/// <summary>
/// 初始化下拉式選項(不良原因碼及工件序號)
/// </summary>
void InitialDropDownList()
{
ddlDefectReason.Items.Clear();
List <BusinessReason> reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(_LotData.CurrentRuleName, _LotData.OperationName, "Default", ReasonMode.Category);
if (reason.Count > 0)
{
ddlDefectReason.DataSource = reason;
ddlDefectReason.DataTextField = "ReasonDescription";
ddlDefectReason.DataValueField = "ReasonCategorySID";
ddlDefectReason.DataBind();
if (ddlDefectReason.Items.Count != 1)
{
ddlDefectReason.Items.Insert(0, "");
}
else
{
ddlDefectReason.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(_LotData.CurrentRuleName, _LotData.OperationName));
}
ddlComponentId.Items.Clear();
List <ComponentInfo> components = ComponentInfo.GetLotAllComponents(_LotData);
if (components.Count > 0)
{
ddlComponentId.DataSource = components;
ddlComponentId.DataTextField = "COMPONENTID";
ddlComponentId.DataValueField = "WIPComponentSID";
ddlComponentId.DataBind();
if (ddlComponentId.Items.Count != 1)
{
ddlComponentId.Items.Insert(0, "");
}
else
{
ddlComponentId.SelectedIndex = 0;
ddlComponentId_SelectedIndexChanged(null, EventArgs.Empty);
}
}
}
protected void ttbWOLot_TextChanged(object sender, EventArgs e)
{
try
{
/***************************************************************************************
* 依照PRODTYP不同，做不同畫面的處置：
* S：有序號，一律刷入DMC處理。
* G：僅有鍛造批，選擇要判定的工作站，系統找出該工作站所有的COMPONENT，順排取最後一個
* W：沒有刻字，選擇要判定的工作站，系統找出該工作站所有的COMPONENT，順排取最後一個
* B：有刻字，但序號無意義。
* 在刻字站前因為未刻字所以選擇要判定的工作站，系統找出該工作站所有的COMPONENT，順排取最後一個
* 刻字後，直接刷入DMC處理
**********************************************************/
// 清除資料與使用者介面
ClearField();
LoadDefaultControl();
string sWOLot = ttbWOLot.Text.Trim();
if (sWOLot.IsNullOrEmpty())
{
return;
}
#region 找出料號型態
// 小工單號找批號，此處找批號只是為了找出料號，也順便可以確認線上還有批號可以做送待判這件事
ProcessLotData = LotInfoEx.GetLotByWorkOrderLot(sWOLot);
if (ProcessLotData == null)
{
ProcessLotData = LotInfoEx.GetLotByLot(sWOLot);
}
if (ProcessLotData == null)
{
ttbWOLot.Text = "";
AjaxFocus(ttbWOLot);
throw new RuleCimesException(TextMessage.Error.T00030(GetUIResource("WOLot"), sWOLot));
}
//取得小工單號的料號版本
var deviceVersionInfo = DeviceVersionInfo.GetLotCurrentDeviceVersion(ProcessLotData).ChangeTo <DeviceVersionInfoEx>();
if (deviceVersionInfo == null)
{
throw new CimesException(TextMessage.Error.T00537(ProcessLotData.DeviceName));
}
if (deviceVersionInfo.ProdType.IsNullOrTrimEmpty())
{
ttbWOLot.Text = "";
AjaxFocus(ttbWOLot);
throw new RuleCimesException(TextMessage.Error.T00031(GetUIResource("Device"), deviceVersionInfo.DeviceName, "PRODTYPE"));
}
_ProdType = deviceVersionInfo.ProdType;
#endregion
#region 取得工作站
ddlOperation.Items.Clear();
var lstLotRouteOperation = RouteOperationInfo.GetLotDefaultOperations(ProcessLotData).OrderBy(p => p.OperationSequence).ToList();
lstLotRouteOperation.ForEach(oper => {
ddlOperation.Items.Add(new ListItem(oper.OperationName + "[" + oper.OperationSequence + "]", oper.OperationName));
});
ddlOperation.Items.Insert(0, "");
#endregion
#region 原因碼選項
ddlDefectReason.Items.Clear();
List <BusinessReason> reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, ProcessLotData.OperationName, "Default", ReasonMode.Category);
if (reason.Count == 0)
{
reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
}
if (reason.Count > 0)
{
ddlDefectReason.DataSource = reason;
ddlDefectReason.DataTextField = "ReasonDescription";
ddlDefectReason.DataValueField = "ReasonCategorySID";
ddlDefectReason.DataBind();
if (ddlDefectReason.Items.Count != 1)
{
ddlDefectReason.Items.Insert(0, "");
}
else
{
ddlDefectReason.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, ProcessLotData.OperationName));
}
#endregion
#region 依照PRODTYPE處理介面
ttbDefectDesc.ReadOnly = false;
ddlDefectReason.Enabled = true;
if (_ProdType == CustomizeFunction.ProdType.S.ToCimesString())
{
ddlOperation.Enabled = false;
ttbWorkpiece.ReadOnly = false;
}
if (_ProdType == CustomizeFunction.ProdType.W.ToCimesString() || _ProdType == CustomizeFunction.ProdType.G.ToCimesString())
{
ttbWorkpiece.ReadOnly = true;
ddlOperation.Enabled = true;
}
if (_ProdType == CustomizeFunction.ProdType.B.ToCimesString())
{
ttbWorkpiece.ReadOnly = false;
ddlOperation.Enabled = true;
}
#endregion
#region 找出待判站
//在系統資料維護裡，取得此批號對應製程(CPC/CPF)的待判工作站名稱
List <WpcExClassItemInfo> operationList = WpcExClassItemInfo.GetExtendItemListByClassAndRemarks("SAIJudgeOperation");
WpcExClassItemInfo judgeOperationData = operationList.Find(p => p.Remark01 == ProcessLotData.Process);
if (judgeOperationData == null)
{
//找不到待判站資訊，請至系統資料維護增加資訊，屬性：{0}
throw new Exception(RuleMessage.Error.C10014(ProcessLotData.Process));
}
//取得待判工作站名稱
_JudgeOperationName = judgeOperationData.Remark02;
#endregion
if (ttbWorkpiece.Enabled)
{
AjaxFocus(ttbWorkpiece);
}
}
catch (Exception ex)
{
HandleError(ex);
}
}
/// <summary>
/// 輸入機加批號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ttbLot_TextChanged(object sender, EventArgs e)
{
try
{
#region 驗證批號存在性
_LotData = LotInfoEx.GetLotByLot(ttbLot.Text);
if (_LotData == null)
{
//[00030]{0}：{1}不存在!
throw new Exception(TextMessage.Error.T00030(lblLot.Text, ttbLot.Text));
}
#endregion
#region 驗證批號狀態，Run的批號
if (_LotData.Status != LotDefaultStatus.Run.ToString())
{
//狀態為{0}，不可執行
throw new Exception(RuleMessage.Error.C10003(_LotData.Status));
}
#endregion
#region 驗證currentRule
if (_LotData.CurrentRuleName != _ProgramInformationBlock.ProgramRight)
{
//該批號作業為XXXX，不為此功能，請遵循作業規範
throw new Exception(RuleMessage.Error.C10004(_LotData.CurrentRuleName));
}
#endregion
#region 維修原因碼(DropDownList)：依照原因碼工作站設定，帶出原因碼
ddlRepairReasonCode.Items.Clear();
List <BusinessReason> reasonList = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(_LotData.CurrentRuleName, _LotData.OperationName, "Default", ReasonMode.Category);
if (reasonList.Count > 0)
{
ddlRepairReasonCode.DataSource = reasonList;
ddlRepairReasonCode.DataTextField = "ReasonDescription";
ddlRepairReasonCode.DataValueField = "ReasonCategorySID";
ddlRepairReasonCode.DataBind();
if (ddlRepairReasonCode.Items.Count != 1)
{
ddlRepairReasonCode.Items.Insert(0, "");
}
else
{
ddlRepairReasonCode.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, _LotData.OperationName));
}
#endregion
//取得工件序號
var componentDataList = ComponentInfoEx.GetDataByCurrentLot(_LotData.Lot);
if (componentDataList.Count > 0)
{
ttbItemSN.Text = componentDataList[0].ComponentID;
}
//取得送待判原因
var lotDefectData = LotDefectInfoEx.GetDataByLotAndComponentID(_LotData.Lot, ttbItemSN.Text);
if (lotDefectData != null)
{
_DefectJudgementData = CSTWIPDefectJudgementInfo.GetDataByWIPDefectSID(lotDefectData.DefectSID);
if (_DefectJudgementData != null)
{
ttbJudgeReason.Text = _DefectJudgementData.Reason;
}
}
ttbRepairDescr.Text = "";
btnOK.Enabled = true;
}
catch (Exception ex)
{
ClearField();
AjaxFocus(ttbLot);
HandleError(ex);
}
}
/// <summary>
/// 切換序號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ddlSN_SelectedIndexChanged(object sender, EventArgs e)
{
try
{
//清除機台檢驗資料
_CSTWIPCMMList = new List <CSTWIPCMMInfo>();
_CSTWIPCMMDataList = new List <CSTWIPCMMDataInfo>();
gvInspectionData.SetDataSource(_CSTWIPCMMDataList, true);
ddlFileName.Items.Clear();
ddlSN.Must(lblSN);
if (ddlSN.SelectedIndex != -1)
{
//清除原因碼資料
ddlFAIReasonCode.Items.Clear();
ttbMaterialLot.Text = "";
ttbWorkOrderLot.Text = "";
ttbDescr.Text = "";
rdbPASS.Enabled = false;
rdbNG.Enabled = false;
rdbOK.Enabled = false;
int index = -1;
for (int i = 0; i < _QCDataList.Count; i++)
{
string ID = _QCDataList[i].ID;
//比對符合選擇機台編號的資料
if (ID == ddlSN.SelectedValue)
{
index = i;
break;
}
}
_SelectedQCData = _QCDataList[index];
ttbMaterialLot.Text = _SelectedQCData.MaterialLot;
ttbWorkOrderLot.Text = _SelectedQCData.WorkOderLot;
if (_SelectedQCData.PassFlag == "N")
{
//以機台名稱檢查是否有檢驗結果資料
_CSTWIPCMMList = CSTWIPCMMInfo.GetDataListByEquipmantAndFileIDAndDevice(_SelectedQCData.EquipmentName, _SelectedQCData.ComponentLot,
_SelectedQCData.WorkOderLot, _SelectedQCData.MaterialLot, _SelectedQCData.DeviceName);
//以OP1機台名稱檢查是否有檢驗結果資料
var CSTWIPCMMListBySEquipment = CSTWIPCMMInfo.GetDataListByEquipmantAndFileIDAndDevice(_SelectedQCData.SecondEquipmentName, _SelectedQCData.ComponentLot,
_SelectedQCData.WorkOderLot, _SelectedQCData.MaterialLot, _SelectedQCData.DeviceName);
//將二組資料合併，去除重覆資料
CSTWIPCMMListBySEquipment.ForEach(data =>
{
if (_CSTWIPCMMList.Contains(data) == false)
{
_CSTWIPCMMList.Add(data);
}
});
if (_CSTWIPCMMList.Count == 0)
{
//序號:{0} 沒有機台檢驗資料可以顯示!
throw new Exception(RuleMessage.Error.C10065(ddlSN.SelectedItem.Text));
}
//加入機台檢驗檔名稱
_CSTWIPCMMList.ForEach(data =>
{
ddlFileName.Items.Add(new ListItem(data["FILENAME"].ToString(), data.ID));
});
if (ddlFileName.Items.Count > 0)
{
ddlFileName.Items.Insert(0, "");
}
}
else
{
rdbPASS.Enabled = true;
}
//取得Lot資料
var lotData = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
rdbNG.Enabled = true;
rdbOK.Enabled = true;
#region 設置原因碼
List <BusinessReason> reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
if (reason.Count > 0)
{
ddlFAIReasonCode.DataSource = reason;
ddlFAIReasonCode.DataTextField = "ReasonDescription";
ddlFAIReasonCode.DataValueField = "ReasonCategorySID";
ddlFAIReasonCode.DataBind();
if (ddlFAIReasonCode.Items.Count != 1)
{
ddlFAIReasonCode.Items.Insert(0, "");
}
else
{
ddlFAIReasonCode.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, "ALL"));
}
#endregion
btnOK.Enabled = true;
}
}
catch (Exception ex)
{
HandleError(ex);
ddlFAIReasonCode.Items.Clear();
ttbMaterialLot.Text = "";
ttbDescr.Text = "";
ttbWorkOrderLot.Text = "";
btnOK.Enabled = false;
rdbOK.Checked = true;
rdbNG.Checked = false;
rdbPASS.Checked = false;
rdbCLOSE.Checked = false;
rdbOK.Enabled = true;
rdbNG.Enabled = false;
rdbPASS.Enabled = false;
_CSTWIPCMMList = new List <CSTWIPCMMInfo>();
_CSTWIPCMMDataList = new List <CSTWIPCMMDataInfo>();
gvInspectionData.SetDataSource(_CSTWIPCMMDataList, true);
}
}
/// <summary>
/// 切換不同的送待判原因
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ddlJudgeDefect_SelectedIndexChanged(object sender, EventArgs e)
{
try
{
//確認是否有選擇送待判原因
ddlJudgeDefect.Must(lblJudgeDefect);
//取得批號資訊
_LotDefectData = InfoCenter.GetBySID <LotDefectInfo>(ddlJudgeDefect.SelectedValue);
_LotData = LotInfoEx.GetLotByLot(_LotDefectData.Lot).ChangeTo <LotInfoEx>();
#region 判定原因碼(DropDownList)：依照原因碼工作站設定，帶出原因碼
ddlJudgeReason.Items.Clear();
List <BusinessReason> reasonList = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(_LotData.CurrentRuleName, _LotData.OperationName, "Default", ReasonMode.Category);
if (reasonList.Count > 0)
{
ddlJudgeReason.DataSource = reasonList;
ddlJudgeReason.DataTextField = "ReasonDescription";
ddlJudgeReason.DataValueField = "ReasonCategorySID";
ddlJudgeReason.DataBind();
if (ddlJudgeReason.Items.Count != 1)
{
ddlJudgeReason.Items.Insert(0, "");
}
else
{
ddlJudgeReason.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, _LotData.OperationName));
}
#endregion
//數量
ttbQty.Text = _LotData.Quantity.ToString();
//取得工件序號
var componentDataList = ComponentInfoEx.GetDataByCurrentLot(_LotData.Lot);
if (componentDataList.Count > 0)
{
ttbItemSN.Text = componentDataList[0].ComponentID;
}
ttbJudgeDescr.Text = "";
btnOK.Enabled = true;
btnPrint.Enabled = true;
}
catch (Exception ex)
{
ttbItemSN.Text = "";
ttbQty.Text = "";
ttbJudgeDescr.Text = "";
ddlJudgeReason.Items.Clear();
btnOK.Enabled = false;
btnPrint.Enabled = false;
_LotData = null;
_LotDefectData = null;
HandleError(ex);
}
}
/// <summary>
/// 輸入刀具零組件
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ttbToolName_TextChanged(object sender, EventArgs e)
{
try
{
_ToolData = ToolInfo.GetToolByName(ttbToolName.Text.Trim()).ChangeTo <ToolInfoEx>();
//確認刀具零組件是否存在
if (_ToolData == null)
{
// [00030]{0}：{1}不存在!
throw new Exception(TextMessage.Error.T00030(lblToolName.Text, ttbToolName.Text));
}
//確認刀具零組件是否啟用
if (_ToolData.UsingStatus == UsingStatus.Disable)
{
//刀具零組件：{0}已停用，如需使用，請至"刀具零組件進料作業"啟用!!
throw new Exception(RuleMessage.Error.C10128(ttbToolName.Text));
}
//確認刀具零組件狀態是否可使用，僅IDLE可執行
if (_ToolData.CurrentState != "IDLE")
{
//刀具零組件狀態為{0}，不可執行此功能!!
throw new Exception(RuleMessage.Error.C10129(_ToolData.CurrentState));
}
#region 機原因碼(DropDownList)：依照原因碼工作站設定，帶出原因碼
ddlReason.Items.Clear();
List <BusinessReason> reasonList = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
if (reasonList.Count > 0)
{
ddlReason.DataSource = reasonList;
ddlReason.DataTextField = "ReasonDescription";
ddlReason.DataValueField = "ReasonCategorySID";
ddlReason.DataBind();
if (ddlReason.Items.Count != 1)
{
ddlReason.Items.Insert(0, "");
}
else
{
ddlReason.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, "ALL"));
}
#endregion
btnOK.Enabled = true;
}
catch (Exception ex)
{
ClearField();
AjaxFocus(ttbToolName);
HandleError(ex);
}
}
/// <summary>
/// 切換序號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ddlSN_SelectedIndexChanged(object sender, EventArgs e)
{
try
{
ddlSN.Must(lblSN);
if (ddlSN.SelectedIndex != -1)
{
//清除原因碼資料
ddlPQCReasonCode.Items.Clear();
ttbMaterialLot.Text = "";
ttbWorkOrderLot.Text = "";
ttbDescr.Text = "";
rdbNG.Enabled = false;
rdbOK.Enabled = false;
int index = -1;
for (int i = 0; i < _QCDataList.Count; i++)
{
string ID = _QCDataList[i].ID;
//比對符合選擇機台編號的資料
if (ID == ddlSN.SelectedValue)
{
index = i;
break;
}
}
_SelectedQCData = _QCDataList[index];
ttbMaterialLot.Text = _SelectedQCData.MaterialLot;
ttbWorkOrderLot.Text = _SelectedQCData.WorkOderLot;
if (_SelectedQCData.PassFlag == "N")
{
// 取得中心孔量測設定值
var lstSAICenterHolde = WpcExClassItemInfo.GetExClassItemInfo("SAICenterHole", _SelectedQCData.DeviceName);
if (lstSAICenterHolde.Count == 0)
{
lstSAICenterHolde = WpcExClassItemInfo.GetExClassItemInfo("SAICenterHole", "ALL");
}
// 若找不到中心孔量測需拋錯
if (lstSAICenterHolde.Count == 0)
{
throw new Exception(TextMessage.Error.T00555("SAICenterHole", _SelectedQCData.DeviceName + "," + "ALL"));
}
_SAICenterHole = lstSAICenterHolde[0];
// 設定中心孔量測的DataTable資料
DataTable dtEmpty = new DataTable();
dtEmpty.Columns.Add("ITEM", typeof(int));
dtEmpty.Columns.Add("EDC", typeof(String));
for (int i = 0; i < _SAICenterHole.Remark04.ToDecimal(0); i++)
{
DataRow dr = dtEmpty.NewRow();
dr["ITEM"] = i + 1;
dtEmpty.Rows.Add(dr);
}
// 將產生的資料表顯示在畫面上
gvComponentEDC.DataSource = dtEmpty;
gvComponentEDC.DataBind();
}
//取得Lot資料
var lotData = InfoCenter.GetBySID <LotInfo>(_SelectedQCData.ObjectSID);
rdbNG.Enabled = true;
rdbOK.Enabled = true;
#region 設置原因碼
List <BusinessReason> reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
if (reason.Count > 0)
{
ddlPQCReasonCode.DataSource = reason;
ddlPQCReasonCode.DataTextField = "ReasonDescription";
ddlPQCReasonCode.DataValueField = "ReasonCategorySID";
ddlPQCReasonCode.DataBind();
if (ddlPQCReasonCode.Items.Count != 1)
{
ddlPQCReasonCode.Items.Insert(0, "");
}
else
{
ddlPQCReasonCode.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, "ALL"));
}
#endregion
btnOK.Enabled = true;
}
}
catch (Exception ex)
{
HandleError(ex);
ddlPQCReasonCode.Items.Clear();
ttbMaterialLot.Text = "";
ttbDescr.Text = "";
ttbWorkOrderLot.Text = "";
btnOK.Enabled = false;
rdbOK.Checked = true;
rdbNG.Checked = false;
rdbOK.Enabled = true;
rdbNG.Enabled = false;
gvComponentEDC.DataSource = null;
gvComponentEDC.DataBind();
}
}
/// <summary>
/// 切換料號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ddlDevice_SelectedIndexChanged(object sender, EventArgs e)
{
try
{
#region 清除資料
ddlFileName.Items.Clear();
ddlPPKReasonCode.Items.Clear();
_CSTWIPCMMList = new List <CSTWIPCMMInfo>();
_QCInspectionObjDataList.Clear();
gvQC.SetDataSource(_QCInspectionObjDataList, true);
_CSTWIPCMMDataList = new List <CSTWIPCMMDataInfo>();
gvInspectionData.SetDataSource(_CSTWIPCMMDataList, true);
btnOK.Enabled = false;
#endregion
//確認是否有選擇料號
if (ddlDevice.SelectedItem.Text.IsNullOrTrimEmpty() == false)
{
//取得料號名稱
string deviceName = ddlDevice.SelectedItem.Text;
//清除檢驗清單
_QCInspectionObjDataList.Clear();
List <QCInspectionObjectInfoEx> QCInspectionObjDataListTemp = new List <QCInspectionObjectInfoEx>();
_QCInspectionDataList.ForEach(QCData =>
{
//符合所選的料號才可以加入序號清單
if (QCData.DeviceName == deviceName)
{
var selectDataList = QCInspectionObjectInfoEx.GetDataListByQCInspectionSID(QCData.QC_INSP_SID);
QCInspectionObjDataListTemp.AddRange(selectDataList);
}
});
//以SID排序
_QCInspectionObjDataList = QCInspectionObjDataListTemp.OrderBy(p => p.ID).ToList();
#region 檢驗資料
//確認料號資料是否在在
_DeviceVersionData = DeviceVersionInfo.GetActiveDeviceVersion(deviceName).ChangeTo <DeviceVersionInfoEx>();
if (_DeviceVersionData == null)
{
//[00030]{0}：{1}不存在!
throw new Exception(TextMessage.Error.T00030(lblDevice.Text, deviceName));
}
//清除資料
_CSTWIPCMMList.Clear();
if (_DeviceVersionData.ProdType == CustomizeFunction.ProdType.S.ToCimesString())
{
_QCInspectionObjDataList.ForEach(data =>
{
//以機台名稱檢查是否有檢驗結果資料
var CSTWIPCMMListByEquipment = CSTWIPCMMInfo.GetDataListByEquipmantAndFileIDAndDevice(ttbEquip.Text, data.ItemName1, data.ItemName2,
data.ItemName3, deviceName);
//以OP1機台名稱檢查是否有檢驗結果資料
var CSTWIPCMMListBySEquipment = CSTWIPCMMInfo.GetDataListByEquipmantAndFileIDAndDevice(data.ItemName5, data.ItemName1, data.ItemName2,
data.ItemName3, deviceName);
//將二組資料合併，去除重覆資料
CSTWIPCMMListBySEquipment.ForEach(WIPCMMdata =>
{
if (CSTWIPCMMListByEquipment.Contains(WIPCMMdata) == false)
{
CSTWIPCMMListByEquipment.Add(WIPCMMdata);
}
});
if (CSTWIPCMMListByEquipment.Count == 0)
{
//PPK 檢驗工件未到齊，無法執行 PPK 判定!
throw new Exception(RuleMessage.Error.C10118());
}
//再將找到的資料合併，去除重覆資料
CSTWIPCMMListByEquipment.ForEach(WIPCMMdata =>
{
//將[QC_INSP_SID]寫到每一筆檢驗機台資料
WIPCMMdata.QCInspectionSID = data.QC_INSP_SID;
if (_CSTWIPCMMList.Contains(WIPCMMdata) == false)
{
_CSTWIPCMMList.Add(WIPCMMdata);
}
});
});
}
else
{
//以機台名稱檢查是否有檢驗結果資料
var CSTWIPCMMListByEquipment = CSTWIPCMMInfo.GetDataListByEquipmantAndDevice(ttbEquip.Text, deviceName);
if (CSTWIPCMMListByEquipment.Count == 0)
{
//PPK 檢驗工件未到齊，無法執行 PPK 判定!
throw new Exception(RuleMessage.Error.C10118());
}
_QCInspectionObjDataList.ForEach(data =>
{
//以OP1機台名稱檢查是否有檢驗結果資料
var CSTWIPCMMListBySEquipment = CSTWIPCMMInfo.GetDataListByEquipmantAndDevice(data.ItemName5, deviceName);
//將二組資料合併，去除重覆資料
CSTWIPCMMListBySEquipment.ForEach(WIPCMMdata =>
{
if (CSTWIPCMMListByEquipment.Contains(WIPCMMdata) == false)
{
CSTWIPCMMListByEquipment.Add(WIPCMMdata);
}
});
});
//重新依據[FILEID], [SN], [SEQUENCE]執行排序
_CSTWIPCMMList = CSTWIPCMMListByEquipment.OrderBy(data => data.FileID).ThenBy(data => data["SN"]).ToList();
#region 確認檢驗結果主檔筆數是否與檢驗單明細筆數相同
List <NoSNData> NoSNDataList = new List <NoSNData>();
_CSTWIPCMMList.ForEach(data =>
{
NoSNData tempNoSNData = new NoSNData();
tempNoSNData.SN = data["SN"].ToCimesString();
tempNoSNData.FileID = data.FileID;
if (NoSNDataList.Contains(tempNoSNData) == false)
{
NoSNDataList.Add(tempNoSNData);
}
});
//比對檢驗結果主檔筆數是否與檢驗單明細筆數相同
if (NoSNDataList.Count != _QCInspectionObjDataList.Count)
{
//檢驗結果主檔筆數({0})與檢驗單明細筆數({1})不相同
throw new Exception(RuleMessage.Error.C10112(NoSNDataList.Count().ToString(), _QCInspectionObjDataList.Count.ToString()));
}
#endregion
for (int i = 0; i < NoSNDataList.Count; i++)
{
string QCInspectionSID = _QCInspectionObjDataList[i].QC_INSP_OBJ_SID;
_CSTWIPCMMList.ForEach(data =>
{
if (data.FileID == NoSNDataList[i].FileID && data["SN"].ToCimesString() == NoSNDataList[i].SN)
{
//將[QC_INSP_SID]寫到每一筆檢驗機台資料
data.QCInspectionSID = QCInspectionSID;
}
});
}
}
//加入機台檢驗檔名稱
_CSTWIPCMMList.ForEach(WIPCMMdata =>
{
ddlFileName.Items.Add(new ListItem(WIPCMMdata["FILENAME"].ToString(), WIPCMMdata.ID));
});
if (ddlFileName.Items.Count > 0)
{
ddlFileName.Items.Insert(0, "");
}
gvQC.SetDataSource(_QCInspectionObjDataList, true);
#endregion
#region 設置原因碼
//清除原因碼資料
ddlPPKReasonCode.Items.Clear();
rdbNG.Enabled = false;
rdbOK.Enabled = false;
rdbNG.Enabled = true;
rdbOK.Enabled = true;
//取得原因碼清單
List <BusinessReason> reason = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
if (reason.Count > 0)
{
ddlPPKReasonCode.DataSource = reason;
ddlPPKReasonCode.DataTextField = "ReasonDescription";
ddlPPKReasonCode.DataValueField = "ReasonCategorySID";
ddlPPKReasonCode.DataBind();
if (ddlPPKReasonCode.Items.Count != 1)
{
ddlPPKReasonCode.Items.Insert(0, "");
}
else
{
ddlPPKReasonCode.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, "ALL"));
}
#endregion
btnOK.Enabled = true;
}
}
catch (Exception ex)
{
//清除資料
ddlFileName.Items.Clear();
ddlPPKReasonCode.Items.Clear();
_CSTWIPCMMList = new List <CSTWIPCMMInfo>();
_QCInspectionObjDataList.Clear();
gvQC.SetDataSource(_QCInspectionObjDataList, true);
_CSTWIPCMMDataList = new List <CSTWIPCMMDataInfo>();
gvInspectionData.SetDataSource(_CSTWIPCMMDataList, true);
btnOK.Enabled = false;
AjaxFocus(ddlDevice);
HandleError(ex);
}
}
/// <summary>
/// 輸入模具編號
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
protected void ttbToolName_TextChanged(object sender, EventArgs e)
{
try
{
string equipmentName = "";
_ToolData = ToolInfo.GetToolByName(ttbToolName.Text);
#region 驗證模治具號正確性
if (_ToolData == null)
{
//模治具：{0}不存在，請確認資料正確性
throw new Exception(RuleMessage.Error.C10029(ttbToolName.Text));
}
#endregion
#region 驗證模治具啟用狀態
if (_ToolData.UsingStatus == UsingStatus.Disable)
{
//模治具：{0}已停用，如需使用，請至"配件資料維護"啟用!!
throw new Exception(RuleMessage.Error.C10030(ttbToolName.Text));
}
#endregion
#region 驗證模治具是否在別的機台上，如是要報錯
var equipToolDataList = EquipToolInfo.GetByToolName(_ToolData.ToolName);
if (equipToolDataList.Count == 0)
{
//模治具：{0}不在機台上，不須下機!!
throw new Exception(RuleMessage.Error.C10031(ttbToolName.Text));
}
equipmentName = equipToolDataList[0].EquipmentName;
#endregion
#region 機原因碼(DropDownList)：依照原因碼工作站設定，帶出原因碼
ddlCheckOutReasonCode.Items.Clear();
List <BusinessReason> reasonList = ReasonCategoryInfo.GetOperationRuleCategoryReasonsWithReasonDescr(ProgramRight, "ALL", "Default", ReasonMode.Category);
if (reasonList.Count > 0)
{
ddlCheckOutReasonCode.DataSource = reasonList;
ddlCheckOutReasonCode.DataTextField = "ReasonDescription";
ddlCheckOutReasonCode.DataValueField = "ReasonCategorySID";
ddlCheckOutReasonCode.DataBind();
if (ddlCheckOutReasonCode.Items.Count != 1)
{
ddlCheckOutReasonCode.Items.Insert(0, "");
}
else
{
ddlCheckOutReasonCode.SelectedIndex = 0;
}
}
else
{
//[00641]規則:{0} 工作站:{1} 使用的原因碼未設定，請洽IT人員!
throw new Exception(TextMessage.Error.T00641(ProgramRight, "ALL"));
}
#endregion
ttbToolDescr.Text = _ToolData.Description;
ttbToolType.Text = _ToolData.ToolType;
ttbEquip.Text = equipmentName;
btnOK.Enabled = true;
}
catch (Exception ex)
{
ClearField();
AjaxFocus(ttbToolName);
HandleError(ex);
}
}