/// <summary>
/// 停止服务
/// </summary>
public override void StopService()
{
if (serviceHost != null)
{
NLog.Logger log = NLog.LogManager.GetCurrentClassLogger();
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
CgwService.Instance().StopAllStream();//stop all stream.
SmcErr err = CgwService.Instance().DisconnectMonitor();
logEx.Info("CGW service.StopService DisconnectMonitor.ErrNo ={0}!", err.ErrNo);
serviceHost.Close();
logEx.Info("CGW service.StopService Close Success.");
}
}
/// <summary>
/// PTZ(Pan/Tilt/Zoom)控制，该接口需要在预览模式下使用
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommandType">命令类型</param>
/// <param name="param">命令参数</param>
/// <returns>返回错误码</returns>
public SmcErr StartControlPtz(string cameraNo, PtzCommandType ptzCommandType, int param)
{
SmcErr err = new CgwError();
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
err = CheckSession(currentSessionID);
//调任何接口前 需要判断监控平台是否加载成功
if (err.IsSuccess())
{
err = VideoMonitorManage.Instance().StartControlPtz(cameraNo, ptzCommandType, param);
}
if (err.IsSuccess())
{
logEx.Info("MonitorManageService StartControlPtz Successful,Current Cgw IP is : {0}", CgwConst.ClientIp);
}
else
{
logEx.Error("MonitorManageService StartControlPtz failed,ErrNo :{0}", err.ErrNo);
}
return(err);
}
/// <summary>
/// 关闭PTZ操作
/// </summary>
/// <param name="Camerano">摄像头</param>
/// <returns></returns>
public Cgw.SmcError.SmcErr StopControlPtz(string cameraNo, Common.PtzCommandType ptzCommandType)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: CgwMonitorManageAdapter.StopControlPtz");
Cgw.SmcError.SmcErr err = new Cgw.SmcError.SmcErr();
try
{
//if (serviceControl.MonitorServiceRun() && client.State == CommunicationState.Opened)
if (serviceControl.MonitorServiceRun())
{
client = new MonitorManageServiceClient();
CgwMonitorManageServiceReference.PtzCommandType ptzCommand = (CgwMonitorManageServiceReference.PtzCommandType)ptzCommandType; //将平台的枚举转换成服务中的枚举
CgwMonitorManageServiceReference.SmcErr serviceErr = client.StopControlPtz(cameraNo, ptzCommand);
client.Close();
if (serviceErr.ErrNo != Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_SUCCESS)
{
logEx.Error("Stop control ptz failed.Camera no:{0},ptzCommandType:{1},Error Code:{2} ", cameraNo, ptzCommand, err.ErrNo);
err = SetCgwErrNo(serviceErr);
}
else
{
logEx.Info("Stop control ptz success.Camera no:{0},ptzCommandType:{1}.", cameraNo, ptzCommand);
}
}
else
{
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
}
}
catch (System.Exception ex)
{
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
logEx.Error("CgwMonitorManageServiceReference.StopControlPtz failed. Exception is {0} ", ex.ToString());
}
return(err);
}
/// <summary>
/// 刷新监控摄像头列表
/// </summary>
/// <returns></returns>
public SmcErr RefreshMonitorCamera()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.RefreshMonitorCamera");
SmcErr err = new CgwError();
if (refreshMonitorCameraOperateLock.TryEnterWriteLock(CgwConst.EFRESH_MONITOR_CAMERA_WAIT_TIME))
{
try
{
GetAllCamerasMethod();
//重新开始计时
updateCameraTimer.Stop();
updateCameraTimer.Start();
}
finally
{
refreshMonitorCameraOperateLock.ExitWriteLock();
}
}
logEx.Info("RefreshMonitorCamera success.");
return(err);
}
/// <summary>
/// 刷新监控摄像头列表
/// </summary>
/// <returns></returns>
public SmcErr RefreshMonitorCamera()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: CgwService.RefreshMonitorCamera");
SmcErr err = new CgwError();
err = CheckSession();
if (err.IsSuccess())
{
err = MonitorChannelBll.Instance().RefreshMonitorCamera();
}
if (err.IsSuccess())
{
logEx.Info("SMC RefreshMonitorCamera Successful,Current SMC IP is : {0}", CgwConst.SmcIp);
}
else
{
logEx.Error("SMC RefreshMonitorCamera failed,ErrNo :{0}", err.ErrNo);
}
return(err);
}
/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommand)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
logEx.Trace("Call ivsSdkClient.StopPtzControl({0}).", cameraNo);
int result = this.ivsSdkClient.StopPtzControl(cameraNo);
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Stop control ptz success.Camera No:{0}.", cameraNo);
}
else
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return(err);
}
return(err);
}
/// <summary>
/// 开始云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <param name="param">命令参数（速度、倍数）</param>
/// <returns></returns>
public SmcErr StartControlPtz(string cameraNo, PtzCommandType ptzCommand, int param)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StartControlPtz({0},{1},{2}).", cameraNo, ptzCommand, param);
SmcErr err = new CgwError();
//将ptz命令转换成IVS的命令
string name = Enum.GetName(typeof(PtzCommandType), ptzCommand);
if (Enum.IsDefined(typeof(IvsPtzCommandType), name))
{
IvsPtzCommandType ivsPtzCommandType = (IvsPtzCommandType)Enum.Parse(typeof(IvsPtzCommandType), name);
logEx.Trace("Call ivsSdkClient.StartPtzControl({0},{1},{2}).", cameraNo, (int)ivsPtzCommandType, param);
int result = this.ivsSdkClient.StartPtzControl(cameraNo, (int)ivsPtzCommandType, param.ToString());
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Start control ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("Start control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return(err);
}
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("The ivs monitor is not support the command.ptzCommand:{0}.", ptzCommand);
return(err);
}
return(err);
}
/// <summary>
/// 注销SDK资源
/// </summary>
/// <returns></returns>
public bool Unload()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandySdkClient.Unload().");
try
{
//释放SDK资源
if (client_sdk_cleanup())
{
logEx.Info("Call Tiandy sdk function client_sdk_cleanup success.");
return(true);
}
else
{
logEx.Error("Call Tiandy sdk function client_sdk_cleanup failed.");
return(false);
}
}
catch (Exception e)
{
logEx.Error("Call Tiandy sdk function client_sdk_cleanup failed. Exception message:{0}.", e.Message);
return(false);
}
}
/// <summary>
/// 停止预览
/// </summary>
/// <param name="playfd">设备ID</param>
/// <returns>成功返回0，失败返回错误码</returns>
public bool StopReceiveVideo(int playfd)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandySdkClient.StopReceiveVideo({0}).", playfd);
try
{
//调用SDK接口，停止预览,回调设置为空
client_sdk_set_h264_callback(playfd, null, 0);
if (client_sdk_stop_realplay(playfd))
{
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
this.receiveSuccHandle.Remove(playfd);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
logEx.Info("Call Tiandy sdk function client_sdk_stop_realplay success.playfd:{0}.", playfd);
return(true);
}
else
{
logEx.Error("Call Tiandy sdk function client_sdk_stop_realplay failed. playfd:{0}.", playfd);
return(false);
}
}
catch (Exception e)
{
logEx.Error("Stop Receive camera video data failed.Exception message:{0}.", e.Message);
return(false);
}
}
/// <summary>
/// 获取监控设备列表
/// </summary>
/// <param name="CameraInfoList">摄像头基本信息</param>
/// <param name="CameraGroupList">组基本信息</param>
/// <param name="nodeRelationList">所属分组关系信息</param>
/// <returns></returns>
public SmcErr QueryMonitorCamera(PlatformType platformType, PageParam pageParam, out List <Camera> cameraInfoList, out List <CameraGroup> cameraGroupList, out List <NodeRelation> nodeRelationList, out PagesInfo pagesInfo)
{
SmcErr err = new CgwError();
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
cameraInfoList = null;
cameraGroupList = null;
nodeRelationList = null;
pagesInfo = null;
err = CheckSession();
if (err.IsSuccess())
{
err = MonitorChannelBll.Instance().QueryMonitorCamera(platformType, pageParam, out cameraInfoList, out cameraGroupList, out nodeRelationList, out pagesInfo);
}
if (err.IsSuccess())
{
logEx.Info("SMC QueryMonitorCamera Successful,Current SMC IP is : {0}", CgwConst.SmcIp);
}
else
{
logEx.Error("SMC QueryMonitorCamera failed,ErrNo :{0}", err.ErrNo);
}
return(err);
}
/// <summary>
/// 写日志回调函数
/// </summary>
/// <param name="level"></param>
/// <param name="log"></param>
/// <param name="len"></param>
/// <returns></returns>
private uint WriteLog(NLogLevel level, string log, int len)
{
NLog.Logger sotLog = NLog.LogManager.GetLogger("SoftTerminal");
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(sotLog);
try
{
switch (level)
{
case NLogLevel.Error:
logEx.Error(log);
break;
case NLogLevel.Warn:
logEx.Warn(log);
break;
case NLogLevel.Info:
logEx.Info(log);
break;
case NLogLevel.Trace:
logEx.Trace(log);
break;
default:
break;
}
}
catch (System.Exception ex)
{
logEx.Error(ex, "WriteLog Exception level:{0}, log:{1}.", level, log);
}
return(1);
}
/// <summary>
/// 注销监控平台资源
/// </summary>
/// <returns></returns>
public SmcErr Unload()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Info("Enter: VideoMonitorManage.Unload().");
SmcErr err = new CgwError();
if (this.monitorsOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
foreach (KeyValuePair <string, IVideoMonitor> monitor in monitorsDictionary)
{
IVideoMonitor videoMonitor = monitor.Value;
SmcErr result = videoMonitor.Unload();
if (!result.IsSuccess())
{
logEx.Error("Unload monitor failed.Monitor id:{0} ,Error code:{1}", monitor.Key, result.ErrNo);
//一个失败,记录失败，继续其他平台卸载
err.SetErrorNo(result.ErrNo);
continue;
}
}
monitorsDictionary.Clear();
}
catch (Exception e)
{
logEx.Error("Unload monitor failed..Execption message:{0}", e.Message);
}
finally
{
this.monitorsOperateLock.ExitWriteLock();
}
}
return(err);
}
/// <summary>
/// 设置扬声器
/// </summary>
/// <param name="cameraNo"></param>
/// <param name="isOn"></param>
/// <returns></returns>
public Cgw.SmcError.SmcErr SetSpeaker(string cameraNo, bool isOn)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: CgwMonitorManageAdapter.SetSpeaker");
Cgw.SmcError.SmcErr err = new Cgw.SmcError.SmcErr();
try
{
//if (serviceControl.MonitorServiceRun() && client.State == CommunicationState.Opened)
if (serviceControl.MonitorServiceRun())
{
client = new MonitorManageServiceClient();
CgwMonitorManageServiceReference.SmcErr serviceErr = client.SetSpeaker(cameraNo, isOn);
client.Close();
if (serviceErr.ErrNo == Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_SUCCESS)
{
logEx.Info("Cgw SetSpeaker Successful,Current Cgw IP is : {0}", CgwConst.CGWSERVICE_IP_TAG);
}
else
{
logEx.Error("Cgw SetSpeaker failed,ErrNo :{0}", err.ErrNo);
err = SetCgwErrNo(serviceErr);
}
}
else
{
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
}
}
catch (System.Exception ex)
{
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
logEx.Error("CgwMonitorManageServiceReference.SetSpeaker failed. Exception is {0} ", ex.ToString());
}
return(err);
}
/// <summary>
/// 注销IVS监控平台资源
/// </summary>
/// <returns></returns>
public SmcErr Unload()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Info("Enter: IvsVideoMonitor.Unload().");
SmcErr err = new CgwError();
loadResult = true;
//停止定时器
this.updateCameraTimer.Stop();
logEx.Trace("Call ivsSdkClient.Logout().");
int result = this.ivsSdkClient.Logout();
logEx.Trace("Call ivsSdkClient.Cleanup().");
result = this.ivsSdkClient.Cleanup();
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Unload video monitor success.Monitor id:{0}.", this.monitorId);
}
else
{
err.SetErrorNo(CgwError.MONITOR_UDLOAD_FAILED);
logEx.Error("Unload video monitor failed.Monitor id:{0}.", this.monitorId);
}
return err;
}
/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommand)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
logEx.Trace("Call ivsSdkClient.StopPtzControl({0}).", cameraNo);
int result = this.ivsSdkClient.StopPtzControl(cameraNo);
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Stop control ptz success.Camera No:{0}.", cameraNo);
}
else
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return err;
}
return err;
}
/// <summary>
/// 开始云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <param name="param">命令参数（速度、倍数）</param>
/// <returns></returns>
public SmcErr StartControlPtz(string cameraNo, PtzCommandType ptzCommand, int param)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StartControlPtz({0},{1},{2}).", cameraNo, ptzCommand, param);
SmcErr err = new CgwError();
//将ptz命令转换成IVS的命令
string name = Enum.GetName(typeof(PtzCommandType), ptzCommand);
if (Enum.IsDefined(typeof(IvsPtzCommandType), name))
{
IvsPtzCommandType ivsPtzCommandType = (IvsPtzCommandType)Enum.Parse(typeof(IvsPtzCommandType), name);
logEx.Trace("Call ivsSdkClient.StartPtzControl({0},{1},{2}).", cameraNo, (int)ivsPtzCommandType, param);
int result = this.ivsSdkClient.StartPtzControl(cameraNo, (int)ivsPtzCommandType, param.ToString());
//如果为0，表示成功
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("Start control ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("Start control ptz failed.Camera No:{0}.Ivs sdk error code：{1}.", cameraNo, result);
return err;
}
}
else
{
err.SetErrorNo(CgwError.START_CONTROL_PTZ_FAILED);
logEx.Error("The ivs monitor is not support the command.ptzCommand:{0}.", ptzCommand);
return err;
}
return err;
}
/// <summary>
/// 初始化IVS监控平台
/// </summary>
/// <param name="monitorConfigElement">监控平台配置节点</param>
/// <returns></returns>
public SmcErr Load(XmlElement monitorConfigElement)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Info("Enter: IvsVideoMonitor.Load().");
SmcErr err = new CgwError();
try
{
//解析xml节点，获取所需参数
this.monitorId = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.ID_TAG);
ip = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.IP_TAG);
port = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PORT_TAG);
user = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.USER_TAG);
//password = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PASSWORD_TAG);
pwdByte = CommonFunction.EncryptStr2Byte(CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PASSWORD_TAG),CgwConst.PASSWORD_TAG);
//从配置文件读取的参数要简单判断一下合法性
//初始化之前设置日志路径
logEx.Trace("Call SetLogPath:{0}", ivsLogPath);
this.ivsSdkClient.SetLogPath(ivsLogPath);
logEx.Trace("Call ivsSdkClient.Init().");
//初始化
int result = this.ivsSdkClient.Init();
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.MONITOR_LOAD_FAILED);
logEx.Error("Init ivs monitor failed.Monitor id:{0}.ivs sdk error code:{1}.", this.monitorId, result);
return err;
}
else
{
logEx.Info("Init ivs sdk success.Monitor id:{0}", this.monitorId);
}
//设置监控平台id
this.ivsSdkClient.SetId(this.monitorId);
this.sdkCallbackFunc = IvsRealPlayCallBackRaw;
this.ivsSdkClient.SetRealPlayCBRawCallBackFunc(this.sdkCallbackFunc);
//sdk事件回调
this.ivsEventCallBackFunc = IvsEventCallBackFunc;
this.ivsSdkClient.SetEventCallBackFunc(this.ivsEventCallBackFunc);
IvsLoginInfo loginInfo = new IvsLoginInfo();
loginInfo.Ip = ip;
loginInfo.Port = int.Parse(port);
loginInfo.User = user;
//loginInfo.Pwd = password;
loginInfo.Pwd = CommonFunction.DecryptByte2Str(pwdByte,CgwConst.PASSWORD_TAG);
loadResult = false;
//使用线程轮询加载监控平台
Thread loaderThread = new Thread(LoginThread);
loaderThread.IsBackground = true;
loaderThread.Start(loginInfo);
}
catch (Exception e)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load ivs monitor failed.Execption message:{0}.", e.Message);
return err;
}
logEx.Info("Load video monitor success.Monitor id:{0}.", this.monitorId);
return err;
}
/// <summary>
/// 设置实况rtp数据包回调
/// </summary>
/// <param name="dataCallBack"></param>
public void SetNetDataCallBack(NET_DATA_CALLBACK dataCallBack, NET_EXCEPTION_CALLBACK netExceptionCallBack)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.SetNetDataCallBack().");
cbDataCallBack = dataCallBack;
cbNetExceptionCallBack = netExceptionCallBack;
logEx.Info("Set SetNetDataCallBack success");
}
/// <summary>
/// 刷新监控摄像头列表
/// </summary>
/// <returns></returns>
public SmcErr RefreshMonitorCamera()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.RefreshMonitorCamera");
SmcErr err = new CgwError();
if (refreshMonitorCameraOperateLock.TryEnterWriteLock(CgwConst.EFRESH_MONITOR_CAMERA_WAIT_TIME))
{
try
{
GetAllCamerasMethod();
//重新开始计时
updateCameraTimer.Stop();
updateCameraTimer.Start();
}
finally
{
refreshMonitorCameraOperateLock.ExitWriteLock();
}
}
logEx.Info("RefreshMonitorCamera success.");
return err;
}
/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommand)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
int handel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
handel = this.cameraVideoHandeDic[cameraNo];
}
else
{
logEx.Warn("The camera was not Preview.Don't need to end the control.Camera No:{0}.", cameraNo);
}
}
finally
{
this.handelOperateLock.ExitReadLock();
}
}
if (handel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
Client_PTZ_Command client_ptz_command = new Client_PTZ_Command();
client_ptz_command.start = false;
//将ptz命令转换成天地伟业的命令
string name = Enum.GetName(typeof(PtzCommandType), ptzCommand);
if (Enum.IsDefined(typeof(TiandyPtzCommandType), name))
{
TiandyPtzCommandType tiandyPtzCommandType = (TiandyPtzCommandType)Enum.Parse(typeof(TiandyPtzCommandType), name);
client_ptz_command.cmd = (int)tiandyPtzCommandType;
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("The tiandy monitor is not support the command.ptzCommand:{0}.", ptzCommand);
return(err);
}
bool result = this.sdkClient.ControlPtz(handel, client_ptz_command);
if (result)
{
logEx.Info("Stop control camera ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control camera ptz failed.Camera No:{0}.", cameraNo);
}
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Handel is not found. Stop control camera ptz failed. Camera No:{0}.", cameraNo);
return(err);
}
return(err);
}
/// <summary>
/// 启动摄像头预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns></returns>
public SmcErr StartReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.StartReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
TiandyCamera camera = null;
Host host = null;
//摄像头所连接的流媒体服务器
MediaServer cameraMediaServer = null;
if (this.cameraOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (!this.tiandyCameraDictionary.ContainsKey(cameraNo))
{
err.SetErrorNo(CgwError.CAMERA_NOT_FOUND);
logEx.Error("Start Receive camera video data failed.Camera No is not found.Camera No:{0}", cameraNo);
return(err);
}
camera = this.tiandyCameraDictionary[cameraNo];
host = this.hostDictionary[camera.HostNo];
cameraMediaServer = this.mediaServerDictionary[host.MediaServerNo];
}
catch (Exception e)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0},Execption message:{1}", cameraNo, e.Message);
return(err);
}
finally
{
this.cameraOperateLock.ExitReadLock();
}
}
if (camera == null)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No is not found.Camera No:{0}", cameraNo);
return(err);
}
RealPlayInfo real = new RealPlayInfo();
real.ch = camera.Channel;
real.data_type = (int)TiandyDateType.PRIMARY;
real.hPlayWnd = null;
int result = this.sdkClient.StartReceiveVideo(host.No, cameraMediaServer, ref real);
//如果为负数，表示预览失败
if (result < 0)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0}.", cameraNo);
return(err);
}
else
{
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
//如果预览句柄已经存在，删除掉原来的句柄,用新的句柄替换
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
this.cameraVideoHandeDic.Add(cameraNo, result);
this.videoHandleCameraDic.Add(result, cameraNo);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
logEx.Info("Start Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, result);
//重新预览后，更新了预览句柄，需要将原来的预览停止，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
this.sdkClient.StopReceiveVideo(needToStopHandel);
}
}
return(err);
}
/// <summary>
/// 获取本机ip
/// </summary>
/// <returns></returns>
private string GetLocalIP(string serverIP, int serverPort, int localPort)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.GetLocalIP().");
try
{
IPAddress serverAddress = IPAddress.Parse(serverIP);
IPAddress[] arrIPAddresses = Dns.GetHostAddresses(System.Environment.MachineName);
foreach (IPAddress ip in arrIPAddresses)
{
//如果serverIP为IPv4
if (serverAddress.AddressFamily.Equals(AddressFamily.InterNetwork) && ip.AddressFamily.Equals(serverAddress.AddressFamily))
{
#region IPv4
IPEndPoint serverEndpoint = new IPEndPoint(serverAddress, serverPort);
Socket socketClient = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
IPEndPoint clientEndpoint = new IPEndPoint(ip, localPort);
socketClient.Bind(clientEndpoint);
try
{
socketClient.Connect(serverEndpoint);
if (socketClient.Connected)
{
logEx.Trace("SipStackAdapter.try GetLocalIP ={0}.", ip.ToString());
return ip.ToString();
}
}
catch (SocketException e)
{
//logEx.Warn("SipStackAdapter.GetLocalIP failed,e.ErrorCode:{0}", e.ErrorCode);
if (e.ErrorCode == 10061 || e.ErrorCode == 10048) //Even No connection could be made because the target machine actively refused it ,but IP is valid.
{
logEx.Trace("SipStackAdapter.catch GetLocalIP ={0}.", ip.ToString());
return ip.ToString();
}
logEx.Error("SipStackAdapter.GetLocalIP failed.catch Execption message:{0}", e.Message);
}
finally
{
socketClient.Close();
logEx.Info("SipStackAdapter.GetLocalIP finally,Close the socketClient success");
}
#endregion
}
//如果serverIP为IPv6
else if (serverAddress.AddressFamily.Equals(AddressFamily.InterNetworkV6) && ip.AddressFamily.Equals(serverAddress.AddressFamily))
{
#region IPV6
IPEndPoint serverEndpoint = new IPEndPoint(serverAddress, serverPort);
Socket socketClient = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
IPEndPoint clientEndpoint = new IPEndPoint(ip, localPort);
socketClient.Bind(clientEndpoint);
try
{
socketClient.Connect(serverEndpoint);
if (socketClient.Connected)
{
logEx.Trace("SipStackAdapter.try GetLocalIP ={0}.", ip.ToString());
return ip.ToString();
}
}
catch (SocketException e)
{
//logEx.Warn("SipStackAdapter.GetLocalIP failed,e.ErrorCode:{0}", e.ErrorCode);
if (e.ErrorCode == 10061 || e.ErrorCode == 10048) //Even No connection could be made because the target machine actively refused it ,but IP is valid.
{
logEx.Trace("SipStackAdapter.catch GetLocalIP ={0}.", ip.ToString());
return ip.ToString();
}
logEx.Error("SipStackAdapter.GetLocalIP failed.catch Execption message:{0}", e.Message);
}
finally
{
socketClient.Close();
logEx.Info("SipStackAdapter.GetLocalIP finally,Close the socketClient success");
}
#endregion
}
}
return null;
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.GetLocalIP failed.Execption message:{0}", ex.Message);
return null;
}
}
/// <summary>
/// 打开通道，开始接收实况RTP数据流
/// </summary>
/// <param name="cameraCode">摄像机编码</param>
/// <returns></returns>
public UInt32 StartRecvStream(string cameraCode, string domain, string iSipPort, string localPort)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.StartRecvStream cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
try
{
//接收视频码流RTP端口号
uint uiLocalRecvStreamVideoRtpPort = 0;
//接收音频码流RTP端口号
uint uiLocalRecvStreamAudioRtpPort = 0;
//通道号
UInt32 uiChannel = 0;
//string strLocal = GetLocalIP(domain, Convert.ToInt32(iSipPort), Convert.ToInt32(localPort));
if (string.IsNullOrEmpty(localIP))
{
localIP = GetLocalIP(domain, Convert.ToInt32(iSipPort), Convert.ToInt32(localPort));
}
string strLocal = localIP;
//获取可用通道
NetSourcedInterface.IVS_NETSOURCE_GetChannel(ref uiChannel);
//用户参数,4字节整数
IntPtr pUser = Marshal.AllocHGlobal(4);
Marshal.Copy(new int[1] { Convert.ToInt32(uiChannel) }, 0, pUser, 1);
//设置媒体流回调函数
NetSourcedInterface.IVS_NETSOURCE_SetDataCallBack(uiChannel, cbDataCallBack, pUser);
//异常回调函数
IVS_NETSOURCE_RESULT iRet = NetSourcedInterface.IVS_NETSOURCE_SetExceptionCallBack(cbNetExceptionCallBack, pUser);
//协议类型 UDP
iRet = NetSourcedInterface.IVS_NETSOURCE_SetProtocolType(uiChannel, 1);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_SetProtocolType failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
iRet = NetSourcedInterface.IVS_NETSOURCE_SetLocalRecvStreamIP(uiChannel, localIP);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_SetLocalRecvStreamIP failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
iRet = NetSourcedInterface.IVS_NETSOURCE_GetLocalRecvStreamPort(uiChannel, ref uiLocalRecvStreamVideoRtpPort, ref uiLocalRecvStreamAudioRtpPort);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_GetLocalRecvStreamPort failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
//Invite消息体
string strRealPlay = "v=0\r\n"
+ "o=" + cameraCode + @" 0 0 IN IP4 " + strLocal + "\r\n"
+ "s=Play\r\n"
+ "c=IN IP4 " + strLocal + "\r\n"
+ "t=0 0\r\n"
+ "m=video " + uiLocalRecvStreamVideoRtpPort + " RTP/AVP 96 98 97\r\n"
+ "a=recvonly\r\n"
+ "a=rtpmap:96 PS/90000\r\n"
+ "a=rtpmap:98 H264/90000\r\n"
+ "a=rtpmap:97 MPEG4/90000\r\n";
//发送SIP Invite消息
int iResponseID = 0;
//制定字符串长度为1024
StringBuilder strRemoteBody = new StringBuilder(1024);
//发送SIP Invite消息
EM_SIP_RESULT iSip = SIP_SDK_INVITE(cameraCode, strRealPlay, ref iResponseID, strRemoteBody);
if (iSip != EM_SIP_RESULT.RET_SUCCESS)
{
logEx.Error("SipStackAdapter.SIP_SDK_INVITE failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
//源端发送码流IP;
string pRemoteSendStreamIp = "";
//源端发送视频码流RTP端口号
uint uiRemoteSendStreamVideoPort = 0;
GetInviteRemoteIPPort(strRemoteBody.ToString(), ref pRemoteSendStreamIp, ref uiRemoteSendStreamVideoPort);
iRet = NetSourcedInterface.IVS_NETSOURCE_OpenNetStream(uiChannel, pRemoteSendStreamIp, uiRemoteSendStreamVideoPort, 0);//无音频，传入0
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
iRet = NetSourcedInterface.IVS_NETSOURCE_StartRecvStream(uiChannel);
if (iRet == IVS_NETSOURCE_RESULT.SUCCESS)
{
channelResponseIDDic.Add(uiChannel, iResponseID);
channelInPtrDic.Add(uiChannel, pUser);
logEx.Info("SipStackAdapter.StartRecvStream pChannel: {0}, cameraCode :{1},domain = {2},iSipPort ={3} ", uiChannel, cameraCode, domain, iSipPort);
return uiChannel;
}
else
{
logEx.Error("SipStackAdapter.StartRecvStream failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
StopRecvStream(uiChannel);
Marshal.FreeHGlobal(pUser);
return CgwConst.T28181_ERROR_HANDLE;
}
}
catch (System.Exception ex)
{
logEx.Error("StartRecvStream failed.Exception message:{0},cameraCode :{0},domain = {1},iSipPort ={2}", ex.Message, cameraCode, domain, iSipPort);
return CgwConst.T28181_ERROR_HANDLE;
}
}
/// <summary>
/// 该函数用于发送SIP Register消息
/// </summary>
public EM_SIP_RESULT SIP_SDK_REGISTER()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.SIP_SDK_REGISTER().");
EM_SIP_RESULT iRet = EM_SIP_RESULT.RET_FAILURE;
try
{
iRet = SipSDKInterface.SIP_SDK_REGISTER();
if (iRet != EM_SIP_RESULT.RET_SUCCESS)
{
logEx.Error("SipStackAdapter.SIP_SDK_REGISTER Error = {0}.", Enum.GetName(typeof(EM_SIP_RESULT), iRet));
}
else
{
logEx.Info("SipStackAdapter.SIP_SDK_REGISTER Success");
}
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.SIP_SDK_REGISTER ,Exception:{0}", ex.ToString());
iRet = EM_SIP_RESULT.RET_FAILURE;
}
return iRet;
}
/// <summary>
/// 该函数用于发送SIP Invite消息
/// </summary>
/// <param name="pAccount">对方账号</param>
/// <param name="pSdpBody">SDP描述字符串</param>
public EM_SIP_RESULT SIP_SDK_INVITE(string pAccount, string pSdpBody, ref int iResponseID, StringBuilder strRemoteBody)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.SIP_SDK_INVITE().");
iResponseID = 0;
EM_SIP_RESULT iRet = EM_SIP_RESULT.RET_FAILURE;
try
{
iRet = SipSDKInterface.SIP_SDK_INVITE(pAccount, pSdpBody, ref iResponseID, strRemoteBody);
SIP_SDK_ACK(iResponseID);
if (iRet != EM_SIP_RESULT.RET_SUCCESS)
{
logEx.Error("SipStackAdapter.SIP_SDK_INVITE ,pSdpBody:{0}", pSdpBody);
}
else
{
logEx.Info("SipStackAdapter.SIP_SDK_INVITE ,iResponseID={0}", iResponseID);
}
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.SIP_SDK_INVITE ,Exception:{0}", ex.ToString());
iRet = EM_SIP_RESULT.RET_FAILURE;
}
return iRet;
}
/// <summary>
/// 该函数用于发送SIP ACK消息
/// </summary>
/// <param name="iResponseID">iResponseID</param>
public EM_SIP_RESULT SIP_SDK_ACK(int iResponseID)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.SIP_SDK_ACK().");
EM_SIP_RESULT iRet = EM_SIP_RESULT.RET_FAILURE;
try
{
iRet = SipSDKInterface.SIP_SDK_ACK(iResponseID);
if (iRet != EM_SIP_RESULT.RET_SUCCESS)
{
logEx.Error("SipStackAdapter.SIP_SDK_ACK ,iResponseID:{0}", iResponseID);
}
else
{
logEx.Info("SipStackAdapter.SIP_SDK_ACK ,iResponseID={0}", iResponseID);
}
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.SIP_SDK_ACK ,Exception:{0}", ex.ToString());
iRet = EM_SIP_RESULT.RET_FAILURE;
}
return iRet;
}
/// <summary>
/// 初始化监控平台
/// </summary>
/// <returns></returns>
public SmcErr Load()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Info("Enter: VideoMonitorManage.Load()");
SmcErr err = new CgwError();
XmlElement monitorsRootElement = ConfigSettings.MonitorSettings;
if (monitorsRootElement == null)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Monitor config file is invalid.Can not found monitorSettings node.");
return(err);
}
foreach (XmlNode monitorNode in monitorsRootElement)
{
XmlElement monitorElement = monitorNode as XmlElement;
if (monitorElement == null)
{
continue;
}
else if (CgwConst.MONITOR_TAG.Equals(monitorElement.Name))
{
//判断监控平台是否启用
string isEnable = monitorElement.GetAttribute(CgwConst.ENABLE_TAG).Trim();
if (!CgwConst.TRUE_TAG.Equals(isEnable.ToLower()))
{
logEx.Warn("This monitor is disable.");
continue;
}
string monitorId;
string className;
err = GetMonitorConfig(monitorElement, out monitorId, out className);
if (!err.IsSuccess())
{
return(err);
}
IVideoMonitor videoMonitor;
//加载监控平台
err = CreateMonitor(monitorId, className, out videoMonitor);
if (!err.IsSuccess())
{
logEx.Error("Create monitor failed.monitorId:{0}, className:{1}, Error code:{2}", monitorId, className, err.ErrNo);
return(err);
}
err = videoMonitor.Load(monitorElement);
if (err.IsSuccess())
{
if (this.monitorsOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
monitorsDictionary.Add(monitorId, videoMonitor);
}
catch (Exception e)
{
logEx.Error("Load monitor failed.Execption message:{0}", e.Message);
return(err);
}
finally
{
this.monitorsOperateLock.ExitWriteLock();
}
}
}
else
{
logEx.Error("Load monitor failed.MonitorId:{0},Error code:{1}", monitorId, err.ErrNo);
return(err);
}
}
}
logEx.Info("Load all monitors success.");
return(err);
}
/// <summary>
/// 启动实时预览
/// </summary>
/// <param name="dev_id">主机ID </param>
/// <param name="cameraMediaServer">设备端接入的流媒体服务器信息 </param>
/// <param name="info">实时播放信息</param>
/// <returns>-1 失败，其他则是返回预览句柄</returns>
public int StartReceiveVideo(string dev_id, MediaServer cameraMediaServer, ref RealPlayInfo info)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandySdkClient.StartReceiveVideo({0},{1},{2}).", dev_id, cameraMediaServer.No, info);
int iPlayFd = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
//如果摄像机的流媒体服务器为空，那么启动码流失败
if (cameraMediaServer == null)
{
logEx.Error("cameraMediaServer can't be null");
return(CgwConst.START_RECEIVE_VIDEO_DATA_FAILED);
}
MediaServer clientMediaServer = this.sdkMediaServer;
if (clientMediaServer == null)
{
clientMediaServer = cameraMediaServer;
}
try
{
iPlayFd = client_sdk_realplay2_ex(
dev_id,
clientMediaServer.User,
clientMediaServer.Pwd,
clientMediaServer.No,
cameraMediaServer.No,
clientMediaServer.Ip,
clientMediaServer.Port,
ref info,
null,
0);
if (iPlayFd == CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
logEx.Error("Call Tiandy sdk function client_sdk_realplay2_ex failed.");
return(iPlayFd);
}
else
{
logEx.Info("Call Tiandy sdk function client_sdk_realplay2_ex success.dev_id:{0},username:{1},client_sup_id:{2},dev_sup_id{3},client_sup_ip:{4},client_sup_port:{5}.",
dev_id,
clientMediaServer.User,
clientMediaServer.No,
cameraMediaServer.No,
clientMediaServer.Ip,
clientMediaServer.Port);
}
//预览成功设置码流回调
//if (!client_sdk_set_realdata_callback(iPlayFd, func, 0))
if (!client_sdk_set_h264_callback(iPlayFd, this.sdkRealDataCallBackFunc, 0))
{
logEx.Error("Start Receive camera video data failed.Call Tiandy sdk function client_sdk_set_h264_callback failed.playfd:{0}", iPlayFd);
return(CgwConst.START_RECEIVE_VIDEO_DATA_FAILED);
}
else
{
logEx.Info("Call Tiandy sdk function client_sdk_set_h264_callback success.playfd:{0}", iPlayFd);
}
//因天地伟业的预览接口是异步的，还需要通过消息回调判断是否成功
int count = 0;
bool isSuccess = false;
//循环5次
while (count < 5)
{
//等待500ms
Thread.Sleep(CgwConst.CHECK_RECEIVE_STATUS_WAIT_TIME);
if (this.handelOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.receiveSuccHandle.Contains(iPlayFd))
{
logEx.Info("Start Receive camera video data success.");
isSuccess = true;
break;
}
}
finally
{
this.handelOperateLock.ExitReadLock();
}
}
//等待500ms
Thread.Sleep(CgwConst.CHECK_RECEIVE_STATUS_WAIT_TIME);
count++;
}
if (!isSuccess)
{
logEx.Error("Set callback function success. But not receive any video data.Try to stop receive.");
client_sdk_set_h264_callback(iPlayFd, null, 0);
client_sdk_stop_realplay(iPlayFd);
iPlayFd = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
}
}
catch (Exception e)
{
iPlayFd = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
logEx.Error("Start Receive camera video data failed.Exception message:{0}.", e.Message);
}
return(iPlayFd);
}
/// <summary>
/// 获取监控摄像头列表刷新状态，返回结果为0是表示刷新完毕，为1是刷新操作中。当查询刷新状态为0时，可调用获取监控摄像头列表接口，获取刷新后监控摄像头列表
/// </summary>
/// <param name="refreshStatus">刷新状态</param>
/// <returns></returns>
public SmcErr GetRefreshStatus(out SmcErr refreshStatus)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.GetRefreshStatus");
SmcErr err = new CgwError();
refreshStatus = new SmcErr();
refreshStatus.ErrNo = CgwError.ERR_DEVICE_LIST_REFRESH_STATUS_END;
if (refreshMonitorCameraOperateLock.TryEnterWriteLock(CgwConst.EFRESH_MONITOR_CAMERA_WAIT_TIME))
{
try
{
refreshStatus.ErrNo = isRefreshSucess ? CgwError.ERR_DEVICE_LIST_REFRESH_STATUS_END : CgwError.ERR_DEVICE_LIST_REFRESH_STATUS_FAILED;
}
finally
{
refreshMonitorCameraOperateLock.ExitWriteLock();
}
}
else
{
refreshStatus.ErrNo = CgwError.ERR_DEVICE_LIST_REFRESH_STATUS_EXECUTING;
}
logEx.Info("GetRefreshStatus success.");
return err;
}
/// <summary>
/// 预览摄像头视频，使用命名管道方式接收数据
/// </summary>
/// <param name="cameraNo"></param>
/// <param name="pipeName"></param>
/// <returns></returns>
public Cgw.SmcError.SmcErr StartReceiveVideoByPipe(string cameraNo, out string pipeName)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: CgwMonitorManageAdapter.StartReceiveVideoByPipe");
pipeName = "";
Cgw.SmcError.SmcErr err = new Cgw.SmcError.SmcErr();
try
{
//if (serviceControl.MonitorServiceRun() && client.State == CommunicationState.Opened)
if (serviceControl.MonitorServiceRun())
{
client = new MonitorManageServiceClient();
CgwMonitorManageServiceReference.SmcErr serviceErr = client.StartReceiveVideoByPipe(out pipeName, cameraNo);
client.Close();
if (serviceErr.ErrNo != Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_SUCCESS)
{
logEx.Error("CgwMonitorManageAdapter.StartReceiveVideoByPipe failed. ErrNo = {0} ", serviceErr.ErrNo);
err = SetCgwErrNo(serviceErr);
}
else
{
//将摄像头通道删除。避免重启服务后，VideoPipe未清除，导致调用停止播放。by zWX231378 2015/7/16
VideoPipe delVideoPipe = VideoPipeManage.Instance().DeleteVideoPipe(cameraNo);
if (delVideoPipe != null)
{
logEx.Info("CgwMonitorManageAdapter.StartReceiveVideoByPipe delete VideoPipe. cameraNo = {0}", cameraNo);
delVideoPipe.Stop();
}
VideoPipe videoPipe = VideoPipeManage.Instance().AddVideoPipe(cameraNo, pipeName);
if (videoPipe != null)
{
try
{
videoPipe.Run();
if (videoPipe.HaveConnect)
{
videoPipe.ReadData(this.dataCallBack);
logEx.Info("CgwMonitorManageAdapter.StartReceiveVideoByPipe Success. pipeName = {0} ", pipeName);
}
else
{
logEx.Error("CgwMonitorManageAdapter.StartReceiveVideoByPipe failed. cameraNo = {0} ", cameraNo);
}
}
catch (System.Exception ex)
{
logEx.Error("CgwMonitorManageAdapter.StartReceiveVideoByPipe Exception= {0} ", ex.ToString());
}
}
else
{
logEx.Error("CgwMonitorManageAdapter.StartReceiveVideoByPipe failed. cameraNo = {0} ", cameraNo);
}
}
}
else
{
//当监控服务未启动,则关闭管道。
//StopReceiveVideoByPipe(cameraNo);
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
}
}
catch (System.Exception ex)
{
err.SetErrorNo(Cgw.SmcError.CgwError.ERR_MONITOR_MANAGE_SERVICE_RESTARTING);
logEx.Error("CgwMonitorManageServiceReference.StartReceiveVideoByPipe failed. Exception is {0} ", ex.ToString());
}
return(err);
}
/// <summary>
/// 启动摄像头预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns></returns>
public SmcErr StartReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.StartReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
TiandyCamera camera = null;
Host host = null;
//摄像头所连接的流媒体服务器
MediaServer cameraMediaServer = null;
if (this.cameraOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (!this.tiandyCameraDictionary.ContainsKey(cameraNo))
{
err.SetErrorNo(CgwError.CAMERA_NOT_FOUND);
logEx.Error("Start Receive camera video data failed.Camera No is not found.Camera No:{0}", cameraNo);
return err;
}
camera = this.tiandyCameraDictionary[cameraNo];
host = this.hostDictionary[camera.HostNo];
cameraMediaServer = this.mediaServerDictionary[host.MediaServerNo];
}
catch (Exception e)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0},Execption message:{1}", cameraNo, e.Message);
return err;
}
finally
{
this.cameraOperateLock.ExitReadLock();
}
}
if (camera == null)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No is not found.Camera No:{0}", cameraNo);
return err;
}
RealPlayInfo real = new RealPlayInfo();
real.ch = camera.Channel;
real.data_type = (int)TiandyDateType.PRIMARY;
real.hPlayWnd = null;
int result = this.sdkClient.StartReceiveVideo(host.No, cameraMediaServer, ref real);
//如果为负数，表示预览失败
if (result < 0)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0}.", cameraNo);
return err;
}
else
{
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
//如果预览句柄已经存在，删除掉原来的句柄,用新的句柄替换
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
this.cameraVideoHandeDic.Add(cameraNo, result);
this.videoHandleCameraDic.Add(result, cameraNo);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
logEx.Info("Start Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, result);
//重新预览后，更新了预览句柄，需要将原来的预览停止，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
this.sdkClient.StopReceiveVideo(needToStopHandel);
}
}
return err;
}
/// <summary>
/// 打开通道，开始接收实况RTP数据流
/// </summary>
/// <param name="cameraCode">摄像机编码</param>
/// <returns></returns>
public UInt32 StartRecvStream(string cameraCode, string domain, string iSipPort, string localPort)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.StartRecvStream cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
try
{
//接收视频码流RTP端口号
uint uiLocalRecvStreamVideoRtpPort = 0;
//接收音频码流RTP端口号
uint uiLocalRecvStreamAudioRtpPort = 0;
//通道号
UInt32 uiChannel = 0;
//string strLocal = GetLocalIP(domain, Convert.ToInt32(iSipPort), Convert.ToInt32(localPort));
if (string.IsNullOrEmpty(localIP))
{
localIP = GetLocalIP(domain, Convert.ToInt32(iSipPort), Convert.ToInt32(localPort));
}
string strLocal = localIP;
//获取可用通道
NetSourcedInterface.IVS_NETSOURCE_GetChannel(ref uiChannel);
//用户参数,4字节整数
IntPtr pUser = Marshal.AllocHGlobal(4);
Marshal.Copy(new int[1] {
Convert.ToInt32(uiChannel)
}, 0, pUser, 1);
//设置媒体流回调函数
NetSourcedInterface.IVS_NETSOURCE_SetDataCallBack(uiChannel, cbDataCallBack, pUser);
//异常回调函数
IVS_NETSOURCE_RESULT iRet = NetSourcedInterface.IVS_NETSOURCE_SetExceptionCallBack(cbNetExceptionCallBack, pUser);
//协议类型 UDP
iRet = NetSourcedInterface.IVS_NETSOURCE_SetProtocolType(uiChannel, 1);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_SetProtocolType failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
iRet = NetSourcedInterface.IVS_NETSOURCE_SetLocalRecvStreamIP(uiChannel, localIP);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_SetLocalRecvStreamIP failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
iRet = NetSourcedInterface.IVS_NETSOURCE_GetLocalRecvStreamPort(uiChannel, ref uiLocalRecvStreamVideoRtpPort, ref uiLocalRecvStreamAudioRtpPort);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream.IVS_NETSOURCE_GetLocalRecvStreamPort failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
//Invite消息体
string strRealPlay = "v=0\r\n"
+ "o=" + cameraCode + @" 0 0 IN IP4 " + strLocal + "\r\n"
+ "s=Play\r\n"
+ "c=IN IP4 " + strLocal + "\r\n"
+ "t=0 0\r\n"
+ "m=video " + uiLocalRecvStreamVideoRtpPort + " RTP/AVP 96 98 97\r\n"
+ "a=recvonly\r\n"
+ "a=rtpmap:96 PS/90000\r\n"
+ "a=rtpmap:98 H264/90000\r\n"
+ "a=rtpmap:97 MPEG4/90000\r\n";
//发送SIP Invite消息
int iResponseID = 0;
//制定字符串长度为1024
StringBuilder strRemoteBody = new StringBuilder(1024);
//发送SIP Invite消息
EM_SIP_RESULT iSip = SIP_SDK_INVITE(cameraCode, strRealPlay, ref iResponseID, strRemoteBody);
if (iSip != EM_SIP_RESULT.RET_SUCCESS)
{
logEx.Error("SipStackAdapter.SIP_SDK_INVITE failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
//源端发送码流IP;
string pRemoteSendStreamIp = "";
//源端发送视频码流RTP端口号
uint uiRemoteSendStreamVideoPort = 0;
GetInviteRemoteIPPort(strRemoteBody.ToString(), ref pRemoteSendStreamIp, ref uiRemoteSendStreamVideoPort);
iRet = NetSourcedInterface.IVS_NETSOURCE_OpenNetStream(uiChannel, pRemoteSendStreamIp, uiRemoteSendStreamVideoPort, 0);//无音频，传入0
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.StartRecvStream failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
iRet = NetSourcedInterface.IVS_NETSOURCE_StartRecvStream(uiChannel);
if (iRet == IVS_NETSOURCE_RESULT.SUCCESS)
{
channelResponseIDDic.Add(uiChannel, iResponseID);
channelInPtrDic.Add(uiChannel, pUser);
logEx.Info("SipStackAdapter.StartRecvStream pChannel: {0}, cameraCode :{1},domain = {2},iSipPort ={3} ", uiChannel, cameraCode, domain, iSipPort);
return(uiChannel);
}
else
{
logEx.Error("SipStackAdapter.StartRecvStream failed. cameraCode :{0},domain = {1},iSipPort ={2}", cameraCode, domain, iSipPort);
StopRecvStream(uiChannel);
Marshal.FreeHGlobal(pUser);
return(CgwConst.T28181_ERROR_HANDLE);
}
}
catch (System.Exception ex)
{
logEx.Error("StartRecvStream failed.Exception message:{0},cameraCode :{0},domain = {1},iSipPort ={2}", ex.Message, cameraCode, domain, iSipPort);
return(CgwConst.T28181_ERROR_HANDLE);
}
}
/// <summary>
/// sdk回调函数，用于重连
/// </summary>
/// <param name="iEventType">事件类型</param>
/// <param name="pEventBuf"> 数据</param>
/// <param name="uiBufSize">buf长度</param>
/// <param name="pUserData">用户数据，自定义，相应回调函数被调用时返回该参数</param>
public void IvsEventCallBackFunc(int iEventType, IvsUserOfflineOff pEventBuf, UInt32 uiBufSize, string pUserData)
{
if (10019 == iEventType || 10301 == iEventType)//用户下线通知、客户端登录失败
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
IvsLoginInfo loginInfo = new IvsLoginInfo();
loginInfo.Ip = ip;
loginInfo.Port = int.Parse(port);
loginInfo.User = user;
//loginInfo.Pwd = password;
loginInfo.Pwd = CommonFunction.DecryptByte2Str(pwdByte,CgwConst.PASSWORD_TAG);
logEx.Info("IvsEventCallBackFunc.user ={0}.", user);
//使用线程轮询加载监控平台
Thread loaderThread = new Thread(LoginThread);
loaderThread.IsBackground = true;
loaderThread.Start(loginInfo);
}
}
/// <summary>
/// 获取本机ip
/// </summary>
/// <returns></returns>
private string GetLocalIP(string serverIP, int serverPort, int localPort)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.GetLocalIP().");
try
{
IPAddress serverAddress = IPAddress.Parse(serverIP);
IPAddress[] arrIPAddresses = Dns.GetHostAddresses(System.Environment.MachineName);
foreach (IPAddress ip in arrIPAddresses)
{
//如果serverIP为IPv4
if (serverAddress.AddressFamily.Equals(AddressFamily.InterNetwork) && ip.AddressFamily.Equals(serverAddress.AddressFamily))
{
#region IPv4
IPEndPoint serverEndpoint = new IPEndPoint(serverAddress, serverPort);
Socket socketClient = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
IPEndPoint clientEndpoint = new IPEndPoint(ip, localPort);
socketClient.Bind(clientEndpoint);
try
{
socketClient.Connect(serverEndpoint);
if (socketClient.Connected)
{
logEx.Trace("SipStackAdapter.try GetLocalIP ={0}.", ip.ToString());
return(ip.ToString());
}
}
catch (SocketException e)
{
//logEx.Warn("SipStackAdapter.GetLocalIP failed,e.ErrorCode:{0}", e.ErrorCode);
if (e.ErrorCode == 10061 || e.ErrorCode == 10048) //Even No connection could be made because the target machine actively refused it ,but IP is valid.
{
logEx.Trace("SipStackAdapter.catch GetLocalIP ={0}.", ip.ToString());
return(ip.ToString());
}
logEx.Error("SipStackAdapter.GetLocalIP failed.catch Execption message:{0}", e.Message);
}
finally
{
socketClient.Close();
logEx.Info("SipStackAdapter.GetLocalIP finally,Close the socketClient success");
}
#endregion
}
//如果serverIP为IPv6
else if (serverAddress.AddressFamily.Equals(AddressFamily.InterNetworkV6) && ip.AddressFamily.Equals(serverAddress.AddressFamily))
{
#region IPV6
IPEndPoint serverEndpoint = new IPEndPoint(serverAddress, serverPort);
Socket socketClient = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
IPEndPoint clientEndpoint = new IPEndPoint(ip, localPort);
socketClient.Bind(clientEndpoint);
try
{
socketClient.Connect(serverEndpoint);
if (socketClient.Connected)
{
logEx.Trace("SipStackAdapter.try GetLocalIP ={0}.", ip.ToString());
return(ip.ToString());
}
}
catch (SocketException e)
{
//logEx.Warn("SipStackAdapter.GetLocalIP failed,e.ErrorCode:{0}", e.ErrorCode);
if (e.ErrorCode == 10061 || e.ErrorCode == 10048) //Even No connection could be made because the target machine actively refused it ,but IP is valid.
{
logEx.Trace("SipStackAdapter.catch GetLocalIP ={0}.", ip.ToString());
return(ip.ToString());
}
logEx.Error("SipStackAdapter.GetLocalIP failed.catch Execption message:{0}", e.Message);
}
finally
{
socketClient.Close();
logEx.Info("SipStackAdapter.GetLocalIP finally,Close the socketClient success");
}
#endregion
}
}
return(null);
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.GetLocalIP failed.Execption message:{0}", ex.Message);
return(null);
}
}
/// <summary>
/// 指定码流回调函数
/// </summary>
/// <param name="videoDataCallBack"></param>
/// <param name="sender"></param>
public void SetDataCallBackFunc(DataCallBack videoDataCallBack, string sender)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.SetVideoDataCallBackFunc().");
this.dataCallBack = videoDataCallBack;
this.sender = sender;
logEx.Info("Set VideoDataCallBackFunc success. Monitor id:{0}", this.monitorId);
}
/// <summary>
/// 初始化IVS监控平台
/// </summary>
/// <param name="monitorConfigElement">监控平台配置节点</param>
/// <returns></returns>
public SmcErr Load(XmlElement monitorConfigElement)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Info("Enter: IvsVideoMonitor.Load().");
SmcErr err = new CgwError();
try
{
//解析xml节点，获取所需参数
this.monitorId = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.ID_TAG);
ip = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.IP_TAG);
port = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PORT_TAG);
user = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.USER_TAG);
//password = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PASSWORD_TAG);
pwdByte = CommonFunction.EncryptStr2Byte(CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PASSWORD_TAG), CgwConst.PASSWORD_TAG);
//从配置文件读取的参数要简单判断一下合法性
//初始化之前设置日志路径
logEx.Trace("Call SetLogPath:{0}", ivsLogPath);
this.ivsSdkClient.SetLogPath(ivsLogPath);
logEx.Trace("Call ivsSdkClient.Init().");
//初始化
int result = this.ivsSdkClient.Init();
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
//直接将IVS的错误码返回
err.SetErrorNo(CgwError.MONITOR_LOAD_FAILED);
logEx.Error("Init ivs monitor failed.Monitor id:{0}.ivs sdk error code:{1}.", this.monitorId, result);
return(err);
}
else
{
logEx.Info("Init ivs sdk success.Monitor id:{0}", this.monitorId);
}
//设置监控平台id
this.ivsSdkClient.SetId(this.monitorId);
this.sdkCallbackFunc = IvsRealPlayCallBackRaw;
this.ivsSdkClient.SetRealPlayCBRawCallBackFunc(this.sdkCallbackFunc);
//sdk事件回调
this.ivsEventCallBackFunc = IvsEventCallBackFunc;
this.ivsSdkClient.SetEventCallBackFunc(this.ivsEventCallBackFunc);
IvsLoginInfo loginInfo = new IvsLoginInfo();
loginInfo.Ip = ip;
loginInfo.Port = int.Parse(port);
loginInfo.User = user;
//loginInfo.Pwd = password;
loginInfo.Pwd = CommonFunction.DecryptByte2Str(pwdByte, CgwConst.PASSWORD_TAG);
loadResult = false;
//使用线程轮询加载监控平台
Thread loaderThread = new Thread(LoginThread);
loaderThread.IsBackground = true;
loaderThread.Start(loginInfo);
}
catch (Exception e)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load ivs monitor failed.Execption message:{0}.", e.Message);
return(err);
}
logEx.Info("Load video monitor success.Monitor id:{0}.", this.monitorId);
return(err);
}
/// <summary>
/// 启动摄像头预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns></returns>
public SmcErr StartReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StartReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
int handle;
logEx.Trace("Call ivsSdkClient.StartRealPlayCBRaw({0}).", cameraNo);
int result = this.ivsSdkClient.StartRealPlayCBRaw(cameraNo, out handle);
//如果不为0，表示预览失败
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0}.Ivs sdk error code:{1}", cameraNo, result);
return err;
}
else
{
logEx.Info("Start Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, handle);
}
//预览成功，需要停止原来的预览，并将预览句柄添加到缓存
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
//如果预览句柄已经存在，删除掉原来的句柄,用新的句柄替换
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
this.cameraVideoHandeDic.Add(cameraNo, handle);
MediaDataSender mediaDataSender = new MediaDataSender(cameraNo, this.dataCallBack);
this.videoHandleCameraDic.Add(handle, mediaDataSender);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
//重新预览后，更新了预览句柄，需要将原来的预览停止，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
result = this.ivsSdkClient.StopRealPlay(needToStopHandel);
//如果不为0，表示停止原来的预览失败，只记录日志，不返回错误，不设置错误码
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Error("Get a new preview success. But stop old preview failed.CameraNo:{0},Ivs sdk error code:{0}", cameraNo, result);
return err;
}
}
return err;
}
/// <summary>
/// 启动摄像头预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns></returns>
public SmcErr StartReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StartReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
int handle;
logEx.Trace("Call ivsSdkClient.StartRealPlayCBRaw({0}).", cameraNo);
int result = this.ivsSdkClient.StartRealPlayCBRaw(cameraNo, out handle);
//如果不为0，表示预览失败
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0}.Ivs sdk error code:{1}", cameraNo, result);
return(err);
}
else
{
logEx.Info("Start Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, handle);
}
//预览成功，需要停止原来的预览，并将预览句柄添加到缓存
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
//如果预览句柄已经存在，删除掉原来的句柄,用新的句柄替换
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
this.cameraVideoHandeDic.Add(cameraNo, handle);
MediaDataSender mediaDataSender = new MediaDataSender(cameraNo, this.dataCallBack);
this.videoHandleCameraDic.Add(handle, mediaDataSender);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
//重新预览后，更新了预览句柄，需要将原来的预览停止，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
result = this.ivsSdkClient.StopRealPlay(needToStopHandel);
//如果不为0，表示停止原来的预览失败，只记录日志，不返回错误，不设置错误码
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Error("Get a new preview success. But stop old preview failed.CameraNo:{0},Ivs sdk error code:{0}", cameraNo, result);
return(err);
}
}
return(err);
}
/// <summary>
/// 停止预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns>成功返回0，失败返回错误码</returns>
public SmcErr StopReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.StopReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
else
{
logEx.Warn("Stop Receive camera video data failed. Don't need to end the preview.Camera No:{0}.", cameraNo);
//如果预览句柄不存在，不需要处理，直接返回
return err;
}
}
catch (Exception ex)
{
err.SetErrorNo(CgwError.STOP_RECEIVE_VIDEO_FAILED);
logEx.Error("Stop Receive camera video data failed.Execption message:{0}", ex.Message);
return err;
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
//调用sdk的停止方法，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
int result = this.ivsSdkClient.StopRealPlay(needToStopHandel);
//如果不为0，表示预览失败
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
err.SetErrorNo(CgwError.STOP_RECEIVE_VIDEO_FAILED);
logEx.Error("Stop Receive camera video data failed.Ivs sdk error code:{0}", result);
return err;
}
logEx.Info("Stop Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, needToStopHandel);
}
return err;
}
/// <summary>
/// 启动摄像头预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns></returns>
public SmcErr StartReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.StartReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
//打开通道，开始接收实况RTP数据流
UInt32 channel = sipStack.StartRecvStream(cameraNo, domain, sipPort);
//如果为0，表示预览失败
if (channel == CgwConst.T28181_ERROR_HANDLE)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Start Receive camera video data failed.Camera No:{0}.Handle:{1}.", cameraNo, channel);
return(err);
}
else
{
logEx.Info("Start Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, channel);
}
//设置rtp解析回调函数
rtpAdapter.ESDK_RTP_OpenChannel(frameDataCallBack, channel);
//预览成功，需要停止原来的预览，并将预览句柄添加到缓存
//需要停止的预览句柄
UInt32 needToStopChannel = CgwConst.T28181_ERROR_HANDLE;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
//如果预览句柄已经存在，删除掉原来的句柄,用新的句柄替换
if (this.cameraVideoChannelDic.ContainsKey(cameraNo))
{
needToStopChannel = this.cameraVideoChannelDic[cameraNo];
this.videoChannelDataSenderDic.Remove(needToStopChannel);
this.cameraVideoChannelDic.Remove(cameraNo);
//关闭rtp回调
rtpAdapter.ESDK_RTP_CloseChannel(needToStopChannel);
}
this.cameraVideoChannelDic.Add(cameraNo, channel);
MediaDataSender mediaDataSender = new MediaDataSender(cameraNo, this.dataCallBack);
this.videoChannelDataSenderDic.Add(channel, mediaDataSender);
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
//重新预览后，更新了预览句柄，需要将原来的预览停止，放在handelOperateLock外面，防止长时间占用锁
if (needToStopChannel != CgwConst.T28181_ERROR_HANDLE)
{
int result = sipStack.StopRecvStream(needToStopChannel);
//如果不为0，表示停止原来的预览失败，只记录日志，不返回错误，不设置错误码
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
err.SetErrorNo(CgwError.START_RECEIVE_VIDEO_FAILED);
logEx.Error("Get a new preview success. But stop old preview failed.CameraNo:{0},Ivs sdk error code:{0}", cameraNo, result);
return(err);
}
}
return(err);
}
/// <summary>
/// 获取摄像头列表及分组信息
/// </summary>
private void GetAllCamerasMethod()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.GetAllCamerasMethod().");
try
{
//1、获取系统中所有的域
List<IvsDomainRoute> ivsDomainRouteList;
logEx.Trace("Call ivsSdkClient.GetDomainRoute().");
int result = this.ivsSdkClient.GetDomainRoute(out ivsDomainRouteList);
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDomainRoute success.List count:{0}", ivsDomainRouteList.Count);
}
else
{
logEx.Error("GetDomainRoute failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
List<Camera> cameraListTemp = new List<Camera>();
List<CameraGroup> groupListTemp = new List<CameraGroup>();
List<NodeRelation> nodeRelationListTemp = new List<NodeRelation>();
Dictionary<string, NodeRelation> nodeRelationDicTemp = new Dictionary<string, NodeRelation>();
foreach (IvsDomainRoute route in ivsDomainRouteList)
{
//加上此判断条件的话，子域将不会作查目录处理，不合理，故注释掉
//if (route.ParentDomain != "")
//{
// continue;
//}
Dictionary<string, IvsCameraGroup> ivsCameraGroupDic;
logEx.Trace("Call ivsSdkClient.GetDeviceGroupList({0},{1}，out groupCount, out ivsCameraGroupDic).",
route.DomainCode,
CgwConst.IVS_SDK_ROOTGROUP_TAG);
result = this.ivsSdkClient.GetDeviceGroupList(route.DomainCode,
CgwConst.IVS_SDK_ROOTGROUP_TAG,
out ivsCameraGroupDic);
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDeviceGroupList success.Current group count:{0}", ivsCameraGroupDic.Count);
}
else
{
logEx.Error("GetDeviceGroupList failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
//域也当做分组使用
string encodeDomainNo = CgwConst.IVS_SDK_ROOTGROUP_TAG + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + route.DomainCode;
CameraGroup domainGroup = new CameraGroup(encodeDomainNo, route.DomainName);
groupListTemp.Add(domainGroup);
List<string> pathDomainList = new List<string>();
RecursionGroupPath(route.DomainCode, ivsDomainRouteList,ref pathDomainList);
NodeRelation nodeDomainRelation = new NodeRelation(encodeDomainNo, pathDomainList, CgwMonitorManage.Common.NodeType.GROUP);
nodeRelationDicTemp.Add(encodeDomainNo, nodeDomainRelation);
foreach (KeyValuePair<string, IvsCameraGroup> ivsCameraGroupKeyValue in ivsCameraGroupDic)
{
IvsCameraGroup group = ivsCameraGroupKeyValue.Value;
string encodeGroupNo = group.GroupNo + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + group.DomainCode;
//添加组信息
CameraGroup cameraGroup = new CameraGroup(encodeGroupNo, group.GroupName);
groupListTemp.Add(cameraGroup);
List<string> pathList = new List<string>();
RecursionPath(group.GroupNo, ivsCameraGroupDic, ref pathList);
NodeRelation nodeRelation = new NodeRelation(encodeGroupNo, pathList, CgwMonitorManage.Common.NodeType.GROUP);
nodeRelationDicTemp.Add(encodeGroupNo, nodeRelation);
}
}
//添加所有组节点
nodeRelationListTemp.AddRange(nodeRelationDicTemp.Values);
List<IvsCamera> ivsCameraPageList = new List<IvsCamera>();
int cameraCount = 0;
logEx.Trace("Call ivsSdkClient.GetDeviceList");
//查询第一页记录，同时获取摄像头个数
result = this.ivsSdkClient.GetDeviceList(CgwConst.PAGE_FIRST_INDEX, CgwConst.PAGE_LAST_INDEX, out cameraCount, out ivsCameraPageList);
List<IvsCamera> ivsCameraLeaveList = new List<IvsCamera>();
//如果总记录大于一页的总记录数
if (cameraCount > CgwConst.PAGE_LAST_INDEX)
{
//一次将剩下所有记录查询出来
result = this.ivsSdkClient.GetDeviceList(CgwConst.PAGE_LAST_INDEX + 1, cameraCount, out cameraCount, out ivsCameraLeaveList);
}
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDeviceList success.Current group count:{0}", cameraCount);
ivsCameraPageList.AddRange(ivsCameraLeaveList);
}
else
{
logEx.Error("GetDeviceList failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
foreach (IvsCamera ivsCamera in ivsCameraPageList)
{
Camera camera = new Camera(ivsCamera.No, ivsCamera.Name);
camera.Status = ivsCamera.Status;
List<string> cameraPathList = new List<string>();
//string encodeGroupNo = ivsCamera.GroupNo + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + ivsCamera.DomainCode;//摄像头所属组号错误（与群组组号混淆了）。
string encodeGroupNo = ivsCamera.GroupNo;
if (nodeRelationDicTemp.ContainsKey(encodeGroupNo))
{
//如果自定义分组里面包含该摄像头的父节点，需要设置分组路径
cameraPathList.AddRange(nodeRelationDicTemp[encodeGroupNo].Path);
cameraPathList.Add(encodeGroupNo);
}
NodeRelation nodeRelation = new NodeRelation(camera.No, cameraPathList, CgwMonitorManage.Common.NodeType.CAMERA);
//解决问题单DTS2013080201001，规避因IVS服务器存在摄像头重复的bug导致融合网关异常的问题
if (!nodeRelationDicTemp.ContainsKey(camera.No))
{
cameraListTemp.Add(camera);
nodeRelationDicTemp.Add(camera.No, nodeRelation);
}
nodeRelationListTemp.Add(nodeRelation);
}
//nodeRelationListTemp.AddRange(nodeRelationDicTemp.Values);
DateTime dtStart = DateTime.Now;
DateTime dtNow = new DateTime();
while (!isGetDevicesFinish)
{
dtNow = DateTime.Now;
if ((dtNow - dtStart).TotalSeconds > refreshDeviceListOverTime)
{
isRefreshSucess = false;
return;
}
Thread.Sleep(1);
continue;
}
//将实时获取的值放到缓存
if (this.cameraOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
this.cameraList = cameraListTemp;
this.groupList = groupListTemp;
this.nodeRelationList = nodeRelationListTemp;
isRefreshSucess = true;
}
catch (Exception ex)
{
isRefreshSucess = false;
logEx.Error("Set the list to the buffer failed. ", ex.Message);
}
finally
{
this.cameraOperateLock.ExitWriteLock();
}
}
else
{
isRefreshSucess = false;
}
}
catch (System.Exception ex)
{
logEx.Error("GetAllCamerasMethod failed.Exception message:{0}", ex.Message);
isRefreshSucess = false;
}
}
/// <summary>
/// 停止预览
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <returns>成功返回0，失败返回错误码</returns>
public SmcErr StopReceiveVideo(string cameraNo)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.StopReceiveVideo({0}).", cameraNo);
SmcErr err = new CgwError();
//需要停止的预览句柄
int needToStopHandel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
needToStopHandel = this.cameraVideoHandeDic[cameraNo];
this.videoHandleCameraDic.Remove(needToStopHandel);
this.cameraVideoHandeDic.Remove(cameraNo);
}
else
{
//不存在，表示已经删除，不返回错误
//err.SetErrorNo(CgwError.STOP_RECEIVE_VIDEO_FAILED);
logEx.Warn("Stop Receive camera video data failed. Don't need to end the preview.Camera No:{0}.", cameraNo);
}
}
finally
{
this.handelOperateLock.ExitWriteLock();
}
}
//调用sdk的停止方法，放在handelOperateLock外面，防止长时间占用锁
if (needToStopHandel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
this.sdkClient.StopReceiveVideo(needToStopHandel);
}
logEx.Info("Stop Receive camera video data success.Camera No:{0},Handle:{1}.", cameraNo, needToStopHandel);
return err;
}
/// <summary>
/// 获取摄像头列表及分组信息
/// </summary>
/// <param name="fromMonitorSys">如果该值为true，则实时从监控平台获取,否则从融合网关缓存获取</param>
/// <param name="cameraList">摄像头列表</param>
/// <param name="groupList">组信息</param>
/// <param name="nodeRelationList">分组关系</param>
/// <returns></returns>
public SmcErr GetAllCameras(PagesParam pageparam, out List <Camera> cameraList, out List <CameraGroup> groupList, out List <NodeRelation> nodeRelationList, out PageInfo pageinfo, PlatformLicenseInfo licenseInfo = null)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: VideoMonitorManage.GetAllCameras().");
SmcErr err = new CgwError();
cameraList = new List <Camera>();
groupList = new List <CameraGroup>();
nodeRelationList = new List <NodeRelation>();
pageinfo = new PageInfo();
//copy 一份，防止长时间占用锁
Dictionary <string, IVideoMonitor> monitorsDictionaryTemp = null;
if (this.monitorsOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
monitorsDictionaryTemp = new Dictionary <string, IVideoMonitor>(monitorsDictionary);
}
catch (Exception e)
{
logEx.Error("Get all cameras failed.Execption message:{0}", e.Message);
}
finally
{
this.monitorsOperateLock.ExitReadLock();
}
}
if (monitorsDictionaryTemp == null)
{
//记录日志，获取*监控平台的摄像头列表失败
logEx.Error("Get all cameras from monitor failed.No any monitor.");
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
return(err);
}
//循环已加载的所有的监控平台，将所有摄像头和分组组成一个list返回
foreach (KeyValuePair <string, IVideoMonitor> monitor in monitorsDictionaryTemp)
{
//if ((monitor.Key == "ivs" || monitor.Key == "tiandy" || monitor.Key == "T28181IVS") && licenseInfo.IsMonitorPlatform == false)
//{
// logEx.Warn("GetAllCameras.smc license no right:{0}", monitor.Key);
// continue;
//}
//if (monitor.Key == "eLTE" && licenseInfo.IsEltePlatform == false)
//{
// logEx.Warn("GetAllCameras.smc license no right:{0}", monitor.Key);
// continue;
//}
IVideoMonitor videoMonitor = monitor.Value;
List <Camera> cameraListTemp;
List <CameraGroup> groupListTemp;
List <NodeRelation> nodeRelationListTemp;
err = videoMonitor.GetAllCameras(out cameraListTemp, out groupListTemp, out nodeRelationListTemp);
if (err.IsSuccess())
{
//摄像头编号加上监控平台唯一标识
foreach (Camera camera in cameraListTemp)
{
camera.No = EncodeNo(camera.No, monitor.Key);
cameraList.Add(camera);
}
//组编号加上监控平台唯一标识
foreach (CameraGroup cameraGroup in groupListTemp)
{
cameraGroup.No = EncodeNo(cameraGroup.No, monitor.Key);
groupList.Add(cameraGroup);
}
//节点关系编号加上监控平台唯一标识
foreach (NodeRelation nodeRelation in nodeRelationListTemp)
{
nodeRelation.No = EncodeNo(nodeRelation.No, monitor.Key);
List <string> pathListTemp = null;
if (null != nodeRelation.Path)
{
pathListTemp = new List <string>();
foreach (string path in nodeRelation.Path)
{
pathListTemp.Add(EncodeNo(path, monitor.Key));
}
}
nodeRelation.Path = pathListTemp;
nodeRelationList.Add(nodeRelation);
}
}
else
{
//记录日志，获取*监控平台的摄像头列表失败
logEx.Error("Get all cameras from monitor failed.Monitor id:{0} ,Error code:{1}", monitor.Key, err.ErrNo);
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
continue;
}
}
//2015/2/26 打印日志
logEx.Info("all List Counts.");
logEx.Info("cameraList:" + cameraList.Count);
logEx.Info("groupList:" + groupList.Count);
logEx.Info("nodeRelationList:" + nodeRelationList.Count);
#region 判断传递的pageParam信息的合法性
//计算cameraList、groupList、nodeRelationList中数据最多的列表长度
int maxNum = (cameraList.Count > groupList.Count) ? cameraList.Count : groupList.Count;
maxNum = maxNum > nodeRelationList.Count ? maxNum : nodeRelationList.Count;
pageinfo.TotalRecords = maxNum;
logEx.Info("GetAllCameras.pageparam.CurrentPage ={0},pageparam.NumberPerPage ={1}", pageparam.CurrentPage, pageparam.NumberPerPage);
if (pageparam.CurrentPage <= 0 || pageparam.NumberPerPage <= 0) //如果当前页数或者每页条数小于0，则提示错误
{
logEx.Error("The CurrentPage or NumberPerPage can not be smaller than zero ,the CurrentPage is {0},the NumberPerPage is {1}", pageparam.CurrentPage, pageparam.NumberPerPage);
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
cameraList = new List <Camera>();
groupList = new List <CameraGroup>();
nodeRelationList = new List <NodeRelation>();
pageinfo = new PageInfo();
return(err);
}
else if (maxNum == 0)
{
pageinfo = new PageInfo();
return(err);
}
else if (maxNum % pageparam.NumberPerPage != 0)
{
if (pageparam.CurrentPage > (pageinfo.TotalRecords / pageparam.NumberPerPage + 1)) //如果当前页数大于记录总页数，则提示错误
{
logEx.Error("The CurrentPage can not be more than The Total pageNum(odd),the CurrentPage is {0},the Total PageNum is {1}", pageparam.CurrentPage, pageinfo.TotalRecords / pageparam.NumberPerPage + 1);
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
cameraList = new List <Camera>();
groupList = new List <CameraGroup>();
nodeRelationList = new List <NodeRelation>();
pageinfo = new PageInfo();
return(err);
}
}
else
{
if (pageparam.CurrentPage > (pageinfo.TotalRecords / pageparam.NumberPerPage)) //如果当前页数大于记录总页数，则提示错误
{
logEx.Error("The CurrentPage can not be more than The Total pageNum(even),the CurrentPage is {0},the Total PageNum is {1}", pageparam.CurrentPage, pageinfo.TotalRecords / pageparam.NumberPerPage);
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
cameraList = new List <Camera>();
groupList = new List <CameraGroup>();
nodeRelationList = new List <NodeRelation>();
pageinfo = new PageInfo();
return(err);
}
}
#endregion
#region 设置返回项PageInfo的值
pageinfo.TotalRecords = maxNum;
pageinfo.CurrentPage = pageparam.CurrentPage;
if (pageinfo.TotalRecords % pageparam.NumberPerPage != 0)
{
pageinfo.TotalPages = pageinfo.TotalRecords / pageparam.NumberPerPage + 1;
}
else
{
pageinfo.TotalPages = pageinfo.TotalRecords / pageparam.NumberPerPage;
}
#endregion
#region 分割数据列表
List <Camera> CameraListTemp = new List <Camera>();;
List <CameraGroup> CameraGroupTemp = new List <CameraGroup>();;
List <NodeRelation> CamerNodeRelationaListTemp = new List <NodeRelation>();
int BeforeCurrentPageNum = (pageparam.CurrentPage - 1) * pageparam.NumberPerPage; //vsd传递的当前页（PageParam.CurrentPage）之前的数据总数
//cameraList ↓↓
if (null != cameraList && cameraList.Count > 0)
{
for (int i = BeforeCurrentPageNum; i < BeforeCurrentPageNum + pageparam.NumberPerPage; i++) //i从0开始
{
if (i > cameraList.Count - 1)
{
break;
}
CameraListTemp.Add(cameraList[i]);
}
cameraList = CameraListTemp;
}
//groupList↓↓
if (null != groupList && groupList.Count > 0)
{
for (int i = BeforeCurrentPageNum; i < BeforeCurrentPageNum + pageparam.NumberPerPage; i++) //将请求页中包含的数据读取出来，并赋值给groupList
{
if (i > groupList.Count - 1)
{
break;
}
CameraGroupTemp.Add(groupList[i]);
}
groupList = CameraGroupTemp;
}
//nodeRelationList↓↓
if (null != nodeRelationList && nodeRelationList.Count > 0)
{
for (int i = BeforeCurrentPageNum; i < BeforeCurrentPageNum + pageparam.NumberPerPage; i++) //将请求页中包含的数据读取出来，并赋值给nodeRelationList
{
if (i > nodeRelationList.Count - 1)
{
break;
}
CamerNodeRelationaListTemp.Add(nodeRelationList[i]);
}
nodeRelationList = CamerNodeRelationaListTemp;
}
#endregion
logEx.Info("Get all cameras success.");
//特殊处理，监控平台统一返回成功，做轮询处理
err.SetErrorNo(SmcErr.SMC_ERR_SUCCESS);
return(err);
}
/// <summary>
/// 初始化T28181监控平台
/// </summary>
/// <param name="monitorConfigElement">监控平台配置节点</param>
/// <returns></returns>
public SmcErr Load(System.Xml.XmlElement monitorConfigElement)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: T28181VideoMonitor.Load().");
SmcErr err = new CgwError();
try
{
//解析xml节点，获取所需参数
string queryDeviceTimeOut = string.Empty;
monitorId = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.ID_TAG);
domain = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.IP_TAG);
sipPort = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.SIP_PORT);
deviceID = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.Device_ID);
username = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.USER_TAG);
password = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PASSWORD_TAG);
localPort = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.LOCAL_PORT);
queryDeviceTimeOut = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.QueryDeviceTimeOut);
//检测配置文件是否有错误
int iSipPort = 0;
bool bRet = int.TryParse(sipPort, out iSipPort);
if (bRet == false)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load T28181 monitor failed.Execption sipPort:{0}.", sipPort);
return(err);
}
int iLocalPort = 0;
bRet = int.TryParse(localPort, out iLocalPort);
if (bRet == false)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load T28181 monitor failed.Execption localPort:{0}.", localPort);
return(err);
}
bRet = int.TryParse(queryDeviceTimeOut, out iQueryDeviceTimeOut);
//转为毫秒
iQueryDeviceTimeOut *= 1000;
if (bRet == false)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load T28181 monitor failed.Execption QueryDeviceTimeOut:{0}.", iQueryDeviceTimeOut);
return(err);
}
//开始连接、注册Sip服务器
StartConnectRegisterSip(domain, iSipPort, iLocalPort, username, password);
//开始查询设备列表
Thread th = new Thread(new ThreadStart(()
=>
{
GetAllCamerasTimer(null, null);
}));
th.Start();
//启动定时器
updateCameraTimer.Start();
}
catch (Exception e)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load T28181 monitor failed.Execption message:{0}.", e.Message);
return(err);
}
logEx.Info("Load T28181 monitor success.Monitor id:{0}.", this.monitorId);
return(err);
}
/// <summary>
/// 创建监控平台实例
/// </summary>
/// <param name="monitorElement"></param>
/// <returns></returns>
private SmcErr CreateMonitor(string monitorId, string className, out IVideoMonitor videoMonitor)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: VideoMonitorManage.CreateMonitor().");
SmcErr err = new CgwError();
videoMonitor = null;
if (this.monitorsOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (monitorsDictionary.ContainsKey(monitorId))
{
//监控平台的id重复
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID_ID_EXIST);
logEx.Error("Monitor id has been exist. Monitor id:{0}.", monitorId);
return(err);
}
}
catch (Exception e)
{
logEx.Error("CreateMonitor failed..Execption message:{0}", e.Message);
}
finally
{
this.monitorsOperateLock.ExitWriteLock();
}
}
Type monitorType = Type.GetType(className);
if (monitorType == null)
{
//class不合法
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID_CLASS_INVALID);
logEx.Error("The class of Monitor is invalid. Class:{0}, Monitor id:{1}.", className, monitorId);
return(err);
}
try
{
//create instance
logEx.Info("VideoMonitorManage.className = {0}", className);
if (className == "CgwMonitorManage.eLTE.eLTEVideoMonitor,CgwMonitorManage.eLTE")
{
//eLTE dll放在eLTeSDK目录下，否则跟ivs DLL冲突
string strPath = System.AppDomain.CurrentDomain.BaseDirectory;
System.Reflection.Assembly assembly = System.Reflection.Assembly.LoadFrom(strPath + @"eLTeSDK\CgwMonitorManage.eLTE.dll");
Type[] types = assembly.GetTypes();
if (types.Length > 0)
{
monitorType = types.First((x) => x.FullName == "CgwMonitorManage.eLTE.eLTEVideoMonitor");
}
}
else if (className == "CgwMonitorManage.Ivs.IvsVideoMonitor,CgwMonitorManage.Ivs")
{
string strPath = System.AppDomain.CurrentDomain.BaseDirectory;
System.Reflection.Assembly assembly = System.Reflection.Assembly.LoadFrom(strPath + @"IVSSDK\CgwMonitorManage.Ivs.dll");
Type[] types = assembly.GetTypes();
if (types.Length > 0)
{
monitorType = types.First((x) => x.FullName == "CgwMonitorManage.Ivs.IvsVideoMonitor");
}
}
logEx.Info("VideoMonitorManage.monitorType = {0}", monitorType);
videoMonitor = Activator.CreateInstance(monitorType) as CgwMonitorManage.Common.IVideoMonitor;
}
catch (Exception e)
{
//无法加载指定的类
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID_CLASS_INVALID);
logEx.Error("The class of Monitor is invalid. May be not as IVideoMonitor. Class:{0}, Monitor id:{1},Exception message:{2}.",
className, monitorId, e.Message);
return(err);
}
if (videoMonitor == null)
{
//无法加载指定的类
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID_CLASS_INVALID);
logEx.Error("The class of Monitor is invalid. May be not as IVideoMonitor. Class:{0}, Monitor id:{1}.", className, monitorId);
return(err);
}
return(err);
}
/// <summary>
/// 开启服务函数
/// </summary>
static void StartService()
{
MonitorManageService inist = MonitorManageService.Instance();
ServiceHost host = new ServiceHost(inist);
inist.SetHost(host);
host.Opened += delegate
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
Thread dbConnectionThread = new Thread(new ThreadStart(LoadMonitorTimer_Elapsed));
dbConnectionThread.Start();
logEx.Info("Enter: Start CgwMonitorManage.Service");
};
host.Open();
ServiceBase.Run(inist);
}
/// <summary>
/// 获取摄像头列表及分组信息
/// </summary>
/// <param name="fromMonitorSys">如果该值为true，则实时从监控平台获取,否则从融合网关缓存获取</param>
/// <param name="cameraList">摄像头列表</param>
/// <param name="groupList">组信息</param>
/// <param name="nodeRelationListT">分组关系</param>
/// <returns></returns>
public SmcErr GetAllCameras(out List<Camera> cameraList, out List<CameraGroup> groupList, out List<NodeRelation> nodeRelationListT)
{
monitorManageServiceGetCameraList.Stop();
isGetDevicesFinish = false;
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.GetAllCameras().");
SmcErr err = new CgwError();
cameraList = new List<Camera>();
groupList = new List<CameraGroup>();
nodeRelationListT = new List<NodeRelation>();
if (this.cameraOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
#region 深度克隆数据
foreach (KeyValuePair<string, TiandyCamera> tiandyCameraKeyValue in this.tiandyCameraDictionary)
{
TiandyCamera tiandyCamera = tiandyCameraKeyValue.Value;
//从缓存获取
Camera camera = new Camera(tiandyCamera.No, tiandyCamera.Name);
cameraList.Add(camera);
}
foreach (KeyValuePair<string, CameraGroup> groupDicKeyValue in this.groupDic)
{
CameraGroup cameraGroupTemp = new CameraGroup(groupDicKeyValue.Value.No, groupDicKeyValue.Value.Name);
groupList.Add(cameraGroupTemp);
}
foreach (NodeRelation nodeRelation in this.nodeRelationList)
{
NodeRelation nodeRelationTemp = new NodeRelation(nodeRelation.No,
nodeRelation.Path,
nodeRelation.Type);
nodeRelationListT.Add(nodeRelationTemp);
}
#endregion
}
catch (Exception e)
{
err.SetErrorNo(CgwError.GET_ALL_CAMERAS_FAILED);
logEx.Error("Get all cameras failed.Execption message:{0}", e.Message);
return err;
}
finally
{
this.cameraOperateLock.ExitReadLock();
}
}
monitorManageServiceGetCameraList.Start();
logEx.Info("Get all cameras success.");
return err;
}
/// <summary>
/// 登陆http服务接口
/// </summary>
/// <returns>成功返回登录信息对象，失败返回null</returns>
public LoginInfo Login()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyHttpClient.Login().");
LoginInfo loginInfo = null;
//设置访问天地伟业登陆接口的uri
string requestUrl = string.Format(
"{0}/LogIn.jsp?UserName={1}&Password={2}&LoginType=1",
this.serverUrl,
this.user,
this.pwd);
//日志不能记密码，单独处理
string logString = string.Format(
"{0}/LogIn.jsp?UserName={1}&Password=******&LoginType=1",
this.serverUrl,
this.user);
//调用HTTP接口获取json字符串
string loginInfoString = CallHttpInterface(requestUrl);
if (!string.IsNullOrEmpty(loginInfoString))
{
loginInfo = JsonUtil.ParseLoginInfo(loginInfoString);
if (loginInfo == null)
{
logEx.Error("Login to http server failed.Url:{0}", logString);
//返回失败设置错误码
}
logEx.Info("Login to http server success.Url:{0}", logString);
}
else
{
//如果字符串为空，说明调用不成功
logEx.Error("Login to http server failed.Url:{0}", logString);
loginInfo = null;
}
return loginInfo;
}
/// <summary>
/// 初始化天地伟业监控平台
/// </summary>
/// <param name="monitorConfigElement">监控平台配置节点</param>
/// <returns></returns>
public SmcErr Load(XmlElement monitorConfigElement)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.Load().");
SmcErr err = new CgwError();
string userLevel = "";
//解析xml节点，获取所需参数
try
{
#region Tiandy视频监控平台（Easy7）连接信息
this.monitorId = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.ID_TAG);
userLevel = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PTZCONTROLLEVEL_TAG);
string httpUser = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PLATFORM_USER_TAG);
string httpPassword = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PLATFORM_PASSWORD_TAG);
string httpUrl = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.PLATFORM_URL_TAG);
string mediaServerId = CommonFunction.GetSingleNodeValue(monitorConfigElement, CgwConst.MEDIASERVER_SERVERID_TAG);
#endregion
this.httpClient = new TiandyHttpClient(httpUrl, httpUser, httpPassword);
//使用线程轮询加载监控平台
Thread loaderThread = new Thread(LoaderThread);
loaderThread.Start(mediaServerId);
}
catch (Exception e)
{
err.SetErrorNo(CgwError.MONITOR_CONFIG_FILE_INVALID);
logEx.Error("Load Tiandy monitor failed.Execption message:{0}.", e.Message);
return err;
}
this.sdkClient = new TiandySdkClient();
//如果控制级别配置错误，只记录错误日志，不向外报错
try
{
this.sdkClient.PtzControlLevel = int.Parse(userLevel);
}
catch (Exception e)
{
logEx.Error("Ptz Control Level is invalid.Execption message:{0}.", e.Message);
this.sdkClient.PtzControlLevel = CgwConst.PTZ_CONTROL_LEVEL;
}
logEx.Info("Load video monitor success.Monitor id:{0}.", this.monitorId);
return err;
}
/// <summary>
/// 获取设备树
/// </summary>
/// <param name="requestUrl"></param>
/// <returns>成功返回对象列表，失败返回null</returns>
private List<Resource> GetResourceTree(String requestUrl)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
List<Resource> resources = null;
//调用HTTP接口获取json字符串
string resourceString = CallHttpInterface(requestUrl);
if (!string.IsNullOrEmpty(resourceString))
{
resources = JsonUtil.ParseResource(resourceString);
if (resources == null)
{
logEx.Error("Call function GetResourceTree() failed.");
}
else
{
logEx.Info("Call function GetResourceTree() success.");
}
}
else
{
//如果字符串为空，说明调用不成功
resources = null;
logEx.Error("Call function GetResourceTree() failed.");
}
return resources;
}
/// <summary>
/// 设置麦克风状态
/// </summary>
/// <param name="cameraNo"></param>
/// <param name="isOn">麦克风是否开启</param>
/// <returns></returns>
public SmcErr SetMic(string cameraNo, bool isOn)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.SetMic({0}，{1}).", cameraNo, isOn);
SmcErr err = new CgwError();
if (this.micOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.cameraMicStatusDic.ContainsKey(cameraNo))
{
this.cameraMicStatusDic[cameraNo] = isOn;
}
else
{
this.cameraMicStatusDic.Add(cameraNo, isOn);
}
}
finally
{
this.micOperateLock.ExitWriteLock();
}
}
logEx.Info("Set Mic status success.Camera no:{0}，isOn:{1}).", cameraNo, isOn);
return err;
}
/// <summary>
/// 监控平台加载器，轮询加载，直到成功
/// </summary>
/// <param name="loginInfo"></param>
private void LoginThread(Object loginInfoObj)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.LoginThread().");
try
{
IvsLoginInfo loginInfo = loginInfoObj as IvsLoginInfo;
while (!loadResult)
{
if (loginInfo == null)
{
logEx.Error("loginInfoObj is Null.");
return;
}
//等待ivs sdk事件回调结束，再调用sdk接口，否则调用失败
Thread.Sleep(1000);
logEx.Trace("Call ivsSdkClient.Login({0},{1},{2},******).", loginInfo.Ip, loginInfo.Port, loginInfo.User);
//登陆
int result = this.ivsSdkClient.Login(loginInfo.Ip, loginInfo.Port, loginInfo.User, loginInfo.Pwd);
if (result != CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Error("Login to ivs monitor failed.Monitor id:{0}.ip:{1}, port:{2}, user:{3}.ivs sdk error code:{4}.",
this.monitorId, loginInfo.Ip, loginInfo.Port, loginInfo.User, result);
//登陆失败，等待1分钟后再次尝试登陆
Thread.Sleep(CgwConst.RELOAD_MONITOR_WAIT_TIME);
loadResult = false;
continue;
}
else
{
logEx.Info("Login to ivs monitor success.Monitor id:{0}.ip:{1}, port:{2}, user:{3}.",
this.monitorId, loginInfo.Ip, loginInfo.Port, loginInfo.User);
loadResult = true;
}
this.GetAllCamerasTimer(null, null);
//启动定时器
this.updateCameraTimer.Start();
}
}
catch (System.Exception ex)
{
logEx.Error("Load IVS monitor failed. Exception message:{0}.", ex.Message);
}
}
/// <summary>
/// 停止云台控制，摄像头控制
/// </summary>
/// <param name="cameraNo">摄像头编号</param>
/// <param name="ptzCommand">命令类型</param>
/// <returns></returns>
public SmcErr StopControlPtz(string cameraNo, PtzCommandType ptzCommand)
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.StopControlPtz({0}).", cameraNo);
SmcErr err = new CgwError();
int handel = CgwConst.START_RECEIVE_VIDEO_DATA_FAILED;
if (this.handelOperateLock.TryEnterReadLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
if (this.cameraVideoHandeDic.ContainsKey(cameraNo))
{
handel = this.cameraVideoHandeDic[cameraNo];
}
else
{
logEx.Warn("The camera was not Preview.Don't need to end the control.Camera No:{0}.", cameraNo);
}
}
finally
{
this.handelOperateLock.ExitReadLock();
}
}
if (handel != CgwConst.START_RECEIVE_VIDEO_DATA_FAILED)
{
Client_PTZ_Command client_ptz_command = new Client_PTZ_Command();
client_ptz_command.start = false;
//将ptz命令转换成天地伟业的命令
string name = Enum.GetName(typeof(PtzCommandType), ptzCommand);
if (Enum.IsDefined(typeof(TiandyPtzCommandType), name))
{
TiandyPtzCommandType tiandyPtzCommandType = (TiandyPtzCommandType)Enum.Parse(typeof(TiandyPtzCommandType), name);
client_ptz_command.cmd = (int)tiandyPtzCommandType;
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("The tiandy monitor is not support the command.ptzCommand:{0}.", ptzCommand);
return err;
}
bool result = this.sdkClient.ControlPtz(handel, client_ptz_command);
if (result)
{
logEx.Info("Stop control camera ptz success.Camera No:{0}.", cameraNo);
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Stop control camera ptz failed.Camera No:{0}.", cameraNo);
}
}
else
{
err.SetErrorNo(CgwError.STOP_CONTROL_PTZ_FAILED);
logEx.Error("Handel is not found. Stop control camera ptz failed. Camera No:{0}.", cameraNo);
return err;
}
return err;
}
/// <summary>
/// 释放所有实况通道,释放NETSOURCE资源
/// </summary>
public IVS_NETSOURCE_RESULT IVS_NETSOURCE_UnInit()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: SipStackAdapter.IVS_NETSOURCE_UnInit.");
//IVS_NETSOURCE_RESULT iRet = IVS_NETSOURCE_RESULT.FAILURE;
IVS_NETSOURCE_RESULT iRet = IVS_NETSOURCE_RESULT.SUCCESS;
try
{
foreach (KeyValuePair<UInt32, int> kvp in channelResponseIDDic)
{
UInt32 channel = kvp.Key;
iRet = NetSourcedInterface.IVS_NETSOURCE_CloseNetStream(channel);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.IVS_NETSOURCE_CloseNetStream channelResponseIDDic = {0}.", channel);
//注销return，避免返回，不实现IVS_NETSOURCE_UnInit
//return iRet;
}
iRet = NetSourcedInterface.IVS_NETSOURCE_FreeChannel(channel);
if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
{
logEx.Error("SipStackAdapter.IVS_NETSOURCE_FreeChannel channelResponseIDDic = {0}.", channel);
//注销return，避免返回，不实现IVS_NETSOURCE_UnInit
//return iRet;
}
}
//iRet = NetSourcedInterface.IVS_NETSOURCE_UnInit();
//if (iRet != IVS_NETSOURCE_RESULT.SUCCESS)
//{
// logEx.Error("SipStackAdapter.IVS_NETSOURCE_UnInit failed.");
//}
NetSourcedInterface.IVS_NETSOURCE_UnInit();
logEx.Info("Leave: SipStackAdapter.IVS_NETSOURCE_UnInit.");
}
catch (System.Exception ex)
{
logEx.Error("SipStackAdapter.IVS_NETSOURCE_UnInit Error = {0}.", ex.ToString());
iRet = IVS_NETSOURCE_RESULT.FAILURE;
}
return iRet;
}
/// <summary>
/// 注销天地伟业监控平台资源
/// </summary>
/// <returns></returns>
public SmcErr Unload()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: TiandyVideoMonitor.Unload().");
SmcErr err = new CgwError();
//停止定时器
this.updateCameraTimer.Stop();
if (this.sdkClient.Unload())
{
logEx.Info("Unload video monitor success.Monitor id:{0}.", this.monitorId);
}
else
{
err.SetErrorNo(CgwError.UNLOAD_MONITOR_FAILED);
logEx.Error("Unload video monitor failed.Monitor id:{0}.", this.monitorId);
}
return err;
}
/// <summary>
/// 获取摄像头列表及分组信息
/// </summary>
private void GetAllCamerasMethod()
{
NLogEx.LoggerEx logEx = new NLogEx.LoggerEx(log);
logEx.Trace("Enter: IvsVideoMonitor.GetAllCamerasMethod().");
try
{
//1、获取系统中所有的域
List <IvsDomainRoute> ivsDomainRouteList;
logEx.Trace("Call ivsSdkClient.GetDomainRoute().");
int result = this.ivsSdkClient.GetDomainRoute(out ivsDomainRouteList);
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDomainRoute success.List count:{0}", ivsDomainRouteList.Count);
}
else
{
logEx.Error("GetDomainRoute failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
List <Camera> cameraListTemp = new List <Camera>();
List <CameraGroup> groupListTemp = new List <CameraGroup>();
List <NodeRelation> nodeRelationListTemp = new List <NodeRelation>();
Dictionary <string, NodeRelation> nodeRelationDicTemp = new Dictionary <string, NodeRelation>();
foreach (IvsDomainRoute route in ivsDomainRouteList)
{
//加上此判断条件的话，子域将不会作查目录处理，不合理，故注释掉
//if (route.ParentDomain != "")
//{
// continue;
//}
Dictionary <string, IvsCameraGroup> ivsCameraGroupDic;
logEx.Trace("Call ivsSdkClient.GetDeviceGroupList({0},{1}，out groupCount, out ivsCameraGroupDic).",
route.DomainCode,
CgwConst.IVS_SDK_ROOTGROUP_TAG);
result = this.ivsSdkClient.GetDeviceGroupList(route.DomainCode,
CgwConst.IVS_SDK_ROOTGROUP_TAG,
out ivsCameraGroupDic);
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDeviceGroupList success.Current group count:{0}", ivsCameraGroupDic.Count);
}
else
{
logEx.Error("GetDeviceGroupList failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
//域也当做分组使用
string encodeDomainNo = CgwConst.IVS_SDK_ROOTGROUP_TAG + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + route.DomainCode;
CameraGroup domainGroup = new CameraGroup(encodeDomainNo, route.DomainName);
groupListTemp.Add(domainGroup);
List <string> pathDomainList = new List <string>();
RecursionGroupPath(route.DomainCode, ivsDomainRouteList, ref pathDomainList);
NodeRelation nodeDomainRelation = new NodeRelation(encodeDomainNo, pathDomainList, CgwMonitorManage.Common.NodeType.GROUP);
nodeRelationDicTemp.Add(encodeDomainNo, nodeDomainRelation);
foreach (KeyValuePair <string, IvsCameraGroup> ivsCameraGroupKeyValue in ivsCameraGroupDic)
{
IvsCameraGroup group = ivsCameraGroupKeyValue.Value;
string encodeGroupNo = group.GroupNo + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + group.DomainCode;
//添加组信息
CameraGroup cameraGroup = new CameraGroup(encodeGroupNo, group.GroupName);
groupListTemp.Add(cameraGroup);
List <string> pathList = new List <string>();
RecursionPath(group.GroupNo, ivsCameraGroupDic, ref pathList);
NodeRelation nodeRelation = new NodeRelation(encodeGroupNo, pathList, CgwMonitorManage.Common.NodeType.GROUP);
nodeRelationDicTemp.Add(encodeGroupNo, nodeRelation);
}
}
//添加所有组节点
nodeRelationListTemp.AddRange(nodeRelationDicTemp.Values);
List <IvsCamera> ivsCameraPageList = new List <IvsCamera>();
int cameraCount = 0;
logEx.Trace("Call ivsSdkClient.GetDeviceList");
//查询第一页记录，同时获取摄像头个数
result = this.ivsSdkClient.GetDeviceList(CgwConst.PAGE_FIRST_INDEX, CgwConst.PAGE_LAST_INDEX, out cameraCount, out ivsCameraPageList);
List <IvsCamera> ivsCameraLeaveList = new List <IvsCamera>();
//如果总记录大于一页的总记录数
if (cameraCount > CgwConst.PAGE_LAST_INDEX)
{
//一次将剩下所有记录查询出来
result = this.ivsSdkClient.GetDeviceList(CgwConst.PAGE_LAST_INDEX + 1, cameraCount, out cameraCount, out ivsCameraLeaveList);
}
if (result == CgwConst.IVS_SDK_SUCCESS_TAG)
{
logEx.Info("GetDeviceList success.Current group count:{0}", cameraCount);
ivsCameraPageList.AddRange(ivsCameraLeaveList);
}
else
{
logEx.Error("GetDeviceList failed.Ivs sdk error code:{0}", result);
ClearCamera();
isRefreshSucess = false;
return;
}
foreach (IvsCamera ivsCamera in ivsCameraPageList)
{
Camera camera = new Camera(ivsCamera.No, ivsCamera.Name);
camera.Status = ivsCamera.Status;
List <string> cameraPathList = new List <string>();
//string encodeGroupNo = ivsCamera.GroupNo + CgwConst.IVS_SDK_DOMAINCODE_SEPARATOR_TAG + ivsCamera.DomainCode;//摄像头所属组号错误（与群组组号混淆了）。
string encodeGroupNo = ivsCamera.GroupNo;
if (nodeRelationDicTemp.ContainsKey(encodeGroupNo))
{
//如果自定义分组里面包含该摄像头的父节点，需要设置分组路径
cameraPathList.AddRange(nodeRelationDicTemp[encodeGroupNo].Path);
cameraPathList.Add(encodeGroupNo);
}
NodeRelation nodeRelation = new NodeRelation(camera.No, cameraPathList, CgwMonitorManage.Common.NodeType.CAMERA);
//解决问题单DTS2013080201001，规避因IVS服务器存在摄像头重复的bug导致融合网关异常的问题
if (!nodeRelationDicTemp.ContainsKey(camera.No))
{
cameraListTemp.Add(camera);
nodeRelationDicTemp.Add(camera.No, nodeRelation);
}
nodeRelationListTemp.Add(nodeRelation);
}
//nodeRelationListTemp.AddRange(nodeRelationDicTemp.Values);
DateTime dtStart = DateTime.Now;
DateTime dtNow = new DateTime();
while (!isGetDevicesFinish)
{
dtNow = DateTime.Now;
if ((dtNow - dtStart).TotalSeconds > refreshDeviceListOverTime)
{
isRefreshSucess = false;
return;
}
Thread.Sleep(1);
continue;
}
//将实时获取的值放到缓存
if (this.cameraOperateLock.TryEnterWriteLock(CgwConst.ENTER_LOCK_WAIT_TIME))
{
try
{
this.cameraList = cameraListTemp;
this.groupList = groupListTemp;
this.nodeRelationList = nodeRelationListTemp;
isRefreshSucess = true;
}
catch (Exception ex)
{
isRefreshSucess = false;
logEx.Error("Set the list to the buffer failed. ", ex.Message);
}
finally
{
this.cameraOperateLock.ExitWriteLock();
}
}
else
{
isRefreshSucess = false;
}
}
catch (System.Exception ex)
{
logEx.Error("GetAllCamerasMethod failed.Exception message:{0}", ex.Message);
isRefreshSucess = false;
}
}
