Ejemplo n.º 1
0
        private void button1_Click(object sender, EventArgs e)
        {
            PrintLab.OpenPort("ZMIN X1");        //打开打印机端口,打印机驱动的名称一定要正确
            PrintLab.ZM_ClearBuffer();           //清空缓冲区
            PrintLab.ZM_SetPrintSpeed(4);        //设置打印速度,4是4英寸/秒,6是6英寸/秒(X1最高是6,X1i最高是4)
            PrintLab.ZM_SetDarkness(10);         //设置打印黑度(也是打印温度,最高是20,一般蜡质碳带设置为10,混合基碳带设置为12,树脂基碳带设置为18)
            PrintLab.ZM_SetLabelHeight(200, 16); //设置标签的高度和标签之间的行间隙,里面的数值是像素值(200dpi是8点/毫米,300dpi是11.8点/毫米,如果计算出小数需取整)
            PrintLab.ZM_SetLabelWidth(800);      //设置标签的宽度

            PrintByType(1);
            // 开始打印
            PrintLab.ZM_PrintLabel(1, 1);//number:打印标签的数量,cpnumber:每张标签的复制份数

            //关闭打印机端口
            PrintLab.ClosePort();


            PrintLab.OpenPort("ZMIN X1");        //打开打印机端口,打印机驱动的名称一定要正确
            PrintLab.ZM_ClearBuffer();           //清空缓冲区
            PrintLab.ZM_SetPrintSpeed(4);        //设置打印速度,4是4英寸/秒,6是6英寸/秒(X1最高是6,X1i最高是4)
            PrintLab.ZM_SetDarkness(10);         //设置打印黑度(也是打印温度,最高是20,一般蜡质碳带设置为10,混合基碳带设置为12,树脂基碳带设置为18)
            PrintLab.ZM_SetLabelHeight(200, 16); //设置标签的高度和标签之间的行间隙,里面的数值是像素值(200dpi是8点/毫米,300dpi是11.8点/毫米,如果计算出小数需取整)
            PrintLab.ZM_SetLabelWidth(800);      //设置标签的宽度

            PrintByType(2);
            // 开始打印
            PrintLab.ZM_PrintLabel(1, 1);//number:打印标签的数量,cpnumber:每张标签的复制份数

            //关闭打印机端口
            PrintLab.ClosePort();
        }
Ejemplo n.º 2
0
        /// <summary>
        ///  服装小箱号信息打印
        /// </summary>
        public void smallBoxPrint(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(4);                  //设置打印速度
            PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
            PrintLab.PTK_SetLabelHeight(345, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);
            //清空缓冲区
            PrintLab.PTK_ClearBuffer();

            DataTable tbl = (DataTable)printObject;

            string strMasterCTN     = "";
            string strSmallCTN      = "";
            string strOrderNo       = "";
            string strDestination   = "";
            string strCountry       = "";
            string strShopName      = "";
            string strPackageStatus = "";
            string strPackageUser   = "";
            string strPackageDate   = "";

            foreach (DataRow dr in tbl.Rows)
            {
                //Console.WriteLine(dr["SmallCTN"].ToString() + "///" + dr["Destination"].ToString() );


                //strMasterCTN = dr["MasterCTN"].ToString();
                strSmallCTN = dr["SmallCTN"].ToString();
                //strOrderNo = dr["OrderNo"].ToString();
                strDestination = dr["Destination"].ToString();
                //strCountry = dr["Country"].ToString();
                //strShopName = dr["ShopName"].ToString();
                //strPackageStatus = dr["PackageStatus"].ToString();
                //strPackageUser = dr["PackageUser"].ToString();
                //strPackageDate = dr["PackageDate"].ToString();

                if (!strSmallCTN.Equals(""))
                {
                    PrintLab.PTK_DrawTextTrueTypeW(50, 10, 50, 0, "Arial", 1, 100, false, false, false, "A1", "S.CTN NO : ");
                    PrintLab.PTK_DrawTextTrueTypeW(50, 80, 72, 0, "Arial", 1, 90, false, false, false, "A2", "" + strSmallCTN);
                    PrintLab.PTK_DrawTextTrueTypeW(50, 180, 48, 0, "Arial", 1, 300, false, false, false, "A3", "Destination : " + strDestination);
                    PrintLab.PTK_DrawBarcode(60, 250, 0, "1", 2, 2, 25, 'B', strSmallCTN);

                    PrintLab.PTK_DrawTextTrueTypeW(665, 10, 50, 0, "Arial", 1, 100, false, false, false, "A11", "S.CTN NO : ");
                    PrintLab.PTK_DrawTextTrueTypeW(665, 80, 72, 0, "Arial", 1, 90, false, false, false, "A12", "" + strSmallCTN);
                    PrintLab.PTK_DrawTextTrueTypeW(665, 180, 48, 0, "Arial", 1, 300, false, false, false, "A13", "Destination :  " + strDestination);
                    PrintLab.PTK_DrawBarcode(675, 250, 0, "1", 2, 2, 25, 'B', strSmallCTN);

                    // 命令打印机执行打印工作
                    PrintLab.PTK_PrintLabel(1, 1);

                    //清空缓冲区
                    PrintLab.PTK_ClearBuffer();
                }
            }

            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 3
0
        /// <summary>
        ///  定制订单信息打印
        /// </summary>
        public void clothPrint(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(4);                  //设置打印速度
            PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
            PrintLab.PTK_SetLabelHeight(172, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);

            DataTable tbl = (DataTable)printObject;
            DataView  dv  = tbl.DefaultView;
            // 获取总行数
            int rowcount = dv.Count;

            // int index = 1;
            for (int i = 0; i < rowcount; i++)
            {
                //清空缓冲区
                PrintLab.PTK_ClearBuffer();

                DataRowView dr = dv[i];

                string strQcID = dr["QR_ID"].ToString();
                // 条形码
                string strBarCode    = dr["QR_BAR_CODE"].ToString();
                string strCutBarCode = "";
                if (strBarCode.Length > 7)
                {
                    strCutBarCode = strBarCode.Substring(strBarCode.Length - 7);
                }
                else
                {
                    strCutBarCode = strBarCode;
                }
                // 生产号
                string strProCode = dr["PRODUCTION_ORDER"].ToString();
                // 订单号
                string strOrderCode = dr["ORDER_NO"].ToString();
                // 面料号
                string strMarterialCode = dr["QR_OTHER4"].ToString();
                // 画矩形
                //PrintLab.PTK_DrawRectangle(22, 10, 0, 1200, 300);

                // 打印一行TrueTypeFont文字;
                PrintLab.PTK_DrawTextTrueTypeW(350, 50, 41, 0, "Arial", 1, 300, false, false, false, "A1", "生产号 :" + strProCode);
                PrintLab.PTK_DrawTextTrueTypeW(350, 105, 36, 0, "Arial", 1, 100, false, false, false, "A2", "订单号 :" + strOrderCode);
                PrintLab.PTK_DrawBarcode(360, 160, 0, "1", 2, 2, 30, 'B', strBarCode);
                //PrintLab.PTK_DrawTextTrueTypeW(350, 205, 36, 0, "Arial", 1, 100, false, false, false, "A3", "面料号:" + strMarterialCode);
                //PrintLab.PTK_DrawBarcode(360, 250, 0, "1", 3, 3, 35, 'B', strCutBarCode);

                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);
                //updatePrint(strQcID);
            }

            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 4
0
        private void button1_Click(object sender, EventArgs e)
        {
            PrintLab.OpenPort(255);                         //打开打印机端口
            PrintLab.PTK_ClearBuffer();                     //清空缓冲区
            PrintLab.PTK_SetPrintSpeed(1);                  //设置打印速度
            PrintLab.PTK_SetDarkness(60);                   //设置打印黑度
            PrintLab.PTK_SetLabelHeight(160, 19, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(520);                //设置标签的宽度

            for (int i = 1; i <= 1; i++)
            {
                //     Zgke.MyImage.ImageFile.ImagePcx _Pcx = new Zgke.MyImage.ImageFile.ImagePcx();
                //     _Pcx.PcxImage = new Bitmap("logo.bmp");
                //     _Pcx.Save("1.pcx");
                //     // 画矩形
                ////     PrintLab.PTK_DrawRectangle(58, 15, 3, 558, 312);

                //     // 打印PCX图片 方式一
                //     PrintLab.PTK_PcxGraphicsDel("PCX");
                //     PrintLab.PTK_PcxGraphicsDownload("PCX", "1.pcx");
                //     PrintLab.PTK_DrawPcxGraphics(10, 5, "PCX");
                //     PrintLab.PTK_DrawPcxGraphics(260, 5, "PCX");

                // 打印PCX图片 方式二
                // PTK_PrintPCX(80,30,pchar('logo.pcx'));

                // 打印一个条码;
                // PrintLab.PTK_DrawBarcode(300, 23, 0, "1", 2, 2, 50, 'B', "123456789");

                // 画表格分割线
                //PrintLab.PTK_DrawLineOr(58, 100, 500, 3);

                //// 打印一行TrueTypeFont文字;
                PrintLab.PTK_DrawTextTrueTypeW(20, 129, 26, 0, "宋体", 1, 400, false, false, false, "黑体", "1234567890abcdef");

                //// 打印一行文本文字(内置字体或软字体);
                //PrintLab.PTK_DrawText(80, 168, 0, 3, 1, 1, 'N', "Internal Soft Font");

                //// 打印PDF417码
                //PrintLab.PTK_DrawBar2D_Pdf417(80, 210, 400, 300, 0, 0, 3, 7, 10, 2, 0, 0, "123456789");//PDF417码

                //// 打印QR码
                PrintLab.PTK_DrawBar2D_QR(70, 4, 300, 300, 0, 5, 2, 0, 0, "http://www.trtos.com/1234567890abcdef");
                PrintLab.PTK_DrawBar2D_QR(306, 4, 300, 300, 0, 5, 2, 0, 0, "Postek Electronics Co., Ltd.");


                // 打印一行TrueTypeFont文字旋转;
                //   PrintLab.PTK_DrawTextTrueTypeW(520, 102, 22, 0, "Arial", 2, 400, false, false, false, "A2", "www.postek.com.cn");
                //     PrintLab.PTK_DrawTextTrueTypeW(80, 260, 19, 0, "Arial", 1, 700, false, false, false, "A3", "Use different ID_NAME for different Truetype font objects");


                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);
            }
            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 5
0
        /// <summary>
        ///  春衫包装打印
        /// </summary>
        public void packageOrderPrintManagerForWechat(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(2);                  //设置打印速度
            PrintLab.PTK_SetDarkness(8);                    //设置打印黑度
            PrintLab.PTK_SetLabelHeight(400, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);
            //清空缓冲区
            PrintLab.PTK_ClearBuffer();

            DataTable tbl = (DataTable)printObject;

            string countingNo         = "";
            string orderNo            = "";
            string customerName       = "";
            string materialNo         = "";
            string strCustomerOrderNo = "";
            string strQrBarCode       = "";
            string strShopName        = "";

            DataView dv = tbl.DefaultView;

            if (dv.Count > 0)
            {
                DataRowView dr = dv[0];

                countingNo         = dr["QR_NAME"].ToString();
                orderNo            = dr["QR_OTHER10"].ToString();
                customerName       = dr["QR_OTHER12"].ToString();
                strCustomerOrderNo = dr["QR_OTHER10"].ToString();
                materialNo         = dr["QR_OTHER4"].ToString();
                strQrBarCode       = dr["QR_OTHER14"].ToString();
                strShopName        = dr["QR_OTHER11"].ToString();

                PrintLab.PTK_DrawTextTrueTypeW(320, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A2", "" + countingNo);
                PrintLab.PTK_DrawTextTrueTypeW(320, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A3", "" + orderNo);
                PrintLab.PTK_DrawTextTrueTypeW(320, 135, 32, 0, "Cambria", 5, 100, false, false, false, "A4", "" + customerName);
                PrintLab.PTK_DrawTextTrueTypeW(320, 175, 32, 0, "Cambria", 5, 100, false, false, false, "A5", "" + materialNo);
                PrintLab.PTK_DrawBarcode(150, 250, 0, "1", 3, 3, 35, 'N', strQrBarCode);
                PrintLab.PTK_DrawTextTrueTypeW(320, 320, 32, 0, "Cambria", 5, 100, false, false, false, "A6", "" + strShopName);

                PrintLab.PTK_DrawTextTrueTypeW(940, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A12", "" + countingNo);
                PrintLab.PTK_DrawTextTrueTypeW(940, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A13", "" + orderNo);
                PrintLab.PTK_DrawTextTrueTypeW(940, 135, 32, 0, "Cambria", 5, 100, false, false, false, "A14", "" + customerName);
                PrintLab.PTK_DrawTextTrueTypeW(940, 175, 32, 0, "Cambria", 5, 100, false, false, false, "A15", "" + materialNo);
                PrintLab.PTK_DrawBarcode(770, 250, 0, "1", 3, 3, 35, 'N', strQrBarCode);
                PrintLab.PTK_DrawTextTrueTypeW(940, 320, 32, 0, "Cambria", 5, 100, false, false, false, "A16", "" + strShopName);

                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);
            }

            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 6
0
        private void button1_Click(object sender, EventArgs e)
        {
            PrintLab.OpenPort(255);                         //打开打印机端口
            PrintLab.PTK_ClearBuffer();                     //清空缓冲区
            PrintLab.PTK_SetPrintSpeed(4);                  //设置打印速度
            PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
            PrintLab.PTK_SetLabelHeight(600, 16, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(800);                //设置标签的宽度

            for (int i = 1; i <= 1; i++)
            {
                // 画矩形
                PrintLab.PTK_DrawRectangle(58, 15, 3, 558, 312);


                // 打印PCX图片 方式一
                PrintLab.PTK_PcxGraphicsDel("PCX");
                PrintLab.PTK_PcxGraphicsDownload("PCX", "logo.pcx");
                PrintLab.PTK_DrawPcxGraphics(80, 20, "PCX");

                // 打印PCX图片 方式二
                // PTK_PrintPCX(80,30,pchar('logo.pcx'));

                // 打印一个条码;
                PrintLab.PTK_DrawBarcode(300, 23, 0, "1", 2, 2, 50, 'B', "123456789");

                // 画表格分割线
                PrintLab.PTK_DrawLineOr(58, 100, 500, 3);

                // 打印一行TrueTypeFont文字;
                PrintLab.PTK_DrawTextTrueTypeW(80, 120, 40, 0, "Arial", 1, 400, false, false, false, "A1", "TrueTypeFont");

                // 打印一行文本文字(内置字体或软字体);
                PrintLab.PTK_DrawText(80, 168, 0, 3, 1, 1, 'N', "Internal Soft Font");

                // 打印PDF417码
                PrintLab.PTK_DrawBar2D_Pdf417(80, 210, 400, 300, 0, 0, 3, 7, 10, 2, 0, 0, "123456789");//PDF417码

                // 打印QR码
                PrintLab.PTK_DrawBar2D_QR(420, 120, 180, 180, 0, 3, 2, 0, 0, "Postek Electronics Co., Ltd.");


                // 打印一行TrueTypeFont文字旋转;
                PrintLab.PTK_DrawTextTrueTypeW(520, 102, 22, 0, "Arial", 2, 400, false, false, false, "A2", "www.postek.com.cn");
                PrintLab.PTK_DrawTextTrueTypeW(80, 260, 19, 0, "Arial", 1, 700, false, false, false, "A3", "Use different ID_NAME for different Truetype font objects");


                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);
            }
            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 7
0
        private void button1_Click(object sender, EventArgs e)
        {
            PrintLab.OpenPort("ZMIN X1");        //打开打印机端口,打印机驱动的名称一定要正确
            PrintLab.ZM_ClearBuffer();           //清空缓冲区
            PrintLab.ZM_SetPrintSpeed(4);        //设置打印速度,4是4英寸/秒,6是6英寸/秒(X1最高是6,X1i最高是4)
            PrintLab.ZM_SetDarkness(10);         //设置打印黑度(也是打印温度,最高是20,一般蜡质碳带设置为10,混合基碳带设置为12,树脂基碳带设置为18)
            PrintLab.ZM_SetLabelHeight(500, 16); //设置标签的高度和标签之间的行间隙,里面的数值是像素值(200dpi是8点/毫米,300dpi是11.8点/毫米,如果计算出小数需取整)
                                                 //以200dpi打印机X1为例:ZM_SetLabelHeight(500, 16)这样设置是标签高度为500/8=62.5mm,行间隙16/8=2mm
            PrintLab.ZM_SetLabelWidth(800);      //设置标签的宽度
                                                 //以200dpi打印机X1为例:ZM_SetLabelWidth(800)这样设置是标签宽度为800/8=100mm

            for (int i = 1; i <= 1; i++)
            {
                // 画矩形
                PrintLab.ZM_DrawRectangle(50, 10, 3, 460, 340);
                // 画表格分割线
                PrintLab.ZM_DrawLineOr(60, 108, 402, 3);

                // 打印PCX图形
                PrintLab.ZM_PcxGraphicsDel("PCX");
                PrintLab.ZM_PcxGraphicsDownload("PCX", "pic.pcx");
                PrintLab.ZM_DrawPcxGraphics(80, 30, "PCX");

                // 打印一个128 Auto条码;
                PrintLab.ZM_DrawBarcode(80, 208, 0, "1", 2, 2, 50, 'B', "123456789");

                // 打印PDF417码
                PrintLab.ZM_DrawBar2D_Pdf417(80, 300, 400, 300, 0, 0, 3, 7, 10, 2, 0, 0, "123456789");//PDF417码

                // 打印QR码
                PrintLab.ZM_DrawBar2D_QR(360, 30, 180, 180, 0, 3, 2, 0, 0, "ZMIN Electronics Co., Ltd.");

                //打印内置字体点阵文字
                PrintLab.ZM_DrawText(80, 168, 0, 3, 1, 1, 'N', "Internal Font");

                // 打印WINDWOS系统TrueType Font文字;
                PrintLab.ZM_DrawTextTrueTypeW(80, 120, 40, 0, "Arial", 1, 400, false, false, false, "A1", "TrueType Font");

                // 打印WINDWOS系统TrueType Font文字(旋转90度);
                PrintLab.ZM_DrawTextTrueTypeW(420, 102, 22, 0, "Arial", 2, 400, false, false, false, "A2", "www.zmin.com.cn");


                // 开始打印
                PrintLab.ZM_PrintLabel(1, 1);

                //关闭打印机端口
                PrintLab.ClosePort();
            }
        }
Ejemplo n.º 8
0
        private void button1_Click(object sender, EventArgs e)
        {
            PrintLab.OpenPort("ZMIN X1i");       //打开打印机端口
            PrintLab.ZM_ClearBuffer();           //清空缓冲区
            PrintLab.ZM_SetPrintSpeed(4);        //设置打印速度
            PrintLab.ZM_SetDarkness(10);         //设置打印黑度
            PrintLab.ZM_SetLabelHeight(600, 24); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.ZM_SetLabelWidth(800);      //设置标签的宽度

            for (int i = 1; i <= 1; i++)
            {
                // 画矩形
                PrintLab.ZM_DrawRectangle(50, 10, 3, 460, 340);
                // 画表格分割线
                PrintLab.ZM_DrawLineOr(60, 108, 402, 3);

                // 打印PCX图形
                PrintLab.ZM_PcxGraphicsDel("PCX");
                PrintLab.ZM_PcxGraphicsDownload("PCX", "pic.pcx");
                PrintLab.ZM_DrawPcxGraphics(80, 30, "PCX");

                // 打印一个128 Auto条码;
                PrintLab.ZM_DrawBarcode(80, 208, 0, "1", 2, 2, 50, 'B', "123456789");

                // 打印PDF417码
                PrintLab.ZM_DrawBar2D_Pdf417(80, 300, 400, 300, 0, 0, 3, 7, 10, 2, 0, 0, "123456789");//PDF417码

                // 打印QR码
                PrintLab.ZM_DrawBar2D_QR(360, 30, 180, 180, 0, 3, 2, 0, 0, "ZMIN Electronics Co., Ltd.");

                //打印内置字体点阵文字
                PrintLab.ZM_DrawText(80, 168, 0, 3, 1, 1, 'N', "Internal Font");

                // 打印WINDWOS系统TrueType Font文字;
                PrintLab.ZM_DrawTextTrueTypeW(80, 120, 40, 0, "Arial", 1, 400, false, false, false, "A1", "TrueType Font");

                // 打印WINDWOS系统TrueType Font文字(旋转90度);
                PrintLab.ZM_DrawTextTrueTypeW(420, 102, 22, 0, "Arial", 2, 400, false, false, false, "A2", "www.zmin.com.cn");


                // 开始打印
                PrintLab.ZM_PrintLabel(1, 1);

                //关闭打印机端口
                PrintLab.ClosePort();
            }
        }
Ejemplo n.º 9
0
        public static void PrintLabel(DataTable dt, int count)
        {
            PrintLab.OpenPort("POSTEK TX2r");//打开打印机端口


            uint   copynumber = Convert.ToUInt16(count);
            string eqNo       = "";
            string eqName     = "";
            string buyDate    = "";
            string depart     = "";

            for (int i = 0; i < dt.Rows.Count; i++)
            {
                PrintLab.PTK_ClearBuffer();                     //清空缓冲区
                PrintLab.PTK_SetPrintSpeed(4);                  //设置打印速度
                PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
                PrintLab.PTK_SetLabelHeight(320, 16, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
                PrintLab.PTK_SetLabelWidth(560);                //设置标签的宽度

                eqNo    = dt.Rows[i]["资产编码"].ToString();
                eqName  = dt.Rows[i]["资产名称"].ToString();
                buyDate = dt.Rows[i]["取得日期"].ToString();
                depart  = dt.Rows[i]["使用部门"].ToString();

                // 画矩形
                PrintLab.PTK_DrawRectangle(8, 8, 10, 552, 312);

                // 画表格分割线
                PrintLab.PTK_DrawLineOr(8, 88, 544, 5);
                PrintLab.PTK_DrawLineOr(8, 144, 544, 5);
                PrintLab.PTK_DrawLineOr(8, 200, 368, 5);
                PrintLab.PTK_DrawLineOr(8, 256, 368, 5);
                PrintLab.PTK_DrawLineOr(140, 88, 5, 224);
                PrintLab.PTK_DrawLineOr(376, 144, 5, 168);

                // 打印标签样式
                //PrintLab.PTK_DrawTextTrueTypeW(120, 18, 40, 0, "Arial", 1, 400, false, false, false, "company", "深圳大学师范学院");
                PrintLab.PTK_DrawTextTrueTypeW(20, 98, 30, 0, "宋体", 1, 400, false, false, false, "EqName", "资产名称");
                PrintLab.PTK_DrawTextTrueTypeW(20, 154, 30, 0, "宋体", 1, 400, false, false, false, "EqNo", "资产编码");
                PrintLab.PTK_DrawTextTrueTypeW(20, 210, 30, 0, "宋体", 1, 400, false, false, false, "BuyDate", "购置年月");
                PrintLab.PTK_DrawTextTrueTypeW(20, 266, 30, 0, "宋体", 1, 400, false, false, false, "Depart", "使用部门");

                PrintLab.PTK_DrawTextTrueTypeW(150, 98, 30, 0, "宋体", 1, 400, false, false, false, "sEqName", eqName);
                PrintLab.PTK_DrawTextTrueTypeW(150, 154, 30, 0, "宋体", 1, 400, false, false, false, "sEqNo", eqNo);
                PrintLab.PTK_DrawTextTrueTypeW(150, 210, 30, 0, "宋体", 1, 400, false, false, false, "sBuyDate", buyDate);
                PrintLab.PTK_DrawTextTrueTypeW(150, 266, 30, 0, "宋体", 1, 400, false, false, false, "sDepart", depart);

                // 打印QR码
                PrintLab.PTK_DrawBar2D_QR(400, 180, 180, 180, 0, 5, 2, 0, 0, eqNo);


                // 打印PCX图片 方式一
                PrintLab.PTK_PcxGraphicsDel("PCX");
                PrintLab.PTK_PcxGraphicsDownload("PCX", "logo.pcx");
                PrintLab.PTK_DrawPcxGraphics(18, 20, "PCX");



                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, copynumber);
            }
            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 10
0
    protected void btn_Ok_Click(object sender, EventArgs e)
    {
        PrintLab.OpenPort("POSTEK C168/200s"); //打开打印机端口
        PrintLab.PTK_ClearBuffer();            //清空缓冲区
        PrintLab.PTK_SetPrintSpeed(4);         //设置打印速度
        PrintLab.PTK_SetDarkness(10);          //设置打印黑度
        PrintLab.PTK_SetLabelHeight(360, 16);  //设置标签的高度和定位间隙\黑线\穿孔的高度
        PrintLab.PTK_SetLabelWidth(600);       //设置标签的宽度

        for (int i = 1; i <= 1; i++)
        {
            // 画矩形
            PrintLab.PTK_DrawRectangle(42, 30, 5, 558, 260);

            // 画表格分割线
            PrintLab.PTK_DrawLineOr(42, 107, 516, 5);
            PrintLab.PTK_DrawLineOr(42, 184, 516, 5);
            //PrintLab.PTK_DrawLineOr(42, 261, 516, 5);

            // 打印一行TrueTypeFont文字;123456789

            string Name = Request.Form["Name"].ToString();
            string std  = Request.Form["std"].ToString();
            string Time = Request.Form["Time"].ToString();
            PrintLab.PTK_DrawTextTrueTypeW(70, 50, 40, 0, "Arial", 1, 600, false, false, false, "A1", Name);
            //PrintLab.PTK_DrawTextTrueTypeW(70, 130, 40, 0, "Arial", 1, 600, false, false, false, "A1", std);
            // PrintLab.PTK_DrawTextTrueTypeW(70, 200, 40, 0, "Arial", 1, 600, false, false, false, "A1", Time);

            // 打印一个条码;

            PrintLab.PTK_DrawBarcode(240, 285, 0, "1", 2, 4, 64, 'N', "ASDQ123456789");


            //// 打印PCX图片 方式一
            //PrintLab.PTK_PcxGraphicsDel("PCX");
            //PrintLab.PTK_PcxGraphicsDownload("PCX", "logo.pcx");
            //PrintLab.PTK_DrawPcxGraphics(80, 20, "PCX");

            //// 打印PCX图片 方式二
            //// PTK_PrintPCX(80,30,pchar('logo.pcx'));

            //// 打印一行文本文字(内置字体或软字体);
            //PrintLab.PTK_DrawText(80, 168, 0, 3, 1, 1, 'N', "Internal Soft Font");

            //// 打印PDF417码
            //PrintLab.PTK_DrawBar2D_Pdf417(80, 210, 400, 300, 0, 0, 3, 7, 10, 2, 0, 0, "123456789");//PDF417码

            //// 打印QR码
            //PrintLab.PTK_DrawBar2D_QR(420, 120, 180, 180, 0, 3, 2, 0, 0, "Postek Electronics Co., Ltd.");


            //// 打印一行TrueTypeFont文字旋转;
            //PrintLab.PTK_DrawTextTrueTypeW(520, 102, 22, 0, "Arial", 2, 400, false, false, false, "A2", "www.postek.com.cn");
            //PrintLab.PTK_DrawTextTrueTypeW(80, 260, 19, 0, "Arial", 1, 700, false, false, false, "A3", "Use different ID_NAME for different Truetype font objects");


            // 命令打印机执行打印工作
            PrintLab.PTK_PrintLabel(1, 2);
            PrintLab.ClosePort();//关闭打印机端口
        }
    }
Ejemplo n.º 11
0
        /// <summary>
        ///  正常单裁 订扣 信息打印
        /// </summary>
        public void sbuPrint(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(4);                  //设置打印速度
            PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
            PrintLab.PTK_SetLabelHeight(172, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);
            // 清空缓冲区
            PrintLab.PTK_ClearBuffer();

            DataTable tbl = (DataTable)printObject;
            DataView  dv  = tbl.DefaultView;

            // 获取总行数
            int rowcount = dv.Count;
            // 条码ID
            string strQcID = "";

            for (int i = 0; i < rowcount; i++)
            {
                DataRowView dr = dv[i];
                strQcID = dr["QR_ID"].ToString();

                // 条形码
                string strBarCode = dr["QR_BAR_CODE"].ToString();
                // 生产号
                string strProNo = dr["PRODUCTION_ORDER"].ToString();
                // 大扣数
                string strSBU1 = dr["QR_OTHER2"].ToString();
                // 小扣数
                string strSBU2 = dr["QR_OTHER3"].ToString();
                // 扣
                string strSBU = dr["QR_OTHER4"].ToString();
                // 订扣
                string strSAT = dr["QR_OTHER5"].ToString();
                // 扣眼颜色
                string strSBT = dr["QR_OTHER6"].ToString();
                // 打印一行 左侧
                PrintLab.PTK_DrawTextTrueTypeW(350, 14, 40, 0, "Arial", 1, 41, false, false, false, "A1", "生产号   :" + strProNo);
                PrintLab.PTK_DrawTextTrueTypeW(350, 55, 40, 0, "Arial", 1, 41, false, false, false, "A2", "大扣数   :" + strSBU1);
                PrintLab.PTK_DrawTextTrueTypeW(350, 95, 40, 0, "Arial", 1, 41, false, false, false, "A3", "小扣数   :" + strSBU2);
                PrintLab.PTK_DrawTextTrueTypeW(350, 135, 40, 0, "Arial", 1, 41, false, false, false, "A4", "扣   :" + strSBU);
                PrintLab.PTK_DrawTextTrueTypeW(350, 175, 40, 0, "Arial", 1, 41, false, false, false, "A5", "订扣  :" + strSAT);
                PrintLab.PTK_DrawTextTrueTypeW(350, 225, 40, 0, "Arial", 1, 41, false, false, false, "A6", "订扣线颜色:" + strSBT);
                PrintLab.PTK_DrawBarcode(380, 280, 0, "1", 2, 2, 30, 'B', strBarCode);

                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);

                // 清空缓冲区
                PrintLab.PTK_ClearBuffer();

                //updatePrint(strQcID);
            }

            // 命令打印机执行打印工作
            PrintLab.PTK_PrintLabel(1, 1);
            //updatePrint(strQcID);

            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 12
0
        /// <summary>
        ///  裁剪信息打印
        /// </summary>
        public void clipOrderPrint(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(5);                  //设置打印速度
            PrintLab.PTK_SetDarkness(10);                   //设置打印黑度
            //PrintLab.PTK_SetLabelHeight(345, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelHeight(260, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);

            DataTable tbl = (DataTable)printObject;

            String strQrId            = "";
            String strOrderNo         = "";
            String strProductOrder    = "";
            String strCustomerOrderNo = "";
            String strBarCode         = "";
            String strClipNumber      = "";

            DataView dv = tbl.DefaultView;

            if (dv.Count > 0)
            {
                DataRowView dr = dv[0];
                strQrId            = dr["QR_ID"].ToString();
                strOrderNo         = dr["QR_OTHER0"].ToString();
                strProductOrder    = dr["QR_OTHER9"].ToString();
                strCustomerOrderNo = dr["QR_NAME"].ToString();
                strBarCode         = dr["QR_BAR_CODE"].ToString();
                strClipNumber      = dr["QR_CLIP_NUMBER"].ToString();

                int iPageNumber = int.Parse(strClipNumber) / 2;
                int iRemain     = int.Parse(strClipNumber) % 2;

                for (int i = 0; i < iPageNumber; i++)
                {
                    //清空缓冲区
                    PrintLab.PTK_ClearBuffer();

                    PrintLab.PTK_DrawTextTrueTypeW(210, 40, 35, 0, "Arial", 1, 300, false, false, false, "A1", "生产号: " + strProductOrder);
                    PrintLab.PTK_DrawBarcode(225, 100, 0, "1", 2, 2, 30, 'B', strBarCode);

                    PrintLab.PTK_DrawTextTrueTypeW(650, 40, 35, 0, "Arial", 1, 300, false, false, false, "A2", "生产号: " + strProductOrder);
                    PrintLab.PTK_DrawBarcode(665, 100, 0, "1", 2, 2, 30, 'B', strBarCode);

                    // 命令打印机执行打印工作
                    PrintLab.PTK_PrintLabel(1, 1);
                }

                if (iRemain > 0)
                {
                    //清空缓冲区
                    PrintLab.PTK_ClearBuffer();

                    PrintLab.PTK_DrawTextTrueTypeW(210, 40, 35, 0, "Arial", 1, 300, false, false, false, "A3", "生产号: " + strProductOrder);
                    PrintLab.PTK_DrawBarcode(225, 100, 0, "1", 2, 2, 30, 'B', strBarCode);

                    // 命令打印机执行打印工作
                    PrintLab.PTK_PrintLabel(1, 1);
                }
            }

            PrintLab.ClosePort();//关闭打印机端口
        }
Ejemplo n.º 13
0
        /// <summary>
        ///  服装包装信息打印
        /// </summary>
        public void packageOrderPrintManager(object printObject)
        {
            PrintLab.OpenPort("POSTEK G-3106");             //打开打印机端口
            PrintLab.PTK_SetPrintSpeed(2);                  //设置打印速度
            PrintLab.PTK_SetDarkness(8);                    //设置打印黑度
            PrintLab.PTK_SetLabelHeight(400, 15, 0, false); //设置标签的高度和定位间隙\黑线\穿孔的高度
            PrintLab.PTK_SetLabelWidth(1252);               //设置标签的宽度
            PrintLab.PTK_SetDarkness(0);
            //清空缓冲区
            PrintLab.PTK_ClearBuffer();

            DataTable tbl = (DataTable)printObject;

            string strShopName        = "";
            string strCustomerName    = "";
            string strProductOrder    = "";
            string strCustomerOrderNo = "";
            string strQrBarCode       = "";
            string strMakeType        = "";
            string strSmallBox        = "";
            string strTailor          = "";
            string strDestinationCode = "";
            string strHangerSize      = "";
            string strShirtItem       = "";
            string strHangtag         = "";
            string strShopNumber      = "";

            int iPx1 = 0;
            int iPx2 = 0;

            DataView dv = tbl.DefaultView;

            if (dv.Count > 0)
            {
                DataRowView dr = dv[0];

                strShopName        = dr["QR_OTHER11"].ToString();
                strCustomerName    = dr["QR_OTHER12"].ToString();
                strProductOrder    = dr["QR_OTHER9"].ToString();
                strCustomerOrderNo = dr["QR_OTHER10"].ToString();
                strQrBarCode       = "*" + dr["QR_BAR_CODE"].ToString() + "*";
                strMakeType        = dr["QR_OTHER13"].ToString();
                strSmallBox        = dr["QR_OTHER15"].ToString();
                strTailor          = dr["QR_OTHER21"].ToString();
                strDestinationCode = dr["QR_OTHER22"].ToString();
                strHangerSize      = dr["QR_OTHER23"].ToString();
                strShirtItem       = dr["QR_OTHER24"].ToString();
                strHangtag         = dr["QR_OTHER19"].ToString();
                strShopNumber      = dr["QR_OTHER25"].ToString();

                if (!"".Equals(strHangerSize))
                {
                    strHangerSize = "{" + strHangerSize + "}";
                }

                if (strQrBarCode.Length == 8)
                {
                    iPx1 = 145;
                    iPx2 = 670 + 100;
                }
                else if (strQrBarCode.Length == 12)
                {
                    iPx1 = 90;
                    iPx2 = 670 + 40;
                }
                else if (strQrBarCode.Length == 13)
                {
                    iPx1 = 70;
                    iPx2 = 670 + 20;
                }
                else if (strQrBarCode.Length == 14)
                {
                    iPx1 = 130;
                    iPx2 = 670 + 80;
                }
                else
                {
                    iPx1 = 90;
                    iPx2 = 670 + 40;
                }

                if (strQrBarCode.Length < 14)
                {
                    PrintLab.PTK_DrawTextTrueTypeW(320, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A2", "" + strCustomerOrderNo);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A3", "" + strShopName + "," + strTailor);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 125, 32, 0, "Cambria", 5, 100, false, false, false, "A4", "" + strCustomerName);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 170, 36, 0, "Cambria", 5, 100, false, false, false, "A7", "" + strShopNumber);
                    PrintLab.PTK_DrawBarcode((uint)iPx1, 200, 0, "1", 3, 3, 35, 'N', strQrBarCode);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 270, 36, 0, "Cambria", 5, 100, false, false, false, "A5", "" + strDestinationCode + strHangerSize + "|[" + strMakeType + "]" + strShirtItem);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 305, 36, 0, "Cambria", 5, 100, false, false, false, "A6", "" + strHangtag);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 335, 38, 0, "Cambria", 5, 100, false, false, false, "A1", "" + strSmallBox);

                    PrintLab.PTK_DrawTextTrueTypeW(940, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A12", "" + strCustomerOrderNo);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A13", "" + strShopName + "," + strTailor);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 125, 32, 0, "Cambria", 5, 100, false, false, false, "A14", "" + strCustomerName);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 170, 36, 0, "Cambria", 5, 100, false, false, false, "A17", "" + strShopNumber);
                    PrintLab.PTK_DrawBarcode((uint)iPx2, 200, 0, "1", 3, 3, 35, 'N', strQrBarCode);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 270, 36, 0, "Cambria", 5, 100, false, false, false, "A15", "" + strDestinationCode + strHangerSize + "|[" + strMakeType + "]" + strShirtItem);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 305, 36, 0, "Cambria", 5, 100, false, false, false, "A16", "" + strHangtag);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 335, 38, 0, "Cambria", 5, 100, false, false, false, "A11", "" + strSmallBox);
                }
                else
                {
                    PrintLab.PTK_DrawTextTrueTypeW(320, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A2", "" + strCustomerOrderNo);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A3", "" + strShopName + "," + strTailor);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 125, 32, 0, "Cambria", 5, 100, false, false, false, "A4", "" + strCustomerName);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 170, 36, 0, "Cambria", 5, 100, false, false, false, "A7", "" + strShopNumber);
                    PrintLab.PTK_DrawBarcode((uint)iPx1, 200, 0, "1", 2, 3, 35, 'N', strQrBarCode);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 270, 36, 0, "Cambria", 5, 100, false, false, false, "A5", "" + strDestinationCode + strHangerSize + "|[" + strMakeType + "]" + strShirtItem);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 305, 36, 0, "Cambria", 5, 100, false, false, false, "A6", "" + strHangtag);
                    PrintLab.PTK_DrawTextTrueTypeW(320, 335, 38, 0, "Cambria", 5, 100, false, false, false, "A1", "" + strSmallBox);

                    PrintLab.PTK_DrawTextTrueTypeW(940, 50, 40, 0, "Cambria", 5, 100, false, false, false, "A12", "" + strCustomerOrderNo);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 90, 32, 0, "Cambria", 5, 100, false, false, false, "A13", "" + strShopName + "," + strTailor);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 125, 32, 0, "Cambria", 5, 100, false, false, false, "A14", "" + strCustomerName);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 170, 36, 0, "Cambria", 5, 100, false, false, false, "A17", "" + strShopNumber);
                    PrintLab.PTK_DrawBarcode((uint)iPx2, 200, 0, "1", 2, 3, 35, 'N', strQrBarCode);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 270, 36, 0, "Cambria", 5, 100, false, false, false, "A15", "" + strDestinationCode + strHangerSize + "|[" + strMakeType + "]" + strShirtItem);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 305, 36, 0, "Cambria", 5, 100, false, false, false, "A16", "" + strHangtag);
                    PrintLab.PTK_DrawTextTrueTypeW(940, 335, 38, 0, "Cambria", 5, 100, false, false, false, "A11", "" + strSmallBox);
                }

                // 命令打印机执行打印工作
                PrintLab.PTK_PrintLabel(1, 1);
            }

            PrintLab.ClosePort();//关闭打印机端口
        }