//取出打印中要传给模板的数据，各个子类应分别实现这个方法
protected string[] GetPrintVars(MKeyPart mKeyPart, MKeyPartDetail mKeyPartDetail, List <string> reserveInfo)
{
if (mKeyPart == null || mKeyPartDetail == null)
{
return(null);
}
int count = (reserveInfo == null) ? 0 : reserveInfo.Count;
string[] returnValue = new string[20 + count];
for (int i = 0; i < returnValue.Length; i++)
{
returnValue[i] = string.Empty;
}
returnValue[1] = mKeyPart.MItemCode;
returnValue[2] = mKeyPart.LotNO;
returnValue[3] = mKeyPart.PCBA;
returnValue[4] = mKeyPart.BIOS;
returnValue[5] = mKeyPart.Version;
returnValue[6] = mKeyPart.VendorItemCode;
returnValue[7] = mKeyPart.VendorCode;
returnValue[8] = mKeyPart.DateCode;
returnValue[9] = mKeyPart.MoCode;
returnValue[10] = mKeyPart.MITEMNAME;
returnValue[11] = mKeyPartDetail.SerialNo;
for (int i = 0; i < count; i++)
{
returnValue[20 + i] = reserveInfo[i];
}
return(returnValue);
}
public UserControl.Messages Print(string printer, string templatePath, MKeyPart mKeyPart, List <MKeyPartDetail> mKeyPartDetailList, List <string> reserveInfo)
{
UserControl.Messages messages = new UserControl.Messages();
try
{
try
{
this.PrePrint();
_CodeSoftFacade.OpenTemplate(printer, templatePath);
}
catch (System.Exception ex)
{
messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message));
return(messages);
}
//批量打印前生成文本文件
string strBatchDataFile = string.Empty;
if (_IsBatchPrint)
{
strBatchDataFile = CreateFile();
}
for (int i = 0; i < mKeyPartDetailList.Count; i++)
{
LabelPrintVars labelPrintVars = new LabelPrintVars();
string[] vars = new string[0];
if (messages.IsSuccess())
{
try
{
//要传给Codesoft的数组，字段顺序不能修改
vars = this.GetPrintVars(mKeyPart, mKeyPartDetailList[i], reserveInfo);
//批量打印前的写文件
if (_IsBatchPrint)
{
string[] printVars = ProcessVars(vars, labelPrintVars);
WriteFile(strBatchDataFile, printVars);
}
//直接打印
else
{
_CodeSoftFacade.LabelPrintVars = labelPrintVars;
_CodeSoftFacade.Print(vars);
}
}
catch (System.Exception ex)
{
messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message));
return(messages);
}
}
}
//批量打印
if (_IsBatchPrint)
{
try
{
_CodeSoftFacade.Print(strBatchDataFile, GetDataDescPath(_DataDescFileName));
}
catch (System.Exception ex)
{
messages.Add(new UserControl.Message(UserControl.MessageType.Error, ex.Message));
return(messages);
}
}
messages.Add(new UserControl.Message(UserControl.MessageType.Success, "$Success_Print_Label"));
}
finally
{
}
return(messages);
}
public void ProcessRequest(HttpContext context)
{
string itemCodeValue = context.Request.QueryString["itemCodeValue"].Trim().ToUpper();
string snPrefix = context.Request.QueryString["snPrefix"].Trim().ToUpper();
string StartSnCodeValue = context.Request.QueryString["StartSnCodeValue"].Trim().ToUpper();
string actionType = context.Request.QueryString["Action"].Trim().ToUpper();
string EndSnValue = context.Request.QueryString["EndSnValue"].Trim().ToUpper();
string SnSeqValue = context.Request.QueryString["SnSeqValue"].Trim().ToUpper();
string CheckedValue = context.Request.QueryString["CheckedValue"].Trim().ToUpper();
try
{
_facade = new MaterialFacade(this.DataProvider);
string returnValue = "false";
string _scale = string.Empty;
NumberScale scale = NumberScale.Scale34;
_scale = "34";
if (CheckedValue == "10")
{
scale = NumberScale.Scale10;
_scale = "10";
}
else if (CheckedValue == "16")
{
scale = NumberScale.Scale16;
_scale = "16";
}
else if (CheckedValue == "34")
{
scale = NumberScale.Scale34;
_scale = "34";
}
else
{
scale = NumberScale.Scale34;
_scale = "34";
}
int length = StartSnCodeValue.Trim().Length;
if (StartSnCodeValue.Trim() != "" && EndSnValue.Trim() != "")
{
long startSN = 0;
try
{
startSN = long.Parse(NumberScaleHelper.ChangeNumber(StartSnCodeValue.Trim(), scale, NumberScale.Scale10));
}
catch (Exception ex)
{
//throw ex;
//txtMORCardStartEdit.Focus();
returnValue = "false";
}
long endSN = 0;
try
{
endSN = long.Parse(NumberScaleHelper.ChangeNumber(EndSnValue.Trim(), scale, NumberScale.Scale10));
}
catch (Exception ex)
{
returnValue = "false";
}
if ((startSN.ToString().Length + snPrefix.Trim().Length) > 40)
{
returnValue = "false";
}
if (startSN > endSN)
{
returnValue = "false";
}
bool needUpdateDetail = true;
if (actionType == "UPDATE")
{
MKeyPart oldMKeyPart = (MKeyPart)_facade.GetMKeyPart(Convert.ToDecimal(SnSeqValue), itemCodeValue);
if (oldMKeyPart != null &&
oldMKeyPart.RCardPrefix.Trim().ToUpper() == snPrefix.Trim().ToUpper() &&
oldMKeyPart.RunningCardStart.Trim().ToUpper() == StartSnCodeValue.Trim().ToUpper() &&
oldMKeyPart.RunningCardEnd.Trim().ToUpper() == EndSnValue.Trim().ToUpper() &&
oldMKeyPart.SNScale.Trim().ToUpper() == _scale)
{
needUpdateDetail = false;
}
}
//if (actionType == "ADD")
//{
//检查需要插入的detail数据量是否太多
if (needUpdateDetail)
{
if (endSN - startSN > 4999)
{
returnValue = "true";
}
else
{
returnValue = "false";
}
}
else
{
returnValue = "false";
}
//}
//if (actionType == "UPDATE")
//{
// long count = endSN - startSN + 1; //当前界面上算出来的数量
// try
// {
// long checkCount = _facade.CheckMKeyPartDetail(SnSeqValue, itemCodeValue, StartSnCodeValue, EndSnValue, snPrefix.Trim().ToUpper());
// if (checkCount == 0)
// {
// if (endSN - startSN > 4999)
// {
// returnValue = "true";
// }
// else
// {
// returnValue = "false";
// }
// }
// else
// {
// if (count - checkCount < 0 || count - checkCount == 0) //会删掉数据库的序列号，所以速度比较快。
// {
// returnValue = "false";
// }
// else
// {
// if (count - checkCount > 4999) //为4999 //会insert into 序列号到数据库，所以要判断inset into的数量是否大于4999
// {
// returnValue = "true";
// }
// else
// {
// returnValue = "false";
// }
// }
// }
// }
// catch (Exception ex)
// {
// returnValue = "false";
// }
//}
}
else
{
returnValue = "false";
}
context.Response.Write(returnValue);
}
catch (Exception ex)
{
context.Response.Write(ex.Message);
}
}