData.MaterialIds.Count != 0)
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, instanceHandle, bodyData.MaterialIds);
}
ExporterCacheManager.MEPCache.Register(element, instanceHandle);
tr.Commit();
}
}
}
return(true);
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (roof == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, roof))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// If the roof is an in-place family, we will allow any arbitrary orientation. While this may result in some
// in-place "cubes" exporting with the wrong direction, it is unlikely that an in-place family would be
// used for this reason in the first place.
ecData.PossibleExtrusionAxes = (roof is FamilyInstance) ? IFCExtrusionAxes.TryXYZ : IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
BodyData bodyData;
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ecData.ScaledLength > MathUtil.Eps();
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
//string predefinedType = GetIFCRoofType(ifcEnumType);
string predefinedType = IFCValidateEntry.GetValidIFCPredefinedTypeType(ifcEnumType, "NOTDEFINED", IFCEntityType.IfcRoofType.ToString());
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(exporterIFC, roof, guid, ownerHistory,
localPlacement, exportSlab ? null : representation, predefinedType);
// Export IfcRoofType
IFCExportInfoPair exportInfo = new IFCExportInfoPair(IFCEntityType.IfcRoof, IFCEntityType.IfcRoofType, predefinedType);
if (exportInfo.ExportType != IFCEntityType.UnKnown)
{
string overridePDefType;
if (ParameterUtil.GetStringValueFromElementOrSymbol(roof, "IfcExportType", out overridePDefType) == null) // change IFCType to consistent parameter of IfcExportType
{
if (ParameterUtil.GetStringValueFromElementOrSymbol(roof, "IfcType", out overridePDefType) == null) // support IFCType for legacy support
{
if (string.IsNullOrEmpty(predefinedType))
{
predefinedType = "NOTDEFINED";
}
}
}
if (!string.IsNullOrEmpty(overridePDefType))
{
exportInfo.ValidatedPredefinedType = overridePDefType;
}
else
{
exportInfo.ValidatedPredefinedType = predefinedType;
}
IFCAnyHandle typeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, exportInfo, file, ownerHistory, predefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(typeHnd, roofHnd);
}
productWrapper.AddElement(roof, roofHnd, placementSetter.LevelInfo, ecData, true);
// will export its host object materials later if it is a roof
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, roofHnd, bodyData.MaterialIds);
}
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
string slabName = IFCAnyHandleUtil.GetStringAttribute(roofHnd, "Name") + ":1";
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(exporterIFC, roof, slabGUID, ownerHistory,
slabLocalPlacementHnd, representation, slabRoofPredefinedType);
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, slabName);
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
productWrapper.AddElement(null, slabHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, bodyData.MaterialIds);
// Create type
IFCExportInfoPair slabRoofExportType = new IFCExportInfoPair();
slabRoofExportType.SetValueWithPair(IFCEntityType.IfcSlab);
IFCAnyHandle slabRoofTypeHnd = ExporterUtil.CreateGenericTypeFromElement(roof, slabRoofExportType, exporterIFC.GetFile(), ownerHistory, slabRoofPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(slabRoofTypeHnd, slabHnd);
}
}
tr.Commit();
}
}
}
/// <summary>
/// Exports an element to IfcPile.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportPile(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// NOTE: We expect to incorporate this code into the generic FamilyInstanceExporter at some point.
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
StructuralMemberAxisInfo axisInfo = StructuralMemberExporter.GetStructuralMemberAxisTransform(element);
if (axisInfo != null)
{
ecData.CustomAxis = axisInfo.AxisDirection;
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryCustom;
}
else
{
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
IFCExportInfoPair exportInfo = new IFCExportInfoPair(Common.Enums.IFCEntityType.IfcPile, ifcEnumType);
IFCAnyHandle pile = IFCInstanceExporter.CreatePile(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, ifcEnumType, null);
// TODO: to allow shared geometry for Piles. For now, Pile export will not use shared geometry
if (exportInfo.ExportType != Common.Enums.IFCEntityType.UnKnown)
{
IFCAnyHandle type = ExporterUtil.CreateGenericTypeFromElement(element, exportInfo, file, ExporterCacheManager.OwnerHistoryHandle, exportInfo.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, pile);
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, pile, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, pile, matId);
}
}
productWrapper.AddElement(element, pile, setter, ecData, true, exportInfo);
OpeningUtil.CreateOpeningsIfNecessary(pile, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports an element to IFC footing.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="element">
/// The element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void ExportFooting(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcFooting", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string footingType = GetIFCFootingType(ifcEnumType); // need to keep it for legacy support when original data follows slightly diff naming
footingType = IFCValidateEntry.GetValidIFCType(element, footingType);
IFCAnyHandle footing = IFCInstanceExporter.CreateFooting(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, footingType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, footing, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, footing, matId);
}
}
productWrapper.AddElement(element, footing, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(footing, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports an element to IfcPile.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="ifcEnumType">The string value represents the IFC type.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportPile(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
string ifcEnumType, ProductWrapper productWrapper)
{
// export parts or not
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(setter.LocalPlacement);
IFCAnyHandle prodRep = null;
ElementId matId = ElementId.InvalidElementId;
if (!exportParts)
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
element, catId, geometryElement, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
string instanceGUID = GUIDUtil.CreateGUID(element);
//string pileType = IFCValidateEntry.GetValidIFCPredefinedType(element, ifcEnumType);
IFCAnyHandle pile = IFCInstanceExporter.CreatePile(exporterIFC, element, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
ecData.GetLocalPlacement(), prodRep, ifcEnumType, null);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, pile, productWrapper, setter, setter.LocalPlacement, null);
}
else
{
if (matId != ElementId.InvalidElementId)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, pile, matId);
}
}
productWrapper.AddElement(element, pile, setter, ecData, true);
OpeningUtil.CreateOpeningsIfNecessary(pile, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
tr.Commit();
}
}
/// <summary>
/// Exports an element as IFC covering.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element to be exported.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCovering(ExporterIFC exporterIFC, Element element, GeometryElement geomElem, string ifcEnumType, ProductWrapper productWrapper)
{
bool exportParts = PartExporter.CanExportParts(element);
if (exportParts && !PartExporter.CanExportElementInPartExport(element, element.LevelId, false))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>("IfcCovering", out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
ElementType elemType = element.Document.GetElement(element.GetTypeId()) as ElementType;
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction transaction = new IFCTransaction(file))
{
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ElementId categoryId = CategoryUtil.GetSafeCategoryId(element);
IFCAnyHandle prodRep = null;
if (!exportParts)
{
ecData.SetLocalPlacement(setter.LocalPlacement);
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
prodRep = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, element,
categoryId, geomElem, bodyExporterOptions, null, ecData, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodRep))
{
ecData.ClearOpenings();
return;
}
}
// We will use the category of the element to set a default value for the covering.
string defaultCoveringEnumType = null;
if (categoryId == new ElementId(BuiltInCategory.OST_Ceilings))
{
defaultCoveringEnumType = "CEILING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Floors))
{
defaultCoveringEnumType = "FLOORING";
}
else if (categoryId == new ElementId(BuiltInCategory.OST_Roofs))
{
defaultCoveringEnumType = "ROOFING";
}
string instanceGUID = GUIDUtil.CreateGUID(element);
string instanceName = NamingUtil.GetNameOverride(element, NamingUtil.GetIFCName(element));
string instanceDescription = NamingUtil.GetDescriptionOverride(element, null);
string instanceObjectType = NamingUtil.GetObjectTypeOverride(element, exporterIFC.GetFamilyName());
string instanceTag = NamingUtil.GetTagOverride(element, NamingUtil.CreateIFCElementId(element));
string coveringType = IFCValidateEntry.GetValidIFCType(element, ifcEnumType, defaultCoveringEnumType);
IFCAnyHandle covering = IFCInstanceExporter.CreateCovering(file, instanceGUID, ExporterCacheManager.OwnerHistoryHandle,
instanceName, instanceDescription, instanceObjectType, setter.LocalPlacement, prodRep, instanceTag, coveringType);
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, element, covering, productWrapper, setter, setter.LocalPlacement, null);
}
bool containInSpace = false;
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
// Ceiling containment in Space is generally required and not specific to any view
if (ExporterCacheManager.CeilingSpaceRelCache.ContainsKey(element.Id))
{
IList <ElementId> roomlist = ExporterCacheManager.CeilingSpaceRelCache[element.Id];
// Process Ceiling to be contained in a Space only when it is exactly bounding one Space
if (roomlist.Count == 1)
{
productWrapper.AddElement(element, covering, setter, null, false);
// Modify the Ceiling placement to be relative to the Space that it bounds
IFCAnyHandle roomPlacement = IFCAnyHandleUtil.GetObjectPlacement(ExporterCacheManager.SpaceInfoCache.FindSpaceHandle(roomlist[0]));
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(roomPlacement, localPlacementToUse);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle relLocalPlacement = ExporterUtil.CreateAxis2Placement3D(file, inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
IFCAnyHandleUtil.SetAttribute(localPlacementToUse, "PlacementRelTo", roomPlacement);
GeometryUtil.SetRelativePlacement(localPlacementToUse, relLocalPlacement);
ExporterCacheManager.SpaceInfoCache.RelateToSpace(roomlist[0], covering);
containInSpace = true;
}
}
// if not contained in Space, assign it to default containment in Level
if (!containInSpace)
{
productWrapper.AddElement(element, covering, setter, null, true);
}
if (!exportParts)
{
Ceiling ceiling = element as Ceiling;
if (ceiling != null)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, ceiling, covering,
geomElem, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, null);
}
else
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geomElem, exporterIFC, element);
CategoryUtil.CreateMaterialAssociation(exporterIFC, covering, matId);
}
}
OpeningUtil.CreateOpeningsIfNecessary(covering, element, ecData, null,
exporterIFC, ecData.GetLocalPlacement(), setter, productWrapper);
}
}
transaction.Commit();
}
}
/// <summary>
/// Exports a floor to IFC slab.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="floor">
/// The floor element.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="ifcEnumType">
/// The string value represents the IFC type.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
/// <param name="exportParts">
/// Whether to export parts or not.
/// </param>
/// <returns>
/// True if the floor is exported successfully, false otherwise.
/// </returns>
public static void ExportFloor(ExporterIFC exporterIFC, Element floorElement, GeometryElement geometryElement, string ifcEnumType,
ProductWrapper productWrapper, bool exportParts)
{
if (geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, floorElement, null, null, ExporterUtil.GetBaseLevelIdForElement(floorElement)))
{
IFCAnyHandle localPlacement = placementSetter.GetPlacement();
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
bool exportedAsInternalExtrusion = false;
double scale = exporterIFC.LinearScale;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (!exportParts)
{
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
if (floorElement is Floor)
{
Floor floor = floorElement as Floor;
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floor.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floor,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.TessellationLevel = BodyExporter.GetTessellationLevel();
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Allow export as IfcSlab or IfcFooting. Ignore altIfcEnumType value; use value passed in.
string altIfcEnumType;
IFCExportType exportAs = ExporterUtil.GetExportType(exporterIFC, floorElement, out altIfcEnumType);
bool exportAsFooting = (exportAs == IFCExportType.ExportFooting);
IFCFootingType?footingType = null;
IFCSlabType? slabType = null;
if (exportAsFooting)
{
footingType = FootingExporter.GetIFCFootingType(ifcEnumType);
}
else
{
slabType = GetIFCSlabType(ifcEnumType);
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
if (exportAsFooting)
{
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, footingType.Value);
}
else
{
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, slabType.Value);
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (floorElement is HostObject)
{
HostObject hostObject = floorElement as HostObject;
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, hostObject, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
else if (floorElement is FamilyInstance && slabHnds.Count > 0)
{
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, floorElement);
Document doc = floorElement.Document;
foreach (IFCAnyHandle slabHnd in slabHnds)
{
CategoryUtil.CreateMaterialAssociation(exporterIFC, slabHnd, matId);
}
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportInfoPair exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
IFCAnyHandle type = null;
MaterialLayerSetInfo layersetInfo = null;
if (!ElementFilteringUtil.IsElementVisible(floorElement))
{
return;
}
// Check the intended IFC entity or type name is in the exclude list specified in the UI
Common.Enums.IFCEntityType elementClassTypeEnum;
if (Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportInstance.ToString(), out elementClassTypeEnum) ||
Enum.TryParse <Common.Enums.IFCEntityType>(exportType.ExportType.ToString(), out elementClassTypeEnum))
{
if (ExporterCacheManager.ExportOptionsCache.IsElementInExcludeList(elementClassTypeEnum))
{
return;
}
}
Document doc = floorElement.Document;
using (SubTransaction tempPartTransaction = new SubTransaction(doc))
{
// For IFC4RV export, Floor will be split into its parts(temporarily) in order to export the floor by its parts
bool exportByComponents = ExporterUtil.ShouldExportByComponents(floorElement, exportParts);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
// Try to export the Floor slab as a container. If that succeeds, we are done.
// If we do export the floor as a container, it will take care of the local placement and transform there, so we need to leave
// this out of the IFCTransformSetter and PlacementSetter scopes below, or else we'll get double transforms.
IFCAnyHandle floorHnd = RoofExporter.ExportRoofOrFloorAsContainer(exporterIFC, floorElement, geometryElement, productWrapper);
if (!IFCAnyHandleUtil.IsNullOrHasNoValue(floorHnd))
{
tr.Commit();
return;
}
}
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, floorElement, out overrideContainerHnd);
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// Next, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
IList <GeometryObject> gObjs = FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(floorElement.Document, exporterIFC, ref solids, ref meshes);
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go through the Revit model origin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorBasePlane = GeometryUtil.CreatePlaneByNormalAtOrigin(floorDir);
GenerateAdditionalInfo additionalInfo = GenerateAdditionalInfo.GenerateBody;
additionalInfo |= ExporterCacheManager.ExportOptionsCache.ExportAs4 ?
GenerateAdditionalInfo.GenerateFootprint : GenerateAdditionalInfo.None;
// Skip generate body item for IFC4RV. It will be handled later in PartExporter.ExportHostPartAsShapeAspects()
if (exportByComponents)
{
additionalInfo &= ~GenerateAdditionalInfo.GenerateBody;
}
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorBasePlane, floorOrigin, floorExtrusionDirection, null, out completelyClipped,
addInfo: additionalInfo);
if (completelyClipped)
{
return;
}
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
if (floorAndProperties.Handle != null)
{
representations.Add(floorAndProperties.Handle);
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
// Footprint representation will only be exported in export to IFC4
if (((additionalInfo & GenerateAdditionalInfo.GenerateFootprint) != 0) && (floorAndProperties.FootprintInfo != null))
{
IFCAnyHandle footprintShapeRep = floorAndProperties.FootprintInfo.CreateFootprintShapeRepresentation(exporterIFC);
representations.Add(footprintShapeRep);
}
if (exportByComponents)
{
IFCAnyHandle prodRep = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, representations);
prodReps.Add(prodRep);
}
else if (representations.Count > 0 && floorAndProperties.Handle != null) // Only when at least the body rep exists will come here
{
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
}
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion && !exportByComponents)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
PotentiallyFixPresentationLayerAssignment(floorElement, prodReps);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
// Footprint representation will only be exported in export to IFC4
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
if (extrusionLoops.Count > ii)
{
if (extrusionLoops[ii].Count > 0)
{
// Get the extrusion footprint using the first Curveloop. Transform needs to be obtained from the returned local placement
Transform lcs = ExporterIFCUtils.GetUnscaledTransform(exporterIFC, localPlacements[ii]);
IFCAnyHandle footprintGeomRepItem = GeometryUtil.CreateIFCCurveFromCurveLoop(exporterIFC, extrusionLoops[ii][0], lcs, floorPlane.Normal);
IFCAnyHandle contextOfItemsFootprint = exporterIFC.Get3DContextHandle("FootPrint");
ISet <IFCAnyHandle> repItem = new HashSet <IFCAnyHandle>();
repItem.Add(footprintGeomRepItem);
IFCAnyHandle footprintShapeRepresentation = RepresentationUtil.CreateBaseShapeRepresentation(exporterIFC, contextOfItemsFootprint, "FootPrint", "Curve2D", repItem);
IList <IFCAnyHandle> reps = new List <IFCAnyHandle>();
reps.Add(footprintShapeRepresentation);
IFCAnyHandleUtil.AddRepresentations(prodReps[ii], reps);
}
}
}
}
}
IFCAnyHandle prodDefHnd;
if (prodReps.Count == 0)
{
if (exportByComponents)
{
prodDefHnd = RepresentationUtil.CreateProductDefinitionShapeWithoutBodyRep(exporterIFC, floorElement, catId, geometryElement, null);
prodReps.Add(prodDefHnd);
}
else
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
// Brep representation using tesellation after ExportSlabAsExtrusion does not return prodReps
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
// Deal with a couple of cases that have non-standard defaults.
switch (exportType.ExportInstance)
{
case IFCEntityType.IfcCovering:
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCEntityType.IfcSlab:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
exportType.ValidatedPredefinedType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
slabHnd = IFCInstanceExporter.CreateGenericIFCEntity(exportType, exporterIFC, floorElement, currentGUID, ownerHistory,
localPlacementHnd, exportParts ? null : prodReps[ii]);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (!string.IsNullOrEmpty(ifcName))
{
IFCAnyHandleUtil.OverrideNameAttribute(slabHnd, ifcName);
}
// Pre IFC4 Slab does not have PredefinedType
if (!string.IsNullOrEmpty(exportType.ValidatedPredefinedType) && !ExporterCacheManager.ExportOptionsCache.ExportAsOlderThanIFC4)
{
IFCAnyHandleUtil.SetAttribute(slabHnd, "PredefinedType", exportType.ValidatedPredefinedType, true);
}
if (exportParts && !ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
else if (exportByComponents)
{
IFCExtrusionCreationData partECData = new IFCExtrusionCreationData();
IFCAnyHandle hostShapeRepFromParts = PartExporter.ExportHostPartAsShapeAspects(exporterIFC, floorElement, prodReps[ii],
productWrapper, placementSetter, localPlacement, ElementId.InvalidElementId, out layersetInfo, partECData);
loopExtraParams.Add(partECData);
}
slabHnds.Add(slabHnd);
// For IFC4RV, export of the geometry is already handled in PartExporter.ExportHostPartAsShapeAspects()
if (!exportParts && !exportByComponents)
{
if (repTypes[ii] == ShapeRepresentationType.Brep || repTypes[ii] == ShapeRepresentationType.Tessellation)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true, exportType);
type = ExporterUtil.CreateGenericTypeFromElement(floorElement, exportType, file, ownerHistory, exportType.ValidatedPredefinedType, productWrapper);
ExporterCacheManager.TypeRelationsCache.Add(type, slabHnds[ii]);
ExporterUtil.AddIntoComplexPropertyCache(slabHnds[ii], layersetInfo);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ISet <IFCAnyHandle> oldCreatedObjects = productWrapper.GetAllObjects();
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
ISet <IFCAnyHandle> newCreatedObjects = productWrapper.GetAllObjects();
newCreatedObjects.ExceptWith(oldCreatedObjects);
PotentiallyFixPresentationLayerAssignment(floorElement, newCreatedObjects);
}
}
if (!exportParts)
{
if (ExporterCacheManager.ExportOptionsCache.ExportAs4ReferenceView)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, productWrapper.GetAnElement(),
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
else
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false, type);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true, type);
}
}
}
}
tr.Commit();
return;
}
}
}
/// <summary>
/// Exports mullion.
/// </summary>
/// <param name="exporterIFC">
/// The ExporterIFC object.
/// </param>
/// <param name="mullion">
/// The mullion object.
/// </param>
/// <param name="geometryElement">
/// The geometry element.
/// </param>
/// <param name="localPlacement">
/// The local placement handle.
/// </param>
/// <param name="setter">
/// The PlacementSetter.
/// </param>
/// <param name="productWrapper">
/// The ProductWrapper.
/// </param>
public static void Export(ExporterIFC exporterIFC, Mullion mullion, GeometryElement geometryElement,
IFCAnyHandle localPlacement, PlacementSetter setter, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (PlacementSetter mullionSetter = PlacementSetter.Create(exporterIFC, mullion))
{
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
IFCAnyHandle mullionPlacement = mullionSetter.LocalPlacement;
Transform relTrf = ExporterIFCUtils.GetRelativeLocalPlacementOffsetTransform(localPlacement, mullionPlacement);
Transform inverseTrf = relTrf.Inverse;
IFCAnyHandle mullionLocalPlacement = ExporterUtil.CreateLocalPlacement(file, localPlacement,
inverseTrf.Origin, inverseTrf.BasisZ, inverseTrf.BasisX);
extraParams.SetLocalPlacement(mullionLocalPlacement);
Transform extrusionLCS = null;
// Add a custom direction for trying to create an extrusion based on the base curve of the mullion, if it is a line and not an arc.
Curve baseCurve = mullion.LocationCurve;
if ((baseCurve != null) && (baseCurve is Line))
{
// We won't use curveBounds and origin yet; just need the axis for now.
IFCRange curveBounds;
XYZ origin, mullionDirection;
GeometryUtil.GetAxisAndRangeFromCurve(baseCurve, out curveBounds, out mullionDirection, out origin);
// approx 1.0/sqrt(2.0)
XYZ planeY = (Math.Abs(mullionDirection.Z) < 0.707) ? XYZ.BasisZ.CrossProduct(mullionDirection) : XYZ.BasisX.CrossProduct(mullionDirection);
planeY.Normalize();
XYZ projDir = mullionDirection.CrossProduct(planeY);
extrusionLCS = Transform.Identity;
extrusionLCS.BasisX = mullionDirection; extrusionLCS.BasisY = planeY; extrusionLCS.BasisZ = projDir; extrusionLCS.Origin = origin;
}
ElementId catId = CategoryUtil.GetSafeCategoryId(mullion);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
bodyExporterOptions.ExtrusionLocalCoordinateSystem = extrusionLCS;
IFCAnyHandle repHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, mullion, catId,
geometryElement, bodyExporterOptions, null, extraParams, true);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(repHnd))
{
extraParams.ClearOpenings();
return;
}
string elemGUID = GUIDUtil.CreateGUID(mullion);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string elemObjectType = NamingUtil.CreateIFCObjectName(exporterIFC, mullion);
string name = NamingUtil.GetNameOverride(mullion, elemObjectType);
string description = NamingUtil.GetDescriptionOverride(mullion, null);
string objectType = NamingUtil.GetObjectTypeOverride(mullion, elemObjectType);
string elemTag = NamingUtil.GetTagOverride(mullion, NamingUtil.CreateIFCElementId(mullion));
IFCAnyHandle mullionHnd = IFCInstanceExporter.CreateMember(file, elemGUID, ownerHistory, name, description, objectType,
mullionLocalPlacement, repHnd, elemTag, "MULLION");
ExporterCacheManager.HandleToElementCache.Register(mullionHnd, mullion.Id);
productWrapper.AddElement(mullion, mullionHnd, mullionSetter, extraParams, false);
ElementId matId = BodyExporter.GetBestMaterialIdFromGeometryOrParameter(geometryElement, exporterIFC, mullion);
CategoryUtil.CreateMaterialAssociation(exporterIFC, mullionHnd, matId);
}
}
}
/// <summary>
/// Exports a CeilingAndFloor element to IFC.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="floor">The floor element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportCeilingAndFloorElement(ExporterIFC exporterIFC, CeilingAndFloor floorElement, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (geometryElement == null)
{
return;
}
// export parts or not
bool exportParts = PartExporter.CanExportParts(floorElement);
if (exportParts && !PartExporter.CanExportElementInPartExport(floorElement, floorElement.LevelId, false))
{
return;
}
IFCFile file = exporterIFC.GetFile();
string ifcEnumType;
IFCExportType exportType = ExporterUtil.GetExportType(exporterIFC, floorElement, out ifcEnumType);
using (IFCTransaction tr = new IFCTransaction(file))
{
bool canExportAsContainerOrWithExtrusionAnalyzer = (!exportParts && (floorElement is Floor));
IList <IFCAnyHandle> slabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> brepSlabHnds = new List <IFCAnyHandle>();
IList <IFCAnyHandle> nonBrepSlabHnds = new List <IFCAnyHandle>();
using (IFCTransformSetter transformSetter = IFCTransformSetter.Create())
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, floorElement))
{
IFCAnyHandle localPlacement = placementSetter.LocalPlacement;
IFCAnyHandle ownerHistory = ExporterCacheManager.OwnerHistoryHandle;
// The routine ExportExtrudedSlabOpenings is called if exportedAsInternalExtrusion is true, and it requires having a valid level association.
// Disable calling ExportSlabAsExtrusion if we can't handle potential openings.
bool canExportAsInternalExtrusion = placementSetter.LevelInfo != null;
bool exportedAsInternalExtrusion = false;
ElementId catId = CategoryUtil.GetSafeCategoryId(floorElement);
IList <IFCAnyHandle> prodReps = new List <IFCAnyHandle>();
IList <ShapeRepresentationType> repTypes = new List <ShapeRepresentationType>();
IList <IList <CurveLoop> > extrusionLoops = new List <IList <CurveLoop> >();
IList <IFCExtrusionCreationData> loopExtraParams = new List <IFCExtrusionCreationData>();
Plane floorPlane = GeometryUtil.CreateDefaultPlane();
IList <IFCAnyHandle> localPlacements = new List <IFCAnyHandle>();
if (canExportAsContainerOrWithExtrusionAnalyzer)
{
Floor floor = floorElement as Floor;
// First, try to use the ExtrusionAnalyzer for the limited cases it handles - 1 solid, no openings, end clippings only.
// Also limited to cases with line and arc boundaries.
//
SolidMeshGeometryInfo solidMeshInfo = GeometryUtil.GetSplitSolidMeshGeometry(geometryElement);
IList <Solid> solids = solidMeshInfo.GetSolids();
IList <Mesh> meshes = solidMeshInfo.GetMeshes();
if (solids.Count == 1 && meshes.Count == 0)
{
bool completelyClipped;
// floorExtrusionDirection is set to (0, 0, -1) because extrusionAnalyzerFloorPlane is computed from the top face of the floor
XYZ floorExtrusionDirection = new XYZ(0, 0, -1);
XYZ modelOrigin = XYZ.Zero;
XYZ floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
if (floorOrigin == null)
{
// GetVerticalProjectionPoint may return null if FloorFace.Top is an edited face that doesn't
// go thruough te Revit model orgigin. We'll try the midpoint of the bounding box instead.
BoundingBoxXYZ boundingBox = floorElement.get_BoundingBox(null);
modelOrigin = (boundingBox.Min + boundingBox.Max) / 2.0;
floorOrigin = floor.GetVerticalProjectionPoint(modelOrigin, FloorFace.Top);
}
if (floorOrigin != null)
{
XYZ floorDir = floor.GetNormalAtVerticalProjectionPoint(floorOrigin, FloorFace.Top);
Plane extrusionAnalyzerFloorPlane = new Plane(floorDir, floorOrigin);
HandleAndData floorAndProperties =
ExtrusionExporter.CreateExtrusionWithClippingAndProperties(exporterIFC, floorElement,
catId, solids[0], extrusionAnalyzerFloorPlane, floorExtrusionDirection, null, out completelyClipped);
if (completelyClipped)
{
return;
}
if (floorAndProperties.Handle != null)
{
IList <IFCAnyHandle> representations = new List <IFCAnyHandle>();
representations.Add(floorAndProperties.Handle);
IFCAnyHandle prodRep = IFCInstanceExporter.CreateProductDefinitionShape(file, null, null, representations);
prodReps.Add(prodRep);
repTypes.Add(ShapeRepresentationType.SweptSolid);
if (floorAndProperties.Data != null)
{
loopExtraParams.Add(floorAndProperties.Data);
}
}
}
}
}
// Use internal routine as backup that handles openings.
if (prodReps.Count == 0 && canExportAsInternalExtrusion)
{
exportedAsInternalExtrusion = ExporterIFCUtils.ExportSlabAsExtrusion(exporterIFC, floorElement,
geometryElement, transformSetter, localPlacement, out localPlacements, out prodReps,
out extrusionLoops, out loopExtraParams, floorPlane);
for (int ii = 0; ii < prodReps.Count; ii++)
{
// all are extrusions
repTypes.Add(ShapeRepresentationType.SweptSolid);
}
}
if (prodReps.Count == 0)
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.Medium);
BodyData bodyData;
IFCAnyHandle prodDefHnd = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
floorElement, catId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(prodDefHnd))
{
ecData.ClearOpenings();
return;
}
prodReps.Add(prodDefHnd);
repTypes.Add(bodyData.ShapeRepresentationType);
}
}
// Create the slab from either the extrusion or the BRep information.
string ifcGUID = GUIDUtil.CreateGUID(floorElement);
int numReps = exportParts ? 1 : prodReps.Count;
string entityType = null;
switch (exportType)
{
case IFCExportType.IfcFooting:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCFootingType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCFootingType>(floorElement, ifcEnumType, null);
}
break;
case IFCExportType.IfcCovering:
entityType = IFCValidateEntry.GetValidIFCType <IFCCoveringType>(floorElement, ifcEnumType, "FLOORING");
break;
case IFCExportType.IfcRamp:
if (ExporterCacheManager.ExportOptionsCache.ExportAs4)
{
entityType = IFCValidateEntry.GetValidIFCType <Revit.IFC.Export.Toolkit.IFC4.IFCRampType>(floorElement, ifcEnumType, null);
}
else
{
entityType = IFCValidateEntry.GetValidIFCType <IFCRampType>(floorElement, ifcEnumType, null);
}
break;
default:
bool isBaseSlab = false;
AnalyticalModel analyticalModel = floorElement.GetAnalyticalModel();
if (analyticalModel != null)
{
AnalyzeAs slabFoundationType = analyticalModel.GetAnalyzeAs();
isBaseSlab = (slabFoundationType == AnalyzeAs.SlabOnGrade) || (slabFoundationType == AnalyzeAs.Mat);
}
entityType = IFCValidateEntry.GetValidIFCType <IFCSlabType>(floorElement, ifcEnumType, isBaseSlab ? "BASESLAB" : "FLOOR");
break;
}
for (int ii = 0; ii < numReps; ii++)
{
string ifcName = NamingUtil.GetNameOverride(floorElement, NamingUtil.GetIFCNamePlusIndex(floorElement, ii == 0 ? -1 : ii + 1));
string ifcDescription = NamingUtil.GetDescriptionOverride(floorElement, null);
string ifcObjectType = NamingUtil.GetObjectTypeOverride(floorElement, exporterIFC.GetFamilyName());
string ifcTag = NamingUtil.GetTagOverride(floorElement, NamingUtil.CreateIFCElementId(floorElement));
string currentGUID = (ii == 0) ? ifcGUID : GUIDUtil.CreateGUID();
IFCAnyHandle localPlacementHnd = exportedAsInternalExtrusion ? localPlacements[ii] : localPlacement;
IFCAnyHandle slabHnd = null;
// TODO: replace with CreateGenericBuildingElement.
switch (exportType)
{
case IFCExportType.IfcFooting:
slabHnd = IFCInstanceExporter.CreateFooting(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcCovering:
slabHnd = IFCInstanceExporter.CreateCovering(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
case IFCExportType.IfcRamp:
slabHnd = IFCInstanceExporter.CreateRamp(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
default:
slabHnd = IFCInstanceExporter.CreateSlab(file, currentGUID, ownerHistory, ifcName,
ifcDescription, ifcObjectType, localPlacementHnd, exportParts ? null : prodReps[ii],
ifcTag, entityType);
break;
}
if (IFCAnyHandleUtil.IsNullOrHasNoValue(slabHnd))
{
return;
}
if (exportParts)
{
PartExporter.ExportHostPart(exporterIFC, floorElement, slabHnd, productWrapper, placementSetter, localPlacementHnd, null);
}
slabHnds.Add(slabHnd);
if (!exportParts)
{
if (repTypes[ii] == ShapeRepresentationType.Brep)
{
brepSlabHnds.Add(slabHnd);
}
else
{
nonBrepSlabHnds.Add(slabHnd);
}
}
}
for (int ii = 0; ii < numReps; ii++)
{
IFCExtrusionCreationData loopExtraParam = ii < loopExtraParams.Count ? loopExtraParams[ii] : null;
productWrapper.AddElement(floorElement, slabHnds[ii], placementSetter, loopExtraParam, true);
}
// This call to the native function appears to create Brep opening also when appropriate. But the creation of the IFC instances is not
// controllable from the managed code. Therefore in some cases BRep geometry for Opening will still be exported even in the Reference View
if (exportedAsInternalExtrusion)
{
ExporterIFCUtils.ExportExtrudedSlabOpenings(exporterIFC, floorElement, placementSetter.LevelInfo,
localPlacements[0], slabHnds, extrusionLoops, floorPlane, productWrapper.ToNative());
}
}
if (!exportParts)
{
if (nonBrepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, nonBrepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, false);
}
if (brepSlabHnds.Count > 0)
{
HostObjectExporter.ExportHostObjectMaterials(exporterIFC, floorElement, brepSlabHnds,
geometryElement, productWrapper, ElementId.InvalidElementId, Toolkit.IFCLayerSetDirection.Axis3, true);
}
}
}
tr.Commit();
return;
}
}
/// <summary>
/// Exports a MEP family instance.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="element">The element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="exportType">The export type of the element.
/// <param name="ifcEnumType">The sub-type of the element.</param></param>
/// <param name="productWrapper">The ProductWrapper.</param>
/// <returns>True if an entity was created, false otherwise.</returns>
public static bool Export(ExporterIFC exporterIFC, Element element, GeometryElement geometryElement,
IFCExportInfoPair exportType, string ifcEnumType, ProductWrapper productWrapper)
{
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
// CQ_TODO: Clean up this code by at least factoring it out.
// If we are exporting a duct segment, we may need to split it into parts by level. Create a list of ranges.
IList <ElementId> levels = new List <ElementId>();
IList <IFCRange> ranges = new List <IFCRange>();
// We will not split duct segments if the assemblyId is set, as we would like to keep the original duct segment
// associated with the assembly, on the level of the assembly.
if ((exportType.ExportType == IFCEntityType.IfcDuctSegmentType) &&
(ExporterCacheManager.ExportOptionsCache.WallAndColumnSplitting) &&
(element.AssemblyInstanceId == ElementId.InvalidElementId))
{
LevelUtil.CreateSplitLevelRangesForElement(exporterIFC, exportType, element, out levels,
out ranges);
}
int numPartsToExport = ranges.Count;
{
ElementId catId = CategoryUtil.GetSafeCategoryId(element);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true, ExportOptionsCache.ExportTessellationLevel.ExtraLow);
if (0 == numPartsToExport)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ElementId overrideContainerId = ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, overrideContainerId, overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
BodyData bodyData = null;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
extraParams.SetLocalPlacement(localPlacementToUse);
IFCAnyHandle productRepresentation =
RepresentationUtil.CreateAppropriateProductDefinitionShape(
exporterIFC, element, catId, geometryElement, bodyExporterOptions, null, extraParams, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType, extraParams,
setter, localPlacementToUse, productRepresentation,
productWrapper);
}
}
}
else
{
for (int ii = 0; ii < numPartsToExport; ii++)
{
// Check for containment override
IFCAnyHandle overrideContainerHnd = null;
ParameterUtil.OverrideContainmentParameter(exporterIFC, element, out overrideContainerHnd);
using (PlacementSetter setter = PlacementSetter.Create(exporterIFC, element, null, null, levels[ii], overrideContainerHnd))
{
IFCAnyHandle localPlacementToUse = setter.LocalPlacement;
using (IFCExtrusionCreationData extraParams = new IFCExtrusionCreationData())
{
SolidMeshGeometryInfo solidMeshCapsule =
GeometryUtil.GetClippedSolidMeshGeometry(geometryElement, ranges[ii]);
IList <Solid> solids = solidMeshCapsule.GetSolids();
IList <Mesh> polyMeshes = solidMeshCapsule.GetMeshes();
IList <GeometryObject> geomObjects =
FamilyExporterUtil.RemoveInvisibleSolidsAndMeshes(element.Document,
exporterIFC, ref solids, ref polyMeshes);
if (geomObjects.Count == 0 && (solids.Count > 0 || polyMeshes.Count > 0))
{
return(false);
}
bool tryToExportAsExtrusion = (!exporterIFC.ExportAs2x2 ||
(exportType.ExportInstance == IFCEntityType.IfcColumn));
if (exportType.ExportInstance == IFCEntityType.IfcColumn)
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
}
else
{
extraParams.PossibleExtrusionAxes = IFCExtrusionAxes.TryXYZ;
}
BodyData bodyData = null;
if (geomObjects.Count > 0)
{
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId, geomObjects,
bodyExporterOptions, extraParams);
}
else
{
IList <GeometryObject> exportedGeometries = new List <GeometryObject>();
exportedGeometries.Add(geometryElement);
bodyData = BodyExporter.ExportBody(exporterIFC, element, catId,
ElementId.InvalidElementId,
exportedGeometries, bodyExporterOptions,
extraParams);
}
List <IFCAnyHandle> bodyReps = new List <IFCAnyHandle>();
bodyReps.Add(bodyData.RepresentationHnd);
IFCAnyHandle productRepresentation =
IFCInstanceExporter.CreateProductDefinitionShape(exporterIFC.GetFile(), null,
null, bodyReps);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(productRepresentation))
{
extraParams.ClearOpenings();
return(false);
}
ExportAsMappedItem(exporterIFC, element, file, exportType, ifcEnumType,
extraParams, setter, localPlacementToUse,
productRepresentation, productWrapper);
}
}
}
}
}
tr.Commit();
}
return(true);
}
/// <summary>
/// Exports a ramp to IfcRamp, without decomposing into separate runs and landings.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The ramp type.</param>
/// <param name="ramp">The ramp element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="numFlights">The number of flights for a multistory ramp.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRamp(ExporterIFC exporterIFC, string ifcEnumType, Element ramp, GeometryElement geometryElement,
int numFlights, ProductWrapper productWrapper)
{
if (ramp == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (PlacementSetter placementSetter = PlacementSetter.Create(exporterIFC, ramp))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.SetLocalPlacement(placementSetter.LocalPlacement);
ecData.ReuseLocalPlacement = false;
GeometryElement rampGeom = GeometryUtil.GetOneLevelGeometryElement(geometryElement, numFlights);
BodyData bodyData;
ElementId categoryId = CategoryUtil.GetSafeCategoryId(ramp);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions();
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC,
ramp, categoryId, rampGeom, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
string containedRampGuid = GUIDUtil.CreateSubElementGUID(ramp, (int)IFCRampSubElements.ContainedRamp);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string rampName = NamingUtil.GetNameOverride(ramp, NamingUtil.GetIFCName(ramp));
string rampDescription = NamingUtil.GetDescriptionOverride(ramp, null);
string rampObjectType = NamingUtil.GetObjectTypeOverride(ramp, NamingUtil.CreateIFCObjectName(exporterIFC, ramp));
IFCAnyHandle containedRampLocalPlacement = ExporterUtil.CreateLocalPlacement(file, ecData.GetLocalPlacement(), null);
string elementTag = NamingUtil.GetTagOverride(ramp, NamingUtil.CreateIFCElementId(ramp));
string rampType = GetIFCRampType(ifcEnumType);
List <IFCAnyHandle> components = new List <IFCAnyHandle>();
IList <IFCExtrusionCreationData> componentExtrusionData = new List <IFCExtrusionCreationData>();
IFCAnyHandle containedRampHnd = IFCInstanceExporter.CreateRamp(file, containedRampGuid, ownerHistory, rampName,
rampDescription, rampObjectType, containedRampLocalPlacement, representation, elementTag, rampType);
components.Add(containedRampHnd);
componentExtrusionData.Add(ecData);
//productWrapper.AddElement(containedRampHnd, placementSetter.LevelInfo, ecData, false);
CategoryUtil.CreateMaterialAssociations(exporterIFC, containedRampHnd, bodyData.MaterialIds);
string guid = GUIDUtil.CreateGUID(ramp);
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
IFCAnyHandle rampHnd = IFCInstanceExporter.CreateRamp(file, guid, ownerHistory, rampName,
rampDescription, rampObjectType, localPlacement, null, elementTag, rampType);
productWrapper.AddElement(ramp, rampHnd, placementSetter.LevelInfo, ecData, true);
StairRampContainerInfo stairRampInfo = new StairRampContainerInfo(rampHnd, components, localPlacement);
ExporterCacheManager.StairRampContainerInfoCache.AddStairRampContainerInfo(ramp.Id, stairRampInfo);
ExportMultistoryRamp(exporterIFC, ramp, numFlights, rampHnd, components, componentExtrusionData, placementSetter,
productWrapper);
}
tr.Commit();
}
}
}
/// <summary>
/// Exports a roof to IfcRoof.
/// </summary>
/// <param name="exporterIFC">The ExporterIFC object.</param>
/// <param name="ifcEnumType">The roof type.</param>
/// <param name="roof">The roof element.</param>
/// <param name="geometryElement">The geometry element.</param>
/// <param name="productWrapper">The ProductWrapper.</param>
public static void ExportRoof(ExporterIFC exporterIFC, string ifcEnumType, Element roof, GeometryElement geometryElement,
ProductWrapper productWrapper)
{
if (roof == null || geometryElement == null)
{
return;
}
IFCFile file = exporterIFC.GetFile();
using (IFCTransaction tr = new IFCTransaction(file))
{
using (IFCPlacementSetter placementSetter = IFCPlacementSetter.Create(exporterIFC, roof, null, null, ExporterUtil.GetBaseLevelIdForElement(roof)))
{
using (IFCExtrusionCreationData ecData = new IFCExtrusionCreationData())
{
ecData.PossibleExtrusionAxes = IFCExtrusionAxes.TryZ;
ecData.AreInnerRegionsOpenings = true;
ecData.SetLocalPlacement(placementSetter.GetPlacement());
ElementId categoryId = CategoryUtil.GetSafeCategoryId(roof);
BodyExporterOptions bodyExporterOptions = new BodyExporterOptions(true);
BodyData bodyData;
IFCAnyHandle representation = RepresentationUtil.CreateAppropriateProductDefinitionShape(exporterIFC, roof,
categoryId, geometryElement, bodyExporterOptions, null, ecData, out bodyData);
if (IFCAnyHandleUtil.IsNullOrHasNoValue(representation))
{
ecData.ClearOpenings();
return;
}
bool exportSlab = ecData.ScaledLength > MathUtil.Eps();
string guid = GUIDUtil.CreateGUID(roof);
IFCAnyHandle ownerHistory = exporterIFC.GetOwnerHistoryHandle();
string roofName = NamingUtil.GetNameOverride(roof, NamingUtil.GetIFCName(roof));
string roofDescription = NamingUtil.GetDescriptionOverride(roof, null);
string roofObjectType = NamingUtil.GetObjectTypeOverride(roof, NamingUtil.CreateIFCObjectName(exporterIFC, roof));
IFCAnyHandle localPlacement = ecData.GetLocalPlacement();
string elementTag = NamingUtil.GetTagOverride(roof, NamingUtil.CreateIFCElementId(roof));
IFCRoofType roofType = GetIFCRoofType(ifcEnumType);
IFCAnyHandle roofHnd = IFCInstanceExporter.CreateRoof(file, guid, ownerHistory, roofName, roofDescription,
roofObjectType, localPlacement, exportSlab ? null : representation, elementTag, roofType);
productWrapper.AddElement(roof, roofHnd, placementSetter.GetLevelInfo(), ecData, true);
// will export its host object materials later if it is a roof
if (!(roof is RoofBase))
{
CategoryUtil.CreateMaterialAssociations(exporterIFC, roofHnd, bodyData.MaterialIds);
}
if (exportSlab)
{
string slabGUID = GUIDUtil.CreateSubElementGUID(roof, (int)IFCRoofSubElements.RoofSlabStart);
string slabName = roofName + ":1";
IFCAnyHandle slabLocalPlacementHnd = ExporterUtil.CopyLocalPlacement(file, localPlacement);
IFCAnyHandle slabHnd = IFCInstanceExporter.CreateSlab(file, slabGUID, ownerHistory, slabName,
roofDescription, roofObjectType, slabLocalPlacementHnd, representation, elementTag, IFCSlabType.Roof);
Transform offsetTransform = (bodyData != null) ? bodyData.OffsetTransform : Transform.Identity;
OpeningUtil.CreateOpeningsIfNecessary(slabHnd, roof, ecData, offsetTransform,
exporterIFC, slabLocalPlacementHnd, placementSetter, productWrapper);
ExporterUtil.RelateObject(exporterIFC, roofHnd, slabHnd);
productWrapper.AddElement(null, slabHnd, placementSetter.GetLevelInfo(), ecData, false);
CategoryUtil.CreateMaterialAssociations(exporterIFC, slabHnd, bodyData.MaterialIds);
}
}
tr.Commit();
}
}
}