public override IEnumerable <Autodesk.DesignScript.Interfaces.IGraphicItem> GetDynGeometry()
{
IList <Autodesk.DesignScript.Interfaces.IGraphicItem> ret = new List <Autodesk.DesignScript.Interfaces.IGraphicItem>();
lock (access_obj)
{
using (var ctx = new SteelServices.DocContext())
{
var myGrid = Utils.GetObject(Handle) as Autodesk.AdvanceSteel.Modelling.Grid;
Matrix3d gridCS = myGrid.CS;
Vector3d xVect = null;
Vector3d yVect = null;
Vector3d ZVect = null;
Point3d origin = null;
gridCS.GetCoordSystem(out origin, out xVect, out yVect, out ZVect);
Autodesk.AdvanceSteel.Modelling.GridElement[] gridEles = null;
myGrid.GetAllElements(out gridEles);
foreach (var item in gridEles)
{
Curve3d curve = null;
item.GetCurve(ref curve, gridCS);
if (curve != null)
{
Point3d sp = null;
Point3d ep = null;
if (curve.HasStartPoint(out sp))
{
if (curve.HasEndPoint(out ep))
{
var line1 = Autodesk.DesignScript.Geometry.Line.ByStartPointEndPoint(Utils.ToDynPoint(sp, true), Utils.ToDynPoint(ep, true));
ret.Add(line1);
}
}
}
}
}
}
return(ret);
}
public override Autodesk.DesignScript.Geometry.Curve GetDynCurve()
{
lock (access_obj)
{
using (var ctx = new SteelServices.DocContext())
{
var camera = Utils.GetObject(Handle) as Autodesk.AdvanceSteel.Modelling.SpecialPart;
Matrix3d cameraCS = camera.CS;
Vector3d xVect = null;
Vector3d yVect = null;
Vector3d ZVect = null;
Point3d origin = null;
cameraCS.GetCoordSystem(out origin, out xVect, out yVect, out ZVect);
using (var dynPoint = Utils.ToDynPoint(origin, true))
{
return(Autodesk.DesignScript.Geometry.Circle.ByCenterPointRadius(dynPoint, 0.01));
}
}
}
}
public override Autodesk.DesignScript.Geometry.Curve GetDynCurve()
{
lock (access_obj)
{
using (var ctx = new SteelServices.DocContext())
{
var camera = Utils.GetObject(Handle) as Autodesk.AdvanceSteel.ConstructionHelper.Camera;
Matrix3d cameraCS = camera.CameraCS;
Vector3d xVect = null;
Vector3d yVect = null;
Vector3d ZVect = null;
Point3d origin = null;
cameraCS.GetCoordSystem(out origin, out xVect, out yVect, out ZVect);
var cameraPoint = Utils.ToDynPoint(origin, true);
var p1 = origin + (xVect * -100);
p1 = p1 + (yVect * 100);
var p2 = p1 + (xVect * 200);
var p4 = p1 + (yVect * -200);
var p3 = p4 + (xVect * 200);
List <Point3d> lstPoints = new List <Point3d>()
{
p1, p2, p3, p4
};
IEnumerable <Autodesk.DesignScript.Geometry.Point> dynPoints = Utils.ToDynPoints(lstPoints.ToArray(), true);
var poly = Autodesk.DesignScript.Geometry.Polygon.ByPoints(dynPoints, true);
foreach (var pt in dynPoints)
{
pt.Dispose();
}
return(poly);
}
}
}
internal BeamPolycut(AdvanceSteel.Nodes.SteelDbObject element,
int cutShapeRectCircle,
Autodesk.AdvanceSteel.Geometry.Point3d insertPoint,
Autodesk.AdvanceSteel.Geometry.Vector3d normal,
Autodesk.AdvanceSteel.Geometry.Vector3d lengthVector,
int corner,
List <Property> beamFeatureProperties)
{
lock (access_obj)
{
using (var ctx = new SteelServices.DocContext())
{
List <Property> defaultData = beamFeatureProperties.Where(x => x.Level == ".").ToList <Property>();
List <Property> postWriteDBData = beamFeatureProperties.Where(x => x.Level == "Z_PostWriteDB").ToList <Property>();
double length = 0;
double width = 0;
double radius = 0;
if (defaultData.FirstOrDefault <Property>(x => x.Name == "Length") != null)
{
length = (double)defaultData.FirstOrDefault <Property>(x => x.Name == "Length").InternalValue;
}
if (defaultData.FirstOrDefault <Property>(x => x.Name == "Width") != null)
{
width = (double)defaultData.FirstOrDefault <Property>(x => x.Name == "Width").InternalValue;
}
if (defaultData.FirstOrDefault <Property>(x => x.Name == "Radius") != null)
{
radius = (double)defaultData.FirstOrDefault <Property>(x => x.Name == "Radius").InternalValue;
}
string existingFeatureHandle = SteelServices.ElementBinder.GetHandleFromTrace();
string elementHandle = element.Handle;
FilerObject obj = Utils.GetObject(elementHandle);
BeamMultiContourNotch beamFeat = null;
if (obj != null && obj.IsKindOf(FilerObject.eObjectType.kBeam))
{
if (string.IsNullOrEmpty(existingFeatureHandle) || Utils.GetObject(existingFeatureHandle) == null)
{
Beam bmObj = obj as Beam;
switch (cutShapeRectCircle)
{
case 0:
beamFeat = new BeamMultiContourNotch(bmObj, (Beam.eEnd) 1, insertPoint, normal, lengthVector, length, width);
break;
case 1:
beamFeat = new BeamMultiContourNotch(bmObj, (Beam.eEnd) 1, insertPoint, normal, lengthVector, radius);
break;
}
Vector2d offset;
switch (corner)
{
case 0: //Top Left
offset = new Vector2d(-1, 1);
break;
case 1: //Top Right
offset = new Vector2d(1, 1);
break;
case 2: //Bottom Right
offset = new Vector2d(1, -1);
break;
case 3: //Bottom left
offset = new Vector2d(-1, -1);
break;
default: //Anything else ignore
offset = new Vector2d(0, 0);
break;
}
beamFeat.Offset = offset;
if (defaultData != null)
{
Utils.SetParameters(beamFeat, defaultData);
}
bmObj.AddFeature(beamFeat);
if (postWriteDBData != null)
{
Utils.SetParameters(beamFeat, postWriteDBData);
}
}
else
{
beamFeat = Utils.GetObject(existingFeatureHandle) as BeamMultiContourNotch;
if (beamFeat != null && beamFeat.IsKindOf(FilerObject.eObjectType.kBeamMultiContourNotch))
{
beamFeat.End = (Beam.eEnd) 0;
Matrix3d cutMatrix = beamFeat.CS;
Point3d orgin = null;
Vector3d xVec = null;
Vector3d yVec = null;
Vector3d zVec = null;
cutMatrix.GetCoordSystem(out orgin, out xVec, out yVec, out zVec);
xVec = new Vector3d(lengthVector);
yVec = xVec.CrossProduct(normal);
zVec = xVec.CrossProduct(yVec);
cutMatrix.SetCoordSystem(insertPoint, xVec, yVec, zVec);
beamFeat.CS = cutMatrix;
Vector2d offset;
switch (corner)
{
case 0: //Top Left
offset = new Vector2d(-1, 1);
break;
case 1: //Top Right
offset = new Vector2d(1, 1);
break;
case 2: //Bottom Right
offset = new Vector2d(1, -1);
break;
case 3: //Bottom left
offset = new Vector2d(-1, -1);
break;
default: //Anything else ignore
offset = new Vector2d(0, 0);
break;
}
beamFeat.Offset = offset;
if (defaultData != null)
{
Utils.SetParameters(beamFeat, defaultData);
}
if (postWriteDBData != null)
{
Utils.SetParameters(beamFeat, postWriteDBData);
}
}
else
{
throw new System.Exception("Not a Beam Feature");
}
}
}
else
{
throw new System.Exception("No Input Element found");
}
Handle = beamFeat.Handle;
SteelServices.ElementBinder.CleanupAndSetElementForTrace(beamFeat);
}
}
}
internal BeamPlaneCut(AdvanceSteel.Nodes.SteelDbObject element,
int end,
double shorteningLength,
List <Property> beamFeatureProperties)
{
lock (access_obj)
{
using (var ctx = new SteelServices.DocContext())
{
List <Property> defaultData = beamFeatureProperties.Where(x => x.Level == ".").ToList <Property>();
List <Property> postWriteDBData = beamFeatureProperties.Where(x => x.Level == "Z_PostWriteDB").ToList <Property>();
string existingFeatureHandle = SteelServices.ElementBinder.GetHandleFromTrace();
string elementHandle = element.Handle;
FilerObject obj = Utils.GetObject(elementHandle);
BeamShortening beamFeat = null;
if (obj != null && (obj.IsKindOf(FilerObject.eObjectType.kBeam)))
{
Matrix3d matrixAtPointOnBeam = null;
Point3d shortPt = null;
Point3d cutPoint = null;
Vector3d normal = null;
if (obj.IsKindOf(FilerObject.eObjectType.kBentBeam))
{
BentBeam actObj = obj as BentBeam;
switch (end)
{
case 0: //Start
shortPt = actObj.GetPointAtStart(shorteningLength);
break;
case 1: //End
shortPt = actObj.GetPointAtEnd(shorteningLength);
break;
}
matrixAtPointOnBeam = actObj.GetCSAtPoint(shortPt);
}
else
{
Beam actObj = obj as Beam;
switch (end)
{
case 0: //Start
shortPt = actObj.GetPointAtStart(shorteningLength);
break;
case 1: //End
shortPt = actObj.GetPointAtEnd(shorteningLength);
break;
}
matrixAtPointOnBeam = actObj.GetCSAtPoint(shortPt);
}
Point3d orgin = null;
Vector3d xV = null;
Vector3d xY = null;
Vector3d xZ = null;
matrixAtPointOnBeam.GetCoordSystem(out orgin, out xV, out xY, out xZ);
cutPoint = orgin;
normal = (end == 0 ? xV : xV.Negate());
if (string.IsNullOrEmpty(existingFeatureHandle) || Utils.GetObject(existingFeatureHandle) == null)
{
AtomicElement atomic = obj as AtomicElement;
beamFeat = new BeamShortening();
atomic.AddFeature(beamFeat);
beamFeat.Set(cutPoint, normal);
if (defaultData != null)
{
Utils.SetParameters(beamFeat, defaultData);
}
atomic.AddFeature(beamFeat);
if (postWriteDBData != null)
{
Utils.SetParameters(beamFeat, postWriteDBData);
}
}
else
{
beamFeat = Utils.GetObject(existingFeatureHandle) as BeamShortening;
if (beamFeat != null && beamFeat.IsKindOf(FilerObject.eObjectType.kBeamShortening))
{
beamFeat.Set(cutPoint, normal);
if (defaultData != null)
{
Utils.SetParameters(beamFeat, defaultData);
}
if (postWriteDBData != null)
{
Utils.SetParameters(beamFeat, postWriteDBData);
}
}
else
{
throw new System.Exception("Not a Beam Shorting Feature");
}
}
}
else
{
throw new System.Exception("No Input Element found");
}
Handle = beamFeat.Handle;
SteelServices.ElementBinder.CleanupAndSetElementForTrace(beamFeat);
}
}
}
