/// <summary>
/// Validates all properties
/// </summary>
public override void Validate()
{
base.Validate();
TemperatureSettings.Validate();
if (LiftBuildSettings != null)
{
LiftBuildSettings.Validate();
}
if (Filter != null)
{
Filter.Validate();
}
if (OverrideStartUTC.HasValue || OverrideEndUTC.HasValue)
{
if (OverrideStartUTC.HasValue && OverrideEndUTC.HasValue)
{
if (OverrideStartUTC.Value > OverrideEndUTC.Value)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Override startUTC must be earlier than override endUTC"));
}
}
else
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"If using an override date range both dates must be provided"));
}
}
}
/// <summary>
/// Validates the request and throws if validation fails.
/// </summary>
public override void Validate()
{
const int NUM_TOLERANCES = 7;
base.Validate();
if (CutFillTolerances?.Length != NUM_TOLERANCES)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
$"{NUM_TOLERANCES} tolerances must be specified for cut-fill details"));
}
Filter?.Validate();
LiftBuildSettings?.Validate();
if (DesignDescriptor != null)
{
DesignDescriptor.Validate();
}
else
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Design must be specified for cut-fill details"));
}
}
public override void Validate()
{
LiftBuildSettings?.Validate();
AdditionalSpatialFilter?.Validate();
TopFilter?.Validate();
BaseFilter?.Validate();
}
/// <summary>
/// Validates all properties
/// </summary>
public override void Validate()
{
base.Validate();
LiftBuildSettings?.Validate();
Filter?.Validate();
}
public void ValidatePassCountTargetRangeFailTest()
{
//min pass count target > max pass count target
LiftBuildSettings settings = new LiftBuildSettings(
new CCVRangePercentage(30.0, 70.0), false, 0.0, 0.0, 0.2f, LiftDetectionType.Automatic,
LiftThicknessType.Compacted, new MDPRangePercentage(35.0, 75.0), false, 0.0f, 0, 0,
new TargetPassCountRange(10, 1), new TemperatureWarningLevels(500, 700), false, _liftThicknessTarget, null);
Assert.ThrowsException <ServiceException>(() => settings.Validate());
}
public override void Validate()
{
base.Validate();
ValidatePalettes(Palettes, Mode);
LiftBuildSettings?.Validate();
ValidateDesign(DesignDescriptor, Mode, ComputeVolType);
if (Mode == DisplayMode.VolumeCoverage)
{
ValidateVolumesFilters(ComputeVolType, Filter1, FilterId1, Filter2, FilterId2);
}
}
/// <summary>
/// Validates all properties
/// </summary>
public override void Validate()
{
base.Validate();
ValidatePalettes(Palettes, Mode);
//Compaction settings
LiftBuildSettings?.Validate();
//Volumes
//mode == DisplayMode.VolumeCoverage
//computeVolNoChangeTolerance and computeVolType must be provided but since not nullable types they always will have a value anyway
ValidateDesign(DesignDescriptor, Mode, ComputeVolumesType);
//Summary volumes: v1 has mode VolumeCoverage, v2 has mode CutFill but computeVolType is set
if (Mode == DisplayMode.VolumeCoverage ||
(Mode == DisplayMode.CutFill &&
(ComputeVolumesType == VolumesType.Between2Filters ||
ComputeVolumesType == VolumesType.BetweenDesignAndFilter ||
ComputeVolumesType == VolumesType.BetweenFilterAndDesign)))
{
ValidateVolumesFilters(ComputeVolumesType, this.Filter1, this.FilterId1, this.Filter2, this.FilterId2);
}
if (BoundBoxLatLon == null && BoundBoxGrid == null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Bounding box required either in lat/lng or grid coordinates"));
}
if (BoundBoxLatLon != null && BoundBoxGrid != null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Only one bounding box is allowed"));
}
if (Mode == DisplayMode.TargetThicknessSummary && LiftBuildSettings.LiftThicknessTarget == null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"For this mode LiftThickness Target in LIftBuildSettings must be specified."));
}
if (Mode == DisplayMode.TargetSpeedSummary && LiftBuildSettings.MachineSpeedTarget == null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"For this mode SpeedSummary Target in LiftBuildSettings must be specified."));
}
}
public void ValidateSuccessTest()
{
LiftBuildSettings settings = new LiftBuildSettings(
new CCVRangePercentage(30.0, 70.0), false, 0.0, 0.0, 0.2f, LiftDetectionType.Automatic,
LiftThicknessType.Compacted, new MDPRangePercentage(35.0, 75.0), false, 0.0f, 0, 0, null, null, null, _liftThicknessTarget, null);
settings.Validate();
settings = new LiftBuildSettings(
new CCVRangePercentage(30.0, 70.0), false, 0.0, 0.0, 0.2f, LiftDetectionType.Automatic,
LiftThicknessType.Compacted, new MDPRangePercentage(35.0, 75.0),
true, 2.0f, 140, 125, new TargetPassCountRange(3, 3),
new TemperatureWarningLevels(300, 800), false, _liftThicknessTarget, null);
settings.Validate();
}
/// <summary>
/// Validates properties.
/// </summary>
///
public override void Validate()
{
base.Validate();
// Compaction settings
LiftBuildSettings?.Validate();
if (ReportCutFill)
{
ValidateDesign(DesignFile, DisplayMode.CutFill, VolumesType.None);
}
if (!(ReportPassCount || ReportTemperature || ReportMDP || ReportCutFill || ReportCMV || ReportElevation))
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"There are no selected fields to be reported on"));
}
}
/// <summary>
/// Validates the request and throws if validation fails.
/// </summary>
public override void Validate()
{
base.Validate();
// Validate the profile type...
if (!Enumerable.Range((int)ProductionDataType.All, (int)ProductionDataType.CCVChange + 1).Contains((int)ProfileType))
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
$"Profile type {(int)ProfileType} is out of range. It should be between: {(int)ProductionDataType.All} and {(int)ProductionDataType.CCVChange}."));
}
if (Filter != null)
{
Filter.Validate();
if (FilterID.HasValue && FilterID.Value <= 0)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
$"Filter ID {FilterID.Value} should be greater than zero."));
}
}
if (AlignmentDesign == null && GridPoints == null && WGS84Points == null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Either a linear or alignment based profile must be provided."));
}
if (AlignmentDesign != null && (GridPoints != null || WGS84Points != null))
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"Only one type, either a linear or alignment based profile must be provided."));
}
if (AlignmentDesign != null)
{
// Validate alignment design parts...
if (!StartStation.HasValue || !EndStation.HasValue)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"If using an alignment design for profiling, the alignment file, start and end station must be provided."));
}
AlignmentDesign.Validate();
}
else
{
// Validate profile points...
if (GridPoints != null && WGS84Points != null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"The profile line requires series either grid or WGS84 points."));
}
if (GridPoints == null && WGS84Points == null)
{
throw new ServiceException(HttpStatusCode.BadRequest,
new ContractExecutionResult(ContractExecutionStatesEnum.ValidationError,
"The profile line should be represented by series either grid or WGS84 points, not both."));
}
}
LiftBuildSettings?.Validate();
}