private void AddRowCircle()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
List <Circle> listCircle = mgCircles.GetListCircleOfFirstRow();
List <Circle> listNewCircle = new List <Circle>();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.BlockUnselect(hBlockModel);
//thêm hàng lỗ khoan mới
foreach (var circle in listCircle)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, mgCircles.GetDeltaY(), false, true);
Lcad.BlockUnselect(hBlockModel);
listNewCircle.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listNewCircle);
//thêm lưới tọa độ
if (this.banVeChinh.HienKhoangCach)
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
}
//hiện thông báo
//private void ShowNotifyAutoHide(String text)
//{
// UserControl_Notify note = new UserControl_Notify(text);
// elementHost1.Child = note;
// note.ShowNotifyAutoHide();
//}
//lấy danh sách lỗ khoan trên bản vẽ
private void GetCirlcesFromAutocadFile()
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int hEnt = Lcad.BlockGetFirstEnt(hBlockModel);
List <Circle> listCircles = new List <Circle>();
while (hEnt != 0)
{
int entType = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_TYPE);
if (!Lcad.PropGetBool(hEnt, Lcad.LC_PROP_ENT_DELETED)) //kiểm tra xem ent bị xóa hay không
{
if (entType == Lcad.LC_ENT_CIRCLE)
{
listCircles.Add(new Circle(hEnt));
}
//cách khác (dùng key, vì cái gì đấy mà ko lấy được LC_PROP_ENT_TYPE) - do thư viện....
else
{
int _key = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_KEY);
if (_key == keyCircle)
{
listCircles.Add(new Circle(hEnt));
}
}
}
hEnt = Lcad.BlockGetNextEnt(hBlockModel, hEnt);
}
mgCircles = new ManageCircle();
mgCircles.AddListCircle(listCircles);
}
private void DeleteRowCircle()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
List <Circle> listCircle = mgCircles.GetListCircleOfFirstRow();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.BlockUnselect(hBlockModel);
//xóa hàng lỗ khoan mới
mgCircles.RemoveListCircles(listCircle);
foreach (var circle in listCircle)
{
Lcad.BlockSelectEnt(hBlockModel, circle.GetHandle(), true);
Lcad.BlockSelErase(hBlockModel);
Lcad.BlockUnselect(hBlockModel);
}
//thêm lưới tọa độ
if (this.banVeChinh.HienKhoangCach) //sau them dk vao day
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
}
//dựng lưới kích thước lỗ khoan
private void DungLuoiKichThuoc()
{
//xóa lớp lưới cũ
Lcad.LayerClear(layerLuoiKichThuoc, Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL));
List <Circle> danhSachLoKhoan = mgCircles.GetListCircles();
for (int i = 0; i < danhSachLoKhoan.Count - 1; i++)
{
for (int j = i + 1; j < danhSachLoKhoan.Count; j++)
{
double length = Math.Sqrt(Math.Pow((danhSachLoKhoan[i].GetX() - danhSachLoKhoan[j].GetX()), 2) + Math.Pow((danhSachLoKhoan[i].GetY() - danhSachLoKhoan[j].GetY()), 2));
if (Math.Round(length) == Math.Round(this.banVeChinh.DeltaX))
{
VeKhoangCach(danhSachLoKhoan[i], danhSachLoKhoan[j]);
}
else
{
if (Math.Round(length) == Math.Round(this.banVeChinh.DeltaY))
{
VeKhoangCach(danhSachLoKhoan[i], danhSachLoKhoan[j]);
}
}
}
}
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
private void FormMain_Load(object sender, EventArgs e)
{
//tạo cửa sổ - Windows
hWnd = Lcad.CreateWindow(panelControl_hWnd.Handle, Lcad.LC_WS_VIEWTABS, 0, 0, panelControl_hWnd.Width, panelControl_hWnd.Height);
//tạo cửa sổ - Command
hCmd = Lcad.CreateCmdwin(panelControl_hCmd.Handle, 0, 0, panelControl_hCmd.Width, panelControl_hCmd.Height);
//tạo cửa sổ - Properties
hProp = Lcad.CreatePropwin(splitContainerControl.Panel1.Handle, 0, 0, splitContainerControl.Panel1.Width, splitContainerControl.Panel1.Height);
//liên kết các cửa sổ với nhau
Lcad.WndSetCmdwin(hWnd, hCmd);
Lcad.WndSetPropwin(hWnd, hProp);
//tạo bản vẽ, gán cho cửa sổ LiteCad + đặt tên
hDrw = Lcad.CreateDrawing();
Lcad.DrwNew(hDrw, "", hWnd);
Lcad.WndSetFocus(hWnd);
//lấy giá trị hBlockModel của bản vẽ
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
//điều chỉnh kích thước
Lcad.CmdwinResize(hCmd, 0, 0, panelControl_hCmd.Width, panelControl_hCmd.Height);
Lcad.PropwinResize(hProp, 0, 0, splitContainerControl.Panel1.Width, splitContainerControl.Panel1.Height);
Lcad.WndResize(hWnd, 0, 0, panelControl_hWnd.Width, panelControl_hWnd.Height);
//thêm layer
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
//vẽ lại hình
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
}
//dựng lưới kích thước lỗ khoan - old
private void DungLuoiKichThuoc_old()
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.DrwAddTextStyle(hDrw, "Arial", "Arial");
Lcad.PropPutStr(hDrw, Lcad.LC_PROP_DRW_TEXTSTYLE, "Arial");
List <Circle> danhSachLoKhoan = mgCircles.GetListCircles();
for (int i = 0; i < danhSachLoKhoan.Count - 1; i++)
{
for (int j = i + 1; j < danhSachLoKhoan.Count; j++)
{
int newText = 0, newLine = 0;
if ((danhSachLoKhoan[i].GetX() == danhSachLoKhoan[j].GetX()) && (Math.Round(Math.Abs(danhSachLoKhoan[i].GetY() - danhSachLoKhoan[j].GetY())) == Math.Round(mgCircles.GetDeltaY())))
{
newText = Lcad.BlockAddTextWin2(hBlockModel, mgCircles.GetDeltaY().ToString(), ((danhSachLoKhoan[i].GetX() + danhSachLoKhoan[j].GetX()) / 2), ((danhSachLoKhoan[i].GetY() + danhSachLoKhoan[j].GetY()) / 2), Lcad.LC_TA_CENTER, 0.75, 1, 0, 0);
newLine = Lcad.BlockAddLine(hBlockModel, danhSachLoKhoan[i].GetX(), danhSachLoKhoan[i].GetY(), danhSachLoKhoan[j].GetX(), danhSachLoKhoan[j].GetY());
}
if ((danhSachLoKhoan[i].GetY() == danhSachLoKhoan[j].GetY()) && (Math.Round(Math.Abs(danhSachLoKhoan[i].GetX() - danhSachLoKhoan[j].GetX())) == Math.Round(mgCircles.GetDeltaX())))
{
newText = Lcad.BlockAddTextWin2(hBlockModel, mgCircles.GetDeltaX().ToString(), ((danhSachLoKhoan[i].GetX() + danhSachLoKhoan[j].GetX()) / 2), ((danhSachLoKhoan[i].GetY() + danhSachLoKhoan[j].GetY()) / 2), Lcad.LC_TA_CENTER, 0.75, 1, 0, 0);
newLine = Lcad.BlockAddLine(hBlockModel, danhSachLoKhoan[i].GetX(), danhSachLoKhoan[i].GetY(), danhSachLoKhoan[j].GetX(), danhSachLoKhoan[j].GetY());
}
Lcad.PropPutStr(newText, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
Lcad.PropPutStr(newLine, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
}
}
}
//tính toán khoanh vùng
private void KhoanhVungLoKhoan()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
double xMax, xMin, yMax, yMin;
if (xFirstPoint > xLastPoint)
{
xMax = xFirstPoint;
xMin = xLastPoint;
}
else
{
xMax = xLastPoint;
xMin = xFirstPoint;
}
if (yFirstPoint > yLastPoint)
{
yMax = yFirstPoint;
yMin = yLastPoint;
}
else
{
yMax = yLastPoint;
yMin = yFirstPoint;
}
List <Circle> listCircle = mgCircles.GetListCircles();
List <Circle> listRemoveCircle = new List <Circle>();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (Circle value in listCircle)
{
if (value.GetX() > xMax || value.GetX() < xMin || value.GetY() > yMax || value.GetY() < yMin)
{
listRemoveCircle.Add(value);
Lcad.BlockSelectEnt(hBlockModel, value.GetHandle(), true);
Lcad.BlockSelErase(hBlockModel);
Lcad.BlockUnselect(hBlockModel);
}
}
//xóa danh sách nằm ngoài
mgCircles.RemoveListCircles(listRemoveCircle);
//vẽ lại lưới tọa độ
if (this.banVeChinh.HienKhoangCach) //sau them dk vao day
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
SendKeys.Send("{ESC}");
}
}
private void VeKhoangCach(Circle c1, Circle c2)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.DrwAddTextStyle(hDrw, "Arial", "Arial");
Lcad.PropPutStr(hDrw, Lcad.LC_PROP_DRW_TEXTSTYLE, "Arial");
int newText = 0, newLine = 0;
newText = Lcad.BlockAddTextWin2(hBlockModel, this.banVeChinh.DeltaX.ToString(), ((c1.GetX() + c2.GetX()) / 2), ((c1.GetY() + c2.GetY()) / 2), Lcad.LC_TA_CENTER, 0.75, 1, 0, 0);
newLine = Lcad.BlockAddLine(hBlockModel, c1.GetX(), c1.GetY(), c2.GetX(), c2.GetY());
Lcad.PropPutStr(newText, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
Lcad.PropPutStr(newLine, Lcad.LC_PROP_ENT_LAYER, "LuoiKichThuoc");
}
private void loadFile_FormMoBanVeDatabase(String idHoChieu)
{
this.hoChieuChinh = BS_HoChieu.HoChieu(idHoChieu);
this.banVeChinh = BS_BanVe.BanVe(this.hoChieuChinh.MaBanVe);
List <LoKhoan> danhSachLoKhoan = BS_LoKhoan.DanhSachLoKhoan(idHoChieu);
List <Circle> danhSachCircle = new List <Circle>();
mgCircles = new ManageCircle();
//dựng bản vẽ mới
//this.banVeChinh.HienKhoangCach = false;
this.Text = "Bản vẽ: [" + this.banVeChinh.TenBanVe + "]";
Lcad.DrwLoad(hDrw, BS_Template.ChonTemplate(this.banVeChinh.Template).DuongDan, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (LoKhoan value in danhSachLoKhoan)
{
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, value.ToaDoX, value.ToaDoY, value.BanKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_ID, int.Parse(value.MaLoKhoan));
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
danhSachCircle.Add(new Circle(hEntCircle));
}
mgCircles.AddListCircle(danhSachCircle);
if (banVeChinh.HienKhoangCach)
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//vẽ lại hình
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, this.banVeChinh.TenBanVe + " - đã mở");
//mở form dựng lưới lỗ khoan
if (mgCircles.GetListCircles().Count == 0)
{
FormXayDungLoKhoan fm = new FormXayDungLoKhoan();
fm.MyGetData = new FormXayDungLoKhoan.GetData(loadFile_FormXayDungLoKhoan);
fm.Show();
}
}
private void barButtonItem_Move_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
//select toàn bộ lỗ khoan
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
int hEnt = Lcad.BlockGetFirstEnt(hBlockModel);
List <Circle> listCircles = new List <Circle>();
while (hEnt != 0)
{
int entType = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_TYPE);
if (!Lcad.PropGetBool(hEnt, Lcad.LC_PROP_ENT_DELETED)) //kiểm tra xem ent bị xóa hay không
{
if (entType == Lcad.LC_ENT_CIRCLE)
{
Lcad.BlockSelectEnt(hBlockModel, hEnt, true);
}
//cách khác (dùng key, vì cái gì đấy mà ko lấy được LC_PROP_ENT_TYPE) - do thư viện....
else
{
int _key = Lcad.PropGetInt(hEnt, Lcad.LC_PROP_ENT_KEY);
if (_key == keyCircle)
{
Lcad.BlockSelectEnt(hBlockModel, hEnt, true);
}
}
}
hEnt = Lcad.BlockGetNextEnt(hBlockModel, hEnt);
}
//chạy hàm move
bool flag = Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_MOVE, 0);
if (flag)
{
mgCircles = new ManageCircle();
GetCirlcesFromAutocadFile();
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
}
}
//
private void barButtonItem_HoChieuNoMin_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORBACKM, int.Parse("FFFFFF", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORFOREM, int.Parse("000000", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutStr(layerLoMin, Lcad.LC_PROP_LAYER_COLOR, "blue");
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
int hView = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_VIEW);
String fullPath = Path.GetFullPath(Path.Combine((@"" + Application.StartupPath), @"..\..\"));
Lcad.ViewRasterize(hView, fullPath + "Template\\ViewTemp.bmp", 0, 0, 0, 0, 10);
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORBACKM, int.Parse("000000", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORFOREM, int.Parse("FFFFFF", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutStr(layerLoMin, Lcad.LC_PROP_LAYER_COLOR, "cyan");
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
FormBaoCaoThongKe fm = new FormBaoCaoThongKe(hoChieuChinh);
fm.Show();
}
private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
else
{
Lcad.LayerClear(layerLoMin, hBlockModel);
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
mgCircles = new ManageCircle();
}
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, Xdrw, Ydrw, banKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
Lcad.BlockUnselect(hBlockModel);
//tạo danh sách cột đầu tiên
List <Circle> listCotDau = new List <Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//tạo cột đầu tiên từ điểm gốc (số điểm trong cột ứng với số hàng trừ đi điểm gốc)
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, listCotDau[i].GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//thêm các cột còn lại (ứng với số cột trừ đi cột đầu)
for (int i = 0; i < soCot - 1; i++)
{
List <Circle> listCotGanNhat = new List <Circle>();
List <Circle> listCotMoi = new List <Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
//hiển thị lưới kích thước
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
//load lại
//MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
LuuHoChieu(this.hoChieuChinh.MaHoChieu); //ăn gian...
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Xây dựng lưới lỗ khoan - hoàn thành");
}
//test
private void button1_Click(object sender, EventArgs e)
{
int hView = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_VIEW);
Lcad.ViewRasterize(hView, @"E:\Sample1.bmp", 0, 0, 0, 0, 10);
}
