// The compute() method does the actual work of the node using the inputs
// of the node to generate its output.
//
// Compute takes two parameters: plug and data.
// - Plug is the the data value that needs to be recomputed
// - Data provides handles to all of the nodes attributes, only these
// handles should be used when performing computations.
//
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
MObject thisNode = thisMObject();
MFnDependencyNode fnThisNode = new MFnDependencyNode(thisNode);
MGlobal.displayInfo("affects::compute(), plug being computed is \"" + plug.name + "\"");
if (plug.partialName() == "B")
{
// Plug "B" is being computed. Assign it the value on plug "A"
// if "A" exists.
//
MPlug pA = fnThisNode.findPlug("A");
MGlobal.displayInfo("\t\t... found dynamic attribute \"A\", copying its value to \"B\"");
MDataHandle inputData = dataBlock.inputValue(pA);
int value = inputData.asInt;
MDataHandle outputHandle = dataBlock.outputValue(plug);
outputHandle.set(value);
dataBlock.setClean(plug);
}
else
{
return(false);
}
return(true);
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
if (plug.equalEqual(animCube.outputMesh))
{
/* Get time */
MDataHandle timeData = dataBlock.inputValue(animCube.time);
MTime time = timeData.asTime;
/* Get output object */
MDataHandle outputHandle = dataBlock.outputValue(outputMesh);
MFnMeshData dataCreator = new MFnMeshData();
MObject newOutputData = dataCreator.create();
createMesh(time, ref newOutputData);
outputHandle.set(newOutputData);
dataBlock.setClean(plug);
}
else
return false;
return true;
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
factor = springFactor(dataBlock);
// Note: return "kUnknownParameter" so that Maya spring node can
// compute spring force for this plug-in simple spring node.
return(false);
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
factor = springFactor(dataBlock);
// Note: return "kUnknownParameter" so that Maya spring node can
// compute spring force for this plug-in simple spring node.
return false;
}
override public void deform(MDataBlock block, MItGeometry iter, MMatrix m, uint multiIndex)
{
MDataHandle angleData = block.inputValue(angle);
MDataHandle envData = block.inputValue(envelope);
double magnitude = angleData.asDouble;
float env = envData.asFloat;
for (; !iter.isDone; iter.next())
{
MPoint pt = iter.position();
// do the twist
//
double ff = magnitude * pt.y * env;
if (ff != 0.0)
{
double cct = Math.Cos(ff);
double cst = Math.Sin(ff);
double tt = pt.x * cct - pt.z * cst;
pt.z = pt.x * cst + pt.z * cct;
pt.x = tt;;
}
iter.setPosition(pt);
}
}
double springFactor( MDataBlock block )
{
MDataHandle handle = block.inputValue(aSpringFactor);
double value = 0.0;
value = handle.asDouble;
return value;
}
public override void deform(MDataBlock block, MItGeometry iter, MMatrix m, uint multiIndex)
{
MDataHandle angleData = block.inputValue(angle);
MDataHandle envData = block.inputValue(envelope);
double magnitude = angleData.asDouble;
float env = envData.asFloat;
for (; !iter.isDone; iter.next())
{
MPoint pt = iter.position();
// do the twist
//
double ff = magnitude * pt.y * env;
if (ff != 0.0)
{
double cct = Math.Cos(ff);
double cst = Math.Sin(ff);
double tt = pt.x * cct - pt.z * cst;
pt.z = pt.x * cst + pt.z * cct;
pt.x = tt; ;
}
iter.setPosition(pt);
}
}
public override bool compute(MPlug plug, MDataBlock datablock)
// Since there are no output attributes this is not necessary but
// if we wanted to compute an output mesh for rendering it would
// be done here base on the inputs.
{
return(false);
}
// The compute() method does the actual work of the node using the inputs
// of the node to generate its output.
//
// Compute takes two parameters: plug and data.
// - Plug is the the data value that needs to be recomputed
// - Data provides handles to all of the nodes attributes, only these
// handles should be used when performing computations.
//
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
MObject thisNode = thisMObject();
MFnDependencyNode fnThisNode = new MFnDependencyNode(thisNode);
MGlobal.displayInfo("affects::compute(), plug being computed is \"" + plug.name + "\"");
if (plug.partialName() == "B") {
// Plug "B" is being computed. Assign it the value on plug "A"
// if "A" exists.
//
MPlug pA = fnThisNode.findPlug("A");
MGlobal.displayInfo("\t\t... found dynamic attribute \"A\", copying its value to \"B\"");
MDataHandle inputData = dataBlock.inputValue(pA);
int value = inputData.asInt;
MDataHandle outputHandle = dataBlock.outputValue( plug );
outputHandle.set(value);
dataBlock.setClean(plug);
} else {
return false;
}
return true;
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
if (plug.equalEqual(animCube.outputMesh))
{
/* Get time */
MDataHandle timeData = dataBlock.inputValue(animCube.time);
MTime time = timeData.asTime;
/* Get output object */
MDataHandle outputHandle = dataBlock.outputValue(outputMesh);
MFnMeshData dataCreator = new MFnMeshData();
MObject newOutputData = dataCreator.create();
createMesh(time, ref newOutputData);
outputHandle.set(newOutputData);
dataBlock.setClean(plug);
}
else
{
return(false);
}
return(true);
}
double end2WeightValue( MDataBlock block )
{
MDataHandle hValue = block.inputValue( mEnd2Weight );
double value = 0.0;
value = hValue.asDouble;
return value;
}
double springFactor(MDataBlock block)
{
MDataHandle handle = block.inputValue(aSpringFactor);
double value = 0.0;
value = handle.asDouble;
return(value);
}
double end2WeightValue(MDataBlock block)
{
MDataHandle hValue = block.inputValue(mEnd2Weight);
double value = 0.0;
value = hValue.asDouble;
return(value);
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
//
// Description:
// Computes a color value
// from a surface noraml angle.
//
{
if ((plug.notEqual(aOutColor)) && (plug.parent.notEqual(aOutColor)))
{
return(false);
}
MFloatVector resultColor;
MFloatVector walkable = dataBlock.inputValue(aColor1).asFloatVector;
MFloatVector nonWalkable = dataBlock.inputValue(aColor2).asFloatVector;
MFloatVector surfaceNormal = dataBlock.inputValue(aTriangleNormalCamera).asFloatVector;
MFloatMatrix viewMatrix = dataBlock.inputValue(aMatrixEyeToWorld).asFloatMatrix;
float angle = dataBlock.inputValue(aAngle).asFloat;
// Normalize the view vector
//
surfaceNormal.normalize();
MFloatVector WSVector = surfaceNormal.multiply(viewMatrix);
// find dot product
//
float scalarNormal = WSVector.multiply(new MFloatVector(0, 1, 0));
// take the absolute value
//
if (scalarNormal < 0.0)
{
scalarNormal *= -1.0f;
}
if (Math.Cos(angle * AWdegreesToRadians) < scalarNormal)
{
resultColor = walkable;
}
else
{
resultColor = nonWalkable;
}
// set ouput color attribute
//
MDataHandle outColorHandle = dataBlock.outputValue(aOutColor);
MFloatVector outColor = outColorHandle.asFloatVector;
outColor = resultColor;
outColorHandle.setClean();
return(true);
}
private double magnitude(MDataBlock block)
{
MDataHandle hValue;
double value = 0.0;
try
{
hValue = block.inputValue(mMagnitude);
value = hValue.asDouble;
}
catch
{
}
return(value);
}
override public bool compute(MPlug plug, MDataBlock dataBlock)
{
bool res = plug.attribute.equalEqual(output);
if (res)
{
MDataHandle inputData;
inputData = dataBlock.inputValue(input);
MDataHandle outputHandle = dataBlock.outputValue(output);
outputHandle.asFloat = 10 * (float)Math.Sin((double)inputData.asFloat);
dataBlock.setClean(plug);
return(true);
}
return(false);
}
override public bool compute(MPlug plug, MDataBlock dataBlock)
{
bool res = plug.attribute.equalEqual(output);
if (res)
{
MDataHandle inputData;
inputData = dataBlock.inputValue(input);
MDataHandle outputHandle = dataBlock.outputValue(output);
outputHandle.asFloat = 10 * (float)Math.Sin((double)inputData.asFloat);
dataBlock.setClean(plug);
return true;
}
return false;
}
override public void deform(MDataBlock block, MItGeometry iter, MMatrix m, uint multiIndex)
{
MDataHandle angleData = block.inputValue(angle);
MDataHandle envData = block.inputValue(envelope);
double magnitude = angleData.asDouble;
float env = envData.asFloat;
var startTime = DateTime.Now;
var poses = new MPointArray();
iter.allPositions(poses);
//var newPos = VulankCompute.ComputeData(poses, (float)magnitude, env);
VulankCompute.ComputeData(poses, (float)magnitude, env);
iter.setAllPositions(poses);
var timeSpand = DateTime.Now - startTime;
MGlobal.displayInfo(string.Format("---------- total time : {0}", timeSpand.TotalSeconds));
//for (; !iter.isDone; iter.next())
//{
//MPoint pt = iter.position();
//// do the twist
////
//double ff = magnitude * pt.y * env;
//if (ff != 0.0)
//{
// double cct = Math.Cos(ff);
// double cst = Math.Sin(ff);
// double tt = pt.x * cct - pt.z * cst;
// pt.z = pt.x * cst + pt.z * cct;
// pt.x = tt; ;
//}
//iter.setPosition(pt);
//}
}
public override void validateAndSetValue(MPlug plug, MDataHandle handle, MDGContext context)
{
// Make sure that there is something interesting to process.
//
if (plug.isNull)
{
throw new ArgumentNullException("plug");
}
if (plug.equalEqual(aRockInX))
{
MDataBlock block = _forceCache(context);
MDataHandle blockHandle = block.outputValue(plug);
// Update our new rock in x value
double rockInX = handle.asDouble;
blockHandle.set(rockInX);
rockXValue = rockInX;
// Update the custom transformation matrix to the
// right rock value.
rockingTransformCheckMatrix ltm = getRockingTransformMatrix();
if (ltm != null)
{
ltm.setRockInX(rockXValue);
}
else
{
MGlobal.displayError("Failed to get rock transform matrix");
}
blockHandle.setClean();
// Mark the matrix as dirty so that DG information
// will update.
dirtyMatrix();
return;
}
base.validateAndSetValue(plug, handle, context);
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
if ( plug.equalEqual(gOutputFloat_2Float_3Float) )
{
// attribute affecting generic attribute case. Based on the
// input attribute, we modify the output generic attribute
MDataHandle inputDataInt = dataBlock.inputValue( gInputInt );
int inputInt = inputDataInt.asInt;
// Get the output handle
MDataHandle outputData = dataBlock.outputValue( plug );
bool isGenericNumeric = false;
bool isGenericNull = false;
// Is the output handle generic data
if ( outputData.isGeneric( ref isGenericNumeric, ref isGenericNull ) )
{
// Based on the inputHandle, update the generic
// output handle
if ( inputInt == 1 )
outputData.setGenericBool( false, true );
else if ( inputInt == 2 )
outputData.setGenericBool( true, true );
else if ( inputInt == 3 )
outputData.setGenericChar( 127, true );
else if ( inputInt == 4 )
outputData.setGenericDouble( 3.145, true );
else if ( inputInt == 5 )
outputData.setGenericFloat( (float)9.98, true );
else if ( inputInt == 6 )
outputData.setGenericShort( 3245, true );
else if ( inputInt == 7 )
outputData.setGenericInt( 32768, true );
else if ( inputInt == 8 )
{
MFnNumericData numericData = new MFnNumericData();
MObject obj = numericData.create( MFnNumericData.Type.k2Float);
numericData.setData( (float)1.5, (float)6.7 );
outputData.set( obj );
}
else if ( inputInt == 9 )
{
MFnNumericData numericData = new MFnNumericData();
MObject obj = numericData.create( MFnNumericData.Type.k3Float);
numericData.setData( (float)2.5, (float)8.7, (float)2.3345 );
outputData.set( obj );
}
else if ( inputInt == 10 )
{
outputData.setGenericInt( 909, true );
}
// Mark the data clean
outputData.setClean();
dataBlock.setClean( gOutputFloat_2Float_3Float );
}
}
else
{
return false;
}
return true;
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
return(true);
}
public override bool compute( MPlug plug, MDataBlock block)
{
if ( plug.equalEqual(constraintGeometry) )
{
//
block.inputValue(constraintParentInverseMatrix);
//
MArrayDataHandle targetArray = block.inputArrayValue( compoundTarget );
uint targetArrayCount = targetArray.elementCount();
double weight,selectedWeight = 0;
if ( weightType == GeometrySurfaceConstraintCommand.ConstraintType.kSmallestWeight )
selectedWeight = float.MaxValue;
MObject selectedMesh = null;
uint i;
for ( i = 0; i < targetArrayCount; i++ )
{
MDataHandle targetElement = targetArray.inputValue();
weight = targetElement.child(targetWeight).asDouble;
if ( !equivalent(weight,0.0))
{
if ( weightType == GeometrySurfaceConstraintCommand.ConstraintType.kLargestWeight )
{
if ( weight > selectedWeight )
{
MObject mesh = targetElement.child(targetGeometry).asMesh;
if ( !mesh.isNull )
{
selectedMesh = mesh;
selectedWeight = weight;
}
}
}
else
{
if ( weight < selectedWeight )
{
MObject mesh = targetElement.child(targetGeometry).asMesh;
if ( !mesh.isNull )
{
selectedMesh = mesh;
selectedWeight = weight;
}
}
}
}
targetArray.next();
}
//
if( selectedMesh == null )
{
block.setClean(plug);
}
else
{
// The transform node via the geometry attribute will take care of
// updating the location of the constrained geometry.
MDataHandle outputConstraintGeometryHandle = block.outputValue(constraintGeometry);
outputConstraintGeometryHandle.setMObject(selectedMesh);
}
}
else
{
return false;
}
return true;
}
protected override MEulerRotation applyRotationLimits(MEulerRotation unlimitedRotation, MDataBlock block)
{
//
// For demonstration purposes we limit the rotation to 60
// degrees and bypass the rotation limit attributes
//
DegreeRadianConverter conv = new DegreeRadianConverter();
double degrees = conv.radiansToDegrees( unlimitedRotation.x );
if ( degrees < 60 )
return unlimitedRotation;
MEulerRotation euler = new MEulerRotation();
euler.x = conv.degreesToRadians( 60.0 );
return euler;
}
private unsafe void apply(
MDataBlock block,
uint receptorSize,
MDoubleArray magnitudeArray,
MDoubleArray magnitudeOwnerArray,
MVectorArray directionArray,
MVectorArray directionOwnerArray,
MVectorArray outputForce
)
//
// Compute output force for each particle. If there exists the
// corresponding per particle attribute, use the data passed from
// particle shape (stored in magnitudeArray and directionArray).
// Otherwise, use the attribute value from the field.
//
{
// get the default values
MVector defaultDir = direction(block);
double defaultMag = magnitude(block);
uint magArraySize = magnitudeArray.length;
uint dirArraySize = directionArray.length;
uint magOwnerArraySize = magnitudeOwnerArray.length;
uint dirOwnerArraySize = directionOwnerArray.length;
uint numOfOwner = magOwnerArraySize;
if (dirOwnerArraySize > numOfOwner)
numOfOwner = dirOwnerArraySize;
double m_magnitude = defaultMag;
MVector m_direction = defaultDir;
for (int ptIndex = 0; ptIndex < receptorSize; ptIndex++)
{
if (receptorSize == magArraySize)
m_magnitude = magnitudeArray[ptIndex];
if (receptorSize == dirArraySize)
m_direction = directionArray[ptIndex];
if (numOfOwner > 0)
{
for (int nthOwner = 0; nthOwner < numOfOwner; nthOwner++)
{
if (magOwnerArraySize == numOfOwner)
m_magnitude = magnitudeOwnerArray[nthOwner];
if (dirOwnerArraySize == numOfOwner)
m_direction = directionOwnerArray[nthOwner];
outputForce.append(m_direction * m_magnitude);
}
}
else
{
outputForce.append(m_direction * m_magnitude);
}
}
}
private double magnitude(MDataBlock block)
{
MDataHandle hValue;
double value = 0.0;
try
{
hValue = block.inputValue(mMagnitude);
value = hValue.asDouble;
}
catch
{
}
return (value);
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
if (plug.equalEqual(gOutputFloat_2Float_3Float))
{
// attribute affecting generic attribute case. Based on the
// input attribute, we modify the output generic attribute
MDataHandle inputDataInt = dataBlock.inputValue(gInputInt);
int inputInt = inputDataInt.asInt;
// Get the output handle
MDataHandle outputData = dataBlock.outputValue(plug);
bool isGenericNumeric = false;
bool isGenericNull = false;
// Is the output handle generic data
if (outputData.isGeneric(ref isGenericNumeric, ref isGenericNull))
{
// Based on the inputHandle, update the generic
// output handle
if (inputInt == 1)
{
outputData.setGenericBool(false, true);
}
else if (inputInt == 2)
{
outputData.setGenericBool(true, true);
}
else if (inputInt == 3)
{
outputData.setGenericChar(127, true);
}
else if (inputInt == 4)
{
outputData.setGenericDouble(3.145, true);
}
else if (inputInt == 5)
{
outputData.setGenericFloat((float)9.98, true);
}
else if (inputInt == 6)
{
outputData.setGenericShort(3245, true);
}
else if (inputInt == 7)
{
outputData.setGenericInt(32768, true);
}
else if (inputInt == 8)
{
MFnNumericData numericData = new MFnNumericData();
MObject obj = numericData.create(MFnNumericData.Type.k2Float);
numericData.setData((float)1.5, (float)6.7);
outputData.set(obj);
}
else if (inputInt == 9)
{
MFnNumericData numericData = new MFnNumericData();
MObject obj = numericData.create(MFnNumericData.Type.k3Float);
numericData.setData((float)2.5, (float)8.7, (float)2.3345);
outputData.set(obj);
}
else if (inputInt == 10)
{
outputData.setGenericInt(909, true);
}
// Mark the data clean
outputData.setClean();
dataBlock.setClean(gOutputFloat_2Float_3Float);
}
}
else
{
return(false);
}
return(true);
}
//
// Description
//
// Compute the outputSurface attribute.
//
// If there is no history, use cachedSurface as the
// input surface. All tweaks will get written directly
// to it. Output is just a copy of the cached surface
// that can be connected etc.
//
public void computeOutputSurface( MPlug plug, MDataBlock datablock )
{
// Check for an input surface. The input surface, if it
// exists, is copied to the cached surface.
//
computeInputSurface( plug, datablock );
// Get a handle to the cached data
//
MDataHandle cachedHandle = datablock.outputValue( cachedSurface );
apiMeshData cached = cachedHandle.asPluginData as apiMeshData;
if ( null == cached ) {
MGlobal.displayInfo( "NULL cachedSurface data found" );
}
datablock.setClean( plug );
// Apply any vertex offsets.
//
if ( hasHistory() ) {
applyTweaks( datablock, cached.fGeometry );
}
else {
MArrayDataHandle cpHandle = datablock.inputArrayValue( mControlPoints );
cpHandle.setAllClean();
}
// Create some output data
//
MFnPluginData fnDataCreator = new MFnPluginData();
fnDataCreator.create(new MTypeId(apiMeshData.id));
apiMeshData newData = (apiMeshData)fnDataCreator.data();
// Copy the data
//
if ( null != cached ) {
newData.fGeometry = cached.fGeometry;
}
else {
MGlobal.displayInfo( "computeOutputSurface: NULL cachedSurface data" );
}
// Assign the new data to the outputSurface handle
//
MDataHandle outHandle = datablock.outputValue( outputSurface );
outHandle.set( newData );
// Update the bounding box attributes
//
computeBoundingBox( datablock );
}
private unsafe void apply(
MDataBlock block,
uint receptorSize,
MDoubleArray magnitudeArray,
MDoubleArray magnitudeOwnerArray,
MVectorArray directionArray,
MVectorArray directionOwnerArray,
MVectorArray outputForce
)
//
// Compute output force for each particle. If there exists the
// corresponding per particle attribute, use the data passed from
// particle shape (stored in magnitudeArray and directionArray).
// Otherwise, use the attribute value from the field.
//
{
// get the default values
MVector defaultDir = direction(block);
double defaultMag = magnitude(block);
uint magArraySize = magnitudeArray.length;
uint dirArraySize = directionArray.length;
uint magOwnerArraySize = magnitudeOwnerArray.length;
uint dirOwnerArraySize = directionOwnerArray.length;
uint numOfOwner = magOwnerArraySize;
if (dirOwnerArraySize > numOfOwner)
{
numOfOwner = dirOwnerArraySize;
}
double m_magnitude = defaultMag;
MVector m_direction = defaultDir;
for (int ptIndex = 0; ptIndex < receptorSize; ptIndex++)
{
if (receptorSize == magArraySize)
{
m_magnitude = magnitudeArray[ptIndex];
}
if (receptorSize == dirArraySize)
{
m_direction = directionArray[ptIndex];
}
if (numOfOwner > 0)
{
for (int nthOwner = 0; nthOwner < numOfOwner; nthOwner++)
{
if (magOwnerArraySize == numOfOwner)
{
m_magnitude = magnitudeOwnerArray[nthOwner];
}
if (dirOwnerArraySize == numOfOwner)
{
m_direction = directionOwnerArray[nthOwner];
}
outputForce.append(m_direction * m_magnitude);
}
}
else
{
outputForce.append(m_direction * m_magnitude);
}
}
}
//
// Calls applyRotationLocks && applyRotationLimits
// This method verifies that the passed value can be set on the
// rotate plugs. In the base class, limits as well as locking are
// checked by this method.
//
// The compute, validateAndSetValue, and rotateTo functions
// all use this method.
//
protected override void checkAndSetRotation(MDataBlock block, MPlug plug, MEulerRotation newRotation, MSpace.Space space)
{
MDGContext context = block.context;
updateMatrixAttrs(context);
MEulerRotation outRotation = newRotation;
if (context.isNormal)
{
// For easy reading.
//
MPxTransformationMatrix xformMat = baseTransformationMatrix;
// Get the current translation in transform space for
// clamping and locking.
//
MEulerRotation savedRotation =
xformMat.eulerRotation(MSpace.Space.kTransform);
// Translate to transform space, since the limit test needs the
// values in transform space. The locking test needs the values
// in the same space as the savedR value - which is transform
// space as well.
//
baseTransformationMatrix.rotateTo(newRotation, space);
outRotation = xformMat.eulerRotation(MSpace.Space.kTransform);
// Now that everything is in the same space, apply limits
// and change the value to adhere to plug locking.
//
outRotation = applyRotationLimits(outRotation, block);
outRotation = applyRotationLocks(outRotation, savedRotation);
// The value that remain is in transform space.
//
xformMat.rotateTo(outRotation, MSpace.Space.kTransform);
// Get the value that was just set. It needs to be in transform
// space since it is used to set the datablock values at the
// end of this method. Getting the vaolue right before setting
// ensures that the transformation matrix and data block will
// be synchronized.
//
outRotation = xformMat.eulerRotation(MSpace.Space.kTransform);
}
else
{
// Get the rotation for clamping and locking. This will get the
// rotate value in transform space.
//
double[] s3 = block.inputValue(rotate).Double3;
MEulerRotation savedRotation = new MEulerRotation(s3[0], s3[1], s3[2]);
// Create a local transformation matrix for non-normal context
// calculations.
//
MPxTransformationMatrix local = createTransformationMatrix();
if (null == local)
{
throw new InvalidOperationException("rockingTransformCheck::checkAndSetRotation internal error");
}
// Fill the newly created transformation matrix.
//
computeLocalTransformation(local, block);
// Translate the values to transform space. This will allow the
// limit and locking tests to work properly.
//
local.rotateTo(newRotation, space);
outRotation = local.eulerRotation(MSpace.Space.kTransform);
// Apply limits
//
outRotation = applyRotationLimits(outRotation, block);
outRotation = applyRotationLocks(outRotation, savedRotation);
local.rotateTo(outRotation, MSpace.Space.kTransform);
// Get the rotate value in transform space for placement in the
// data block.
//
outRotation = local.eulerRotation(MSpace.Space.kTransform);
local.Dispose();
}
MDataHandle handle = block.outputValue(plug);
if (plug.equalEqual(rotate))
{
handle.set(outRotation.x, outRotation.y, outRotation.z);
}
else if (plug.equalEqual(rotateX))
{
handle.set(outRotation.x);
}
else if (plug.equalEqual(rotateY))
{
handle.set(outRotation.y);
}
else
{
handle.set(outRotation.z);
}
return;
}
protected override MEulerRotation applyRotationLimits(MEulerRotation unlimitedRotation, MDataBlock block)
{
//
// For demonstration purposes we limit the rotation to 60
// degrees and bypass the rotation limit attributes
//
DegreeRadianConverter conv = new DegreeRadianConverter();
double degrees = conv.radiansToDegrees(unlimitedRotation.x);
if (degrees < 60)
{
return(unlimitedRotation);
}
MEulerRotation euler = new MEulerRotation();
euler.x = conv.degreesToRadians(60.0);
return(euler);
}
private MVector direction(MDataBlock block)
{
MFloatVector fV = block.inputValue(mDirection).asFloatVector;
return(new MVector(fV.x, fV.y, fV.z));
}
public override bool compute(MPlug plug, MDataBlock datablock)
// Since there are no output attributes this is not necessary but
// if we wanted to compute an output mesh for rendering it would
// be done here base on the inputs.
{
return false;
}
//
// Description
//
// This function takes an input surface of type kMeshData and converts
// the geometry into this nodes attributes.
// Returns false if nothing is connected.
//
public bool computeInputMesh(MPlug plug,
MDataBlock datablock,
MPointArray vertices,
MIntArray counts,
MIntArray connects,
MVectorArray normals,
apiMeshGeomUV uvs)
{
// Get the input subdiv
//
MDataHandle inputData = datablock.inputValue(inputMesh);
MObject surf = inputData.asMesh;
// Check if anything is connected
//
MObject thisObj = thisMObject();
MPlug surfPlug = new MPlug(thisObj, inputMesh);
if (!surfPlug.isConnected)
{
datablock.setClean(plug);
return(false);
}
// Extract the mesh data
//
MFnMesh surfFn = new MFnMesh(surf);
surfFn.getPoints(vertices, MSpace.Space.kObject);
// Check to see if we have UVs to copy.
//
bool hasUVs = surfFn.numUVsProperty > 0;
surfFn.getUVs(uvs.ucoord, uvs.vcoord);
for (int i = 0; i < surfFn.numPolygons; i++)
{
MIntArray polyVerts = new MIntArray();
surfFn.getPolygonVertices(i, polyVerts);
int pvc = (int)polyVerts.length;
counts.append(pvc);
int uvId;
for (int v = 0; v < pvc; v++)
{
if (hasUVs)
{
surfFn.getPolygonUVid(i, v, out uvId);
uvs.faceVertexIndex.append(uvId);
}
connects.append(polyVerts[v]);
}
}
for (int n = 0; n < (int)vertices.length; n++)
{
MVector normal = new MVector();
surfFn.getVertexNormal(n, normal);
normals.append(normal);
}
return(true);
}
public override bool compute(MPlug plug, MDataBlock block)
{
if (plug.equalEqual(constraintGeometry))
{
//
block.inputValue(constraintParentInverseMatrix);
//
MArrayDataHandle targetArray = block.inputArrayValue(compoundTarget);
uint targetArrayCount = targetArray.elementCount();
double weight, selectedWeight = 0;
if (weightType == GeometrySurfaceConstraintCommand.ConstraintType.kSmallestWeight)
{
selectedWeight = float.MaxValue;
}
MObject selectedMesh = null;
uint i;
for (i = 0; i < targetArrayCount; i++)
{
MDataHandle targetElement = targetArray.inputValue();
weight = targetElement.child(targetWeight).asDouble;
if (!equivalent(weight, 0.0))
{
if (weightType == GeometrySurfaceConstraintCommand.ConstraintType.kLargestWeight)
{
if (weight > selectedWeight)
{
MObject mesh = targetElement.child(targetGeometry).asMesh;
if (!mesh.isNull)
{
selectedMesh = mesh;
selectedWeight = weight;
}
}
}
else
{
if (weight < selectedWeight)
{
MObject mesh = targetElement.child(targetGeometry).asMesh;
if (!mesh.isNull)
{
selectedMesh = mesh;
selectedWeight = weight;
}
}
}
}
targetArray.next();
}
//
if (selectedMesh == null)
{
block.setClean(plug);
}
else
{
// The transform node via the geometry attribute will take care of
// updating the location of the constrained geometry.
MDataHandle outputConstraintGeometryHandle = block.outputValue(constraintGeometry);
outputConstraintGeometryHandle.setMObject(selectedMesh);
}
}
else
{
return(false);
}
return(true);
}
//
// Description:
// Computes a color value
// from a surface noraml angle.
//
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
if ((plug.notEqual(aOutColor)) && (plug.parent.notEqual(aOutColor)))
return false;
MFloatVector resultColor;
MFloatVector walkable = dataBlock.inputValue( aColor1 ).asFloatVector;
MFloatVector nonWalkable = dataBlock.inputValue( aColor2 ).asFloatVector;
MFloatVector surfaceNormal = dataBlock.inputValue( aTriangleNormalCamera ).asFloatVector;
MFloatMatrix viewMatrix = dataBlock.inputValue( aMatrixEyeToWorld ).asFloatMatrix;
float angle = dataBlock.inputValue( aAngle ).asFloat;
// Normalize the view vector
//
surfaceNormal.normalize();
MFloatVector WSVector = surfaceNormal.multiply(viewMatrix);
// find dot product
//
float scalarNormal = WSVector.multiply(new MFloatVector(0, 1, 0));
// take the absolute value
//
if (scalarNormal < 0.0)
scalarNormal *= -1.0f;
if(Math.Cos(angle*AWdegreesToRadians) < scalarNormal)
resultColor = walkable;
else
resultColor = nonWalkable;
// set ouput color attribute
//
MDataHandle outColorHandle = dataBlock.outputValue( aOutColor );
MFloatVector outColor = outColorHandle.asFloatVector;
outColor = resultColor;
outColorHandle.setClean();
return true;
}
// Since there are no output attributes this is not necessary but
// if we wanted to compute an output mesh for rendering it would
// be done here base on the inputs.
public override bool compute(MPlug plug, MDataBlock datablock)
{
return false;
}
public override bool compute(MPlug plug, MDataBlock datablock)
//
// Description
//
// When input attributes are dirty this method will be called to
// recompute the output attributes.
//
{
if (plug.attribute.equalEqual(outputSurface))
{
// Create some user-defined geometry data and access the
// geometry so that we can set it
//
MFnPluginData fnDataCreator = new MFnPluginData();
fnDataCreator.create(new MTypeId(apiMeshData.id));
apiMeshData meshData = (apiMeshData)fnDataCreator.data();
apiMeshGeom meshGeom = meshData.fGeometry;
// If there is an input mesh then copy it's values
// and construct some apiMeshGeom for it.
//
bool hasHistory = computeInputMesh(plug,
datablock,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords);
// There is no input mesh so check the shapeType attribute
// and create either a cube or a sphere.
//
if (!hasHistory)
{
MDataHandle sizeHandle = datablock.inputValue(size);
double shape_size = sizeHandle.asDouble;
MDataHandle typeHandle = datablock.inputValue(shapeType);
short shape_type = typeHandle.asShort;
switch (shape_type)
{
case 0: // build a cube
buildCube(shape_size,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords
);
break;
case 1: // build a sphere
buildSphere(shape_size,
32,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords
);
break;
} // end switch
}
meshGeom.faceCount = meshGeom.face_counts.length;
// Assign the new data to the outputSurface handle
//
MDataHandle outHandle = datablock.outputValue(outputSurface);
outHandle.set(meshData);
datablock.setClean(plug);
return(true);
}
return(false);
}
private MVector direction(MDataBlock block)
{
MFloatVector fV = block.inputValue(mDirection).asFloatVector;
return new MVector(fV.x, fV.y, fV.z);
}
//
// Description
//
// Check the controlPoints array. If there is input history
// then we will use this array to store tweaks (vertex movements).
//
public void buildControlPoints(MDataBlock datablock, int count)
{
MArrayDataHandle cpH = datablock.outputArrayValue( mControlPoints );
MArrayDataBuilder oldBuilder = cpH.builder();
if ( count != (int)oldBuilder.elementCount )
{
// Make and set the new builder based on the
// info from the old builder.
MArrayDataBuilder builder = new MArrayDataBuilder( oldBuilder );
cpH.set( builder );
}
cpH.setAllClean();
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
//
// Descriptions:
// compute output force.
//
{
if (plug.notEqual(mOutputForce))
return false;
// get the logical index of the element this plug refers to.
//
uint multiIndex = plug.logicalIndex;
// Get input data handle, use outputArrayValue since we do not
// want to evaluate both inputs, only the one related to the
// requested multiIndex. Evaluating both inputs at once would cause
// a dependency graph loop.
MArrayDataHandle hInputArray = dataBlock.outputArrayValue(mInputData);
hInputArray.jumpToElement(multiIndex);
// get children of aInputData.
MDataHandle hCompond = hInputArray.inputValue();
MDataHandle hPosition = hCompond.child(mInputPositions);
MObject dPosition = hPosition.data();
MFnVectorArrayData fnPosition = new MFnVectorArrayData(dPosition);
MVectorArray points = fnPosition.array();
// The attribute mInputPPData contains the attribute in an array form
// prepared by the particleShape if the particleShape has per particle
// attribute fieldName_attrName.
//
// Suppose a field with the name dynExprField1 is connecting to
// particleShape1, and the particleShape1 has per particle float attribute
// dynExprField1_magnitude and vector attribute dynExprField1_direction,
// then hInputPPArray will contains a MdoubleArray with the corresponding
// name "magnitude" and a MvectorArray with the name "direction". This
// is a mechanism to allow the field attributes being driven by dynamic
// expression.
MArrayDataHandle mhInputPPData = dataBlock.inputArrayValue(mInputPPData);
mhInputPPData.jumpToElement(multiIndex);
MDataHandle hInputPPData = mhInputPPData.inputValue();
MObject dInputPPData = hInputPPData.data();
MFnArrayAttrsData inputPPArray = new MFnArrayAttrsData(dInputPPData);
MDataHandle hOwnerPPData = dataBlock.inputValue(mOwnerPPData);
MObject dOwnerPPData = hOwnerPPData.data();
MFnArrayAttrsData ownerPPArray = new MFnArrayAttrsData(dOwnerPPData);
string magString = "magnitude";
MFnArrayAttrsData.Type doubleType = MFnArrayAttrsData.Type.kDoubleArray;
bool arrayExist;
MDoubleArray magnitudeArray;
arrayExist = inputPPArray.checkArrayExist(magString, out doubleType);
if (arrayExist)
{
magnitudeArray = inputPPArray.getDoubleData(magString);
}
else
{
magnitudeArray = new MDoubleArray();
}
MDoubleArray magnitudeOwnerArray;
arrayExist = ownerPPArray.checkArrayExist(magString, out doubleType);
if (arrayExist)
{
magnitudeOwnerArray = ownerPPArray.getDoubleData(magString);
}
else
{
magnitudeOwnerArray = new MDoubleArray();
}
string dirString = "direction";
MFnArrayAttrsData.Type vectorType = MFnArrayAttrsData.Type.kVectorArray;
MVectorArray directionArray;
arrayExist = inputPPArray.checkArrayExist(dirString, out vectorType);
if (arrayExist)
{
directionArray = inputPPArray.getVectorData(dirString);
}
else
{
directionArray = new MVectorArray();
}
MVectorArray directionOwnerArray;
arrayExist = ownerPPArray.checkArrayExist(dirString, out vectorType);
if (arrayExist)
{
directionOwnerArray = ownerPPArray.getVectorData(dirString);
}
else
{
directionOwnerArray = new MVectorArray();
}
// Compute the output force.
//
MVectorArray forceArray = new MVectorArray();
apply(dataBlock, points.length, magnitudeArray, magnitudeOwnerArray,
directionArray, directionOwnerArray, forceArray);
// get output data handle
//
MArrayDataHandle hOutArray = dataBlock.outputArrayValue(mOutputForce);
MArrayDataBuilder bOutArray = hOutArray.builder();
// get output force array from block.
//
MDataHandle hOut = bOutArray.addElement(multiIndex);
MFnVectorArrayData fnOutputForce = new MFnVectorArrayData();
MObject dOutputForce = fnOutputForce.create(forceArray);
// update data block with new output force data.
//
hOut.set(dOutputForce);
dataBlock.setClean(plug);
return true;
}
//
// Description
//
// Use the larges/smallest vertex positions to set the corners
// of the bounding box.
//
public void computeBoundingBox( MDataBlock datablock )
{
// Update bounding box
//
MDataHandle lowerHandle = datablock.outputValue( bboxCorner1 );
MDataHandle upperHandle = datablock.outputValue( bboxCorner2 );
double[] lower = lowerHandle.Double3;
double[] upper = upperHandle.Double3;
apiMeshGeom geomPtr = meshGeom();
uint cnt = geomPtr.vertices.length;
if ( cnt == 0 ) return;
// This clears any old bbox values
//
MPoint tmppnt = geomPtr.vertices[0];
lower[0] = tmppnt[0]; lower[1] = tmppnt[1]; lower[2] = tmppnt[2];
upper[0] = tmppnt[0]; upper[1] = tmppnt[1]; upper[2] = tmppnt[2];
for ( int i=0; i<cnt; i++ )
{
MPoint pnt = geomPtr.vertices[i];
if ( pnt[0] < lower[0] ) lower[0] = pnt[0];
if ( pnt[1] < lower[1] ) lower[1] = pnt[1];
if ( pnt[2] > lower[2] ) lower[2] = pnt[2];
if ( pnt[0] > upper[0] ) upper[0] = pnt[0];
if ( pnt[1] > upper[1] ) upper[1] = pnt[1];
if ( pnt[2] < upper[2] ) upper[2] = pnt[2];
}
lowerHandle.Double3 = lower;
lowerHandle.setClean();
upperHandle.Double3 = upper;
upperHandle.setClean();
// Signal that the bounding box has changed.
//
childChanged(MPxSurfaceShape.MChildChanged.kBoundingBoxChanged);
}
//
// Calls applyRotationLocks && applyRotationLimits
// This method verifies that the passed value can be set on the
// rotate plugs. In the base class, limits as well as locking are
// checked by this method.
//
// The compute, validateAndSetValue, and rotateTo functions
// all use this method.
//
protected override void checkAndSetRotation(MDataBlock block, MPlug plug, MEulerRotation newRotation, MSpace.Space space)
{
MDGContext context = block.context;
updateMatrixAttrs(context);
MEulerRotation outRotation = newRotation;
if (context.isNormal) {
// For easy reading.
//
MPxTransformationMatrix xformMat = baseTransformationMatrix;
// Get the current translation in transform space for
// clamping and locking.
//
MEulerRotation savedRotation =
xformMat.eulerRotation(MSpace.Space.kTransform);
// Translate to transform space, since the limit test needs the
// values in transform space. The locking test needs the values
// in the same space as the savedR value - which is transform
// space as well.
//
baseTransformationMatrix.rotateTo(newRotation, space);
outRotation = xformMat.eulerRotation(MSpace.Space.kTransform);
// Now that everything is in the same space, apply limits
// and change the value to adhere to plug locking.
//
outRotation = applyRotationLimits(outRotation, block);
outRotation = applyRotationLocks(outRotation, savedRotation);
// The value that remain is in transform space.
//
xformMat.rotateTo(outRotation, MSpace.Space.kTransform);
// Get the value that was just set. It needs to be in transform
// space since it is used to set the datablock values at the
// end of this method. Getting the vaolue right before setting
// ensures that the transformation matrix and data block will
// be synchronized.
//
outRotation = xformMat.eulerRotation(MSpace.Space.kTransform);
}
else
{
// Get the rotation for clamping and locking. This will get the
// rotate value in transform space.
//
double[] s3 = block.inputValue(rotate).Double3;
MEulerRotation savedRotation = new MEulerRotation(s3[0], s3[1], s3[2]);
// Create a local transformation matrix for non-normal context
// calculations.
//
MPxTransformationMatrix local = createTransformationMatrix();
if (null == local)
{
throw new InvalidOperationException("rockingTransformCheck::checkAndSetRotation internal error");
}
// Fill the newly created transformation matrix.
//
computeLocalTransformation(local, block);
// Translate the values to transform space. This will allow the
// limit and locking tests to work properly.
//
local.rotateTo(newRotation, space);
outRotation = local.eulerRotation(MSpace.Space.kTransform);
// Apply limits
//
outRotation = applyRotationLimits(outRotation, block);
outRotation = applyRotationLocks(outRotation, savedRotation);
local.rotateTo(outRotation, MSpace.Space.kTransform);
// Get the rotate value in transform space for placement in the
// data block.
//
outRotation = local.eulerRotation(MSpace.Space.kTransform);
local.Dispose();
}
MDataHandle handle = block.outputValue(plug);
if (plug.equalEqual(rotate)) {
handle.set(outRotation.x, outRotation.y, outRotation.z);
} else if (plug.equalEqual(rotateX)) {
handle.set(outRotation.x);
} else if (plug.equalEqual(rotateY)) {
handle.set(outRotation.y);
} else {
handle.set(outRotation.z);
}
return;
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
//
// Descriptions:
// compute output force.
//
{
if (plug.notEqual(mOutputForce))
{
return(false);
}
// get the logical index of the element this plug refers to.
//
uint multiIndex = plug.logicalIndex;
// Get input data handle, use outputArrayValue since we do not
// want to evaluate both inputs, only the one related to the
// requested multiIndex. Evaluating both inputs at once would cause
// a dependency graph loop.
MArrayDataHandle hInputArray = dataBlock.outputArrayValue(mInputData);
hInputArray.jumpToElement(multiIndex);
// get children of aInputData.
MDataHandle hCompond = hInputArray.inputValue();
MDataHandle hPosition = hCompond.child(mInputPositions);
MObject dPosition = hPosition.data();
MFnVectorArrayData fnPosition = new MFnVectorArrayData(dPosition);
MVectorArray points = fnPosition.array();
// The attribute mInputPPData contains the attribute in an array form
// prepared by the particleShape if the particleShape has per particle
// attribute fieldName_attrName.
//
// Suppose a field with the name dynExprField1 is connecting to
// particleShape1, and the particleShape1 has per particle float attribute
// dynExprField1_magnitude and vector attribute dynExprField1_direction,
// then hInputPPArray will contains a MdoubleArray with the corresponding
// name "magnitude" and a MvectorArray with the name "direction". This
// is a mechanism to allow the field attributes being driven by dynamic
// expression.
MArrayDataHandle mhInputPPData = dataBlock.inputArrayValue(mInputPPData);
mhInputPPData.jumpToElement(multiIndex);
MDataHandle hInputPPData = mhInputPPData.inputValue();
MObject dInputPPData = hInputPPData.data();
MFnArrayAttrsData inputPPArray = new MFnArrayAttrsData(dInputPPData);
MDataHandle hOwnerPPData = dataBlock.inputValue(mOwnerPPData);
MObject dOwnerPPData = hOwnerPPData.data();
MFnArrayAttrsData ownerPPArray = new MFnArrayAttrsData(dOwnerPPData);
string magString = "magnitude";
MFnArrayAttrsData.Type doubleType = MFnArrayAttrsData.Type.kDoubleArray;
bool arrayExist;
MDoubleArray magnitudeArray;
arrayExist = inputPPArray.checkArrayExist(magString, out doubleType);
if (arrayExist)
{
magnitudeArray = inputPPArray.getDoubleData(magString);
}
else
{
magnitudeArray = new MDoubleArray();
}
MDoubleArray magnitudeOwnerArray;
arrayExist = ownerPPArray.checkArrayExist(magString, out doubleType);
if (arrayExist)
{
magnitudeOwnerArray = ownerPPArray.getDoubleData(magString);
}
else
{
magnitudeOwnerArray = new MDoubleArray();
}
string dirString = "direction";
MFnArrayAttrsData.Type vectorType = MFnArrayAttrsData.Type.kVectorArray;
MVectorArray directionArray;
arrayExist = inputPPArray.checkArrayExist(dirString, out vectorType);
if (arrayExist)
{
directionArray = inputPPArray.getVectorData(dirString);
}
else
{
directionArray = new MVectorArray();
}
MVectorArray directionOwnerArray;
arrayExist = ownerPPArray.checkArrayExist(dirString, out vectorType);
if (arrayExist)
{
directionOwnerArray = ownerPPArray.getVectorData(dirString);
}
else
{
directionOwnerArray = new MVectorArray();
}
// Compute the output force.
//
MVectorArray forceArray = new MVectorArray();
apply(dataBlock, points.length, magnitudeArray, magnitudeOwnerArray,
directionArray, directionOwnerArray, forceArray);
// get output data handle
//
MArrayDataHandle hOutArray = dataBlock.outputArrayValue(mOutputForce);
MArrayDataBuilder bOutArray = hOutArray.builder();
// get output force array from block.
//
MDataHandle hOut = bOutArray.addElement(multiIndex);
MFnVectorArrayData fnOutputForce = new MFnVectorArrayData();
MObject dOutputForce = fnOutputForce.create(forceArray);
// update data block with new output force data.
//
hOut.set(dOutputForce);
dataBlock.setClean(plug);
return(true);
}
public void buildControlPoints(MDataBlock datablock, int count)
//
// Description
//
// Check the controlPoints array. If there is input history
// then we will use this array to store tweaks (vertex movements).
//
{
MArrayDataHandle cpH = datablock.outputArrayValue( mControlPoints );
MArrayDataBuilder oldBuilder = cpH.builder();
if ( count != (int)oldBuilder.elementCount )
{
// Make and set the new builder based on the
// info from the old builder.
MArrayDataBuilder builder = new MArrayDataBuilder( oldBuilder );
cpH.set( builder );
}
cpH.setAllClean();
}
override public bool compute(MPlug plug, MDataBlock block)
{
return(true);
}
//
// Description
//
// If the shape has history, apply any tweaks (offsets) made
// to the control points.
//
public void applyTweaks(MDataBlock datablock, apiMeshGeom meshGeom)
{
MArrayDataHandle cpHandle = datablock.inputArrayValue( mControlPoints );
// Loop through the component list and transform each vertex.
//
uint elemCount = cpHandle.elementCount();
for ( uint idx=0; idx<elemCount; idx++ )
{
int elemIndex = (int)cpHandle.elementIndex();
MDataHandle pntHandle = cpHandle.outputValue();
double[] pnt = pntHandle.Double3;
MVector offset = new MVector(pnt[0], pnt[1], pnt[2]);
// Apply the tweaks to the output surface
//
MPoint oldPnt = meshGeom.vertices[elemIndex];
oldPnt = oldPnt.plus( offset );
cpHandle.next();
}
return;
}
public override bool compute(MPlug plug, MDataBlock datablock)
//
// Description
//
// When input attributes are dirty this method will be called to
// recompute the output attributes.
//
// Arguments
//
// plug - the attribute that triggered the compute
// datablock - the nodes data
//
// Returns
//
// kSuccess - this method could compute the dirty attribute,
// kUnknownParameter - the dirty attribute can not be handled at this level
//
{
if ( plug.attribute.equalEqual(outputSurface) ) {
computeOutputSurface( plug, datablock );
return true;
}
else if ( plug.attribute.equalEqual(cachedSurface) ) {
computeOutputSurface( plug, datablock );
return true;
}
else if ( plug.attribute.equalEqual(worldSurface) ) {
computeWorldSurface( plug, datablock );
return true;
}
else {
return false;
}
}
//
// Description
//
// When input attributes are dirty this method will be called to
// recompute the output attributes.
//
// Arguments
//
// plug - the attribute that triggered the compute
// datablock - the nodes data
//
// Returns
//
// kSuccess - this method could compute the dirty attribute,
// kUnknownParameter - the dirty attribute can not be handled at this level
//
public override bool compute(MPlug plug, MDataBlock datablock)
{
if ( plug.attribute.equalEqual(outputSurface) ) {
computeOutputSurface( plug, datablock );
return true;
}
else if ( plug.attribute.equalEqual(cachedSurface) ) {
computeOutputSurface( plug, datablock );
return true;
}
else if ( plug.attribute.equalEqual(worldSurface) ) {
computeWorldSurface( plug, datablock );
return true;
}
else {
return false;
}
}
//
// Compute output force for each particle. If there exists the
// corresponding per particle attribute, use the data passed from
// particle shape (stored in magnitudeArray and directionArray).
// Otherwise, use the attribute value from the field.
//
private unsafe void apply(
MDataBlock block,
uint receptorSize,
MDoubleArray magnitudeArray,
MDoubleArray magnitudeOwnerArray,
MVectorArray directionArray,
MVectorArray directionOwnerArray,
MVectorArray outputForce
)
{
// get the default values
MVector defaultDir = direction(block);
double defaultMag = magnitude(block);
uint magArraySize = magnitudeArray.length;
uint dirArraySize = directionArray.length;
uint magOwnerArraySize = magnitudeOwnerArray.length;
uint dirOwnerArraySize = directionOwnerArray.length;
uint numOfOwner = magOwnerArraySize;
if (dirOwnerArraySize > numOfOwner)
numOfOwner = dirOwnerArraySize;
double m_magnitude = defaultMag;
MVector m_direction = defaultDir;
for (int ptIndex = 0; ptIndex < receptorSize; ptIndex++)
{
if (receptorSize == magArraySize)
m_magnitude = magnitudeArray[ptIndex];
if (receptorSize == dirArraySize)
m_direction = directionArray[ptIndex];
if (numOfOwner > 0)
{
for (int nthOwner = 0; nthOwner < numOfOwner; nthOwner++)
{
if (magOwnerArraySize == numOfOwner)
m_magnitude = magnitudeOwnerArray[nthOwner];
if (dirOwnerArraySize == numOfOwner)
m_direction = directionOwnerArray[nthOwner];
outputForce.append(m_direction * m_magnitude);
}
}
else
{
outputForce.append(m_direction * m_magnitude);
}
}
}
//
// Description
//
// If there is input history, evaluate the input attribute
//
public void computeInputSurface( MPlug plug, MDataBlock datablock )
{
// Get the input surface if there is history
//
if ( hasHistory() ) {
MDataHandle inputHandle = datablock.inputValue( inputSurface );
apiMeshData surf = inputHandle.asPluginData as apiMeshData;
if ( null == surf ) {
throw new ArgumentException("NULL inputSurface data found", "datablock");
}
apiMeshGeom geomPtr = surf.fGeometry;
// Create the cachedSurface and copy the input surface into it
//
MFnPluginData fnDataCreator = new MFnPluginData();
fnDataCreator.create(new MTypeId(apiMeshData.id));
apiMeshData newCachedData = (apiMeshData)fnDataCreator.data();
newCachedData.fGeometry = geomPtr;
MDataHandle cachedHandle = datablock.outputValue( cachedSurface );
cachedHandle.set( newCachedData );
}
}
public override bool compute(MPlug plug, MDataBlock datablock)
//
// Description
//
// When input attributes are dirty this method will be called to
// recompute the output attributes.
//
{
if (plug.attribute.equalEqual(outputSurface))
{
// Create some user-defined geometry data and access the
// geometry so that we can set it
//
MFnPluginData fnDataCreator = new MFnPluginData();
fnDataCreator.create(new MTypeId(apiMeshData.id));
apiMeshData meshData = (apiMeshData)fnDataCreator.data();
apiMeshGeom meshGeom = meshData.fGeometry;
// If there is an input mesh then copy it's values
// and construct some apiMeshGeom for it.
//
bool hasHistory = computeInputMesh(plug,
datablock,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords);
// There is no input mesh so check the shapeType attribute
// and create either a cube or a sphere.
//
if ( !hasHistory )
{
MDataHandle sizeHandle = datablock.inputValue(size);
double shape_size = sizeHandle.asDouble;
MDataHandle typeHandle = datablock.inputValue(shapeType);
short shape_type = typeHandle.asShort;
switch( shape_type )
{
case 0 : // build a cube
buildCube(shape_size,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords
);
break;
case 1 : // build a sphere
buildSphere(shape_size,
32,
meshGeom.vertices,
meshGeom.face_counts,
meshGeom.face_connects,
meshGeom.normals,
meshGeom.uvcoords
);
break;
} // end switch
}
meshGeom.faceCount = meshGeom.face_counts.length;
// Assign the new data to the outputSurface handle
//
MDataHandle outHandle = datablock.outputValue(outputSurface);
outHandle.set(meshData);
datablock.setClean(plug);
return true;
}
return false;
}
//
// Description
//
// Compute the worldSurface attribute.
//
public void computeWorldSurface( MPlug plug, MDataBlock datablock )
{
computeOutputSurface( plug, datablock );
MDataHandle inHandle = datablock.outputValue( outputSurface );
apiMeshData outSurf = inHandle.asPluginData as apiMeshData;
if ( null == outSurf ) {
throw new ArgumentException("computeWorldSurface: outSurf NULL", "datablock");
}
// Create some output data
//
MFnPluginData fnDataCreator = new MFnPluginData();
fnDataCreator.create(new MTypeId(apiMeshData.id));
apiMeshData newData = (apiMeshData)fnDataCreator.data();
// Get worldMatrix from MPxSurfaceShape and set it to MPxGeometryData
MMatrix worldMat = getWorldMatrix(datablock, 0);
newData.matrix(worldMat);
// Copy the data
//
newData.fGeometry = outSurf.fGeometry;
// Assign the new data to the outputSurface handle
//
uint arrayIndex = plug.logicalIndex;
MArrayDataHandle worldHandle = datablock.outputArrayValue( worldSurface );
MArrayDataBuilder builder = worldHandle.builder();
MDataHandle outHandle = builder.addElement( arrayIndex );
outHandle.set( newData );
}
public override bool compute(MPlug plug, MDataBlock dataBlock)
{
return true;
}