/// <summary>
/// This tool builds the additional vertex stream for each primitive that will attach the best probe ID (as a U16)
/// to a vertex so the vertex shader has a single entry point into the probes network
/// Most face indices have already been rendered in the probe cube map and the batch processing tool took care of
/// selecting the most important probe for these faces, but some faces don't have probe information.
/// Maybe they have been occluded by other faces (shadowing) or are too small to be rendered in the cube map.
/// For these special faces, we need to propagate probe IDs from valid faces until the entire mesh is filled with
/// valid probe IDs.
///
/// We proceed primitive per primitive since they are all disconnected so no propagation would be possible cross
/// primitives unless we could reconnect split vertices, but I don't want to do that. Maybe it will become necessary
/// at some point but for the moment I don't care.
/// Some primitives may lack probe ID completely (!!), for these I choose to assign the ID of the nearest probe, which
/// may be a bit dangerous, especially if we're dealing with probes that are standing right behind the primitive for example.
/// In that case, perhaps using a scoring scheme that depends on both distance and orientation would be better? Let's see that when the problem arises...
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void encodeFaceProbesToolStripMenuItem_Click( object sender, EventArgs e )
{
// Ask for the influence file to load from
string OldFileName = GetRegKey( "LastProbeInfluenceFileName", GetRegKey( "LastProbesFolderTarget", Path.GetDirectoryName( m_ApplicationPath ) ) );
openFileDialogProbeInfluence.InitialDirectory = Path.GetDirectoryName( OldFileName );
openFileDialogProbeInfluence.FileName = Path.GetFileName( OldFileName );
if ( openFileDialogProbeInfluence.ShowDialog( this ) != DialogResult.OK )
return;
SetRegKey( "LastProbeInfluenceFileName", openFileDialogProbeInfluence.FileName );
FileInfo SourceInfluenceFile = new FileInfo( openFileDialogProbeInfluence.FileName );
// Ask for the scene file to apply to
string OldSceneFile = GetRegKey( "LastSceneFileName", GetRegKey( "LastProbesFolderSource", Path.GetDirectoryName( m_ApplicationPath ) ) );
openFileDialogScene.InitialDirectory = Path.GetDirectoryName( OldSceneFile );
openFileDialogScene.FileName = Path.GetFileName( OldSceneFile );
if ( openFileDialogScene.ShowDialog( this ) != DialogResult.OK )
return;
SetRegKey( "LastSceneFileName", openFileDialogScene.FileName );
FileInfo SceneFile = new FileInfo( openFileDialogScene.FileName );
try
{
// Read the scene file
GCXFormat.Scene GCX = null;
using ( FileStream S = SceneFile.OpenRead() )
using( BinaryReader R = new BinaryReader( S ) )
GCX = new GCXFormat.Scene( R );
// Read the probe influences
ProbeInfluence[] FaceInfluences = new ProbeInfluence[GCX.m_TotalFacesCount];
using ( FileStream S = SourceInfluenceFile.OpenRead() )
using( BinaryReader R = new BinaryReader( S ) )
{
int SizeofProbeInfluence = System.Runtime.InteropServices.Marshal.SizeOf(typeof(UInt32)) + System.Runtime.InteropServices.Marshal.SizeOf(typeof(double));
int FacesCount = (int) S.Length / SizeofProbeInfluence;
if ( (S.Length % SizeofProbeInfluence) != 0 )
throw new Exception( "Probe influence file is larger than an integer number of ProbeInfluence structures!" );
for ( int FaceIndex=0; FaceIndex < FacesCount; FaceIndex++ )
{
UInt32 ProbeID = R.ReadUInt32();
double Importance = R.ReadDouble();
FaceInfluences[FaceIndex] = new ProbeInfluence() { ProbeID = ProbeID, Importance = Importance };
}
for ( int FaceIndex=FacesCount; FaceIndex < GCX.m_TotalFacesCount; FaceIndex++ )
FaceInfluences[FaceIndex] = new ProbeInfluence() { ProbeID = ProbeInfluence.INVALID_PROBEID, Importance = 0.0 };
}
UInt32[] VertexStreamProbeID = new UInt32[GCX.m_TotalVerticesCount]; // The final vertex stream we're building
// Establish data for progress measurement
int PrimitivesCount = 0;
foreach ( GCXFormat.Scene.Node N in GCX.m_Nodes )
{
GCXFormat.Scene.Mesh M = N as GCXFormat.Scene.Mesh;
if ( M != null )
PrimitivesCount += M.m_Primitives.Length;
}
//////////////////////////////////////////////////////////////////////////
// The algorithm is quite simple:
// For each primitive
// Create a winged edge structure for each face
// Assign known probe influence to each face
// Build a list of faces without probe influence
//
// While list is not empty and its size keeps decreasing
// For each face without influence
// If neighbor faces have influence information
// Copy best influence from neighbor
// Remove face from the list
//
// If list is not empty // We have a bunch of disconnected faces that can't see any probe
// For each face of the list
// Assign [NO PROBE|NEAREST PROBE|WORLD PROBE] ? (not clear yet which is best)
//
// Redistribute best probe's ID to each face vertex
//
// Save stream of vertex probe IDs to be merged into an additional vertex buffer stream at runtime
//
int MeshIndex = 0;
int PrimitiveIndex = 0;
int FacesWithoutProbeCount = 0;
int PrimitivesWithoutProbeCount = 0;
string Errors = "";
progressBarBatchConvert.Value = 0;
progressBarBatchConvert.Visible = true;
progressBarSubTask.Value = 0;
progressBarSubTask.Visible = true;
foreach ( GCXFormat.Scene.Node N in GCX.m_Nodes )
{
GCXFormat.Scene.Mesh M = N as GCXFormat.Scene.Mesh;
if ( M == null )
continue;
foreach ( GCXFormat.Scene.Mesh.Primitive P in M.m_Primitives )
{
int FacesCount = P.m_Faces.Length;
try
{
P.BuildWingedEdgesMesh();
}
catch ( Exception _e )
{
Errors += "Primitive #" + PrimitiveIndex + " of mesh #" + MeshIndex + " has generated an error on Winged Mesh generation: " + _e.Message + "\r\n";
// Add this primitve to the list of the ones m
PrimitivesWithoutProbeCount++;
FacesWithoutProbeCount += P.m_Vertices.Length;
continue;
}
// Update progress
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum * (++PrimitiveIndex) / PrimitivesCount;
progressBarSubTask.Value = 0;
// Tag winged edge faces with probe influence & list faces without valid probe ID
List<GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle> MissingProbeIDFaces = new List<GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle>( FacesCount );
for ( int FaceIndex=0; FaceIndex < FacesCount; FaceIndex++ )
{
ProbeInfluence Influence = FaceInfluences[P.m_FaceOffset+FaceIndex];
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle Face = P.m_WingedEdgeFaces[FaceIndex];
Face.m_Tag = Influence;
if ( Influence.ProbeID == ProbeInfluence.INVALID_PROBEID )
MissingProbeIDFaces.Add( Face );
}
// Propagate probe influence
int OriginalCount = MissingProbeIDFaces.Count;
int LastListSize = MissingProbeIDFaces.Count+1;
while ( MissingProbeIDFaces.Count > 0 && MissingProbeIDFaces.Count < LastListSize )
{
LastListSize = MissingProbeIDFaces.Count; // Keep track of list's size so we know if anything moved
for ( int FaceIndex=MissingProbeIDFaces.Count-1; FaceIndex >= 0; FaceIndex-- ) // Browse backward so we can safely remove elements from the list
{
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle Face = MissingProbeIDFaces[FaceIndex];
// Examine neighbors' probe influence and propagate best probe
ProbeInfluence BestProbe = null;
for ( int EdgeIndex=0; EdgeIndex < 3; EdgeIndex++ )
{
int NeighborFaceIndex = Face.m_Edges[EdgeIndex].GetOtherFaceIndex( Face.m_Index );
if ( NeighborFaceIndex != -1 )
{
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle NeighborFace = P.m_WingedEdgeFaces[NeighborFaceIndex];
ProbeInfluence NeighborProbe = NeighborFace.m_Tag as ProbeInfluence;
if ( NeighborProbe.ProbeID != ProbeInfluence.INVALID_PROBEID && (BestProbe == null || NeighborProbe.Importance > BestProbe.Importance) )
BestProbe = NeighborProbe; // Found a better probe for that face!
}
}
if ( BestProbe == null )
continue; // Still no valid probe found...
Face.m_Tag = BestProbe; // Share the probe, don't care...
MissingProbeIDFaces.RemoveAt( FaceIndex ); // We can safely remove the face by index since we're browsing the list backward
}
// Update progress
progressBarSubTask.Value = progressBarSubTask.Maximum * (OriginalCount - MissingProbeIDFaces.Count) / OriginalCount;
progressBarSubTask.Refresh();
}
// At this point, either the list of faces missing probe IDs is empty in which case the job is done
// or we need to assign an arbitrary probe ID to those faces
if ( MissingProbeIDFaces.Count > 0 )
{
FacesWithoutProbeCount += MissingProbeIDFaces.Count;
PrimitivesWithoutProbeCount++;
// TODO: Assign nearest probe or something!
}
// Now that we have valid probe IDs for each face, propagate best probe influence to each vertex
ProbeInfluence[] BestProbePerVertex = new ProbeInfluence[P.m_Vertices.Length];
for ( int FaceIndex=0; FaceIndex < FacesCount; FaceIndex++ )
{
GCXFormat.Scene.Mesh.Primitive.Face Face = P.m_Faces[FaceIndex];
ProbeInfluence FaceProbe = P.m_WingedEdgeFaces[FaceIndex].m_Tag as ProbeInfluence;
if ( BestProbePerVertex[Face.V0] == null || BestProbePerVertex[Face.V0].Importance < FaceProbe.Importance ) BestProbePerVertex[Face.V0] = FaceProbe; // Better probe for that vertex
if ( BestProbePerVertex[Face.V1] == null || BestProbePerVertex[Face.V1].Importance < FaceProbe.Importance ) BestProbePerVertex[Face.V1] = FaceProbe; // Better probe for that vertex
if ( BestProbePerVertex[Face.V2] == null || BestProbePerVertex[Face.V2].Importance < FaceProbe.Importance ) BestProbePerVertex[Face.V2] = FaceProbe; // Better probe for that vertex
}
// Finally, we can splat probe IDs into the giant vertex stream
for ( int VertexIndex=0; VertexIndex < P.m_Vertices.Length; VertexIndex++ )
VertexStreamProbeID[P.m_VertexOffset+VertexIndex] = (UInt32) (BestProbePerVertex[VertexIndex] != null ? BestProbePerVertex[VertexIndex].ProbeID : 0xFFFFFFFF); // TODO <= warn if we still have invalid vertices!
}
MeshIndex++;
}
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum;
//////////////////////////////////////////////////////////////////////////
// Save the final vertex stream to disk
FileInfo TargetVertexStreamFile = new FileInfo( Path.Combine( Path.GetDirectoryName( SceneFile.FullName ), Path.GetFileNameWithoutExtension( SceneFile.FullName ) + "_ProbeID.vertexStream.U16" ) );
using ( FileStream S = TargetVertexStreamFile.Create() )
using( BinaryWriter W = new BinaryWriter( S ) )
{
for ( int VertexIndex=0; VertexIndex < VertexStreamProbeID.Length; VertexIndex++ )
W.Write( VertexStreamProbeID[VertexIndex] );
}
// Notify
MessageBoxIcon Icon = MessageBoxIcon.Information;
string Info = "Success!\r\n";
Info += "Processed " + PrimitivesCount + " primitives for a total of " + GCX.m_TotalFacesCount + " faces and " + GCX.m_TotalVerticesCount + " vertices.\r\n";
if ( PrimitivesWithoutProbeCount > 0 )
{
Icon = MessageBoxIcon.Warning;
Info += "\r\n---------------------- WARNING ----------------------\r\n";
Info += PrimitivesWithoutProbeCount + " primitives are missing or have incomplete probe information.\r\n";
Info += "A total of " + FacesWithoutProbeCount + " faces don't have probe information!\r\n";
}
if ( Errors != "" )
{
Icon = MessageBoxIcon.Warning;
Info += "\r\n---------------------- ERRORS ----------------------\r\n";
Info += Errors;
}
MessageBox( Info, MessageBoxButtons.OK, Icon );
}
catch ( Exception _e )
{
MessageBox( "An error occurred while probe influences in scene file: " + _e.Message, MessageBoxButtons.OK, MessageBoxIcon.Error );
return;
}
finally
{
progressBarBatchConvert.Visible = false;
progressBarSubTask.Visible = false;
}
}
/// <summary>
/// This tool builds the additional vertex stream for each primitive that will attach the best probe ID (as a U16)
/// to a vertex so the vertex shader has a single entry point into the probes network
/// Most face indices have already been rendered in the probe cube map and the batch processing tool took care of
/// selecting the most important probe for these faces, but some faces don't have probe information.
/// Maybe they have been occluded by other faces (shadowing) or are too small to be rendered in the cube map.
/// For these special faces, we need to propagate probe IDs from valid faces until the entire mesh is filled with
/// valid probe IDs.
///
/// We proceed primitive per primitive since they are all disconnected so no propagation would be possible cross
/// primitives unless we could reconnect split vertices, but I don't want to do that. Maybe it will become necessary
/// at some point but for the moment I don't care.
/// Some primitives may lack probe ID completely (!!), for these I choose to assign the ID of the nearest probe, which
/// may be a bit dangerous, especially if we're dealing with probes that are standing right behind the primitive for example.
/// In that case, perhaps using a scoring scheme that depends on both distance and orientation would be better? Let's see that when the problem arises...
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
private void encodeFaceProbesToolStripMenuItem_Click(object sender, EventArgs e)
{
// Ask for the influence file to load from
string OldFileName = GetRegKey("LastProbeInfluenceFileName", GetRegKey("LastProbesFolderTarget", Path.GetDirectoryName(m_ApplicationPath)));
openFileDialogProbeInfluence.InitialDirectory = Path.GetDirectoryName(OldFileName);
openFileDialogProbeInfluence.FileName = Path.GetFileName(OldFileName);
if (openFileDialogProbeInfluence.ShowDialog(this) != DialogResult.OK)
{
return;
}
SetRegKey("LastProbeInfluenceFileName", openFileDialogProbeInfluence.FileName);
FileInfo SourceInfluenceFile = new FileInfo(openFileDialogProbeInfluence.FileName);
// Ask for the scene file to apply to
string OldSceneFile = GetRegKey("LastSceneFileName", GetRegKey("LastProbesFolderSource", Path.GetDirectoryName(m_ApplicationPath)));
openFileDialogScene.InitialDirectory = Path.GetDirectoryName(OldSceneFile);
openFileDialogScene.FileName = Path.GetFileName(OldSceneFile);
if (openFileDialogScene.ShowDialog(this) != DialogResult.OK)
{
return;
}
SetRegKey("LastSceneFileName", openFileDialogScene.FileName);
FileInfo SceneFile = new FileInfo(openFileDialogScene.FileName);
try
{
// Read the scene file
GCXFormat.Scene GCX = null;
using (FileStream S = SceneFile.OpenRead())
using (BinaryReader R = new BinaryReader(S))
GCX = new GCXFormat.Scene(R);
// Read the probe influences
ProbeInfluence[] FaceInfluences = new ProbeInfluence[GCX.m_TotalFacesCount];
using (FileStream S = SourceInfluenceFile.OpenRead())
using (BinaryReader R = new BinaryReader(S))
{
int SizeofProbeInfluence = System.Runtime.InteropServices.Marshal.SizeOf(typeof(UInt32)) + System.Runtime.InteropServices.Marshal.SizeOf(typeof(double));
int FacesCount = (int)S.Length / SizeofProbeInfluence;
if ((S.Length % SizeofProbeInfluence) != 0)
{
throw new Exception("Probe influence file is larger than an integer number of ProbeInfluence structures!");
}
for (int FaceIndex = 0; FaceIndex < FacesCount; FaceIndex++)
{
UInt32 ProbeID = R.ReadUInt32();
double Importance = R.ReadDouble();
FaceInfluences[FaceIndex] = new ProbeInfluence()
{
ProbeID = ProbeID, Importance = Importance
};
}
for (int FaceIndex = FacesCount; FaceIndex < GCX.m_TotalFacesCount; FaceIndex++)
{
FaceInfluences[FaceIndex] = new ProbeInfluence()
{
ProbeID = ProbeInfluence.INVALID_PROBEID, Importance = 0.0
}
}
;
}
UInt32[] VertexStreamProbeID = new UInt32[GCX.m_TotalVerticesCount]; // The final vertex stream we're building
// Establish data for progress measurement
int PrimitivesCount = 0;
foreach (GCXFormat.Scene.Node N in GCX.m_Nodes)
{
GCXFormat.Scene.Mesh M = N as GCXFormat.Scene.Mesh;
if (M != null)
{
PrimitivesCount += M.m_Primitives.Length;
}
}
//////////////////////////////////////////////////////////////////////////
// The algorithm is quite simple:
// For each primitive
// Create a winged edge structure for each face
// Assign known probe influence to each face
// Build a list of faces without probe influence
//
// While list is not empty and its size keeps decreasing
// For each face without influence
// If neighbor faces have influence information
// Copy best influence from neighbor
// Remove face from the list
//
// If list is not empty // We have a bunch of disconnected faces that can't see any probe
// For each face of the list
// Assign [NO PROBE|NEAREST PROBE|WORLD PROBE] ? (not clear yet which is best)
//
// Redistribute best probe's ID to each face vertex
//
// Save stream of vertex probe IDs to be merged into an additional vertex buffer stream at runtime
//
int MeshIndex = 0;
int PrimitiveIndex = 0;
int FacesWithoutProbeCount = 0;
int PrimitivesWithoutProbeCount = 0;
string Errors = "";
progressBarBatchConvert.Value = 0;
progressBarBatchConvert.Visible = true;
progressBarSubTask.Value = 0;
progressBarSubTask.Visible = true;
foreach (GCXFormat.Scene.Node N in GCX.m_Nodes)
{
GCXFormat.Scene.Mesh M = N as GCXFormat.Scene.Mesh;
if (M == null)
{
continue;
}
foreach (GCXFormat.Scene.Mesh.Primitive P in M.m_Primitives)
{
int FacesCount = P.m_Faces.Length;
try
{
P.BuildWingedEdgesMesh();
}
catch (Exception _e)
{
Errors += "Primitive #" + PrimitiveIndex + " of mesh #" + MeshIndex + " has generated an error on Winged Mesh generation: " + _e.Message + "\r\n";
// Add this primitve to the list of the ones m
PrimitivesWithoutProbeCount++;
FacesWithoutProbeCount += P.m_Vertices.Length;
continue;
}
// Update progress
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum * (++PrimitiveIndex) / PrimitivesCount;
progressBarSubTask.Value = 0;
// Tag winged edge faces with probe influence & list faces without valid probe ID
List <GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle> MissingProbeIDFaces = new List <GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle>(FacesCount);
for (int FaceIndex = 0; FaceIndex < FacesCount; FaceIndex++)
{
ProbeInfluence Influence = FaceInfluences[P.m_FaceOffset + FaceIndex];
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle Face = P.m_WingedEdgeFaces[FaceIndex];
Face.m_Tag = Influence;
if (Influence.ProbeID == ProbeInfluence.INVALID_PROBEID)
{
MissingProbeIDFaces.Add(Face);
}
}
// Propagate probe influence
int OriginalCount = MissingProbeIDFaces.Count;
int LastListSize = MissingProbeIDFaces.Count + 1;
while (MissingProbeIDFaces.Count > 0 && MissingProbeIDFaces.Count < LastListSize)
{
LastListSize = MissingProbeIDFaces.Count; // Keep track of list's size so we know if anything moved
for (int FaceIndex = MissingProbeIDFaces.Count - 1; FaceIndex >= 0; FaceIndex--) // Browse backward so we can safely remove elements from the list
{
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle Face = MissingProbeIDFaces[FaceIndex];
// Examine neighbors' probe influence and propagate best probe
ProbeInfluence BestProbe = null;
for (int EdgeIndex = 0; EdgeIndex < 3; EdgeIndex++)
{
int NeighborFaceIndex = Face.m_Edges[EdgeIndex].GetOtherFaceIndex(Face.m_Index);
if (NeighborFaceIndex != -1)
{
GCXFormat.Scene.Mesh.Primitive.WingedEdgeTriangle NeighborFace = P.m_WingedEdgeFaces[NeighborFaceIndex];
ProbeInfluence NeighborProbe = NeighborFace.m_Tag as ProbeInfluence;
if (NeighborProbe.ProbeID != ProbeInfluence.INVALID_PROBEID && (BestProbe == null || NeighborProbe.Importance > BestProbe.Importance))
{
BestProbe = NeighborProbe; // Found a better probe for that face!
}
}
}
if (BestProbe == null)
{
continue; // Still no valid probe found...
}
Face.m_Tag = BestProbe; // Share the probe, don't care...
MissingProbeIDFaces.RemoveAt(FaceIndex); // We can safely remove the face by index since we're browsing the list backward
}
// Update progress
progressBarSubTask.Value = progressBarSubTask.Maximum * (OriginalCount - MissingProbeIDFaces.Count) / OriginalCount;
progressBarSubTask.Refresh();
}
// At this point, either the list of faces missing probe IDs is empty in which case the job is done
// or we need to assign an arbitrary probe ID to those faces
if (MissingProbeIDFaces.Count > 0)
{
FacesWithoutProbeCount += MissingProbeIDFaces.Count;
PrimitivesWithoutProbeCount++;
// TODO: Assign nearest probe or something!
}
// Now that we have valid probe IDs for each face, propagate best probe influence to each vertex
ProbeInfluence[] BestProbePerVertex = new ProbeInfluence[P.m_Vertices.Length];
for (int FaceIndex = 0; FaceIndex < FacesCount; FaceIndex++)
{
GCXFormat.Scene.Mesh.Primitive.Face Face = P.m_Faces[FaceIndex];
ProbeInfluence FaceProbe = P.m_WingedEdgeFaces[FaceIndex].m_Tag as ProbeInfluence;
if (BestProbePerVertex[Face.V0] == null || BestProbePerVertex[Face.V0].Importance < FaceProbe.Importance)
{
BestProbePerVertex[Face.V0] = FaceProbe; // Better probe for that vertex
}
if (BestProbePerVertex[Face.V1] == null || BestProbePerVertex[Face.V1].Importance < FaceProbe.Importance)
{
BestProbePerVertex[Face.V1] = FaceProbe; // Better probe for that vertex
}
if (BestProbePerVertex[Face.V2] == null || BestProbePerVertex[Face.V2].Importance < FaceProbe.Importance)
{
BestProbePerVertex[Face.V2] = FaceProbe; // Better probe for that vertex
}
}
// Finally, we can splat probe IDs into the giant vertex stream
for (int VertexIndex = 0; VertexIndex < P.m_Vertices.Length; VertexIndex++)
{
VertexStreamProbeID[P.m_VertexOffset + VertexIndex] = (UInt32)(BestProbePerVertex[VertexIndex] != null ? BestProbePerVertex[VertexIndex].ProbeID : 0xFFFFFFFF); // TODO <= warn if we still have invalid vertices!
}
}
MeshIndex++;
}
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum;
//////////////////////////////////////////////////////////////////////////
// Save the final vertex stream to disk
FileInfo TargetVertexStreamFile = new FileInfo(Path.Combine(Path.GetDirectoryName(SceneFile.FullName), Path.GetFileNameWithoutExtension(SceneFile.FullName) + "_ProbeID.vertexStream.U16"));
using (FileStream S = TargetVertexStreamFile.Create())
using (BinaryWriter W = new BinaryWriter(S))
{
for (int VertexIndex = 0; VertexIndex < VertexStreamProbeID.Length; VertexIndex++)
{
W.Write(VertexStreamProbeID[VertexIndex]);
}
}
// Notify
MessageBoxIcon Icon = MessageBoxIcon.Information;
string Info = "Success!\r\n";
Info += "Processed " + PrimitivesCount + " primitives for a total of " + GCX.m_TotalFacesCount + " faces and " + GCX.m_TotalVerticesCount + " vertices.\r\n";
if (PrimitivesWithoutProbeCount > 0)
{
Icon = MessageBoxIcon.Warning;
Info += "\r\n---------------------- WARNING ----------------------\r\n";
Info += PrimitivesWithoutProbeCount + " primitives are missing or have incomplete probe information.\r\n";
Info += "A total of " + FacesWithoutProbeCount + " faces don't have probe information!\r\n";
}
if (Errors != "")
{
Icon = MessageBoxIcon.Warning;
Info += "\r\n---------------------- ERRORS ----------------------\r\n";
Info += Errors;
}
MessageBox(Info, MessageBoxButtons.OK, Icon);
}
catch (Exception _e)
{
MessageBox("An error occurred while probe influences in scene file: " + _e.Message, MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
finally
{
progressBarBatchConvert.Visible = false;
progressBarSubTask.Visible = false;
}
}
private void batchEncodeToolStripMenuItem_Click( object sender, EventArgs e )
{
// Ask where to load
string OldFolder = GetRegKey( "LastProbesFolderSource", Path.GetDirectoryName( m_ApplicationPath ) );
folderBrowserDialog.SelectedPath = OldFolder;
if ( folderBrowserDialog.ShowDialog( this ) != DialogResult.OK )
return;
SetRegKey( "LastProbesFolderSource", folderBrowserDialog.SelectedPath );
DirectoryInfo SourceDir = new DirectoryInfo( folderBrowserDialog.SelectedPath );
// Ask where to save
OldFolder = GetRegKey( "LastProbesFolderTarget", Path.GetDirectoryName( m_ApplicationPath ) );
folderBrowserDialog.SelectedPath = OldFolder;
if ( folderBrowserDialog.ShowDialog( this ) != DialogResult.OK )
return;
SetRegKey( "LastProbesFolderTarget", folderBrowserDialog.SelectedPath );
DirectoryInfo TargetDir = new DirectoryInfo( folderBrowserDialog.SelectedPath );
// Batch process!
progressBarBatchConvert.Value = 0;
progressBarBatchConvert.Visible = true;
uint MaxFaceIndex = 0;
Dictionary<UInt32,ProbeInfluence> BestProbeInfluencePerFace = new Dictionary<UInt32,ProbeInfluence>();
string Errors = null;
int ProcessedProbesCount = 0;
List<FileInfo> PomFiles = new List<FileInfo>( SourceDir.GetFiles( "*.pom" ) );
int OriginalFilesCount = PomFiles.Count;
while ( PomFiles.Count > 0 )
{
try
{
FileInfo F = PomFiles[0];
PomFiles.Remove( F );
LoadCubeMap( F );
// Create probe sets
buttonComputeFilling_Click( null, EventArgs.Empty );
// Save result
string TargetFileName = Path.GetFileNameWithoutExtension( F.FullName ) + ".probeset";
FileInfo TargetFile = new FileInfo( Path.Combine( TargetDir.FullName, TargetFileName ) );
m_Probe.SaveSets( TargetFile );
// Process probe influences and keep the best ones for each face
MaxFaceIndex = Math.Max( MaxFaceIndex, m_Probe.m_MaxFaceIndex );
foreach ( uint FaceIndex in m_Probe.m_ProbeInfluencePerFace.Keys )
{
double ProbeImportance = m_Probe.m_ProbeInfluencePerFace[FaceIndex];
if ( !BestProbeInfluencePerFace.ContainsKey( FaceIndex ) )
{ // Use this probe
BestProbeInfluencePerFace[FaceIndex] = new ProbeInfluence() { Importance=ProbeImportance, ProbeID=(UInt32) m_Probe.m_ProbeID };
continue;
}
double ExistingImportance = BestProbeInfluencePerFace[FaceIndex].Importance;
if ( ExistingImportance >= ProbeImportance )
continue;
// We have a better probe
BestProbeInfluencePerFace[FaceIndex].ProbeID = (UInt32) m_Probe.m_ProbeID;
BestProbeInfluencePerFace[FaceIndex].Importance = ProbeImportance;
}
// Update UI
ProcessedProbesCount++;
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum * (OriginalFilesCount - PomFiles.Count) / OriginalFilesCount;
progressBarBatchConvert.Refresh();
outputPanel1.Refresh();
textBoxResults.Refresh();
}
catch ( Exception _e )
{
Errors += _e.Message + "\r\n";
}
}
// Save the final probe influences
FileInfo TargetInfluenceFile = new FileInfo( Path.Combine( TargetDir.FullName, "ProbeInfluence.pim" ) );
using ( FileStream S = TargetInfluenceFile.Create() )
using( BinaryWriter Writer = new BinaryWriter( S ) )
for ( uint FaceIndex=0; FaceIndex < MaxFaceIndex; FaceIndex++ )
{
if ( BestProbeInfluencePerFace.ContainsKey( FaceIndex ) )
{
ProbeInfluence Influence = BestProbeInfluencePerFace[FaceIndex];
Writer.Write( Influence.ProbeID );
Writer.Write( Influence.Importance );
}
else
{
Writer.Write( (int) -1 );
Writer.Write( 0.0 );
}
}
// Notify
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum;
if ( Errors == null )
MessageBox( "Success! " + ProcessedProbesCount + " probes were processed...", MessageBoxButtons.OK, MessageBoxIcon.Information );
else
MessageBox( ProcessedProbesCount + " probes were processed but errors were found:\r\n\r\n" + Errors, MessageBoxButtons.OK, MessageBoxIcon.Warning );
progressBarBatchConvert.Visible = false;
}
private void batchEncodeToolStripMenuItem_Click(object sender, EventArgs e)
{
// Ask where to load
string OldFolder = GetRegKey("LastProbesFolderSource", Path.GetDirectoryName(m_ApplicationPath));
folderBrowserDialog.SelectedPath = OldFolder;
if (folderBrowserDialog.ShowDialog(this) != DialogResult.OK)
{
return;
}
SetRegKey("LastProbesFolderSource", folderBrowserDialog.SelectedPath);
DirectoryInfo SourceDir = new DirectoryInfo(folderBrowserDialog.SelectedPath);
// Ask where to save
OldFolder = GetRegKey("LastProbesFolderTarget", Path.GetDirectoryName(m_ApplicationPath));
folderBrowserDialog.SelectedPath = OldFolder;
if (folderBrowserDialog.ShowDialog(this) != DialogResult.OK)
{
return;
}
SetRegKey("LastProbesFolderTarget", folderBrowserDialog.SelectedPath);
DirectoryInfo TargetDir = new DirectoryInfo(folderBrowserDialog.SelectedPath);
// Batch process!
progressBarBatchConvert.Value = 0;
progressBarBatchConvert.Visible = true;
uint MaxFaceIndex = 0;
Dictionary <UInt32, ProbeInfluence> BestProbeInfluencePerFace = new Dictionary <UInt32, ProbeInfluence>();
string Errors = null;
int ProcessedProbesCount = 0;
List <FileInfo> PomFiles = new List <FileInfo>(SourceDir.GetFiles("*.pom"));
int OriginalFilesCount = PomFiles.Count;
while (PomFiles.Count > 0)
{
try
{
FileInfo F = PomFiles[0];
PomFiles.Remove(F);
LoadCubeMap(F);
// Create probe sets
buttonComputeFilling_Click(null, EventArgs.Empty);
// Save result
string TargetFileName = Path.GetFileNameWithoutExtension(F.FullName) + ".probeset";
FileInfo TargetFile = new FileInfo(Path.Combine(TargetDir.FullName, TargetFileName));
m_Probe.SaveSets(TargetFile);
// Process probe influences and keep the best ones for each face
MaxFaceIndex = Math.Max(MaxFaceIndex, m_Probe.m_MaxFaceIndex);
foreach (uint FaceIndex in m_Probe.m_ProbeInfluencePerFace.Keys)
{
double ProbeImportance = m_Probe.m_ProbeInfluencePerFace[FaceIndex];
if (!BestProbeInfluencePerFace.ContainsKey(FaceIndex))
{ // Use this probe
BestProbeInfluencePerFace[FaceIndex] = new ProbeInfluence()
{
Importance = ProbeImportance, ProbeID = (UInt32)m_Probe.m_ProbeID
};
continue;
}
double ExistingImportance = BestProbeInfluencePerFace[FaceIndex].Importance;
if (ExistingImportance >= ProbeImportance)
{
continue;
}
// We have a better probe
BestProbeInfluencePerFace[FaceIndex].ProbeID = (UInt32)m_Probe.m_ProbeID;
BestProbeInfluencePerFace[FaceIndex].Importance = ProbeImportance;
}
// Update UI
ProcessedProbesCount++;
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum * (OriginalFilesCount - PomFiles.Count) / OriginalFilesCount;
progressBarBatchConvert.Refresh();
outputPanel1.Refresh();
textBoxResults.Refresh();
}
catch (Exception _e)
{
Errors += _e.Message + "\r\n";
}
}
// Save the final probe influences
FileInfo TargetInfluenceFile = new FileInfo(Path.Combine(TargetDir.FullName, "ProbeInfluence.pim"));
using (FileStream S = TargetInfluenceFile.Create())
using (BinaryWriter Writer = new BinaryWriter(S))
for (uint FaceIndex = 0; FaceIndex < MaxFaceIndex; FaceIndex++)
{
if (BestProbeInfluencePerFace.ContainsKey(FaceIndex))
{
ProbeInfluence Influence = BestProbeInfluencePerFace[FaceIndex];
Writer.Write(Influence.ProbeID);
Writer.Write(Influence.Importance);
}
else
{
Writer.Write((int)-1);
Writer.Write(0.0);
}
}
// Notify
progressBarBatchConvert.Value = progressBarBatchConvert.Maximum;
if (Errors == null)
{
MessageBox("Success! " + ProcessedProbesCount + " probes were processed...", MessageBoxButtons.OK, MessageBoxIcon.Information);
}
else
{
MessageBox(ProcessedProbesCount + " probes were processed but errors were found:\r\n\r\n" + Errors, MessageBoxButtons.OK, MessageBoxIcon.Warning);
}
progressBarBatchConvert.Visible = false;
}