void OnGUI()
{
if (_instance)
{
_instance = this;
//gm = GameObject.FindGameObjectWithTag("GameManager").GetComponent<GameManagerT2>();
}
CheckScenePath();
InitGUIStyle();
GUILayout.Space(20);
GUILayout.Label("机构动作展示课件编辑器", titleLabelStyle0);
GUILayout.Space(20);
isShowMechanismControl = EditorGUILayout.Foldout(isShowMechanismControl, "机舱", titleLabelStyle1); // 定义折叠菜单
if (isShowMechanismControl)
{
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("导入驾驶舱界面", GUILayout.Height(20), GUILayout.Width(position.width * 0.2f)))
{
importCabinWindow = EditorWindow.GetWindow <ImportCabinWindow>(true, "导入机舱界面");
importCabinWindow.minSize = new Vector2(350, 100);
importCabinWindow.maxSize = new Vector2(350, 100);
importCabinWindow.position = new Rect(600, 400, 350, 100);
importCabinWindow.Show();
}
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("添加控制按钮", GUILayout.Height(20), GUILayout.Width(position.width * 0.2f)))
{
addButtonPanel = EditorWindow.GetWindow <AddButtonPanel>(true, "添加控制按钮");
addButtonPanel.minSize = new Vector2(400, 400);
addButtonPanel.maxSize = new Vector2(400, 400);
addButtonPanel.position = new Rect(600, 400, 400, 400);
addButtonPanel.Show();
}
}
GUILayout.EndHorizontal();
}
GUILayout.Space(20);
isShowModleImport = EditorGUILayout.Foldout(isShowModleImport, "模型导入", titleLabelStyle1); // 定义折叠菜单
if (isShowModleImport)
{
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("添加环境模型", GUILayout.Width(position.width * 0.2f)))
{
impotEnvironmentalModel = EditorWindow.GetWindow <ImpotEnvironmentalModel>(true, "导入机构模型");
impotEnvironmentalModel.minSize = new Vector2(350, 100);
impotEnvironmentalModel.maxSize = new Vector2(350, 100);
impotEnvironmentalModel.position = new Rect(600, 400, 350, 100);
impotEnvironmentalModel.Show();
}
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("导入机构模型", GUILayout.Width(position.width * 0.2f)))
{
importMechanismModelWindow = EditorWindow.GetWindow <ImportMechanismModelWindow>(true, "导入机构模型");
importMechanismModelWindow.minSize = new Vector2(350, 100);
importMechanismModelWindow.maxSize = new Vector2(350, 100);
importMechanismModelWindow.position = new Rect(600, 400, 350, 100);
importMechanismModelWindow.Show();
}
}
GUILayout.EndHorizontal();
}
GUILayout.Space(20);
isShowMechanismControl = EditorGUILayout.Foldout(isShowMechanismControl, "机构控制", titleLabelStyle1); // 定义折叠菜单
if (isShowMechanismControl)
{
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("机构运动控制分步模式", GUILayout.Width(position.width * 0.2f)))
{
addDriveWindow = EditorWindow.GetWindow <AddDriveWindow>(true, "机构运动控制分步模式");
addDriveWindow.minSize = new Vector2(400, 400);
addDriveWindow.maxSize = new Vector2(400, 400);
addDriveWindow.position = new Rect(600, 400, 400, 400);
addDriveWindow.Show();
}
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("机构运动控制演示模式", GUILayout.Width(position.width * 0.2f)))
{
addAutoDriveWindow = EditorWindow.GetWindow <AddAotuDriveWindow>(true, "机构运动控制演示模");
addAutoDriveWindow.minSize = new Vector2(350, 130);
addAutoDriveWindow.maxSize = new Vector2(350, 130);
addAutoDriveWindow.position = new Rect(600, 400, 350, 130);
addAutoDriveWindow.Show();
}
}
GUILayout.EndHorizontal();
GUILayout.Space(20);
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("控制流程");
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("零件名");
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("控制器");
}
GUILayout.EndHorizontal();
GUILayout.Space(10);
}
GUILayout.Space(20);
isShowDisassembly = EditorGUILayout.Foldout(isShowDisassembly, "拆卸安装", titleLabelStyle1); // 定义折叠菜单
if (isShowDisassembly)
{
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("添加拆装流程", GUILayout.Width(position.width * 0.2f)))
{
addDisassemblyWindow = EditorWindow.GetWindow <AddDisassemblyWindow>(true, "添加拆装流程");
addDisassemblyWindow.minSize = new Vector2(400, 400);
addDisassemblyWindow.maxSize = new Vector2(400, 400);
addDisassemblyWindow.position = new Rect(600, 400, 400, 400);
addDisassemblyWindow.Show();
}
GUILayout.Space(position.width * 0.2f);
if (GUILayout.Button("删除拆装流程", GUILayout.Width(position.width * 0.2f)))
{
}
}
GUILayout.EndHorizontal();
GUILayout.Space(20);
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("拆装流程");
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("零件名");
GUILayout.Space(position.width * 0.1f);
GUILayout.Label("拆装工具");
}
GUILayout.EndHorizontal();
GUILayout.Space(10);
/*
* int dsCount = gm.disassemblySteps.Count;
* for (int i = 0; i < dsCount; i++)
* {
* GUILayout.BeginHorizontal();
* {
* string part_name = gm.disassemblySteps[i].PartName;
* int toolIndex = gm.disassemblySteps[i].ToolIndex;
* string show_name;
* string tool_name = " ";
*
* if (part_name.Length > 15)
* {
* show_name = part_name.Substring(0, 10) + "...";
* }
* else
* {
* show_name = part_name;
* }
*
* if(toolIndex==0)
* {
* tool_name = "手";
* }
*
* if (toolIndex == 1)
* {
* tool_name = "螺丝刀";
* }
*
* if (toolIndex == 2)
* {
* tool_name = "扳手";
* }
*
* GUILayout.Space(position.width * 0.1f);
* GUILayout.Label((i+1).ToString());
* GUILayout.Space(position.width * 0.1f);
* GUILayout.Label(show_name);
* GUILayout.Space(position.width * 0.1f);
* GUILayout.Label(tool_name);
* }
* GUILayout.EndHorizontal();
* }*/
}
GUILayout.Space(20);
GUILayout.BeginHorizontal();
{
GUILayout.Space(position.width * 0.375f);
if (GUILayout.Button("保存场景", GUILayout.Width(position.width * 0.25f)))
{
EditorSceneManager.SaveScene(EditorSceneManager.GetActiveScene());
//输出拆装流程
}
}
GUILayout.EndHorizontal();
}
void Awake()
{
_instance = this;
gm = GameObject.FindGameObjectWithTag("GameManager").GetComponent <GameManagerT2>();
}