// This is the best DI factory sample.
public static void Run()
{
Console.WriteLine($"开始运行{nameof(Demo5)}");
ContainerBuilder cb = new ContainerBuilder();
cb.RegisterModule <CoreModule>();
cb.RegisterModule <SmsCoreModule>();
cb.RegisterModule <ConsoleSmsModule>();
cb.RegisterModule <HttpApiSmsModule>();
cb.RegisterInstance(new SmsConfig
{
SmsSenderType = SmsSenderType.HttpAPi
}).As <SmsConfig>();
IContainer container = cb.Build();
IUserBll userBll = container.Resolve <IUserBll>();
Console.WriteLine(userBll.GetHashCode());
bool login = userBll.Login("12345678901", "Password");
Console.WriteLine(login);
login = userBll.Login("10987654321", "ytrewq");
Console.WriteLine(login);
Console.WriteLine($"结束运行{nameof(Demo5)}");
}
public static void Run()
{
// Also abstracted the factory, it is better than demo3 for factory
Console.WriteLine($"开始运行{nameof(Demo4)}");
ContainerBuilder cb = new ContainerBuilder();
cb.RegisterType <UserDal>().As <IUserDal>();
cb.RegisterType <UserBll>().As <IUserBll>();
cb.RegisterType <SmsSenderFactory>().As <ISmsSenderFactory>();
cb.RegisterType <ConsoleSmsSenderFactoryHandler>()
.As <ISmsSenderFactoryHandler>();
cb.RegisterType <SmsSenderFactoryHandler>()
.As <ISmsSenderFactoryHandler>();
cb.RegisterType <ConfigProvider>().As <IConfigProvider>();
IContainer container = cb.Build();
IUserBll userBll = container.Resolve <IUserBll>();
bool login = userBll.Login("12345678901", "Password");
Console.WriteLine(login);
login = userBll.Login("10987654321", "ytrewq");
Console.WriteLine(login);
Console.WriteLine($"结束运行{nameof(Demo4)}");
}
private static void UseAutoFac()
{
//创建容器构造者，用于注册组件和服务（组件：接口实现类，服务：接口）
ContainerBuilder builder = new ContainerBuilder();
//注册组件UserBll类，并把服务IUserBll接口暴露给该组件
//把服务（IUserBll）暴露给组件（UserBll）
builder.RegisterType <UserBll>().As <IUserBll>();
// builder.RegisterType<DogBll>().As<IAnimalBll>();//把DogBll类注册给IAnimalBll接口，注意在TestBllImpl项目中有多个IAnimalBll的实现类
builder.RegisterType <DogBll>().Named <IAnimalBll>("Dog");
builder.RegisterType <CatBll>().Named <IAnimalBll>("Cat");
//创建容器
IContainer container = builder.Build();
//使用容器解析服务（不推荐这样，可能造成内存的泄露）
//IUserBll userBll = container.Resolve<IUserBll>();
//IAnimalBll dogBll = container.Resolve<IAnimalBll>();
//使用容器的生命周期解析服务（这样可以确保服务实例被妥善地释放和垃圾回收）
using (ILifetimeScope scope = container.BeginLifetimeScope())
{
IUserBll userBll = scope.Resolve <IUserBll>();
IAnimalBll dogBll = scope.ResolveNamed <IAnimalBll>("Dog");
IAnimalBll catBll = scope.ResolveNamed <IAnimalBll>("Cat");
userBll.Login("shanzm", "123456");
dogBll.Cry();
catBll.Cry();
}
}
//在使用AutoFac的时候， 建议所有的实现类都写成无状态的
//无状态的就是实现类中只去实现接口，而不要添加一些属性和字段
//这样在注册接口的时候，所有的实现类的对象可以设置为单例模式
//即整个系统中实现类的对象只有一个，降低了内存的占用，而且不会存在数据修改形成的脏数据
private static void UseAutoFac6()
{
ContainerBuilder builder = new ContainerBuilder();
Assembly asm = Assembly.Load(" TestBLLImpl");
//这里通过使用SingleInstance()实现注册给接口的实现类的对象以单例模式
builder.RegisterAssemblyTypes(asm).AsImplementedInterfaces().SingleInstance();
IContainer container = builder.Build();
//IUserBll userBll1 = container.Resolve<IUserBll>();
//userBll1.Login("shanzm", "1111");
//IUserBll userBll2 = container.Resolve<IUserBll>();
//userBll2.Login("shanzm", "2222");
using (var scope = container.BeginLifetimeScope())
{
IUserBll userBll1 = scope.Resolve <IUserBll>();
userBll1.Login("shanzm", "1111");
IUserBll userBll2 = scope.Resolve <IUserBll>();
userBll2.Login("shanzm", "2222");
//对比你就会发现，其实userBll1和userBll2指向的是同一个对象
//因为是单例模式，所以在该程序中所有创建的IUserBll对象都是同一个。
//若是去掉.SingleInstance()则会打印为false，即默认的不是单例模式
Console.WriteLine(ReferenceEquals(userBll1, userBll2));//打印结果:true
}
}
public static void Run()
{
Console.WriteLine($"开始运行{nameof(Demo1)}");
ContainerBuilder cb = new ContainerBuilder();
cb.RegisterType <UserDal>().As <IUserDal>();
cb.RegisterType <UserBll>().As <IUserBll>();
cb.RegisterType <ConsoleSmsSender>().As <ISmsSender>();
IContainer container = cb.Build();
IUserBll userBll = container.Resolve <IUserBll>();
bool login = userBll.Login("12345678901", "Password");
Console.WriteLine(login);
login = userBll.Login("10987654321", "ytrewq");
Console.WriteLine(login);
Console.WriteLine($"结束运行{nameof(Demo1)}");
}
private void button1_Click(object sender, EventArgs e)
{
if (IsChange && CurrentUser.UserName == txtUserName.Text.Trim())
{
this.ShowInfo("当前登录账户相同.");
return;
}
if (checkBox1.Checked)
{
if (string.IsNullOrEmpty(txtPhone.Text))
{
this.ShowInfo("请输入手机.");
}
}
else
{
if (string.IsNullOrEmpty(txtUserName.Text))
{
this.ShowInfo("请输入用户名..");
}
}
if (string.IsNullOrEmpty(txtPassword.Text))
{
this.ShowInfo("请输入密码.");
}
UserModel userModel = new UserModel
{
UserName = txtUserName.Text,
Phone = txtPhone.Text,
Password = txtPassword.Text,
Status = 1,
};
var user = _userBll.Login(userModel);
if (user != null)
{
CurrentUser = user;
//如果是切换用户,直接隐藏,否则弹出主页面.
if (!IsChange)
{
MainForm mainForm = new MainForm();
mainForm.Show();
}
var msg = $"操作员:{user.Name},工号:{user.UserName},{DateTime.Now.ToString()}登录成功.";
NLogger.LogInfo(msg, user.UserName);
this.Hide();
}
else
{
var msg = $"工号/手机号:{txtUserName.Text + txtPhone.Text},{DateTime.Now.ToString()}登录失败.";
NLogger.LogInfo(msg, txtUserName.Text + txtPhone.Text);
this.ShowInfo("用户名或密码错误.");
}
}
public static void Run()
{
Console.WriteLine($"开始运行{nameof(Demo2)}");
ContainerBuilder cb = new ContainerBuilder();
cb.RegisterType <UserDal>().As <IUserDal>();
cb.RegisterType <UserBll>().As <IUserBll>();
// 使用预编译命令，使得 Release 和 Debug 版本注册的对象不同，从而实现调用的短信API不同
#if DEBUG
cb.RegisterType <ConsoleSmsSender>().As <ISmsSender>();
#else
cb.RegisterType <HttpApiSmsSender>().As <ISmsSender>();
#endif
IContainer container = cb.Build();
IUserBll userBll = container.Resolve <IUserBll>();
bool login = userBll.Login("12345678901", "Password");
Console.WriteLine(login);
login = userBll.Login("10987654321", "ytrewq");
Console.WriteLine(login);
Console.WriteLine($"结束运行{nameof(Demo2)}");
}
public static void Run()
{
Console.WriteLine($"开始运行{nameof(Demo3)}");
ContainerBuilder cb = new ContainerBuilder();
cb.RegisterType <UserDal>().As <IUserDal>();
cb.RegisterType <UserBll>().As <IUserBll>();
cb.RegisterType <SmsSenderFactory>().As <ISmsSenderFactory>();
cb.RegisterType <ConfigProvider>().As <IConfigProvider>();
// The default value for enum in register is the first enum. Here is Console
//cb.RegisterType<SmsConfig>().As<SmsConfig>();
// This kind of writing is better than reading directly through the configuration in the class.
// More flexible...
/*
* Note:
* I think in this case, ContainerBuilder cannot register an enum instance.
* So we can only register the SmsConfig instance.
*/
cb.RegisterInstance(new SmsConfig
{
SmsSenderType = SmsSenderType.Console
}).As <SmsConfig>();
IContainer container = cb.Build();
IUserBll userBll = container.Resolve <IUserBll>();
bool login = userBll.Login("12345678901", "Password");
Console.WriteLine(login);
login = userBll.Login("10987654321", "ytrewq");
Console.WriteLine(login);
Console.WriteLine($"结束运行{nameof(Demo3)}");
}
//一个实现类实现了多个接口
private static void UseAutoFac2()
{
ContainerBuilder builder = new ContainerBuilder();
//MasterBll实现了多个接口，我们可以把该类注册给他所有实现的接口
//换言之，只要是MasterBll实现的接口，我们都可以该他一个MasterBll类型的对象
//但是注意，这个MasterBll对象只包含当前接口的方法
builder.RegisterType <MasterBll>().AsImplementedInterfaces();//把MasterBll类注册给所有他实现的接口
//即一个组件暴露了多个服务，这里就等价于：
//builder.RegisterType<MasterBll>().As<IUserBll>().As<IMasterBll>();
IContainer container = builder.Build();
IUserBll userBll = container.Resolve <IUserBll>(); //其实这里的userBll是MasterBll类型的对象,但是只具有IUserBll接口中的方法
userBll.Login("shanzm", "11111"); //打印：登录用户是Master:shanzm
Console.WriteLine(userBll.GetType()); //打印：TestBLLImpl.MasterBll
}
void btnLogin_Click(object sender, EventArgs e)
{
if (string.IsNullOrEmpty(stbAccount.SkinTxt.Text))
{
errorProvider.SetError(stbAccount, "请您输入帐号后再登录！");
return;
}
if (string.IsNullOrEmpty(stbPassword.SkinTxt.Text))
{
errorProvider.SetError(stbPassword, "请您输入密码后再登录！");
return;
}
var user = new User
{
Account = stbAccount.SkinTxt.Text,
Password = stbPassword.SkinTxt.Text,
IsClient = _isClient
};
if (LoginCfg != null)
{
if (LoginCfg.RememberPassword && !_useInputPassword)
{
user.Password = LoginCfg.Password;
}
}
bool isAutoLogin = !_useInputPassword && LoginCfg != null &&
(LoginCfg.RememberPassword || LoginCfg.AutoLogin);
_globalApplicationData.ApplicationData.UpdateInfo = _updateInfoBll.Get();
_userBll.Login(new LoginInfo
{
User = user,
UpdateInfo = _globalApplicationData.ApplicationData.UpdateInfo
}, isAutoLogin, _loginResponse);
}
//把所有的接口实现类都注册
private static void UseAutoFac3()
{
//从上面几个示例，你可以发现好像使用依赖反转，好像有点麻烦！
//若是TestBLL中有许多类，需要注册，则就可以显示出使用控制反转的
ContainerBuilder builder = new ContainerBuilder();
Assembly asm = Assembly.Load(" TestBLLImpl"); //把TestBLLImpl程序集中的所有类都是注册给他的接口
builder.RegisterAssemblyTypes(asm).AsImplementedInterfaces(); //注意RegisterAssemblyTypes()的参数可以是多个程序集
IContainer container = builder.Build();
//其实到这里你就会发现使用AutoFac的便利了，
//你需要在TestIBLL项目中给定义每个接口，在TestBllImpl项目中去实现每个接口
//在TestUI项目中就不需要像以前一样去实例每一个TestBLLImpl项目中的类，使用AutoFac把每个类注册给他的接口
//然后直接调用接口对象就可以了，而且你都不用明白到底是哪个一个类实现该接口
//从而实现了解耦
IUserBll userBll = container.Resolve <IUserBll>();
userBll.Login("shanzm", "123456");
Console.WriteLine(userBll.GetType());//调试时查看uerBll接口对象中的具体实现对象:TestBllImpl.UserBll
}
private static void UseAutoFac7()
{
ContainerBuilder builder = new ContainerBuilder();
Assembly asm = Assembly.Load(" TestBLLImpl");
//这里通过使用SingleInstance()实现注册给接口的实现类的对象以单例模式
builder.RegisterAssemblyTypes(asm).AsImplementedInterfaces().SingleInstance();
IContainer container = builder.Build();
using (var scope1 = container.BeginLifetimeScope())
{
IUserBll userBll1 = scope1.Resolve <IUserBll>();
userBll1.Login("shanzm", "1111");
using (var scope2 = container.BeginLifetimeScope())
{
IUserBll userBll2 = scope2.Resolve <IUserBll>();
userBll2.Login("shanzm", "2222");
Console.WriteLine(ReferenceEquals(userBll1, userBll2));
//因为是单一实例，所以就是在不同的生命周期中，也是同一个实例，打印结果:true
}
}
}
void OnLoginRequest(IMessage msg, SessionEventArgs e, bool reLogin = false)
{
var loginInfo = msg.Obj as LoginInfo;
LoginState state = LoginState.Failed;
if (loginInfo != null)
{
var session = Global.GetSession(new UserSessionIdMetaData
{
Account = loginInfo.User.Account
});
if (!reLogin && session != null)
{
state = LoginState.LoggedIn;
goto Response;
}
if (reLogin && session != null)
{
session.SessionId = null;
}
try
{
state = _userBll.Login(loginInfo.User);
if (state == LoginState.NotAudit)
{
e.Session.SessionId = new UserSessionIdMetaData
{
Id = loginInfo.User.Id,
Account = loginInfo.User.Account
};
goto Response;
}
if (state == LoginState.Successed)
{
if (!reLogin)
{
var clientSession = Global.GetSession(new UserSessionIdMetaData
{
Account = loginInfo.User.Account,
IsClient = true
});
if (clientSession == null)
{
state = LoginState.ClientOffline;
goto Response;
}
var clientLoginUpdateInfo = (clientSession.SessionId as UserSessionIdMetaData).UpdateInfo;
var clientLastUpdateInfo = CacheManager.GetUpdateInfo(2, _updateInfoCtreator);
if (clientLastUpdateInfo != null)
{
if (clientLoginUpdateInfo == null ||
(clientLastUpdateInfo.Version.Equals(
clientLoginUpdateInfo.Version, StringComparison.InvariantCultureIgnoreCase) &&
clientLastUpdateInfo.LastUpdateTime >= clientLoginUpdateInfo.LastUpdateTime))
{
state = LoginState.ClientIsNotLatestVersion;
}
goto Response;
}
if (_hangUpTimeBll.TotalMinutes(loginInfo.User.Id) < 6 * 60)
{
state = LoginState.HangUpTimeNotEnough;
goto Response;
}
}
}
}
catch (Exception ex)
{
ErrorLog(msg.Header.Type, ex);
state = LoginState.Failed;
}
}
Response:
if (state == LoginState.Successed)
{
e.Session.SessionId = new UserSessionIdMetaData
{
Id = loginInfo.User.Id,
Account = loginInfo.User.Account
};
}
e.Session.Send(state, reLogin ?
MessageType.ReLoginResponse : MessageType.LoginResponse);
}
