private void backgroundWorkerProcessReb_DoWork(object sender, DoWorkEventArgs e)
{
int horizon = (int)e.Argument;
e.Result = RebDa.ConvertReb(Properties.Settings.Default.is3D, this.rebData, horizon, Properties.Settings.Default.minDistance, st, st);
}
//siteplacement-argument?
public void mapProcess(JsonSettings jSettings, double?breakDist = null, double?refLatitude = null, double?refLongitude = null, double?refElevation = null)
{
var logger = LogManager.GetCurrentClassLogger();
logger.Info("----------------------------------------------");
//
//Read
//
var result = new Result();
string[] fileNames = new string[1];
fileNames[0] = jSettings.fileName;
switch (jSettings.fileType)
{
case "LandXML":
result = LandXml.ReadTIN(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "CityGML":
result = CityGml.ReadTIN(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "DXF":
DXF.ReadFile(jSettings.fileName, out this.dxfFile);
if (jSettings.isTin)
{
result = DXF.ReadDXFTin(jSettings.is3D, this.dxfFile, jSettings.layer, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
}
else
{
result = DXF.ReadDXFIndPoly(jSettings.is3D, this.dxfFile, jSettings.layer, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
}
break;
case "REB":
this.rebData = RebDa.ReadREB(fileNames);
result = RebDa.ConvertReb(jSettings.is3D, this.rebData, jSettings.horizon, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "Grid":
result = ElevationGrid.ReadGrid(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.gridSize, jSettings.bBox, jSettings.bbNorth, jSettings.bbEast, jSettings.bbSouth, jSettings.bbWest);
break;
}
this.Mesh = result.Mesh;
try
{
logger.Debug("Mesh created with: " + this.Mesh.Points.Count + " Points; " + this.Mesh.FixedEdges + " Lines; " + this.Mesh.FaceEdges + " Faces");
}
catch
{
logger.Debug("No Faces or Points found");
}
//
//Write
//
if (jSettings.projectName is null)
{
jSettings.projectName = "Name of project";
}
var writeInput = new WriteInput();
writeInput.Placement = Axis2Placement3D.Standard;
if (jSettings.customOrigin)
{
writeInput.Placement.Location = Vector3.Create(jSettings.xOrigin, jSettings.yOrigin, jSettings.zOrigin);
}
else
{
double midX = (this.Mesh.MaxX + this.Mesh.MinX) / 2;
double midY = (this.Mesh.MaxY + this.Mesh.MinY) / 2;
double midZ = (this.Mesh.MaxZ + this.Mesh.MinZ) / 2;
writeInput.Placement.Location = Vector3.Create(midX, midY, midZ);
}
// Placement verschieben?
writeInput.SurfaceType = SurfaceType.TFS;
if (jSettings.surfaceType == "GCS")
{
writeInput.SurfaceType = SurfaceType.GCS;
}
else if (jSettings.surfaceType == "SBSM")
{
writeInput.SurfaceType = SurfaceType.SBSM;
}
writeInput.FileType = FileType.Step;
if (jSettings.outFileType == "XML")
{
writeInput.FileType = FileType.XML;
}
logger.Debug("Writing IFC with:");
logger.Debug("IFC Version: " + jSettings.outIFCType);
logger.Debug("Surfacetype: " + jSettings.surfaceType);
logger.Debug("Filetype: " + jSettings.fileType);
if (jSettings.outIFCType == "IFC2x3")
{
var model = WriteIfc2.CreateSite(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist);
logger.Debug("IFC Site created");
WriteIfc2.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
logger.Info("IFC file writen: " + jSettings.destFileName);
}
else
{
logger.Debug("Geographical Element: " + jSettings.geoElement);
var model = jSettings.geoElement
? WriteIfc4.CreateSiteWithGeo(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist)
: WriteIfc4.CreateSite(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist);
logger.Debug("IFC Site created");
WriteIfc4.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
logger.Info("IFC file writen: " + jSettings.destFileName);
}
logger.Info("----------------------------------------------");
}
//siteplacement-argument?
public void mapProcess(JsonSettings jSettings, double?breakDist = null, double?refLatitude = null, double?refLongitude = null, double?refElevation = null)
{
Logger logger = LogManager.GetCurrentClassLogger();
logger.Info("----------------------------------------------");
#region Reader
//
//Read
//
var result = new Result();
string[] fileNames = new string[1];
fileNames[0] = jSettings.fileName;
#region import data typ selection
switch (jSettings.fileType)
{
case "LandXML":
result = LandXml.ReadTIN(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "CityGML":
result = CityGml.ReadTIN(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "DXF":
DXF.ReadFile(jSettings.fileName, out dxfFile);
if (jSettings.isTin)
{
//READING as TIN
result = DXF.ReadDXFTin(jSettings.is3D, dxfFile, jSettings.layer, jSettings.breakline_layer, jSettings.minDist, jSettings.breakline);
}
else
{
//READING as MESH --> have to be changed into TIN
result = DXF.ReadDXFIndPoly(jSettings.is3D, dxfFile, jSettings.layer, jSettings.breakline_layer, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel, jSettings.breakline);
}
break;
case "REB":
this.rebData = RebDa.ReadREB(fileNames);
result = RebDa.ConvertReb(jSettings.is3D, this.rebData, jSettings.horizon, jSettings.minDist, jSettings.logFilePath, jSettings.verbosityLevel);
break;
case "Grid":
result = ElevationGrid.ReadGrid(jSettings.is3D, jSettings.fileName, jSettings.minDist, jSettings.gridSize, jSettings.bBox, jSettings.bbNorth, jSettings.bbEast, jSettings.bbSouth, jSettings.bbWest);
break;
case "OUT":
if (jSettings.isTin)
{
//result = Out.ReadOUTTin(jSettings.is3D, jSettings.fileName,jSettings.onlyTypes, jSettings.layer, jSettings.minDist, jSettings.ignPos, jSettings.ignHeight, jSettings.onlyHorizon, jSettings.horizonFilter, jSettings.breakline, jSettings.breakline_layer); //reworking
result = ReadOUT.ReadOutData(jSettings.fileName, out pointIndex2NumberMap, out triangleIndex2NumberMap); //pointIndex2NumberMap & triangleIndex2NumberMap ggf. entfernen
}
/* ENTFERNT, da derzeit nur über FACES verarbeitet wird
* else
* {
*
* //result = Out.ReadOUT_Points_Lines(jSettings.is3D, jSettings.fileName, jSettings.layer, jSettings.minDist, jSettings.ignPos, jSettings.ignHeight, jSettings.breakline, jSettings.breakline_layer);
* }*/
break;
case "PostGIS":
result = PostGIS.ReadPostGIS(jSettings.is3D, jSettings.minDist, jSettings.host, jSettings.port, jSettings.user, jSettings.password, jSettings.database, jSettings.schema, jSettings.tin_table, jSettings.tin_column, jSettings.tinid_column, jSettings.tin_id, jSettings.breakline, jSettings.breakline_table, jSettings.breakline_column, jSettings.breakline_tin_id);
break;
}
this.Tin = result.Tin;
this.Mesh = result.Mesh;
this.Breaklines = result.Breaklines;
#endregion
#region Mesh-Checker
if (Mesh != null)
{
try
{
logger.Debug("Mesh created with: " + Mesh.Points.Count + " Points; " + Mesh.FixedEdges.Count + " Lines; " + Mesh.FaceEdges.Count + " Faces");
}
catch
{
logger.Debug("No Faces or Points found!");
}
}
/*
* else
* {
*
* try
* {
* //Removed --> relocate in reader
* //logger.Debug("Tin created with: " + Tin.Points.Count + " Points; " + Tin.NumTriangles + " Triangels");
* }
* catch
* {
* //logger.Debug("No Triangels or Points found!");
* }
* }
*/
#endregion
#endregion
#region Writer
//
//Write
//
#region project Name
if (jSettings.projectName is null)
{
jSettings.projectName = "Name of project";
}
#endregion
var writeInput = new WriteInput();
#region Placement
writeInput.Placement = Axis2Placement3D.Standard;
if (jSettings.customOrigin)
{
writeInput.Placement.Location = Vector3.Create(jSettings.xOrigin, jSettings.yOrigin, jSettings.zOrigin);
}
else
{
double MinX = 0;
double MinY = 0;
double MinZ = 0;
double MaxX = 0;
double MaxY = 0;
double MaxZ = 0;
if (Mesh != null)
{
double midX = (this.Mesh.MaxX + this.Mesh.MinX) / 2;
double midY = (this.Mesh.MaxY + this.Mesh.MinY) / 2;
double midZ = (this.Mesh.MaxZ + this.Mesh.MinZ) / 2;
writeInput.Placement.Location = Vector3.Create(midX, midY, midZ);
}
//Vorschlag für BimGisCad.Composed (in MESH ist dies bereits vorhanden)
else
{
int i = 0;
foreach (Point3 point in Tin.Points)
{
//initalisierung durch ersten Punkt
if (i > 0)
{
if (point.X < MinX)
{
MinX = point.X;
}
if (point.X > MaxX)
{
MaxX = point.X;
}
if (point.Y < MinY)
{
MinY = point.Y;
}
if (point.Y > MaxY)
{
MaxY = point.Y;
}
if (point.Z < MinZ)
{
MinZ = point.Z;
}
if (point.Z > MaxZ)
{
MaxZ = point.Z;
}
}
else
{
MinX = point.X;
MinY = point.Y;
MinZ = point.Z;
MaxX = point.X;
MaxY = point.Y;
MaxZ = point.Z;
}
i++;
}
double MidX = (MaxX + MinX) / 2;
double MidY = (MaxY + MinY) / 2;
double MidZ = (MaxZ + MinZ) / 2;
writeInput.Placement.Location = Vector3.Create(MidX, MidY, MidZ);
}
}
#endregion
#region IFC Version
writeInput.SurfaceType = SurfaceType.TFS;
if (jSettings.surfaceType == "GCS")
{
writeInput.SurfaceType = SurfaceType.GCS;
}
else if (jSettings.surfaceType == "SBSM")
{
writeInput.SurfaceType = SurfaceType.SBSM;
}
else if (jSettings.surfaceType == "TIN")
{
writeInput.SurfaceType = SurfaceType.TIN;
}
#endregion
#region IFC Version Filetyp
writeInput.FileType = FileType.Step;
if (jSettings.outFileType == "XML")
{
writeInput.FileType = FileType.XML;
}
logger.Debug("Writing IFC with:");
logger.Debug("IFC Version: " + jSettings.outIFCType);
logger.Debug("Surfacetype: " + jSettings.surfaceType);
logger.Debug("Filetype: " + jSettings.fileType);
#endregion
#region IFC2x3
if (jSettings.outIFCType == "IFC2x3")
{
var model = WriteIfc2.CreateSite(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist);
logger.Debug("IFC Site created");
WriteIfc2.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
logger.Info("IFC file writen: " + jSettings.destFileName);
}
#endregion
#region IFC4 - MESH
else if (jSettings.outIFCType == "IFC4")
{
logger.Debug("Geographical Element: " + jSettings.geoElement);
var model = jSettings.geoElement
? WriteIfc4.CreateSiteWithGeo(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist)
: WriteIfc4.CreateSite(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Mesh,
writeInput.SurfaceType,
breakDist);
logger.Debug("IFC Site created");
WriteIfc4.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
logger.Info("IFC file writen: " + jSettings.destFileName);
}
#endregion
//DRAFT VERSION BELOW
#region IFC4 - TIN
if (jSettings.outIFCType == "IFC4TIN")
{
var model = jSettings.geoElement
? WriteIfc4Tin.CreateSiteWithGeo(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
//jSettings.minDist,
"Site with Terrain",
writeInput.Placement,
this.Tin,
this.Breaklines,
writeInput.SurfaceType,
breakDist)
: WriteIfc4Tin.CreateSite(jSettings.projectName,
jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
//jSettings.minDist,
"Site with Terrain",
writeInput.Placement,
this.Tin,
this.Breaklines,
writeInput.SurfaceType,
breakDist);;
WriteIfc4Tin.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
}
#endregion
#region IFC2x3 TIN
if (jSettings.outIFCType == "IFC2x3TIN")
{
var model = WriteIfc2TIN.CreateSite(jSettings.projectName,
jSettings.editorsFamilyName,
jSettings.editorsGivenName,
jSettings.editorsOrganisationName,
"Site with Terrain",
writeInput.Placement,
this.Tin,
writeInput.SurfaceType,
breakDist);
logger.Debug("IFC Site created");
WriteIfc2TIN.WriteFile(model, jSettings.destFileName, writeInput.FileType == FileType.XML);
logger.Info("IFC file writen: " + jSettings.destFileName);
}
#endregion
#endregion
logger.Info("----------------------------------------------");
}