public override void Update()
{
base.begin_update();
int start_timestamp = this.CurrentInputTimestamp;
if (MeshSource == null)
{
throw new Exception("ReprojectOp: must set valid MeshSource to compute!");
}
try {
if (ReprojectMode == ReprojectModes.SmoothSurfaceFlow)
{
ResultMesh = compute_smooth();
}
else if (ReprojectMode == ReprojectModes.SharpEdgesFlow)
{
ResultMesh = compute_sharp_edge_flow();
}
else
{
ResultMesh = compute_bounded_distance();
}
base.complete_update();
} catch (Exception e) {
PostOnOperatorException(e);
ResultMesh = base.make_failure_output(MeshSource.GetDMeshUnsafe());
base.complete_update();
}
}
public virtual void Update()
{
base.begin_update();
int start_timestamp = this.CurrentInputTimestamp;
if (MeshSource == null)
{
throw new Exception("GenerateClosedMeshOp: must set valid MeshSource to compute!");
}
try {
DMesh3 inputmesh = MeshSource.GetDMeshUnsafe();
ISpatial inputSpatial = MeshSource.HasSpatial ? MeshSource.GetSpatial() : null;
DMeshAABBTree3 spatial = (inputSpatial != null && inputSpatial is DMeshAABBTree3) ?
inputSpatial as DMeshAABBTree3 : get_cached_spatial(inputmesh);
DMesh3 meshIn = new DMesh3(inputmesh);
MeshRepairOrientation repair = new MeshRepairOrientation(meshIn, spatial);
repair.OrientComponents();
repair.SolveGlobalOrientation();
if (invert_result)
{
meshIn.ReverseOrientation(true);
}
ResultMesh = meshIn;
base.complete_update();
} catch (Exception e) {
PostOnOperatorException(e);
ResultMesh = base.make_failure_output(MeshSource.GetDMeshUnsafe());
base.complete_update();
}
}
public virtual void Update()
{
base.begin_update();
int start_timestamp = this.CurrentInputTimestamp;
if (MeshSource == null)
{
throw new Exception("GenerateClosedMeshOp: must set valid MeshSource to compute!");
}
try {
DMesh3 inputmesh = MeshSource.GetDMeshUnsafe();
DMesh3 meshIn = new DMesh3(inputmesh);
MeshAutoRepair repair = new MeshAutoRepair(meshIn);
repair.RemoveMode = (MeshAutoRepair.RemoveModes)(int) remove_inside_mode;
repair.MinEdgeLengthTol = min_edge_length;
repair.ErosionIterations = erosion_iters;
repair.Progress = new ProgressCancel(is_invalidated);
bool bOK = repair.Apply();
if (bOK && invert_result)
{
meshIn.ReverseOrientation(true);
}
if (is_invalidated())
{
meshIn = null;
}
if (bOK)
{
ResultMesh = meshIn;
}
else
{
ResultMesh = base.make_failure_output(inputmesh);
}
base.complete_update();
} catch (Exception e) {
PostOnOperatorException(e);
ResultMesh = base.make_failure_output(MeshSource.GetDMeshUnsafe());
base.complete_update();
}
}
public virtual void Update()
{
base.begin_update();
int start_timestamp = this.LastUpdateTimestamp;
if (MeshSource == null)
{
throw new Exception("TrimMeshFromCurveOp: must set valid MeshSource to compute!");
}
if (CurveSource == null)
{
throw new Exception("TrimMeshFromCurveOp: must set valid CurveSource to compute!");
}
LocalProfiler p = new LocalProfiler();
p.Start("offset");
bool is_preview = false;
// cache copy of input mesh and spatial DS
DMesh3 inputMesh = MeshSource.GetDMeshUnsafe();
if (cachedInputMesh == null || input_mesh_modified_counter != input_mesh_cache_timestamp)
{
cachedInputMesh = new DMesh3(inputMesh, false, MeshComponents.All);
cachedInputMeshSpatial = new DMeshAABBTree3(cachedInputMesh, true);
input_mesh_cache_timestamp = input_mesh_modified_counter;
}
// have to cache this in case it changes during compute
// TODO: should be caching all parameters!
cachedInputsTransform = InputsTransform;
// discard caches
// TODO: we still have a race condition, because we could get an invalidate() between
// begin_update() above and here. In that case we will be losing the cache discard flag.
// Should be using update timestamp...
if (pending_cache_discard)
{
cached_sdf_max_offset = 0;
cached_inner_sdf_offset = 0;
cached_outer_sdf_offset = 0;
pending_cache_discard = true;
}
try {
//compute_offset_meshes();
compute_offset_meshes_nosdf();
} catch {
// we will do nothing here, let later failures handle it
}
p.Stop("offset");
p.Start("trim");
// trimmed mesh doesn't change unless curve changed...
try {
compute_trimmed_mesh();
} catch {
set_failure_output(null);
goto failed;
}
p.Stop("trim");
p.Start("inner_wall");
try {
compute_inner_wall();
} catch {
set_failure_output(null);
goto failed;
}
p.Stop("inner_wall");
p.Start("outer_wall");
try {
compute_outer_wall();
} catch {
set_failure_output(InnerMesh);
goto failed;
}
p.Stop("outer_wall");
p.Start("base");
is_preview = (this.CurrentInputTimestamp != start_timestamp);
try {
DMesh3 baseMesh = new DMesh3(SocketMesh);
bool base_failed = false;
do_base(baseMesh, is_preview, out base_failed);
if (base_failed)
{
set_failure_output(SocketMesh);
goto failed;
}
else
{
SocketMesh = baseMesh;
}
} catch (Exception e) {
set_failure_output(SocketMesh);
goto failed;
}
p.Stop("base");
f3.DebugUtil.Log(p.AllTimes());
Vector3f setColor = is_preview ? PartialSocketVertexColor : SocketVertexColor;
foreach (int vid in SocketMesh.VertexIndices())
{
SocketMesh.SetVertexColor(vid, setColor);
}
ResultMesh = SocketMesh;
last_result_status = (is_preview) ? ResultStatus.PreviewResult : ResultStatus.FullResult;
failed:
base.complete_update();
}
protected virtual DMesh3 compute_sharp_edge_flow()
{
DMesh3 sourceMesh = MeshSource.GetDMeshUnsafe();
ISpatial inputSpatial = MeshSource.GetSpatial();
DMesh3 targetMesh = TargetSource.GetDMeshUnsafe();
ISpatial targetSpatial = TargetSource.GetSpatial();
DMesh3 meshIn = new DMesh3(sourceMesh);
if (is_invalidated())
{
return(null);
}
RemesherPro remesher = new RemesherPro(meshIn);
remesher.SetTargetEdgeLength(TargetEdgeLength);
remesher.PreventNormalFlips = this.PreventNormalFlips;
remesher.EnableFlips = this.EnableFlips;
remesher.EnableSplits = this.EnableSplits;
remesher.EnableCollapses = this.EnableCollapses;
remesher.EnableSmoothing = this.EnableSmoothing;
remesher.SmoothSpeedT = this.SmoothingSpeed;
TransformedMeshProjectionTarget target =
new TransformedMeshProjectionTarget(targetMesh, targetSpatial)
{
SourceToTargetXForm = source_to_target,
TargetToSourceXForm = target_to_source
};
remesher.SetProjectionTarget(target);
if (sourceMesh.CachedIsClosed == false)
{
if (remesher.Constraints == null)
{
remesher.SetExternalConstraints(new MeshConstraints());
}
if (BoundaryMode == BoundaryModes.FreeBoundaries)
{
MeshConstraintUtil.PreserveBoundaryLoops(remesher.Constraints, meshIn);
}
else if (BoundaryMode == BoundaryModes.FixedBoundaries)
{
MeshConstraintUtil.FixAllBoundaryEdges(remesher.Constraints, meshIn);
}
else if (BoundaryMode == BoundaryModes.ConstrainedBoundaries)
{
MeshConstraintUtil.FixAllBoundaryEdges_AllowSplit(remesher.Constraints, meshIn, 0);
}
}
if (is_invalidated())
{
return(null);
}
remesher.Progress = new ProgressCancel(is_invalidated);
remesher.SharpEdgeReprojectionRemesh(RemeshRounds, ProjectionRounds);
if (is_invalidated())
{
return(null);
}
return(meshIn);
}
protected virtual DMesh3 compute_bounded_distance()
{
DMesh3 sourceMesh = MeshSource.GetDMeshUnsafe();
ISpatial inputSpatial = MeshSource.GetSpatial();
DMesh3 targetMesh = TargetSource.GetDMeshUnsafe();
ISpatial targetSpatial = TargetSource.GetSpatial();
double max_dist = (TargetMaxDistance == double.MaxValue) ? double.MaxValue : TargetMaxDistance;
DMesh3 meshIn = new DMesh3(sourceMesh);
bool target_closed = targetMesh.IsClosed();
MeshVertexSelection roiV = new MeshVertexSelection(meshIn);
SpinLock roi_lock = new SpinLock();
gParallel.ForEach(meshIn.VertexIndices(), (vid) => {
Vector3d pos = meshIn.GetVertex(vid);
Vector3d posTarget = TransformToTarget.TransformP(pos);
double dist = MeshQueries.NearestPointDistance(targetMesh, targetSpatial, posTarget, max_dist);
bool inside = (target_closed && targetSpatial.IsInside(posTarget));
if (dist < max_dist || inside)
{
bool taken = false;
roi_lock.Enter(ref taken);
roiV.Select(vid);
roi_lock.Exit();
}
});
if (is_invalidated())
{
return(null);
}
MeshFaceSelection roi_faces = new MeshFaceSelection(meshIn, roiV, 1);
roi_faces.ExpandToOneRingNeighbours(3);
roi_faces.LocalOptimize();
if (is_invalidated())
{
return(null);
}
RegionOperator op = new RegionOperator(meshIn, roi_faces);
DMesh3 meshROI = op.Region.SubMesh;
if (is_invalidated())
{
return(null);
}
RemesherPro remesher = new RemesherPro(meshROI);
remesher.SetTargetEdgeLength(TargetEdgeLength);
remesher.PreventNormalFlips = this.PreventNormalFlips;
remesher.EnableFlips = this.EnableFlips;
remesher.EnableSplits = this.EnableSplits;
remesher.EnableCollapses = this.EnableCollapses;
remesher.EnableSmoothing = this.EnableSmoothing;
remesher.SmoothSpeedT = this.SmoothingSpeed;
BoundedProjectionTarget target = new BoundedProjectionTarget()
{
Source = sourceMesh, SourceSpatial = inputSpatial,
Target = targetMesh, TargetSpatial = targetSpatial,
SourceToTargetXForm = source_to_target,
TargetToSourceXForm = target_to_source,
MaxDistance = max_dist,
Smoothness = transition_smoothness
};
remesher.SetProjectionTarget(target);
if (remesher.Constraints == null)
{
remesher.SetExternalConstraints(new MeshConstraints());
}
MeshConstraintUtil.FixAllBoundaryEdges(remesher.Constraints, meshROI);
if (is_invalidated())
{
return(null);
}
remesher.Progress = new ProgressCancel(is_invalidated);
remesher.FastestRemesh(RemeshRounds);
if (is_invalidated())
{
return(null);
}
op.BackPropropagate();
return(meshIn);
}
public virtual void Update()
{
base.begin_update();
if (MeshSource == null)
{
throw new Exception("MeshVertexDisplacementOp: must set valid MeshSource to compute!");
}
if (DisplacementSource == null)
{
throw new Exception("MeshVertexDisplacementOp: must set valid DisplacementSource to compute!");
}
DMesh3 meshIn = MeshSource.GetDMeshUnsafe();
IVectorDisplacement displace = DisplacementSource.GetDisplacement();
if (displace.Count != 0 && displace.Count != meshIn.MaxVertexID)
{
throw new Exception("MeshVertexDisplacementOp: inconsistent counts " + displace.Count.ToString() + " != " + meshIn.MaxVertexID.ToString());
}
DMesh3 mesh = new DMesh3(meshIn, MeshHints.None);
//if (!mesh.HasVertexNormals)
// MeshNormals.QuickCompute(mesh);
if (displace.Count > 0)
{
gParallel.ForEach(mesh.VertexIndices(), (vid) => {
Vector3d dv = displace.GetDisplacementForIndex(vid);
//Vector3f n = mesh.GetVertexNormal(vid);
Vector3d v = mesh.GetVertex(vid);
v += dv;
mesh.SetVertex(vid, v);
});
if (enable_heat_map)
{
// compute max displace len
ColorMap map = new ColorMap();
map.AddPoint(0, Colorf.CornflowerBlue);
float d = (float)HeatMapMaxDistance;
map.AddPoint(d, Colorf.Orange);
map.AddPoint(2 * d, Colorf.VideoYellow);
map.AddPoint(4 * d, Colorf.VideoRed);
map.AddPoint(-d, Colorf.VideoMagenta);
float max_displace = d;
gParallel.ForEach(mesh.VertexIndices(), (vid) => {
Vector3f dv = (Vector3f)displace.GetDisplacementForIndex(vid);
Vector3f n = mesh.GetVertexNormal(vid);
float sign = n.Dot(dv) > 0 ? 1 : -1;
Colorf c = map.Linear(dv.Length * sign);
Colorf existing_c = mesh.GetVertexColor(vid);
float preserve__max = max_displace / 2;
float t = MathUtil.Clamp(dv.Length / preserve__max, 0.0f, 1.0f);
c = (1.0f - t) * existing_c + (t) * c;
mesh.SetVertexColor(vid, c);
//float t = MathUtil.Clamp(dv.Length / max_displace, -1.0f, 1.0f);
//mesh.SetVertexColor(vid, t * Colorf.Orange);
});
}
}
MeshNormals.QuickCompute(mesh);
DisplacedMesh = mesh;
base.complete_update();
}
