//保存
protected override void UpdateDomainObject(object domainObject)
{
if (_InventoryFacade == null)
{
_InventoryFacade = new InventoryFacade(base.DataProvider);
}
WarehouseFacade facade = new WarehouseFacade(base.DataProvider);
if (_IsAdd)
{
#region 在invinouttrans表中增加一条数据
ASN asn = (ASN)domainObject;
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = string.Empty;
trans.FacCode = asn.FacCode;
trans.FromFacCode = asn.FromFacCode;
trans.FromStorageCode = asn.FromStorageCode;
trans.InvNO = asn.InvNo;
trans.InvType = asn.StType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime.DBDate;
trans.MaintainTime = dbTime.DBTime;
trans.MaintainUser = this.GetUserCode();
trans.MCode = string.Empty;
trans.ProductionDate = 0;
trans.Qty = 0;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asn.StNo;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "ASN";
facade.AddInvInOutTrans(trans);
#endregion
this._InventoryFacade.AddASN((ASN)domainObject);
}
else
{
this._InventoryFacade.UpdateASN((ASN)domainObject);
}
}
private string autoCreateASNFromCheckoutInfo(string invNo, Pick pick)
{
try
{
InvoicesDetail invD = (InvoicesDetail)_InventoryFacade.GetInvoicesDetail(invNo);
CARTONINVOICES[] cartos = _warehouseFacade.GetGrossAndWeight(pick.PickNo);
string stno = CreateStNO();
Asn asn = new Asn();
asn.Stno = stno;
asn.StType = "UB";
asn.CDate = FormatHelper.TODateInt(DateTime.Now);
asn.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asn.CUser = GetUserCode();
asn.Status = "Release";
asn.Invno = invNo;
asn.FacCode = pick.FacCode;
if (cartos.Length > 0)
{
asn.Gross_weight = (decimal)cartos[0].GROSS_WEIGHT;
asn.Volume = cartos[0].VOLUME;
}
asn.StorageCode = invD.StorageCode ?? " ";
asn.MaintainUser = GetUserCode();
asn.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asn.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
CartonInvDetailMaterial[] cartonMs = _warehouseFacade.GetCartonInvDetailMaterial(pick.PickNo);
MOModel.ItemFacade _itemfacade = new BenQGuru.eMES.MOModel.ItemFacade(this.DataProvider);
int i = 1;
this.DataProvider.BeginTransaction();
foreach (CartonInvDetailMaterial m in cartonMs)
{
object materobj = _itemfacade.GetMaterial(m.MCODE);
Domain.MOModel.Material mater = materobj as Domain.MOModel.Material;
if (materobj == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("物料表没有物料：" + m.MCODE);
}
string custMCode = _warehouseFacade.GetCustMCodeForUB(pick.PickNo, m.DQMCODE);
if (mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_KEYPARTS)
{
ASNDetail asnd = new ASNDetail();
asnd.ActQty = 0;
//asnd.CartonNo = " ";
asnd.DQMCode = m.DQMCODE;
asnd.Qty = (int)m.QTY;
asnd.StLine = i.ToString();
asnd.CustMCode = custMCode;
asnd.MCode = m.MCODE;
asnd.Status = "Release";
asnd.StNo = stno;
asnd.MDesc = mater.MchshortDesc;
asnd.Unit = m.UNIT;
asnd.CDate = FormatHelper.TODateInt(DateTime.Now);
asnd.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.CUser = GetUserCode();
asnd.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnd.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.MaintainUser = GetUserCode();
asnd.LotNo = " ";
CARTONINVDETAILSN[] sns = _warehouseFacade.GetCartonInvDetailSn(m.CARTONNO, pick.PickNo);
List <string> snList = new List <string>();
if (sns.Length > 0)
{
foreach (CARTONINVDETAILSN sn in sns)
{
snList.Add(sn.SN);
}
Asndetail detail = _warehouseFacade.GetFirstCheckInAsnDetail(snList);
if (detail != null)
{
asnd.ProductionDate = detail.Production_Date;
asnd.SupplierLotNo = detail.Supplier_lotno;
asnd.LotNo = detail.Lotno;
asnd.StorageAgeDate = detail.StorageageDate;
}
}
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
Asndetailitem detailitem = _warehouseFacade.CreateNewAsndetailitem();
detailitem.CDate = dbTime.DBDate;
detailitem.CTime = dbTime.DBTime;
detailitem.CUser = this.GetUserCode();
detailitem.MaintainDate = dbTime.DBDate;
detailitem.MaintainTime = dbTime.DBTime;
detailitem.MaintainUser = this.GetUserCode();
detailitem.Stline = i.ToString();
detailitem.Stno = asn.Stno;
detailitem.MCode = asnd.MCode;
detailitem.DqmCode = asnd.DQMCode;
//查找对应的SAP单
object[] qtyobjs = _warehouseFacade.GetSAPNOandLinebyMCODE(asn.Invno, asnd.MCode, asnd.DQMCode);
if (qtyobjs == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("入库需求" + asn.Invno + " 没有相关物料" + asnd.MCode + "," + asnd.DQMCode + "或者此行已被取消！");
}
decimal sub = asnd.Qty;
for (int k = 0; k < qtyobjs.Length; k++)
{
InvoicesDetail invdetail = qtyobjs[k] as InvoicesDetail;
decimal subNeed = 0;
object findNeedQTY_old = _warehouseFacade.GetNeedImportQtyOLD(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemOld = findNeedQTY_old as Asndetailitem;
object findNeedQTY_now = _warehouseFacade.GetNeedImportQtyNow(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemNow = findNeedQTY_now as Asndetailitem;
subNeed = invdetail.PlanQty - subItemOld.Qty + (subItemOld.Qty - subItemOld.ReceiveQty) + (subItemOld.ReceiveQty - subItemOld.QcpassQty);
subNeed = subNeed - subItemNow.Qty;
if (subNeed == 0)
{
continue;
}
//如果箱数量大于需求数量差---进行拆分
if (sub > subNeed)
{
sub = sub - subNeed; // sub是剩余的
detailitem.Qty = subNeed;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
}
//如果箱单数量小于等于需求数量差--直接填入
else
{
detailitem.Qty = sub;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
sub = 0;
}
if (sub == 0)
{
break;
}
}
//如果sub>0，说明导入数量过多，报错
if (sub > 0)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
foreach (CARTONINVDETAILSN sn in sns)
{
Asndetailsn asnSN = new Asndetailsn();
asnSN.CDate = FormatHelper.TODateInt(DateTime.Now);
asnSN.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnSN.CUser = GetUserCode();
asnSN.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnSN.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnSN.MaintainUser = GetUserCode();
asnSN.Sn = sn.SN;
asnSN.Stline = i.ToString();
asnSN.Stno = stno;
_warehouseFacade.AddAsndetailsn(asnSN);
}
_InventoryFacade.AddASNDetail(asnd);
}
else if (mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_LOT || mater.MCONTROLTYPE == SAP_CONTROLTYPE.SAP_ITEM_CONTROL_NOCONTROL)
{
ASNDetail asnd = new ASNDetail();
asnd.ActQty = 0;
asnd.CustMCode = custMCode;
asnd.DQMCode = m.DQMCODE;
asnd.Qty = (int)m.QTY;
asnd.StLine = i.ToString();
asnd.MCode = m.MCODE;
asnd.StNo = stno;
asnd.Status = "Release";
asnd.MDesc = mater.MchshortDesc;
asnd.Unit = m.UNIT;
asnd.CDate = FormatHelper.TODateInt(DateTime.Now);
asnd.CTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.CUser = GetUserCode();
asnd.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
asnd.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
asnd.MaintainUser = GetUserCode();
asnd.LotNo = " ";
Pickdetailmaterial pickMaterial = (Pickdetailmaterial)_warehouseFacade.GetLotNOInformationFromDQMCODE(m.DQMCODE, pick.PickNo);
if (pickMaterial != null)
{
asnd.ProductionDate = pickMaterial.Production_Date;
asnd.SupplierLotNo = pickMaterial.Supplier_lotno;
asnd.LotNo = pickMaterial.Lotno;
asnd.StorageAgeDate = pickMaterial.StorageageDate;
}
else
{
throw new Exception(pick.PickNo + "没有找到检料信息！");
}
_InventoryFacade.AddASNDetail(asnd);
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
Asndetailitem detailitem = _warehouseFacade.CreateNewAsndetailitem();
detailitem.CDate = dbTime.DBDate;
detailitem.CTime = dbTime.DBTime;
detailitem.CUser = this.GetUserCode();
detailitem.MaintainDate = dbTime.DBDate;
detailitem.MaintainTime = dbTime.DBTime;
detailitem.MaintainUser = this.GetUserCode();
detailitem.Stline = i.ToString();
detailitem.Stno = asn.Stno;
detailitem.MCode = asnd.MCode;
detailitem.DqmCode = asnd.DQMCode;
//查找对应的SAP单
object[] qtyobjs = _warehouseFacade.GetSAPNOandLinebyMCODE(asn.Invno, asnd.MCode, asnd.DQMCode);
if (qtyobjs == null)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
decimal sub = asnd.Qty;
for (int k = 0; k < qtyobjs.Length; k++)
{
InvoicesDetail invdetail = qtyobjs[k] as InvoicesDetail;
decimal subNeed = 0;
object findNeedQTY_old = _warehouseFacade.GetNeedImportQtyOLD(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemOld = findNeedQTY_old as Asndetailitem;
object findNeedQTY_now = _warehouseFacade.GetNeedImportQtyNow(invdetail.InvNo, invdetail.InvLine, asnd.StNo); //找这个invoice行已经导入了多少，和判退多少
Asndetailitem subItemNow = findNeedQTY_now as Asndetailitem;
subNeed = invdetail.PlanQty - subItemOld.Qty + (subItemOld.Qty - subItemOld.ReceiveQty) + (subItemOld.ReceiveQty - subItemOld.QcpassQty);
subNeed = subNeed - subItemNow.Qty;
if (subNeed == 0)
{
continue;
}
//如果箱数量大于需求数量差---进行拆分
if (sub > subNeed)
{
sub = sub - subNeed; // sub是剩余的
detailitem.Qty = subNeed;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
}
//如果箱单数量小于等于需求数量差--直接填入
else
{
detailitem.Qty = sub;
detailitem.Invline = invdetail.InvLine.ToString();
detailitem.Invno = invdetail.InvNo;
detailitem.ActQty = detailitem.Qty;
detailitem.QcpassQty = detailitem.Qty;
detailitem.ReceiveQty = detailitem.Qty;
_warehouseFacade.AddAsndetailitem(detailitem);
sub = 0;
}
if (sub == 0)
{
break;
}
}
//如果sub>0，说明导入数量过多，报错
if (sub > 0)
{
this.DataProvider.RollbackTransaction();
throw new Exception("箱单导入数量与需求数量不符!");
}
}
i++;
}
_warehouseFacade.AddAsn(asn);
WarehouseFacade facade = new WarehouseFacade(base.DataProvider);
#region 在invinouttrans表中增加一条数据
//ASN asn = (ASN)domainObject;
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = string.Empty;
trans.FacCode = asn.FacCode;
trans.FromFacCode = asn.FromfacCode;
trans.FromStorageCode = asn.FromstorageCode;
trans.InvNO = asn.Invno;
trans.InvType = asn.StType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = dbTime1.DBTime;
trans.MaintainUser = this.GetUserCode();
trans.MCode = string.Empty;
trans.ProductionDate = 0;
trans.Qty = 0;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asn.Stno;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "UBCreateASN";
facade.AddInvInOutTrans(trans);
#endregion
this.DataProvider.CommitTransaction();
return(stno);
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
throw ex;
}
}
private void ToSTS(string oqcNo)
{
if (_OQCFacade == null)
{
_OQCFacade = new OQCFacade(base.DataProvider);
}
_InventoryFacade = new InventoryFacade(base.DataProvider);
WarehouseFacade _WarehouseFacade = new WarehouseFacade(base.DataProvider);
//1、更新OQC单表(TBLOQC)
_OQCFacade.UpdateOQC(OQCType.OQCType_ExemptCheck, OQCStatus.OQCStatus_OQCClose, "Y", oqcNo);
//2、更新OQC单明细表(TBLOQCDETAIL)
_OQCFacade.UpdateOQCDetail("Y", oqcNo);
//3、更新OQC单明细SN信息表(TBLOQCDETAILSN)
_OQCFacade.UpdateOQCDetailSN("Y", oqcNo);
//4、更新发货箱单头信息表(TBLCartonInvoices)
Pick pick = (Pick)_InventoryFacade.GetPickByOqcNo(oqcNo);
if (pick != null)
{
//if (pick.GFFlag == "X")
//{
// if (CheckAllOQCStatusIsOQCClose(oqcNo))
// {
// CARTONINVOICES cartonInvoices = (CARTONINVOICES)_WarehouseFacade.GetCartoninvoicesByOqcNo(oqcNo);
// if (cartonInvoices != null)
// {
// cartonInvoices.STATUS = CartonInvoices_STATUS.Status_OQCClose;
// _WarehouseFacade.UpdateCartoninvoices(cartonInvoices);
// }
// }
// else
// {
// throw new Exception("OQC单号" + oqcNo + "没有全部检验完成");
// }
//}
//else
//{
if (_OQCFacade.IsOQCFinish(pick.PickNo))
{
pick.Status = PickHeadStatus.PickHeadStatus_PackingListing;
_WarehouseFacade.UpdatePick(pick);
}
CARTONINVOICES cartonInvoices = (CARTONINVOICES)_WarehouseFacade.GetCartoninvoicesByOqcNo(oqcNo);
if (cartonInvoices != null)
{
cartonInvoices.STATUS = CartonInvoices_STATUS.Status_OQCClose;
_WarehouseFacade.UpdateCartoninvoices(cartonInvoices);
}
//}
#region 在invinouttrans表中增加一条数据
WarehouseFacade facade = new WarehouseFacade(base.DataProvider);
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans1 = facade.CreateNewInvInOutTrans();
trans1.CartonNO = string.Empty;
trans1.DqMCode = string.Empty;
trans1.FacCode = string.Empty;
trans1.FromFacCode = string.Empty;
trans1.FromStorageCode = string.Empty;
trans1.InvNO = pick.InvNo;//.InvNo;
trans1.InvType = pick.PickType;
trans1.LotNo = string.Empty;
trans1.MaintainDate = dbTime1.DBDate;
trans1.MaintainTime = dbTime1.DBTime;
trans1.MaintainUser = this.GetUserCode();
trans1.MCode = string.Empty;
trans1.ProductionDate = 0;
trans1.Qty = 0;
trans1.Serial = 0;
trans1.StorageAgeDate = 0;
trans1.StorageCode = string.Empty;
trans1.SupplierLotNo = string.Empty;
trans1.TransNO = pick.PickNo;// asnIqc.IqcNo;
trans1.TransType = "OUT";
trans1.Unit = string.Empty;
trans1.ProcessType = "OQC";
facade.AddInvInOutTrans(trans1);
Domain.OQC.OQC asnIqcHead = (Domain.OQC.OQC)_OQCFacade.GetOQC(oqcNo);
object[] objs_oqcDetail = _OQCFacade.GetOQCDetailByOqcNo(oqcNo);
if (objs_oqcDetail != null)
{
foreach (OQCDetail asnIqc in objs_oqcDetail)
{
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = asnIqc.DQMCode;
trans.FacCode = string.Empty;
trans.FromFacCode = string.Empty;
trans.FromStorageCode = string.Empty;
trans.InvNO = asnIqc.CarInvNo;//.InvNo;
trans.InvType = asnIqcHead.OqcType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = dbTime1.DBTime;
trans.MaintainUser = this.GetUserCode();
trans.MCode = asnIqc.MCode;
trans.ProductionDate = 0;
trans.Qty = asnIqc.Qty;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = string.Empty;
trans.SupplierLotNo = string.Empty;
trans.TransNO = oqcNo;// asnIqc.IqcNo;
trans.TransType = "OUT";
trans.Unit = string.Empty;
trans.ProcessType = "OQC";
facade.AddInvInOutTrans(trans);
}
}
#endregion
}
}
public string OnShelves(DataTable dt, string cartonNO, string UserCode)
{
WarehouseFacade facade = null;
InventoryFacade _Invenfacade = null;
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(DataProvider);
object obj = null;
if (facade == null)
{
facade = new WarehouseFacade(DataProvider);
}
if (_Invenfacade == null)
{
_Invenfacade = new InventoryFacade(DataProvider);
}
this.DataProvider.BeginTransaction();
try
{
string Stno = string.Empty;
for (int j = 0; j < dt.Rows.Count; j++)
{
obj = facade.GetAsndetail(int.Parse(dt.Rows[j]["stline"].ToString()), dt.Rows[j]["stno"].ToString());
if (obj != null)
{
Stno = (obj as Asndetail).Stno;
#region 更新asndetail表 更新actqty和状态
//update actqty and status
Asndetail asndetail = obj as Asndetail;
asndetail.ActQty = asndetail.QcpassQty;
asndetail.Status = ASNDetail_STATUS.ASNDetail_Close;
asndetail.MaintainDate = dbTime.DBDate;
asndetail.MaintainTime = dbTime.DBTime;
asndetail.MaintainUser = UserCode;
facade.UpdateAsndetail(asndetail);
#endregion
#region 更新asndetailitem表 更新 actqty 和更新invoicedetail表，更新actqty
object[] itemobjs = facade.GetASNDetailItembyStnoAndStline(asndetail.Stno, asndetail.Stline.ToString());
if (itemobjs != null)
{
for (int i = 0; i < itemobjs.Length; i++)
{
Asndetailitem asnitem = itemobjs[i] as Asndetailitem;
asnitem.ActQty = asnitem.QcpassQty;
asnitem.MaintainDate = dbTime.DBDate;
asnitem.MaintainTime = dbTime.DBTime;
asnitem.MaintainUser = UserCode;
facade.UpdateAsndetailitem(asnitem);
object invoiobj = _Invenfacade.GetInvoicesDetail(asnitem.Invno, int.Parse(asnitem.Invline));
InvoicesDetail inv = invoiobj as InvoicesDetail;
inv.ActQty += Convert.ToInt32(asnitem.QcpassQty);
inv.MaintainDate = dbTime.DBDate;
inv.MaintainTime = dbTime.DBTime;
inv.MaintainUser = UserCode;
_Invenfacade.UpdateInvoicesDetail(inv);
}
}
#endregion
//新增数据tblstoragedetail
object asnobj = facade.GetAsn(asndetail.Stno);
if (asnobj == null)
{
this.DataProvider.RollbackTransaction();
// WebInfoPublish.Publish(this, "$Error_ASN_NO_DATA", this.languageComponent1);
return("ASN 中没有数据:" + asndetail.Stno);
}
Asn asn = asnobj as Asn;
#region 在storagedetail表中增加一条数据
StorageDetail stordetail = _Invenfacade.CreateNewStorageDetail();
stordetail.AvailableQty = asndetail.ActQty;
stordetail.CartonNo = asndetail.Cartonno;
stordetail.CDate = dbTime.DBDate;
stordetail.CTime = dbTime.DBTime;
stordetail.CUser = UserCode;
stordetail.DQMCode = asndetail.DqmCode;
stordetail.FacCode = (asnobj as Asn).FacCode;
stordetail.FreezeQty = 0;
stordetail.LastStorageAgeDate = dbTime.DBDate;
stordetail.LocationCode = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(cartonNO));
stordetail.Lotno = asndetail.Lotno;
stordetail.MaintainDate = dbTime.DBDate;
stordetail.MaintainTime = dbTime.DBTime;
stordetail.MaintainUser = UserCode;
stordetail.MCode = asndetail.MCode;
stordetail.MDesc = asndetail.MDesc;
stordetail.ProductionDate = asndetail.Production_Date;
stordetail.ReworkApplyUser = (asnobj as Asn).ReworkapplyUser;
stordetail.StorageAgeDate = string.IsNullOrEmpty(asndetail.StorageageDate.ToString()) ? dbTime.DBDate : int.Parse(asndetail.StorageageDate);
stordetail.StorageCode = (asnobj as Asn).StorageCode;
stordetail.StorageQty = asndetail.ActQty;
stordetail.SupplierLotNo = asndetail.Supplier_lotno;
stordetail.Unit = asndetail.Unit;
_Invenfacade.AddStorageDetail(stordetail);
#endregion
#region 在StorageDetailSN表中增加数据
//新增数据tblStorageDetailSN
object[] snobj = facade.GetASNDetailSNbyStnoandStline(asndetail.Stno, asndetail.Stline.ToString());
if (snobj == null)
{
this.DataProvider.RollbackTransaction();
// WebInfoPublish.Publish(this, "$Error_ASNDetail_NO_DATA", this.languageComponent1);
return("ASNDetail表中没有数据:" + asndetail.Stno + "/" + asndetail.Stline.ToString());
}
for (int i = 0; i < snobj.Length; i++)
{
StorageDetailSN storDetailSN = _Invenfacade.CreateNewStorageDetailSN();
Asndetailsn detailSN = snobj[i] as Asndetailsn;
storDetailSN.CartonNo = detailSN.Cartonno;
storDetailSN.CDate = dbTime.DBDate;
storDetailSN.CTime = dbTime.DBTime;
storDetailSN.CUser = UserCode;
storDetailSN.MaintainDate = dbTime.DBDate;
storDetailSN.MaintainTime = dbTime.DBTime;
storDetailSN.MaintainUser = UserCode;
storDetailSN.PickBlock = "N";
storDetailSN.SN = detailSN.Sn;
_Invenfacade.AddStorageDetailSN(storDetailSN);
}
#endregion
#region 在invinouttrans表中增加一条数据
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = asndetail.Cartonno;
trans.DqMCode = asndetail.DqmCode;
trans.FacCode = asn.FacCode;
trans.FromFacCode = asn.FromfacCode;
trans.FromStorageCode = asn.FromstorageCode;
trans.InvNO = asn.Invno;
trans.InvType = asn.StType;
trans.LotNo = asndetail.Lotno;
trans.MaintainDate = dbTime.DBDate;
trans.MaintainTime = dbTime.DBTime;
trans.MaintainUser = UserCode;
trans.MCode = asndetail.MCode;
trans.ProductionDate = asndetail.Production_Date;
trans.Qty = asndetail.ActQty;
trans.Serial = 0;
trans.StorageAgeDate = int.Parse(asndetail.StorageageDate);
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = asndetail.Supplier_lotno;
trans.TransNO = asn.Stno;
trans.TransType = "IN";
trans.Unit = asndetail.Unit;
facade.AddInvInOutTrans(trans);
#endregion
}
}
#region 架完成后，检查这个stno在asndetail中的状态是否都是close，cancel，如果是将asn表的状态更新为close，cancel
if (facade.JudgeASNDetailStatus(Stno, ASNDetail_STATUS.ASNDetail_Close))
{
object asnobj = facade.GetAsn(Stno);
if (asnobj == null)
{
this.DataProvider.RollbackTransaction();
//WebInfoPublish.Publish(this, "$Error_ASN_NO_DATA", this.languageComponent1);
return("ASN 中没有数据:" + Stno);
}
Asn asn = asnobj as Asn;
asn.Status = ASN_STATUS.ASN_Close;
asn.MaintainDate = dbTime.DBDate;
asn.MaintainTime = dbTime.DBTime;
asn.MaintainUser = UserCode;
facade.UpdateAsn(asn);
}
if (facade.JudgeASNDetailStatus(Stno, ASNDetail_STATUS.ASNDetail_Cancel))
{
object asnobj = facade.GetAsn(Stno);
if (asnobj == null)
{
this.DataProvider.RollbackTransaction();
//WebInfoPublish.Publish(this, "$Error_ASN_NO_DATA", this.languageComponent1);
return("ASN中没有数据:" + Stno);
}
Asn asn = asnobj as Asn;
asn.Status = ASN_STATUS.ASN_Cancel;
asn.MaintainDate = dbTime.DBDate;
asn.MaintainTime = dbTime.DBTime;
asn.MaintainUser = UserCode;
facade.UpdateAsn(asn);
}
#endregion
#region 通过入库指令号，查找invno，检查actqty是否等于planqty，如果等于将finishflag=Y
object asnobj1 = facade.GetAsn(Stno);
if (asnobj1 == null)
{
this.DataProvider.RollbackTransaction();
//WebInfoPublish.Publish(this, "$Error_ASN_NO_DATA", this.languageComponent1);
return("ASN中没有数据:" + Stno);
}
Asn asn1 = asnobj1 as Asn;
if (facade.JudgeInvoiceDetailStatus(asn1.Invno))
{
object invobj = _Invenfacade.GetInvoices(asn1.Invno);
if (invobj == null)
{
this.DataProvider.RollbackTransaction();
//WebInfoPublish.Publish(this, "$Error_INV_NO_DATA", this.languageComponent1);
return("INV中没有数据:" + asn1.Invno);
}
Invoices inv = invobj as Invoices;
inv.FinishFlag = "Y";
inv.MaintainDate = dbTime.DBDate;
inv.MaintainTime = dbTime.DBTime;
inv.MaintainUser = UserCode;
_Invenfacade.UpdateInvoices(inv);
}
#endregion
this.DataProvider.CommitTransaction();
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
}
return("上架成功");
}
private void ToSTS(string iqcNo, string userCode)
{
IQCFacade _IQCFacade = new IQCFacade(DataProvider);
InventoryFacade _InventoryFacade = new InventoryFacade(DataProvider);
//1、更新送检单TBLASNIQC
AsnIQC asnIqc = (AsnIQC)_IQCFacade.GetAsnIQC(iqcNo);
if (asnIqc != null)
{
asnIqc.IqcType = "ExemptCheck";
asnIqc.Status = IQCStatus.IQCStatus_IQCClose;
asnIqc.QcStatus = "Y";
_IQCFacade.UpdateAsnIQC(asnIqc);
#region 在invinouttrans表中增加一条数据
WarehouseFacade facade = new WarehouseFacade(DataProvider);
//ASN asn = (ASN)domainObject;
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans = facade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = asnIqc.DQMCode;
trans.FacCode = string.Empty;
trans.FromFacCode = string.Empty;
trans.FromStorageCode = string.Empty;
trans.InvNO = asnIqc.InvNo;
trans.InvType = asnIqc.IqcType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = dbTime1.DBTime;
trans.MaintainUser = userCode;
trans.MCode = asnIqc.MCode;
trans.ProductionDate = 0;
trans.Qty = asnIqc.Qty;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = string.Empty;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asnIqc.IqcNo;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "IQC";
facade.AddInvInOutTrans(trans);
#endregion
}
object[] objAsnIqcDetail = _IQCFacade.GetAsnIQCDetailByIqcNo(iqcNo);
if (objAsnIqcDetail != null)
{
foreach (AsnIQCDetail asnIqcDetail in objAsnIqcDetail)
{
//2、更新送检单明细TBLASNIQCDETAIL
asnIqcDetail.QcPassQty = asnIqcDetail.Qty;
asnIqcDetail.QcStatus = "Y";
_IQCFacade.UpdateAsnIQCDetail(asnIqcDetail);
//4、更新ASN明细TBLASNDETAIL
ASNDetail asnDetail = (ASNDetail)_InventoryFacade.GetASNDetail(Convert.ToInt32(asnIqcDetail.StLine), asnIqcDetail.StNo);
if (asnDetail != null)
{
asnDetail.QcPassQty = asnDetail.ReceiveQty;
asnDetail.Status = IQCStatus.IQCStatus_IQCClose;
_InventoryFacade.UpdateASNDetail(asnDetail);
}
//5、更新ASN明细对应单据行明细TBLASNDETAILITEM
object[] objAsnDetaileItem = _InventoryFacade.GetAsnDetailItem(asnIqcDetail.StNo, Convert.ToInt32(asnIqcDetail.StLine));
if (objAsnDetaileItem != null)
{
foreach (Asndetailitem asnDetaileItem in objAsnDetaileItem)
{
asnDetaileItem.QcpassQty = asnDetaileItem.ReceiveQty;
_InventoryFacade.UpdateAsndetailitem(asnDetaileItem);
}
}
}
}
object[] objAsnIqcDetailSN = _IQCFacade.GetAsnIqcDetailSNByIqcNo(iqcNo);
if (objAsnIqcDetailSN != null)
{
foreach (AsnIqcDetailSN asnIqcDetailSN in objAsnIqcDetailSN)
{
//3、更新送检单明细SNTBLASNIQCDETAILSN
asnIqcDetailSN.QcStatus = "Y";
_IQCFacade.UpdateAsnIqcDetailSN(asnIqcDetailSN);
//6、更新ASN明细SN TBLASNDETAILSN
Asndetailsn asnDetailSn = (Asndetailsn)_InventoryFacade.GetAsndetailsn(asnIqcDetailSN.Sn, asnIqcDetailSN.StNo, Convert.ToInt32(asnIqcDetailSN.StLine));
if (asnDetailSn != null)
{
asnDetailSn.QcStatus = "Y";
_InventoryFacade.UpdateAsndetailsn(asnDetailSn);
}
}
}
//7、以上表数据更新完成后检查ASN明细表(TBLASNDETAIL)所有行记录状态为：IQCClose:IQC完成 or OnLocation:上架 or Close:入库 or Cancel:取消时，
// 更新ASN主表(TBLASN)状态(TBLASN.STATUS)为：OnLocation:上架
bool isAllIQCClose = CheckAllASNDetailIsIQCClose(iqcNo);
bool isAllOnLocation = CheckAllASNDetailIsOnLocation(iqcNo);
bool isAllClose = CheckAllASNDetailIsClose(iqcNo);
bool isAllCancel = CheckAllASNDetailIsCancel(iqcNo);
if (isAllIQCClose || isAllOnLocation ||
isAllClose || isAllCancel
)
{
ASN asn = (ASN)_InventoryFacade.GetASN(asnIqc.StNo);
if (asn != null)
{
asn.Status = ASNHeadStatus.OnLocation;
_InventoryFacade.UpdateASN(asn);
}
}
}
public bool FirstCheckWithUser(string[] asns, string userCode, out string message)
{
try
{
WarehouseFacade facade = new WarehouseFacade(DataProvider);
InventoryFacade facade1 = new InventoryFacade(DataProvider);
message = string.Empty;
Asn asn = (Asn)facade.GetAsn(asns[0]);
if (asn.Direct_flag.ToUpper() == "Y")
{
message = "该入库指令是供应商直发，不能做以下操作[取消下发][初检][申请IQC]";
return(false);
}
if (asn.Status == ASNHeadStatus.WaitReceive)
{
this.DataProvider.BeginTransaction();
string stNo = string.Format("'{0}'", asn.Stno);
facade1.UpdateASNStatusByStNo(ASNHeadStatus.Receive, stNo);
facade1.UpdateASNDetailStatusByStNo(ASNHeadStatus.Receive, stNo);
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
WarehouseFacade _wa = new WarehouseFacade(DataProvider);
InvInOutTrans trans = _wa.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = " ";
trans.FacCode = asn.FacCode;
trans.FromFacCode = string.Empty;
trans.FromStorageCode = string.Empty;
trans.InvNO = asn.Invno;
trans.InvType = asn.StType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
trans.MaintainUser = userCode;
trans.MCode = " ";
trans.ProductionDate = 0;
trans.Qty = 0;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asn.Stno;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "RECEIVEBEGIN";
_wa.AddInvInOutTrans(trans);
this.DataProvider.CommitTransaction();
message = "初检成功";
return(true);
}
else if (asn.Status == ASNHeadStatus.Receive)
{
message = "初检成功";
return(true);
}
else
{
message = "状态必须是初见签收中或者待收货！";
return(false);
}
}
catch (Exception ex)
{
DataProvider.RollbackTransaction();
BenQGuru.eMES.Common.Log.Error(ex.StackTrace);
throw ex;
}
}
protected void CmdConfirmOweQtyObjects(object[] pickList)
{
// 点击该按钮，初始TBLPICKDETAIL. OweQTY为空or零，
//点击该按钮后保存TBLPICKDETAIL. OweQTY= TBLPICKDETAIL. SQTY
//注：只有状态为：Owe:欠料的物料行可以执行此按钮，确认后该行更新状态为ClosePick:拣料完成
if (facade == null)
{
facade = new InventoryFacade(base.DataProvider);
}
if (_WarehouseFacade == null)
{
_WarehouseFacade = new WarehouseFacade(base.DataProvider);
}
DBDateTime dbTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
try
{
this.DataProvider.BeginTransaction();
foreach (PickDetail pickdetail in pickList)
{
if (pickdetail.Status == PickDetail_STATUS.Status_Owe)
{
if (pickdetail.OweQTY == 0 || string.IsNullOrEmpty(pickdetail.OweQTY.ToString()))
{
PickDetail oldpickdetail = (PickDetail)facade.GetPickDetail(pickdetail.PickNo, pickdetail.PickLine);
oldpickdetail.OweQTY = oldpickdetail.SQTY;
oldpickdetail.Status = PickDetail_STATUS.Status_ClosePick;
facade.UpdatePickDetail(oldpickdetail);
}
else
{
WebInfoPublish.Publish(this, "已申请欠料发货！", this.languageComponent1);
return;
}
}
else
{
WebInfoPublish.Publish(this, "只有状态为欠料的物料行可以执行此按钮", this.languageComponent1);
return;
}
}
#region 在invinouttrans表中增加一条数据 箱单完成日期
WarehouseFacade wfacade = new WarehouseFacade(base.DataProvider);
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
foreach (PickDetail pickDetail in pickList)
{
Pick pick = facade.GetPick(pickDetail.PickNo) as Pick;
InvInOutTrans trans = wfacade.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = pickDetail.DQMCode;
trans.FacCode = string.Empty;
trans.FromFacCode = string.Empty;
trans.FromStorageCode = string.Empty;
trans.InvNO = pick.InvNo;//.InvNo;
trans.InvType = pick.PickType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = dbTime1.DBTime;
trans.MaintainUser = this.GetUserCode();
trans.MCode = pickDetail.MCode;
trans.ProductionDate = 0;
trans.Qty = pickDetail.QTY;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = string.Empty;
trans.SupplierLotNo = string.Empty;
trans.TransNO = pickDetail.PickNo;
trans.TransType = "OUT";
trans.Unit = string.Empty;
trans.ProcessType = "ClosePick";
wfacade.AddInvInOutTrans(trans);
}
#endregion
string pickno = FormatHelper.CleanString(this.txtPickNoQuery.Text);
bool isUpdatePick = facade.QueryPickDetailCount(pickno, PickDetail_STATUS.Status_ClosePick) == 0;
if (isUpdatePick)
{
facade.UpdatePickStatusByPickno(pickno, PickHeadStatus.PickHeadStatus_MakePackingList);
}
#region 创建发货箱单
string carInvNo = string.Empty;
object obj = _WarehouseFacade.GetCartonInvoices(pickno);
if (obj == null)
{
CARTONINVOICES CartonH = _WarehouseFacade.CreateNewCartoninvoices();
object objLot = _WarehouseFacade.GetNewLotNO("K", dbTime.DBDate.ToString().Substring(2, 6).ToString());
Serialbook serbook = _WarehouseFacade.CreateNewSerialbook();
if (objLot == null)
{
#region
CartonH.CARINVNO = "K" + dbTime.DBDate.ToString().Substring(2, 6).ToString() + "001";
CartonH.PICKNO = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtPickNoQuery.Text));
CartonH.STATUS = CartonInvoices_STATUS.Status_Release;
CartonH.CDATE = dbTime.DBDate;
CartonH.CTIME = dbTime.DBTime;
CartonH.CUSER = this.GetUserCode();
CartonH.MDATE = dbTime.DBDate;
CartonH.MTIME = dbTime.DBTime;
CartonH.MUSER = this.GetUserCode();
_WarehouseFacade.AddCartoninvoices(CartonH);
serbook.SNprefix = "K" + dbTime.DBDate.ToString().Substring(2, 6).ToString();
serbook.MAXSerial = "2";
serbook.MUser = this.GetUserCode();
serbook.MDate = dbTime.DBDate;
serbook.MTime = dbTime.DBTime;
_WarehouseFacade.AddSerialbook(serbook);
#endregion
}
else
{
#region
string MAXNO = (objLot as Serialbook).MAXSerial;
string SNNO = (objLot as Serialbook).SNprefix;
CartonH.CARINVNO = SNNO + Convert.ToString(MAXNO).PadLeft(3, '0');
CartonH.PICKNO = FormatHelper.PKCapitalFormat(FormatHelper.CleanString(this.txtPickNoQuery.Text));
CartonH.STATUS = CartonInvoices_STATUS.Status_Release;
CartonH.CDATE = dbTime.DBDate;
CartonH.CTIME = dbTime.DBTime;
CartonH.CUSER = this.GetUserCode();
CartonH.MDATE = dbTime.DBDate;
CartonH.MTIME = dbTime.DBTime;
CartonH.MUSER = this.GetUserCode();
_WarehouseFacade.AddCartoninvoices(CartonH);
//更新tblserialbook
serbook.SNprefix = SNNO;
serbook.MAXSerial = Convert.ToString((int.Parse(MAXNO) + 1));
serbook.MUser = this.GetUserCode();
serbook.MDate = dbTime.DBDate;
serbook.MTime = dbTime.DBTime;
_WarehouseFacade.UpdateSerialbook(serbook);
#endregion
}
}
# endregion
this.DataProvider.CommitTransaction();
WebInfoPublish.Publish(this, "确认欠料发货数量成功", this.languageComponent1);
}
public string Commit_Click(string userCode, string statusList, string transNo, string tLocationCode, string fromCarton, string tcarton, string inputsn, string inputqty)
{
string msg;
#region facade
InventoryFacade facade = new InventoryFacade(this.DataProvider);
if (_WarehouseFacade == null)
{
_WarehouseFacade = new WarehouseFacade(this.DataProvider);
}
ItemFacade itemFacade = new ItemFacade();
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
#endregion
#region check
if (string.IsNullOrEmpty(transNo))
{
msg = "移转单号不能为空";
return(msg);
}
StorageDetail storageCarton = (StorageDetail)facade.GetStorageDetail(fromCarton);
if (storageCarton == null)
{ //A 根据原箱号和数量操作。根据原箱号（cartonno）到TBLStorageDetail中查找数据。没有报错。
msg = "转储单中没有对应的原箱号";
return(msg);
}
if (string.IsNullOrEmpty(tLocationCode))
{
msg = "目标货位不能为空";
return(msg);
}
if (string.IsNullOrEmpty(tcarton))
{
msg = "目标箱号不能为空";
return(msg);
}
Storloctrans storloctrans = (Storloctrans)_WarehouseFacade.GetStorloctrans(transNo);
if (storloctrans == null)
{
msg = "移转单号不存在";
return(msg);
}
#endregion
string msgsn = "";
StorageDetail fromStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(fromCarton);
StorageDetail toStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(tcarton);
if (fromStorageDetail == null)
{
return("原箱号在库存中不存在！");
}
StorloctransDetail storloctransdetailObj = (StorloctransDetail)_WarehouseFacade.GetStorloctransdetail(transNo, fromStorageDetail.MCode);
if (storloctransdetailObj == null)
{
return("转储单中没有对应的物料号");
}
Location tLocation = (Location)facade.GetLocation(tLocationCode, 1);
if (fromStorageDetail.StorageCode != tLocation.StorageCode)
{
return("原货位的库位必须与目标货位的库位一致！");
}
if (toStorageDetail != null && toStorageDetail.StorageCode != fromStorageDetail.StorageCode)
{
return("目标箱号的库位必须原箱号的库位一样！");
}
if (tcarton != fromCarton && toStorageDetail != null && toStorageDetail.LocationCode != tLocation.LocationCode)
{
return("目标箱号的货位必须与填写的目标货位一致！");
}
if (toStorageDetail != null && toStorageDetail.DQMCode != fromStorageDetail.DQMCode)
{
return("目标箱号的物料必须与原箱号的物料一致！");
}
if ((statusList == CartonType.CartonType_SplitCarton) && (tcarton == fromCarton))
{
return("拆箱必须原箱号和目标箱号不同！");
}
try
{
this.DataProvider.BeginTransaction();
InvInOutTrans trans = _WarehouseFacade.CreateNewInvInOutTrans();
trans.CartonNO = tcarton;
trans.DqMCode = fromStorageDetail.DQMCode;
trans.FacCode = fromStorageDetail.FacCode;
trans.FromFacCode = fromStorageDetail.FacCode;
trans.FromStorageCode = fromStorageDetail.StorageCode;
trans.InvNO = " ";
trans.InvType = " ";
trans.LotNo = " ";
trans.MaintainDate = dbDateTime.DBDate;
trans.MaintainTime = dbDateTime.DBTime;
trans.MaintainUser = userCode;
trans.MCode = fromStorageDetail.MCode;
trans.ProductionDate = fromStorageDetail.ProductionDate;
trans.Qty = fromStorageDetail.StorageQty;
trans.Serial = 0;
trans.StorageAgeDate = fromStorageDetail.StorageAgeDate;
trans.StorageCode = fromStorageDetail.StorageCode;
trans.SupplierLotNo = fromStorageDetail.SupplierLotNo;
trans.TransNO = transNo;
trans.TransType = "IN";
trans.ProcessType = "LocationTrans";
trans.Unit = fromStorageDetail.Unit;
_WarehouseFacade.AddInvInOutTrans(trans);
#region【整箱】：
if (statusList == CartonType.CartonType_AllCarton)
{
msgsn = "箱号:" + fromCarton;
if (fromStorageDetail.FreezeQty > 0)
{
return("此箱号以被占用不能移动");
}
if (_WarehouseFacade.GetStorageDetailSNPickBlockCount(fromCarton) > 0)
{
return("此箱号SN已被被占用不能移动");
}
if (_WarehouseFacade.GetStorloctransdetailcarton(transNo, fromCarton,
tcarton) != null)
{
return(transNo + "此单下已存在" + fromCarton + "移动到" + tcarton + "，请另行创建单据！");
}
facade.DeleteStorageDetail(fromStorageDetail);
toStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(tcarton);
if (toStorageDetail == null)
{
toStorageDetail = new StorageDetail();
toStorageDetail.AvailableQty = 0;
toStorageDetail.CartonNo = tcarton;
toStorageDetail.CDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.CTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.CUser = userCode;
toStorageDetail.DQMCode = fromStorageDetail.DQMCode;
toStorageDetail.FacCode = fromStorageDetail.FacCode;
toStorageDetail.FreezeQty = 0;
toStorageDetail.LastStorageAgeDate = fromStorageDetail.LastStorageAgeDate;
toStorageDetail.LocationCode = tLocationCode;
toStorageDetail.Lotno = fromStorageDetail.Lotno;
toStorageDetail.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.MaintainUser = userCode;
toStorageDetail.MCode = fromStorageDetail.MCode;
toStorageDetail.MDesc = fromStorageDetail.MDesc;
toStorageDetail.ProductionDate = fromStorageDetail.ProductionDate;
toStorageDetail.ReworkApplyUser = fromStorageDetail.ReworkApplyUser;
toStorageDetail.StorageAgeDate = fromStorageDetail.StorageAgeDate;
toStorageDetail.StorageCode = fromStorageDetail.StorageCode;
toStorageDetail.StorageQty = 0;
toStorageDetail.SupplierLotNo = fromStorageDetail.SupplierLotNo;
toStorageDetail.Unit = fromStorageDetail.Unit;
toStorageDetail.ValidStartDate = fromStorageDetail.ValidStartDate;
facade.AddStorageDetail(toStorageDetail);
}
toStorageDetail.StorageQty += fromStorageDetail.StorageQty;
toStorageDetail.AvailableQty += fromStorageDetail.AvailableQty;
facade.UpdateStorageDetail(toStorageDetail);
StorloctransDetail storloctransDetail = (StorloctransDetail)_WarehouseFacade.GetStorloctransdetail(transNo, fromStorageDetail.MCode);
storloctransDetail.Qty += fromStorageDetail.AvailableQty;
_WarehouseFacade.UpdateStorloctransdetail(storloctransDetail);
#region 4， 向TBLStorLocTransDetailCarton插入一笔数据。
StorloctransDetailCarton newstorlocDetailCarton = new StorloctransDetailCarton();
newstorlocDetailCarton.Transno = transNo; //storlocDetailCarton.Transno = StorLocTransDetail.TransNo;
newstorlocDetailCarton.MCode = fromStorageDetail.MCode; //MCODE：TBLStorLocTransDetail.MCODE
newstorlocDetailCarton.DqmCode = fromStorageDetail.DQMCode;
newstorlocDetailCarton.FacCode = "10Y2";
newstorlocDetailCarton.Qty = fromStorageDetail.StorageQty; //QTY: TBLStorageDetail. storageQTY
newstorlocDetailCarton.LocationCode = tLocationCode; //LocationCode: TBLLOCATION.LOCATIONCODE(根据PDA页面的目标货位找)
newstorlocDetailCarton.Cartonno = tcarton; //CARTONNO：PDA页面的目标箱号 txtTLocationCartonEdit
newstorlocDetailCarton.FromlocationCode = fromStorageDetail.LocationCode; //FromLocationCode：TBLStorageDetail.LocationCode
newstorlocDetailCarton.Fromcartonno = fromStorageDetail.CartonNo; //FromCARTONNO：TBLStorageDetail. CARTONNO
newstorlocDetailCarton.Lotno = fromStorageDetail.Lotno; //LotNo：TBLStorageDetail. LotNo
newstorlocDetailCarton.CUser = userCode; // CUSER
newstorlocDetailCarton.CDate = dbDateTime.DBDate; // CDATE
newstorlocDetailCarton.CTime = dbDateTime.DBTime; // CTIME
newstorlocDetailCarton.MaintainDate = dbDateTime.DBDate; // MDATE
newstorlocDetailCarton.MaintainTime = dbDateTime.DBTime; // MTIME
newstorlocDetailCarton.MaintainUser = userCode;
_WarehouseFacade.AddStorloctransdetailcarton(newstorlocDetailCarton);
#endregion
//5， 如果原箱号在TBLStorageDetailSN有SN信息，将SN信息插入到TBLStorLocTransDetailSN表
object[] storageDetailSnlist = facade.GetStorageDetailSnbyCarton(fromCarton);
if (storageDetailSnlist != null)
{
foreach (StorageDetailSN newStorageDetailSn in storageDetailSnlist)
{
#region add TBLStorageDetailSN
StorloctransDetailSN newStorloctransDetailSn = new StorloctransDetailSN();
newStorloctransDetailSn.Sn = newStorageDetailSn.SN; //SN：TBLStorageDetailSN.SN
newStorloctransDetailSn.Transno = transNo; // TBLStorLocTransDetail. TransNo
newStorloctransDetailSn.Fromcartonno = fromCarton; //FromCARTONNO：TBLStorageDetail.LocationCode
newStorloctransDetailSn.Cartonno = tcarton; //FormatHelper.CleanString(txtTLocationCodeEdit.Text);//CARTONNO：TBLLOCATION.LOCATIONCODE(根据PDA页面的目标货位找)
newStorloctransDetailSn.MaintainDate = dbDateTime.DBDate; // MDATE
newStorloctransDetailSn.MaintainTime = dbDateTime.DBTime; // MTIME
newStorloctransDetailSn.MaintainUser = userCode;
_WarehouseFacade.AddStorloctransdetailsn(newStorloctransDetailSn);
newStorageDetailSn.CartonNo = tcarton;
newStorageDetailSn.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
newStorageDetailSn.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
newStorageDetailSn.MaintainUser = userCode;
facade.UpdateStorageDetailSN(newStorageDetailSn);
#endregion
}
}
}
#endregion
#region【拆箱】：
else if (statusList == CartonType.CartonType_SplitCarton)
{
Domain.MOModel.Material material = (Domain.MOModel.Material)itemFacade.GetMaterial(storageCarton.MCode);
if (material != null)
{
//2单件管控IsInt
if (material.MCONTROLTYPE == BOMItemControlType.ITEM_CONTROL_KEYPARTS)
{
#region 单件管控：
msgsn = "SN:" + inputsn;
if (string.IsNullOrEmpty(inputsn))
{
msg = "此箱为单件管控，请输入SN。";
return(msg);
}
StorageDetailSN storageDetailSn = (StorageDetailSN)facade.GetStorageDetailSN(inputsn);
if (storageDetailSn == null)
{
return("此SN不存在！");
}
if (storageDetailSn.CartonNo != fromCarton)
{
return("原箱中不存在此SN！");
}
decimal storageQTY = fromStorageDetail.StorageQty - fromStorageDetail.FreezeQty;
if (storageQTY <= 0)
{
return("原箱号的库存数量不足:" + storageQTY);
}
if (toStorageDetail == null)
{
toStorageDetail = new StorageDetail();
toStorageDetail.AvailableQty = 0;
toStorageDetail.CartonNo = tcarton;
toStorageDetail.CDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.CTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.CUser = userCode;
toStorageDetail.DQMCode = fromStorageDetail.DQMCode;
toStorageDetail.FacCode = fromStorageDetail.FacCode;
toStorageDetail.FreezeQty = 0;
toStorageDetail.LastStorageAgeDate = fromStorageDetail.LastStorageAgeDate;
toStorageDetail.LocationCode = tLocationCode;
toStorageDetail.Lotno = fromStorageDetail.Lotno;
toStorageDetail.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.MaintainUser = userCode;
toStorageDetail.MCode = fromStorageDetail.MCode;
toStorageDetail.MDesc = fromStorageDetail.MDesc;
toStorageDetail.ProductionDate = fromStorageDetail.ProductionDate;
toStorageDetail.ReworkApplyUser = fromStorageDetail.ReworkApplyUser;
toStorageDetail.StorageAgeDate = fromStorageDetail.StorageAgeDate;
toStorageDetail.StorageCode = fromStorageDetail.StorageCode;
toStorageDetail.StorageQty = 0;
toStorageDetail.SupplierLotNo = fromStorageDetail.SupplierLotNo;
toStorageDetail.Unit = fromStorageDetail.Unit;
toStorageDetail.ValidStartDate = fromStorageDetail.ValidStartDate;
facade.AddStorageDetail(toStorageDetail);
}
#region add by sam 2016年4月27日
storageDetailSn.CartonNo = tcarton;
facade.UpdateStorageDetailSN(storageDetailSn);
fromStorageDetail.StorageQty -= 1;
fromStorageDetail.AvailableQty -= 1;
facade.UpdateStorageDetail(fromStorageDetail);
toStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(tcarton);
toStorageDetail.StorageQty += 1;
toStorageDetail.AvailableQty += 1;
facade.UpdateStorageDetail(toStorageDetail);
#endregion
StorloctransDetail storloctransDetail = (StorloctransDetail)_WarehouseFacade.GetStorloctransdetail(transNo, fromStorageDetail.MCode);
storloctransDetail.Qty += fromStorageDetail.AvailableQty;
_WarehouseFacade.UpdateStorloctransdetail(storloctransDetail);
StorloctransDetailCarton storloctransDetailCarton =
(StorloctransDetailCarton)
_WarehouseFacade.GetStorloctransdetailcarton(transNo, fromCarton,
tcarton);
if (storloctransDetailCarton != null)
{// 如果有： 更新TBLStorLocTransDetailCarton.QTY+ PDA页面填的数量，MDate，MTime，MUser。
storloctransDetailCarton.Qty += 1;
storloctransDetailCarton.MaintainDate = dbDateTime.DBDate;
storloctransDetailCarton.MaintainTime = dbDateTime.DBTime;
storloctransDetailCarton.MaintainUser = userCode;
_WarehouseFacade.UpdateStorloctransdetailcarton(storloctransDetailCarton);
}
else
{
#region 4， 向TBLStorLocTransDetailCarton插入一笔数据。
StorloctransDetailCarton newstorlocDetailCarton = new StorloctransDetailCarton();
newstorlocDetailCarton.Transno = transNo;// storloctransdetailObj.Transno; //storlocDetailCarton.Transno = StorLocTransDetail.TransNo;
newstorlocDetailCarton.DqmCode = storloctransdetailObj.DqmCode;
newstorlocDetailCarton.FacCode = "10Y2";
newstorlocDetailCarton.MCode = storloctransdetailObj.MCode; //MCODE：TBLStorLocTransDetail.MCODE
newstorlocDetailCarton.Qty = 1; // //QTY: 1
newstorlocDetailCarton.LocationCode = tLocationCode; // FormatHelper.CleanString(txtTLocationCodeEdit.Text);//LocationCode: TBLLOCATION.LOCATIONCODE(根据PDA页面的目标货位找)
newstorlocDetailCarton.Cartonno = tcarton; // FormatHelper.CleanString(txtTLocationCartonEdit.Text);//CARTONNO：PDA页面的目标箱号 txtTLocationCartonEdit
newstorlocDetailCarton.FromlocationCode = fromStorageDetail.LocationCode; //FromLocationCode：TBLStorageDetail.LocationCode
newstorlocDetailCarton.Fromcartonno = fromCarton; // rageDetail.CartonNo; //FromCARTONNO：TBLStorageDetail. CARTONNO
newstorlocDetailCarton.Lotno = fromStorageDetail.Lotno; //LotNo：TBLStorageDetail. LotNo
newstorlocDetailCarton.CUser = userCode; // CUSER
newstorlocDetailCarton.CDate = dbDateTime.DBDate; // CDATE
newstorlocDetailCarton.CTime = dbDateTime.DBTime; // CTIME
newstorlocDetailCarton.MaintainDate = dbDateTime.DBDate; // MDATE
newstorlocDetailCarton.MaintainTime = dbDateTime.DBTime; // MTIME
newstorlocDetailCarton.MaintainUser = userCode;
_WarehouseFacade.AddStorloctransdetailcarton(newstorlocDetailCarton);
#endregion
//说明：表中没有的字段来自TBLStorageDetail中对应字段
//F 向表TBLStorLocTransDetailSN插入一条数据。
StorloctransDetailSN newStorloctransDetailSn = new StorloctransDetailSN();
newStorloctransDetailSn.Sn = inputsn; //SN：TBLStorageDetailSN.SN
newStorloctransDetailSn.Transno = storloctransdetailObj.Transno; // TBLStorLocTransDetail. TransNo
newStorloctransDetailSn.Fromcartonno = fromCarton; //TBLStorageDetail.LocationCode
newStorloctransDetailSn.Cartonno = tcarton; // FormatHelper.CleanString(txtTLocationCodeEdit.Text);//CARTONNO：TBLLOCATION.LOCATIONCODE(根据PDA页面的目标货位找)
newStorloctransDetailSn.MaintainDate = dbDateTime.DBDate; // MDATE
newStorloctransDetailSn.MaintainTime = dbDateTime.DBTime; // MTIME
newStorloctransDetailSn.MaintainUser = userCode;
_WarehouseFacade.AddStorloctransdetailsn(newStorloctransDetailSn);
}
#endregion
}
else
{
#region 和非单件管控
//B 检查TBLStorageDetail. AvailableQTY>PDA页面填的数量。如果否，提示：输入的数量大于库存可用数量。
#region Check 数量
int qty;
if (!string.IsNullOrEmpty(inputqty))
{
try
{
qty = Int32.Parse(inputqty);
}
catch (Exception ex)
{
msg = "数量只能输入大于0的数字";
return(msg);
}
if (qty <= 0)
{
msg = "数量只能输入大于0的数字";
return(msg);
}
}
else
{
msg = "数量不能为空";
return(msg);
}
#endregion
decimal stroageQTY = fromStorageDetail.StorageQty - fromStorageDetail.FreezeQty;
if (stroageQTY < qty)
{
msg = "输入的数量大于库存可用数量";
return(msg);
}
fromStorageDetail.AvailableQty -= qty;
fromStorageDetail.StorageQty -= qty;
facade.UpdateStorageDetail(fromStorageDetail);
if (toStorageDetail == null)
{
toStorageDetail = new StorageDetail();
toStorageDetail.AvailableQty = 0;
toStorageDetail.CartonNo = tcarton;
toStorageDetail.CDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.CTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.CUser = userCode;
toStorageDetail.DQMCode = fromStorageDetail.DQMCode;
toStorageDetail.FacCode = fromStorageDetail.FacCode;
toStorageDetail.FreezeQty = 0;
toStorageDetail.LastStorageAgeDate = fromStorageDetail.LastStorageAgeDate;
toStorageDetail.LocationCode = tLocationCode;
toStorageDetail.Lotno = fromStorageDetail.Lotno;
toStorageDetail.MaintainDate = FormatHelper.TODateInt(DateTime.Now);
toStorageDetail.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
toStorageDetail.MaintainUser = userCode;
toStorageDetail.MCode = fromStorageDetail.MCode;
toStorageDetail.MDesc = fromStorageDetail.MDesc;
toStorageDetail.ProductionDate = fromStorageDetail.ProductionDate;
toStorageDetail.ReworkApplyUser = fromStorageDetail.ReworkApplyUser;
toStorageDetail.StorageAgeDate = fromStorageDetail.StorageAgeDate;
toStorageDetail.StorageCode = fromStorageDetail.StorageCode;
toStorageDetail.StorageQty = 0;
toStorageDetail.SupplierLotNo = fromStorageDetail.SupplierLotNo;
toStorageDetail.Unit = fromStorageDetail.Unit;
toStorageDetail.ValidStartDate = fromStorageDetail.ValidStartDate;
facade.AddStorageDetail(toStorageDetail);
}
toStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(tcarton);
toStorageDetail.StorageQty += qty;
toStorageDetail.AvailableQty += qty;
facade.UpdateStorageDetail(toStorageDetail);
StorloctransDetailCarton storloctransDetailCarton =
(StorloctransDetailCarton)
_WarehouseFacade.GetStorloctransdetailcarton(transNo, fromCarton,
tcarton);
if (storloctransDetailCarton != null)
{ // 如果有： 更新TBLStorLocTransDetailCarton.QTY+ PDA页面填的数量，MDate，MTime，MUser。
storloctransDetailCarton.Qty += qty; // int.Parse(txtNumEdit.Text);
storloctransDetailCarton.MaintainDate = dbDateTime.DBDate;
storloctransDetailCarton.MaintainTime = dbDateTime.DBTime;
storloctransDetailCarton.MaintainUser = userCode;
_WarehouseFacade.UpdateStorloctransdetailcarton(storloctransDetailCarton);
}
else
{
#region 如果没有：插入一条数据 向TBLStorLocTransDetailCarton插入一笔数据。
StorloctransDetailCarton newstorlocDetailCarton = new StorloctransDetailCarton();
newstorlocDetailCarton.Transno = transNo; // storloctransdetailObj.Transno;
newstorlocDetailCarton.DqmCode = fromStorageDetail.DQMCode; // storloctransdetailObj.DqmCode;
newstorlocDetailCarton.FacCode = fromStorageDetail.FacCode;
newstorlocDetailCarton.MCode = storageCarton.MCode; // storloctransdetailObj.MCode;//MCODE：TBLStorLocTransDetail.MCODE
newstorlocDetailCarton.Qty = qty; //QTY: 1
newstorlocDetailCarton.LocationCode = tLocationCode; //FormatHelper.CleanString(txtTLocationCodeEdit.Text);//LocationCode: TBLLOCATION.LOCATIONCODE(根据PDA页面的目标货位找)
newstorlocDetailCarton.Cartonno = tcarton; // FormatHelper.CleanString(txtTLocationCartonEdit.Text);//CARTONNO：PDA页面的目标箱号 txtTLocationCartonEdit
newstorlocDetailCarton.FromlocationCode = fromStorageDetail.LocationCode; //FromLocationCode：TBLStorageDetail.LocationCode
newstorlocDetailCarton.Fromcartonno = fromCarton; // storageDetail.CartonNo; //FromCARTONNO：TBLStorageDetail. CARTONNO
newstorlocDetailCarton.Lotno = storageCarton.Lotno; //LotNo：TBLStorageDetail. LotNo
newstorlocDetailCarton.CUser = userCode; // CUSER
newstorlocDetailCarton.CDate = dbDateTime.DBDate; // CDATE
newstorlocDetailCarton.CTime = dbDateTime.DBTime; // CTIME
newstorlocDetailCarton.MaintainDate = dbDateTime.DBDate; // MDATE
newstorlocDetailCarton.MaintainTime = dbDateTime.DBTime; // MTIME
newstorlocDetailCarton.MaintainUser = userCode;
_WarehouseFacade.AddStorloctransdetailcarton(newstorlocDetailCarton);
#endregion
}
#endregion
}
}
}
#endregion
fromStorageDetail = (StorageDetail)_WarehouseFacade.GetStorageDetail(fromCarton);
if (fromStorageDetail != null && fromStorageDetail.StorageQty == 0)
{
_WarehouseFacade.DeleteStorageDetail(fromStorageDetail);
}
string documentno = CreateAutoDocmentsNo();
SaveDocmentsNo(documentno, userCode);
this.DataProvider.CommitTransaction();
msg = "提交成功";
return(msg);
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
msg = ex.Message;
return(msg);
}
}
protected void InitialObjects(object[] asnList)
{
//1> 入库指令号状态为：WaitReceive:待收货，则修改入库指令号(TBLASN、TBLASNDETAIL)状态为：Release:初始化
//2> 入库指令号状态不为：WaitReceive:待收货，则报错提示当前入库指令号不能取消下发
try
{
InventoryFacade facade = new InventoryFacade(base.DataProvider);
WarehouseFacade _wa = new WarehouseFacade(DataProvider);
//foreach (ASN asn in asnList)
// {
ASN asn = (ASN)asnList[0];
if (asn.Status != "Release" && asn.Status != "Receive" && asn.Status != "WaitReceive")
{
WebInfoPublish.Publish(this, asn.StNo + "入库指令号不能取消下发,状态必须是到货初检中才能取消下发", this.languageComponent1);
return;
}
this.DataProvider.BeginTransaction();
_wa.UpdateASNForCancelDown(new string[] { asn.StNo }, "Release");
facade.UpdateASNDetail(asn.StNo, ASNHeadStatus.Release);
facade.UpdateASNDetailSN(asn.StNo);
//facade.UpdateASNDetailItem(asn.StNo);
DBDateTime dbTime1 = FormatHelper.GetNowDBDateTime(this.DataProvider);
InvInOutTrans trans = _wa.CreateNewInvInOutTrans();
trans.CartonNO = string.Empty;
trans.DqMCode = " ";
trans.FacCode = asn.FacCode;
trans.FromFacCode = string.Empty;
trans.FromStorageCode = string.Empty;
trans.InvNO = asn.InvNo;
trans.InvType = asn.StType;
trans.LotNo = string.Empty;
trans.MaintainDate = dbTime1.DBDate;
trans.MaintainTime = FormatHelper.TOTimeInt(DateTime.Now);
trans.MaintainUser = this.GetUserCode();
trans.MCode = " ";
trans.ProductionDate = 0;
trans.Qty = 0;
trans.Serial = 0;
trans.StorageAgeDate = 0;
trans.StorageCode = asn.StorageCode;
trans.SupplierLotNo = string.Empty;
trans.TransNO = asn.StNo;
trans.TransType = "IN";
trans.Unit = string.Empty;
trans.ProcessType = "CANCELISSUE";
_wa.AddInvInOutTrans(trans);
this.DataProvider.CommitTransaction();
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
throw ex;
}
}
//protected override void gridWebGrid_ItemCommand(GridRecord row, string commandName)
//{
// if (commandName == "Edit")
// {
// object obj = this.GetEditObject(row);
// if (obj != null)
// {
// this.SetEditObject(obj);
// this.buttonHelper.PageActionStatusHandle(PageActionType.Update);
// }
// }
// else if (commandName == "LinkDetail")
// {
// string pickNo = row.Items.FindItemByKey("PickNo").Text.Trim();
// //string storageOut = row.Items.FindItemByKey("StorageOut").Text.Trim();
// Response.Redirect(this.MakeRedirectUrl("FCreatePickLineMP.aspx", new string[] { "ACT", "PickNo" }, new string[] { "LinkDetail", pickNo }));
// }
//}
protected override void cmdExport_Click(object sender, EventArgs e)
{
BenQGuru.eMES.Material.WarehouseFacade _WarehouseFacade = new BenQGuru.eMES.Material.WarehouseFacade(base.DataProvider);
List <string> ca = new List <string>();
XlsPackage xls = new XlsPackage();
IFont font = xls.Black;
font.FontHeightInPoints = 10;
ICellStyle style = xls.Normal;
style.SetFont(font);
xls.CreateSheet("IQC明细表");
xls.NewRow(0);
xls.Cell(0, "IQC单号", style);
xls.Cell(1, "SAP单据号", style);
//xls.Cell(2, "SAP单据号", style);
xls.Cell(2, "入库类型", style);
xls.Cell(3, "库位", style);
xls.Cell(4, "供应商代码", style);
xls.Cell(5, "供应商名称", style);
xls.Cell(6, "鼎桥物料编码", style);
xls.Cell(7, "供应商物料编码", style);
xls.Cell(8, "鼎桥物料描述", style);
xls.Cell(9, "检验方式", style);
xls.Cell(10, "AQL标准", style);
xls.Cell(11, "来料数量", style);
xls.Cell(12, "样本数量", style);
xls.Cell(13, "缺陷品数", style);
xls.Cell(14, "退换货数量", style);
xls.Cell(15, "现场整改数量", style);
xls.Cell(16, "让步接收数量", style);
xls.Cell(17, "特采放行数量", style);
int cellNum = 18;
SystemSettingFacade _SystemSettingFacade = new SystemSettingFacade(base.DataProvider);
object[] objs = _SystemSettingFacade.GetErrorGroupcode();
if (objs != null && objs.Length > 0)
{
foreach (ErrorCodeGroupA ecg in objs)
{
xls.Cell(cellNum, ecg.ErrorCodeGroupDescription, style);
cellNum++;
}
}
xls.Cell(cellNum++, "创建时间", style);
xls.Cell(cellNum++, "QC检验完成时间", style);
xls.Cell(cellNum++, "SQE判定完成时间", style);
xls.Cell(cellNum++, "IQC检验完成时间", style);
xls.Cell(cellNum++, "QC检验执行时间", style);
xls.Cell(cellNum++, "SQE判定执行时间", style);
xls.Cell(cellNum++, "IQC检验执行时间", style);
int rowNum = 1;
IQCDetailRecord[] iqcs = _WarehouseFacade.QueryIQCs(this.txtStorageCodeQuery.Text,
this.txtVendorCodeQuery.Text, this.drpStorageInTypeQuery.SelectedValue,
FormatHelper.TODateInt(dateInDateFromQuery.Text),
FormatHelper.TODateInt(dateInDateToQuery.Text));
InventoryFacade _InventoryFacade = new InventoryFacade(base.DataProvider);
for (int i = 0; i < iqcs.Length; i++)
{
xls.NewRow(rowNum);
string iqcNO = iqcs[i].IQCNO;
xls.Cell(0, iqcNO, style);
string invNo = iqcs[i].INVNO;
xls.Cell(1, invNo, style);
string stType = iqcs[i].STTYPE;
xls.Cell(2, stType, style);
string StorageCode = iqcs[i].StorageCode;
xls.Cell(3, StorageCode, style);
string VENDORCODE = iqcs[i].VENDORCODE;
xls.Cell(4, VENDORCODE, style);
string VendorName = iqcs[i].VendorName;
xls.Cell(5, VendorName, style);
string DQMCODE = iqcs[i].DQMCODE;
xls.Cell(6, DQMCODE, style);
string VENDORMCODE = iqcs[i].VENDORMCODE;
xls.Cell(7, VENDORMCODE, style);
Domain.MOModel.Material m = (Domain.MOModel.Material)_InventoryFacade.GetMaterialByDQMCode(iqcs[i].DQMCODE);
string MDESC = m.MchlongDesc;
xls.Cell(8, MDESC, style);
string IQCTYPE = iqcs[i].IQCTYPE;
xls.Cell(9, IQCTYPE, style);
string AQLLEVEL = iqcs[i].AQLLEVEL;
xls.Cell(10, AQLLEVEL, style);
string QTY = iqcs[i].QTY.ToString();
xls.Cell(11, QTY, style);
string IQCQTY = iqcs[i].SAMPLESIZE.ToString();
xls.Cell(12, IQCQTY, style);
string NGQTY = iqcs[i].NGQTY.ToString();
xls.Cell(13, NGQTY, style);
string RETURNQTY = iqcs[i].RETURNQTY.ToString();
xls.Cell(14, RETURNQTY, style);
string ReformQTY = iqcs[i].ReformQTY.ToString();
xls.Cell(15, ReformQTY, style);
string GiveQTY = iqcs[i].GiveQTY.ToString();
xls.Cell(16, GiveQTY, style);
string AcceptQTY = iqcs[i].AcceptQTY.ToString();
xls.Cell(17, AcceptQTY, style);
int cellNum2 = 18;
if (objs != null && objs.Length > 0)
{
foreach (ErrorCodeGroupA ecg in objs)
{
int num = _WarehouseFacade.GetErrorGroupNum(iqcs[i].IQCNO, ecg.ErrorCodeGroup);
xls.Cell(cellNum2, num, style);
cellNum2++;
}
}
string CDATE = iqcs[i].CDATE.ToString();
xls.Cell(cellNum2++, CDATE, style);
InvInOutTrans OCFinishInv = _WarehouseFacade.QCFinishDateTimeTrans(iqcs[i].IQCNO);
InvInOutTrans SQEFinishInv = _WarehouseFacade.SQEFinishDateTimeTrans(iqcs[i].IQCNO);
InvInOutTrans IQCFinishInv = SQEFinishInv ?? (OCFinishInv ?? null);
string QCFINISHDATEStr = OCFinishInv != null?FormatHelper.ToDateString(OCFinishInv.MaintainDate) : string.Empty;
string SEQFINISHDATEStr = SQEFinishInv != null?FormatHelper.ToDateString(SQEFinishInv.MaintainDate) : string.Empty;
string IQCFINISHDATEStr = IQCFinishInv != null?FormatHelper.ToDateString(IQCFinishInv.MaintainDate) : string.Empty;
decimal QCDATERANGE = OCFinishInv != null?Common.Totalday(OCFinishInv.MaintainDate, OCFinishInv.MaintainTime, iqcs[i].CDATE, iqcs[i].CTIME) : (decimal)0;
string IQCSEQDATERANGE = string.Empty;
string IQCDATERANGEStr = string.Empty;
if (OCFinishInv != null && SQEFinishInv != null)
{
IQCSEQDATERANGE = Common.Totalday(SQEFinishInv.MaintainDate, SQEFinishInv.MaintainTime, OCFinishInv.MaintainDate, OCFinishInv.MaintainTime).ToString();
}
if (IQCFinishInv != null)
{
IQCDATERANGEStr = Common.Totalday(IQCFinishInv.MaintainDate, IQCFinishInv.MaintainTime, iqcs[i].CDATE, iqcs[i].CTIME).ToString();
}
xls.Cell(cellNum2++, QCFINISHDATEStr, style);
xls.Cell(cellNum2++, SEQFINISHDATEStr, style);
xls.Cell(cellNum2++, IQCFINISHDATEStr, style);
xls.Cell(cellNum2++, QCDATERANGE.ToString(), style);
xls.Cell(cellNum2++, IQCSEQDATERANGE, style);
xls.Cell(cellNum2++, IQCDATERANGEStr, style);
rowNum++;
}
string filename = string.Format("Export_{0}_{1}.{2}", FormatHelper.TODateInt(System.DateTime.Now).ToString(), FormatHelper.TOTimeInt(System.DateTime.Now).ToString(), "xls");
string filepath = string.Format(@"{0}{1}", this.DownloadPhysicalPath, filename);
FileStream file = new FileStream(filepath, FileMode.Create, FileAccess.ReadWrite);
xls.Save(file);
file.Close();
DownLoadFile1(filename);
}
protected override DataRow GetGridRow(object obj)
{
if (facade == null)
{
facade = new WarehouseFacade(base.DataProvider);
}
DataRow row = this.DtSource.NewRow();
IQCDetailRecord s = (IQCDetailRecord)obj;
InventoryFacade _InventoryFacade = new InventoryFacade(base.DataProvider);
Domain.MOModel.Material m = (Domain.MOModel.Material)_InventoryFacade.GetMaterialByDQMCode(s.DQMCODE);
row["IQCNO"] = s.IQCNO;
row["INVNO"] = s.INVNO;
row["STTYPE"] = this.GetInvInName(s.STTYPE);
row["StorageCode"] = s.StorageCode;
row["VENDORCODE"] = s.VENDORCODE;
row["VendorName"] = s.VendorName;
row["DQMCODE"] = s.DQMCODE;
row["VENDORMCODE"] = s.VENDORMCODE;
row["MDESC1111"] = m.MchlongDesc;
row["IQCTYPE"] = s.IQCTYPE;
row["AQLLEVEL"] = s.AQLLEVEL;
row["QTY"] = s.QTY;
row["IQCQTY"] = s.SAMPLESIZE;
row["NGQTY"] = s.NGQTY;
row["RETURNQTY"] = s.RETURNQTY;
row["ReformQTY"] = s.ReformQTY;
row["GiveQTY"] = s.GiveQTY;
row["AcceptQTY"] = s.AcceptQTY;
SystemSettingFacade _SystemSettingFacade = new SystemSettingFacade(base.DataProvider);
object[] objs = _SystemSettingFacade.GetErrorGroupcode();
if (objs != null && objs.Length > 0)
{
foreach (ErrorCodeGroupA ecg in objs)
{
row[ecg.ErrorCodeGroup] = facade.GetErrorGroupNum(s.IQCNO, ecg.ErrorCodeGroup);
}
}
row["CDATE"] = FormatHelper.ToDateString(s.CDATE);
InvInOutTrans OCFinishInv = facade.QCFinishDateTimeTrans(s.IQCNO);
InvInOutTrans SQEFinishInv = facade.SQEFinishDateTimeTrans(s.IQCNO);
InvInOutTrans IQCFinishInv = SQEFinishInv ?? (OCFinishInv ?? null);
row["QCFINISHDATE"] = OCFinishInv != null?FormatHelper.ToDateString(OCFinishInv.MaintainDate) : string.Empty;
row["SEQFINISHDATE"] = SQEFinishInv != null?FormatHelper.ToDateString(SQEFinishInv.MaintainDate) : string.Empty;
row["IQCFINISHDATE"] = IQCFinishInv != null?FormatHelper.ToDateString(IQCFinishInv.MaintainDate) : string.Empty;
row["QCDATERANGE"] = OCFinishInv != null?Common.Totalday(OCFinishInv.MaintainDate, OCFinishInv.MaintainTime, s.CDATE, s.CTIME) : 0;
if (OCFinishInv != null && SQEFinishInv != null)
{
row["IQCSEQDATERANGE"] = Common.Totalday(SQEFinishInv.MaintainDate, SQEFinishInv.MaintainTime, OCFinishInv.MaintainDate, OCFinishInv.MaintainTime);
}
else
{
row["IQCSEQDATERANGE"] = string.Empty;
}
if (IQCFinishInv != null)
{
row["IQCDATERANGE"] = Common.Totalday(IQCFinishInv.MaintainDate, IQCFinishInv.MaintainTime, s.CDATE, s.CTIME);
}
else
{
row["IQCDATERANGE"] = string.Empty;
}
return(row);
}