/// <summary>
/// 面重合配合
/// </summary>
/// <typeparam name="TFaceOne"></typeparam>
/// <typeparam name="TFaceTwo"></typeparam>
/// <param name="doc"></param>
/// <param name="faceOne"></param>
/// <param name="faceTwo"></param>
/// <param name="mateAlign"></param>
/// <returns></returns>
public static Mate2 AddFaceCoinMate <TFaceOne, TFaceTwo>(this IAssemblyDoc doc, TFaceOne faceOne, TFaceTwo faceTwo, MateAlignExtension mateAlign)
{
int mateError = 0;
Mate2 swMate = default;
SelectEntityOrFeature(faceOne, false);
SelectEntityOrFeature(faceTwo, true);
switch (mateAlign)
{
case MateAlignExtension.SameAlign:
swMate = doc.AddMate5((int)swMateType_e.swMateCOINCIDENT, (int)swMateAlign_e.swMateAlignALIGNED, false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, 0, out mateError);
break;
case MateAlignExtension.AntiAlign:
swMate = doc.AddMate5((int)swMateType_e.swMateCOINCIDENT, (int)swMateAlign_e.swMateAlignANTI_ALIGNED, false, 0, 0, 0, 0, 0, 0, 0, 0, false, false, 0, out mateError);
break;
default:
break;
}
return(swMate);
}
/// <summary>
/// 面重合配合
/// </summary>
/// <typeparam name="TFaceOne"></typeparam>
/// <typeparam name="TFaceTwo"></typeparam>
/// <param name="doc"></param>
/// <param name="faceOne"></param>
/// <param name="faceTwo"></param>
/// <param name="mateAlign"></param>
/// <param name="dis">距离，正负代表方向</param>
/// <returns></returns>
public static Mate2 AddFaceDisMate <TFaceOne, TFaceTwo>(this IAssemblyDoc doc, TFaceOne faceOne, TFaceTwo faceTwo, MateAlignExtension mateAlign, double dis)
{
int mateError = 0;
Mate2 swMate = default;
SelectEntityOrFeature(faceOne, false);
SelectEntityOrFeature(faceTwo, true);
switch (mateAlign)
{
case MateAlignExtension.SameAlign:
if (dis > 0)
{
swMate = doc.AddMate5((int)swMateType_e.swMateDISTANCE, (int)swMateAlign_e.swMateAlignALIGNED, false, dis, dis, dis, 0, 0, 0, 0, 0, false, false, 0, out mateError);
}
else
{
swMate = doc.AddMate5((int)swMateType_e.swMateDISTANCE, (int)swMateAlign_e.swMateAlignALIGNED, true, -dis, -dis, -dis, 0, 0, 0, 0, 0, false, false, 0, out mateError);
}
break;
case MateAlignExtension.AntiAlign:
if (dis > 0)
{
swMate = doc.AddMate5((int)swMateType_e.swMateDISTANCE, (int)swMateAlign_e.swMateAlignANTI_ALIGNED, false, dis, dis, dis, 0, 0, 0, 0, 0, false, false, 0, out mateError);
}
else
{
swMate = doc.AddMate5((int)swMateType_e.swMateDISTANCE, (int)swMateAlign_e.swMateAlignANTI_ALIGNED, true, -dis, -dis, -dis, 0, 0, 0, 0, 0, false, false, 0, out mateError);
}
break;
default:
break;
}
return(swMate);
}
/// <summary>
/// Extension for <see cref="IAssemblyDoc.AddMate5(int, int, bool, double, double, double, double, double, double, double, double, bool, bool, int, out int)"/>
/// </summary>
/// <param name="doc"><see cref="IAssemblyDoc"/></param>
/// <param name="mateType"><see cref="swMateType_e"/>配合类型</param>
/// <param name="mateAlign"><see cref="MateAlignExtension"/>同向或者反向配合</param>
/// <param name="flip">是否反转配合,只在距离配合时起作用</param>
/// <param name="distance">距离参数 参数顺序:距离 最大距离值 最小距离值</param>
/// <param name="gearRatioParam">齿轮配合参数 参数顺序:GearRatioNumerator GearRatioDenominator </param>
/// <param name="angle">角度参数 顺序: 角度 角度最大绝对值 角度最小绝对值</param>
/// <param name="forPostionOnly">仅使用位置</param>
/// <param name="lockRotation">锁定位置</param>
/// <param name="widthMateOption">宽度配合参数</param>
/// <param name="error">错误</param>
/// <param name="throwIfError">是否在错误时抛出异常,默认为抛出</param>
/// <returns></returns>
public static IMate2 AddMate5Ex(this IAssemblyDoc doc, swMateType_e mateType, MateAlignExtension mateAlign, bool flip, Tuple <double, double, double> distance, Tuple <double, double> gearRatioParam, Tuple <double, double, double> angle, bool forPostionOnly, bool lockRotation, swMateWidthOptions_e widthMateOption, out swAddMateError_e error, bool throwIfError = true)
{
int error_int;
var mate = doc.AddMate5(mateType.SWToInt(), mateAlign == MateAlignExtension.SameAlign ? swMateAlign_e.swMateAlignALIGNED.SWToInt() : swMateAlign_e.swMateAlignANTI_ALIGNED.SWToInt(), flip, distance.Item1, distance.Item2, distance.Item3, gearRatioParam.Item1, gearRatioParam.Item2, angle.Item1, angle.Item2, angle.Item3, forPostionOnly, lockRotation, widthMateOption.SWToInt(), out error_int);
error = error_int.CastObj <swAddMateError_e>();
if (throwIfError && error != swAddMateError_e.swAddMateError_NoError)
{
throw new InvalidOperationException($"Mate Error:{error.ToString()}");
}
return(mate);
}
