public void Generate(Polygon _polygon)
{
_rimParts.Clear ();
_rimLofters.Clear ();
_corners.Clear ();
foreach (Transform child in _rim.transform)
{
GameObject.Destroy (child.gameObject);
}
_rars.Subdivide (_polygon);
Polygon subdividedPolygon = new Polygon (_rars.GetSubdividedPolygon ());
subdividedPolygon.SetClosed (_polygon.IsClosed ());
//******************* OBTENTION DU PROFILE A EXTERNALISER ********************//
PolygonRawData shapeRaw = new PolygonRawData ();
/*shapeRaw.Add (new Vector2 (0, 0));
shapeRaw.Add (new Vector2 (0, 0.01f));
shapeRaw.Add (new Vector2 (-0.015f, 0.026f));
shapeRaw.Add (new Vector2 (-0.015f, 0.042f));
shapeRaw.Add (new Vector2 (-0.006f, 0.06f));
shapeRaw.Add (new Vector2 (0.01f, 0.069f));
shapeRaw.Add (new Vector2 (0.03f, 0.071f));
shapeRaw.Add (new Vector2 (0.049f, 0.066f));
shapeRaw.Add (new Vector2 (0.071f, 0.06f));
shapeRaw.Add (new Vector2 (0.1f, 0.052f));
shapeRaw.Add (new Vector2 (0.169f, 0.044f));
shapeRaw.Add (new Vector2 (0.249f, 0.041f));
shapeRaw.Add (new Vector2 (0.29f, 0.04f));
shapeRaw.Add (new Vector2 (0.298f, 0.038f));
shapeRaw.Add (new Vector2 (0.305f, 0.033f));
shapeRaw.Add (new Vector2 (0.309f, 0.024f));
shapeRaw.Add (new Vector2 (0.31f, 0.014f));
shapeRaw.Add (new Vector2 (0.31f, 0));*/
shapeRaw.Add (new Vector2 (-0.02f, 0.0f));
shapeRaw.Add (new Vector2 (0.28f, 0.0f));
shapeRaw.Add (new Vector2 (0.28f, 0.001f));
shapeRaw.Add (new Vector2 (-0.02f, 0.001f));
Polygon profile = new Polygon (shapeRaw);
profile.SetClosed (false);
//************************************************************************//
Polygon currentPortion = null;
bool inPortion = false;
bool inCurve = false;
int pointCounter = 0;
int indexOffset = 0;
// pour chaque point du polygon subdivisé
// si c'est un angle prédéfini on charge le mesh margelle associé
// sinon on crée un section avec l'outil loft jusqu'au prochain angle prédéfini
foreach (Point2 currentPoint in subdividedPolygon.GetPoints ())
{
float angle = currentPoint.GetAngle ();
AngleType angleType = currentPoint.GetAngleType ();
if (inPortion || inCurve)
{
Point2 pointToAdd = new Point2 (currentPoint);
currentPortion.AddPoint (pointToAdd);
}
Edge2 nextEdge = currentPoint.GetNextEdge ();
Edge2 prevEdge = currentPoint.GetPrevEdge ();
Point2 nextPoint = null;
Point2 prevPoint = null;
if (nextEdge != null)
{
nextPoint = nextEdge.GetNextPoint2 ();
prevPoint = prevEdge.GetPrevPoint2 ();
float nextAngle = nextPoint.GetAngle ();
AngleType nextAngleType = nextPoint.GetAngleType ();
// stop case for onr portion
if (Utils.Approximately (nextAngle, 90) && inPortion && nextAngleType == AngleType.Outside)
{
inPortion = false;
currentPortion.SetClosed (false);
GameObject portionGO = new GameObject ("portion");
portionGO.transform.parent = _rim.transform;
portionGO.transform.localPosition = Vector3.zero;
portionGO.transform.localRotation = Quaternion.identity;
portionGO.transform.localScale = Vector3.one;
portionGO.AddComponent<MeshRenderer> ();
MeshFilter meshFilter = portionGO.AddComponent<MeshFilter> ();
PolygonLofter polyLofter = new PolygonLofter (currentPortion, profile, meshFilter.mesh);
polyLofter.SetCurveIndices (_rars.GetCurveIndices ());
polyLofter.SetIndexedAngleType (_rars.GetIndexedAngleType ());
polyLofter.SetIndexOffset (indexOffset + 1, subdividedPolygon.GetPoints ().Count);
polyLofter.Generate ();
portionGO.GetComponent<Renderer>().material = _portionMaterial;
_rimParts.Add (currentPortion);
_rimLofters.Add (polyLofter);
}
// angle prédéfini (90°) --> piece a charger
if (Utils.Approximately (angle, 90) && angleType == AngleType.Outside)
{
_corners.Add (currentPoint);
Vector3 angleRimPosition = new Vector3 (currentPoint.GetX (),
0,
currentPoint.GetY ());
Vector2 nextEdgeDirection = currentPoint.GetNextEdge ().ToVector2 ();
Vector3 toDirection = new Vector3 (nextEdgeDirection.x, 0, nextEdgeDirection.y);
Quaternion angleRimOrientation = Quaternion.LookRotation (toDirection);
GameObject rimCorner = Object.Instantiate (Resources.Load ("PoolDesigner/rimCorner")) as GameObject;
rimCorner.transform.parent = _rim.transform;
rimCorner.transform.localPosition = angleRimPosition;
rimCorner.transform.localRotation = angleRimOrientation;
rimCorner.transform.localScale = Vector3.one;
//rimCorner.transform.GetChild (0).GetChild (1).renderer.material = _portionMaterial;
rimCorner.transform.GetChild (0).GetChild (0).GetComponent<Renderer>().material = _portionMaterial;
if (!inPortion)
{
inPortion = true;
indexOffset = pointCounter;
currentPortion = new Polygon ();
}
}
/* if (Utils.Approximately (nextAngle, 90) && (currentPoint.GetX()==nextPoint.GetX()) && (currentPoint.GetY()==nextPoint.GetY())
&& (currentPoint.GetX()==prevPoint.GetX()) && (currentPoint.GetY()==prevPoint.GetY()))
{
_corners.Add (currentPoint);
Vector3 angleRimPosition = new Vector3 (currentPoint.GetX (),
0,
currentPoint.GetY ());
Vector2 nextEdgeDirection = nextPoint.GetNextEdge ().ToVector2();
Vector3 toDirection = new Vector3 (nextEdgeDirection.x, 0, nextEdgeDirection.y);
Quaternion angleRimOrientation = Quaternion.LookRotation (toDirection);
GameObject rimCorner = Object.Instantiate (Resources.Load ("PoolDesigner/rimCorner")) as GameObject;
rimCorner.transform.parent = _rim.transform;
rimCorner.transform.localPosition = angleRimPosition;
rimCorner.transform.localRotation = angleRimOrientation;
rimCorner.transform.localScale = Vector3.one;
//rimCorner.transform.GetChild (0).GetChild (1).renderer.material = _portionMaterial;
rimCorner.transform.GetChild (0).GetChild (0).renderer.material = _portionMaterial;
if (!inPortion)
{
inPortion = true;
indexOffset = pointCounter;
currentPortion = new Polygon ();
}
}*/
}
++pointCounter;
}
if (inPortion) // si on etait entrain d'ajouter des points a une portion
{
if (_polygon.IsClosed ()) // on ajoute les points restants
{
inPortion = false;
Point2 currentPoint = subdividedPolygon.GetPoints ()[0];
float angle = currentPoint.GetAngle ();
AngleType angleType = currentPoint.GetAngleType ();
while (!Utils.Approximately (angle, 90) || angleType == AngleType.Inside)
{
Point2 pointToAdd = new Point2 (currentPoint);
currentPortion.AddPoint (pointToAdd);
currentPoint = currentPoint.GetNextEdge ().GetNextPoint2 ();
angle = currentPoint.GetAngle ();
angleType = currentPoint.GetAngleType ();
}
}
GameObject portionGO = new GameObject ("portion");
portionGO.transform.parent = _rim.transform;
portionGO.transform.localPosition = Vector3.zero;
portionGO.transform.localRotation = Quaternion.identity;
portionGO.transform.localScale = Vector3.one;
portionGO.AddComponent<MeshRenderer> ();
MeshFilter meshFilter = portionGO.AddComponent<MeshFilter> ();
PolygonLofter polyLofter = new PolygonLofter (currentPortion, profile, meshFilter.mesh);
polyLofter.SetIndexOffset (indexOffset + 1, subdividedPolygon.GetPoints ().Count);
polyLofter.SetCurveIndices (_rars.GetCurveIndices ());
polyLofter.SetIndexedAngleType (_rars.GetIndexedAngleType ());
polyLofter.Generate ();
portionGO.GetComponent<Renderer>().material = _portionMaterial;
_rimParts.Add (currentPortion);
_rimLofters.Add (polyLofter);
}
// Cas ou il n'y a pas de d'angle predefini
// une seule portion qui correspond au polygone subdivise
if (_corners.Count == 0)
{
GameObject portionGO = new GameObject ("portion");
portionGO.transform.parent = _rim.transform;
portionGO.transform.localPosition = Vector3.zero;
portionGO.transform.localRotation = Quaternion.identity;
portionGO.transform.localScale = Vector3.one;
portionGO.AddComponent<MeshRenderer> ();
MeshFilter meshFilter = portionGO.AddComponent<MeshFilter> ();
PolygonLofter polyLofter = new PolygonLofter (subdividedPolygon, profile, meshFilter.mesh);
polyLofter.SetIndexOffset (0, subdividedPolygon.GetPoints ().Count);
polyLofter.SetCurveIndices (_rars.GetCurveIndices ());
polyLofter.SetIndexedAngleType (_rars.GetIndexedAngleType ());
polyLofter.Generate ();
portionGO.GetComponent<Renderer>().material = _portionMaterial;
_rimParts.Add (_polygon);
_rimLofters.Add (polyLofter);
}
_rimCount = 0;
foreach (PolygonLofter lofter in _rimLofters)
{
_rimCount += lofter.GetRimCount ();
}
_rimCount += _corners.Count;
}
public void Generate(Polygon _polygon)
{
//_polygon = new Polygon(_polygon.GenerateWithCurveInverse());
// On genere les meshs des composants de la piscine
if (_polygon.GetPoints ().Count < 3)
return;
if (!_polygon.IsClosed ())
{
_polygon.Close ();
}
_polygon = _polygon.GetMirrorX();
_polygon.UpdateBounds ();
Vector2 translation = _polygon.GetPolygonCenter () * -1;
Vector2 mirror = new Vector2(1,-1);
// exprime le polygone en coordonnées monde, avec son repere centré sur son centre
PolygonRawData polyRaw = new PolygonRawData ();
foreach (Vector2 pt in _polygon.GenerateWithCurve ())
//foreach (Vector2 pt in _polygon.GenerateWithCurveInverse ())
//PolygonRawData polydata = _polygon.GenerateWithCurveInverse ();
//polydata.Reverse();
//foreach (Vector2 pt in polydata)
{
Vector2 transformedPt = (pt + translation) * _polygonScaleFactor;
/*Vector2 newpt = new Vector2();
newpt.x=pt.x;
newpt.y=pt.y;
newpt.y = 2*_polygon.bounds.center.z - newpt.y;
Vector2 transformedPt = (newpt + translation) * _polygonScaleFactor;*/
polyRaw.Add (transformedPt);
}
_transformedPolygon = new Polygon (polyRaw);
// generate liner
Mesh linerMesh = _liner.GetComponent<MeshFilter> ().mesh;
PolygonExtruder linerExtrusion = new PolygonExtruder (_transformedPolygon, linerMesh, -1.5f, false, true, true);
linerExtrusion.Generate ();
LinerScatteringMapper lsm = new LinerScatteringMapper (linerMesh);
lsm.Generate ();
PolygonExtruderMapper pem = new PolygonExtruderMapper (linerExtrusion);
pem.Generate ();
// generate sidewalk
Mesh sidewalkMesh = _sidewalk.GetComponent<MeshFilter> ().mesh;
SideWalkExtruder se = new SideWalkExtruder (_transformedPolygon, sidewalkMesh, -0.02f, 2);
se.Generate ();
PlannarMapper pm = new PlannarMapper (sidewalkMesh, Vector3.up);
pm.Generate ();
// generate rim
_rimGenerator.Generate (_polygon);
// generate occlusion
PolygonRawData occluShape = new PolygonRawData ();
occluShape.Add (new Vector2 (0.28f, 0));
occluShape.Add (new Vector2 (0.33f, 0));
Polygon occluProfile = new Polygon (occluShape);
occluProfile.SetClosed (false);
Mesh occluMesh = _occlusion.GetComponent<MeshFilter> ().mesh;
PolygonLofter occluLofter = new PolygonLofter (_transformedPolygon, occluProfile, occluMesh);
_occlusion.GetComponent<Renderer>().enabled = false;
occluLofter.Generate ();
// generate water
Mesh waterMesh = _water.GetComponent<MeshFilter> ().mesh;
PolygonExtruder waterPlan = new PolygonExtruder (_transformedPolygon, waterMesh, 0, true, false, false);
waterPlan.Generate ();
PlannarMapper waterMapper = new PlannarMapper (waterMesh, Vector3.down, UVChannel.uv0, 5);
waterMapper.Generate ();
// generate frieze
Mesh friezeMesh = _frieze.GetComponent<MeshFilter> ().mesh;
PolygonExtruder friezeExtrusion = new PolygonExtruder (_transformedPolygon, friezeMesh, -0.10f, false, false, true);
friezeExtrusion.Generate ();
PolygonExtruderMapper friezeMapper = new PolygonExtruderMapper (friezeExtrusion);
friezeMapper.Generate ();
LinerScatteringMapper lsmFrieze = new LinerScatteringMapper (friezeMesh);
lsmFrieze.Generate ();
// generate mask
Mesh maskMesh = _mask.GetComponent<MeshFilter> ().mesh;
PolygonExtruder maskExtrusion = new PolygonExtruder (_transformedPolygon, maskMesh, -0.10f, false, false, true);
maskExtrusion.Generate ();
PolygonExtruderMapper maskMapper = new PolygonExtruderMapper (maskExtrusion);
maskMapper.Generate ();
// generate collision mesh
Mesh collisionMesh = new Mesh ();
collisionMesh.name = "collision";
Polygon collisionPoly = PolygonOperation.GetOutlinedPolygon (_transformedPolygon, 0.33f);
PolygonExtruder collisionExtruder = new PolygonExtruder(collisionPoly, collisionMesh, 0.07f, true, false, false);
collisionExtruder.Generate ();
_meshCollider.sharedMesh = collisionMesh;
_meshCollider.convex = true;
collisionMesh.RecalculateBounds ();
// on ajoute le mesh de collision au renderer parent de la margelle
// pour le calcul de la boundingBox lié a la fonction de redimensionnement
// de la plage.
_rim.gameObject.GetComponent<MeshFilter> ().mesh = collisionMesh;
}