// ValidateDataModel - This sample is hard-wired to a particular version of the Naperville data model.
// This routine checks to make sure we are using the correct one
private bool ValidateDataModel(UtilityNetwork utilityNetwork)
{
bool dataModelIsValid = false;
try
{
using (UtilityNetworkDefinition utilityNetworkDefinition = utilityNetwork.GetDefinition())
using (NetworkSource transformerBankNetworkSource = GetNetworkSource(utilityNetworkDefinition, AssemblyNetworkSourceName))
using (AssetGroup transformerBankAssetGroup = transformerBankNetworkSource.GetAssetGroup(TransformerBankAssetGroupName))
using (AssetType transformerBankAssetType = transformerBankAssetGroup.GetAssetType(TransformerBankAssetTypeName))
// Transformer
using (NetworkSource deviceNetworkSource = GetNetworkSource(utilityNetworkDefinition, DeviceNetworkSourceName))
using (AssetGroup transformerAssetGroup = deviceNetworkSource.GetAssetGroup(TransformerAssetGroupName))
using (AssetType transformerAssetType = transformerAssetGroup.GetAssetType(TransformerAssetTypeName))
// Arrester
using (AssetGroup arresterAssetGroup = deviceNetworkSource.GetAssetGroup(ArresterAssetGroupName))
using (AssetType arresterAssetType = arresterAssetGroup.GetAssetType(ArresterAssetTypeName))
// Fuse
using (AssetGroup fuseAssetGroup = deviceNetworkSource.GetAssetGroup(FuseAssetGroupName))
using (AssetType fuseAssetType = fuseAssetGroup.GetAssetType(FuseAssetTypeName))
{
// Find the upstream terminal on the transformer
TerminalConfiguration terminalConfiguration = transformerAssetType.GetTerminalConfiguration();
Terminal upstreamTerminal = null;
foreach (Terminal terminal in terminalConfiguration.Terminals)
{
if (terminal.IsUpstreamTerminal)
{
upstreamTerminal = terminal;
break;
}
}
// Find the terminal on the fuse
Terminal fuseTerminal = fuseAssetType.GetTerminalConfiguration().Terminals[0];
// Find the terminal on the arrester
Terminal arresterTerminal = arresterAssetType.GetTerminalConfiguration().Terminals[0];
// All of our asset groups and asset types exist. Now we have to check for rules.
IReadOnlyList <Rule> rules = utilityNetworkDefinition.GetRules();
if (ContainmentRuleExists(rules, transformerBankAssetType, transformerAssetType) &&
ContainmentRuleExists(rules, transformerBankAssetType, fuseAssetType) &&
ContainmentRuleExists(rules, transformerBankAssetType, arresterAssetType) &&
ConnectivityRuleExists(rules, transformerAssetType, upstreamTerminal, fuseAssetType, fuseTerminal) &&
ConnectivityRuleExists(rules, fuseAssetType, fuseTerminal, arresterAssetType, arresterTerminal))
{
dataModelIsValid = true;
}
}
}
catch { }
return(dataModelIsValid);
}
/// <summary>
/// This routine takes a row from the starting (or barrier) point table and converts it to a [Network] Element that we can use for tracing
/// </summary>
/// <param name="pointRow">The Row (either starting point or barrier point)</param>
/// <param name="utilityNetwork">Utility Network to be used</param>
/// <param name="definition">Utility Network definition to be used</param>
/// <returns>newly created element</returns>
private static Element GetElementFromPointRow(Row pointRow,
UtilityNetwork utilityNetwork, UtilityNetworkDefinition definition)
{
// Fetch the SourceID, AssetGroupCode, AssetType, GlobalID, and TerminalID values from the starting point row
int sourceID = (int)pointRow[PointsSourceIDFieldName];
int assetGroupID = (int)pointRow[PointsAssetGroupFieldName];
int assetTypeID = (int)pointRow[PointsAssetTypeFieldName];
Guid globalID = new Guid(pointRow[PointsGlobalIDFieldName].ToString());
int terminalID = (int)pointRow[PointsTerminalFieldName];
double percentAlong = (double)pointRow[PointsPercentAlong];
// Fetch the NetworkSource, AssetGroup, and AssetType objects
NetworkSource networkSource = definition.GetNetworkSources().First(x => x.ID == sourceID);
AssetGroup assetGroup = networkSource.GetAssetGroups().First(x => x.Code == assetGroupID);
AssetType assetType = assetGroup.GetAssetTypes().First(x => x.Code == assetTypeID);
// Fetch the Terminal object from the ID
Terminal terminal = null;
if (assetType.IsTerminalConfigurationSupported())
{
TerminalConfiguration terminalConfiguration = assetType.GetTerminalConfiguration();
terminal = terminalConfiguration.Terminals.First(x => x.ID == terminalID);
}
// Create and return a FeatureElement object
// If we have an edge, set the PercentAlongEdge property; otherwise set the Terminal property
if (networkSource.Type == SourceType.Edge)
{
Element element = utilityNetwork.CreateElement(assetType, globalID);
element.PercentAlongEdge = percentAlong;
return(element);
}
else
{
Element element = utilityNetwork.CreateElement(assetType, globalID, terminal);
return(element);
}
}
/// <summary>
/// GetNetworkElementFromStartingPoint
///
/// This routine takes a row from the starting point table and converts it to a NetworkElement that we can use for tracing
///
/// </summary>
///
private Element GetElementFromStartingPointRow(Row startingPointRow, UtilityNetwork utilityNetwork, UtilityNetworkDefinition definition)
{
// Fetch the SourceID, AssetGroupCode, AssetType, GlobalID, and TerminalID values from the starting point row
object vSourceID = startingPointRow[StartingPointsSourceIDFieldName];
int sourceID = (int)vSourceID;
object vAssetGroupID = startingPointRow[StartingPointsAssetGroupFieldName];
int assetGroupID = (int)vAssetGroupID;
object vAssetTypeID = startingPointRow[StartingPointsAssetTypeFieldName];
int assetTypeID = (int)vAssetTypeID;
object vGlobalID = startingPointRow[StartingPointsGlobalIDFieldName];
Guid globalID = new Guid(vGlobalID.ToString());
object vTerminalID = startingPointRow[StartingPointsTerminalFieldName];
int terminalID = (int)vTerminalID;
// Fetch the NetworkSource, AssetGroup, and AssetType objects
NetworkSource networkSource = definition.GetNetworkSources().First(x => x.ID == sourceID);
AssetGroup assetGroup = networkSource.GetAssetGroups().First(x => x.Code == assetGroupID);
AssetType assetType = assetGroup.GetAssetTypes().First(x => x.Code == assetTypeID);
// Fetch the Terminal object from the ID
Terminal terminal = null;
if (assetType.IsTerminalConfigurationSupported())
{
TerminalConfiguration terminalConfiguration = assetType.GetTerminalConfiguration();
terminal = terminalConfiguration.Terminals.First(x => x.ID == terminalID);
}
// Create and return a Element object
return(utilityNetwork.CreateElement(assetType, globalID, terminal));
}
private static void ExecuteTrace(Guid traceStartGuid, string geodatabasePath)
{
using (Geodatabase geodatabase = new Geodatabase(new FileGeodatabaseConnectionPath(new Uri(geodatabasePath))))
{
IReadOnlyList <UtilityNetworkDefinition> utilityNetworkDefinitions = geodatabase.GetDefinitions <UtilityNetworkDefinition>();
string utilityNetworkName = string.Empty;
if (utilityNetworkDefinitions.Count < 0 || utilityNetworkDefinitions.Count > 1)
{
return;
}
// Get utility network name from the dataset
foreach (UtilityNetworkDefinition definition in utilityNetworkDefinitions)
{
utilityNetworkName = definition.GetName();
Console.WriteLine($"Utility network name: {utilityNetworkName}");
definition.Dispose();
}
// Open utility network
using (UtilityNetwork utilityNetwork = geodatabase.OpenDataset <UtilityNetwork>(utilityNetworkName))
using (UtilityNetworkDefinition utilityNetworkDefinition = utilityNetwork.GetDefinition())
{
using (NetworkSource networkSource = utilityNetworkDefinition.GetNetworkSource("ElectricDevice"))
using (AssetGroup assetGroup = networkSource.GetAssetGroup("Medium Voltage Transformer"))
using (AssetType assetType = assetGroup.GetAssetType("Overhead Single Phase"))
{
DomainNetwork domainNetwork = utilityNetworkDefinition.GetDomainNetwork("Electric");
Tier sourceTier = domainNetwork.GetTier("Electric Distribution");
TraceConfiguration traceConfiguration = sourceTier.GetTraceConfiguration();
// Get downstream side of the terminal
Terminal terminal = null;
if (assetType.IsTerminalConfigurationSupported())
{
TerminalConfiguration terminalConfiguration = assetType.GetTerminalConfiguration();
IReadOnlyList <Terminal> terminals = terminalConfiguration.Terminals;
terminal = terminals.First(t => !t.IsUpstreamTerminal);
}
// Create an element to begin a trace
Element startingPointElement = utilityNetwork.CreateElement(assetType, traceStartGuid, terminal);
List <Element> startingPoints = new List <Element>();
startingPoints.Add(startingPointElement);
// Get trace manager
using (TraceManager traceManager = utilityNetwork.GetTraceManager())
{
// Set trace configurations
TraceArgument traceArgument = new TraceArgument(startingPoints);
traceArgument.Configuration = traceConfiguration;
// Get downstream tracer
Tracer tracer = traceManager.GetTracer <DownstreamTracer>();
// Execuate downstream trace
IReadOnlyList <Result> traceResults = tracer.Trace(traceArgument);
// Display trace results in console
foreach (Result result in traceResults)
{
if (result is ElementResult)
{
ElementResult elementResult = result as ElementResult;
IReadOnlyList <Element> elements = elementResult.Elements;
Console.WriteLine("Trace result elements:");
foreach (Element element in elements)
{
Console.WriteLine($"\t OID: {element.ObjectID}, Name:{element.AssetType.Name}");
}
}
else if (result is FunctionOutputResult)
{
FunctionOutputResult functionResult = result as FunctionOutputResult;
IReadOnlyList <FunctionOutput> functionOutputs = functionResult.FunctionOutputs;
Console.WriteLine("Trace result function outputs:");
foreach (FunctionOutput functionOut in functionOutputs)
{
Console.WriteLine($"\t Function result:{functionOut.Value}, name: {functionOut.Function}");
}
}
else if (result is AggregatedGeometryResult)
{
AggregatedGeometryResult aggResults = result as AggregatedGeometryResult;
Polyline aggregatedLine = aggResults.Line as Polyline;
Multipoint aggregatedPoint = aggResults.Point as Multipoint;
Polygon aggregatedPolygon = aggResults.Polygon as Polygon;
}
}
}
}
}
}
}
/// <summary>
/// Called when the sketch finishes. This is where we will create the sketch operation and then execute it.
/// </summary>
/// <param name="geometry">The geometry created by the sketch.</param>
/// <returns>A Task returning a Boolean indicating if the sketch complete event was successfully handled.</returns>
protected override async Task <bool> OnSketchCompleteAsync(Geometry geometry)
{
if (geometry == null)
{
return(false);
}
// Create an edit operation
var createOperation = new EditOperation();
createOperation.Name = "Create Transformer Bank";
createOperation.SelectNewFeatures = true;
bool success = false;
string errorMessage = "";
await QueuedTask.Run(() =>
{
Map map = GetMap();
using (UtilityNetwork utilityNetwork = GetUtilityNetwork())
{
if (utilityNetwork == null)
{
errorMessage = "Please select a layer that participates in a utility network.";
}
else
{
using (UtilityNetworkDefinition utilityNetworkDefinition = utilityNetwork.GetDefinition())
// Get the NetworkSource, AssetGroup, and AssetTypes for all of the features we want to create
// If this was production code, you would want to check the return values to make sure that these asset groups and asset types existed.
// TransformerBank
using (NetworkSource transformerBankNetworkSource = utilityNetworkDefinition.GetNetworkSource(AssemblyNetworkSourceName))
using (AssetGroup transformerBankAssetGroup = transformerBankNetworkSource.GetAssetGroup(TransformerBankAssetGroupName))
using (AssetType transformerBankAssetType = transformerBankAssetGroup.GetAssetType(TransformerBankAssetTypeName))
// Transformer
using (NetworkSource deviceNetworkSource = utilityNetworkDefinition.GetNetworkSource(DeviceNetworkSourceName))
using (AssetGroup transformerAssetGroup = deviceNetworkSource.GetAssetGroup(TransformerAssetGroupName))
using (AssetType transformerAssetType = transformerAssetGroup.GetAssetType(TransformerAssetTypeName))
// Arrester
using (AssetGroup arresterAssetGroup = deviceNetworkSource.GetAssetGroup(ArresterAssetGroupName))
using (AssetType arresterAssetType = arresterAssetGroup.GetAssetType(ArresterAssetTypeName))
// Fuse
using (AssetGroup fuseAssetGroup = deviceNetworkSource.GetAssetGroup(FuseAssetGroupName))
using (AssetType fuseAssetType = fuseAssetGroup.GetAssetType(FuseAssetTypeName))
{
MapPoint clickPoint = geometry as MapPoint;
// Create a transformer bank
Layer transformerBankLayer = GetLayerForEdit(map, AssemblyNetworkSourceName, TransformerBankAssetGroupName);
RowToken token = createOperation.CreateEx(transformerBankLayer, CreateAttributes(transformerBankAssetGroup, transformerBankAssetType, clickPoint));
RowHandle transformerBankHandle = new RowHandle(token);
// Create three transformers, one for each phase
Layer transformerLayer = GetLayerForEdit(map, DeviceNetworkSourceName, TransformerAssetGroupName);
MapPoint transformerPointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, YOffset);
token = createOperation.CreateEx(transformerLayer, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointA, APhase));
RowHandle transformerHandleA = new RowHandle(token);
MapPoint transformerPointB = CreateOffsetMapPoint(clickPoint, 0, YOffset);
token = createOperation.CreateEx(transformerLayer, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointB, BPhase));
RowHandle transformerHandleB = new RowHandle(token);
MapPoint transformerPointC = CreateOffsetMapPoint(clickPoint, XOffset, YOffset);
token = createOperation.CreateEx(transformerLayer, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointC, CPhase));
RowHandle transformerHandleC = new RowHandle(token);
// Create containment associations between the bank and the transformers
ContainmentAssociationDescription containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, transformerHandleA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, transformerHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, transformerHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Create three arresters, one for each phase
Layer arresterLayer = GetLayerForEdit(map, DeviceNetworkSourceName, ArresterAssetGroupName);
MapPoint arresterPointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, 2 * YOffset);
token = createOperation.CreateEx(arresterLayer, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointA, APhase));
RowHandle arresterHandlA = new RowHandle(token);
MapPoint arresterPointB = CreateOffsetMapPoint(clickPoint, 0, 2 * YOffset);
token = createOperation.CreateEx(arresterLayer, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointB, BPhase));
RowHandle arresterHandleB = new RowHandle(token);
MapPoint arresterPointC = CreateOffsetMapPoint(clickPoint, XOffset, 2 * YOffset);
token = createOperation.CreateEx(arresterLayer, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointC, CPhase));
RowHandle arresterHandleC = new RowHandle(token);
// Create containment associations between the bank and the arresters
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, arresterHandlA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, arresterHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, arresterHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Find the high-side terminal for transformers
TerminalConfiguration transformerTerminalConfiguration = transformerAssetType.GetTerminalConfiguration();
IReadOnlyList <Terminal> terminals = transformerTerminalConfiguration.Terminals;
Terminal highSideTerminal = terminals.First(x => x.IsUpstreamTerminal == true);
long highSideTerminalID = highSideTerminal.ID;
// Connect the high-side transformer terminals to the arresters (connect the A-phase transformer to the A-phase arrester, and so on)
ConnectivityAssociationDescription connectivityAssociationDescription = new ConnectivityAssociationDescription(transformerHandleA, highSideTerminalID, arresterHandlA);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new ConnectivityAssociationDescription(transformerHandleB, highSideTerminalID, arresterHandleB);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new ConnectivityAssociationDescription(transformerHandleC, highSideTerminalID, arresterHandleC);
createOperation.Create(connectivityAssociationDescription);
// Create three fuses, one for each phase
Layer fuseLayer = GetLayerForEdit(map, DeviceNetworkSourceName, FuseAssetGroupName);
MapPoint fusePointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, 3 * YOffset);
token = createOperation.CreateEx(fuseLayer, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointA, APhase));
RowHandle fuseHandleA = new RowHandle(token);
MapPoint fusePointB = CreateOffsetMapPoint(clickPoint, 0, 3 * YOffset);
token = createOperation.CreateEx(fuseLayer, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointB, BPhase));
RowHandle fuseHandleB = new RowHandle(token);
MapPoint fusePointC = CreateOffsetMapPoint(clickPoint, XOffset, 3 * YOffset);
token = createOperation.CreateEx(fuseLayer, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointC, CPhase));
RowHandle fuseHandleC = new RowHandle(token);
// Create containment associations between the bank and the fuses
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, fuseHandleA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, fuseHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new ContainmentAssociationDescription(transformerBankHandle, fuseHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Create connectivity associations between the fuses and the arresters (connect the A-phase fuse the A-phase arrester, and so on)
connectivityAssociationDescription = new ConnectivityAssociationDescription(fuseHandleA, arresterHandlA);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new ConnectivityAssociationDescription(fuseHandleB, arresterHandleB);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new ConnectivityAssociationDescription(fuseHandleC, arresterHandleC);
createOperation.Create(connectivityAssociationDescription);
// Execute the edit operation, which creates all of the rows and associations
success = createOperation.Execute();
if (!success)
{
errorMessage = createOperation.ErrorMessage;
}
}
}
}
});
if (!success)
{
MessageBox.Show(errorMessage, "Create Transformer Bank Tool");
}
return(success);
}
/// <summary>
/// Called when the sketch finishes. This is where we will create the sketch operation and then execute it.
/// </summary>
/// <param name="geometry">The geometry created by the sketch.</param>
/// <returns>A Task returning a Boolean indicating if the sketch complete event was successfully handled.</returns>
protected override async Task <bool> OnSketchCompleteAsync(Geometry geometry)
{
if (geometry == null)
{
return(false);
}
// Create an edit operation
var createOperation = new EditOperation()
{
Name = "Create Transformer Bank",
SelectNewFeatures = true
};
bool success = false;
string errorMessage = "";
await QueuedTask.Run(() =>
{
Map map = GetMap();
using (UtilityNetwork utilityNetwork = GetUtilityNetwork())
{
if (utilityNetwork == null)
{
errorMessage = "Please select a layer that participates in a utility network.";
}
else
{
if (!ValidateDataModel(utilityNetwork))
{
errorMessage = "This sample is designed for a different utility network data model";
}
else
{
using (UtilityNetworkDefinition utilityNetworkDefinition = utilityNetwork.GetDefinition())
// Get the NetworkSource, FeatureClass, AssetGroup, and AssetTypes for all of the features we want to create
// The existence of these values has already been confirmed in the ValidateDataModel() routine
// TransformerBank
using (NetworkSource transformerBankNetworkSource = GetNetworkSource(utilityNetworkDefinition, AssemblyNetworkSourceName))
using (FeatureClass transformerBankFeatureClass = utilityNetwork.GetTable(transformerBankNetworkSource) as FeatureClass)
using (AssetGroup transformerBankAssetGroup = transformerBankNetworkSource.GetAssetGroup(TransformerBankAssetGroupName))
using (AssetType transformerBankAssetType = transformerBankAssetGroup.GetAssetType(TransformerBankAssetTypeName))
// Transformer
using (NetworkSource deviceNetworkSource = GetNetworkSource(utilityNetworkDefinition, DeviceNetworkSourceName))
using (FeatureClass deviceFeatureClass = utilityNetwork.GetTable(deviceNetworkSource) as FeatureClass)
using (AssetGroup transformerAssetGroup = deviceNetworkSource.GetAssetGroup(TransformerAssetGroupName))
using (AssetType transformerAssetType = transformerAssetGroup.GetAssetType(TransformerAssetTypeName))
// Arrester
using (AssetGroup arresterAssetGroup = deviceNetworkSource.GetAssetGroup(ArresterAssetGroupName))
using (AssetType arresterAssetType = arresterAssetGroup.GetAssetType(ArresterAssetTypeName))
// Fuse
using (AssetGroup fuseAssetGroup = deviceNetworkSource.GetAssetGroup(FuseAssetGroupName))
using (AssetType fuseAssetType = fuseAssetGroup.GetAssetType(FuseAssetTypeName))
{
MapPoint clickPoint = geometry as MapPoint;
// Create a transformer bank
RowToken token = createOperation.CreateEx(transformerBankFeatureClass, CreateAttributes(transformerBankAssetGroup, transformerBankAssetType, clickPoint));
RowHandle transformerBankHandle = new RowHandle(token);
// Create three transformers, one for each phase
MapPoint transformerPointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointA, APhase));
RowHandle transformerHandleA = new RowHandle(token);
MapPoint transformerPointB = CreateOffsetMapPoint(clickPoint, 0, YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointB, BPhase));
RowHandle transformerHandleB = new RowHandle(token);
MapPoint transformerPointC = CreateOffsetMapPoint(clickPoint, XOffset, YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(transformerAssetGroup, transformerAssetType, transformerPointC, CPhase));
RowHandle transformerHandleC = new RowHandle(token);
// Create containment associations between the bank and the transformers
AssociationDescription containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, transformerHandleA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, transformerHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, transformerHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Find the high-side terminal for transformers
TerminalConfiguration transformerTerminalConfiguration = transformerAssetType.GetTerminalConfiguration();
IReadOnlyList <Terminal> terminals = transformerTerminalConfiguration.Terminals;
Terminal highSideTerminal = terminals.First(x => x.IsUpstreamTerminal == true);
long highSideTerminalID = highSideTerminal.ID;
// Create three fuses, one for each phase
MapPoint fusePointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, 2 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointA, APhase));
RowHandle fuseHandleA = new RowHandle(token);
MapPoint fusePointB = CreateOffsetMapPoint(clickPoint, 0, 2 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointB, BPhase));
RowHandle fuseHandleB = new RowHandle(token);
MapPoint fusePointC = CreateOffsetMapPoint(clickPoint, XOffset, 2 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(fuseAssetGroup, fuseAssetType, fusePointC, CPhase));
RowHandle fuseHandleC = new RowHandle(token);
// Create containment associations between the bank and the fuses
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, fuseHandleA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, fuseHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, fuseHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Connect the high-side transformer terminals to the fuses (connect the A-phase transformer to the A-phase fuse, and so on)
AssociationDescription connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, transformerHandleA, highSideTerminalID, fuseHandleA);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, transformerHandleB, highSideTerminalID, fuseHandleB);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, transformerHandleC, highSideTerminalID, fuseHandleC);
createOperation.Create(connectivityAssociationDescription);
// Create three arresters, one for each phase
MapPoint arresterPointA = CreateOffsetMapPoint(clickPoint, -1 * XOffset, 3 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointA, APhase));
RowHandle arresterHandleA = new RowHandle(token);
MapPoint arresterPointB = CreateOffsetMapPoint(clickPoint, 0, 3 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointB, BPhase));
RowHandle arresterHandleB = new RowHandle(token);
MapPoint arresterPointC = CreateOffsetMapPoint(clickPoint, XOffset, 3 * YOffset);
token = createOperation.CreateEx(deviceFeatureClass, CreateDeviceAttributes(arresterAssetGroup, arresterAssetType, arresterPointC, CPhase));
RowHandle arresterHandleC = new RowHandle(token);
// Create containment associations between the bank and the arresters
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, arresterHandleA, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, arresterHandleB, false);
createOperation.Create(containmentAssociationDescription);
containmentAssociationDescription = new AssociationDescription(AssociationType.Containment, transformerBankHandle, arresterHandleC, false);
createOperation.Create(containmentAssociationDescription);
// Create connectivity associations between the fuses and the arresters (connect the A-phase fuse the A-phase arrester, and so on)
connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, fuseHandleA, arresterHandleA);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, fuseHandleB, arresterHandleB);
createOperation.Create(connectivityAssociationDescription);
connectivityAssociationDescription = new AssociationDescription(AssociationType.JunctionJunctionConnectivity, fuseHandleC, arresterHandleC);
createOperation.Create(connectivityAssociationDescription);
// Execute the edit operation, which creates all of the rows and associations
success = createOperation.Execute();
if (!success)
{
errorMessage = createOperation.ErrorMessage;
}
}
}
}
}
});
if (!success)
{
MessageBox.Show(errorMessage, "Create Transformer Bank Tool");
}
return(success);
}
/// <summary>
/// Fill the dictionary with Element Id, Properties
/// </summary>
/// <param name="Diagram">Network Diagram</param>
/// <param name="theSources">List of network sources</param>
/// <param name="SourceID">Source Id</param>
/// <param name="IsEdge">Flag for edges treatement</param>
/// <returns>Dictionary</returns>
private static Dictionary <int, Dictionary <string, string> > FillSources(NetworkDiagram Diagram, IReadOnlyList <NetworkSource> theSources, int SourceID, bool IsEdge = false)
{
Dictionary <int, Dictionary <string, string> > AttributesByEID = new Dictionary <int, Dictionary <string, string> >();
NetworkSource source = theSources.FirstOrDefault(a => a.ID == SourceID);
if (source != null)
{
string[] attributeNames;
if (IsEdge)
{
attributeNames = new string[4] {
"Asset group", "Asset type", "Strand Group Color", "Strand Color"
}
}
;
else
{
attributeNames = new string[2] {
"Asset group", "Asset type"
}
};
string content = Diagram.GetSourceAttributeValues(attributeNames: attributeNames, sourceName: source.Name, useCodedValueNames: true);
JObject attributesList = JObject.Parse(content);
JToken elements;
if (IsEdge)
{
elements = attributesList["edges"];
if (!(elements == null || !elements.Any()))
{
foreach (var element in elements)
{
int id = (int)element["id"];
if (!AttributesByEID.TryGetValue(id, out Dictionary <string, string> IdProperties))
{
IdProperties = new Dictionary <string, string>();
AttributesByEID.Add(id, IdProperties);
}
if (element["attributes"] is JObject attributes)
{
IdProperties.Add("Asset group", attributes["Asset group"].ToString());
IdProperties.Add("Asset type", attributes["Asset type"].ToString());
IdProperties.Add("Strand Group Color", attributes["Strand Group Color"].ToString());
IdProperties.Add("Strand Color", attributes["Strand Color"].ToString());
}
}
}
}
else
{
elements = attributesList["containers"];
if (!(elements == null || !elements.Any()))
{
foreach (var element in elements)
{
int id = (int)element["id"];
if (!AttributesByEID.TryGetValue(id, out Dictionary <string, string> IdProperties))
{
IdProperties = new Dictionary <string, string>();
AttributesByEID.Add(id, IdProperties);
}
if (element["attributes"] is JObject attributes)
{
IdProperties.Add("Asset group", attributes["Asset group"].ToString());
IdProperties.Add("Asset type", attributes["Asset type"].ToString());
}
}
}
elements = attributesList["junctions"];
if (!(elements == null || !elements.Any()))
{
foreach (var element in elements)
{
int id = (int)element["id"];
if (!AttributesByEID.TryGetValue(id, out Dictionary <string, string> IdProperties))
{
IdProperties = new Dictionary <string, string>();
AttributesByEID.Add(id, IdProperties);
}
if (element["attributes"] is JObject attributes)
{
IdProperties.Add("Asset group", attributes["Asset group"].ToString());
IdProperties.Add("Asset type", attributes["Asset type"].ToString());
}
}
}
}
}
return(AttributesByEID);
}