/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
//string pattern = null;
//eidRead = "NULL";
frmMain.DisplayLog("已检测到按键，测试中...\r\n");
if (!readWriteIdHandle.CheckUart())
{
return(ret);
}
readWriteIdHandle.CheckModuleIsOk();
//do
//{
// frmMain.DisplayLog("正在发送...\r\n");
// //frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
// //frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
//} while (false);
//两种情况进入此处:1、超时跳出了do while,2、获取想要到 value
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
ret = 0;
return(ret);
}
/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
//string pattern = null;
//eidRead = "NULL";
//两种情况进入此处:1、超时跳出了do while,2、按了空格确认上电
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
do
{
frmMain.DisplayLog("测试中...\r\n");
CmdProcess cmdProcess = new CmdProcess(); //cmd类
tool = new ThirdPartyTool()
{
ToolDirectory = "Microsoft Azure Sphere SDK",
ToolName = "InitializeCommandPrompt",
Cmd = "azsphere device wifi show-status"
};
string strRet;
#region //获取OS版本
//strRet = cmdProcess.ExeCommand("", "azsphere device show-ota-status");//"azsphere device wifi show-status"
//if (strRet.Contains("error: Could not connect to the device."))
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//if (strRet.Contains("is not a valid value"))
//{
// frmMain.DisplayLog(string.Format("未claim设备 获取OS版本失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
#endregion
//对比模块MAC地址-标签MAC地址
strRet = cmdProcess.ExeCommand("", "azsphere device wifi show-status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//ret = DeviceCheck(tool, out strRet);
//if (ret!=0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
string mouduleMac = cmdProcess.GetValueByKeyword(strRet, "MAC Address");
if (mouduleMac != labelSn)
{
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比不一致 FAIL\r\n", mouduleMac, labelSn));
break;
}
frmMain.DisplayLog(string.Format("MAC检查：模块{0}，标签{1} 对比一致 PASS\r\n", mouduleMac, labelSn));
//检查是否有测试程序
//azsphere device sideload show-status
//azsphere device sideload delete
//azsphere device sideload deploy -p mt_app.img
//删除当前程序
frmMain.DisplayLog("当前程序删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("当前程序删除： 失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("当前程序删除：成功 PASS\r\n");
Thread.Sleep(500);
//Side load（加载测试固件）
frmMain.DisplayLog("测试固件加载中...\r\n");
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device sideload deploy -p ../app/{0}", TestAppName));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("加载测试固件：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("加载测试固件：成功 PASS\r\n", strRet));
string pinTestRetinfo;
//Socket复位
frmMain.DisplayLog("复位测试中...\r\n"); //成功 为有效信息
bool pinTestRet = PinTestBySocket("reset_tests", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n"); //失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("复位测试：失败 FAIL\r\n");//失败 为错误信息
break;
}
frmMain.DisplayLog("复位测试：合格 PASS\r\n");//成功 为有效信息
//Socket GPIO检查
frmMain.DisplayLog("GPIO测试中...\r\n");
pinTestRet = PinTestBySocket("get_gpios", out pinTestRetinfo);
frmMain.DisplayLog(pinTestRetinfo + "\r\n");//失败 为错误信息
if (!pinTestRet)
{
frmMain.DisplayLog("GPIO测试：测试失败 FAIL\r\n");//失败 为错误信息
break;
}
string errorStr;
bool gpioRet = GetGIPOResultBySocketRet(pinTestRetinfo, out errorStr);
//展示返回的GPIO数据
//strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
//frmMain.DisplayLog(strRet);
//GPIO结果显示
if (!gpioRet)
{
frmMain.DisplayLog("GPIO测试: 不合格 FAIL \r\n");
break;
}
frmMain.DisplayLog("GPIO测试：合格 PASS\r\n");//成功 为有效信息
#region 串口测试 复位和GPIO
////串口发送Reset System\r\n
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.Reset);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog(string.Format("复位命令未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
////if (!strRet.Contains("Get RST command"))
////{
//// frmMain.DisplayLog(string.Format("复位未得到回应 串口失败 FAIL\r\n详细：{0} \r\n", strRet));
//// break;
////}
////复位命令得到回应
//frmMain.DisplayLog(string.Format("复位中... \r\n"));
////跳出循环说明复位成功
//readWriteIdHandle.ReadRestInfo("init completed");
//frmMain.DisplayLog(string.Format("复位成功 PASS\r\n"));
////GPIO测试
////串口发送Reset System\r\n
//Thread.Sleep(1000);
//strRet = readWriteIdHandle.Read(ATReadCmd.ReadIdType.GPIOTest);
//if (string.IsNullOrEmpty(strRet))
//{
// frmMain.DisplayLog("GPIO测试命令未得到回应 串口失败 FAIL\r\n");
// break;
//}
////GPIO测试命令得到回应
////frmMain.DisplayLog("GPIO测试中... \r\n");
////string errorInfo;
////bool gpioRet = checkGIPOResult(strRet, out errorInfo);
//////展示返回的GPIO数据
////strRet = strRet.Replace("P", "PASS").Replace("F", "FAIL") + "\r\n";
////frmMain.DisplayLog(strRet);
//////GPIO结果显示
////if (!gpioRet)
////{
//// frmMain.DisplayLog(string.Format("GPIO测试:失败 FAIL \r\n详细：{0}\r\n", errorInfo));
//// break;
////}
////frmMain.DisplayLog("GPIO测试：成功 PASS\r\n");
#endregion
//删除APPtest
frmMain.DisplayLog("测试固件删除中...\r\n");
strRet = cmdProcess.ExeCommand("", "azsphere device sideload delete");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
//tool.Cmd = "azsphere device sideload deploy -p mt_app.img";
//ret = DeviceCheck(tool, out strRet);
//if (ret != 0)
//{
// frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("测试固件删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("测试固件删除：成功 PASS\r\n");
frmMain.DisplayLog("Wifi列表网络检查中...\r\n");
//检查网络 wifi表
strRet = cmdProcess.ExeCommand("", "azsphere device wifi list");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("No networks found") && strRet.Contains("ID"))
{
//Get ID
string[] wifiIdList = cmdProcess.GetListByKeyword(strRet, "ID").ToArray();
foreach (var item in wifiIdList)
{
frmMain.DisplayLog("WIFI列表检查：含有WIFI列表ID,删除中...\r\n");
//不为空
if (!string.IsNullOrEmpty(item))
{
//删除ID
strRet = cmdProcess.ExeCommand("", string.Format("azsphere device wifi delete –i {0}", item));//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
//不包含成功信息且不包含
if (!strRet.Contains("Successfully removed network") && !strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("WIFI列表ID删除：失败 FAIL\r\n详细：{0} \r\n", strRet));
return(ret);
}
}
}
}
frmMain.DisplayLog("WIFI列表检查：PASS\r\n");
//性能测试
frmMain.DisplayLog("capabilties测试中...\r\n");
Capability:
strRet = cmdProcess.ExeCommand("", "azsphere device capability show-attached");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
if (!strRet.Contains("Command completed successfully"))
{
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
List <string> capabilitiesList = cmdProcess.GetListCapabilitiesKeyword(strRet, "Enable");
if (capabilitiesList.Count > 0)
{
//manufacture set complete status，只能设置一次，设置后就不能够RF测试和校准了，测试阶段不要轻易尝试。
#region
if (IsManufactureComplete == 1)
{
strRet = cmdProcess.ExeCommand("", "manufacture set complete status");//"azsphere device wifi show-status"
if (strRet.Contains("error: Could not connect to the device."))
{
frmMain.DisplayLog(string.Format("未上电连接上设备，请检查连接或驱动 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog(string.Format("已设置制作完成状态，继续测试capabilties中... \r\n详细：{0} \r\n", strRet));
goto Capability;
}
#endregion
frmMain.DisplayLog(string.Format("capabilties测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
break;
}
frmMain.DisplayLog("capabilties测试：PASS\r\n");
//E-fuse测试
tool = new ThirdPartyTool()
{
ToolDirectory = "RFToolCli",
Cmd = string.Format("RfSettingsTool check --expected ../bin/{0}", EfuseBin)
};
//strRet = cmdProcess.ExeCommand(tool);//"azsphere device wifi show-status"
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//python
//tool.Cmd = "python RunHeaderTest.py ";//reset_system
//tool.ToolDirectory = "PC";
//strRet = cmdProcess.ExeCommand(tool, "");
//if (strRet.Contains("error"))
//{
// frmMain.DisplayLog(string.Format("E-fuse测试：失败 FAIL\r\n详细：{0} \r\n", strRet));
// break;
//}
//E-fuse具体测试内容
frmMain.DisplayLog("e-fuse测试中...\r\n");
strRet = cmdProcess.ExeCommand(tool, "");
string hasReadFlag = "Comparing configurations.";
string startFlag = "Reading configuration data from device.";
string erroInfo = StringHelp.SubCentre(strRet, startFlag, "\r\n\r\n");
if (!strRet.Contains(hasReadFlag))
{
frmMain.DisplayLog(string.Format("E-fuse测试：命令失败 \r\n详细：{0} \r\n", erroInfo));
break;
}
strRet = StringHelp.SubCentre(strRet, hasReadFlag, "\r\n\r\n");
frmMain.DisplayLog(strRet + "\r\n");
if (strRet.Contains("ERROR") || strRet.Contains("异常"))
{
frmMain.DisplayLog("E-fuse测试结果： FAIL \r\n");
break;
}
frmMain.DisplayLog("E-fuse测试：PASS\r\n");
ret = 0;
//cd RFToolCli
//List<string> listValue = readWriteIdHandle.ReadId();
//if (listValue.Count <= 3)
//{
// break;
//}
////多组：1,1,01,01,,,40,0*61
//int sum = 0;
//string[] arryData;
//try
//{
// foreach (string strData in listValue)
// {
// arryData = strData.Split(',');
// 应滤除其他可视卫星
// int cn0Value = int.Parse(arryData[6]);
// sum += cn0Value;
// }
//}
//catch (Exception ex)
//{
// frmMain.DisplayLog(string.Format("数据解析错误：{0}\r\n", ex.Message));
// break;
//}
//int argVale = sum / listValue.Count;
//frmMain.DisplayLog(string.Format("获取C/N0值：{0}\r\n", argVale));
//if (argVale < StandardCN01)
//{
// frmMain.DisplayLog(string.Format("C/N0值：{0},小于设定范围{1} FAIL\r\n", argVale, StandardCN01));
// break;
//}
//frmMain.DisplayLog(string.Format("C/N0值：{0}，大于设定范围{1} PASS\r\n", argVale,StandardCN01));
//ret = 0;
////从芯片获取eid
////eidRead = "081603FFFFF35293" + eidlast.ToString("X").PadLeft(4,'0');
//eidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.EidRead);
//pattern = @"[0-9A-Z]{20}";
//if (string.IsNullOrEmpty(eidRead) || !Regex.IsMatch(eidRead, pattern))
//{
// frmMain.DisplayLog("EID读取失败\r\n");
// break;
//}
//frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
//frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
} while (false);
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
return(ret);
}
/// <summary>
/// 任务流
/// </summary>
/// <returns></returns>
private int TestTaskFlow()
{
int ret = -1;
string pattern = null;
eidRead = "NULL";
if (readWriteIdHandle.IsTimeOut)
{
frmMain.DisplayLog("测试超时\r\n");
return(ret);
}
ProductionInfo.SystemType systemType = ProductionInfo.Type;
//使用do..while(false)的原因，是为了当测试流程为fail时，使用break跳出该结构，仍然执行结果上报
do
{
//从芯片获取eid
//eidRead = "081603FFFFF35293" + eidlast.ToString("X").PadLeft(4,'0');
//int readRet = 1;
eidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.EidRead);
pattern = @"[0-9A-Z]{20}";
if (string.IsNullOrEmpty(eidRead) || !Regex.IsMatch(eidRead, pattern))
{
frmMain.DisplayLog("EID读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块EID：{0}\r\n", eidRead));
frmMain.SetText(AllForms.EnumControlWidget.txtEid.ToString(), eidRead, false);
//从芯片读出SN
snRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.SnRead);
pattern = @"^[0-9A-Z]{16}$";
if (string.IsNullOrEmpty(snRead))
{
frmMain.DisplayLog("SN为空读取失败\r\n");
break;
}
if (!Regex.IsMatch(snRead, pattern))
{
frmMain.DisplayLog("SN合法性检查:SN不合法败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块合法SN：{0}\r\n", snRead));
frmMain.SetText(AllForms.EnumControlWidget.txtSn.ToString(), snRead, false);
//从芯片读出IMEI
imeiRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.ImeiRead);
pattern = @"\d{15}";
if (string.IsNullOrEmpty(imeiRead) || !Regex.IsMatch(imeiRead, pattern))
{
frmMain.DisplayLog("IMEI读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块IMEI：{0}\r\n", imeiRead));
frmMain.SetText(AllForms.EnumControlWidget.txtImei.ToString(), imeiRead, false);
//从芯片获取iccid
iccidRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.IccidRead);
pattern = @"[0-9A-Z]{20}";
if (string.IsNullOrEmpty(iccidRead) || !Regex.IsMatch(iccidRead, pattern))
{
frmMain.DisplayLog("ICCID读取失败\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取模块ICCID：{0}\r\n", iccidRead));
frmMain.SetText(AllForms.EnumControlWidget.txtIccid.ToString(), iccidRead, false);
//从芯片获取Verson
versonRead = readWriteIdHandle.ReadId(ATReadCmd.ReadIdType.VersonRead);
if (string.IsNullOrEmpty(iccidRead))
{
frmMain.DisplayLog("版本号读取失败 FAIL\r\n");
break;
}
frmMain.DisplayLog(string.Format("已获取版本号：{0}\r\n", versonRead));
if (versonRead != VersonIni.ToUpper())
{
frmMain.DisplayLog(string.Format("读出的版本号:{0} 与 配置的版本号:{1} 不一致 FAIL\r\n", versonRead, VersonIni));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("读出的版本号:{0} 与 配置的版本号:{1} 一致 PASS\r\n", versonRead, VersonIni));
}
//判断IMEI与标签IMEI是否一致
if (labelImei == imeiRead)
{
frmMain.DisplayLog(string.Format("标签IMEI：{0}与模块IMEI：{1}对比一致 PASS\r\n", labelImei, imeiRead));
}
else
{
frmMain.DisplayLog(string.Format("标签IMEI：{0}与模块IMEI：{1}对比不一致 FAIL\r\n", labelImei, imeiRead));
break;
}
//eid与iccid的后6位对比
if (CompareEidIccid == 1)//要对比
{
string lastSixIccid = iccidRead.Substring(iccidRead.Length - 6);
string lastSixEid = eidRead.Substring(eidRead.Length - 6);
if (JudgeStandard == 0)
{
//一样 FAIL
if (lastSixIccid == lastSixEid)
{
frmMain.DisplayLog(string.Format("空中写号检查：未做。详细：后6位的eid:{0} 与 iccid:{1} 完全一致 FAIL\r\n", lastSixEid, lastSixIccid));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("空中写号检查：通过。详细：后6位的eid:{0} 与 iccid:{1}不一致 PASS\r\n", lastSixEid, lastSixIccid));
}
}
else if (JudgeStandard == 1)
{
//一样 PASS
if (lastSixIccid != lastSixEid)
{
frmMain.DisplayLog(string.Format("空中写号检查：未做。详细：后6位的eid:{0} 与 iccid:{1} 不一致 FAIL\r\n", lastSixEid, lastSixIccid));
break;
//ret = -1;
//return ret;
}
else
{
frmMain.DisplayLog(string.Format("空中写号检查：通过。详细：后6位的eid:{0} 与 iccid:{1}完全一致 PASS\r\n", lastSixEid, lastSixIccid));
}
}
}
//离线查重IMEI
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
ret = excel.SearchImei(imeiRead);
if (ret != 0)
{
frmMain.DisplayLog(string.Format("IMEI查重: {0} 重复 FAIL\r\n", imeiRead));
return(ret);
}
else
{
frmMain.DisplayLog(string.Format("IMEI查重: {0} 本机查重 PASS\r\n", imeiRead));
}
}
#region
if (systemType == ProductionInfo.SystemType.iMES)
{
//调用打印接口下拉eid相关信息rep，为了生成Log作准备
Production.Server.NewHttpImeiPrint.ResponseInfo rep;
string errorInfo;
ret = ToImesInterface.ImeiPrint(out rep, imeiRead, out errorInfo);
//ImeiPrint(out rep);
if (ret != 0)
{
//显示结果：下拉失败,并改变颜色
frmMain.DisplayLog("从IMES下拉信息失败" + errorInfo + "\r\n");
break;
}
frmMain.DisplayLog("从IMES下拉信息成功\r\n");
//模组读出的和IMES下拉的是否相同
//IMEI,PUBLICSN,ICCID,IMSI,EID,IMEIBINDINGSN,DATE
//"sn":123456789012345,AI18082202000001,,,,,8822
string[] idNumber = rep.sn.ToUpper().Split(',');
#region 比对
#region IMEI
if (idNumber[0] == "")
{
frmMain.DisplayLog(string.Format("服务器IMEI获取为空 FAIL\r\n"));
ret = -1;
break;
}
if (idNumber[0] != imeiRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器IMEI:{0} 与 模块IMEI:{1} 不一致 FAIL\r\n", idNumber[0], imeiRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器IMEI:{0} 与 模块IMEI:{1} 一致 PASS\r\n", idNumber[0], imeiRead));
}
#endregion
#region SN
if (idNumber[1] != snRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器SN:{0} 与 模块SN:{1} 不一致 FAIL\r\n", idNumber[1], snRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器SN:{0} 与 模块SN:{1} 一致 PASS\r\n", idNumber[1], snRead));
}
#endregion
#region ICCID
if (idNumber[2] != iccidRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器ICCID:{0} 与 模块ICCID:{1} 不一致 FAIL\r\n", idNumber[2], iccidRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器ICCID:{0} 与 模块ICCID:{1} 一致 PASS\r\n", idNumber[2], iccidRead));
}
#endregion
#region EID
if (idNumber[4] != eidRead.ToUpper())
{
frmMain.DisplayLog(string.Format("服务器EID:{0} 与 模块EID:{1} 不一致 FAIL\r\n", idNumber[4], eidRead));
ret = -1;
break;
}
else
{
frmMain.DisplayLog(string.Format("服务器EID:{0} 与 模块EID:{1} 一致 PASS\r\n", idNumber[4], eidRead));
}
#endregion
#endregion
}
if (systemType == ProductionInfo.SystemType.GSMMES)
{
//EID合法性检查
ret = EidVerify();
if (ret != 0)
{
break;
}
}
#endregion
if (systemType == ProductionInfo.SystemType.GSMMES)
{
//EID合法性检查
ret = CheckAllNumber();
if (ret != 0)//失败就直接上报测试结果
{
break;
}
}
} while (false);
if (systemType == ProductionInfo.SystemType.GSMMES)
{
frmMain.DisplayLog("测试数据上报服务器\r\n");
//EID/IMEI/SN上报服务器
int resultUpload = ret == 0 ? 1 : 2;
string testDada = string.Empty;
string log = frmMain.ReadLog();
ret = EidUpload(resultUpload, log);
if (ret != 0)
{
frmMain.DisplayLog("过站失败\r\n");
return(ret);
}
}
#region 离线 记录到Excel
if (ProductionInfo.Type == ProductionInfo.SystemType.Offline)
{
if (ret == 0)
{
JiaHao.ExcelHelp.ExcelHelper excel = JiaHao.ExcelHelp.ExcelHelper.GetExcelHelperInstance();
excel.ExportExcelOneByOne(new JiaHao.ExcelHelp.ExcelHelper.TrayInfoInExcel()
{
num = 1,
sn = snRead,
imei = imeiRead,
eid = eidRead,
iccid = iccidRead,
cuatomerName = "中移物联"
});
frmMain.DisplayLog("写入Excel成功\r\n");
}
}
#endregion
return(ret);
}
