static public void GetCenter()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptEntityOptions peopt = new PromptEntityOptions("\nSelect curve to get center : ");
peopt.SetRejectMessage("\nSelect only a curve.");
peopt.AddAllowedClass(typeof(Circle), false);
peopt.AddAllowedClass(typeof(Arc), false);
peopt.AllowNone = false;
PromptEntityResult peres = ed.GetEntity(peopt);
using (Transaction tx = db.TransactionManager.StartTransaction())
{
BlockTableRecord btrec = tx.GetObject(peres.ObjectId, OpenMode.ForRead) as BlockTableRecord;
Entity en = tx.GetObject(btrec.ObjectId, OpenMode.ForRead) as Entity;
if (en is Arc)
{
}
if (en is Circle)
{
}
}
}
private static PromptEntityResult PromptSourceEntity(Document doc, ref bool deleteSource)
{
// Выберите объект-исходник (текст, выноска, таблица или размер):
var peo = new PromptEntityOptions($"\n{Language.GetItem(LangItem, "msg1")}");
peo.SetMessageAndKeywords($"\n{Language.GetItem(LangItem, "msg2")}", "Delete");
peo.AppendKeywordsToMessage = true;
peo.SetRejectMessage($"\n{Language.GetItem(LangItem, "msg3")}");
peo.AddAllowedClass(typeof(DBText), false);
peo.AddAllowedClass(typeof(MText), false);
peo.AddAllowedClass(typeof(MLeader), false);
peo.AddAllowedClass(typeof(Table), false);
peo.AddAllowedClass(typeof(Dimension), false);
peo.AllowNone = true;
var per = doc.Editor.GetEntity(peo);
if (per.Status == PromptStatus.Keyword)
{
// Удалять объект-исходник (для таблиц - содержимое ячейки)?
deleteSource = MessageBox.ShowYesNo(Language.GetItem(LangItem, "msg4"), MessageBoxIcon.Question);
// Сохраняем текущее значение как значение по умолчанию
ModPlus.Helpers.XDataHelpers.SetStringXData("mpTxtCopyPaste", deleteSource.ToString());
return(PromptSourceEntity(doc, ref deleteSource));
}
if (per.Status == PromptStatus.OK)
{
return(per);
}
throw new OperationCanceledException();
}
selectEntity(string message, string reject, out bool escape)
{
escape = true;
ObjectId idEnt = ObjectId.Null;
BaseObjs.acadActivate();
PromptEntityOptions PEOS = new PromptEntityOptions(message);
PEOS.SetRejectMessage(reject);
PEOS.AddAllowedClass(typeof(Line), true);
PEOS.AddAllowedClass(typeof(Arc), true);
PEOS.AddAllowedClass(typeof(Polyline), true);
PEOS.AllowNone = false;
PromptEntityResult PER = BaseObjs._editor.GetEntity(PEOS);
if (PER.Status == PromptStatus.OK)
{
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
Entity ENT = (Entity)tr.GetObject(PER.ObjectId, OpenMode.ForRead);
idEnt = ENT.ObjectId;
escape = false;
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " Select.cs: line: 635");
}
}
return(idEnt);
}
private static bool GetNumberOfFloors(Editor ed, ref int numberOfFloors)
{
// Select text (or type number of floors)
PromptEntityOptions entityOptions = new PromptEntityOptions("\nSelect Text (or Enter to skip): ");
entityOptions.SetRejectMessage("Not Text or MText");
entityOptions.AddAllowedClass(typeof(DBText), true);
entityOptions.AddAllowedClass(typeof(MText), true);
entityOptions.AllowNone = true;
PromptEntityResult entityResult = ed.GetEntity(entityOptions);
if (entityResult.Status == PromptStatus.None)
{
PromptIntegerOptions integerOptions = new PromptIntegerOptions("\nEnter number of floors:");
integerOptions.DefaultValue = 1;
PromptIntegerResult integerResult = ed.GetInteger(integerOptions);
if (integerResult.Status != PromptStatus.OK)
{
return(false);
}
numberOfFloors = integerResult.Value;
}
else if (entityResult.Status != PromptStatus.OK)
{
return(false);
}
else
{
using (DBObject obj = entityResult.ObjectId.Open(OpenMode.ForRead))
{
DBText t1 = obj as DBText;
MText t2 = obj as MText;
string s = null;
if (t1 != null)
{
s = t1.TextString;
}
else if (t2 != null)
{
s = t2.Text;
}
else
{
throw new NotSupportedException("Entity not supported!");
}
if (!string.IsNullOrEmpty(s))
{
numberOfFloors = FloorCount.GetCount(s);
}
ed.WriteMessage($"\nNumber of floors: {numberOfFloors}");
}
}
return(true);
}
private static PromptEntityOptions GetDestinationEntityOptions()
{
// Выберите объект (текст, выноска или таблица) для замены содержимого:
var peo = new PromptEntityOptions($"\n{Language.GetItem(LangItem, "msg5")}");
peo.SetRejectMessage($"\n{Language.GetItem(LangItem, "msg3")}");
peo.AddAllowedClass(typeof(DBText), false);
peo.AddAllowedClass(typeof(MText), false);
peo.AddAllowedClass(typeof(MLeader), false);
peo.AddAllowedClass(typeof(Table), false);
peo.AllowNone = false;
return(peo);
}
selectEntity(System.Type classType, string message, string reject, out Point3d pnt3dPicked, out PromptStatus ps)
{
Entity ent = null;
BaseObjs.acadActivate();
PromptEntityOptions peos = new PromptEntityOptions(message);
peos.SetRejectMessage(reject);
peos.AddAllowedClass(classType, true);
peos.AllowNone = true;
PromptEntityResult per = BaseObjs._editor.GetEntity(peos);
pnt3dPicked = per.PickedPoint;
ps = per.Status;
switch (ps)
{
case PromptStatus.OK:
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
ent = (Entity)tr.GetObject(per.ObjectId, OpenMode.ForRead);
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " Select.cs: line: 599");
}
break;
}
return(ent);
}
public SampleLine GetSampleLine()
{
PromptEntityOptions peo = new PromptEntityOptions("\nSelect the SampleLine");
peo.SetRejectMessage("\nOnly SampleLine");
peo.AddAllowedClass(typeof(SampleLine), true);
PromptEntityResult res = Ed.GetEntity(peo);
if (res.Status != PromptStatus.OK)
{
return(null);
}
using (Transaction ts = Dwg.TransactionManager.StartTransaction())
{
try
{
SampleLine smpLine = ts.GetObject(res.ObjectId, OpenMode.ForRead) as SampleLine;
return(smpLine);
}
catch (System.Exception)
{
throw;
}
}
}
public void SolMassProp()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
// The Database object contains all of the graphical and most of the nongraphical AutoCAD objects
Database db = doc.Database;
// Ask user to select a solid (which is an Entity)
// To prompt, we use the PromptXXXOptions class, where XXX is the value type we want to prompt
// (e.g. Angle, String, Distance, Entity ...)
PromptEntityOptions peo = new PromptEntityOptions("Select a 3D solid.");
// Set the message in case of an error (this MUST come before definind the allowed class)
peo.SetRejectMessage("\nA 3D solid must be selected.");
// Set the class of the entity we want to select
peo.AddAllowedClass(typeof(Solid3d), true);
// After creating the prompt, we actually show it using the GetXXX function of the Editor
PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK)
{
return;
}
ed.WriteMessage("Ok, cool, thanks.");
}
private Polyline GetSlopeLine(Editor ed, out bool cont)
{
var op = new PromptEntityOptions("\n选择一条边坡线以进行信息读写");
op.SetRejectMessage($"\n选择的多段线必须包含{SlopeData.AppName}的外部扩展数据");
op.AddAllowedClass(typeof(Polyline), exactMatch: true);
var res = ed.GetEntity(op);
cont = true;
if (res.Status == PromptStatus.OK)
{
var pl = res.ObjectId.GetObject(OpenMode.ForRead) as Polyline;
if (pl != null)
{
if (SlopeLine.IsSlopeLineLayer(pl.Layer, left: null))
{
cont = true;
return(pl);
}
}
}
else if (res.Status == PromptStatus.Cancel)
{
cont = false;
}
return(null);
}
selectPointEntity(string cmd, int osMode)
{
object mode = SnapMode.getOSnap();
SnapMode.setOSnap(osMode);
ObjectId idPnt = ObjectId.Null;
Database db = BaseObjs._db;
Editor ed = BaseObjs._editor;
PromptEntityOptions peo = new PromptEntityOptions(string.Format("\nSelect {0} Point:", cmd));
peo.AllowNone = false;
peo.SetRejectMessage("\nSelected Entity is not a Cogo Point.");
peo.AddAllowedClass(typeof(CogoPoint), true);
try
{
idPnt = ed.GetEntity(peo).ObjectId;
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(string.Format("{0} Pnt.cs: line: 118", ex.Message));
}
finally
{
SnapMode.setOSnap((int)mode);
}
return(idPnt);
}
public static BlockTableRecord GetBlockTableRecord(Document acDoc, string PromptMessage, string PromptRejectMessage)
{
Database acCurDb = acDoc.Database;
Editor acDocEd = acDoc.Editor;
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
PromptEntityOptions pEntOpt = new PromptEntityOptions("\n" + PromptMessage);
pEntOpt.SetRejectMessage("\n" + PromptRejectMessage);
pEntOpt.AddAllowedClass(typeof(BlockReference), true);
PromptEntityResult pEntRes = acDocEd.GetEntity(pEntOpt);
if (pEntRes.Status == PromptStatus.OK)
{
Entity acEnt = (Entity)acTrans.GetObject(pEntRes.ObjectId, OpenMode.ForRead);
BlockReference acBlkRef = (BlockReference)acEnt;
BlockTableRecord acBlkTblRec;
if (!acBlkRef.IsDynamicBlock)
{
acBlkTblRec = (BlockTableRecord)acTrans.GetObject(acBlkRef.BlockTableRecord, OpenMode.ForRead);
}
else
{
acBlkTblRec = (BlockTableRecord)acTrans.GetObject(acBlkRef.DynamicBlockTableRecord, OpenMode.ForRead);
}
Application.ShowAlertDialog("Title block was chosen: " + acBlkTblRec.Name);
return(acBlkTblRec);
}
else
{
Application.ShowAlertDialog("Bạn đã thoát lệnh!");
return(null);
}
}
}
public static void test25()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
PromptEntityOptions opts = new PromptEntityOptions("\n请选择一个块:");
opts.SetRejectMessage("只能选择块参照");
opts.AddAllowedClass(typeof(BlockReference), false);
PromptEntityResult res = ed.GetEntity(opts);
if (res.Status != PromptStatus.OK)
{
return;
}
Database db = doc.Database;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockReference bref = tr.GetObject(res.ObjectId, OpenMode.ForRead) as BlockReference;
BlockTableRecord btr = tr.GetObject(bref.BlockTableRecord, OpenMode.ForRead) as BlockTableRecord;
foreach (ObjectId id in btr)
{
Entity ent = tr.GetObject(id, OpenMode.ForRead) as Entity;
ed.WriteMessage($"\n{ent.GetType().Name}");
//Circle cir = tr.GetObject(id, OpenMode.ForRead) as Circle;
//if (cir != null)
//{
// Point3d pt = cir.Center.TransformBy(bref.BlockTransform);
// ed.DrawPoint(pt.Convert2d(new Plane()), 1, 1, 8);
//}
}
}
}
/// <summary> 从 AutoCAD 界面中选择横断面轴线 </summary>
public static SubgradeSection GetSection(DocumentModifier docMdf)
{
SubgradeSection sec = null;
var op = new PromptEntityOptions("\n选择要提取的横断面轴线");
op.AddAllowedClass(typeof(Line), true);
var res = docMdf.acEditor.GetEntity(op);
if (res.Status == PromptStatus.OK)
{
var line = res.ObjectId.GetObject(OpenMode.ForRead) as Line;
if (line != null && line.Layer == Options_LayerNames.LayerName_CenterAxis)
{
var si = SectionInfo.FromCenterLine(line);
if (si != null && si.FullyCalculated)
{
sec = new SubgradeSection(docMdf, line, si);
}
else
{
MessageBox.Show($"选择的道路中心线对象所对应的横断面未进行构造，" +
$"\r\n请先调用“{SectionsConstructor.CommandName}”命令，以构造整个项目的横断面系统。",
"提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
}
return(sec);
}
public Alignment GetAlignment()
{
PromptEntityOptions opt = new PromptEntityOptions("\nSelect the Alignment:");
opt.SetRejectMessage("\nOnly alignment");
opt.AddAllowedClass(typeof(Alignment), true);
PromptEntityResult res = Ed.GetEntity(opt);
if (res.Status != PromptStatus.OK)
{
return(null);
}
;
using (Transaction ts = Dwg.TransactionManager.StartTransaction())
{
try
{
Alignment al = ts.GetObject(res.ObjectId, OpenMode.ForRead) as Alignment;
return(al);
}
catch (System.Exception)
{
throw;
}
}
}
/// <summary> 从界面中选择一个块参照 </summary>
public static BlockReference PickBlockReference()
{
// 创建一个 TypedValue 数组，用于定义过滤条件
var filterTypes = new TypedValue[]
{
new TypedValue((int)DxfCode.Start, "INSERT"),
};
// Create our options object
var op = new PromptEntityOptions("\n请选择一个块参照对象");
op.SetRejectMessage("请选择一个块参照对象");
op.AddAllowedClass(typeof(BlockReference), true);
//获取当前文档编辑器
Editor acDocEd = Application.DocumentManager.MdiActiveDocument.Editor;
// 请求在图形区域选择对象
var res = acDocEd.GetEntity(op);
// 如果提示状态OK，表示对象已选
if (res.Status == PromptStatus.OK)
{
var obj = res.ObjectId.GetObject(OpenMode.ForRead) as BlockReference;
if (obj != null)
{
return(obj);
}
}
return(null);
}
TestImageAngle()
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
PromptEntityOptions prOpts = new PromptEntityOptions("\nSelect an Image");
prOpts.SetRejectMessage("\nSelected entity must by of type RasterImage");
prOpts.AddAllowedClass(typeof(RasterImage), false);
PromptEntityResult prRes = ed.GetEntity(prOpts);
if (prRes.Status == PromptStatus.OK)
{
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = prRes.ObjectId.Database.TransactionManager;
using (Autodesk.AutoCAD.DatabaseServices.Transaction tr = tm.StartTransaction()) {
RasterImage imgObj = (RasterImage)tr.GetObject(prRes.ObjectId, OpenMode.ForRead);
CoordinateSystem3d entEcs = imgObj.Orientation;
Vector3d arbXAxis = Utils.Db.GetEcsXAxis(entEcs.Zaxis); // get AutoCAD's arbitrary X-Axis
double rotAngle1 = arbXAxis.GetAngleTo(entEcs.Xaxis, entEcs.Zaxis);
ed.WriteMessage(string.Format("\nECS rotation angle: {0}", Autodesk.AutoCAD.Runtime.Converter.AngleToString(rotAngle1, AngularUnitFormat.Current, -1)));
Plane ucsPlane = Utils.Db.GetUcsPlane(prRes.ObjectId.Database);
double rotAngle2 = entEcs.Xaxis.AngleOnPlane(ucsPlane);
ed.WriteMessage(string.Format("\nRotation angle relative to UCS: {0}", Autodesk.AutoCAD.Runtime.Converter.AngleToString(rotAngle2, AngularUnitFormat.Current, -1)));
tr.Commit();
}
}
}
public Profile GetProfile()
{
PromptEntityOptions peo = new PromptEntityOptions("\nSelect the profile view");
peo.SetRejectMessage("\nOnly profile view");
peo.AddAllowedClass(typeof(Profile), true);
PromptEntityResult res = Ed.GetEntity(peo);
if (res.Status != PromptStatus.OK)
{
return(null);
}
using (Transaction ts = Dwg.TransactionManager.StartTransaction())
{
try
{
Profile prf = ts.GetObject(res.ObjectId, OpenMode.ForRead) as Profile;
return(prf);
}
catch (System.Exception)
{
throw;
}
}
}
static public void GetObjectMng()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptEntityOptions peo = new PromptEntityOptions("\nSelect custom object: ");
peo.SetRejectMessage("\nInvalid selection...");
peo.AddAllowedClass(typeof(asdkCustomCircleMgd), true);
PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK)
{
return;
}
using (Transaction Tx = db.TransactionManager.StartTransaction())
{
asdkCustomCircleMgd entity = Tx.GetObject(per.ObjectId, OpenMode.ForWrite)
as asdkCustomCircleMgd;
entity.ColorIndex = 1;
Tx.Commit();
}
}
private string _getTextFromEntity <T>(string msg, string rmsg)
where T : DBObject
{
PromptEntityOptions entOpt = new PromptEntityOptions(msg);
entOpt.SetRejectMessage(rmsg);
entOpt.AllowNone = false;
entOpt.AddAllowedClass(typeof(T), true);
PromptEntityResult entRes = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.GetEntity(entOpt);
if (entRes.Status != PromptStatus.OK)
{
return(null);
}
var id = entRes.ObjectId;
if (id.IsNull)
{
return(null);
}
using (Transaction trans = Tools.StartTransaction())
{
System.Reflection.MethodInfo mi = typeof(T).GetMethod("TextString");
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.WriteMessage(mi.ReturnParameter.Name);
object obj = trans.GetObject(id, OpenMode.ForRead);
string data = mi.Invoke((DBObject)obj, null) as string;
return(data);
}
}
private string _getDbTextString(string msg, string rmsg)
{
PromptEntityOptions entOpt = new PromptEntityOptions(msg);
entOpt.SetRejectMessage(rmsg);
entOpt.AllowNone = false;
entOpt.AddAllowedClass(typeof(DBText), true);
PromptEntityResult entRes = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor.GetEntity(entOpt);
if (entRes.Status != PromptStatus.OK)
{
return(null);
}
var id = entRes.ObjectId;
if (id.IsNull)
{
return(null);
}
using (Transaction trans = Tools.StartTransaction())
{
string data = ((DBText)trans.GetObject(id, OpenMode.ForRead)).TextString;
return(data);
}
}
private void GetPoint(object s, EventArgs e)
{
_ = ParentProcessUtilities.GetParentProcess();
var doc = AcApp.DocumentManager.MdiActiveDocument;
_ = doc.Editor;
_ = new PromptSelectionOptions
{
AllowDuplicates = false
};
PromptEntityOptions peo = new PromptEntityOptions("Select a point.");
peo.AddAllowedClass(typeof(CogoPoint), true);
peo.AddAllowedClass(typeof(Autodesk.AutoCAD.Geometry.Point3d), true);
}
public void TestWEdding()
{
var doc = Application.DocumentManager.MdiActiveDocument;
var db = doc.Database;
var ed = doc.Editor;
var selOpt = new PromptEntityOptions("\nВыбери полилинию для прополки");
selOpt.SetRejectMessage("\nТолько полилинию");
selOpt.AddAllowedClass(typeof(Polyline), true);
var selRes = ed.GetEntity(selOpt);
if (selRes.Status != PromptStatus.OK)
{
return;
}
using (var t = db.TransactionManager.StartTransaction())
{
var pl = selRes.ObjectId.GetObject(OpenMode.ForWrite) as Polyline;
pl.TestDrawVertexNumbers(Color.FromColor(System.Drawing.Color.Green));
pl.Wedding(new Autodesk.AutoCAD.Geometry.Tolerance(0.02, 0.1));
pl.TestDrawVertexNumbers(Color.FromColor(System.Drawing.Color.Red));
t.Commit();
}
}
private void blockDwgBtn_Click(object sender, EventArgs e)
{
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Database db = doc.Database;
this.Hide();
PromptEntityOptions prmtOpt = new PromptEntityOptions("\n\nSelect block");
prmtOpt.SetRejectMessage("\n\nCan only select a block definition");
prmtOpt.AddAllowedClass(typeof(BlockReference), false);
PromptEntityResult result = ed.GetEntity(prmtOpt);
if (result.Status == PromptStatus.OK)
{
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockReference blkReference = tr.GetObject(result.ObjectId, OpenMode.ForRead) as BlockReference;
BlockTableRecord blockRecord = null;
if (blkReference.IsDynamicBlock)
{
blockRecord = tr.GetObject(blkReference.DynamicBlockTableRecord, OpenMode.ForRead) as BlockTableRecord;
}
else
{
blockRecord = tr.GetObject(blkReference.BlockTableRecord, OpenMode.ForRead) as BlockTableRecord;
}
blockName = blockRecord.Name;
blockDwgBtn.Text = blockRecord.Name;
this.Show();
this.Focus();
plotButton.Enabled = true;
}
}
}
public static List <Block> SelectBlock(string message)
{
PromptEntityOptions options = new PromptEntityOptions(message);
options.SetRejectMessage("\nThe selected object is not a Block.\n");
options.AddAllowedClass(typeof(BlockReference), false);
PromptEntityResult peo = Active.Editor.GetEntity(options);
List <Block> result = null;
using (Transaction tr = Active.Database.TransactionManager.StartTransaction())
{
switch (peo.Status)
{
case PromptStatus.OK:
BlockReference br = tr.GetObject(peo.ObjectId, OpenMode.ForRead) as BlockReference;
result = Block.GetAttributesInBlock(tr, br);
break;
case PromptStatus.Cancel:
Active.Editor.WriteMessage("Select canceled");
return(null);
}
tr.Commit();
return(result);
}
}
/// <summary>
/// 사용자가 선택한 객체를 가져오는 메소드 입니다.
/// </summary>
/// <param name="message">선택 전, 프롬프트에 표시할 메시지</param>
/// <param name="Filter">선택이 가능하게 할 객체의 종류(클래스)</param>
/// <returns>선택한 객체의 ObjectId를 리턴하며, ESC 등의 취소를 받았을 경우, ObjectId.Null 값을 리턴합니다.</returns>
public static ObjectId GetEntity(string message = "객체 선택", params Type[] Filter)
{
ActivateApplication();
Document doc = AcadApp.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptEntityOptions peo = new PromptEntityOptions("\n" + message);
peo.SetRejectMessage("\n" + sRejectMsg);
foreach (Type tType in Filter)
{
peo.AddAllowedClass(tType, true);
}
PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK)
{
return(ObjectId.Null);
}
return(per.ObjectId);
}
public static void ExplodeToOwnerSpace()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptEntityOptions options = new PromptEntityOptions("\nSelect block reference");
options.SetRejectMessage("\nSelect only block reference");
options.AddAllowedClass(typeof(BlockReference), false);
PromptEntityResult acSSPrompt = ed.GetEntity(options);
using (Transaction tx = db.TransactionManager.StartTransaction())
{
BlockReference blockRef = tx.GetObject(acSSPrompt.ObjectId, OpenMode.ForRead) as BlockReference;
//add event
ids.Clear();
db.ObjectAppended += new ObjectEventHandler(db_ObjectAppended);
blockRef.ExplodeToOwnerSpace();
//remove event
db.ObjectAppended -= new ObjectEventHandler(db_ObjectAppended);
foreach (ObjectId id in ids)
{
//get each entity....
ed.WriteMessage("\n" + id.ToString());
}
tx.Commit();
}
}
public void FilterBlocks()
{
Document doc = Active.Document;
Database db = doc.Database;
Editor ed = doc.Editor;
PromptEntityOptions opts = new PromptEntityOptions("\nSelect a block: ");
opts.SetRejectMessage("Only a block.");
opts.AddAllowedClass(typeof(BlockReference), true);
PromptEntityResult per = ed.GetEntity(opts);
if (per.Status != PromptStatus.OK)
{
return;
}
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockReference br = (BlockReference)tr.GetObject(per.ObjectId, OpenMode.ForRead);
blockName = GetEffectiveName(br);
TypedValue[] filterList = new TypedValue[3]
{
new TypedValue(0, "INSERT"),
new TypedValue(2, "`*U*," + blockName),
new TypedValue(8, br.Layer)
};
ed.SelectionAdded += onSelectionAdded;
PromptSelectionResult psr = ed.SelectAll(new SelectionFilter(filterList));
ed.SelectionAdded -= onSelectionAdded;
ed.SetImpliedSelection(psr.Value);
ed.WriteMessage("\nNumber of selected objects: {0}", psr.Value.Count);
tr.Commit();
}
}
public Corridor OdabraniCorridor()
{
using (Transaction tr = db.TransactionManager.StartTransaction())
{
try
{
PromptEntityOptions prEntOpts = new PromptEntityOptions("\nOdaberite corridor plovnog puta: ");
prEntOpts.AllowNone = true;
prEntOpts.SetRejectMessage("\nOdabrani objekat mora biti corridor");
prEntOpts.AddAllowedClass(typeof(Corridor), true);
PromptEntityResult prEntRes = ed.GetEntity(prEntOpts);
if (prEntRes.Status != PromptStatus.OK)
{
return(null);
}
else
{
Corridor cor = tr.GetObject(prEntRes.ObjectId, OpenMode.ForRead) as Corridor;
ed.WriteMessage("\n Odabrali ste corridor imena: " + cor.Name);
tr.Commit();
return(cor);
}
}
catch (System.Exception ex)
{
ed.WriteMessage("Error encountered: " + ex.Message);
tr.Abort();
return(null);
}
}
}
public void DimRadiusArrowStyle()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
Arc arc = new Arc(); //初始化圆弧
using (Transaction trans = db.TransactionManager.StartTransaction()) //开始事务处理
{
//1.选择圆弧
PromptEntityOptions arcOpt = new PromptEntityOptions("\n选择圆弧");
arcOpt.SetRejectMessage("请选择圆弧对象！");
arcOpt.AddAllowedClass(typeof(Arc), false);
PromptEntityResult arcRes = ed.GetEntity(arcOpt);
if (arcRes.Status != PromptStatus.OK)
{
return;
}
arc = arcRes.ObjectId.GetObject(OpenMode.ForRead) as Arc;
CircularArc3d arc3d = new CircularArc3d(arc.StartPoint, arc.Center.PolarPoint((arc.StartAngle + arc.EndAngle) / 2, arc.Radius), arc.EndPoint);
//2.设置标注比例
PromptDoubleOptions scaleOpt = new PromptDoubleOptions($"\n设置标注比例<{scale}>");
scaleOpt.AllowNegative = false;
scaleOpt.AllowZero = false;
scaleOpt.AllowNone = true;
PromptDoubleResult scaleRes = ed.GetDouble(scaleOpt);
if (scaleRes.Status == PromptStatus.OK)
{
scale = scaleRes.Value;
}
//3.绘制圆弧半径箭头标注
db.ArrowRadiusDim(arc3d, scale);
trans.Commit();//执行事务处理
}
}
static public void Test()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
Transaction tr = db.TransactionManager.StartTransaction();
using (tr)
{
try
{
// Prompt for selection of a solid to be traversed
PromptEntityOptions prEntOpt = new PromptEntityOptions("\nSelect a 3D solid:");
prEntOpt.SetRejectMessage("\nMust be a 3D solid.");
prEntOpt.AddAllowedClass(typeof(Solid3d), true);
PromptEntityResult prEntRes = ed.GetEntity(prEntOpt);
Solid3d sol = (Solid3d)tr.GetObject(prEntRes.ObjectId, OpenMode.ForRead);
Acad3DSolid oSol = (Acad3DSolid)sol.AcadObject;
ed.WriteMessage("\nSolid type: {0}", oSol.SolidType);
//ElementCollection result = SolidOperator.Analyze(sol);
//ed.WriteMessage("\nElement count: {0}", result.Elements.Count);
}
catch (System.Exception ex)
{
ed.WriteMessage("\nException during analysis: {0}", ex.Message);
}
}
}
public void BeginTriangulate()
{
buildTriangulations buildT = new buildTriangulations();
AC_Transactions tr = new AC_Transactions();
PromptEntityOptions options = new PromptEntityOptions("Pick a Line to Triangulate");
options.SetRejectMessage("not valid Object \n");
options.AddAllowedClass(typeof(Line), true);
PromptEntityResult sel = tr.AC_Doc.Editor.GetEntity(options);
if (sel.Status == PromptStatus.OK)
{
tr.AC_Doc.Editor.WriteMessage("Line " + sel.ObjectId.ToString() + " Selected \n");
buildT.Create((AC_Line)tr.openObjectErased(sel.ObjectId));
}
}
public void TestWEdding()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
var selOpt = new PromptEntityOptions("\nВыбери полилинию для прополки");
selOpt.SetRejectMessage("\nТолько полилинию");
selOpt.AddAllowedClass(typeof(Polyline), true);
var selRes = ed.GetEntity(selOpt);
if (selRes.Status != PromptStatus.OK) return;
using (var t = db.TransactionManager.StartTransaction())
{
var pl = selRes.ObjectId.GetObject(OpenMode.ForWrite) as Polyline;
pl.TestDrawVertexNumbers(Color.FromColor(System.Drawing.Color.Green));
pl.Wedding(new Autodesk.AutoCAD.Geometry.Tolerance (0.02,0.1));
pl.TestDrawVertexNumbers(Color.FromColor(System.Drawing.Color.Red));
t.Commit();
}
}
public static String PromptSelectAlignment(String alignmentStatus)
{
String algnName = "";
try
{
using (var tr = AcadApp.StartTransaction())
{
var opt = new PromptEntityOptions("\nВыберите " + alignmentStatus + " трассу: ");
opt.SetRejectMessage("\nОбъект должен быть трассой.\n");
opt.AddAllowedClass(typeof(Alignment), false);
var ent = AcadApp.AcaEd.GetEntity(opt);
if (ent.Status == PromptStatus.OK)
{
var alignId = ent.ObjectId;
if (alignId == ObjectId.Null)
{
return "";
}
var curAlgn = tr.GetObject(alignId, OpenMode.ForRead) as Alignment;
algnName = curAlgn.Name;
return algnName; // All OK. Return alignment name
} // If PromptStatus.OK
}
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
AcadApp.AcaEd.WriteMessage("ERROR: CivApp.PromptSelectAlignment()\n" + ex + "\n");
}
return ""; //There have been some errors
}
public void getang()
{
Autodesk.AutoCAD.ApplicationServices.Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
string filepath = "D:\\tdoc.docx";
using (WordprocessingDocument docX = WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
try
{
// Add a main document part.
MainDocumentPart mainPart = docX.AddMainDocumentPart();
StyleDefinitionsPart styleDefinitionsPart = mainPart.AddNewPart<StyleDefinitionsPart>();
Styles styles1 = new Styles();
DocDefaults docDefaults =
new DocDefaults(
new RunPropertiesDefault(new RunPropertiesBaseStyle(new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
}, new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" })),
new ParagraphPropertiesDefault(new SpacingBetweenLines() { After = "0", Line = "240", LineRule = LineSpacingRuleValues.Auto }));
styles1.AppendChild(docDefaults);
styleDefinitionsPart.Styles = styles1;
mainPart.Document = new DocumentFormat.OpenXml.Wordprocessing.Document();
DocumentFormat.OpenXml.Wordprocessing.Body body = mainPart.Document.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Body());
ParagraphProperties paragraphProperties1 = new ParagraphProperties(
new Justification() { Val = JustificationValues.Center },
new ParagraphMarkRunProperties(
new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
},
new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" }
));
Paragraph para = body.AppendChild(new Paragraph());
para.AppendChild(paragraphProperties1);
Run run = para.AppendChild(new Run());
RunProperties runProperties1 = new RunProperties(
new Bold());
// String msg contains the text, "Hello, Word!"
run.AppendChild(runProperties1);
run.AppendChild(new Text("ПРИЛОЖЕНИЕ Ф"));
run.AppendChild(new Break());
run.AppendChild(new Text("Ведомость углов поворотов"));
run.AppendChild(new Break());
var table = new DocumentFormat.OpenXml.Wordprocessing.Table();
// Create a TableProperties object and specify its border information.
TableProperties tblProp = new TableProperties(
new TableWidth() { Width = "9782", Type = TableWidthUnitValues.Dxa },
new TableIndentation() { Width = -318, Type = TableWidthUnitValues.Dxa },
new TableBorders(
new TopBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new BottomBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new LeftBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new RightBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideHorizontalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideVerticalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 }),
new DocumentFormat.OpenXml.Wordprocessing.TableStyle() { Val = "TableGrid" }
);
// Append the TableProperties object to the empty table.
table.AppendChild<TableProperties>(tblProp);
// Add 3 columns to the table.
TableGrid tg = new TableGrid(new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn(),
new GridColumn(), new GridColumn(), new GridColumn());
table.AppendChild(tg);
TableRow tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 430 }),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1709" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Обозначение точки")))),
//new TableCellProperties(new TableCellWidth() {Type = TableWidthUnitValues.Pct, Width = "500"})
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "3922" }),
new Paragraph(
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }),
new Run(new Text("Координаты точки")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1358" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new VerticalMerge() { Val = MergedCellValues.Restart }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Пикетаж")))),
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "2368" }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Угол")))),
new TableCell(new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "425" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Прямая вставка, м"))))
);
table.AppendChild(tr1);
TableRow tr2 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 419 }),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("Y")))),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("X")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1260" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Лево")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1108" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Право")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())));
table.AppendChild(tr2);
TableCellProperties tcp = new TableCellProperties(new GridSpan() { Val = 7 });
while (true)
{
double dist = 0, paste = 0;
table.AppendChild(new TableRow(
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 7 }),
new Paragraph(
new ParagraphProperties(
new ParagraphMarkRunProperties(new Bold()),
new Justification() { Val = JustificationValues.Center }),
new Run(new RunProperties(
new Bold()),
new Text("Трасса"))))));
PromptEntityOptions peo = new PromptEntityOptions("\nВыбери polyline: ");
peo.SetRejectMessage("Можно только polyline.");
peo.AddAllowedClass(typeof(Polyline), true);
PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK) { break; }
PromptPointResult pPtRes;
PromptPointOptions pPtOpts = new PromptPointOptions("");
// Prompt for the start point
pPtOpts.Message = "\nВведи начало: ";
pPtRes = doc.Editor.GetPoint(pPtOpts);
PromptDoubleOptions getpik = new PromptDoubleOptions("\nВведи пикетаж (в формате числа, а не 0+00): ");
PromptDoubleResult getpikRes = doc.Editor.GetDouble(getpik);
dist = 100 * getpikRes.Value;
/*
PromptStringOptions pStrOpts = new PromptStringOptions("\nEnter your name: ");
pStrOpts.AllowSpaces = true;
PromptResult pStrRes = doc.Editor.GetString(pStrOpts);
Application.ShowAlertDialog("The name entered was: " + pStrRes.StringResult);
*/
Point3d curr = pPtRes.Value, next = pPtRes.Value;
try
{
using (Transaction tr = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tr.GetObject(per.ObjectId, OpenMode.ForRead);
if ((pPtRes.Value == pline.GetLineSegmentAt(0).StartPoint) || (pPtRes.Value == pline.GetLineSegmentAt(0).EndPoint))
for (int i = 0; i < pline.NumberOfVertices - 2; i++)
{
TrassaRecord temp = new TrassaRecord();
temp.Name = "ВТ" + (i + 1).ToString();
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.StartPoint.X, l1.StartPoint.Y);
next = l1.StartPoint;
temp.CoordsX = l1.StartPoint.X.ToString("F");
temp.CoordsY = l1.StartPoint.Y.ToString("F");
}
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.EndPoint.X, l1.EndPoint.Y);
next = l1.EndPoint;
temp.CoordsX = l1.EndPoint.X.ToString("F");
temp.CoordsY = l1.EndPoint.Y.ToString("F");
}
angle = -(angle - Math.PI * 2.0) * 180.0 / Math.PI;
ed.WriteMessage("{0},{1:0}", (int)angle / 1, (angle % 1) * 60);
temp.AngleT = TrassaRecord.Angle.Right;
temp.AngleVal = ((int)angle / 1).ToString("F0") + "°" + ((angle % 1) * 60).ToString("F0") + "’";
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.StartPoint.X, l1.StartPoint.Y);
next = l1.StartPoint;
temp.CoordsX = l1.StartPoint.X.ToString("F");
temp.CoordsY = l1.StartPoint.Y.ToString("F");
}
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.EndPoint.X, l1.EndPoint.Y);
next = l1.EndPoint;
temp.CoordsX = l1.EndPoint.X.ToString("F");
temp.CoordsY = l1.EndPoint.Y.ToString("F");
}
angle = angle * 180.0 / Math.PI;
ed.WriteMessage("{0},{1:0}", (int)angle / 1, (angle % 1) * 60);
temp.AngleT = TrassaRecord.Angle.Left;
temp.AngleVal = ((int)angle / 1).ToString("F0") + "°" + ((angle % 1) * 60).ToString("F0") + "’";
}
paste = curr.DistanceTo(next);
dist += paste;
curr = next;
ed.WriteMessage(" {0:0.00} {1:0.00}", dist, paste);
temp.Piketaz = ((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F");
temp.DirectInsert = paste.ToString("F");
tr2 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run(new Text(temp.DirectInsert))))
);
table.AppendChild(tr2);
tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run(new Text(temp.Name)))),
new TableCell(new Paragraph(new Run(new Text(temp.CoordsX)))),
new TableCell(new Paragraph(new Run(new Text(temp.CoordsY)))),
new TableCell(new Paragraph(new Run(new Text(temp.Piketaz)))),
new TableCell(new Paragraph(new Run(new Text((temp.AngleT == TrassaRecord.Angle.Left) ? temp.AngleVal.ToString() : "")))),
new TableCell(new Paragraph(new Run(new Text((temp.AngleT == TrassaRecord.Angle.Right) ? temp.AngleVal.ToString() : "")))),
new TableCell(new Paragraph(new Run()))
);
table.AppendChild(tr1);
}
else
for (int i = pline.NumberOfVertices - 3; i >= 0; i--)
{
TrassaRecord temp = new TrassaRecord();
temp.Name = "ВУ" + (pline.NumberOfVertices - 2 - i).ToString();
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.StartPoint.X, l1.StartPoint.Y);
next = l1.StartPoint;
temp.CoordsX = l1.StartPoint.X.ToString("F");
temp.CoordsY = l1.StartPoint.Y.ToString("F");
}
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.EndPoint.X, l1.EndPoint.Y);
next = l1.EndPoint;
temp.CoordsX = l1.EndPoint.X.ToString("F");
temp.CoordsY = l1.EndPoint.Y.ToString("F");
}
angle = -(angle - Math.PI * 2.0) * 180.0 / Math.PI;
ed.WriteMessage("{0},{1:0}", (int)angle / 1, (angle % 1) * 60);
temp.AngleT = TrassaRecord.Angle.Left;
temp.AngleVal = ((int)angle / 1).ToString("F0") + "°" + ((angle % 1) * 60).ToString("00") + "’";
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.StartPoint.X, l1.StartPoint.Y);
next = l1.StartPoint;
temp.CoordsX = l1.StartPoint.X.ToString("F");
temp.CoordsY = l1.StartPoint.Y.ToString("F");
}
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
{
ed.WriteMessage("\n({0:0.00}, {1:0.00}): ", l1.EndPoint.X, l1.EndPoint.Y);
next = l1.EndPoint;
temp.CoordsX = l1.EndPoint.X.ToString("F");
temp.CoordsY = l1.EndPoint.Y.ToString("F");
}
angle = angle * 180.0 / Math.PI;
ed.WriteMessage("{0},{1:0}", (int)angle / 1, (angle % 1) * 60);
temp.AngleT = TrassaRecord.Angle.Right;
temp.AngleVal = ((int)angle / 1).ToString("F0") + "°" + ((angle % 1) * 60).ToString("00") + "’";
}
paste = curr.DistanceTo(next);
dist += paste;
curr = next;
ed.WriteMessage(" {0:0.00} {1:0.00}", dist, paste);
temp.Piketaz = ((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F");
temp.DirectInsert = paste.ToString("F");
tr2 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run(new Text(temp.DirectInsert))))
);
table.AppendChild(tr2);
tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run(new Text(temp.Name)))),
new TableCell(new Paragraph(new Run(new Text(temp.CoordsX)))),
new TableCell(new Paragraph(new Run(new Text(temp.CoordsY)))),
new TableCell(new Paragraph(new Run(new Text(temp.Piketaz)))),
new TableCell(new Paragraph(new Run(new Text((temp.AngleT == TrassaRecord.Angle.Left) ? temp.AngleVal.ToString() : "")))),
new TableCell(new Paragraph(new Run(new Text((temp.AngleT == TrassaRecord.Angle.Right) ? temp.AngleVal.ToString() : "")))),
new TableCell(new Paragraph(new Run()))
);
table.AppendChild(tr1);
}
}
}
catch
{
ed.WriteMessage("\nInvalid polyline.");
}
}
body.AppendChild(table);
body.AppendChild(
new SectionProperties(
new PageMargin()
{
Top = 1134,
Right = (UInt32Value)850U,
Bottom = 1134,
Left = (UInt32Value)1418U,
Header = (UInt32Value)708U,
Footer = (UInt32Value)708U,
Gutter = (UInt32Value)0U
}));
ed.WriteMessage("\nДокумент сохранен в D:\\tdoc.docx");
}
catch
{
ed.WriteMessage("\nError.");
}
}
}
public void GetIntersectionsRiver()
{
Database db = HostApplicationServices.WorkingDatabase;
Autodesk.AutoCAD.ApplicationServices.Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
Transaction tr = db.TransactionManager.StartTransaction();
#region For Word
string filepath = "D:\\intersections_rivers.docx";
using (WordprocessingDocument docX = WordprocessingDocument.Create(filepath, WordprocessingDocumentType.Document))
{
try
{
// Add a main document part.
MainDocumentPart mainPart = docX.AddMainDocumentPart();
StyleDefinitionsPart styleDefinitionsPart = mainPart.AddNewPart<StyleDefinitionsPart>();
Styles styles1 = new Styles();
DocDefaults docDefaults =
new DocDefaults(
new RunPropertiesDefault(new RunPropertiesBaseStyle(new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
}, new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" })),
new ParagraphPropertiesDefault(new SpacingBetweenLines() { After = "0", Line = "240", LineRule = LineSpacingRuleValues.Auto }));
styles1.AppendChild(docDefaults);
styleDefinitionsPart.Styles = styles1;
mainPart.Document = new DocumentFormat.OpenXml.Wordprocessing.Document();
DocumentFormat.OpenXml.Wordprocessing.Body body = mainPart.Document.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Body());
ParagraphProperties paragraphProperties1 = new ParagraphProperties(
new Justification() { Val = JustificationValues.Center },
new ParagraphMarkRunProperties(
new RunFonts()
{
Ascii = "Times New Roman",
HighAnsi = "Times New Roman",
ComplexScript = "Times New Roman"
},
new FontSize() { Val = "24" },
new FontSizeComplexScript() { Val = "24" }
));
Paragraph para = body.AppendChild(new Paragraph());
para.AppendChild(paragraphProperties1);
Run run = para.AppendChild(new Run());
RunProperties runProperties1 = new RunProperties(
new Bold());
// String msg contains the text, "Hello, Word!"
run.AppendChild(runProperties1);
run.AppendChild(new Text("ПРИЛОЖЕНИЕ"));
run.AppendChild(new Break());
run.AppendChild(new Text("Ведомость пересечений"));
run.AppendChild(new Break());
var table = new DocumentFormat.OpenXml.Wordprocessing.Table();
// Create a TableProperties object and specify its border information.
TableProperties tblProp = new TableProperties(
new TableWidth() { Width = "9782", Type = TableWidthUnitValues.Dxa },
new TableIndentation() { Width = -318, Type = TableWidthUnitValues.Dxa },
new TableBorders(
new TopBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new BottomBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new LeftBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new RightBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideHorizontalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 },
new InsideVerticalBorder() { Val = new EnumValue<BorderValues>(BorderValues.Single), Size = 4, Space = 0 }),
new DocumentFormat.OpenXml.Wordprocessing.TableStyle() { Val = "TableGrid" }
);
// Append the TableProperties object to the empty table.
table.AppendChild<TableProperties>(tblProp);
// Add 3 columns to the table.
TableGrid tg = new TableGrid(new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn(),
new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn(), new GridColumn());
table.AppendChild(tg);
TableRow tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 430 }),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1709" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Наимен. водотока")))),
//new TableCellProperties(new TableCellWidth() {Type = TableWidthUnitValues.Pct, Width = "500"})
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "3922" }),
new Paragraph(
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }),
new Run(new Text("Пикетное положение пересечения")))),
new TableCell(
new TableCellProperties(
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }),
new Run(new Text("Ширина водотока в межень")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1358" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new VerticalMerge() { Val = MergedCellValues.Restart }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Глуб. водотока")))),
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 3 },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center },
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "2368" }),
new Paragraph(new ParagraphProperties(GetCenterJustify()),
new Run(new Text("Горизонт воды")))),
new TableCell(new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "425" },
new VerticalMerge() { Val = MergedCellValues.Restart },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Прим."))))
);
table.AppendChild(tr1);
TableRow tr2 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 419 }),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("От")))),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("До")))),
new TableCell(
new TableCellProperties(new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new ParagraphProperties(new Justification() { Val = JustificationValues.Center }), new Paragraph(new Run(new Text("половодье")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1260" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Дата съемки")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1108" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("На день съемки")))),
new TableCell(
new TableCellProperties(
new TableCellWidth() { Type = TableWidthUnitValues.Dxa, Width = "1108" },
new TableCellVerticalAlignment() { Val = TableVerticalAlignmentValues.Center }),
new Paragraph(new ParagraphProperties(GetCenterJustify()), new Run(new Text("Макс.")))),
new TableCell(new TableCellProperties(new VerticalMerge()), new Paragraph(new Run())));
table.AppendChild(tr2);
TableCellProperties tcp = new TableCellProperties(new GridSpan() { Val = 9 });
#endregion
while (true)
{
//using (tr)
//{
try
{
#region Поиск пересечений
BlockTableRecord btr = (BlockTableRecord)tr.GetObject(db.CurrentSpaceId, OpenMode.ForWrite);
PromptEntityOptions peo = new PromptEntityOptions("\nВыбери polyline >>");
peo.SetRejectMessage("\nМожно только polyline >>");
peo.AddAllowedClass(typeof(Polyline), false);
PromptEntityResult res;
res = ed.GetEntity(peo);
if (res.Status != PromptStatus.OK)
{
break;
}
DBObject ent = (DBObject)tr.GetObject(res.ObjectId, OpenMode.ForRead);
if (ent == null) return;
PromptPointResult pPtRes;
PromptPointOptions pPtOpts = new PromptPointOptions("");
// Prompt for the start point
pPtOpts.Message = "\nВведи начало: ";
pPtRes = doc.Editor.GetPoint(pPtOpts);
PromptDoubleOptions getpik = new PromptDoubleOptions("\nВведи пикетаж (в формате числа, а не 0+00): ");
PromptDoubleResult getpikRes = doc.Editor.GetDouble(getpik);
//zoom
/*PromptEntityResult per = ed.GetEntity(peo);
if (per.Status != PromptStatus.OK)
return;*/
// Extract its extents
Extents3d ext;
Transaction trans = db.TransactionManager.StartTransaction();
using (trans)
{
Entity enti = (Entity)trans.GetObject(res.ObjectId, OpenMode.ForRead);
ext = enti.GeometricExtents;
trans.Commit();
}
ext.TransformBy(ed.CurrentUserCoordinateSystem.Inverse());
ZoomWin(ed, ext.MinPoint, ext.MaxPoint);
//
//Polyline poly = (Polyline)ent as Polyline;
Curve curv = ent as Curve;
DBObjectCollection pcurves = new DBObjectCollection();
curv.Explode(pcurves);
TypedValue[] values = new TypedValue[]
{
new TypedValue(0, "lwpolyline")
//might be added layer name to select curve:
//, new TypedValue(8, "mylayer")
};
SelectionFilter filter = new SelectionFilter(values);
Point3dCollection fence = new Point3dCollection();
double leng = curv.GetDistanceAtParameter(curv.EndParam) - curv.GetDistanceAtParameter(curv.StartParam);
// number of divisions along polyline to create fence selection
double step = leng / 256;// set number of steps to your suit
int num = Convert.ToInt32(leng / step);
for (int i = 0; i < num; i++)
{
Point3d pp = curv.GetPointAtDist(step * i);
fence.Add(curv.GetClosestPointTo(pp, false));
}
PromptSelectionResult selres = ed.SelectFence(fence, filter);
if (selres.Status != PromptStatus.OK) return;
Point3dCollection intpts = new Point3dCollection();
DBObjectCollection qcurves = new DBObjectCollection();
//ed.WriteMessage("\nCheck");
foreach (SelectedObject selobj in selres.Value)
{
DBObject obj = tr.GetObject(selobj.ObjectId, OpenMode.ForRead, false) as DBObject;
if (selobj.ObjectId != curv.ObjectId)
{
DBObjectCollection icurves = new DBObjectCollection();
Curve icurv = obj as Curve;
icurv.Explode(icurves);
foreach (DBObject dbo in icurves)
{
if (!qcurves.Contains(dbo))
qcurves.Add(dbo);
}
}
}
//ed.WriteMessage("\n{0}", qcurves.Count);
int j = 0;
Point3dCollection polypts = new Point3dCollection();
for (int i = 0; i < pcurves.Count; ++i)
{
for (j = 0; j < qcurves.Count; ++j)
{
Curve curve1 = pcurves[i] as Curve;
Curve curve2 = qcurves[j] as Curve;
Point3dCollection pts = new Point3dCollection();
curve1.IntersectWith(curve2, Intersect.OnBothOperands, pts, IntPtr.Zero, IntPtr.Zero);
foreach (Point3d pt in pts)
{
if (!polypts.Contains(pt))
polypts.Add(pt);
}
}
}
#endregion
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
table.AppendChild(new TableRow(
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 9 }),
new Paragraph(
new ParagraphProperties(
new ParagraphMarkRunProperties(new Bold()),
new Justification() { Val = JustificationValues.Center }),
new Run(new RunProperties(
new Bold()),
new Text("ПК" + ((int)(getpikRes.Value)).ToString("F0") + "-ПК" +
((int)(100 * getpikRes.Value + pline.Length) / 100).ToString("F0") + "+" +
((100 * getpikRes.Value + pline.Length) % 100).ToString("F")))))));
}
}
catch { ed.WriteMessage("\nError."); }
Autodesk.AutoCAD.ApplicationServices.Application.SetSystemVariable("osmode", 0);// optional
// for debug only
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog(string.Format("\nНайдено пересечений: {0}", polypts.Count));
if (polypts.Count == 0)
{
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
table.AppendChild(new TableRow(
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 9 }),
new Paragraph(
new ParagraphProperties(
new Justification() { Val = JustificationValues.Center }),
new Run(new Text("На данном участке трассы пересечения отсутствуют"))))));
}
}
catch { ed.WriteMessage("\nError."); }
}
else
{
//List<double> pik = new List<double>(polypts.Count);
double[] pik = new double[polypts.Count];
int numInter = 0;
foreach (Point3d inspt in polypts)
{
double dist = 0;
dist = 100 * getpikRes.Value;
// test for visulization only
/*Circle circ = new Circle(inspt, Vector3d.ZAxis, 10 * db.Dimtxt);
circ.ColorIndex = 1;
btr.AppendEntity(circ);
tr.AddNewlyCreatedDBObject(circ, true);*/
Point3d curr = pPtRes.Value, next = pPtRes.Value;
try
{
using (Transaction tran = db.TransactionManager.StartTransaction())
{
Polyline pline = (Polyline)tran.GetObject(res.ObjectId, OpenMode.ForRead);
if ((pPtRes.Value == pline.GetLineSegmentAt(0).StartPoint) || (pPtRes.Value == pline.GetLineSegmentAt(0).EndPoint))
for (int i = 0; i < pline.NumberOfVertices - 2; i++)
{
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
if (Math.Abs(inspt.DistanceTo(curr) + inspt.DistanceTo(next) - curr.DistanceTo(next)) < 1)
{
dist += inspt.DistanceTo(curr);
ed.WriteMessage(((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F") + "\n");
break;
}
else
dist += curr.DistanceTo(next);
curr = next;
}
else
for (int i = pline.NumberOfVertices - 3; i >= 0; i--)
{
LineSegment3d l1 = pline.GetLineSegmentAt(i);
LineSegment3d l2 = pline.GetLineSegmentAt(i + 1);
double angle = GetPolylineShape(l1, l2, pline.Normal);
if (angle > Math.PI)
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
else
{
if ((l1.StartPoint == l2.StartPoint) || (l1.StartPoint == l2.EndPoint))
next = l1.StartPoint;
else if ((l1.EndPoint == l2.EndPoint) || (l1.EndPoint == l2.StartPoint))
next = l1.EndPoint;
}
if (Math.Abs(inspt.DistanceTo(curr) + inspt.DistanceTo(next) - curr.DistanceTo(next)) < 1)
{
dist += inspt.DistanceTo(curr);
ed.WriteMessage(((int)dist / 100).ToString("F0") + "+" + (dist % 100).ToString("F") + "\n");
break;
}
else
dist += curr.DistanceTo(next);
curr = next;
}
}
}
catch
{
ed.WriteMessage("\nInvalid polyline.");
}
pik[numInter] = dist;
numInter++;
//ed.WriteMessage(" {0:0.00}\n", dist);
}
//pik.Sort();
Array.Sort(pik);
for (int i = 0; i < polypts.Count; i++)
{
tr1 = new TableRow(
new TableRowProperties(new TableRowHeight() { Val = 300 }),
new TableCell(new Paragraph(new Run())),
new TableCell(
new TableCellProperties(
new GridSpan() { Val = 2 }),
new Paragraph(
new ParagraphProperties(
new Justification() { Val = JustificationValues.Center }),
new Run(new Text(((int)pik[i] / 100).ToString("F0") + "+" + (pik[i] % 100).ToString("F"))))),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run())),
new TableCell(new Paragraph(new Run()))
);
table.AppendChild(tr1);
}
}
}
catch
{
ed.WriteMessage("\nError");
}
//}
}
tr.Commit();
body.AppendChild(table);
body.AppendChild(
new SectionProperties(
new PageMargin()
{
Top = 1134,
Right = (UInt32Value)850U,
Bottom = 1134,
Left = (UInt32Value)1418U,
Header = (UInt32Value)708U,
Footer = (UInt32Value)708U,
Gutter = (UInt32Value)0U
}));
ed.WriteMessage("\nДокумент сохранен в D:\\intersections_rivers.docx");
}
catch
{
ed.WriteMessage("\nError.");
}
}
}
private void btnAlign_Click(object sender, EventArgs e)
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
using (EditorUserInteraction UI = ed.StartUserInteraction(this))
{
PromptEntityOptions opts = new PromptEntityOptions("\nSelect entity: ");
opts.AllowNone = false;
opts.SetRejectMessage("\nSelect a LINE, ARC or POLYLINE entity.");
opts.AddAllowedClass(typeof(Curve), false);
PromptEntityResult per = ed.GetEntity(opts);
if (per.Status == PromptStatus.OK)
{
Point3d pt = per.PickedPoint;
ObjectId id = per.ObjectId;
bool posUp = false;
Vector3d dir = new Vector3d(), up = new Vector3d(), normal = new Vector3d();
Database db = HostApplicationServices.WorkingDatabase;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
try
{
RebarPos pos = (RebarPos)tr.GetObject(m_Pos, OpenMode.ForRead);
Curve curve = (Curve)tr.GetObject(id, OpenMode.ForRead);
pt = curve.GetClosestPointTo(pt, curve.GetPlane().Normal, false);
dir = curve.GetFirstDerivative(pt);
dir = dir * pos.DirectionVector.Length / dir.Length;
normal = pos.NormalVector;
normal = normal * pos.DirectionVector.Length / normal.Length;
up = dir.CrossProduct(normal);
up = up * pos.DirectionVector.Length / up.Length;
posUp = (dir.DotProduct(pos.UpVector) > 0);
}
catch (System.Exception ex)
{
System.Windows.Forms.MessageBox.Show("Error: " + ex.Message, "RebarPos", System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Error);
}
}
double offset = 0.0;
double offset1 = -0.75, offset2 = 1.75;
if (posUp)
{
AlignPos(pt + offset1 * up, dir, up, normal);
offset = offset2;
}
else
{
AlignPos(pt + offset2 * up, dir, up, normal);
offset = offset1;
}
PromptKeywordOptions kopts = new PromptKeywordOptions("\nDiğer tarafa yerleştirilsin mi? [Evet/Hayır] <Hayir>: ", "Yes No");
kopts.AllowNone = true;
PromptResult kres = ed.GetKeywords(kopts);
if (kres.Status == PromptStatus.None || kres.StringResult == "Yes")
{
AlignPos(pt + offset * up, dir, up, normal);
ed.UpdateScreen();
}
}
}
}
private void GetLengthFromEntity(TextBox txt)
{
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
using (EditorUserInteraction UI = ed.StartUserInteraction(this))
{
PromptEntityOptions opts = new PromptEntityOptions("\nSelect entity: ");
opts.SetRejectMessage("\nSelect a LINE, ARC, TEXT, MTEXT, POLYLINE or DIMENSION entity.");
opts.AddAllowedClass(typeof(Line), false);
opts.AddAllowedClass(typeof(Arc), false);
opts.AddAllowedClass(typeof(DBText), false);
opts.AddAllowedClass(typeof(MText), false);
opts.AddAllowedClass(typeof(Dimension), false);
opts.AddAllowedClass(typeof(Polyline), false);
PromptEntityResult per = ed.GetEntity(opts);
if (per.Status == PromptStatus.OK)
{
ObjectId id = per.ObjectId;
Database db = HostApplicationServices.WorkingDatabase;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
try
{
DBObject obj = tr.GetObject(per.ObjectId, OpenMode.ForRead);
if (obj is Line)
{
Line dobj = obj as Line;
txt.Text = dobj.Length.ToString();
}
else if (obj is Arc)
{
Arc dobj = obj as Arc;
txt.Text = dobj.Length.ToString();
}
else if (obj is DBText)
{
DBText dobj = obj as DBText;
txt.Text = dobj.TextString;
}
else if (obj is MText)
{
MText dobj = obj as MText;
txt.Text = dobj.Text;
}
else if (obj is Dimension)
{
Dimension dobj = obj as Dimension;
txt.Text = dobj.Measurement.ToString();
}
else if (obj is Polyline)
{
Polyline dobj = obj as Polyline;
txt.Text = dobj.Length.ToString();
}
CheckPosLength(txt);
}
catch (System.Exception ex)
{
System.Windows.Forms.MessageBox.Show("Error: " + ex.Message, "RebarPos", System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Error);
}
}
}
}
}
public static String PromptSelectTINSurface(String sufraceStatus)
{
String surfName = "";
try
{
using (var tr = AcadApp.StartTransaction())
{
var opt = new PromptEntityOptions("\nВыберите " + sufraceStatus + " поверхность TIN: ");
opt.SetRejectMessage("\nОбъект должен быть поверхностью TIN.\n");
opt.AddAllowedClass(typeof(TinSurface), false);
var ent = AcadApp.AcaEd.GetEntity(opt);
if (ent.Status == PromptStatus.OK)
{
var tinsurfId = ent.ObjectId;
if (tinsurfId == ObjectId.Null)
{
return "";
}
var tinsurf = tinsurfId.GetObject(OpenMode.ForRead) as TinSurface;
surfName = tinsurf.Name;
return surfName; // All OK. Return surface name
} // If PromptStatus.OK
} // using
}
catch (Autodesk.AutoCAD.Runtime.Exception ex)
{
AcadApp.AcaEd.WriteMessage("ERROR: CivApp.PromptSelectTINSurface()\n" + ex + "\n");
}
return ""; //There have been some errors
}
public void DrawGroupLeader()
{
Editor ed = dwg.Editor;
PromptEntityOptions prmtEntityOpts = new PromptEntityOptions("Укажите линию");
prmtEntityOpts.AllowNone = false;
prmtEntityOpts.SetRejectMessage("Должна быть линия или полилиния!");
prmtEntityOpts.AddAllowedClass(typeof(Line), true);
prmtEntityOpts.AddAllowedClass(typeof(Polyline), true);
PromptEntityResult entRes = ed.GetEntity(prmtEntityOpts);
if (entRes.Status!= PromptStatus.OK)
{
return;
}
using (Transaction tr = CurrentDatabase.TransactionManager.StartTransaction())
{
GroupsInformation groupEntities = new GroupsInformation(tr, CurrentDatabase);
List<string> groupList = groupEntities.GetGroupsOfObject(entRes.ObjectId);
if (groupList == null)
{
ed.WriteMessage("За указанным объектом не значится никаких групп!");
return;
}
PromptPointOptions pointOpts = new PromptPointOptions("\nУкажите точку вставки блока: ");
PromptPointResult pointRes = ed.GetPoint(pointOpts);
if (pointRes.Status!= PromptStatus.OK)
{
return;
}
BlockTable bt = (BlockTable)CurrentDatabase.BlockTableId.GetObject(OpenMode.ForRead);
BlockTableRecord btrSpace = (BlockTableRecord)CurrentDatabase.CurrentSpaceId
.GetObject(OpenMode.ForWrite);
if (!bt.Has("group_vinoska"))
{
ed.WriteMessage("\nВ файле не определён блок выноски!!");
return;
}
BlockTableRecord gleaderBtr = (BlockTableRecord)bt["group_vinoska"].GetObject(OpenMode.ForRead);
BlockReference gleader = new BlockReference(pointRes.Value, gleaderBtr.ObjectId);
btrSpace.AppendEntity(gleader);
tr.AddNewlyCreatedDBObject(gleader, true);
//Если блок аннотативный - добавляем в таблицу аннотативных масштабов блока текущий масштаб
ObjectContextManager ocm = CurrentDatabase.ObjectContextManager;
ObjectContextCollection occ = ocm.GetContextCollection("ACDB_ANNOTATIONSCALES");
if (gleaderBtr.Annotative == AnnotativeStates.True)
{
ObjectContexts.AddContext(gleader, occ.CurrentContext);
}
gleader.SetDatabaseDefaults();
if (gleaderBtr.HasAttributeDefinitions)
{
var attDefs = gleaderBtr.Cast<ObjectId>()
.Where(n => n.ObjectClass.Name == "AcDbAttributeDefinition")
.Select(n => (AttributeDefinition)n.GetObject(OpenMode.ForRead));
foreach (AttributeDefinition attdef in attDefs)
{
AttributeReference attref = new AttributeReference();
attref.SetAttributeFromBlock(attdef, gleader.BlockTransform);
gleader.AttributeCollection.AppendAttribute(attref);
tr.AddNewlyCreatedDBObject(attref, true);
if (gleaderBtr.Annotative == AnnotativeStates.True)
{
ObjectContexts.AddContext(attref, occ.CurrentContext);
}
int attCount = int.Parse(attref.Tag.Remove(0,10));
if (attCount<=groupList.Count)
{
attref.TextString = groupList[attCount-1];
}
}
}
if (gleaderBtr.IsDynamicBlock)
{
DynamicBlockReferencePropertyCollection dynBRefColl = gleader.DynamicBlockReferencePropertyCollection;
foreach (DynamicBlockReferenceProperty prop in dynBRefColl)
{
if (prop.PropertyName == "Lookup1")
{
prop.Value = prop.GetAllowedValues()[groupList.Count-1];
}
}
}
tr.Commit();
}
}
public void ModifyTriangulate()
{
Triangulations triangulation = new Triangulations();
AC_Transactions tr = new AC_Transactions();
PromptEntityOptions options = new PromptEntityOptions("Pick a Line to modify Triangulations");
options.SetRejectMessage("not valid Object \n");
options.AddAllowedClass(typeof(Line), true);
PromptEntityResult sel = tr.AC_Doc.Editor.GetEntity(options);
if (sel.Status == PromptStatus.OK)
{
triangulation.Modify((AC_Line)tr.openObjectErased(sel.ObjectId));
}
}