//각 Constraint에서 사용하는 Master/Slave Part의 ReferenceName을 refCommand 구조체로 리턴
private refCommand TestRefer(TransCAD.IStdAssemConstraint tConstraint, CTYPE i) //constrain 받아오기
{
CTYPE type = i;
refCommand para = new refCommand();
refCommand result = new refCommand();
ReferenceClass.ref_Post m_refer = new ReferenceClass.ref_Post();
switch (type)
{
case CTYPE.Coaxial:
TransCAD.IStdAssemConstraintCoaxial coax = (TransCAD.IStdAssemConstraintCoaxial)tConstraint;
Console.WriteLine("Loading Coaxial......................................");
para.command = (int)type;
para.param = "Axis" + ":(";
para.MasterPart = coax.ConstrainedPart.Name;
para.SlavePart = coax.ReferencePart.Name;
para.MasterPart_Ref = coax.ConstrainedGeometry.ReferenceeName;
para.SlavePart_Ref = coax.ReferenceGeometry.ReferenceeName;
break;
case CTYPE.Incidence:
TransCAD.IStdAssemConstraintIncidence coin = (TransCAD.IStdAssemConstraintIncidence)tConstraint;
Console.WriteLine("Loading INCIDENCE......................................");
para.command = (int)type;
para.param = "";
para.MasterPart = coin.ConstrainedPart.Name;
para.SlavePart = coin.ReferencePart.Name;
para.MasterPart_Ref = coin.ConstrainedGeometry.ReferenceeName;
para.SlavePart_Ref = coin.ReferenceGeometry.ReferenceeName;
break;
/* Mutahar 18-10-09
* case CTYPE.Angle: //(Surface-Surface)
* TransCAD.IStdAssemConstraintAngle ang = (TransCAD.IStdAssemConstraintAngle)tConstraint;
* Console.WriteLine("Loading Angle......................................");
*
* para.command = (int)type;
* para.param = "";
* para.MasterPart = ang.ConstrainedPart.Name;
* para.SlavePart = ang.ReferencePart.Name;
* para.MasterPart_Ref = ang.ConstrainedGeometry.ReferenceeName;
* para.SlavePart_Ref = ang.ReferenceGeometry.ReferenceeName;
* Angle Value?
*
* break;
* case CTYPE.Distance: //(Surface-Surface)
* TransCAD.IStdAssemConstraintCoaxial Dist = (TransCAD.IStdAssemConstraintDistance)tConstraint;
* Console.WriteLine("Loading Distance......................................");
*
* para.command = (int)type;
* para.param = "";
* para.MasterPart = dist.ConstrainedPart.Name;
* para.SlavePart = dist.ReferencePart.Name;
* para.MasterPart_Ref = dist.ConstrainedGeometry.ReferenceeName;
* para.SlavePart_Ref = dist.ReferenceGeometry.ReferenceeName;
* Offset Value?
*
* break;
*/
default:
Console.WriteLine("Anything........");
break;
}
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
result = m_refer.ConvertRefPost(para);
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
Console.WriteLine("ConsNum : " + result.command.ToString());
Console.WriteLine("master : " + result.MasterPart_Ref);
Console.WriteLine("slave : " + result.SlavePart_Ref);
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
return(result);
}
//각 part 들을 .CATScript로 변한하여 path에 저장함
public void TranslatePartsT2C_Script(int CompNum, int PartNum, string path)
{
ReferenceClass.ref_Post m_refer = new ReferenceClass.ref_Post();
m_refer.AssemblyPartT2C(CompNum, PartNum, path);//CompNum,PartNum,filePath : 몇번째 Comp의 몇번째 Part를 filePath에 .CATScript로 변환해서 넣겠다.
}
//각 Constraint에서 사용하는 Master/Slave Part의 ReferenceName을 refCommand 구조체로 리턴
private refCommand TestRefer(TransCAD.StdAssemConstraint tConstraint, CTYPE i, PreStack _stack) //constrain 받아오기
{
CTYPE type = i;
refCommand para = new refCommand();
refCommand result = new refCommand();
ReferenceClass.ref_Post m_refer = new ReferenceClass.ref_Post();
m_refer.Set_stack_info(_stack);
double value = 0;
//Type Define TransCAD 7.0
/*
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Angle;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Coaxial;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Coincidence;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Distance;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Fix;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Parallel;
* TransCAD.StdAssemblyConstraintType.StdAssemblyConstraintType_Perpendicular;
*/
switch (type)
{
case CTYPE.StdAssemblyConstraintType_Coaxial:
TransCAD.StdAssemConstraintCoaxial coax = (TransCAD.StdAssemConstraintCoaxial)tConstraint;
Console.WriteLine("Loading Coaxial......................................");
_debug = coax.Name;
para.command = (int)type;
para.param = "Axis" + ":(";
para.MasterPart = coax.ConstrainedPart.Name;
para.SlavePart = coax.ReferencePart.Name;
para.MasterPart_Ref = coax.ConstrainedEntity.ReferenceeName;
_debug = coax.ConstrainedEntity.Name;
///[Edit]For test A1 TestRally 20190712
{
//TransCAD.Reference tempref = coax.ConstrainedEntity;
//bool res = tempref.IsPlanarFace;
//if we get edge name we have to find surface that define axis
if (para.MasterPart_Ref.IndexOf('#') != -1)
{
string[] _split = para.MasterPart_Ref.Split('#');
TransCAD.Part ptr = coax.ConstrainedPart;
for (int s = 0; s < _split.Length; s++)
{
string temp = _split[s].Substring(_split[s].IndexOf(',', _split[s].IndexOf(',') + 1) + 1);
TransCAD.Reference tempref = ptr.SelectBrepByName(temp);
if (!tempref.IsPlanar)
{
para.MasterPart_Ref = _split[s];
break;
}
para.MasterPart_Ref = _split[s];
}
}
}
para.SlavePart_Ref = coax.ReferenceEntity.ReferenceeName;
_debug = coax.ReferenceEntity.Name;
///[Edit]For test A1 TestRally 20190712
{
//if we get edge name we have to find surface that define axis
if (para.SlavePart_Ref.IndexOf('#') != -1)
{
string[] _split = para.SlavePart_Ref.Split('#');
//para.SlavePart_Ref = _split[1];
//Method 2 : Find by name of 'Sketch'
for (int j = 0; j < _split.Length; j++)
{
if (_split[j].IndexOf("Sketch") > 0)
{
para.SlavePart_Ref = _split[j];
}
}
}
if (para.SlavePart_Ref.IndexOf('#') != -1)
{
string[] _split = para.SlavePart_Ref.Split('#');
TransCAD.Part ptr = coax.ReferencePart;
for (int s = 0; s < _split.Length; s++)
{
string temp = _split[s].Substring(_split[s].IndexOf(',', _split[s].IndexOf(',') + 1) + 1);
TransCAD.Reference tempref = ptr.SelectBrepByName(temp);
if (!tempref.IsPlanar)
{
para.SlavePart_Ref = _split[s];
break;
}
para.SlavePart_Ref = _split[s];
}
}
}
Console.WriteLine(coax.ConstrainedEntity.ReferenceeName + ".&&." + coax.ReferenceEntity.ReferenceeName);
break;
case CTYPE.StdAssemblyConstraintType_Coincidence:
TransCAD.StdAssemConstraintCoincidence coin = (TransCAD.StdAssemConstraintCoincidence)tConstraint;
Console.WriteLine("Loading COINCIDENCE......................................");
_debug = coin.Name;
para.command = (int)type;
para.param = "";
para.MasterPart = coin.ConstrainedPart.Name;
para.SlavePart = coin.ReferencePart.Name;
para.MasterPart_Ref = coin.ConstrainedEntity.ReferenceeName;
para.SlavePart_Ref = coin.ReferenceEntity.ReferenceeName;
Console.WriteLine(coin.ConstrainedEntity.ReferenceeName + ".&&." + coin.ReferenceEntity.ReferenceeName);
break;
// Mutahar 18-10-09
case CTYPE.StdAssemblyConstraintType_Angle: //(Surface-Surface)
TransCAD.StdAssemConstraintAngle ang = (TransCAD.StdAssemConstraintAngle)tConstraint;
Console.WriteLine("Loading Angle......................................");
_debug = ang.Name;
para.command = (int)type;
para.param = "";
para.MasterPart = ang.ConstrainedPart.Name;
para.SlavePart = ang.ReferencePart.Name;
para.MasterPart_Ref = ang.ConstrainedEntity.ReferenceeName;
para.SlavePart_Ref = ang.ReferenceEntity.ReferenceeName;
value = ang.Angle;
Console.WriteLine(ang.ConstrainedEntity.ReferenceeName + ".&&." + ang.ReferenceEntity.ReferenceeName);
//Angle Value?
break;
case CTYPE.StdAssemblyConstraintType_Distance: //(Surface-Surface)
TransCAD.StdAssemConstraintDistance dist = (TransCAD.StdAssemConstraintDistance)tConstraint;
Console.WriteLine("Loading Distance......................................");
_debug = dist.Name;
para.command = (int)type;
para.param = "";
para.MasterPart = dist.ConstrainedPart.Name;
para.SlavePart = dist.ReferencePart.Name;
para.MasterPart_Ref = dist.ConstrainedEntity.ReferenceeName;
para.SlavePart_Ref = dist.ReferenceEntity.ReferenceeName;
Console.WriteLine(dist.ConstrainedEntity.ReferenceeName + ".&&." + dist.ReferenceEntity.ReferenceeName);
value = dist.Distance;
//Offset Value?
break;
default:
Console.WriteLine("Anything........");
break;
}
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
result = m_refer.ConvertRefPost(para);
result.option = value;
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
Console.WriteLine("ConsNum : " + result.command.ToString());
Console.WriteLine("master : " + result.MasterPart_Ref);
Console.WriteLine("slave : " + result.SlavePart_Ref);
Console.WriteLine("////////////////////////////////////////////////////////////////////////");
return(result);
}
